5:35 p.m.
I was a little surprised to find that LIBNBD_TLS_ALLOW worked out of
the box, so I had to examine the logs whereupon I saw the magic
message ...
libnbd: debug: nbd1: nbd_connect_command: server refused TLS (policy), continuing with
unencrypted connection
I don't believe this path has ever been tested before.
It's possible the tests could be improved if they actually checked for
this message, but the patches as posted try to use regular APIs.
Rich.
5:35 p.m.
New subject: [PATCH libnbd 1/5] interop: Don't build various check_PROGRAMS unless we run those tests.
Simple refactoring with no effect.
---
interop/Makefile.am | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/interop/Makefile.am b/interop/Makefile.am
index 1d2d187..7bb44d9 100644
--- a/interop/Makefile.am
+++ b/interop/Makefile.am
@@ -47,8 +47,6 @@ if HAVE_QEMU_NBD
check_PROGRAMS += \
interop-qemu-nbd \
- interop-qemu-nbd-tls-certs \
- interop-qemu-nbd-tls-psk \
dirty-bitmap \
structured-read \
$(NULL)
@@ -64,11 +62,17 @@ TESTS += \
if HAVE_NBDKIT
if HAVE_GNUTLS
if HAVE_CERTTOOL
+check_PROGRAMS += \
+ interop-qemu-nbd-tls-certs \
+ $(NULL)
TESTS += \
interop-qemu-nbd-tls-certs \
$(NULL)
endif
if HAVE_PSKTOOL
+check_PROGRAMS += \
+ interop-qemu-nbd-tls-psk \
+ $(NULL)
TESTS += \
interop-qemu-nbd-tls-psk \
$(NULL)
--
2.23.0
5:35 p.m.
New subject: [PATCH libnbd 2/5] interop: Allow -DEXPORT_NAME to be defined optionally.
Neutral refactoring.
---
interop/interop.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/interop/interop.c b/interop/interop.c
index a3ab39b..0b7b1a5 100644
--- a/interop/interop.c
+++ b/interop/interop.c
@@ -66,10 +66,12 @@ main (int argc, char *argv[])
goto out;
}
+#ifdef EXPORT_NAME
if (nbd_set_export_name (nbd, EXPORT_NAME) == -1) {
fprintf (stderr, "%s\n", nbd_get_error ());
goto out;
}
+#endif
#if CERTS || PSK
/* Require TLS on the handle and fail if not available or if the
--
2.23.0
5:35 p.m.
New subject: [PATCH libnbd 3/5] interop: Add interop tests for nbdkit.
Although the main test suite already depends on nbdkit rather heavily
and therefore it's pretty well tested, add a separate set of interop
tests. The purpose will become clear in a subsequent commit.
---
.gitignore | 3 +++
README | 4 +--
interop/Makefile.am | 60 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/.gitignore b/.gitignore
index 53aa206..ab47370 100644
--- a/.gitignore
+++ b/.gitignore
@@ -60,6 +60,9 @@ Makefile.in
/html/*.?.html
/include/libnbd.h
/interop/dirty-bitmap
+/interop/interop-nbdkit
+/interop/interop-nbdkit-tls-certs
+/interop/interop-nbdkit-tls-psk
/interop/interop-nbd-server
/interop/interop-qemu-nbd
/interop/interop-qemu-nbd-tls-certs
diff --git a/README b/README
index d6d1704..1c9d816 100644
--- a/README
+++ b/README
@@ -87,8 +87,8 @@ Optional, only needed to run the test suite:
* nbdkit >= 1.12, the nbdkit basic plugins and the nbdkit basic
filters are recommended as they are needed to run the test suite.
- * nbd-server and qemu-nbd if you want to do interoperability testing
- against these servers.
+ * nbdkit, nbd-server and qemu-nbd if you want to do interoperability
+ testing against these servers.
* A C++ compiler is needed if you want to test that the library works
from C++.
diff --git a/interop/Makefile.am b/interop/Makefile.am
index 7bb44d9..9cb8071 100644
--- a/interop/Makefile.am
+++ b/interop/Makefile.am
@@ -129,5 +129,65 @@ structured_read_LDADD = $(top_builddir)/lib/libnbd.la
endif HAVE_QEMU_NBD
+if HAVE_NBDKIT
+
+check_PROGRAMS += \
+ interop-nbdkit \
+ $(NULL)
+TESTS += \
+ interop-nbdkit \
+ $(NULL)
+
+# See above comment about files in ../tests/Makefile.am
+if HAVE_GNUTLS
+if HAVE_CERTTOOL
+check_PROGRAMS += \
+ interop-nbdkit-tls-certs \
+ $(NULL)
+TESTS += \
+ interop-nbdkit-tls-certs \
+ $(NULL)
+endif
+if HAVE_PSKTOOL
+check_PROGRAMS += \
+ interop-nbdkit-tls-psk \
+ $(NULL)
+TESTS += \
+ interop-nbdkit-tls-psk \
+ $(NULL)
+endif
+endif
+
+interop_nbdkit_SOURCES = interop.c
+interop_nbdkit_CPPFLAGS = \
+ -I$(top_srcdir)/include \
+ -DSERVER=\"$(NBDKIT)\" \
+ -DSERVER_PARAMS='"-s", "--exit-with-parent", "file",
tmpfile' \
+ $(NULL)
+interop_nbdkit_CFLAGS = $(WARNINGS_CFLAGS)
+interop_nbdkit_LDADD = $(top_builddir)/lib/libnbd.la
+
+interop_nbdkit_tls_certs_SOURCES = interop.c
+interop_nbdkit_tls_certs_CPPFLAGS = \
+ -I$(top_srcdir)/include \
+ -DSERVER=\"$(NBDKIT)\" \
+ -DSERVER_PARAMS='"--tls=require",
"--tls-certificates=../tests/pki", "-s",
"--exit-with-parent", "file", tmpfile' \
+ -DCERTS=1 \
+ $(NULL)
+interop_nbdkit_tls_certs_CFLAGS = $(WARNINGS_CFLAGS)
+interop_nbdkit_tls_certs_LDADD = $(top_builddir)/lib/libnbd.la
+
+interop_nbdkit_tls_psk_SOURCES = interop.c
+interop_nbdkit_tls_psk_CPPFLAGS = \
+ -I$(top_srcdir)/include \
+ -DSERVER=\"$(NBDKIT)\" \
+ -DSERVER_PARAMS='"--tls=require", "--tls-psk=../tests/keys.psk",
"-s", "--exit-with-parent", "file", tmpfile' \
+ -DPSK=1 \
+ $(NULL)
+interop_nbdkit_tls_psk_CFLAGS = $(WARNINGS_CFLAGS)
+interop_nbdkit_tls_psk_LDADD = $(top_builddir)/lib/libnbd.la
+
+endif HAVE_NBDKIT
+
check-valgrind:
LIBNBD_VALGRIND=1 $(MAKE) check
--
2.23.0
5:35 p.m.
New subject: [PATCH libnbd 4/5] interop: Add -DTLS_MODE to the test.
This neutral refactoring adds -DTLS_MODE. We can in future change the
requested TLS mode, but not in this commit.
It also checks that nbd_get_tls_negotiated returns true after
connecting, when the requested mode was set to LIBNBD_TLS_REQUIRE.
---
interop/Makefile.am | 4 ++++
interop/interop.c | 26 ++++++++++++++++++++------
2 files changed, 24 insertions(+), 6 deletions(-)
diff --git a/interop/Makefile.am b/interop/Makefile.am
index 9cb8071..8a5b787 100644
--- a/interop/Makefile.am
+++ b/interop/Makefile.am
@@ -100,6 +100,7 @@ interop_qemu_nbd_tls_certs_CPPFLAGS = \
-DSERVER_PARAMS='"--object",
"tls-creds-x509,id=tls0,endpoint=server,dir=$(abs_top_builddir)/tests/pki",
"--tls-creds", "tls0", "-f", "raw",
"-x", "/", "-p", port_str, tmpfile' \
-DEXPORT_NAME='"/"' \
-DCERTS=1 \
+ -DTLS_MODE=LIBNBD_TLS_REQUIRE \
$(NULL)
interop_qemu_nbd_tls_certs_CFLAGS = $(WARNINGS_CFLAGS)
interop_qemu_nbd_tls_certs_LDADD = $(top_builddir)/lib/libnbd.la
@@ -113,6 +114,7 @@ interop_qemu_nbd_tls_psk_CPPFLAGS = \
-DSERVER_PARAMS='"--object",
"tls-creds-psk,id=tls0,endpoint=server,dir=$(abs_top_builddir)/tests",
"--tls-creds", "tls0", "-f", "raw",
"-x", "/", "-p", port_str, tmpfile' \
-DEXPORT_NAME='"/"' \
-DPSK=1 \
+ -DTLS_MODE=LIBNBD_TLS_REQUIRE \
$(NULL)
interop_qemu_nbd_tls_psk_CFLAGS = $(WARNINGS_CFLAGS)
interop_qemu_nbd_tls_psk_LDADD = $(top_builddir)/lib/libnbd.la
@@ -173,6 +175,7 @@ interop_nbdkit_tls_certs_CPPFLAGS = \
-DSERVER=\"$(NBDKIT)\" \
-DSERVER_PARAMS='"--tls=require",
"--tls-certificates=../tests/pki", "-s",
"--exit-with-parent", "file", tmpfile' \
-DCERTS=1 \
+ -DTLS_MODE=LIBNBD_TLS_REQUIRE \
$(NULL)
interop_nbdkit_tls_certs_CFLAGS = $(WARNINGS_CFLAGS)
interop_nbdkit_tls_certs_LDADD = $(top_builddir)/lib/libnbd.la
@@ -183,6 +186,7 @@ interop_nbdkit_tls_psk_CPPFLAGS = \
-DSERVER=\"$(NBDKIT)\" \
-DSERVER_PARAMS='"--tls=require", "--tls-psk=../tests/keys.psk",
"-s", "--exit-with-parent", "file", tmpfile' \
-DPSK=1 \
+ -DTLS_MODE=LIBNBD_TLS_REQUIRE \
$(NULL)
interop_nbdkit_tls_psk_CFLAGS = $(WARNINGS_CFLAGS)
interop_nbdkit_tls_psk_LDADD = $(top_builddir)/lib/libnbd.la
diff --git a/interop/interop.c b/interop/interop.c
index 0b7b1a5..2772721 100644
--- a/interop/interop.c
+++ b/interop/interop.c
@@ -35,6 +35,13 @@
#define SIZE (1024*1024)
+#if CERTS || PSK
+#define TLS 1
+#ifndef TLS_MODE
+#error "TLS_MODE must be defined when using CERTS || PSK"
+#endif
+#endif
+
int
main (int argc, char *argv[])
{
@@ -73,15 +80,12 @@ main (int argc, char *argv[])
}
#endif
-#if CERTS || PSK
- /* Require TLS on the handle and fail if not available or if the
- * handshake fails.
- */
+#if TLS
if (nbd_supports_tls (nbd) != 1) {
fprintf (stderr, "skip: compiled without TLS support\n");
exit (77);
}
- if (nbd_set_tls (nbd, LIBNBD_TLS_REQUIRE) == -1) {
+ if (nbd_set_tls (nbd, TLS_MODE) == -1) {
fprintf (stderr, "%s\n", nbd_get_error ());
exit (EXIT_FAILURE);
}
@@ -142,6 +146,16 @@ main (int argc, char *argv[])
#endif
+#if TLS
+ if (TLS_MODE == LIBNBD_TLS_REQUIRE &&
+ nbd_get_tls_negotiated (nbd) != 1) {
+ fprintf (stderr,
+ "%s: TLS required, but not negotiated on the connection\n",
+ argv[0]);
+ goto out;
+ }
+#endif
+
actual_size = nbd_get_size (nbd);
if (actual_size == -1) {
fprintf (stderr, "%s\n", nbd_get_error ());
@@ -160,7 +174,7 @@ main (int argc, char *argv[])
/* XXX In future test more operations here. */
-#if !CERTS && !PSK
+#if !TLS
/* XXX qemu doesn't shut down the connection nicely (using
* gnutls_bye) and because of this the following call will fail
* with:
--
2.23.0
7:41 a.m.
New subject: [PATCH libnbd 4/5] interop: Add -DTLS_MODE to the test.
On 9/17/19 5:35 PM, Richard W.M. Jones wrote:
This neutral refactoring adds -DTLS_MODE. We can in future change
the
requested TLS mode, but not in this commit.
It also checks that nbd_get_tls_negotiated returns true after
connecting, when the requested mode was set to LIBNBD_TLS_REQUIRE.
---
interop/Makefile.am | 4 ++++
interop/interop.c | 26 ++++++++++++++++++++------
2 files changed, 24 insertions(+), 6 deletions(-)
+#if CERTS || PSK
+#define TLS 1
+#ifndef TLS_MODE
+#error "TLS_MODE must be defined when using CERTS || PSK"
+#endif
+#endif
+
int
main (int argc, char *argv[])
{
@@ -73,15 +80,12 @@ main (int argc, char *argv[])
}
#endif
-#if CERTS || PSK
- /* Require TLS on the handle and fail if not available or if the
- * handshake fails.
- */
+#if TLS
if (nbd_supports_tls (nbd) != 1) {
fprintf (stderr, "skip: compiled without TLS support\n");
exit (77);
}
This skips the test if we are compiled without TLS support, even if
TLS_ALLOW was requested. What behavior do we really want there? Is
TLS_ALLOW unconditionally falling back to plaintext okay, or do we only
want to permit TLS_ALLOW if TLS support is at least plausible?
Otherwise, the series is fine.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
10:05 a.m.
New subject: [PATCH libnbd 4/5] interop: Add -DTLS_MODE to the test.
On Wed, Sep 18, 2019 at 07:41:52AM -0500, Eric Blake wrote:
On 9/17/19 5:35 PM, Richard W.M. Jones wrote:
> +#if TLS
> if (nbd_supports_tls (nbd) != 1) {
> fprintf (stderr, "skip: compiled without TLS support\n");
> exit (77);
> }
This skips the test if we are compiled without TLS support, even if
TLS_ALLOW was requested. What behavior do we really want there? Is
TLS_ALLOW unconditionally falling back to plaintext okay, or do we only
want to permit TLS_ALLOW if TLS support is at least plausible?
I didn't consider this case until now. I did run the patch series as
posted without gnutls and it does work. None of the tests run (they
are not even skipped) because of the ‘if HAVE_GNUTLS’ conditional. We
could remove the code above completely although I'm not going to do
that.
Because we need certtool/psktool to build the certificates etc we
cannot test non-gnutls-libnbd + tls enabled nbdkit.
I believe the only way to test this would be a new dedicated test for
this specific case.
Also worth noting that the current code (lib/crypto.c) doesn't even
let you to set LIBNBD_TLS_ALLOW, so the dedicated test would fail
anyway unless this was fixed:
https://github.com/libguestfs/libnbd/blob/b47693488177ce7868d19f2a3eac5a5...
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
5:35 p.m.
New subject: [PATCH libnbd 5/5] interop: Add tests of nbdkit + LIBNBD_TLS_ALLOW.
Test both the TLS enabled and fallback paths.
nbd-server doesn't appear to support TLS at all, and qemu-nbd is known
not to allow fallback to unencrypted, and therefore it only makes
sense to test nbdkit at the moment.
---
.gitignore | 4 ++++
TODO | 3 ---
interop/Makefile.am | 54 +++++++++++++++++++++++++++++++++++++++++++++
interop/interop.c | 30 ++++++++++++++++++++-----
4 files changed, 82 insertions(+), 9 deletions(-)
diff --git a/.gitignore b/.gitignore
index ab47370..dd8a052 100644
--- a/.gitignore
+++ b/.gitignore
@@ -62,7 +62,11 @@ Makefile.in
/interop/dirty-bitmap
/interop/interop-nbdkit
/interop/interop-nbdkit-tls-certs
+/interop/interop-nbdkit-tls-certs-allow-enabled
+/interop/interop-nbdkit-tls-certs-allow-fallback
/interop/interop-nbdkit-tls-psk
+/interop/interop-nbdkit-tls-psk-allow-enabled
+/interop/interop-nbdkit-tls-psk-allow-fallback
/interop/interop-nbd-server
/interop/interop-qemu-nbd
/interop/interop-qemu-nbd-tls-certs
diff --git a/TODO b/TODO
index 21feb2f..642d39f 100644
--- a/TODO
+++ b/TODO
@@ -17,9 +17,6 @@ NBD_INFO_BLOCK_SIZE.
TLS should properly shut down the session (calling gnutls_bye).
-LIBNBD_TLS_ALLOW is not tested. Related to this,
-nbd_get_tls_negotiated is not tested.
-
Implement nbd_connect + systemd socket activation.
Improve function trace output so that:
diff --git a/interop/Makefile.am b/interop/Makefile.am
index 8a5b787..43350a8 100644
--- a/interop/Makefile.am
+++ b/interop/Makefile.am
@@ -145,17 +145,25 @@ if HAVE_GNUTLS
if HAVE_CERTTOOL
check_PROGRAMS += \
interop-nbdkit-tls-certs \
+ interop-nbdkit-tls-certs-allow-enabled \
+ interop-nbdkit-tls-certs-allow-fallback \
$(NULL)
TESTS += \
interop-nbdkit-tls-certs \
+ interop-nbdkit-tls-certs-allow-enabled \
+ interop-nbdkit-tls-certs-allow-fallback \
$(NULL)
endif
if HAVE_PSKTOOL
check_PROGRAMS += \
interop-nbdkit-tls-psk \
+ interop-nbdkit-tls-psk-allow-enabled \
+ interop-nbdkit-tls-psk-allow-fallback \
$(NULL)
TESTS += \
interop-nbdkit-tls-psk \
+ interop-nbdkit-tls-psk-allow-enabled \
+ interop-nbdkit-tls-psk-allow-fallback \
$(NULL)
endif
endif
@@ -180,6 +188,29 @@ interop_nbdkit_tls_certs_CPPFLAGS = \
interop_nbdkit_tls_certs_CFLAGS = $(WARNINGS_CFLAGS)
interop_nbdkit_tls_certs_LDADD = $(top_builddir)/lib/libnbd.la
+interop_nbdkit_tls_certs_allow_enabled_SOURCES = interop.c
+interop_nbdkit_tls_certs_allow_enabled_CPPFLAGS = \
+ -I$(top_srcdir)/include \
+ -DSERVER=\"$(NBDKIT)\" \
+ -DSERVER_PARAMS='"--tls=require",
"--tls-certificates=../tests/pki", "-s",
"--exit-with-parent", "file", tmpfile' \
+ -DCERTS=1 \
+ -DTLS_MODE=LIBNBD_TLS_ALLOW \
+ $(NULL)
+interop_nbdkit_tls_certs_allow_enabled_CFLAGS = $(WARNINGS_CFLAGS)
+interop_nbdkit_tls_certs_allow_enabled_LDADD = $(top_builddir)/lib/libnbd.la
+
+interop_nbdkit_tls_certs_allow_fallback_SOURCES = interop.c
+interop_nbdkit_tls_certs_allow_fallback_CPPFLAGS = \
+ -I$(top_srcdir)/include \
+ -DSERVER=\"$(NBDKIT)\" \
+ -DSERVER_PARAMS='"--tls=off", "-s",
"--exit-with-parent", "file", tmpfile' \
+ -DCERTS=1 \
+ -DTLS_MODE=LIBNBD_TLS_ALLOW \
+ -DTLS_FALLBACK=1 \
+ $(NULL)
+interop_nbdkit_tls_certs_allow_fallback_CFLAGS = $(WARNINGS_CFLAGS)
+interop_nbdkit_tls_certs_allow_fallback_LDADD = $(top_builddir)/lib/libnbd.la
+
interop_nbdkit_tls_psk_SOURCES = interop.c
interop_nbdkit_tls_psk_CPPFLAGS = \
-I$(top_srcdir)/include \
@@ -191,6 +222,29 @@ interop_nbdkit_tls_psk_CPPFLAGS = \
interop_nbdkit_tls_psk_CFLAGS = $(WARNINGS_CFLAGS)
interop_nbdkit_tls_psk_LDADD = $(top_builddir)/lib/libnbd.la
+interop_nbdkit_tls_psk_allow_enabled_SOURCES = interop.c
+interop_nbdkit_tls_psk_allow_enabled_CPPFLAGS = \
+ -I$(top_srcdir)/include \
+ -DSERVER=\"$(NBDKIT)\" \
+ -DSERVER_PARAMS='"--tls=require", "--tls-psk=../tests/keys.psk",
"-s", "--exit-with-parent", "file", tmpfile' \
+ -DPSK=1 \
+ -DTLS_MODE=LIBNBD_TLS_ALLOW \
+ $(NULL)
+interop_nbdkit_tls_psk_allow_enabled_CFLAGS = $(WARNINGS_CFLAGS)
+interop_nbdkit_tls_psk_allow_enabled_LDADD = $(top_builddir)/lib/libnbd.la
+
+interop_nbdkit_tls_psk_allow_fallback_SOURCES = interop.c
+interop_nbdkit_tls_psk_allow_fallback_CPPFLAGS = \
+ -I$(top_srcdir)/include \
+ -DSERVER=\"$(NBDKIT)\" \
+ -DSERVER_PARAMS='"--tls=off", "-s",
"--exit-with-parent", "file", tmpfile' \
+ -DPSK=1 \
+ -DTLS_MODE=LIBNBD_TLS_ALLOW \
+ -DTLS_FALLBACK=1 \
+ $(NULL)
+interop_nbdkit_tls_psk_allow_fallback_CFLAGS = $(WARNINGS_CFLAGS)
+interop_nbdkit_tls_psk_allow_fallback_LDADD = $(top_builddir)/lib/libnbd.la
+
endif HAVE_NBDKIT
check-valgrind:
diff --git a/interop/interop.c b/interop/interop.c
index 2772721..3d916f2 100644
--- a/interop/interop.c
+++ b/interop/interop.c
@@ -147,12 +147,30 @@ main (int argc, char *argv[])
#endif
#if TLS
- if (TLS_MODE == LIBNBD_TLS_REQUIRE &&
- nbd_get_tls_negotiated (nbd) != 1) {
- fprintf (stderr,
- "%s: TLS required, but not negotiated on the connection\n",
- argv[0]);
- goto out;
+ if (TLS_MODE == LIBNBD_TLS_REQUIRE) {
+ if (nbd_get_tls_negotiated (nbd) != 1) {
+ fprintf (stderr,
+ "%s: TLS required, but not negotiated on the connection\n",
+ argv[0]);
+ goto out;
+ }
+ }
+ else if (TLS_MODE == LIBNBD_TLS_ALLOW) {
+#if TLS_FALLBACK
+ if (nbd_get_tls_negotiated (nbd) != 0) {
+ fprintf (stderr,
+ "%s: TLS disabled, but connection didn't fall back to
plaintext\n",
+ argv[0]);
+ goto out;
+ }
+#else // !TLS_FALLBACK
+ if (nbd_get_tls_negotiated (nbd) != 1) {
+ fprintf (stderr,
+ "%s: TLS required, but not negotiated on the connection\n",
+ argv[0]);
+ goto out;
+ }
+#endif
}
#endif
--
2.23.0
7:41 a.m.
New subject: [PATCH libnbd 5/5] interop: Add tests of nbdkit + LIBNBD_TLS_ALLOW.
On 9/17/19 5:35 PM, Richard W.M. Jones wrote:
Test both the TLS enabled and fallback paths.
nbd-server doesn't appear to support TLS at all, and qemu-nbd is known
not to allow fallback to unencrypted, and therefore it only makes
sense to test nbdkit at the moment.
---
.gitignore | 4 ++++
+interop_nbdkit_tls_certs_allow_enabled_SOURCES = interop.c
+interop_nbdkit_tls_certs_allow_enabled_CPPFLAGS = \
+ -I$(top_srcdir)/include \
+ -DSERVER=\"$(NBDKIT)\" \
+ -DSERVER_PARAMS='"--tls=require",
"--tls-certificates=../tests/pki", "-s",
"--exit-with-parent", "file", tmpfile' \
Is it worth testing nbdkit's --tls=yes (the counterpart to libnbd
TLS_ALLOW), to show that a server that permits but does not require
encryption can accept a plaintext client?
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
10:05 a.m.
New subject: [PATCH libnbd 5/5] interop: Add tests of nbdkit + LIBNBD_TLS_ALLOW.
On Wed, Sep 18, 2019 at 07:41:50AM -0500, Eric Blake wrote:
On 9/17/19 5:35 PM, Richard W.M. Jones wrote:
> Test both the TLS enabled and fallback paths.
>
> nbd-server doesn't appear to support TLS at all, and qemu-nbd is known
> not to allow fallback to unencrypted, and therefore it only makes
> sense to test nbdkit at the moment.
> ---
> .gitignore | 4 ++++
> +interop_nbdkit_tls_certs_allow_enabled_SOURCES = interop.c
> +interop_nbdkit_tls_certs_allow_enabled_CPPFLAGS = \
> + -I$(top_srcdir)/include \
> + -DSERVER=\"$(NBDKIT)\" \
> + -DSERVER_PARAMS='"--tls=require",
"--tls-certificates=../tests/pki", "-s",
"--exit-with-parent", "file", tmpfile' \
Is it worth testing nbdkit's --tls=yes (the counterpart to libnbd
TLS_ALLOW), to show that a server that permits but does not require
encryption can accept a plaintext client?
Definitely a test we need, in nbdkit :-)
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
1816
days inactive
1817
days old
9 comments
2 participants
participants (2)
-
Eric Blake -
Richard W.M. Jones