5:08 a.m.
This option was removed from qemu for no apparent reason except to
break existing consumers. It does the same as -no-user-config, added
in May 2012, so use that instead.
---
builder/test-console.sh | 2 +-
common/qemuopts/qemuopts-tests.c | 6 +++---
common/qemuopts/qemuopts.c | 2 +-
contrib/p2v/build-p2v-iso.sh | 2 +-
contrib/p2v/test-p2v-iso.sh | 2 +-
customize/test-firstboot.sh | 2 +-
customize/test-password.pl | 2 +-
customize/test-settings.sh | 2 +-
lib/launch-direct.c | 4 ++--
p2v/test-virt-p2v-pxe.sh | 2 +-
utils/boot-analysis/boot-analysis-timeline.c | 4 ++--
11 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/builder/test-console.sh b/builder/test-console.sh
index 64e5b1788..4f204f3c8 100755
--- a/builder/test-console.sh
+++ b/builder/test-console.sh
@@ -84,7 +84,7 @@ rm -f "$out"
# Boot the guest in qemu with a serial console. Allow it to run
# for a set amount of time, and then kill it.
$qemu \
- -nodefconfig \
+ -no-user-config \
-display none \
-machine accel=kvm:tcg \
-m 1024 \
diff --git a/common/qemuopts/qemuopts-tests.c b/common/qemuopts/qemuopts-tests.c
index bb7d24d59..f8e68aef4 100644
--- a/common/qemuopts/qemuopts-tests.c
+++ b/common/qemuopts/qemuopts-tests.c
@@ -70,7 +70,7 @@ main (int argc, char *argv[])
qemuopts_set_binary (qopts, "qemu-system-x86_64"));
CHECK_ERROR (-1, "qemuopts_add_flag",
- qemuopts_add_flag (qopts, "-nodefconfig"));
+ qemuopts_add_flag (qopts, "-no-user-config"));
CHECK_ERROR (-1, "qemuopts_add_arg",
qemuopts_add_arg (qopts, "-m", "1024"));
CHECK_ERROR (-1, "qemuopts_add_arg_format",
@@ -116,7 +116,7 @@ main (int argc, char *argv[])
const char *expected =
"qemu-system-x86_64 \\\n"
- " -nodefconfig \\\n"
+ " -no-user-config \\\n"
" -m 1024 \\\n"
" -smp 4 \\\n"
" -drive file=/tmp/foo,if=ide \\\n"
@@ -139,7 +139,7 @@ main (int argc, char *argv[])
actual_argv = qemuopts_to_argv (qopts));
const char *expected_argv[] = {
"qemu-system-x86_64",
- "-nodefconfig",
+ "-no-user-config",
"-m", "1024",
"-smp", "4",
"-drive", "file=/tmp/foo,if=ide",
diff --git a/common/qemuopts/qemuopts.c b/common/qemuopts/qemuopts.c
index 3a8dcae70..53dc8c2a3 100644
--- a/common/qemuopts/qemuopts.c
+++ b/common/qemuopts/qemuopts.c
@@ -196,7 +196,7 @@ last_option (struct qemuopts *qopts)
/**
* Add a command line flag which has no argument. eg:
*
- * qemuopts_add_flag (qopts, "-nodefconfig");
+ * qemuopts_add_flag (qopts, "-no-user-config");
*
* Returns C<0> on success. Returns C<-1> on error, setting C<errno>.
*/
diff --git a/contrib/p2v/build-p2v-iso.sh b/contrib/p2v/build-p2v-iso.sh
index ae25cebc8..2c6bd105b 100755
--- a/contrib/p2v/build-p2v-iso.sh
+++ b/contrib/p2v/build-p2v-iso.sh
@@ -139,7 +139,7 @@ virt-builder $osversion --arch $arch \
--selinux-relabel
# Run the guest.
-qemu-system-x86_64 -nodefconfig -nodefaults -nographic \
+qemu-system-x86_64 -no-user-config -nodefaults -nographic \
-no-reboot \
-machine accel=kvm:tcg \
-cpu host \
diff --git a/contrib/p2v/test-p2v-iso.sh b/contrib/p2v/test-p2v-iso.sh
index cdc4a5412..ff6453b79 100755
--- a/contrib/p2v/test-p2v-iso.sh
+++ b/contrib/p2v/test-p2v-iso.sh
@@ -49,7 +49,7 @@ disk=$tmpdir/guest.img
virt-builder rhel-6.8 --output $disk
# Boot the guest as if running with virt-p2v ISO in the CD drive.
-qemu-system-x86_64 -nodefconfig -nodefaults \
+qemu-system-x86_64 -no-user-config -nodefaults \
-no-reboot \
-machine accel=kvm:tcg \
-cpu host \
diff --git a/customize/test-firstboot.sh b/customize/test-firstboot.sh
index 68f316dd9..bf26b2da6 100755
--- a/customize/test-firstboot.sh
+++ b/customize/test-firstboot.sh
@@ -116,7 +116,7 @@ rm -f $bat1 $bat2
# Adding a network device is not strictly necessary, but makes
# the Debian 7 guest happier.
$qemu \
- -nodefconfig \
+ -no-user-config \
-display none \
-machine accel=kvm:tcg \
-m 2048 \
diff --git a/customize/test-password.pl b/customize/test-password.pl
index f39d7b44f..b2fca6b2e 100755
--- a/customize/test-password.pl
+++ b/customize/test-password.pl
@@ -98,7 +98,7 @@ system ("virt-builder", $guestname, "--quiet",
# Run qemu and make sure we get to the login prompt.
my $exp = Expect->spawn ($qemu,
- "-nodefconfig", "-display",
"none",
+ "-no-user-config", "-display",
"none",
"-machine", "accel=kvm:tcg",
"-m", "1024", "-boot",
"c",
"-drive", "file=$disk,format=raw,if=ide",
diff --git a/customize/test-settings.sh b/customize/test-settings.sh
index a86c9da9e..84e3a1fae 100755
--- a/customize/test-settings.sh
+++ b/customize/test-settings.sh
@@ -123,7 +123,7 @@ virt-builder "$guestname" \
#
# Use IDE because some ancient guests don't support anything else.
$qemu \
- -nodefconfig \
+ -no-user-config \
-display none \
-machine accel=kvm:tcg \
-m 2048 \
diff --git a/lib/launch-direct.c b/lib/launch-direct.c
index 496b333c1..1e51d2a45 100644
--- a/lib/launch-direct.c
+++ b/lib/launch-direct.c
@@ -480,8 +480,8 @@ launch_direct (guestfs_h *g, void *datav, const char *arg)
*/
arg ("-global", VIRTIO_DEVICE_NAME ("virtio-blk")
".scsi=off");
- if (guestfs_int_qemu_supports (g, data->qemu_data, "-nodefconfig"))
- flag ("-nodefconfig");
+ if (guestfs_int_qemu_supports (g, data->qemu_data, "-no-user-config"))
+ flag ("-no-user-config");
/* This oddly named option doesn't actually enable FIPS. It just
* causes qemu to do the right thing if FIPS is enabled in the
diff --git a/p2v/test-virt-p2v-pxe.sh b/p2v/test-virt-p2v-pxe.sh
index ebb9ed853..115d1730f 100755
--- a/p2v/test-virt-p2v-pxe.sh
+++ b/p2v/test-virt-p2v-pxe.sh
@@ -78,7 +78,7 @@ cmdline="root=/dev/sda4 ro console=ttyS0 printk.time=1
p2v.server=10.0.2.2 p2v.p
# Run virt-p2v inside qemu.
$qemu \
- -nodefconfig \
+ -no-user-config \
-display none \
-machine accel=kvm:tcg \
-m 2048 \
diff --git a/utils/boot-analysis/boot-analysis-timeline.c
b/utils/boot-analysis/boot-analysis-timeline.c
index 3ff031487..4b7da31fa 100644
--- a/utils/boot-analysis/boot-analysis-timeline.c
+++ b/utils/boot-analysis/boot-analysis-timeline.c
@@ -195,7 +195,7 @@ construct_timeline (void)
/* Find where we run qemu. */
FIND_OPTIONAL ("qemu", LONG_ACTIVITY,
data->events[j].source == GUESTFS_EVENT_APPLIANCE &&
- strstr (data->events[j].message, "-nodefconfig"),
+ strstr (data->events[j].message, "-no-user-config"),
data->events[k].source == GUESTFS_EVENT_CLOSE);
/* For the libvirt backend, connecting to libvirt, getting
@@ -259,7 +259,7 @@ construct_timeline (void)
/* From starting qemu up to entering the BIOS is the qemu overhead. */
FIND_OPTIONAL ("qemu:overhead", 0,
data->events[j].source == GUESTFS_EVENT_APPLIANCE &&
- strstr (data->events[j].message, "-nodefconfig"),
+ strstr (data->events[j].message, "-no-user-config"),
data->events[k].source == GUESTFS_EVENT_APPLIANCE &&
strstr (data->events[k].message, FIRST_FIRMWARE_MESSAGE));
--
2.19.0.rc0