10:30 a.m.
---
v2v/virt-v2v.pl | 140 ++++++++++++++++++++++++++++++++++++++++---------------
1 files changed, 102 insertions(+), 38 deletions(-)
diff --git a/v2v/virt-v2v.pl b/v2v/virt-v2v.pl
index c1a4728..3559738 100755
--- a/v2v/virt-v2v.pl
+++ b/v2v/virt-v2v.pl
@@ -21,7 +21,6 @@ use strict;
use Pod::Usage;
use Getopt::Long;
-#use Data::Dumper;
use File::Spec;
use File::stat;
@@ -50,16 +49,19 @@ virt-v2v - Convert a guest to use KVM
=head1 SYNOPSIS
- virt-v2v -f virt-v2v.conf -i libvirtxml guest-domain.xml
+ virt-v2v -f virt-v2v.conf -i libvirtxml -op transfer guest-domain.xml
- virt-v2v -f virt-v2v.conf -ic esx://esx.server/ -op transfer guest-domain
+ virt-v2v -f virt-v2v.conf -ic esx://esx.server/ -op transfer esx_guest
+
+ virt-v2v -f virt-v2v.conf -ic esx://esx.server/ \
+ -o rhev -osd rhev.nfs.storage:/export_domain guest esx_guest
=head1 DESCRIPTION
virt-v2v converts guests from a foreign hypervisor to run on KVM, managed by
-libvirt. It can currently convert Red Hat Enterprise Linux and Fedora guests
-running on Xen and VMware ESX. It will enable VirtIO drivers in the converted
-guest if possible.
+libvirt or Red Hat Enterprise Virtualisation (RHEV) version 2.2 or later. It can
+currently convert Red Hat Enterprise Linux and Fedora guests running on Xen and
+VMware ESX. It will enable VirtIO drivers in the converted guest if possible.
=head1 OPTIONS
@@ -116,7 +118,13 @@ Specifies the output method. Supported output methods are:
=item libvirt
-Create a libvirt guest. See the I<-oc> and I<-op> options.
+Create a libvirt guest. See the I<-oc> and I<-op> options. I<-op> must
be
+specified for the libvirt output method.
+
+=item rhev
+
+Create a guest on a RHEV 'Export' storage domain, which can later be imported
+into RHEV using the UI. I<-osd> must be specified for the rhev output method.
=back
@@ -478,14 +486,8 @@ sub inspect_guest
my %fses =
inspect_all_partitions ($g, \@partitions);
- #print "fses -----------\n";
- #print Dumper(\%fses);
-
my $oses = inspect_operating_systems ($g, \%fses);
- #print "oses -----------\n";
- #print Dumper($oses);
-
# Only work on single-root operating systems.
my $root_dev;
my @roots = keys %$oses;
@@ -522,17 +524,6 @@ local Xen guests are currently supported. These steps are not
required for
conversions from ESX, and will not be required for remote Xen guests when we
support that.
-=head3 Backup the guest
-
-If converting a local guest using the libvirtxml input method, the guest will be
-converted in place: it will make changes to a guest directly without creating a
-backup. It is recommended that virt-v2v be run against a copy.
-
-The L<v2v-snapshot(1)> tool can be used to convert a guest to use a snapshot
-for storage prior to running virt-v2v against it. This snapshot can then be
-committed to the original storage after the conversion is confirmed as
-successful.
-
=head3 Obtain domain XML for the guest domain
virt-v2v uses a libvirt domain description to determine the current
@@ -545,19 +536,18 @@ This will require a reboot if the host running Xen is the same host
that will
run KVM. This is because libvirt needs to connect to a running xen hypervisor to
obtain its metadata.
-=head2 ESX guests
+=head2 Converting to run on libvirt/KVM
=head3 Create a local storage pool for transferred storage
-virt-v2v copies the guest storage to the local machine during import from an ESX
-server. It creates new storage in a locally defined libvirt pool. This pool can
-be defined using any libvirt tool, and can be of any type.
+virt-v2v copies the guest storage to the local machine during import. When
+converting to run on libvirt, it creates new storage in a locally defined
+libvirt pool. This pool can be defined using any libvirt tool, and can be of any
+type.
The simplest way to create a new pool is with L<virt-manager(1)>. Pools can be
defined from the Storage tab under Host Details.
-=head2 All guests
-
=head3 Create local network interfaces
The local machine must have an appropriate network for the converted guest
@@ -566,6 +556,20 @@ be created using standard tools on the host.
Since version 0.8.3, L<virt-manager(1)> can also create and manage bridges.
+=head2 Converting to run on RHEV
+
+=head3 Create an NFS export domain
+
+virt-v2v can convert guests to run on RHEV 2.2 or later. It does this by writing
+the converted guest directly to an 'Export' NFS storage domain. The guest can
+later be imported into a RHEV Data Center through the UI.
+
+In RHEV 2.2, a new Export storage domain is created by clicking on 'New Domain'
+in the Storage tab. Ensure that the Domain function is 'Export' and the Storage
+type is 'NFS'. See the RHEV documentation for details. The NFS storage domain
must be mountable by the machine running virt-v2v.
+
+B<N.B.> When exporting to RHEV, virt-v2v must run as root.
+
=head1 CONVERTING A LOCAL XEN GUEST
The following requires that the domain XML is available locally, and that the
@@ -573,9 +577,11 @@ storage referred to in the domain XML is available locally at the
same paths.
To perform the conversion, run:
- virt-v2v -f virt-v2v.conf -i libvirtxml <domain>.xml
+ virt-v2v -f virt-v2v.conf -i libvirtxml -op <pool> <domain>.xml
-where C<< <domain>.xml >> is the path to the exported guest
domain's xml. virt-v2v.conf should specify:
+where C<< <domain>.xml >> is the path to the exported guest
domain's xml, and
+C<< <pool> >> is the local storage pool where copies of the guest's
disks will
+be created. virt-v2v.conf should specify:
=over
@@ -595,9 +601,9 @@ It is possible to avoid specifying replacement kernels in the virt-v2v
config
file by ensuring that the guest has an appropriate kernel installed prior to
conversion. If your guest uses a Xen paravirtualised kernel (it would be called
something like kernel-xen or kernel-xenU), you can install a regular kernel,
-which won't reference a hypervisor in its name, alongside it. You shouldn't
-make this newly installed kernel your default kernel because the chances are Xen
-will not boot it. virt-v2v will make it the default during conversion.
+which won't reference a hypervisor in its name, alongside it. You shouldn't make
+this newly installed kernel your default kernel because Xen may not boot it.
+virt-v2v will make it the default during conversion.
=head2 CONVERTING A GUEST FROM VMWARE ESX
@@ -650,19 +656,78 @@ entry is:
=head3 Connecting to an ESX server with an invalid certificate
-In non-production environments, the ESX server may have a non-valid certificate,
+In non-production environments, the ESX server may have an invalid certificate,
for example a self-signed certificate. In this case, certificate checking can be
explicitly disabled by adding '?no_verify=1' to the connection URI as shown
below:
... -ic esx://<esx.server>/?no_verify=1 ...
+=head1 EXPORTING A GUEST TO RHEV
+
+virt-v2v can export to RHEV any guest that it can convert. This includes:
+
+=over
+
+=item *
+
+Local Xen guests
+
+=item *
+
+ESX guests
+
+=item *
+
+Local libvirt/KVM guests
+
+=back
+
+To export to RHEV, specify:
+
+ ... -o rhev -osd <export_sd> ...
+
+on the command line in place of I<-op> as in the following examples:
+
+=over
+
+=item Exporting a local Xen guest to RHEV
+
+virt-v2v -f virt-v2v.conf -i libvirtxml -o rhev -osd <export_sd>
<domain>.xml
+
+=item Export a VMWare ESX guest to RHEV
+
+virt-v2v -f virt-v2v.conf -ic esx://<esx.server>/ -o rhev -osd <export_sd>
<domain>
+
+=item Export a local libvirt/KVM guest to RHEV
+
+virt-v2v -f virt-v2v.conf -o rhev -osd <export_sd> <domain>
+
+=back
+
+Ensure that I<virt-v2v.conf> contains a correct network mapping for your target
+RHEV configuration.
+
=head1 RUNNING THE CONVERTED GUEST
+=head2 Libvirt output method
+
On successful completion, virt-v2v will create a new libvirt domain for the
converted guest with the same name as the original guest. It can be started as
usual using libvirt tools, for example L<virt-manager(1)>.
+=head2 RHEV output method
+
+On successful completion virt-v2v will have written the new guest to the export
+storage domain, but it will not yet be ready to run. It must be imported into
+RHEV using the UI before it can be used.
+
+In RHEV 2.2 this is done from the Storage tab. Select the export domain the
+guest was written to. A pane will appear underneath the storage domain list
+displaying several tabs, one of which is 'VM Import'. The converted guest will
+be listed here. Select the appropriate guest an click 'Import'. See the RHEV
+documentation for additional details.
+
=head1 POST-CONVERSION TASKS
=head2 Guest network configuration
@@ -729,13 +794,12 @@ Additionally, initrd will preload the virtio_pci driver.
=head2 Non-VirtIO
X display cirrus
- Block sym53c8xx (scsi)
+ Block IDE
Network e1000
=head1 SEE ALSO
L<virt-manager(1)>,
-L<v2v-snapshot(1)>,
L<http://libguestfs.org/>;.
=head1 AUTHOR
--
1.6.6.1