October 2016 - Libguestfs - Libguestfs List Archives

[PATCH] launch: libvirt: Remove unused USB and memballoon devices.

by Richard W.M. Jones

Thanks: Laine Stump. See also: https://www.redhat.com/archives/libvir-list/2016-October/msg00246.html --- src/launch-libvirt.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/src/launch-libvirt.c b/src/launch-libvirt.c index d8479dc..8779dcb 100644 --- a/src/launch-libvirt.c +++ b/src/launch-libvirt.c @@ -1397,6 +1397,18 @@ construct_libvirt_xml_devices (guestfs_h *g, } end_element (); } + /* Libvirt adds some devices by default. Indicate to libvirt + * that we don't want them. + */ + start_element ("controller") { + attribute ("type", "usb"); + attribute ("model", "none"); + } end_element (); + + start_element ("memballoon") { + attribute ("model", "none"); + } end_element (); + } end_element (); /* </devices> */ return 0; -- 2.7.4

8 years, 2 months

2
1
0 / 0

[PATCH] p2v: Compress virt-p2v binary and store it in $libdir/virt-p2v (RHBZ#1382275).

by Richard W.M. Jones

Currently 'make install' installs the virt-p2v binary in /usr/libexec/virt-p2v on the host. It is never supposed to be run from there, even by another program, so use of /usr/libexec is incorrect. It is only supposed to be copied into USB keys / ISOs / etc created by virt-p2v-make-* scripts. The other problem with shipping a "naked" binary on the host is that packages built from that get all the dependencies of virt-p2v, for example Gtk. This is unnecessary just for running the command line scripts mentioned above. This changes the Makefile and scripts so that the binary is stored compressed in $libdir/virt-p2v/virt-p2v.xz. It is compressed to avoid exposing the dependencies. It is stored under $libdir since the binary is still architecture-dependent. A further change is that when we copy the binary into the virt-p2v ISO, it is now installed in /usr/bin instead of /usr/libexec. (And note that we always use /usr/bin, not $bindir, since this path should not need to be affected by the configuration of libguestfs). --- .gitignore | 2 +- p2v/Makefile.am | 24 ++++++++++++++---------- p2v/{launch-virt-p2v.in => launch-virt-p2v} | 5 ++--- p2v/p2v.ks.in | 4 ++-- p2v/virt-p2v-make-disk.in | 29 ++++++++++++++--------------- p2v/virt-p2v-make-disk.pod | 4 ++-- p2v/virt-p2v-make-kickstart.in | 15 ++++----------- p2v/virt-p2v-make-kickstart.pod | 2 +- p2v/virt-p2v-make-kiwi.in | 15 +++------------ p2v/virt-p2v-make-kiwi.pod | 2 +- 10 files changed, 44 insertions(+), 58 deletions(-) rename p2v/{launch-virt-p2v.in => launch-virt-p2v} (93%) diff --git a/.gitignore b/.gitignore index c4d6eda..a4be4ae 100644 --- a/.gitignore +++ b/.gitignore @@ -350,7 +350,6 @@ Makefile.in /p2v/dependencies.debian /p2v/dependencies.redhat /p2v/dependencies.suse -/p2v/launch-virt-p2v /p2v/stamp-test-virt-p2v-pxe-data-files /p2v/stamp-test-virt-p2v-pxe-hostkey /p2v/stamp-test-virt-p2v-pxe-kernel @@ -378,6 +377,7 @@ Makefile.in /p2v/virt-p2v-make-kickstart.1 /p2v/virt-p2v-make-kiwi /p2v/virt-p2v-make-kiwi.1 +/p2v/virt-p2v.xz /perl/_build /perl/bindtests.pl /perl/blib diff --git a/p2v/Makefile.am b/p2v/Makefile.am index 5cac334..9dbfa22 100644 --- a/p2v/Makefile.am +++ b/p2v/Makefile.am @@ -49,14 +49,25 @@ CLEANFILES += \ test-virt-p2v-pxe.vmlinuz \ test-virt-p2v-pxe.initramfs \ test-virt-p2v-pxe.sshd_config \ - virt-p2v.img + virt-p2v.img \ + virt-p2v.xz # Although virt-p2v is a regular binary, it is not usually installed # in /usr/bin since it only functions when contained in an ISO or PXE # image which is used to boot the physical machine (since otherwise # virt-p2v would not be able to get a consistent snapshot of the -# physical disks). -libexec_PROGRAMS = virt-p2v +# physical disks). Also we don't want the naked binary to appear on +# the host, which would cause various Gtk dependencies to be pulled +# in, so it must be compressed. +virtp2vlibdir = $(libdir)/virt-p2v +virtp2vlib_DATA = virt-p2v.xz + +virt-p2v.xz: virt-p2v + rm -f $@ $@-t + xz --best --keep --stdout $< > $@-t + mv $@-t $@ + +noinst_PROGRAMS = virt-p2v # Note that miniexpect comes from here: # http://git.annexia.org/?p=miniexpect.git;a=summary @@ -121,13 +132,6 @@ virtp2vdata_DATA = \ p2v.ks.in \ p2v.service -# Deal with stupid autotools libexecdir-not-expandable crap. -launch-virt-p2v: launch-virt-p2v.in - rm -f $@ $@-t - $(SED) 's,@''libexecdir@,$(libexecdir),g' < $< > $@-t - chmod 0555 $@-t - mv $@-t $@ - # Manual pages and HTML files for the website. man_MANS = \ virt-p2v.1 \ diff --git a/p2v/launch-virt-p2v.in b/p2v/launch-virt-p2v similarity index 93% rename from p2v/launch-virt-p2v.in rename to p2v/launch-virt-p2v index 454e9f4..908189c 100755 --- a/p2v/launch-virt-p2v.in +++ b/p2v/launch-virt-p2v @@ -1,5 +1,4 @@ #!/bin/bash - -# @configure_input@ # (C) Copyright 2014-2016 Red Hat Inc. # # This program is free software; you can redistribute it and/or modify @@ -23,7 +22,7 @@ cmdline=$(</proc/cmdline) if [[ $cmdline == *p2v.server=* ]]; then # Non-GUI mode, don't run X. Just run virt-p2v directly. - exec @libexecdir@/virt-p2v --iso --colours + exec /usr/bin/virt-p2v --iso --colours else # GUI mode. Run xinit to start X. To save one script, we invoke @@ -45,7 +44,7 @@ else metacity & nm-applet & esac - exec @libexecdir@/virt-p2v --iso --colours + exec /usr/bin/virt-p2v --iso --colours else xinit "$0" run fi diff --git a/p2v/p2v.ks.in b/p2v/p2v.ks.in index 62a9d01..f4a6fcb 100644 --- a/p2v/p2v.ks.in +++ b/p2v/p2v.ks.in @@ -122,11 +122,11 @@ EOF # Base64-decoding of virt-p2v binary # md5(virt-p2v) = __MD5SUM_VIRT_P2V__ -base64 -d <<EOF | gzip -cd > __LIBEXECDIR__/virt-p2v +base64 -d <<EOF | gzip -cd > /usr/bin/virt-p2v __BASE64_VIRT_P2V__ EOF -chmod 0755 __LIBEXECDIR__/virt-p2v +chmod 0755 /usr/bin/virt-p2v # Update the default getty target to login automatically as root without # prompting for a password diff --git a/p2v/virt-p2v-make-disk.in b/p2v/virt-p2v-make-disk.in index c5b5463..e99344a 100644 --- a/p2v/virt-p2v-make-disk.in +++ b/p2v/virt-p2v-make-disk.in @@ -22,17 +22,12 @@ unset CDPATH program="virt-p2v-make-disk" version="@PACKAGE_VERSION@" -# Deal with stupid autotools libexecdir-not-expandable crap. -prefix="@prefix@" -exec_prefix="@exec_prefix@" -libexecdir="@libexecdir@" - if [ -n "$VIRT_P2V_DATA_DIR" ]; then datadir="$VIRT_P2V_DATA_DIR" - host_libexecdir="$VIRT_P2V_DATA_DIR" + libdir="$VIRT_P2V_DATA_DIR" else datadir="@datadir@/virt-p2v" - host_libexecdir="@libexecdir@" + libdir="@libdir@/virt-p2v" fi # Parse the command line arguments. @@ -144,16 +139,16 @@ fi if [ -n "$arch" ]; then arch_option="--arch $arch" - virt_p2v_binary="$host_libexecdir/virt-p2v.$arch" + virt_p2v_xz_binary="$libdir/virt-p2v.$arch.xz" else - virt_p2v_binary="$host_libexecdir/virt-p2v" + virt_p2v_xz_binary="$libdir/virt-p2v.xz" fi -if [ ! -f "$virt_p2v_binary" ]; then - echo "$program: cannot find $virt_p2v_binary" +if [ ! -f "$virt_p2v_xz_binary" ]; then + echo "$program: cannot find $virt_p2v_xz_binary" if [ -n "$arch" ]; then echo "You used the '--arch' option, so it's likely that you will need to build" - echo "an virt-p2v.$arch binary yourself." + echo "a virt-p2v.$arch binary yourself." echo "See guestfs-building(1) section BUILDING i686 32 BIT VIRT-P2V for help." fi exit 1 @@ -167,6 +162,10 @@ cleanup () } trap cleanup INT QUIT TERM EXIT ERR +# Uncompress the virt-p2v binary into tmpdir. +virt_p2v_binary="$tmpdir/virt-p2v" +xzcat "$virt_p2v_xz_binary" > "$virt_p2v_binary" + # Variations depending on the target distro. The main difference # is in the list of distro packages we add to the base appliance. case "$osversion" in @@ -235,9 +234,9 @@ virt-builder "$osversion" \ --root-password password:p2v \ --upload "$datadir"/issue:/etc/issue \ --upload "$datadir"/issue:/etc/issue.net \ - --mkdir "$libexecdir" \ - --upload "$virt_p2v_binary":"$libexecdir"/virt-p2v \ - --chmod 0755:"$libexecdir"/virt-p2v \ + --mkdir /usr/bin \ + --upload "$virt_p2v_binary":/usr/bin/virt-p2v \ + --chmod 0755:/usr/bin/virt-p2v \ --upload "$datadir"/launch-virt-p2v:/usr/bin/ \ --chmod 0755:/usr/bin/launch-virt-p2v \ --upload "$datadir"/p2v.service:/etc/systemd/system/ \ diff --git a/p2v/virt-p2v-make-disk.pod b/p2v/virt-p2v-make-disk.pod index e88cfc1..28b563e 100644 --- a/p2v/virt-p2v-make-disk.pod +++ b/p2v/virt-p2v-make-disk.pod @@ -106,7 +106,7 @@ hypervisors. This option requires that you have built F<virt-p2v.$arch> (ie. usually F<virt-p2v.i686>) by some means, and that you install it next -to the ordinary F<virt-p2v> binary (eg. in libexecdir or +to the ordinary F<virt-p2v> binary (eg. in F<$libdir/virt-p2v/> or C<$VIRT_V2V_DATA_DIR>). This is outside the scope of this manual page, but you can find some tips in L<guestfs-building(1)/BUILDING i686 32 BIT VIRT-P2V>. @@ -169,7 +169,7 @@ Display version number and exit. =over 4 -=item F<$libexecdir/virt-p2v> +=item F<$libdir/virt-p2v/virt-p2v.xz> The L<virt-p2v(1)> binary which is copied into the bootable disk image. diff --git a/p2v/virt-p2v-make-kickstart.in b/p2v/virt-p2v-make-kickstart.in index 85217d5..529bfbe 100644 --- a/p2v/virt-p2v-make-kickstart.in +++ b/p2v/virt-p2v-make-kickstart.in @@ -103,17 +103,12 @@ fi set -e -# Deal with stupid autotools libexecdir-not-expandable crap. -prefix="@prefix@" -exec_prefix="@exec_prefix@" -libexecdir="@libexecdir@" - if [ -n "$VIRT_P2V_DATA_DIR" ]; then datadir="$VIRT_P2V_DATA_DIR" - host_libexecdir="$VIRT_P2V_DATA_DIR" + libdir="$VIRT_P2V_DATA_DIR" else datadir="@datadir@/virt-p2v" - host_libexecdir="@libexecdir@" + libdir="@libdir@" fi # Base64-encode the files that we need to embed into the kickstart. @@ -126,9 +121,9 @@ else base64_ssh_identity= fi -# virt-p2v binary is too large unless we strip it and compress it. +# virt-p2v binary is too large unless we strip it and recompress it. tmpfile="$(mktemp -u)" -cp $host_libexecdir/virt-p2v $tmpfile +xzcat $libdir/virt-p2v > $tmpfile md5sum_virt_p2v="$(md5sum $tmpfile | @AWK@ '{print $1}')" strip --strip-all $tmpfile gzip -9 $tmpfile @@ -207,7 +202,6 @@ done < $depsfile -v "extra_packages=$extra_packages" \ -v "md5sum_virt_p2v=$md5sum_virt_p2v" \ -v "repos=$repos" \ - -v "libexecdir=$libexecdir" \ '{ gsub (/__PACKAGE_NAME__/, "@PACKAGE_NAME@"); gsub (/__PACKAGE_VERSION__/, "@PACKAGE_VERSION@"); @@ -221,7 +215,6 @@ done < $depsfile gsub (/__EXTRA_PACKAGES__/, gensub (/,/, "\n", "g", extra_packages)); gsub (/__MD5SUM_VIRT_P2V__/, md5sum_virt_p2v); gsub (/__REPOS__/, repos); - gsub (/__LIBEXECDIR__/, libexecdir); print; }' \ $datadir/p2v.ks.in > $output-t diff --git a/p2v/virt-p2v-make-kickstart.pod b/p2v/virt-p2v-make-kickstart.pod index 7e41c9d..808ed72 100644 --- a/p2v/virt-p2v-make-kickstart.pod +++ b/p2v/virt-p2v-make-kickstart.pod @@ -287,7 +287,7 @@ Display version number and exit. =over 4 -=item F<$libexecdir/virt-p2v> +=item F<$libdir/virt-p2v/virt-p2v.xz> The L<virt-p2v(1)> binary which is copied into the kickstart file. diff --git a/p2v/virt-p2v-make-kiwi.in b/p2v/virt-p2v-make-kiwi.in index dc7fce4..405b629 100644 --- a/p2v/virt-p2v-make-kiwi.in +++ b/p2v/virt-p2v-make-kiwi.in @@ -82,17 +82,12 @@ done set -e -# Deal with stupid autotools libexecdir-not-expandable crap. -prefix="@prefix@" -exec_prefix="@exec_prefix@" -libexecdir="@libexecdir@" - if [ -n "$VIRT_P2V_DATA_DIR" ]; then datadir="$VIRT_P2V_DATA_DIR" - host_libexecdir="$VIRT_P2V_DATA_DIR" + libdir="$VIRT_P2V_DATA_DIR" else datadir="@datadir@/virt-p2v" - host_libexecdir="@libexecdir@" + libdir="@libdir@/virt-p2v" fi # Dependencies. Since kiwi is SUSE-specific, only include @@ -204,9 +199,7 @@ cp $datadir/issue $output/root/etc/issue mkdir -p $output/root/usr/bin cp $datadir/launch-virt-p2v $output/root/usr/bin - -mkdir -p $output/root/$libexecdir -cp $host_libexecdir/virt-p2v $output/root/$libexecdir +xzcat $libdir/virt-p2v.xz > $output/root/usr/bin/virt-p2v if test "z$ssh_identity" != "z"; then mkdir -p $output/root/var/tmp @@ -218,7 +211,6 @@ fi @AWK@ \ -v "dependencies=$dependencies" \ -v "md5sum_virt_p2v=$md5sum_virt_p2v" \ - -v "libexecdir=$libexecdir" \ -v "branding=$branding" \ -v "release_pkg=$release_pkg" \ -v "base_pattern=$base_pattern" \ @@ -229,7 +221,6 @@ fi gsub (/__PACKAGE_VERSION__/, "@PACKAGE_VERSION@"); gsub (/__PACKAGE_VERSION_FULL__/, "@PACKAGE_VERSION_FULL@"); gsub (//, dependencies); - gsub (/__LIBEXECDIR__/, libexecdir); gsub (/__BRANDING__/, branding); gsub (/__RELEASE_PKG__/, release_pkg); gsub (/__BASE_PATTERN__/, base_pattern); diff --git a/p2v/virt-p2v-make-kiwi.pod b/p2v/virt-p2v-make-kiwi.pod index 92556d9..0b5c35c 100644 --- a/p2v/virt-p2v-make-kiwi.pod +++ b/p2v/virt-p2v-make-kiwi.pod @@ -133,7 +133,7 @@ Display version number and exit. =over 4 -=item F<$libexecdir/virt-p2v> +=item F<$libdir/virt-p2v/virt-p2v.xz> The L<virt-p2v(1)> binary which is copied into the kiwi configuration. -- 2.9.3

8 years, 2 months

1
0
0 / 0

[PATCH] aarch64: Enable virtio-pci, replacing virtio-mmio.

by Richard W.M. Jones

This patch causes aarch64 to use virtio-pci instead of virtio-mmio. Virtio-pci is considerably faster than virtio-mmio, it's more like how other architectures work, and it supports hotplugging (although it's not likely we'd use the latter feature). I'm not necessarily suggesting that we apply this. Laine (CC'd) has some further patches to libvirt lined up which AIUI would make it simpler to do this. I have given this a little bit of testing and it works fine for simple operations on aarch64. I'm currently running the in-depth libguestfs test suite. Rich.

8 years, 2 months

2
2
0 / 0

[PATCH 0/2] supermin: use /etc/os-release

by Pino Toscano

Hi, let's make supermin use /etc/os-release as primary source instead of the various release files in /etc; apparently distros (e.g. openSUSE) are starting removing them. Thanks, Pino Toscano (2): Add simple handling of /etc/os-release Use os-release to detect the distro src/Makefile.am | 3 +++ src/dpkg.ml | 3 ++- src/os_release.ml | 78 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ src/os_release.mli | 26 ++++++++++++++++++ src/pacman.ml | 5 ++-- src/rpm.ml | 15 ++++++----- 6 files changed, 121 insertions(+), 9 deletions(-) create mode 100644 src/os_release.ml create mode 100644 src/os_release.mli -- 2.7.4

8 years, 2 months

4
8
0 / 0

[PATCH] v2v: test Debian/Ubuntu conversion

by Tomáš Golembiovský

Enable testing of Debian and Ubuntu guest conversion. Signed-off-by: Tomáš Golembiovský <tgolembi(a)redhat.com> --- v2v/Makefile.am | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/v2v/Makefile.am b/v2v/Makefile.am index a2f6969..1c06277 100644 --- a/v2v/Makefile.am +++ b/v2v/Makefile.am @@ -311,12 +311,19 @@ check-slow: real_guests_scripts = \ test-v2v-conversion-of-centos-6.sh \ test-v2v-conversion-of-centos-7.0.sh \ + test-v2v-conversion-of-debian-6.sh \ + test-v2v-conversion-of-debian-7.sh \ + test-v2v-conversion-of-debian-8.sh \ test-v2v-conversion-of-fedora-20.sh \ test-v2v-conversion-of-fedora-23.sh \ test-v2v-conversion-of-rhel-5.10.sh \ test-v2v-conversion-of-rhel-6.8.sh \ test-v2v-conversion-of-rhel-7.0.sh \ - test-v2v-conversion-of-rhel-7.2.sh + test-v2v-conversion-of-rhel-7.2.sh \ + test-v2v-conversion-of-ubuntu-10.04.sh \ + test-v2v-conversion-of-ubuntu-12.04.sh \ + test-v2v-conversion-of-ubuntu-14.04.sh \ + test-v2v-conversion-of-ubuntu-16.04.sh test-v2v-conversion-of-%.sh: rm -f $@ $@-t -- 2.10.0

8 years, 2 months

3
2
0 / 0

[PATCH v5 0/2] Improve OVA manifest parsing

by Tomáš Golembiovský

This series fixes and enhances parsing of the OVA manifest file. The changes are: - Added mandatory space to the regexp - Process all lines in the file, not just one - Warn on improperly formated lines - Support SHA256 hashes v4 -> v5: - fix tests - change one test to include the SHA256 checksum Tomáš Golembiovský (2): v2v: ova: fix checking of the manifest file v2v: ova: support SHA256 hashes in manifest test-data/guestfs-hashsums.sh | 13 +++++++++++++ v2v/input_ova.ml | 18 ++++++++++++------ v2v/test-v2v-i-ova-formats.sh | 2 +- v2v/test-v2v-i-ova-gz.sh | 2 +- v2v/test-v2v-i-ova-subfolders.sh | 2 +- v2v/test-v2v-i-ova-two-disks.sh | 4 ++-- v2v/test-v2v-i-ova.sh | 4 ++-- 7 files changed, 32 insertions(+), 13 deletions(-) -- 2.10.0

8 years, 2 months

2
3
0 / 0

[PATCH] appliance: add/remove some packages for Arch Linux

by Tomáš Golembiovský

Added: - cdrtools: added as alternative to cdrkit - multipath-tools: contains kpartx (in AUR) Removed: - ntfsprogs: the package is no longer available, it has been completely replaced by ntfs-3g (already in packagelist.in) - zfs-fuse: no longer in AUR Signed-off-by: Tomáš Golembiovský <tgolembi(a)redhat.com> --- appliance/packagelist.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/appliance/packagelist.in b/appliance/packagelist.in index 77bd464..f278f66 100644 --- a/appliance/packagelist.in +++ b/appliance/packagelist.in @@ -102,6 +102,7 @@ dnl iproute has been renamed to iproute2 ifelse(ARCHLINUX,1, augeas cdrkit + cdrtools cryptsetup dhcpcd gptfdisk @@ -115,8 +116,8 @@ ifelse(ARCHLINUX,1, dnl syslinux has mtools as optional dependency, but in reality it's dnl a hard one: mtools + multipath-tools dnl for kpartx nilfs-utils - ntfsprogs ntfs-3g pcre reiserfsprogs @@ -124,7 +125,6 @@ ifelse(ARCHLINUX,1, vim xz yajl - zfs-fuse ) ifelse(SUSE,1, -- 2.10.0

8 years, 2 months

2
1
0 / 0

libvirt-v2v error

by Saman Bandara

Dear sir, I'm getting following error while trying to convert a VMWare RHEL6 server to kvm. Please give any suggestion to resolve this. [root@kvm16 ~]# virt-v2v ic esx://10.16.32.12/?no_verify=1 -o rhev -os 10.16.32.16:/vm-images/export_domain --network rhevm "10.16.32.36-db- slcloudcontrol" virt-v2v: Failed to connect to qemu:///system: libvirt error code: 45, message: authentication failed: Failed to step SASL negotiation: -7 (SASL(-7): invalid parameter supplied: Unexpectedly missing a prompt result) -- *Saman K. Bandara,** Database Administrator* *ShipXpres Technologies (Pvt) Ltd.* 2300 Marsh Point Road, Suite 101 || Neptune Beach, FL 32266 Phone: +94 71 8135485 <%2B94%20718135485> | +94 <%2B94%20777522730>76 6014001 *Company Website <http://www.shipxpress.com/>* || *LinkedIn <http://www.linkedin.com/company/shipxpress> *|| *Facebook <https://www.facebook.com/ShipXpressInc>* || *Twitter <https://twitter.com/ShipXpressInc>*

8 years, 2 months

3
7
0 / 0

[PATCH v4 0/2] Improve OVA manifest parsing

by Tomáš Golembiovský

This series fixes and enhances parsing of the OVA manifest file. The changes are: - Added mandatory space to the regexp - Process all lines in the file, not just one - Warn on improperly formated lines - Support SHA256 hashes v1 -> v2: rebased on to master to make use of the Checksums module v2 -> v3: - changed debug/warning messages in first patch according to Richard's suggestions v3 -> v4: - remove unneeded String.replace and the stray argument to warning call Tomáš Golembiovský (2): v2v: ova: fix checking of the manifest file v2v: ova: support SHA256 hashes in manifest v2v/input_ova.ml | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) -- 2.10.0

8 years, 2 months

3
4
0 / 0

[PATCH v3 0/2] Improve OVA manifest parsing

by Tomáš Golembiovský

This series fixes and enhances parsing of the OVA manifest file. The changes are: - Added mandatory space to the regexp - Process all lines in the file, not just one - Warn on improperly formated lines - Support SHA256 hashes v1 -> v2: rebased on to master to make use of the Checksums module v2 -> v3: - changed debug/warning messages in first patch according to Richard's suggestions Tomáš Golembiovský (2): v2v: ova: fix checking of the manifest file v2v: ova: support SHA256 hashes in manifest v2v/input_ova.ml | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) -- 2.10.0

8 years, 2 months

2
4
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

Libguestfs October 2016