[PATCH] appliance/init: provide a symlink /var/lock
by Pino Toscano
Provide /var/lock as symlink to /run/lock, as it might be used by
applications.
---
appliance/init | 1 +
1 file changed, 1 insertion(+)
diff --git a/appliance/init b/appliance/init
index b25ea26..aac3f5a 100755
--- a/appliance/init
+++ b/appliance/init
@@ -32,6 +32,7 @@ mount -t sysfs /sys /sys
mkdir -p /run
mount -t tmpfs -o "nosuid,size=20%,mode=0755" tmpfs /run
mkdir -p /run/lock
+ln -s ../run/lock /var/lock
# devtmpfs is required since udev 176
mount -t devtmpfs /dev /dev
--
1.8.3.1
10 years, 9 months
- 2
- 2
[PATCH 0/3] virt-resize: preserve GPT partitions label
by Pino Toscano
Hi,
attached there are few patches to implement a way to get the label of
GPT partitions (refactoring an existing function and adding a new
daemon API) and using it in virt-resize to restore them when copying
partitions.
Thanks,
Pino Toscano (3):
daemon: parted: refactor sgdisk info parsing code
New API: part-get-name (RHBZ#593511).
resize: preserve GPT partition names (RHBZ#1060404).
daemon/parted.c | 86 ++++++++++++++++++++++++++++++++++++++++++----------
generator/actions.ml | 13 ++++++++
resize/resize.ml | 19 +++++++++++-
src/MAX_PROC_NR | 2 +-
4 files changed, 102 insertions(+), 18 deletions(-)
--
1.8.3.1
10 years, 9 months
- 2
- 9
progress output during guestfish sh commands
by Olaf Hering
Is there any way to flush the output of a long running 'guestfish sh
cmd.sh' call?
It seems to me that output is only shown once cmd.sh has finished. I
already split cmd.sh into smaller pieces to see overall progress. But
output from a verbose, long running single command within cmd.sh is not
shown.
Olaf
10 years, 9 months
- 2
- 3
[PATCH] resize: properly restore GPT partition types
by Pino Toscano
If there is a GPT partition layout, then what should be read and
restored for each partition is the GPT type and not the MBR ID.
Related to RHBZ#1060404.
---
resize/resize.ml | 46 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 35 insertions(+), 11 deletions(-)
diff --git a/resize/resize.ml b/resize/resize.ml
index 8683df7..a2670e5 100644
--- a/resize/resize.ml
+++ b/resize/resize.ml
@@ -48,6 +48,7 @@ type partition = {
p_part : G.partition; (* SOURCE partition data from libguestfs. *)
p_bootable : bool; (* Is it bootable? *)
p_mbr_id : int option; (* MBR ID, if it has one. *)
+ p_gpt_type : string option; (* GPT ID, if it has one. *)
p_type : partition_content; (* Content type and content size. *)
(* What we're going to do: *)
@@ -75,7 +76,14 @@ let rec debug_partition p =
p.p_part.G.part_size;
eprintf "\tbootable: %b\n" p.p_bootable;
eprintf "\tpartition ID: %s\n"
- (match p.p_mbr_id with None -> "(none)" | Some i -> sprintf "0x%x" i);
+ (match p.p_mbr_id, p.p_gpt_type with
+ | None, None -> "(none)"
+ | Some i, None -> sprintf "0x%x" i
+ | None, Some i -> i
+ | Some _, Some _ ->
+ (* This should not happen. *)
+ assert false
+ );
eprintf "\tcontent: %s\n" (string_of_partition_content p.p_type)
and string_of_partition_content = function
| ContentUnknown -> "unknown data"
@@ -440,15 +448,21 @@ read the man page virt-resize(1).
let part_num = Int32.to_int part_num in
let name = sprintf "/dev/sda%d" part_num in
let bootable = g#part_get_bootable "/dev/sda" part_num in
- let mbr_id =
- try Some (g#part_get_mbr_id "/dev/sda" part_num)
- with G.Error _ -> None in
+ let mbr_id, gpt_type =
+ match parttype with
+ | GPT ->
+ None, (try Some (g#part_get_gpt_type "/dev/sda" part_num)
+ with G.Error _ -> None)
+ | MBR ->
+ (try Some (g#part_get_mbr_id "/dev/sda" part_num)
+ with G.Error _ -> None), None in
let typ =
if is_extended_partition mbr_id then ContentExtendedPartition
else get_partition_content name in
{ p_name = name; p_part = part;
- p_bootable = bootable; p_mbr_id = mbr_id; p_type = typ;
+ p_bootable = bootable; p_mbr_id = mbr_id; p_gpt_type = gpt_type;
+ p_type = typ;
p_operation = OpCopy; p_target_partnum = 0;
p_target_start = 0L; p_target_end = 0L }
) parts in
@@ -1025,7 +1039,8 @@ read the man page virt-resize(1).
p_name = "";
p_part = { G.part_num = 0l; part_start = 0L; part_end = 0L;
part_size = 0L };
- p_bootable = false; p_mbr_id = None; p_type = ContentUnknown;
+ p_bootable = false; p_mbr_id = None; p_gpt_type = None;
+ p_type = ContentUnknown;
(* Target information is meaningful. *)
p_operation = OpIgnore;
@@ -1103,11 +1118,20 @@ read the man page virt-resize(1).
if p.p_bootable then
g#part_set_bootable "/dev/sdb" p.p_target_partnum true;
- (match p.p_mbr_id with
- | None -> ()
- | Some mbr_id ->
- g#part_set_mbr_id "/dev/sdb" p.p_target_partnum mbr_id
- );
+ match parttype with
+ | GPT ->
+ (match p.p_gpt_type with
+ | None -> ()
+ | Some gpt_type ->
+ g#part_set_gpt_type "/dev/sdb" p.p_target_partnum gpt_type
+ )
+ | MBR ->
+ (match p.p_mbr_id with
+ | None -> ()
+ | Some mbr_id ->
+ g#part_set_mbr_id "/dev/sdb" p.p_target_partnum mbr_id
+ )
+
) partitions;
(* Fix the bootloader if we aligned the first partition. *)
--
1.8.3.1
10 years, 9 months
- 2
- 2
[PATCH] hivex: python: value_value no longer generates Unicode strings
by Hilko Bengen
This fixes Github issue #2 reported by "kupiakos".
<https://github.com/libguestfs/hivex/issues/2>
---
generator/generator.ml | 2 +-
python/t/210-setvalue.py | 26 +++++++++++++++++---------
2 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/generator/generator.ml b/generator/generator.ml
index 908c5f3..02aaf12 100755
--- a/generator/generator.ml
+++ b/generator/generator.ml
@@ -2981,7 +2981,7 @@ put_val_type (char *val, size_t len, hive_type t)
{
PyObject *r = PyTuple_New (2);
PyTuple_SetItem (r, 0, PyLong_FromLong ((long) t));
- PyTuple_SetItem (r, 1, PyUnicode_DecodeUTF8 (val, len, NULL));
+ PyTuple_SetItem (r, 1, PyBytes_FromStringAndSize (val, len));
return r;
}
diff --git a/python/t/210-setvalue.py b/python/t/210-setvalue.py
index 2ee7ac5..8e7ed5c 100644
--- a/python/t/210-setvalue.py
+++ b/python/t/210-setvalue.py
@@ -19,6 +19,14 @@ import sys
import os
import hivex
+if sys.version >= '3':
+ import codecs
+ def b(x):
+ return codecs.encode(x)
+else:
+ def b(x):
+ return x
+
srcdir = os.environ["srcdir"]
if not srcdir:
srcdir = "."
@@ -32,27 +40,27 @@ assert root
h.node_add_child (root, "B")
-b = h.node_get_child (root, "B")
-assert b
+B = h.node_get_child (root, "B")
+assert B
values = [
{ "key": "Key1", "t": 3, "value": "ABC" },
{ "key": "Key2", "t": 3, "value": "DEF" }
]
-h.node_set_values (b, values)
+h.node_set_values (B, values)
value1 = { "key": "Key3", "t": 3, "value": "GHI" }
-h.node_set_value (b, value1)
+h.node_set_value (B, value1)
value1 = { "key": "Key1", "t": 3, "value": "JKL" }
-h.node_set_value (b, value1)
+h.node_set_value (B, value1)
-val = h.node_get_value (b, "Key1")
+val = h.node_get_value (B, "Key1")
t_data = h.value_value (val)
assert t_data[0] == 3
-assert t_data[1] == "JKL"
+assert t_data[1] == b("JKL")
-val = h.node_get_value (b, "Key3")
+val = h.node_get_value (B, "Key3")
t_data = h.value_value (val)
assert t_data[0] == 3
-assert t_data[1] == "GHI"
+assert t_data[1] == b("GHI")
--
1.9.rc1
10 years, 9 months
- 2
- 1
Re: [Libguestfs] Double fault panic in L2 upon v2v conversion
by Rom Freiman
Kashyap, just to be sure - it happens to you during the v2v
conversion? on L2? While L1 and L0 works fine afterwords, right?
Thanks
On Fri, Jan 17, 2014 at 4:45 PM, Kashyap Chamarthy <kchamart(a)redhat.com> wrote:
> On 01/17/2014 03:38 PM, Richard W.M. Jones wrote:
>> On Fri, Jan 17, 2014 at 04:14:03PM +0200, Rom Freiman wrote:
>>> How do you know that the problem is with KVM/QEMU and not with libguestfs?
>>
>> The guestfsd daemon is simply running the regular 'mount' command.
>> The mount command causes the kernel to panic. There should be no
>> circumstances where running an ordinary command like that, albeit as
>> root, should cause the kernel to panic. Unless the kernel (or in this
>> case, something underneath the kernel) is broken.
>>
>> mount -o ro /dev/sdb /sysroot/
>> [ 12.645305] PANIC: double fault, error_code: 0x0
>> [ 12.645305] CPU: 0 PID: 141 Comm: mount Not tainted
>> 3.11.8-200.strato0002.fc19.strato.c3850ae03e9d.x86_64 #1
>> [ 12.645305] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
>> [ 12.645305] task: ffff88001cc816e0 ti: ffff88001cde6000 task.ti:
>> ffff88001cde6000
>> [ 12.645305] RIP: 0033:[<00007fa602c5b99b>] [<00007fa602c5b99b>]
>> 0x7fa602c5b99a
>> [ 12.645305] RSP: 002b:00007fff4f5884a0 EFLAGS: 00010216
>> [ 12.645305] RAX: 00007fa602008ff8 RBX: 00007fa601ff0000 RCX: 00007fa601ff0000
>> [ 12.645305] RDX: 00000000003b7068 RSI: 00007fff4f588560 RDI: 00007fa601ff3d18
>> [ 12.645305] RBP: 00007fff4f5885d0 R08: 00007fa60200f310 R09: 0000000000000000
>> [ 12.645305] R10: 0000000000000022 R11: 00007fa60200f310 R12: 00007fa60200e9b0
>> [ 12.645305] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fa602e6e990
>> [ 12.645305] FS: 00007fa602e69880(0000) GS:ffff88001f000000(0000)
>> knlGS:0000000000000000
>> [ 12.645305] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>> [ 12.645305] CR2: 0000000000000000 CR3: 000000001d7fb000 CR4: 00000000000006f0
>> [ 12.645305]
>> [ 12.645305] Kernel panic - not syncing: Machine halted.
>> [ 12.645305] CPU: 0 PID: 141 Comm: mount Not tainted
>> 3.11.8-200.strato0002.fc19.strato.c3850ae03e9d.x86_64 #1
>> [ 12.645305] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
>> [ 12.645305] ffff88001f005f58 ffff88001f005e90 ffffffff8164024b
>> ffffffff819e89dc
>> [ 12.645305] ffff88001f005f08 ffffffff8163c272 0000000000000008
>> ffff88001f005f18
>> [ 12.645305] ffff88001f005eb8 ffffffff8163c8e5 0000000000000046
>> 00000000000000b1
>> [ 12.645305] Call Trace:
>> [ 12.645305] <#DF> [<ffffffff8164024b>] dump_stack+0x45/0x56
>> [ 12.645305] [<ffffffff8163c272>] panic+0xc8/0x1d7
>> [ 12.645305] [<ffffffff8163c8e5>] ? printk+0x67/0x69
>> [ 12.645305] [<ffffffff81048ae1>] df_debug+0x31/0x40
>> [ 12.645305] [<ffffffff810132ed>] do_double_fault+0x5d/0x80
>> [ 12.645305] [<ffffffff81650b88>] double_fault+0x28/0x30
>> [ 12.645305] <<EOE>>
>
> Correct.
>
> I encountered this same double_fault panic a week ago:
>
>
> http://kashyapc.fedorapeople.org/temp/double-fault-panic-nested-kvm-envir...
>
> With these versions:
>
> $ uname -r ; rpm -q libvirt qemu-system-x86
> 3.11.10-301.fc20.x86_64
> libvirt-1.1.3.1-2.fc20.x86_64
> qemu-system-x86-1.6.1-2.fc20.x86_64
>
> When I briefly discussed this double fault panic with Paolo Bonzini (KVM
> maintainer), he mentioned it is probably a host hypervisor bug. But this
> needs more investigation (ftrace for nested guest, x86info in L1 and L2
> - if possible).
>
>
> Answering Rom's earlier question ("Kashyap, can you please share your
> experience?"): Yes, ested virtualization with KVM and Intel is not
> *really* the most stable, but there's on going work upstream to improve
> this and fix bbugs.
>
> Refer these recent bugs I filed while in a nested KVM environment:
>
> https://bugzilla.kernel.org/show_bug.cgi?id=67761
> https://bugzilla.kernel.org/show_bug.cgi?id=68051
> https://bugzilla.kernel.org/show_bug.cgi?id=67751
>
>
>
> --
> /kashyap
10 years, 9 months
- 4
- 11
libguestfs-test-tool hangs on Btrfs
by Kashyap Chamarthy
A simple libguestfs-test-tool invocation on Btrfs machine hangs as noted
below.
Versions and related details here:
https://bugzilla.redhat.com/show_bug.cgi?id=1060126
Complete strace:
http://kashyapc.fedorapeople.org/temp/qemu-strace.log
----------------
$ libguestfs-test-tool
************************************************************
* IMPORTANT NOTICE
*
* When reporting bugs, include the COMPLETE, UNEDITED
* output below in your bug report.
*
************************************************************
LIBGUESTFS_QEMU=/root/qemu-strace.sh
LIBGUESTFS_BACKEND=direct
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/root/bin:/root/bin
SELinux: Enforcing
guestfs_get_append: (null)
guestfs_get_autosync: 1
guestfs_get_backend: direct
guestfs_get_backend_settings: []
guestfs_get_cachedir: /var/tmp
guestfs_get_direct: 0
guestfs_get_hv: /root/qemu-strace.sh
guestfs_get_memsize: 500
guestfs_get_network: 0
guestfs_get_path: /usr/lib64/guestfs
guestfs_get_pgroup: 0
guestfs_get_program: libguestfs-test-tool
guestfs_get_recovery_proc: 1
guestfs_get_selinux: 0
guestfs_get_smp: 1
guestfs_get_tmpdir: /tmp
guestfs_get_trace: 0
guestfs_get_verbose: 1
host_cpu: x86_64
Launching appliance, timeout set to 600 seconds.
libguestfs: launch: program=libguestfs-test-tool
libguestfs: launch: version=1.25.29fedora=21,release=1.fc21,libvirt
libguestfs: launch: backend registered: unix
libguestfs: launch: backend registered: uml
libguestfs: launch: backend registered: libvirt
libguestfs: launch: backend registered: direct
libguestfs: launch: backend=direct
libguestfs: launch: tmpdir=/tmp/libguestfshdxOLe
libguestfs: launch: umask=0022
libguestfs: launch: euid=0
libguestfs: command: run: /usr/bin/supermin-helper
libguestfs: command: run: \ --verbose
libguestfs: command: run: \ -f checksum
libguestfs: command: run: \ --host-cpu x86_64
libguestfs: command: run: \ /usr/lib64/guestfs/supermin.d
supermin helper [00000ms] whitelist = (not specified)
supermin helper [00000ms] host_cpu = x86_64
supermin helper [00000ms] dtb_wildcard = (not specified)
supermin helper [00000ms] inputs:
supermin helper [00000ms] inputs[0] = /usr/lib64/guestfs/supermin.d
supermin helper [00000ms] outputs:
supermin helper [00000ms] kernel = (none)
supermin helper [00000ms] dtb = (none)
supermin helper [00000ms] initrd = (none)
supermin helper [00000ms] appliance = (none)
checking modpath /lib/modules/3.14.0-0.rc0.git12.1.fc21.x86_64 is a
directory
checking modpath /lib/modules/3.11.10-301.fc20.x86_64 is a directory
checking modpath /lib/modules/3.12.8-300.fc20.x86_64 is a directory
picked kernel vmlinuz-3.14.0-0.rc0.git12.1.fc21.x86_64
supermin helper [00013ms] finished creating kernel
supermin helper [00015ms] visiting /usr/lib64/guestfs/supermin.d
supermin helper [00016ms] visiting /usr/lib64/guestfs/supermin.d/base.img.gz
supermin helper [00020ms] visiting
/usr/lib64/guestfs/supermin.d/daemon.img.gz
supermin helper [00024ms] visiting /usr/lib64/guestfs/supermin.d/hostfiles
supermin helper [05285ms] visiting /usr/lib64/guestfs/supermin.d/init.img
supermin helper [05291ms] visiting
/usr/lib64/guestfs/supermin.d/udev-rules.img
supermin helper [05294ms] adding kernel modules
supermin helper [09466ms] finished creating appliance
libguestfs: checksum of existing appliance:
6528eb9d1b1b320de069e8331ddaffec806488dc13e45c11baf260a423b803ba
libguestfs: [09657ms] begin building supermin appliance
libguestfs: [09747ms] run supermin-helper
libguestfs: command: run: /usr/bin/supermin-helper
libguestfs: command: run: \ --verbose
libguestfs: command: run: \ --copy-kernel
libguestfs: command: run: \ -f ext2
libguestfs: command: run: \ --host-cpu x86_64
libguestfs: command: run: \ /usr/lib64/guestfs/supermin.d
libguestfs: command: run: \ --output-kernel /var/tmp/guestfs.Xvcxiu/kernel
libguestfs: command: run: \ --output-initrd /var/tmp/guestfs.Xvcxiu/initrd
libguestfs: command: run: \ --output-appliance /var/tmp/guestfs.Xvcxiu/root
supermin helper [00000ms] whitelist = (not specified)
supermin helper [00000ms] host_cpu = x86_64
supermin helper [00000ms] dtb_wildcard = (not specified)
supermin helper [00000ms] inputs:
supermin helper [00000ms] inputs[0] = /usr/lib64/guestfs/supermin.d
supermin helper [00000ms] outputs:
supermin helper [00000ms] kernel = /var/tmp/guestfs.Xvcxiu/kernel
supermin helper [00000ms] dtb = (none)
supermin helper [00000ms] initrd = /var/tmp/guestfs.Xvcxiu/initrd
supermin helper [00000ms] appliance = /var/tmp/guestfs.Xvcxiu/root
checking modpath /lib/modules/3.14.0-0.rc0.git12.1.fc21.x86_64 is a
directory
checking modpath /lib/modules/3.11.10-301.fc20.x86_64 is a directory
checking modpath /lib/modules/3.12.8-300.fc20.x86_64 is a directory
picked kernel vmlinuz-3.14.0-0.rc0.git12.1.fc21.x86_64
picked kernel vmlinuz-3.14.0-0.rc0.git12.1.fc21.x86_64
supermin helper [00473ms] finished creating kernel
supermin helper [05225ms] finished mke2fs
supermin helper [05227ms] visiting /usr/lib64/guestfs/supermin.d
supermin helper [05227ms] visiting /usr/lib64/guestfs/supermin.d/base.img.gz
supermin helper [57383ms] visiting
/usr/lib64/guestfs/supermin.d/daemon.img.gz
supermin helper [57795ms] visiting /usr/lib64/guestfs/supermin.d/hostfiles
supermin helper [128017ms] visiting /usr/lib64/guestfs/supermin.d/init.img
supermin helper [128020ms] visiting
/usr/lib64/guestfs/supermin.d/udev-rules.img
supermin helper [128033ms] adding kernel modules
supermin helper [192314ms] closing ext2 filesystem
supermin helper [192368ms] finished creating appliance
libguestfs: [202159ms] finished building supermin appliance
libguestfs: command: run: rm
libguestfs: command: run: \ -rf /var/tmp/guestfs.Xvcxiu
libguestfs: [202426ms] begin testing qemu features
libguestfs: command: run: /root/qemu-strace.sh
libguestfs: command: run: \ -display none
libguestfs: command: run: \ -help
libguestfs: command: run: /root/qemu-strace.sh
libguestfs: command: run: \ -display none
libguestfs: command: run: \ -version
libguestfs: qemu version 1.7
libguestfs: command: run: /root/qemu-strace.sh
libguestfs: command: run: \ -display none
libguestfs: command: run: \ -machine accel=kvm:tcg
libguestfs: command: run: \ -device ?
libguestfs: [204130ms] finished testing qemu features
[204141ms] /root/qemu-strace.sh \
-global virtio-blk-pci.scsi=off \
-nodefconfig \
-enable-fips \
-nodefaults \
-display none \
-machine accel=kvm:tcg \
-m 500 \
-no-reboot \
-rtc driftfix=slew \
-no-hpet \
-global kvm-pit.lost_tick_policy=discard \
-kernel /var/tmp/.guestfs-0/kernel.48091 \
-initrd /var/tmp/.guestfs-0/initrd.48091 \
-device virtio-scsi-pci,id=scsi \
-drive
file=/tmp/libguestfshdxOLe/scratch.1,cache=unsafe,format=raw,id=hd0,if=none
\
-device scsi-hd,drive=hd0 \
-drive
file=/var/tmp/.guestfs-0/root.48091,snapshot=on,id=appliance,cache=unsafe,if=none
\
-device scsi-hd,drive=appliance \
-device virtio-serial-pci \
-serial stdio \
-device sga \
-chardev socket,path=/tmp/libguestfshdxOLe/guestfsd.sock,id=channel0 \
-device virtserialport,chardev=channel0,name=org.libguestfs.channel.0 \
-append 'panic=1 console=ttyS0 udevtimeout=600 no_timer_check
acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0
guestfs_verbose=1 TERM=screen'
\x1b[1;256r\x1b[256;256H\x1b[6n
Google, Inc.
Serial Graphics Adapter 08/14/13
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (mockbuild@) Wed
Aug 14 23:57:08 UTC 2013
Term: 80x24
4 0
SeaBIOS (version ?-20130815_004056-)
Booting from ROM...
Probing EDD (edd=off to disable)... ok
\x1b[2J[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.0-0.rc0.git12.1.fc21.x86_64
(mockbuild(a)bkernel01.phx2.fedoraproject.org) (gcc version 4.8.2 20140120
(Red Hat 4.8.2-13) (GCC) ) #1 SMP Mon Jan
27 20:02:51 UTC 2014
[ 0.000000] Command line: panic=1 console=ttyS0 udevtimeout=600
no_timer_check acpi=off printk.time=1 cgroup_disable=memory
root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=sc
reen
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f3fdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f3fe000-0x000000001f3fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff]
reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: last_pfn = 0x1f3fe max_arch_pfn = 0x400000000
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [mem 0x000f17f0-0x000f17ff] mapped
at [ffff8800000f17f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1f1fffff]
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1effffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fdfff]
[ 0.000000] RAMDISK: [mem 0x1f255000-0x1f3effff]
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001f3fdfff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1f3fdfff]
[ 0.000000] NODE_DATA [mem 0x1f22e000-0x1f254fff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1f1ae001, boot clock
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1f3fdfff]
[ 0.000000] SFI: Simple Firmware Interface v0.81
http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: BOCHSCPU
[ 0.000000] MPTABLE: Product ID: 0.1
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] Processors: 1
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x1f400000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 478 pages/cpu @ffff88001ee00000 s1926912
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1ee0e280
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 125879
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: panic=1 console=ttyS0
udevtimeout=600 no_timer_check acpi=off printk.time=1
cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1
TERM=screen
[ 0.000000] Disabling memory control group subsystem
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Memory: 467848K/511600K available (7875K kernel code,
1605K rwdata, 3292K rodata, 3688K init, 12860K bss, 43752K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] \tRCU lockdep checking is enabled.
[ 0.000000] \tRCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:524544 nr_irqs:256 16
[ 0.000000] Console: colour *CGA 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] tsc: Detected 1864.644 MHz processor
[ 0.003000] Calibrating delay loop (skipped) preset value.. 3729.28
BogoMIPS (lpj=1864644)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.005454] Security Framework initialized
[ 0.006024] SELinux: Disabled at boot.
[ 0.008249] Dentry cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.009431] Inode-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.010204] Mount-cache hash table entries: 256
[ 0.014358] Initializing cgroup subsys memory
[ 0.015052] Initializing cgroup subsys devices
[ 0.016047] Initializing cgroup subsys freezer
[ 0.017066] Initializing cgroup subsys net_cls
[ 0.018024] Initializing cgroup subsys blkio
[ 0.019014] Initializing cgroup subsys perf_event
[ 0.020026] Initializing cgroup subsys hugetlb
[ 0.021332] mce: CPU supports 10 MCE banks
[ 0.022122] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.022122] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.022122] tlb_flushall_shift: 6
[ 0.041195] Freeing SMP alternatives memory: 24K (ffffffff8212d000 -
ffffffff82133000)
[ 0.051525] ftrace: allocating 26492 entries in 104 pages
[ 0.093233] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.094009] smpboot: CPU0: Intel QEMU Virtual CPU version 1.7.0 (fam:
06, model: 06, stepping: 03)
[ 0.201485] Performance Events: Broken PMU hardware detected, using
software events only.
[ 0.203007] Failed to access perfctr msr (MSR c1 is 0)
[ 0.214943] watchdog: disabled (inside virtual machine)
[ 0.215008] x86: Booted up 1 node, 1 CPUs
[ 0.216008] smpboot: Total of 1 processors activated (3729.28 BogoMIPS)
[ 0.226504] devtmpfs: initialized
[ 0.253274] atomic64 test passed for x86-64 platform with CX8 and
with SSE
[ 0.254007] pinctrl core: initialized pinctrl subsystem
[ 0.256008] RTC time: 12:52:48, date: 01/30/14
[ 0.258350] NET: Registered protocol family 16
[ 0.262951] cpuidle: using governor menu
[ 0.267208] PCI: Using configuration type 1 for base access
[ 0.334798] bio: create slab <bio-0> at 0
[ 0.337679] ACPI: Interpreter disabled.
[ 0.341059] vgaarb: loaded
[ 0.345200] SCSI subsystem initialized
[ 0.349069] usbcore: registered new interface driver usbfs
[ 0.351505] usbcore: registered new interface driver hub
[ 0.352455] usbcore: registered new device driver usb
[ 0.355416] PCI: Probing PCI hardware
[ 0.358544] PCI host bridge to bus 0000:00
[ 0.359039] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.360033] pci_bus 0000:00: root bus resource [mem
0x00000000-0xffffffffff]
[ 0.361028] pci_bus 0000:00: No busn resource found for root bus,
will use [bus 00-ff]
[ 0.445614] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by
PIIX4 ACPI
[ 0.447013] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by
PIIX4 SMB
[ 0.564029] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
[ 0.575594] NetLabel: Initializing
[ 0.576010] NetLabel: domain hash size = 128
[ 0.577009] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.578447] NetLabel: unlabeled traffic allowed by default
[ 0.580158] Switched to clocksource kvm-clock
[ 0.902603] pnp: PnP ACPI: disabled
[ 0.975164] NET: Registered protocol family 2
[ 1.004421] TCP established hash table entries: 4096 (order: 3, 32768
bytes)
[ 1.048847] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[ 1.090508] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.131774] TCP: reno registered
[ 1.152934] UDP hash table entries: 256 (order: 3, 49152 bytes)
[ 1.191682] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[ 1.234673] NET: Registered protocol family 1
[ 1.263534] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.302265] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.340404] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.382754] Unpacking initramfs...
[ 1.418595] Freeing initrd memory: 1644K (ffff88001f255000 -
ffff88001f3f0000)
[ 1.850647] DMA-API: preallocated 65536 debug entries
[ 1.882459] DMA-API: debugging enabled by
kernel config
[ 1.915462] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 1.965703] Scanning for low memory corruption every 60 seconds
[ 2.009128] futex hash table entries: 256 (order: 3, 32768 bytes)
[ 2.046660] Initialise system trusted keyring
[ 2.073801] audit: initializing netlink subsys (disabled)
[ 2.108215] audit: type=2000 audit(1391086366.512:1): initialized
[ 2.147940] cryptomgr_test (22) used greatest stack depth: 6064 bytes
left
[ 2.233170] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.447917] zbud: loaded
[ 2.492945] VFS: Disk quotas dquot_6.5.2
[ 2.534006] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.630740] msgmni has been set to 917
[ 2.670799] Key type big_key registered
[ 2.711529] cryptomgr_test (29) used greatest stack depth: 5568 bytes
left
[ 2.780489] cryptomgr_test (30) used greatest stack depth: 5456 bytes
left
[ 2.855684] alg: No test for stdrng (krng)
[ 2.897483] NET: Registered protocol family 38
[ 2.942895] Key type asymmetric registered
[ 2.985258] Asymmetric key parser 'x509' registered
[ 3.036583] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 3.113914] io scheduler noop registered
[ 3.154148] io scheduler deadline registered
[ 3.201794] io scheduler cfq registered (default)
[ 3.271552] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.328952] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.379990] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.806415] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
115200) is a 16550A
[ 3.866087] Non-volatile memory driver v1.3
[ 3.891731] Linux agpgart interface v0.103
[ 3.940806] scsi0 : ata_piix
[ 3.964614] scsi1 : ata_piix
[ 3.986166] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc060 irq 14
[ 4.033308] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc068 irq 15
[ 4.093497] libphy: Fixed MDIO Bus: probed
[ 4.123711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.169294] ehci-pci: EHCI PCI platform driver
[ 4.200497] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.252699] ohci-pci: OHCI PCI platform driver
[ 4.284003] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.330629] usbcore: registered new interface driver usbserial
[ 4.371607] usbcore: registered new interface driver usbserial_generic
[ 4.417311] usbserial: USB Serial support registered for generic
[ 4.459691] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.529412] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.564378] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.604447] mousedev: PS/2 mouse device common for all mice
[ 4.668687] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 4.862948] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 4.933103] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 4.991265] device-mapper: uevent: version 1.0.3
[ 5.021853] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30)
initialised: dm-devel(a)redhat.com
[ 5.101194] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.151753] usbcore: registered new interface driver usbhid
[ 5.200003] usbhid: USB HID core driver
[ 5.236106] drop_monitor: Initializing network drop monitor service
[ 5.292475] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.383915] TCP: cubic registered
[ 5.413656] Initializing XFRM netlink socket
[ 5.463432] NET: Registered protocol family 10
[ 5.498953] mip6: Mobile IPv6
[ 5.517005] NET: Registered protocol family 17
[ 5.551408] Loading compiled-in X.509 certificates
[ 5.581979] Loaded X.509 cert 'Fedora kernel signing key:
dd3bc3da7114e8641d00e979366e5d4789375e97'
[ 5.646980] registered taskstats version 1
[ 5.684460] Magic number: 14:833:886
[ 5.712426] rtc_cmos rtc_cmos: setting system clock to 2014-01-30
12:52:55 UTC (1391086375)
[ 5.796741] Freeing unused kernel memory: 3688K (ffffffff81d93000 -
ffffffff8212d000)
[ 5.857914] Write protecting the kernel read-only data: 12288k
[ 5.964875] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input2
[ 6.024409] Freeing unused kernel memory: 304K (ffff8800017b4000 -
ffff880001800000)
[ 6.073136] Freeing unused kernel memory: 804K (ffff880001b37000 -
ffff880001c00000)
supermin: mounting /proc
supermin: uptime: 6.13 0.06
supermin: ext2 mini initrd starting up: 4.1.5 zlib
supermin: cmdline: panic=1 console=ttyS0 udevtimeout=600 no_timer_check
acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0
guestfs_verbose=1 TERM=screen
supermin: mounting /sys
supermin: internal insmod megaraid_mm.ko
[ 6.296185] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03
EST 2006)
supermin: internal insmod megaraid_mbox.ko
[ 6.376830] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST
2006)
supermin: internal insmod megaraid_sas.ko
[ 6.471953] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
supermin: internal insmod megaraid.ko
supermin: internal insmod libcrc32c.ko
supermin: internal insmod crc32c-intel.ko
insmod: init_module: crc32c-intel.ko: No such device
supermin: internal insmod crc32-pclmul.ko
[ 6.720847] PCLMULQDQ-NI instructions are not detected.
insmod: init_module: crc32-pclmul.ko: No such device
supermin: internal insmod crct10dif-pclmul.ko
insmod: init_module: crct10dif-pclmul.ko: No such device
supermin: internal insmod crc-itu-t.ko
supermin: internal insmod crc32.ko
[ 6.970365] alg: No test for crc32 (crc32-table)
supermin: internal insmod crc-ccitt.ko
supermin: internal insmod crc8.ko
supermin: internal insmod scsi_transport_spi.ko
supermin: internal insmod sym53c8xx.ko
supermin: internal insmod ideapad_slidebar.ko
[ 7.213294] ideapad_slidebar: DMI does not match
insmod: init_module: ideapad_slidebar.ko: No such device
supermin: internal insmod rfkill.ko
supermin: internal insmod sparse-keymap.ko
supermin: internal insmod ideapad-laptop.ko
supermin: internal insmod virtio.ko
supermin: internal insmod virtio_ring.ko
supermin: internal insmod virtio_ring.ko
[475/1059]
supermin: internal insmod virtio-rng.ko
supermin: internal insmod virtio_console.ko
supermin: internal insmod virtio_blk.ko
supermin: internal insmod virtio_scsi.ko
supermin: internal insmod virtio_net.ko
supermin: internal insmod virtio_mmio.ko
supermin: internal insmod virtio_pci.ko
[ 7.800770] virtio-pci 0000:00:02.0: PCI->APIC IRQ transform: INT A
-> IRQ 34
[ 7.920641] scsi2 : Virtio SCSI HBA
[ 7.979552] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK
1.7. PQ: 0 ANSI: 5
[ 8.028903] virtio-pci 0000:00:03.0: PCI->APIC IRQ transform: INT A
-> IRQ 35
[ 8.291014] scsi 2:0:1:0: Direct-Access QEMU QEMU HARDDISK
1.7. PQ: 0 ANSI: 5
[ 9.230438] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 9.292898] sd 2:0:0:0: [sda] 204800 512-byte logical blocks: (104
MB/100 MiB)
[ 9.375684] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 9.434672] sd 2:0:1:0: [sdb] 8388608 512-byte logical blocks: (4.29
GB/4.00 GiB)
[ 9.523174] sd 2:0:1:0: [sdb] Write Protect is off
[ 9.571519] sd 2:0:0:0: [sda] Write Protect is off
[ 9.624403] sd 2:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.716420] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 9.878898] sdb: unknown partition table
[ 9.934558] sda: unknown partition table
[ 10.005688] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 10.063564] sd 2:0:0:0: [sda] Attached SCSI disk
supermin: internal insmod virtio_balloon.ko
supermin: picked /sys/block/sdb/dev as root device
supermin: creating /dev/root as block special 8:16
supermin: mounting new root on /root
[ 10.289492] EXT4-fs (sdb): mounting ext2 file system using the ext4
subsystem
[ 10.528512] EXT4-fs (sdb): mounted filesystem without journal. Opts:
supermin: chroot
[ 11.120538] random: nonblocking pool is initialized
Starting /init script ...
[ 12.145622] mkdir (55) used greatest stack depth: 3120 bytes left
[ 13.091400] systemd-udevd[65]: starting version 208
[ 14.301723] microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
[ 14.485635] ACPI Exception: AE_BAD_PARAMETER, Thread 433822384 could
not acquire Mutex [0x1] (20131218/utmutex-285)
[ 14.614592] piix4_smbus 0000:00:01.3: SMBus Host Controller at
0xb100, revision 0
[ 14.882860] microcode: Microcode Update Driver: v2.00
<tigran(a)aivazian.fsnet.co.uk>, Peter Oruba
[ 14.970000] input: PC Speaker as /devices/platform/pcspkr/input/input3
[/usr/lib/tmpfiles.d/systemd.conf:28] Failed to replace specifiers:
/var/log/journal/%m
[/usr/lib/tmpfiles.d/systemd.conf:30] Failed to replace specifiers:
/run/log/journal/%m
/init: line 69: /sys/block/hd*/queue/scheduler: No such file or directory
/init: line 69: /sys/block/ubd*/queue/scheduler: No such file or directory
/init: line 69: /sys/block/vd*/queue/scheduler: No such file or directory
Cannot find device "eth0"
Cannot find device "eth0"
RTNETLINK answers: Network is unreachable
mdadm: No arrays found in config file or automatically
Configuration setting "allocation/use_blkid_wiping" unknown.
Configuration setting
"allocation/wipe_signatures_when_zeroing_new_lvs" unknown.
Configuration setting "devices/ignore_lvm_mirrors" unknown.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
WARNING: Failed to connect to lvmetad: No such file or directory.
Falling back to internal scanning.
Reading all physical volumes. This may take a while...
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
No volume groups found
Configuration setting "allocation/use_blkid_wiping" unknown.
Configuration setting
"allocation/wipe_signatures_when_zeroing_new_lvs" unknown.
Configuration setting "devices/ignore_lvm_mirrors" unknown.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
WARNING: Failed to connect to lvmetad: No such file or directory.
Falling back to internal scanning.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
No volume groups found
[
]
Linux (none) 3.14.0-0.rc0.git12.1.fc21.x86_64 #1 SMP Mon Jan 27 20:02:51
UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
/dev:
total 0
crw------- 1 root root 10, 235 Jan 30 07:53 autofs
drwxr-xr-x 2 root root 80 Jan 30 07:53 block
drwxr-xr-x 2 root root 80 Jan 30 07:52 bsg
crw------- 1 root root 10, 234 Jan 30 07:53 btrfs-control
drwxr-xr-x 2 root root 2300 Jan 30 07:53 char
crw------- 1 root root 5, 1 Jan 30 07:53 console
lrwxrwxrwx 1 root root 11 Jan 30 07:53 core -> /proc/kcore
drwxr-xr-x 3 root root 80 Jan 30 07:53 cpu
crw------- 1 root root 10, 62 Jan 30 07:53 cpu_dma_latency
drwxr-xr-x 5 root root 100 Jan 30 07:53 disk
lrwxrwxrwx 1 root root 13 Jan 30 07:53 fd -> /proc/self/fd
crw-rw-rw- 1 root root 1, 7 Jan 30 07:53 full
crw------- 1 root root 10, 229 Jan 30 07:53 fuse
drwxr-xr-x 3 root root 160 Jan 30 07:53 input
crw-r--r-- 1 root root 1, 11 Jan 30 07:53 kmsg
crw------- 1 root root 10, 237 Jan 30 07:53 loop-control
drwxr-xr-x 2 root root 60 Jan 30 07:52 mapper
crw------- 1 root root 10, 227 Jan 30 07:53 mcelog
crw------- 1 root root 10, 59 Jan 30 07:53 megadev0
crw------- 1 root root 1, 1 Jan 30 07:53 mem
drwxr-xr-x 2 root root 60 Jan 30 07:53 net
crw------- 1 root root 10, 61 Jan 30 07:53 network_latency
crw------- 1 root root 10, 60 Jan 30 07:53 network_throughput
crw-rw-rw- 1 root root 1, 3 Jan 30 07:53 null
crw------- 1 root root 10, 144 Jan 30 07:53 nvram
crw------- 1 root root 1, 4 Jan 30 07:53 port
crw------- 1 root root 108, 0 Jan 30 07:53 ppp
crw-rw-rw- 1 root root 5, 2 Jan 30 07:53 ptmx
crw-rw-rw- 1 root root 1, 8 Jan 30 07:53 random
drwxr-xr-x 2 root root 60 Jan 30 07:52 raw
crw------- 1 root root 10, 58 Jan 30 07:53 rfkill
lrwxrwxrwx 1 root root 4 Jan 30 07:53 rtc -> rtc0
crw------- 1 root root 254, 0 Jan 30 07:53 rtc0
brw------- 1 root root 8, 0 Jan 30 07:53 sda
brw------- 1 root root 8, 16 Jan 30 07:53 sdb
crw------- 1 root root 21, 0 Jan 30 07:53 sg0
crw------- 1 root root 21, 1 Jan 30 07:53 sg1
crw------- 1 root root 10, 231 Jan 30 07:53 snapshot
drwxr-xr-x 3 root root 140 Jan 30 07:53 snd
lrwxrwxrwx 1 root root 15 Jan 30 07:53 stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 Jan 30 07:53 stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 Jan 30 07:53 stdout -> /proc/self/fd/1
crw-rw-rw- 1 root root 5, 0 Jan 30 07:53 tty
crw------- 1 root root 4, 0 Jan 30 07:53 tty0
crw------- 1 root root 4, 1 Jan 30 07:53 tty1
crw------- 1 root root 4, 10 Jan 30 07:53 tty10
crw------- 1 root root 4, 11 Jan 30 07:53 tty11
crw------- 1 root root 4, 12 Jan 30 07:53 tty12
crw------- 1 root root 4, 13 Jan 30 07:53 tty13
crw------- 1 root root 4, 14 Jan 30 07:53 tty14
crw------- 1 root root 4, 15 Jan 30 07:53 tty15
crw------- 1 root root 4, 16 Jan 30 07:53 tty16
crw------- 1 root root 4, 17 Jan 30 07:53 tty17
crw------- 1 root root 4, 18 Jan 30 07:53 tty18
crw------- 1 root root 4, 19 Jan 30 07:53 tty19
crw------- 1 root root 4, 2 Jan 30 07:53 tty2
crw------- 1 root root 4, 20 Jan 30 07:53 tty20
crw------- 1 root root 4, 21 Jan 30 07:53 tty21
crw------- 1 root root 4, 22 Jan 30 07:53 tty22
crw------- 1 root root 4, 23 Jan 30 07:53 tty23
crw------- 1 root root 4, 24 Jan 30 07:53 tty24
crw------- 1 root root 4, 25 Jan 30 07:53 tty25
crw------- 1 root root 4, 26 Jan 30 07:53 tty26
crw------- 1 root root 4, 27 Jan 30 07:53 tty27
crw------- 1 root root 4, 28 Jan 30 07:53 tty28
crw------- 1 root root 4, 29 Jan 30 07:53 tty29
crw------- 1 root root 4, 3 Jan 30 07:53 tty3
crw------- 1 root root 4, 30 Jan 30 07:53 tty30
crw------- 1 root root 4, 31 Jan 30 07:53 tty31
crw------- 1 root root 4, 32 Jan 30 07:53 tty32
crw------- 1 root root 4, 33 Jan 30 07:53 tty33
crw------- 1 root root 4, 34 Jan 30 07:53 tty34
crw------- 1 root root 4, 35 Jan 30 07:53 tty35
crw------- 1 root root 4, 36 Jan 30 07:53 tty36
crw------- 1 root root 4, 37 Jan 30 07:53 tty37
crw------- 1 root root 4, 38 Jan 30 07:53 tty38
crw------- 1 root root 4, 39 Jan 30 07:53 tty39
crw------- 1 root root 4, 4 Jan 30 07:53 tty4
crw------- 1 root root 4, 40 Jan 30 07:53 tty40
crw------- 1 root root 4, 41 Jan 30 07:53 tty41
crw------- 1 root root 4, 42 Jan 30 07:53 tty42
crw------- 1 root root 4, 43 Jan 30 07:53 tty43
crw------- 1 root root 4, 44 Jan 30 07:53 tty44
crw------- 1 root root 4, 45 Jan 30 07:53 tty45
crw------- 1 root root 4, 46 Jan 30 07:53 tty46
crw------- 1 root root 4, 47 Jan 30 07:53 tty47
crw------- 1 root root 4, 48 Jan 30 07:53 tty48
crw------- 1 root root 4, 49 Jan 30 07:53 tty49
crw------- 1 root root 4, 5 Jan 30 07:53 tty5
crw------- 1 root root 4, 50 Jan 30 07:53 tty50
crw------- 1 root root 4, 51 Jan 30 07:53 tty51
crw------- 1 root root 4, 52 Jan 30 07:53 tty52
crw------- 1 root root 4, 53 Jan 30 07:53 tty53
crw------- 1 root root 4, 54 Jan 30 07:53 tty54
crw------- 1 root root 4, 55 Jan 30 07:53 tty55
crw------- 1 root root 4, 56 Jan 30 07:53 tty56
crw------- 1 root root 4, 57 Jan 30 07:53 tty57
crw------- 1 root root 4, 58 Jan 30 07:53 tty58
crw------- 1 root root 4, 59 Jan 30 07:53 tty59
crw------- 1 root root 4, 6 Jan 30 07:53 tty6
crw------- 1 root root 4, 60 Jan 30 07:53 tty60
crw------- 1 root root 4, 61 Jan 30 07:53 tty61
crw------- 1 root root 4, 62 Jan 30 07:53 tty62
crw------- 1 root root 4, 63 Jan 30 07:53 tty63
crw------- 1 root root 4, 7 Jan 30 07:53 tty7
crw------- 1 root root 4, 8 Jan 30 07:53 tty8
crw------- 1 root root 4, 9 Jan 30 07:53 tty9
crw------- 1 root root 4, 64 Jan 30 07:53 ttyS0
crw------- 1 root root 4, 65 Jan 30 07:53 ttyS1
crw------- 1 root root 4, 66 Jan 30 07:53 ttyS2
crw------- 1 root root 4, 67 Jan 30 07:53 ttyS3
crw------- 1 root root 10, 239 Jan 30 07:53 uhid
crw------- 1 root root 10, 223 Jan 30 07:53 uinput
crw-rw-rw- 1 root root 1, 9 Jan 30 07:53 urandom
crw------- 1 root root 251, 0 Jan 30 07:53 usbmon0
crw------- 1 root root 7, 0 Jan 30 07:53 vcs
crw------- 1 root root 7, 1 Jan 30 07:53 vcs1
crw------- 1 root root 7, 128 Jan 30 07:53 vcsa
crw------- 1 root root 7, 129 Jan 30 07:53 vcsa1
drwxr-xr-x 2 root root 60 Jan 30 07:53 vfio
crw------- 1 root root 10, 63 Jan 30 07:53 vga_arbiter
crw------- 1 root root 10, 238 Jan 30 07:53 vhost-net
drwxr-xr-x 2 root root 60 Jan 30 07:53 virtio-ports
crw------- 1 root root 247, 1 Jan 30 07:53 vport1p1
crw-rw-rw- 1 root root 1, 5 Jan 30 07:53 zero
/dev/block:
total 0
lrwxrwxrwx 1 root root 6 Jan 30 07:53 8:0 -> ../sda
lrwxrwxrwx 1 root root 6 Jan 30 07:53 8:16 -> ../sdb
/dev/bsg:
total 0
crw------- 1 root root 252, 0 Jan 30 07:53 2:0:0:0
crw------- 1 root root 252, 1 Jan 30 07:53 2:0:1:0
/dev/char:
total 0
lrwxrwxrwx 1 root root 8 Jan 30 07:53 10:144 -> ../nvram
lrwxrwxrwx 1 root root 16 Jan 30 07:53 10:184 -> ../cpu/microcode
lrwxrwxrwx 1 root root 9 Jan 30 07:53 10:227 -> ../mcelog
lrwxrwxrwx 1 root root 11 Jan 30 07:53 10:231 -> ../snapshot
lrwxrwxrwx 1 root root 9 Jan 30 07:53 10:235 -> ../autofs
lrwxrwxrwx 1 root root 17 Jan 30 07:53 10:236 -> ../mapper/control
lrwxrwxrwx 1 root root 9 Jan 30 07:53 10:58 -> ../rfkill
lrwxrwxrwx 1 root root 11 Jan 30 07:53 10:59 -> ../megadev0
lrwxrwxrwx 1 root root 21 Jan 30 07:53 10:60 -> ../network_throughput
lrwxrwxrwx 1 root root 18 Jan 30 07:53 10:61 -> ../network_latency
lrwxrwxrwx 1 root root 18 Jan 30 07:53 10:62 -> ../cpu_dma_latency
lrwxrwxrwx 1 root root 14 Jan 30 07:53 10:63 -> ../vga_arbiter
lrwxrwxrwx 1 root root 15 Jan 30 07:53 116:2 -> ../snd/pcmC0D0p
lrwxrwxrwx 1 root root 16 Jan 30 07:53 116:3 -> ../snd/controlC0
lrwxrwxrwx 1 root root 12 Jan 30 07:53 116:33 -> ../snd/timer
lrwxrwxrwx 1 root root 15 Jan 30 07:53 13:32 -> ../input/mouse0
lrwxrwxrwx 1 root root 13 Jan 30 07:53 13:63 -> ../input/mice
lrwxrwxrwx 1 root root 15 Jan 30 07:53 13:64 -> ../input/event0
lrwxrwxrwx 1 root root 15 Jan 30 07:53 13:65 -> ../input/event1
lrwxrwxrwx 1 root root 15 Jan 30 07:53 13:66 -> ../input/event2
lrwxrwxrwx 1 root root 13 Jan 30 07:53 162:0 -> ../raw/rawctl
lrwxrwxrwx 1 root root 6 Jan 30 07:53 1:1 -> ../mem
lrwxrwxrwx 1 root root 7 Jan 30 07:53 1:11 -> ../kmsg
lrwxrwxrwx 1 root root 7 Jan 30 07:53 1:3 -> ../null
lrwxrwxrwx 1 root root 7 Jan 30 07:53 1:4 -> ../port
lrwxrwxrwx 1 root root 7 Jan 30 07:53 1:5 -> ../zero
lrwxrwxrwx 1 root root 7 Jan 30 07:53 1:7 -> ../full
lrwxrwxrwx 1 root root 9 Jan 30 07:53 1:8 -> ../random
lrwxrwxrwx 1 root root 10 Jan 30 07:53 1:9 -> ../urandom
lrwxrwxrwx 1 root root 12 Jan 30 07:53 202:0 -> ../cpu/0/msr
lrwxrwxrwx 1 root root 14 Jan 30 07:53 203:0 -> ../cpu/0/cpuid
lrwxrwxrwx 1 root root 6 Jan 30 07:53 21:0 -> ../sg0
lrwxrwxrwx 1 root root 6 Jan 30 07:53 21:1 -> ../sg1
lrwxrwxrwx 1 root root 11 Jan 30 07:53 247:1 -> ../vport1p1
lrwxrwxrwx 1 root root 10 Jan 30 07:53 251:0 -> ../usbmon0
lrwxrwxrwx 1 root root 14 Jan 30 07:53 252:0 -> ../bsg/2:0:0:0
lrwxrwxrwx 1 root root 14 Jan 30 07:53 252:1 -> ../bsg/2:0:1:0
rwxrwxrwx 1 root root 7 Jan 30 07:53 254:0 -> ../rtc0
[228/1059]
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:0 -> ../tty0
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:1 -> ../tty1
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:10 -> ../tty10
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:11 -> ../tty11
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:12 -> ../tty12
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:13 -> ../tty13
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:14 -> ../tty14
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:15 -> ../tty15
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:16 -> ../tty16
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:17 -> ../tty17
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:18 -> ../tty18
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:19 -> ../tty19
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:2 -> ../tty2
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:20 -> ../tty20
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:21 -> ../tty21
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:22 -> ../tty22
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:23 -> ../tty23
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:24 -> ../tty24
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:25 -> ../tty25
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:26 -> ../tty26
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:27 -> ../tty27
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:28 -> ../tty28
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:29 -> ../tty29
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:3 -> ../tty3
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:30 -> ../tty30
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:31 -> ../tty31
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:32 -> ../tty32
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:33 -> ../tty33
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:34 -> ../tty34
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:35 -> ../tty35
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:36 -> ../tty36
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:37 -> ../tty37
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:38 -> ../tty38
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:39 -> ../tty39
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:4 -> ../tty4
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:40 -> ../tty40
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:41 -> ../tty41
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:42 -> ../tty42
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:43 -> ../tty43
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:44 -> ../tty44
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:45 -> ../tty45
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:46 -> ../tty46
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:47 -> ../tty47
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:48 -> ../tty48
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:49 -> ../tty49
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:5 -> ../tty5
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:50 -> ../tty50
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:51 -> ../tty51
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:52 -> ../tty52
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:53 -> ../tty53
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:54 -> ../tty54
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:55 -> ../tty55
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:56 -> ../tty56
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:57 -> ../tty57
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:58 -> ../tty58
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:59 -> ../tty59
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:6 -> ../tty6
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:60 -> ../tty60
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:61 -> ../tty61
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:62 -> ../tty62
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:63 -> ../tty63
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:64 -> ../ttyS0
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:65 -> ../ttyS1
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:66 -> ../ttyS2
lrwxrwxrwx 1 root root 8 Jan 30 07:53 4:67 -> ../ttyS3
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:7 -> ../tty7
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:8 -> ../tty8
lrwxrwxrwx 1 root root 7 Jan 30 07:53 4:9 -> ../tty9
lrwxrwxrwx 1 root root 6 Jan 30 07:53 5:0 -> ../tty
lrwxrwxrwx 1 root root 10 Jan 30 07:53 5:1 -> ../console
lrwxrwxrwx 1 root root 7 Jan 30 07:53 5:2 -> ../ptmx
lrwxrwxrwx 1 root root 6 Jan 30 07:53 7:0 -> ../vcs
lrwxrwxrwx 1 root root 7 Jan 30 07:53 7:1 -> ../vcs1
lrwxrwxrwx 1 root root 7 Jan 30 07:53 7:128 -> ../vcsa
lrwxrwxrwx 1 root root 8 Jan 30 07:53 7:129 -> ../vcsa1
/dev/cpu:
total 0
drwxr-xr-x 2 root root 80 Jan 30 07:52 0
crw------- 1 root root 10, 184 Jan 30 07:53 microcode
/dev/cpu/0:
total 0
crw------- 1 root root 203, 0 Jan 30 07:53 cpuid
crw------- 1 root root 202, 0 Jan 30 07:53 msr
/dev/disk:
total 0
drwxr-xr-x 2 root root 80 Jan 30 07:53 by-id
drwxr-xr-x 2 root root 80 Jan 30 07:53 by-path
drwxr-xr-x 2 root root 60 Jan 30 07:53 by-uuid
/dev/disk/by-id:
total 0
lrwxrwxrwx 1 root root 9 Jan 30 07:53 scsi-0QEMU_QEMU_HARDDISK_appliance
-> ../../sdb
lrwxrwxrwx 1 root root 9 Jan 30 07:53 scsi-0QEMU_QEMU_HARDDISK_hd0 ->
../../sda
/dev/disk/by-path:
total 0
lrwxrwxrwx 1 root root 9 Jan 30 07:53
pci-0000:00:02.0-virtio-pci-virtio0-scsi-0:0:0:0 -> ../../sda
lrwxrwxrwx 1 root root 9 Jan 30 07:53
pci-0000:00:02.0-virtio-pci-virtio0-scsi-0:0:1:0 -> ../../sdb
/dev/disk/by-uuid:
total 0
lrwxrwxrwx 1 root root 9 Jan 30 07:53
1a3b8f7c-4b38-4aff-a871-3bb09d7bd3b9 -> ../../sdb
/dev/input:
total 0
drwxr-xr-x 2 root root 120 Jan 30 07:53 by-path
crw------- 1 root root 13, 64 Jan 30 07:53 event0
crw------- 1 root root 13, 65 Jan 30 07:53 event1
crw------- 1 root root 13, 66 Jan 30 07:53 event2
crw------- 1 root root 13, 63 Jan 30 07:53 mice
crw------- 1 root root 13, 32 Jan 30 07:53 mouse0
/dev/input/by-path:
total 0
lrwxrwxrwx 1 root root 9 Jan 30 07:53 platform-i8042-serio-0-event-kbd
-> ../event0
lrwxrwxrwx 1 root root 9 Jan 30 07:53 platform-i8042-serio-1-event-mouse
-> ../event1
lrwxrwxrwx 1 root root 9 Jan 30 07:53 platform-i8042-serio-1-mouse ->
../mouse0
lrwxrwxrwx 1 root root 9 Jan 30 07:53 platform-pcspkr-event-spkr ->
../event2
/dev/mapper:
total 0
crw------- 1 root root 10, 236 Jan 30 07:53 control
/dev/net:
total 0
crw------- 1 root root 10, 200 Jan 30 07:53 tun
/dev/raw:
total 0
crw------- 1 root root 162, 0 Jan 30 07:53 rawctl
/dev/snd:
total 0
drwxr-xr-x 2 root root 60 Jan 30 07:53 by-path
crw-rw---- 1 root audio 116, 3 Jan 30 07:53 controlC0
crw-rw---- 1 root audio 116, 2 Jan 30 07:53 pcmC0D0p
crw------- 1 root root 116, 1 Jan 30 07:53 seq
crw------- 1 root audio 116, 33 Jan 30 07:53 timer
/dev/snd/by-path:
total 0
lrwxrwxrwx 1 root root 12 Jan 30 07:53 platform-pcspkr -> ../controlC0
/dev/vfio:
total 0
crw------- 1 root root 10, 196 Jan 30 07:53 vfio
/dev/virtio-ports:
total 0
lrwxrwxrwx 1 root root 11 Jan 30 07:53 org.libguestfs.channel.0 ->
../vport1p1
rootfs / rootfs rw 0 0
proc /proc proc rw,relatime 0 0
/dev/root / ext2 rw,noatime 0 0
/proc /proc proc rw,relatime 0 0
/sys /sys sysfs rw,relatime 0 0
tmpfs /run tmpfs rw,nosuid,relatime,size=94864k,mode=755 0 0
/dev /dev devtmpfs rw,relatime,size=233936k,nr_inodes=58484,mode=755 0 0
Configuration setting "allocation/use_blkid_wiping" unknown.
Configuration setting
"allocation/wipe_signatures_when_zeroing_new_lvs" unknown.
Configuration setting "devices/ignore_lvm_mirrors" unknown.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
WARNING: Failed to connect to lvmetad: No such file or directory.
Falling back to internal scanning.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
Configuration setting "allocation/use_blkid_wiping" unknown.
Configuration setting
"allocation/wipe_signatures_when_zeroing_new_lvs" unknown.
Configuration setting "devices/ignore_lvm_mirrors" unknown.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
WARNING: Failed to connect to lvmetad: No such file or directory.
Falling back to internal scanning.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
No volume groups found
Configuration setting "allocation/use_blkid_wiping" unknown.
Configuration setting
"allocation/wipe_signatures_when_zeroing_new_lvs" unknown.
Configuration setting "devices/ignore_lvm_mirrors" unknown.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
WARNING: Failed to connect to lvmetad: No such file or directory.
Falling back to internal scanning.
/run/lvm/lvmetad.socket: connect failed: No such file or directory
/run/lvm/lvmetad.socket: connect failed: No such file or directory
No volume groups found
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
Module Size Used by
snd_pcsp 18835 0
snd_pcm 99406 1 snd_pcsp
snd_timer 28806 1 snd_pcm
snd 79565 3 snd_timer,snd_pcm,snd_pcsp
i2c_piix4 22155 0
soundcore 14491 1 snd
i2c_core 38554 1 i2c_piix4
ata_generic 12910 0
microcode 216608 0
serio_raw 13413 0
pata_acpi 13038 0
virtio_balloon 13530 0
virtio_pci 17713 0
virtio_mmio 13193 0
virtio_net 28415 0
virtio_scsi 18515 1
virtio_blk 18080 0
virtio_console 28110 0
virtio_rng 13135 0
virtio_ring 20004 8
virtio_blk,virtio_net,virtio_pci,virtio_rng,virtio_balloon,virtio_console,virtio_mmio,virtio_scsi
virtio 14172 8
virtio_blk,virtio_net,virtio_pci,virtio_rng,virtio_balloon,virtio_console,virtio_mmio,virtio_scsi
ideapad_laptop 18216 0
sparse_keymap 13584 1 ideapad_laptop
rfkill 22195 1 ideapad_laptop
sym53c8xx 80734 0
scsi_transport_spi 30274 1 sym53c8xx
crc8 12750 0
crc_ccitt 12613 0
crc32 12714 0
crc_itu_t 12613 0
libcrc32c 12603 0
megaraid 48287 0
megaraid_sas 99663 0
megaraid_mbox 40368 0
megaraid_mm 18221 1 megaraid_mbox
Thu Jan 30 07:53:21 EST 2014
clocksource: kvm-clock
uptime: 31.93 0.09
verbose daemon enabled
linux commmand line: panic=1 console=ttyS0 udevtimeout=600
no_timer_check acpi=off printk.time=1 cgroup_disable=memory
root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=screen
trying to open virtio-serial channel
'/dev/virtio-ports/org.libguestfs.channel.0'
udevadm settle
libguestfs: recv_from_daemon: received GUESTFS_LAUNCH_FLAG
libguestfs: [264424ms] appliance is up
Guest launched OK.
guestfsd: main_loop: new request, len 0x3c
udevadm settle
parted -s -- /dev/sda mklabel msdos mkpart primary 128s -128s
Warning: The resulting partition is not properly aligned for best
performance.
udevadm settle
guestfsd: main_loop: proc 210 (part_disk) took 1.94 seconds
guestfsd: main_loop: new request, len 0x50
wipefs --help
wipefs -a --force /dev/sda1
mke2fs -t ext2 -F /dev/sda1
mke2fs 1.42.8 (20-Jun-2013)
guestfsd: main_loop: proc 278 (mkfs) took 1.81 seconds
guestfsd: main_loop: new request, len 0x40
mount -o /dev/sda1 /sysroot/
[ 37.766446] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 37.926018] EXT4-fs (sda1): mounted filesystem without journal. Opts:
(null)
guestfsd: main_loop: proc 1 (mount) took 0.90 seconds
guestfsd: main_loop: new request, len 0x34
guestfsd: main_loop: proc 3 (touch) took 0.06 seconds
guestfsd: main_loop: new request, len 0x28
umount /sysroot
fsync /dev/sda
libguestfs: sending SIGTERM to process 48146
----------------
--
/kashyap
10 years, 9 months
- 2
- 1