3:01 p.m.
Hello,
I am trying to make a .iso to p2v some old windows servers, and I
installed a brand new FC22 server to build my images
I run
virt-p2v-make-kickstart fedora
livecd-creator p2v.ks
and I get the following error:
Installing: grubby ##################### [435/436]
Installing: uboot-tools ##################### [436/436]
Installing: b43-fwcutter ##################### [437/436]
947 blocks
No '/dev/log' or 'logger' included for syslog logging
dracut module 'dmsquash-live' depends on 'img-lib', which can't be
installed
dracut module 'dmsquash-live' cannot be found or installed.
mkinitrd failed
warning: %posttrans(kernel-core-4.0.4-301.fc22.i686) scriptlet failed,
exit status 1
getsebool: SELinux is disabled
success
The .iso builds however the boot menu just returns to itself and I never
get to the p2v menu. What am I doing incorrectly to build the ISO?
Thanks ,
Marty
3:20 p.m.
On Mon, Aug 10, 2015 at 04:01:40PM -0400, Martin Breault wrote:
Hello,
I am trying to make a .iso to p2v some old windows servers, and I
installed a brand new FC22 server to build my images
I run
virt-p2v-make-kickstart fedora
livecd-creator p2v.ks
and I get the following error:
Installing: grubby ##################### [435/436]
Installing: uboot-tools ##################### [436/436]
Installing: b43-fwcutter ##################### [437/436]
947 blocks
No '/dev/log' or 'logger' included for syslog logging
dracut module 'dmsquash-live' depends on 'img-lib', which can't be
installed
dracut module 'dmsquash-live' cannot be found or installed.
mkinitrd failed
warning: %posttrans(kernel-core-4.0.4-301.fc22.i686) scriptlet
failed, exit status 1
getsebool: SELinux is disabled
success
The .iso builds however the boot menu just returns to itself and I
never get to the p2v menu. What am I doing incorrectly to build the
ISO?
Yup, livecd-tools is broken junk.
I'm building ISOs you can download here:
http://oirase.annexia.org/virt-p2v
The RHEL-7.2-preview/ directory contains the latest version, and
should work fine with virt-v2v from Fedora. These are built in a RHEL 7
VM, using the EPEL 7 version of livecd-tools which seems to work more
reliably.
I would caution you that you should always run livecd-tools in a
disposable VM, since it requires root and does all sorts of weird
stuff with host devices.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-top is 'top' for virtual machines. Tiny program with many
powerful monitoring features, net stats, disk stats, logging, etc.
http://people.redhat.com/~rjones/virt-top
3:23 p.m.
On 8/10/2015 4:20 PM, Richard W.M. Jones wrote:
On Mon, Aug 10, 2015 at 04:01:40PM -0400, Martin Breault wrote:
Yup, livecd-tools is broken junk. I'm building ISOs you can download
here: http://oirase.annexia.org/virt-p2v The RHEL-7.2-preview/
directory contains the latest version, and should work fine with
virt-v2v from Fedora. These are built in a RHEL 7 VM, using the EPEL 7
version of livecd-tools which seems to work more reliably. I would
caution you that you should always run livecd-tools in a disposable
VM, since it requires root and does all sorts of weird stuff with host
devices. Rich.
Hum. Yes I am using a disposable VM for this.
My issue with the .isos I have been able to find available for download
is that they seem to assume that hardware is 64-bit compatible, and a
few of my servers sadly are still using 32-bit hardware. I am trying to
boot them and thus why I need to make my own livecd.
Are there 32-bit compatible images available?
Thanks,
Marty
4:47 p.m.
On Mon, Aug 10, 2015 at 04:23:24PM -0400, Martin Breault wrote:
On 8/10/2015 4:20 PM, Richard W.M. Jones wrote:
>On Mon, Aug 10, 2015 at 04:01:40PM -0400, Martin Breault wrote:
>Yup, livecd-tools is broken junk. I'm building ISOs you can
>download here: http://oirase.annexia.org/virt-p2v The
>RHEL-7.2-preview/ directory contains the latest version, and
>should work fine with virt-v2v from Fedora. These are built in a
>RHEL 7 VM, using the EPEL 7 version of livecd-tools which seems to
>work more reliably. I would caution you that you should always run
>livecd-tools in a disposable VM, since it requires root and does
>all sorts of weird stuff with host devices. Rich.
Hum. Yes I am using a disposable VM for this.
My issue with the .isos I have been able to find available for
download is that they seem to assume that hardware is 64-bit
compatible, and a few of my servers sadly are still using 32-bit
hardware. I am trying to boot them and thus why I need to make my
own livecd.
Are there 32-bit compatible images available?
I'm not distributing any, although I see no reason why it wouldn't
be possible to build them.
I was trying to use 'livemedia-creator' to build a live CD to see if
that would work. It's still running (for about the last 2 hours in
fact). If it works by tomorrow morning I'll give this list an update.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
2:49 a.m.
On Mon, Aug 10, 2015 at 10:47:22PM +0100, Richard W.M. Jones wrote:
I was trying to use 'livemedia-creator' to build a live CD to
see if
that would work. It's still running (for about the last 2 hours in
fact). If it works by tomorrow morning I'll give this list an update.
The upshot is it seemed to just get stuck in the virt-install phase
overnight (so at least, say, 10 hours). Since livemedia-creator hides
the output from virt-install it's hard to know what's going on.
I conclude that livemedia-creator is junk like livecd-creator.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
4:43 a.m.
On Mon, Aug 10, 2015 at 04:23:24PM -0400, Martin Breault wrote:
Are there 32-bit compatible images available?
I meant to ask you about this. Do you need this because the hardware
is 32 bit only? If the hardware is x86-64 then you can use the 64 bit
virt-p2v ISO fine, even though the OS is 32 bit.
The reason we don't build 32 bit virt-p2v ISOs any more is because
since RHEL 7 we dropped support for x86:
https://access.redhat.com/articles/rhel-limits
Building a RHEL 6-based modern virt-p2v is possible, but would require
some non-trivial effort, particularly around testing and certification.
It should be possible to build a Fedora-based 32 bit ISO, modulo the
other bugs in livecd-creator etc.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
5:51 a.m.
On 8/11/2015 5:43 AM, Richard W.M. Jones wrote:
On Mon, Aug 10, 2015 at 04:23:24PM -0400, Martin Breault wrote:
> Are there 32-bit compatible images available?
I meant to ask you about this. Do you need this because the hardware
is 32 bit only? If the hardware is x86-64 then you can use the 64 bit
virt-p2v ISO fine, even though the OS is 32 bit.
The reason we don't build 32 bit virt-p2v ISOs any more is because
since RHEL 7 we dropped support for x86:
https://access.redhat.com/articles/rhel-limits
Building a RHEL 6-based modern virt-p2v is possible, but would require
some non-trivial effort, particularly around testing and certification.
It should be possible to build a Fedora-based 32 bit ISO, modulo the
other bugs in livecd-creator etc.
Rich.
Hello,
Yes sadly the hardware is 32-bit only, and running Win2003 to boot.
I tried doing a P2V using Centos6 ISO + Centos6 P2V server and although
all things seemed to export correctly without errors to the export
domain of my oVirt, the resulting VM (that has virtio as the disk
driver) gives doesn't boot either with VirtIO or IDE as a disk driver,
throwing an error about the boot device. This is why I was hoping with
a newer FC-22 iso and conversion server I would have better luck.
I know Windows2003 is supposed to be supported. I guess I will
re-install with Centos6 and figure out if I can run a plain exported
.raw image on a standalone KVM before I re-attempt at oVirt.
What commandline were you using with livemedia-creator? I think there
is a way to send --vnc as a parameter to watch via a vnc viewer what is
going on.
Your help is appreciated!
Martin
10:02 a.m.
I finally worked out what's going on with livecd-creator. It's
this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1182362
and the workaround is trivial: just add 'tar' to the list of
packages in the kickstart. I will add this to the p2v.ks upstream
shortly.
I'm also building a 32 bit ISO based on Fedora 22 which will
go on the website later today (if it works).
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
12:21 a.m.
On 8/11/2015 11:02 AM, Richard W.M. Jones wrote:
I finally worked out what's going on with livecd-creator.
It's
this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1182362
and the workaround is trivial: just add 'tar' to the list of
packages in the kickstart. I will add this to the p2v.ks upstream
shortly.
I'm also building a 32 bit ISO based on Fedora 22 which will
go on the website later today (if it works).
Rich.
Hello,
Thanks for that awesome info, I modified p2v.ks and added "tar" as one
of the packages and it did in fact build on a Fc22 32-bit OS! I used
livecd-creator p2v.ks and it built.
Strangely (very strangely....) when I burn the resulting .iso (383MB) as
a CD it fails to boot, complaining about blk_update_request errors and
hangs. At first I thought it was my CD-RW, however I tried on a
standard CD-R and it throws the same error at the same sector, on this
antiquated 32-bit hardware or on newer hardware as well. I tried 2
different burn hosts with identical sector error results.
But, if I burn it as a DVD, it boots perfectly. If I boot it as a VM
.iso startup disk, it boots perfectly. I wrote it to a USB pen drive
using a windows utility called "rufus" and create a bootable USB disk,
it works too. very strange. But the important thing is that I have a
32-bit ISO I can use in one of these forms, worst case I will install a
DVD drive in the antiques I need to salvage. Not sure why as a CD it
won't boot and the identical .iso burned to a DVD works.
Anyway, thanks alot for your help, I am on the way to getting this working.
Cheers,
Marty
3314
days inactive
3316
days old
8 comments
2 participants
participants (2)
-
Martin Breault -
Richard W.M. Jones