6:44 a.m.
There were a few "infelicities" that kept the "make distcheck"
test from passing. These three patches combine to fix all of them,
punting on only one by disabling the install-data-hook rule.
From 7504acedcb71bd80d99abe412e6669b267cade38 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering(a)redhat.com>
Date: Fri, 21 Aug 2009 13:37:18 +0200
Subject: [PATCH 1/3] build: use newer gettext files
* configure.ac: Use gettext 0.15, not 0.14.
---
configure.ac | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/configure.ac b/configure.ac
index 3e057d7..204bfb6 100644
--- a/configure.ac
+++ b/configure.ac
@@ -54,7 +54,7 @@ test "x$MKISOFS" = "xno" &&
AC_MSG_ERROR([mkisofs must be installed])
dnl For i18n.
AM_GNU_GETTEXT([external])
-AM_GNU_GETTEXT_VERSION([0.14])
+AM_GNU_GETTEXT_VERSION([0.15])
dnl Check for Perl
AC_CHECK_PROG([PERL],[perl],[perl],[no])
--
1.6.4.378.g88f2f
From b077a19ae444aadfe8baf5d29df7125394b1a867 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering(a)redhat.com>
Date: Fri, 21 Aug 2009 13:32:03 +0200
Subject: [PATCH 2/3] configure.ac: correct typo in package name
* configure.ac (PACKAGE_NAME): It's virt-v2v, not virtv2v.
---
configure.ac | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/configure.ac b/configure.ac
index 204bfb6..9acc430 100644
--- a/configure.ac
+++ b/configure.ac
@@ -22,7 +22,7 @@ m4_define([virtv2v_release], [68])
# extra can be any string
m4_define([virtv2v_extra], [])
-AC_INIT([virtv2v],virtv2v_major.virtv2v_minor.virtv2v_release[]virtv2v_extra)
+AC_INIT([virt-v2v],virtv2v_major.virtv2v_minor.virtv2v_release[]virtv2v_extra)
AC_CONFIG_AUX_DIR([build-aux])
AM_INIT_AUTOMAKE([foreign])
--
1.6.4.378.g88f2f
From 2e33faf68770703d832f693528229dc3676ecace Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering(a)redhat.com>
Date: Fri, 21 Aug 2009 12:45:46 +0200
Subject: [PATCH 3/3] build: arrange for "make distcheck" to pass
* perl/Makefile.am (install-data-hook): Remove rule, for now.
(clean-local): Use perl's "realclean" target, not "clean".
The latter would fail to remove Makefile-pl.old.
* Makefile.am (CLEANFILES): Define, to clean up after pod2html.
* v2v/Makefile.am (CLEANFILES): Define, so that "make clean"
removes generated *.1 files.
* v2v/Makefile.am (virt-v2v.1): Don't redirect directly to $@.
*** empty log message ***
---
Makefile.am | 2 ++
perl/Makefile.am | 7 ++++---
v2v/Makefile.am | 4 +++-
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/Makefile.am b/Makefile.am
index 4e75eb0..9e2918b 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -18,3 +18,5 @@
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = perl po v2v
+
+CLEANFILES = pod2htmd.tmp pod2htmi.tmp html/$(PACKAGE_NAME).1.html
diff --git a/perl/Makefile.am b/perl/Makefile.am
index f0d73f1..414abdb 100644
--- a/perl/Makefile.am
+++ b/perl/Makefile.am
@@ -33,8 +33,9 @@ Makefile-pl: Makefile.PL
#CLEANFILES = Makefile-pl
clean-local:
- -$(MAKE) -f Makefile-pl clean
+ -$(MAKE) -f Makefile-pl realclean
rm -f Makefile-pl
-install-data-hook:
- $(MAKE) -f Makefile-pl DESTDIR=$(DESTDIR) install
+# Don't do this: it causes "make distcheck" to fail.
+#install-data-hook:
+# $(MAKE) -f Makefile-pl DESTDIR=$(DESTDIR) install
diff --git a/v2v/Makefile.am b/v2v/Makefile.am
index 49dac50..5030742 100644
--- a/v2v/Makefile.am
+++ b/v2v/Makefile.am
@@ -20,15 +20,17 @@ EXTRA_DIST = \
virt-v2v.pl
man_MANS = virt-v2v.1
+CLEANFILES = $(man_MANS)
noinst_DATA = @top_builddir(a)/html/virt-v2v.1.html
virt-v2v.1: virt-v2v.pl
+ rm -f $@-t $@
$(POD2MAN) \
--section 1 \
-c "Virtualization Support" \
--release "$(PACKAGE_NAME)-$(PACKAGE_VERSION)" \
- $< > $@
+ $< > $@-t && mv $@-t $@
@top_builddir(a)/html/virt-v2v.1.html: virt-v2v.pl
mkdir -p @top_builddir@/html
--
1.6.4.378.g88f2f