March 2015 - Libguestfs - Libguestfs List Archives

by Richard W.M. Jones

[ I realized that we were discussing adding this feature, in various private email, IRC, and this long bugzilla thread: https://bugzilla.redhat.com/show_bug.cgi?id=1060423 That's not how we should do things. Let's discuss it on the mailing list. ] One thing that virt-customize/virt-sysprep/virt-builder have to do is relabel SELinux guests. What we do at the moment is run: if load_policy && fixfiles restore; then rm -f /.autorelabel else touch /.autorelabel echo '%s: SELinux relabelling failed, will relabel at boot instead.' fi while chrooted into the guest (using the 'guestfs_sh' API). This has a number of problems: - It has to load the policy using 'load_policy', but this doesn't work sometimes: * RHEL 5 load_policy takes a parameter. * Doesn't work if appliance kernel is significantly different from guest kernel version, because the binary policy format changes irregularly and is not backwards compatible. * Requires the appliance [host] kernel to be compiled with LSM/SELinux support. - Touching /.autorelabel is often broken, eg. it's broken in Fedora 20 because of systemd (RHBZ#1049656). - /etc/resolv.conf will not be relabelled if guestfs network is on, because of resolv.conf shenanigans in libguestfs.git/daemon/command.c - It requires running guest code, which we'd like to avoid. What would be nice would be to have an API to just do this relabelling. Libguestfs could change this API as required to handle different guests. Dan Walsh helpfully pointed out to us that we've been doing it wrong all along :-) A much better way to relabel is to run: setfiles /etc/selinux/targeted/contexts/files/file_contexts DIR where 'file_contexts' is a file which contains the default labels for files (a set of regexps), and 'DIR' is the directory at which relabelling starts. Note that 'setfiles' would be the libguestfs appliance binary, so no guest binary needs to be run. A simple API could just look like this: guestfs_selinux_relabel (g); which would always use the 'targeted' policy from the guest, and always start relabelling at the root. This would work fine for virt-builder. For Colin's requirements for Project Atomic, I suspect he will want to be able to set the file_contexts file and the root directory, but I'll leave him to describe what would be useful. A couple of notes: - I'd like to avoid baking in assumptions from the 'setfiles' command as far as possible. libguestfs APIs last for many years and some have caused us many years of regret (but that's our job) :-/ - Is it a good idea to tie this into inspection in some way -- for example, inspection could provide us with the path to the current or default SELinux policy. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-top is 'top' for virtual machines. Tiny program with many powerful monitoring features, net stats, disk stats, logging, etc. http://people.redhat.com/~rjones/virt-top

9 years

5
10
0 / 0

missing btrfs subvol support

by Olaf Hering

Is btrfs subvol support failing just for me? Looks like nothing adds the required '@/' string. virt-ls uses the first variant of the command: ><rescue> mount -vo subvol=var/spool,ro /dev/sda2 /sysroot/ [ 113.852047] BTRFS info (device sda2): disk space caching is enabled [ 113.852869] BTRFS: has skinny extents mount: mount(2) failed: No such file or directory ><rescue> mount -vo subvol=@var/spool,ro /dev/sda2 /sysroot/ [ 116.082642] BTRFS info (device sda2): disk space caching is enabled [ 116.083476] BTRFS: has skinny extents mount: mount(2) failed: No such file or directory ><rescue> mount -vo subvol=@/var/spool,ro /dev/sda2 /sysroot/ [ 123.995343] BTRFS info (device sda2): disk space caching is enabled [ 123.996238] BTRFS: has skinny extents mount: /dev/sda2 mounted on /sysroot. ><rescue> exit fstab is: UUID=d538a81f-9778-424d-96cc-e48dd2d4a323 swap swap defaults 0 0 UUID=65b72f12-eccb-4cf2-a4f4-9c4bb462456f / btrfs defaults 0 0 UUID=65b72f12-eccb-4cf2-a4f4-9c4bb462456f /var/spool btrfs subvol=@/var/spool 0 0 Olaf

9 years, 3 months

4
10
0 / 0

[libguestfs] conversion issue on NFS shares

by Artur Krzywdzinski

Hi T'm trying to convert XEN virtual machine image into raw. Source file is on NFS export and destination is also on nfs export. (both exports are mounted on migration servers RW access). I'm getting permission denied. I have RW access to both exports - I can create, delete objects on both exports from migration server. But when I copy img file onto migration server local filesystem, conversion works, from local fs to nfs export. However when I tried to run guestfish against file located on NFS - I'm getting the same erro - Permission denied . [root@kvm01 export]# virt-v2v -i disk migr01.img -o local -os /tmp [ 0.0] Opening the source -i disk migr01.img [ 0.0] Creating an overlay to protect the source from being modified [ 0.0] Opening the overlay virt-v2v: error: libguestfs error: could not create appliance through libvirt. Try running qemu directly without libvirt using this environment variable: export LIBGUESTFS_BACKEND=direct Original error from libvirt: internal error: process exited while connecting to monitor: 2014-10-16T14:25:13.729270Z qemu-kvm: -drive file=/var/tmp/v2vovl60e1a0.qcow2,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=unsafe,discard=unmap: could not open disk image /var/tmp/v2vovl60e1a0.qcow2: Could not open backing file: Could not open '/mnt/xen01/export/migr01.img': Permission denied [code=1 domain=10] If reporting bugs, run virt-v2v with debugging enabled and include the complete output: virt-v2v -v -x [...] [root@kvm01 export]# -- Artur Krzywdzinski

9 years, 7 months

2
2
0 / 0

Would this be considered a ubuntu or libguestfs issue?

by Lee Revell

virt-builder on a ubuntu guest when passed --update fails with "Unable to connect to Upstart": https://www.nesono.com/node/368 Lee

9 years, 8 months

2
6
0 / 0

[PATCH] WIP: New virt-dib tool

by Pino Toscano

virt-dib is a new tool to run the elements of diskimage-builder using libguestfs. --- Work in progress (debug stuff here and there), although I've submitting it for initial review, for being included later when polished for good. TODO items open: - move Uname from builder to mllib - improve the documentation - review - getting more testing (although it has been successfully tested for a while, not only by myself) - polish .gitignore | 6 + Makefile.am | 1 + appliance/packagelist.in | 4 + configure.ac | 3 + dib/Makefile.am | 148 ++++++++ dib/cmdline.ml | 247 +++++++++++++ dib/dib.ml | 930 +++++++++++++++++++++++++++++++++++++++++++++++ dib/elements.ml | 219 +++++++++++ dib/link.sh.in | 22 ++ dib/uname-c.c | 57 +++ dib/uname.ml | 27 ++ dib/uname.mli | 28 ++ dib/utils.ml | 148 ++++++++ dib/virt-dib.pod | 541 +++++++++++++++++++++++++++ po-docs/podfiles | 1 + run.in | 1 + 16 files changed, 2383 insertions(+) create mode 100644 dib/Makefile.am create mode 100644 dib/cmdline.ml create mode 100644 dib/dib.ml create mode 100644 dib/elements.ml create mode 100644 dib/link.sh.in create mode 100644 dib/uname-c.c create mode 100644 dib/uname.ml create mode 100644 dib/uname.mli create mode 100644 dib/utils.ml create mode 100644 dib/virt-dib.pod diff --git a/.gitignore b/.gitignore index 9c329a0..27aae29 100644 --- a/.gitignore +++ b/.gitignore @@ -120,6 +120,11 @@ Makefile.in /df/stamp-virt-df.pod /df/virt-df /df/virt-df.1 +/dib/.depend +/dib/link.sh +/dib/stamp-virt-dib.pod +/dib/virt-dib +/dib/virt-dib.1 /diff/stamp-virt-diff.pod /diff/virt-diff /diff/virt-diff.1 @@ -243,6 +248,7 @@ Makefile.in /html/virt-copy-out.1.html /html/virt-customize.1.html /html/virt-df.1.html +/html/virt-dib.1.html /html/virt-diff.1.html /html/virt-edit.1.html /html/virt-filesystems.1.html diff --git a/Makefile.am b/Makefile.am index 580404a..c02d714 100644 --- a/Makefile.am +++ b/Makefile.am @@ -133,6 +133,7 @@ SUBDIRS += \ mllib \ customize \ builder builder/website \ + dib \ resize \ sparsify \ sysprep \ diff --git a/appliance/packagelist.in b/appliance/packagelist.in index 76c7293..2f6878e 100644 --- a/appliance/packagelist.in +++ b/appliance/packagelist.in @@ -257,3 +257,7 @@ ifelse(VALGRIND_DAEMON,1,valgrind) dnl Define this by doing: ./configure --with-extra-packages="..." EXTRA_PACKAGES +curl +qemu-img +debootstrap +apt diff --git a/configure.ac b/configure.ac index d4137f6..1f6d21c 100644 --- a/configure.ac +++ b/configure.ac @@ -1703,6 +1703,8 @@ AC_CONFIG_FILES([builder/link.sh], [chmod +x,-w builder/link.sh]) AC_CONFIG_FILES([customize/link.sh], [chmod +x,-w customize/link.sh]) +AC_CONFIG_FILES([dib/link.sh], + [chmod +x,-w dib/link.sh]) AC_CONFIG_FILES([inspector/test-xmllint.sh], [chmod +x,-w inspector/test-xmllint.sh]) AC_CONFIG_FILES([mllib/link.sh], @@ -1742,6 +1744,7 @@ AC_CONFIG_FILES([Makefile customize/Makefile daemon/Makefile df/Makefile + dib/Makefile diff/Makefile edit/Makefile erlang/Makefile diff --git a/dib/Makefile.am b/dib/Makefile.am new file mode 100644 index 0000000..b472a67 --- /dev/null +++ b/dib/Makefile.am @@ -0,0 +1,148 @@ +# libguestfs virt-dib tool +# Copyright (C) 2015 Red Hat Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +include $(top_srcdir)/subdir-rules.mk + +AM_YFLAGS = -d + +EXTRA_DIST = \ + $(SOURCES_MLI) $(SOURCES_ML) $(SOURCES_C) \ + virt-dib.pod + +CLEANFILES = *~ *.annot *.cmi *.cmo *.cmx *.cmxa *.o virt-dib + +SOURCES_MLI = \ + uname.mli \ + utils.mli + +SOURCES_ML = \ + uname.ml \ + utils.ml \ + cmdline.ml \ + elements.ml \ + dib.ml + +SOURCES_C = \ + $(top_srcdir)/mllib/mkdtemp-c.c \ + uname-c.c + +bin_PROGRAMS = + +if HAVE_OCAML + +bin_PROGRAMS += virt-dib + +virt_dib_SOURCES = $(SOURCES_C) +virt_dib_CPPFLAGS = \ + -I. \ + -I$(top_builddir) \ + -I$(top_srcdir)/gnulib/lib -I$(top_builddir)/gnulib/lib \ + -I$(shell $(OCAMLC) -where) \ + -I$(top_srcdir)/gnulib/lib \ + -I$(top_srcdir)/src \ + -I$(top_srcdir)/fish +virt_dib_CFLAGS = \ + -pthread \ + $(WARN_CFLAGS) $(WERROR_CFLAGS) \ + -Wno-unused-macros + +BOBJECTS = \ + $(top_builddir)/mllib/libdir.cmo \ + $(top_builddir)/mllib/config.cmo \ + $(top_builddir)/mllib/common_gettext.cmo \ + $(top_builddir)/mllib/common_utils.cmo \ + $(top_builddir)/mllib/mkdtemp.cmo \ + $(SOURCES_ML:.ml=.cmo) +XOBJECTS = $(BOBJECTS:.cmo=.cmx) + +# -I $(top_builddir)/src/.libs is a hack which forces corresponding -L +# option to be passed to gcc, so we don't try linking against an +# installed copy of libguestfs. +OCAMLPACKAGES = \ + -package str,unix \ + -I $(top_builddir)/src/.libs \ + -I $(top_builddir)/gnulib/lib/.libs \ + -I $(top_builddir)/ocaml \ + -I $(top_builddir)/mllib +if HAVE_OCAML_PKG_GETTEXT +OCAMLPACKAGES += -package gettext-stub +endif + +OCAMLFLAGS = $(OCAML_FLAGS) $(OCAML_WARN_ERROR) + +if !HAVE_OCAMLOPT +OBJECTS = $(BOBJECTS) +BEST = c +OCAMLLINKFLAGS = mlguestfs.cma -custom +else +OBJECTS = $(XOBJECTS) +BEST = opt +OCAMLLINKFLAGS = mlguestfs.cmxa +endif + +virt_dib_DEPENDENCIES = $(OBJECTS) +virt_dib_LINK = \ + ./link.sh \ + $(OCAMLFIND) $(BEST) $(OCAMLFLAGS) $(OCAMLPACKAGES) $(OCAMLLINKFLAGS) \ + $(OBJECTS) -o $@ + +.mli.cmi: + $(OCAMLFIND) ocamlc $(OCAMLFLAGS) $(OCAMLPACKAGES) -c $< -o $@ +.ml.cmo: + $(OCAMLFIND) ocamlc $(OCAMLFLAGS) $(OCAMLPACKAGES) -c $< -o $@ +if HAVE_OCAMLOPT +.ml.cmx: + $(OCAMLFIND) ocamlopt $(OCAMLFLAGS) $(OCAMLPACKAGES) -c $< -o $@ +endif + +# Manual pages and HTML files for the website. + +man_MANS = virt-dib.1 + +noinst_DATA = $(top_builddir)/html/virt-dib.1.html + +virt-dib.1 $(top_builddir)/html/virt-dib.1.html: stamp-virt-dib.pod + +stamp-virt-dib.pod: virt-dib.pod + $(PODWRAPPER) \ + --man virt-dib.1 \ + --html $(top_builddir)/html/virt-dib.1.html \ + --license GPLv2+ \ + $< + touch $@ + +CLEANFILES += stamp-virt-dib.pod + +# Dependencies. +depend: .depend + +.depend: $(wildcard $(abs_srcdir)/*.mli) $(wildcard $(abs_srcdir)/*.ml) + rm -f $@ $@-t + $(OCAMLFIND) ocamldep -I ../ocaml -I $(abs_srcdir) -I $(abs_top_builddir)/mllib $^ | \ + $(SED) 's/ *$$//' | \ + $(SED) -e :a -e '/ *\\$$/N; s/ *\\\n */ /; ta' | \ + $(SED) -e 's,$(abs_srcdir)/,$(builddir)/,g' | \ + sort > $@-t + mv $@-t $@ + +-include .depend + +endif + +DISTCLEANFILES = .depend + +.PHONY: depend docs diff --git a/dib/cmdline.ml b/dib/cmdline.ml new file mode 100644 index 0000000..9563260 --- /dev/null +++ b/dib/cmdline.ml @@ -0,0 +1,247 @@ +(* virt-dib + * Copyright (C) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +(* Command line argument parsing. *) + +open Common_gettext.Gettext +open Common_utils + +open Utils + +open Printf + +let parse_args ~prog = + let display_version () = + printf "%s %s\n" prog Config.package_version; + exit 0 + in + + let usage_msg = + sprintf (f_"\ +%s: run diskimage-builder elements to generate images + + virt-dib -B DIB-LIB -p ELEMENTS-PATH elements... + +A short summary of the options is given below. For detailed help please +read the man page virt-dib(1). +") + prog in + + let elements = ref [] in + let append_element element = + elements := element :: !elements in + + let excluded_elements = ref [] in + let append_excluded_element element = + excluded_elements := element :: !excluded_elements in + + let element_paths = ref [] in + let append_element_path arg = + element_paths := arg :: !element_paths in + + let blacklist = ref [] in + let append_blacklisted_script arg = + blacklist := arg :: !blacklist in + + let trace = ref false in + let verbose = ref false in + let debug = ref 0 in + let set_debug arg = + debug := arg in + + let dryrun = ref false in + + let basepath = ref "" in + + let image_name = ref "image" in + + let fs_type = ref "ext4" in + + let size = ref (unit_GB 5) in + let set_size arg = size := parse_size ~prog arg in + + let memsize = ref None in + let set_memsize arg = memsize := Some arg in + + let network = ref true in + + let smp = ref None in + let set_smp arg = smp := Some arg in + + let formats = ref ["qcow2"] in + let set_format arg = + let fmts = string_nsplit "," arg in + let fmts = remove_dups fmts in + List.iter ( + function + | "qcow2" | "tar" | "raw" -> () + | fmt -> + error (f_"invalid format '%s' in --formats") fmt + ) fmts; + formats := fmts in + + let envvars = ref [] in + let append_envvar arg = + envvars := arg :: !envvars in + + let use_base = ref true in + + let arch = ref "" in + + let drive = ref None in + let set_drive arg = drive := Some arg in + + let root_label = ref None in + let set_root_label arg = root_label := Some arg in + + let install_type = ref "source" in + + let image_cache = ref None in + let set_image_cache arg = image_cache := Some arg in + + let compressed = ref true in + + let delete_on_failure = ref true in + + let is_ramdisk = ref false in + let ramdisk_element = ref "ramdisk" in + + let qemu_img_options = ref None in + let set_qemu_img_options arg = qemu_img_options := Some arg in + + let machine_readable = ref false in + + let extra_packages = ref [] in + let append_extra_packages arg = + extra_packages := List.rev (string_nsplit "," arg) @ !extra_packages in + + let argspec = [ + "--short-options", Arg.Unit display_short_options, " " ^ s_"List short options"; + "--long-options", Arg.Unit display_long_options, " " ^ s_"List long options"; + + "-p", Arg.String append_element_path, "path" ^ " " ^ s_"Add new a elements location"; + "--element-path", Arg.String append_element_path, "path" ^ " " ^ s_"Add new a elements location"; + "--exclude-element", Arg.String append_excluded_element, + "element" ^ " " ^ s_"Exclude the specified element"; + "--blacklist", Arg.String append_blacklisted_script, + "script" ^ " " ^ s_"Blacklist (ignore) this script"; + "--envvar", Arg.String append_envvar, "envvar[=value]" ^ " " ^ s_"Carry/set this environment variable"; + "-n", Arg.Clear use_base, " " ^ s_"Skip the inclusion of the 'base' element"; + "--root-label", Arg.String set_root_label, "label" ^ " " ^ s_"Label for the root fs"; + "--install-type", Arg.Set_string install_type, "type" ^ " " ^ s_"Installation type"; + "--image-cache", Arg.String set_image_cache, "directory" ^ " " ^ s_"Location for cached images"; + "-u", Arg.Clear compressed, " " ^ "Do not compress the qcow2 image"; + "--qemu-img-options", Arg.String set_qemu_img_options, + "option" ^ " " ^ s_"Add qemu-img options"; + "--extra-packages", Arg.String append_extra_packages, + "pkg,..." ^ " " ^ s_"Add extra packages to install"; + + "--ramdisk", Arg.Set is_ramdisk, " " ^ "Switch to a ramdisk build"; + "--ramdisk-element", Arg.Set_string ramdisk_element, "name" ^ " " ^ s_"Main element for building ramdisks"; + + "--name", Arg.Set_string image_name, "name" ^ " " ^ s_"Name of the image"; + "--fs-type", Arg.Set_string fs_type, "fs" ^ " " ^ s_"Filesystem for the image"; + "--size", Arg.String set_size, "size" ^ " " ^ s_"Set output disk size"; + "--formats", Arg.String set_format, "qcow2,tgz,..." ^ " " ^ s_"Output formats"; + "--arch", Arg.Set_string arch, "arch" ^ " " ^ s_"Output architecture"; + "--drive", Arg.String set_drive, "path" ^ " " ^ s_"Optional drive for caches"; + + "-m", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size"; + "--memsize", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size"; + "--network", Arg.Set network, " " ^ s_"Enable appliance network (default)"; + "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network"; + "--smp", Arg.Int set_smp, "vcpus" ^ " " ^ s_"Set number of vCPUs"; + "--no-delete-on-failure", Arg.Clear delete_on_failure, + " " ^ s_"Don't delete output file on failure"; + "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable"; + + "-V", Arg.Unit display_version, " " ^ s_"Display version and exit"; + "--version", Arg.Unit display_version, " " ^ s_"Display version and exit"; + "-v", Arg.Set verbose, " " ^ s_"Enable libguestfs debugging messages"; + "--verbose", Arg.Set verbose, " " ^ s_"Enable libguestfs debugging messages"; + "-x", Arg.Set trace, " " ^ s_"Enable tracing of libguestfs calls"; + "--debug", Arg.Int set_debug, "level" ^ " " ^ s_"Set debug level"; + "-d", Arg.Set dryrun, " " ^ s_"Set the dry-run mode"; + "-B", Arg.Set_string basepath, "path" ^ " " ^ s_"Base path of diskimage-builder library"; + ] in + + let argspec = + let cmp (arg1, _, _) (arg2, _, _) = + let arg1 = skip_dashes arg1 and arg2 = skip_dashes arg2 in + compare (String.lowercase arg1) (String.lowercase arg2) + in + List.sort cmp argspec in + let argspec = Arg.align argspec in + long_options := argspec; + + Arg.parse argspec append_element usage_msg; + + let verbose = !verbose in + let trace = !trace in + let debug = !debug in + let dryrun = !dryrun in + let basepath = !basepath in + let elements = List.rev !elements in + let excluded_elements = List.rev !excluded_elements in + let element_paths = List.rev !element_paths in + let blacklist = List.rev !blacklist in + let image_name = !image_name in + let fs_type = !fs_type in + let size = !size in + let memsize = !memsize in + let network = !network in + let smp = !smp in + let formats = !formats in + let envvars = !envvars in + let use_base = !use_base in + let arch = !arch in + let drive = !drive in + let root_label = !root_label in + let install_type = !install_type in + let image_cache = !image_cache in + let compressed = !compressed in + let delete_on_failure = !delete_on_failure in + let is_ramdisk = !is_ramdisk in + let ramdisk_element = !ramdisk_element in + let qemu_img_options = !qemu_img_options in + let machine_readable = !machine_readable in + let extra_packages = List.rev !extra_packages in + + (* No elements and machine-readable mode? Print some facts. *) + if elements = [] && machine_readable then ( + printf "virt-dib\n"; + printf "output:qcow2\n"; + printf "output:tar\n"; + printf "output:raw\n"; + exit 0 + ); + + if basepath = "" then + error (f_"-B must be specified"); + + if formats = [] then + error (f_"the list of output formats cannot be empty"); + + if elements = [] then + error (f_"at least one distribution root element must be specified"); + + verbose, trace, debug, dryrun, basepath, elements, excluded_elements, element_paths, + blacklist, use_base, drive, + image_name, fs_type, size, root_label, install_type, image_cache, compressed, + qemu_img_options, is_ramdisk, ramdisk_element, extra_packages, + memsize, network, smp, delete_on_failure, formats, arch, envvars diff --git a/dib/dib.ml b/dib/dib.ml new file mode 100644 index 0000000..cf3fda6 --- /dev/null +++ b/dib/dib.ml @@ -0,0 +1,930 @@ +(* virt-dib + * Copyright (C) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +open Common_gettext.Gettext +open Common_utils + +open Cmdline +open Utils +open Elements + +open Printf +open Unix + +module G = Guestfs + +let exclude_elements elements excluded_elements = + StringSet.filter (fun x -> List.mem x excluded_elements <> true) elements + +let read_envvars envvars = + filter_map ( + fun var -> + let len = String.length var in + let i = string_find var "=" in + if i = -1 then ( + try Some (var, Sys.getenv var) + with Not_found -> None + ) else ( + Some (String.sub var 0 i, String.sub var (i + 1) (len - i - 1)) + ) + ) envvars + +let read_dib_envvars () = + let vars = Array.to_list (environment ()) in + let vars = List.filter (fun x -> string_prefix x "DIB_") vars in + List.fold_left (fun acc x -> acc ^ x ^ "\n") "" vars + +let make_dib_args args = + let args = Array.to_list args in + let rec quote_args = function + | [] -> "" + | x :: xs -> sprintf " %s" (quote x) ^ quote_args xs + in + match args with + | [] -> "" + | app :: xs -> app ^ quote_args xs + +let write_script fn text = + let oc = open_out fn in + output_string oc text; + flush oc; + close_out oc; + chmod fn 0o755 + +let prepare_external ~dib_args ~dib_vars ~out_name ~root_label ~rootfs_uuid ~image_cache + ~arch ~network ~debug + destdir libdir hooksdir tmpdir fakebindir all_elements element_paths = + let network_string = if network then "" else "1" in + + let run_extra = sprintf "\ +#!/bin/bash +%s +target_dir=$1 +shift +script=$1 +shift + +export PATH=%s:$PATH + +# d-i-b variables +export TMP_MOUNT_PATH=%s +export DIB_OFFLINE=%s +export IMAGE_NAME=\"%s\" +export DIB_ROOT_LABEL=\"%s\" +export DIB_IMAGE_ROOT_FS_UUID=%s +export DIB_IMAGE_CACHE=\"%s\" +export _LIB=%s +export ARCH=%s +export TMP_HOOKS_PATH=%s +export DIB_ARGS=\"%s\" +export IMAGE_ELEMENT=\"%s\" +export ELEMENTS_PATH=\"%s\" +export DIB_ENV=%s +export TMPDIR=\"${TMP_MOUNT_PATH}/tmp\" +export TMP_DIR=\"${TMPDIR}\" +export DIB_DEBUG_TRACE=%d + +ENVIRONMENT_D_DIR=$target_dir/../environment.d + +if [ -d $ENVIRONMENT_D_DIR ] ; then + env_files=$(find $ENVIRONMENT_D_DIR -maxdepth 1 -xtype f | \ + grep -E \"/[0-9A-Za-z_\\.-]+$\" | \ + LANG=C sort -n) + for env_file in $env_files ; do + source $env_file + done +fi + +$target_dir/$script +" + (if debug >= 1 then "set -x\n" else "") + fakebindir + (quote tmpdir) + network_string + out_name + root_label + rootfs_uuid + image_cache + (quote libdir) + arch + (quote hooksdir) + dib_args + (String.concat " " (StringSet.elements all_elements)) + (String.concat ":" element_paths) + (quote dib_vars) + debug in + write_script (destdir // "run-part-extra.sh") run_extra; + + (* Needed as TMPDIR for the extra-data hooks *) + do_mkdir (tmpdir // "tmp") + +let prepare_aux ~envvars ~dib_args ~dib_vars ~log_file ~out_name ~rootfs_uuid ~arch ~network + ~root_label ~install_type ~debug ~extra_packages + destdir all_elements = + let envvars_string = List.map ( + fun (var, value) -> + sprintf "export %s=%s" var (quote value) + ) envvars in + let network_string = if network then "" else "1" in + + let script_run_part = sprintf "\ +#!/bin/bash +%s +sysroot=$1 +shift +mysysroot=$1 +shift +blockdev=$1 +shift +target_dir=$1 +shift +new_wd=$1 +shift +script=$1 +shift + +# user variables +%s + +# system variables +export HOME=$mysysroot/tmp/aux/perm/home +export PATH=$mysysroot/tmp/aux/hooks/bin:$PATH +export TMP=$mysysroot/tmp +export TMPDIR=$TMP +export TMP_DIR=$TMP + +# d-i-b variables +export TMP_MOUNT_PATH=$sysroot +export TARGET_ROOT=$sysroot +export DIB_OFFLINE=%s +export IMAGE_NAME=\"%s\" +export DIB_IMAGE_ROOT_FS_UUID=%s +export DIB_IMAGE_CACHE=$HOME/.cache/image-create +export DIB_ROOT_LABEL=\"%s\" +export _LIB=$mysysroot/tmp/aux/lib +export _PREFIX=$mysysroot/tmp/aux/elements +export ARCH=%s +export TMP_HOOKS_PATH=$mysysroot/tmp/aux/hooks +export DIB_ARGS=\"%s\" +export DIB_MANIFEST_SAVE_DIR=\"$mysysroot/tmp/aux/out/${IMAGE_NAME}.d\" +export IMAGE_BLOCK_DEVICE=$blockdev +export IMAGE_ELEMENT=\"%s\" +export DIB_ENV=%s +export DIB_DEBUG_TRACE=%d + +export TMP_BUILD_DIR=$mysysroot/tmp/aux +export TMP_IMAGE_DIR=$mysysroot/tmp/aux + +if [ -n \"$mysysroot\" ]; then + export PATH=$mysysroot/tmp/aux/fake-bin:$PATH +else + export PATH=$PATH:/usr/local/bin:/usr/local/sbin +fi + +ENVIRONMENT_D_DIR=$target_dir/../environment.d + +if [ -d $ENVIRONMENT_D_DIR ] ; then + env_files=$(find $ENVIRONMENT_D_DIR -maxdepth 1 -xtype f | \ + grep -E \"/[0-9A-Za-z_\\.-]+$\" | \ + LANG=C sort -n) + for env_file in $env_files ; do + source $env_file + done +fi + +if [ -n \"$new_wd\" ]; then + cd \"$mysysroot/$new_wd\" +fi + +$target_dir/$script +" + (if debug >= 1 then "set -x\n" else "") + (String.concat "\n" envvars_string) + network_string + out_name + rootfs_uuid + root_label + arch + dib_args + (String.concat " " (StringSet.elements all_elements)) + (quote dib_vars) + debug in + write_script (destdir // "run-part.sh") script_run_part; + let script_run_and_log = "\ +#!/bin/bash +logfile=$1 +shift +exec 3>&1 +exit `( ( ( $(dirname $0)/run-part.sh \"$@\" ) 2>&1 3>&-; echo $? >&4) | tee -a $logfile >&3 >&2) 4>&1` +" in + write_script (destdir // "run-and-log.sh") script_run_and_log; + + (* Create the fake sudo support. *) + do_mkdir (destdir // "fake-bin"); + let fake_sudo = "\ +#!/bin/bash + +SCRIPTNAME=fake-sudo + +ARGS_SHORT=\"EHiu:\" +ARGS_LONG=\"\" +TEMP=`POSIXLY_CORRECT=1 getopt ${ARGS_SHORT:+-o $ARGS_SHORT} ${ARGS_LONG:+--long $ARGS_LONG} \ + -n \"$SCRIPTNAME\" -- \"$@\"` +if [ $? != 0 ]; then echo \"Terminating...\" >&2 ; exit 1 ; fi +eval set -- \"$TEMP\" + +preserve_env= +set_home= +login_shell= +user= + +while true; do + case \"$1\" in + -E) preserve_env=1; shift;; + -H) set_home=1; shift;; + -i) login_shell=1; shift;; + -u) user=$2; shift 2;; + --) shift; break;; + *) echo \"Internal error!\"; exit 1;; + esac +done + +if [ -n \"$user\" ]; then + if [ $user != root -a $user != `whoami` ]; then + echo \"$SCRIPTNAME: cannot use the sudo user $user, only root and $(whoami) handled\" >&2 + exit 1 + fi +fi + +if [ -z \"$preserve_env\" ]; then + for envvar in `env | cut -d= -f1`; do + case \"$envvar\" in + PATH | USER | USERNAME | HOSTNAME | TERM | LANG | HOME | SHELL | LOGNAME ) ;; + *) unset $envvar ;; + esac + done +fi + +cmd=$1 +shift +$cmd \"$@\" +" in + write_script (destdir // "fake-bin" // "sudo") fake_sudo; + (* Pick dib-run-parts from the host, if available, otherwise put + * a fake executable which will error out if used. + *) + if check_tool ~param:"--list ." "dib-run-parts" then ( + let lines = external_command ~prog (sprintf "which dib-run-parts") in + let lines = List.filter (fun x -> x <> "") lines in + let loc = + match lines with + | [] -> error (f_"empty output of `which dib-run-parts`") + | x :: _ -> x in + do_cp loc (destdir // "fake-bin") + ) else ( + let fake_dib_run_parts = "\ +#!/bin/sh +echo \"Please install dib-run-parts on the host\" +exit 1 +" in + write_script (destdir // "fake-bin" // "dib-run-parts") fake_dib_run_parts; + ); + + (* Write the custom hooks. *) + let script_install_type_env = sprintf "\ +export DIB_DEFAULT_INSTALLTYPE=\"%s\" +" + install_type in + write_script (destdir // "hooks" // "environment.d" // "11-dib-install-type.bash") script_install_type_env; + + (* Write install-packages.sh *) + let script_install_packages = sprintf "\ +#!/bin/bash +install-packages %s +" + (String.concat " " extra_packages) in + write_script (destdir // "install-packages.sh") script_install_packages; + + do_mkdir (destdir // "perm") + +let timing_output ~target_name entries timings = + let buf = Buffer.create 4096 in + Buffer.add_string buf "----------------------- PROFILING -----------------------\n"; + Buffer.add_char buf '\n'; + bprintf buf "Target: %s\n" target_name; + Buffer.add_char buf '\n'; + bprintf buf "%-40s %9s\n" "Script" "Seconds"; + bprintf buf "%-40s %9s\n" "---------------------------------------" "----------"; + Buffer.add_char buf '\n'; + List.iter ( + fun x -> + bprintf buf "%-40s %10.3f\n" x (Hashtbl.find timings x); + ) entries; + Buffer.add_char buf '\n'; + Buffer.add_string buf "--------------------- END PROFILING ---------------------\n"; + Buffer.contents buf + +let is_string_valid str = + let is_char_valid = function + | 'A'..'Z' | 'a'..'z' | '0'..'9' | '_' | '-' -> true + | _ -> false in + let rec loop str i len = + if i = len then + true + else if not (is_char_valid str.[i]) then + false + else + loop str (i + 1) len in + loop str 0 (String.length str) + +type sysroot_type = + | In + | Out + | Subroot + +let timed_run fn = + let time_before = Unix.gettimeofday () in + fn (); + let time_after = Unix.gettimeofday () in + time_after -. time_before + +let run_parts ~debug ~dryrun ~sysroot ~blockdev ~log_file ?(new_wd = "") + (g : Guestfs.guestfs) hook_dir = + let msg fs = make_message_function ~quiet:false fs in (* XXX *) + let hook_name = Filename.basename hook_dir in + let entries = Array.to_list (g#ls hook_dir) in + let entries = List.filter (fun x -> is_string_valid x) entries in + let entries = List.filter ( + fun x -> + let fn = hook_dir ^ "/" ^ x in + ((g#stat fn).G.mode &^ 0o111_L > 0_L) && g#is_file ~followsymlinks:true fn + ) entries in + let entries = List.sort digit_prefix_compare entries in + let outbuf = Buffer.create 16384 in + if dryrun then ( + List.iter (fun x -> msg (f_"Would run: %s/%s") hook_name x) entries + ) else ( + let timings = Hashtbl.create 13 in + let new_wd = + match sysroot, new_wd with + | (Out|Subroot), "" -> "''" + | _, dir -> dir in + List.iter ( + fun x -> + msg (f_"Running: %s/%s") hook_name x; + g#write_append log_file (sprintf "Running %s/%s...\n" hook_name x); + let out = ref "" in + let run () = + let outstr = + match sysroot with + | In -> + g#sh (sprintf "/tmp/aux/run-and-log.sh '%s' '' '' '%s' '%s' '%s' '%s'" log_file blockdev hook_dir new_wd x) + | Out -> + g#debug "sh" [| "/sysroot/tmp/aux/run-and-log.sh"; "/sysroot" ^ log_file; "/sysroot"; "/sysroot"; blockdev; "/sysroot" ^ hook_dir; new_wd; x |] + | Subroot -> + g#debug "sh" [| "/sysroot/tmp/aux/run-and-log.sh"; "/sysroot" ^ log_file; "/sysroot/subroot"; "/sysroot"; blockdev; "/sysroot" ^ hook_dir; new_wd; x |] in + out := outstr; + Buffer.add_string outbuf outstr in + let delta_t = timed_run run in + Buffer.add_char outbuf '\n'; + out := ensure_trailing_newline !out; + printf "%s%!" !out; + if debug >= 1 then ( + printf "%s completed\n" x + ); + Hashtbl.add timings x delta_t; + ) entries; + g#write_append log_file (timing_output ~target_name:hook_name entries timings) + ); + flush_all (); + Buffer.contents outbuf + +let run_parts_host ~dryrun ~debug hook_dir run_script = + let msg fs = make_message_function ~quiet:false fs in (* XXX *) + let hook_name = Filename.basename hook_dir in + let entries = Array.to_list (Sys.readdir hook_dir) in + let entries = List.filter (fun x -> is_string_valid x) entries in + let entries = List.filter ( + fun x -> + try + let s = Unix.stat (hook_dir // x) in + s.Unix.st_kind = Unix.S_REG && s.Unix.st_perm land 0o111 > 0 + with Unix.Unix_error _ -> false + ) entries in + let entries = List.sort digit_prefix_compare entries in + if dryrun then ( + List.iter (fun x -> msg (f_"Would run: %s/%s") hook_name x) entries + ) else ( + let timings = Hashtbl.create 13 in + List.iter ( + fun x -> + msg (f_"Running: %s/%s") hook_name x; + let cmd = sprintf "%s %s %s" (quote run_script) (quote hook_dir) (quote x) in + let run () = + run_command ~tool:(Filename.basename run_script) cmd in + let delta_t = timed_run run in + if debug >= 1 then ( + printf "\n"; + printf "%s completed\n" x + ); + Hashtbl.add timings x delta_t; + + ) entries; + if debug >= 1 then ( + print_string (timing_output ~target_name:hook_name entries timings) + ) + ); + flush_all () + +let run_install_packages ~debug ~dryrun ~blockdev ~log_file + (g : Guestfs.guestfs) packages = + let msg fs = make_message_function ~quiet:false fs in (* XXX *) + let pkgs_string = String.concat " " packages in + let outbuf = Buffer.create 16384 in + if dryrun then ( + msg (f_"Would install: %s") pkgs_string + ) else ( + msg (f_"Installing: %s") pkgs_string; + g#write_append log_file (sprintf "Installing %s...\n" pkgs_string); + let out = g#sh (sprintf "/tmp/aux/run-and-log.sh '%s' '' '' '%s' '/tmp/aux' '' 'install-packages.sh'" log_file blockdev) in + Buffer.add_string outbuf out; + Buffer.add_char outbuf '\n'; + let out = ensure_trailing_newline out in + printf "%s%!" out; + if debug >= 1 then ( + printf "package installation completed\n"; + ); + ); + flush_all (); + Buffer.contents outbuf + +let main () = + let verbose, trace, debug, dryrun, basepath, elements, excluded_elements, element_paths, + blacklist, use_base, drive, + image_name, fs_type, size, root_label, install_type, image_cache, compressed, + qemu_img_options, is_ramdisk, ramdisk_element, extra_packages, + memsize, network, smp, delete_on_failure, formats, arch, envvars = + parse_args ~prog in + let msg fs = make_message_function ~quiet:false fs in (* XXX *) + + (* Check that the specified base directory of diskimage-builder + * has the "die" script in it, so we know the directory is the + * right one (hopefully so, at least). + *) + if not (Sys.file_exists (basepath // "die")) then + error (f_"the specified base path is not the diskimage-builder library"); + + require_tool "uuidgen"; + + let image_name_d = image_name ^ ".d" in + + let tmpdir = Mkdtemp.temp_dir "dib." "" in + rmdir_on_exit tmpdir; + let auxtmpdir = tmpdir // "aux" in + do_mkdir auxtmpdir; + let hookstmpdir = auxtmpdir // "hooks" in + do_mkdir hookstmpdir; + let extradatatmpdir = tmpdir // "extra-data" in + do_mkdir extradatatmpdir; + do_mkdir_p (auxtmpdir // "out" // image_name_d); + let elements = if use_base then ["base"] @ elements else elements in + let elements = if is_ramdisk then [ramdisk_element] @ elements else elements in + msg (f_"Elements: %s") (String.concat " " elements); + if debug >= 1 then ( + printf "tmpdir: %s\n" tmpdir; + printf "element paths: %s\n" (String.concat ":" element_paths); + ); + + let loaded_elements = load_elements ~debug element_paths in + if debug >= 1 then ( + printf "loaded elements:\n"; + Hashtbl.iter ( + fun k v -> + printf " %s => %s\n" k v.directory; + Hashtbl.iter ( + fun k v -> + printf "\t%-20s %s\n" k (String.concat " " (List.map (fun x -> Filename.basename x) v)) + ) v.hooks; + ) loaded_elements; + printf "\n"; + ); + let all_elements = load_dependencies elements element_paths in + let all_elements = exclude_elements all_elements + (excluded_elements @ builtin_elements_blacklist) in + + msg (f_"Expanded elements: %s") (String.concat " " (StringSet.elements all_elements)); + + let envvars = read_envvars envvars in + msg (f_"Carried environment variables: %s") (String.concat " " (List.map (fun (var, value) -> var) envvars)); + if debug >= 1 then ( + printf "carried over envvars:\n"; + if envvars <> [] then + List.iter ( + fun (var, value) -> + printf " %s=%s\n" var value + ) envvars + else + printf " (none)\n"; + printf "\n"; + ); + let dib_args = make_dib_args Sys.argv in + let dib_vars = read_dib_envvars () in + if debug >= 1 then ( + printf "DIB args:\n%s\n" dib_args; + printf "DIB envvars:\n%s\n" dib_vars + ); + + msg (f_"Preparing auxiliary data"); + + copy_elements all_elements loaded_elements + (blacklist @ builtin_scripts_blacklist) hookstmpdir; + + let log_file = "/tmp/aux/perm/" ^ (log_filename ~prog) in + + let arch = + match arch with + | "" -> current_arch () + | arch -> arch in + + let root_label = + match root_label with + | None -> + (* XFS has a limit of 12 characters for filesystem labels. + * Not changing the default for other filesystems to maintain + * backwards compatibility. + *) + (match fs_type with + | "xfs" -> "img-rootfs" + | _ -> "cloudimg-rootfs") + | Some label -> label in + + let image_cache = + match image_cache with + | None -> Sys.getenv "HOME" // ".cache" // "image-create" + | Some dir -> dir in + do_mkdir_p image_cache; + + let rootfs_uuid = uuidgen ~prog () in + + let formats_img, formats_archive = List.partition ( + function + | "qcow2" | "raw" -> true + | _ -> false + ) formats in + let formats_img_nonraw = List.filter (fun x -> x <> "raw") formats_img in + + prepare_aux ~envvars ~dib_args ~dib_vars ~log_file ~out_name:image_name ~rootfs_uuid + ~arch ~network ~root_label ~install_type ~debug ~extra_packages + auxtmpdir all_elements; + + let delete_output_file = ref delete_on_failure in + let delete_file () = + if !delete_output_file then ( + List.iter ( + fun fmt -> + try unlink (output_filename image_name fmt) with _ -> () + ) formats + ) + in + at_exit delete_file; + + prepare_external ~dib_args ~dib_vars ~out_name:image_name ~root_label ~rootfs_uuid + ~image_cache ~arch ~network ~debug + tmpdir basepath hookstmpdir extradatatmpdir (auxtmpdir // "fake-bin") + all_elements element_paths; + + let run_hook_host hook = + let hook_dir = hookstmpdir // (hook ^ ".d") in + if is_directory hook_dir then ( + if debug >= 1 then ( + printf "Running hooks for %s...\n%!" hook; + printf "run-parts %s\n%!" (quote hook_dir) + ); + run_parts_host ~dryrun ~debug hook_dir (tmpdir // "run-part-extra.sh") + ) + and run_hook ~blockdev ~sysroot ?(new_wd = "") + (g : Guestfs.guestfs) hook = + let hook_dir = sprintf "/tmp/aux/hooks/%s.d" hook in + if g#is_dir hook_dir then ( + if debug >= 1 then ( + printf "Running hooks for %s...\n%!" hook; + printf "run-parts %s\n%!" (quote hook_dir) + ); + run_parts ~debug ~dryrun ~sysroot ~blockdev ~log_file ~new_wd g hook_dir + ) else ( + "" + ) in + + run_hook_host "extra-data"; + + let copy_in (g : Guestfs.guestfs) srcdir destdir = + let desttar = Filename.temp_file ~temp_dir:tmpdir "virt-dib." ".tar.gz" in + let cmd = sprintf "tar czf %s -C %s --owner=root --group=root ." + (quote desttar) (quote srcdir) in + run_command cmd; + g#mkdir_p destdir; + g#tar_in ~compress:"gzip" desttar destdir; + Sys.remove desttar in + + let copy_preserve_in (g : Guestfs.guestfs) srcdir destdir = + let desttar = Filename.temp_file ~temp_dir:tmpdir "virt-dib." ".tar.gz" in + let remotetar = "/tmp/aux/" ^ (Filename.basename desttar) in + let cmd = sprintf "tar czf %s -C %s --owner=root --group=root ." + (quote desttar) (quote srcdir) in + run_command cmd; + g#upload desttar remotetar; + let verbose_flag = if debug > 0 then "v" else "" in + ignore (g#debug "sh" [| "tar"; "-C"; "/sysroot" ^ destdir; "--no-overwrite-dir"; "-x" ^ verbose_flag ^ "zf"; "/sysroot" ^ remotetar |]); + Sys.remove desttar; + g#rm remotetar in + + if debug >= 1 then + ignore (Sys.command (sprintf "tree -ps %s" (quote tmpdir))); + + msg (f_"Opening the disks"); + + let g, tmpdisk, tmpdiskfmt, drive_partition = + let g = new G.guestfs () in + if verbose then g#set_verbose true; + if trace then g#set_trace true; + + (match memsize with None -> () | Some memsize -> g#set_memsize memsize); + (match smp with None -> () | Some smp -> g#set_smp smp); + g#set_network network; + + (* Make sure to turn SELinux off to avoid awkward interactions + * between the appliance kernel and applications/libraries interacting + * with SELinux xattrs. + *) + g#set_selinux false; + + (* Main disk with the built image. *) + let fmt = "raw" in + let fn = + (* If "raw" is among the selected outputs, use it as main backing + * disk, otherwise create a temporary disk. + *) + if not is_ramdisk && not (StringSet.mem "ironic-agent" all_elements) && List.mem "raw" formats_img then image_name + else Filename.temp_file ~temp_dir:tmpdir "image." "" in + let fn = output_filename fn fmt in + (* Produce the output image. *) + g#disk_create fn fmt size; + g#add_drive ~readonly:false ~format:fmt fn; + + (* Helper drive for elements and binaries. *) + g#add_drive_scratch (unit_GB 5); + + (match drive with + | None -> + g#add_drive_scratch (unit_GB 5) + | Some drive -> + g#add_drive drive; + ); + + g#launch (); + + (* Prepare the /aux partition. *) + g#mkfs "ext2" "/dev/sdb"; + g#mount "/dev/sdb" "/"; + + copy_in g auxtmpdir "/"; + copy_in g basepath "/lib"; + g#umount "/"; + + (* Prepare the /aux/perm partition. *) + let drive_partition = + match drive with + | None -> + g#mkfs "ext2" "/dev/sdc"; + "/dev/sdc" + | Some _ -> + let partitions = Array.to_list (g#list_partitions ()) in + (match partitions with + | [] -> "/dev/sdc" + | partitions -> + let partitions = List.filter ( + fun x -> + string_prefix x "/dev/sdc" + ) partitions in + if partitions = [] then + error (f_"no partitions found in the helper drive"); + List.hd partitions + ) in + g#mount drive_partition "/"; + g#mkdir_p "/home/.cache/image-create"; + g#umount "/"; + + g, fn, fmt, drive_partition in + + let mount_aux () = + g#mkmountpoint "/tmp/aux"; + g#mount "/dev/sdb" "/tmp/aux"; + g#mount drive_partition "/tmp/aux/perm" in + + (* Small kludge: try to umount all first: if that fails, use lsof and fuser + * to find out what might have caused the failure, run udevadm to try + * to settle things down (udev, you never know), and try umount all again + *) + let checked_umount_all () = + try g#umount_all () + with G.Error _ -> + if debug >= 1 then ( + (try printf "lsof:\n%s\nEND\n" (g#debug "sh" [| "lsof"; "/sysroot"; |]) with _ -> ()); + (try printf "fuser:\n%s\nEND\n" (g#debug "sh" [| "fuser"; "-v"; "-m"; "/sysroot"; |]) with _ -> ()); + (try printf "losetup:\n%s\nEND\n" (g#debug "sh" [| "losetup"; "--list"; "--all" |]) with _ -> ()); + ); + ignore (g#debug "sh" [| "udevadm"; "--debug"; "settle" |]); + g#umount_all () + in + + g#mkmountpoint "/tmp"; + mount_aux (); + + let blockdev = + (* Setup a loopback device, just like d-i-b would tie an image in the host + * environment. + *) + let run_losetup device = + let lines = g#debug "sh" [| "losetup"; "--show"; "-f"; device |] in + let lines = string_nsplit "\n" lines in + let lines = List.filter (fun x -> x <> "") lines in + (match lines with + | [] -> device + | x :: _ -> x + ) in + let blockdev = run_losetup "/dev/sda" in + + let run_hook_out_eval hook envvar = + let lines = run_hook ~sysroot:Out ~blockdev g hook in + let lines = string_nsplit "\n" lines in + let lines = List.filter (fun x -> x <> "") lines in + if lines = [] then None + else (try Some (var_from_lines envvar lines) with _ -> None) in + + (match run_hook_out_eval "block-device" "IMAGE_BLOCK_DEVICE" with + | None -> blockdev + | Some x -> x + ) in + + let rec run_hook_out ?(new_wd = "") hook = + do_run_hooks_noout ~sysroot:Out ~new_wd hook + and run_hook_in hook = + do_run_hooks_noout ~sysroot:In hook + and run_hook_subroot hook = + do_run_hooks_noout ~sysroot:Subroot hook + and do_run_hooks_noout ~sysroot ?(new_wd = "") hook = + ignore (run_hook ~sysroot ~blockdev ~new_wd g hook) in + + g#sync (); + checked_umount_all (); + flush_all (); + + msg (f_"Setting up the destination root"); + + (* Create and mount the target filesystem. *) + let mkfs_options = [] in + let mkfs_options = + mkfs_options @ + (match fs_type with + | "ext4" -> + (* Very conservative to handle images being resized a lot + * Without -J option specified, default journal size will be set to 32M + * and online resize will be failed with error of needs too many credits. + *) + [ "-i"; "4096"; "-J"; "size=64" ] + | _ -> [] + ) in + let mkfs_options = mkfs_options @ [ "-t"; fs_type; blockdev ] in + ignore (g#debug "sh" (Array.of_list ([ "mkfs" ] @ mkfs_options))); + g#set_label blockdev root_label; + (match fs_type with + | x when string_prefix x "ext" -> g#set_uuid blockdev rootfs_uuid + | _ -> ()); + g#mount blockdev "/"; + g#mkmountpoint "/tmp"; + mount_aux (); + g#mkdir "/subroot"; + + run_hook_subroot "root"; + + g#sync (); + checked_umount_all (); + flush_all (); + + g#mount blockdev "/"; + g#rm_rf "/tmp"; + let subroot_items = + let l = Array.to_list (g#ls "/subroot") in + let l_lost_plus_found, l = List.partition (fun x -> x = "lost+found") l in + if l_lost_plus_found <> [] then ( + g#rm_rf "/subroot/lost+found"; + ); + l in + List.iter (fun x -> g#mv ("/subroot/" ^ x) ("/" ^ x)) subroot_items; + g#rmdir "/subroot"; + (* Check /tmp exists already. *) + ignore (g#is_dir "/tmp"); + mount_aux (); + g#ln_s "aux/hooks" "/tmp/in_target.d"; + + copy_preserve_in g extradatatmpdir "/"; + + run_hook_in "pre-install"; + + if extra_packages <> [] then + ignore (run_install_packages ~debug ~dryrun ~blockdev ~log_file g extra_packages); + + run_hook_in "install"; + + run_hook_in "post-install"; + + run_hook_in "finalise"; + + run_hook_out ~new_wd:("/tmp/aux/out/" ^ image_name_d) "cleanup"; + + g#sync (); + + if g#ls "/tmp/aux/out/" <> [||] then ( + msg (f_"Extracting data out of the image"); + do_mkdir image_name_d; + g#copy_out ("/tmp/aux/out/" ^ image_name_d) "."; + ); + + g#rm "/tmp/in_target.d"; + g#umount "/tmp/aux/perm"; + g#umount "/tmp/aux"; + g#rmdir "/tmp/aux"; + + flush_all (); + + List.iter ( + fun fmt -> + let fn = output_filename image_name fmt in + match fmt with + | "tar" -> + msg (f_"Compressing the image as tar"); + g#tar_out ~excludes:[| "./sys/*"; "./proc/*"; "./tmp/*"; |] + "/" fn + | _ as fmt -> error "unhandled format: %s" fmt + ) formats_archive; + + msg (f_"Umounting the disks"); + + (* Now that we've finished the build, don't delete the output file on + * exit. + *) + delete_output_file := false; + + g#sync (); + checked_umount_all (); + g#shutdown (); + g#close (); + + flush_all (); + + if not is_ramdisk && not (StringSet.mem "ironic-agent" all_elements) && formats_img_nonraw <> [] then ( + let can_compress = function + | "qcow2" -> true + | _ -> false in + let tmpdisk = quote tmpdisk in + List.iter ( + fun fmt -> + let fn = output_filename image_name fmt in + msg (f_"Converting to %s") fmt; + match fmt with + | "qcow2" -> + let cmd = + sprintf "qemu-img convert%s -f %s %s -O %s%s %s" + (if compressed && can_compress fmt then " -c" else "") + tmpdiskfmt + tmpdisk + fmt + (match qemu_img_options with + | None -> "" + | Some opt -> " -o " ^ quote opt) + (quote fn) in + if debug >= 1 then + printf "%s\n%!" cmd; + run_command cmd + | _ as fmt -> error "unhandled format: %s" fmt + ) formats_img_nonraw; + ); + + msg (f_"Done") + +let () = run_main_and_handle_errors ~prog main diff --git a/dib/elements.ml b/dib/elements.ml new file mode 100644 index 0000000..cae6c3c --- /dev/null +++ b/dib/elements.ml @@ -0,0 +1,219 @@ +(* virt-dib + * Copyright (C) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +(* Parsing and handling of elements. *) + +open Common_gettext.Gettext +open Common_utils + +open Utils + +open Printf + +module StringSet = Set.Make (String) + +type element = { + directory : string; + hooks : hooks_map; +} +and hooks_map = (string, string list) Hashtbl.t + +exception Duplicate_script of string * string (* hook, script *) + +(* These are the elements which we don't ever try to use. + *) +let builtin_elements_blacklist = [ +] + +(* These are the scripts which we don't ever try to run. + * Usual reason could be that they are not compatible the way virt-dib works + * (e.g. they expect the tree of elements outside the chroot, which is not + * available in the appliance. *) +let builtin_scripts_blacklist = [ + "01-sahara-version"; (* Gets the Git commit ID of the d-i-b and + * sahara-image-elements repositories. *) +] + +let stringset_of_list l = + List.fold_left (fun acc x -> StringSet.add x acc) StringSet.empty l + +let quote = Filename.quote + +let load_hooks ~debug path = +(* + if debug >= 2 then + printf "load_hooks %s\n" path; +*) + let hooks = Hashtbl.create 13 in + let entries = Sys.readdir path in + Array.iter ( + fun e -> +(* + if debug >= 2 then + printf "moo! %s\n" path; +*) + let p = path // e in + if is_directory p && (Filename.check_suffix e ".d") then ( + let listing = Sys.readdir p in + let hook = String.sub e 0 ((String.length e) - 2) in + Array.iter ( + fun script -> +(* + if debug >= 2 then + printf "%s, %s\n" path p; +*) + try + (match script.[0] with + | '0'..'9' -> + let d = p // script in + let l = try Hashtbl.find hooks hook with Not_found -> [] in + let l = d :: l in + Hashtbl.replace hooks hook l + | _ -> () + ) + with Invalid_argument _ -> () + ) listing + ) + ) entries; + hooks + +let load_elements ~debug paths = + let loaded_elements = Hashtbl.create 13 in + List.iter ( + fun path -> +(* printf "moo! %s\n" path; *) + if Sys.is_directory path then ( + let listing = Sys.readdir path in + Array.iter ( + fun p -> +(* printf "%s, %s\n" path p; *) + let dir = path // p in + if is_directory dir then ( + if not (Hashtbl.mem loaded_elements p) then ( + let elem = { directory = dir; hooks = load_hooks ~debug dir } in + Hashtbl.add loaded_elements p elem + ) else if debug >= 1 then ( + printf "element %s (in %s) already present" p path; + ) + ) + ) listing + ) + ) paths; + loaded_elements + +let load_dependencies elements element_paths = + let get filename element = + let rec loop = function + | [] -> + error (f_"element %s not found in %s") element (String.concat ":" element_paths) + | x :: tl -> +(* printf "@@@ element %s, path %s\n" element x; *) + if is_directory (x // element) then ( + let path = x // element // filename in + if Sys.file_exists path then ( + let lines = read_whole_file path in + let lines = string_nsplit "\n" lines in + let lines = List.filter (fun x -> x <> "") lines in + stringset_of_list lines + ) else + StringSet.empty + ) else + loop tl in + loop element_paths in + let get_deps = get "element-deps" in + let get_provides = get "element-provides" in + + let queue = Queue.create () in + let final = ref StringSet.empty in + let provided = ref StringSet.empty in + List.iter (fun x -> Queue.push x queue) elements; + final := stringset_of_list elements; + while not (Queue.is_empty queue) do + let elem = Queue.pop queue in +(* printf "@@ %s\n" elem; *) + if StringSet.mem elem !provided <> true then ( + let deps = get_deps elem in +(* printf ">> %s, deps: %s\n" elem (String.concat "," (StringSet.elements deps)); *) +(* printf ">> %s, prov: %s\n" elem (String.concat "," (StringSet.elements (get "element-provides" elem))); *) + provided := StringSet.union !provided (get_provides elem); + StringSet.iter (fun x -> Queue.push x queue) + (StringSet.diff deps (StringSet.union !final !provided)); + final := StringSet.union !final deps + ) + done; + let conflicts = StringSet.inter (stringset_of_list elements) !provided in + if not (StringSet.is_empty conflicts) then + error (f_"following elements were explicitly required but are provided by other included elements: %s") + (String.concat "," (StringSet.elements conflicts)); + if not (StringSet.mem "operating-system" !provided) then + error (f_"please include an operating system element"); + StringSet.diff !final !provided + +let elements_with_script elements loaded_elements hook scriptname = + StringSet.filter ( + fun e -> + try + let s = Hashtbl.find (Hashtbl.find loaded_elements e).hooks hook in + List.exists ( + fun p -> + Filename.basename p = scriptname + ) s + with Not_found -> false + ) elements + +let copy_element element destdir blacklist = + let entries = Array.to_list (Sys.readdir element.directory) in + let entries = List.filter ( + fun e -> e <> "tests" + ) entries in + List.iter ( + fun e -> + let path = element.directory // e in + let destpath = destdir // e in + if is_directory path then ( + do_mkdir destpath; + let subentries = Sys.readdir path in + Array.iter ( + fun sube -> + if is_file_or_link (destpath // sube) then ( + let hook = + if Filename.check_suffix e ".d" then + String.sub e 0 ((String.length e) - 2) + else + e in + raise (Duplicate_script (hook, sube)) + ) else if not (List.mem sube blacklist) then + do_cp (path // sube) destpath + ) subentries; + ) else ( + do_cp path destdir + ) + ) entries + +let copy_elements elements loaded_elements blacklist destdir = + do_mkdir destdir; + StringSet.iter ( + fun element -> + try + copy_element (Hashtbl.find loaded_elements element) destdir blacklist + with + | Duplicate_script (hook, script) -> + let dups = elements_with_script elements loaded_elements hook script in + error (f_"There is a duplicated hook in your elements:\n%s.d/%s in: %s") + hook script (String.concat " " (StringSet.elements dups)) + ) elements diff --git a/dib/link.sh.in b/dib/link.sh.in new file mode 100644 index 0000000..71e65ee --- /dev/null +++ b/dib/link.sh.in @@ -0,0 +1,22 @@ +# libguestfs Makefile.am +# @configure_input@ +# (C) Copyright 2015 Red Hat Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +# Hack automake to link binary properly. There is no other way to add +# the -cclib parameter to the end of the command line. + +exec "$@" -linkpkg -cclib '-pthread -lpthread -lutils @LIBINTL@ -lgnu' diff --git a/dib/uname-c.c b/dib/uname-c.c new file mode 100644 index 0000000..fc63233 --- /dev/null +++ b/dib/uname-c.c @@ -0,0 +1,57 @@ +/* virt-builder + * Copyright (C) 2014 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <config.h> + +#include <errno.h> +#include <sys/utsname.h> + +#include <caml/alloc.h> +#include <caml/fail.h> +#include <caml/memory.h> +#include <caml/mlvalues.h> + +#ifdef HAVE_CAML_UNIXSUPPORT_H +#include <caml/unixsupport.h> +#else +#define Nothing ((value) 0) +extern void unix_error (int errcode, char * cmdname, value arg) Noreturn; +#endif + +extern value virt_builder_uname (value unit); + +value +virt_builder_uname (value unit) +{ + CAMLparam0 (); + CAMLlocal1 (rv); + struct utsname u; + + if (uname (&u) < 0) + unix_error (errno, (char *) "uname", Val_int (0)); + + rv = caml_alloc (5, 0); + + Store_field (rv, 0, caml_copy_string (u.sysname)); + Store_field (rv, 1, caml_copy_string (u.nodename)); + Store_field (rv, 2, caml_copy_string (u.release)); + Store_field (rv, 3, caml_copy_string (u.version)); + Store_field (rv, 4, caml_copy_string (u.machine)); + + CAMLreturn (rv); +} diff --git a/dib/uname.ml b/dib/uname.ml new file mode 100644 index 0000000..c370c2c --- /dev/null +++ b/dib/uname.ml @@ -0,0 +1,27 @@ +(* virt-builder + * Copyright (C) 2014 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +type uname_struct = { + sysname : string; + nodename : string; + release : string; + version : string; + machine : string; +} + +external uname : unit -> uname_struct = "virt_builder_uname" diff --git a/dib/uname.mli b/dib/uname.mli new file mode 100644 index 0000000..aea441b --- /dev/null +++ b/dib/uname.mli @@ -0,0 +1,28 @@ +(* virt-builder + * Copyright (C) 2014 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +type uname_struct = { + sysname : string; + nodename : string; + release : string; + version : string; + machine : string; +} + +val uname : unit -> uname_struct +(** [uname] Tiny wrapper to the C [uname]. *) diff --git a/dib/utils.ml b/dib/utils.ml new file mode 100644 index 0000000..b18b4fe --- /dev/null +++ b/dib/utils.ml @@ -0,0 +1,148 @@ +(* virt-dib + * Copyright (C) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +open Common_gettext.Gettext +open Common_utils + +open Printf + +let prog = Filename.basename Sys.executable_name +let error ?exit_code fs = error ~prog ?exit_code fs +let warning fs = warning ~prog fs +let info fs = info ~prog fs + +let unit_GB howmany = + (Int64.of_int howmany) *^ 1024_L *^ 1024_L *^ 1024_L + +let current_arch () = + let normalize_arch = function + | "amd64" | "x86_64" | "x64" -> "amd64" + | "i386"| "i486"| "i586"| "i686" -> "i386" + | arch when string_prefix arch "armv" -> "armhf" + | arch -> arch in + + try normalize_arch ((Uname.uname ()).Uname.machine) + with Unix.Unix_error _ -> "unknown" + +let output_filename image_name = function + | "tgz" -> image_name ^ ".tar.gz" + | fmt -> image_name ^ "." ^ fmt + +let log_filename ~prog = + let tm = Unix.gmtime (Unix.time ()) in + sprintf "%s-%d%02d%02d-%02d%02d%02d.log" + prog (tm.Unix.tm_year + 1900) (tm.Unix.tm_mon + 1) tm.Unix.tm_mday + tm.Unix.tm_hour tm.Unix.tm_min tm.Unix.tm_sec + +let var_from_lines var lines = + let var_with_equal = var ^ "=" in + let lines = List.filter (fun x -> string_prefix x var_with_equal) lines in + let values = List.map ( + fun x -> + let name, value = string_split "=" x in + value + ) lines in + (match values with + | [] -> + error (f_"variable '%s' not found in lines:\n%s") + var (String.concat "\n" lines) + | [x] -> x + | _ -> + error (f_"variable '%s' has more than one occurrency in lines:\n%s") + var (String.concat "\n" lines) + ) + +let digit_prefix_compare a b = + let myint str = + try int_of_string str + with _ -> 0 in + let mylength str = + match String.length str with + | 0 -> max_int + | x -> x in + let count_leading_digits str = + let rec loop str i len = + if i = len then + i + else match str.[i] with + | '0'..'9' -> loop str (i + 1) len + | _ -> i in + loop str 0 (String.length str) in + let split_prefix str = + let len = String.length str in + let digits = count_leading_digits str in + match digits with + | 0 -> "", str + | x when x = len -> str, "" + | _ -> String.sub str 0 digits, String.sub str digits (len - digits) in + + let pref_a, rest_a = split_prefix a in + let pref_b, rest_b = split_prefix b in + match mylength pref_a, mylength pref_b, compare (myint pref_a) (myint pref_b) with + | x, y, 0 when x = y -> compare rest_a rest_b + | x, y, 0 -> x - y + | _, _, x -> x + +let do_mkdir dir = + mkdir_p dir 0o755 + +let do_mkdir_p dir = + mkdir_p dir 0o755 + +let rec remove_dups = function + | [] -> [] + | x :: xs -> + x :: (remove_dups (List.filter (fun x -> x <> x) xs)) + +let run_command ?(tool = "") cmd = + let res = Sys.command cmd in + if res <> 0 then ( + (* Extract the executable name, if not provided. *) + let tool = + match tool with + | "" -> + let tool, _ = string_split " " cmd in + tool + | tool -> tool + in + error (f_"%s command (%s) failed with %d") tool cmd res + ) + +let check_tool ?(param = "--version") tool = + let cmd = sprintf "%s %s 2>&1 >/dev/null" tool param in + let res = Sys.command cmd in + res = 0 + +let require_tool ?(param = "--version") tool = + if not (check_tool ~param tool) then + error (f_"%s needed but not found (or '%s %s' could not be run)") tool tool param + +let is_file_or_link file = + try + match (Unix.stat file).Unix.st_kind with + | Unix.S_REG | Unix.S_LNK -> true + | _ -> false + with Unix.Unix_error _ -> false + +let do_cp src dest = + let cmd = sprintf "cp -t %s -a %s" (Filename.quote dest) (Filename.quote src) in + run_command cmd + +let ensure_trailing_newline str = + if String.length str > 0 && str.[String.length str - 1] <> '\n' then str ^ "\n" + else str diff --git a/dib/virt-dib.pod b/dib/virt-dib.pod new file mode 100644 index 0000000..60b821c --- /dev/null +++ b/dib/virt-dib.pod @@ -0,0 +1,541 @@ +=head1 NAME + +virt-dib - Run diskimage-builder elements + +=head1 SYNOPSIS + + virt-dib -B DIB-LIB [options] elements... + +=head1 DESCRIPTION + +Virt-dib is a tool for using the elements of C<diskimage-builder> +to build a new disk image, generate new ramdisks, etc. + +Virt-dib is intended as safe replacement for C<diskimage-builder> +and its C<ramdisk-image-create> mode, see +L</COMPARISON WITH DISKIMAGE-BUILDER> for a quick comparison with +usage of C<diskimage-builder>. + +C<diskimage-builder> is part of the TripleO OpenStack project: +L<https://wiki.openstack.org/wiki/TripleO>. + +=head1 EXAMPLES + +=head2 Build simple images of distributions + + virt-dib \ + -B /path/to/diskimage-builder/lib \ + -p /path/to/diskimage-builder/elements \ + --envvar DIB_RELEASE=wheezy \ + --name debian-wheezy \ + debian vm + +This builds a Debian Wheezy disk image, suitable for running +as virtual machine, saved as F<debian-wheezy.qcow2>. + +=head2 Build ramdisks + + virt-dib \ + -B /path/to/diskimage-builder/lib \ + -p /path/to/diskimage-builder/elements \ + --ramdisk \ + --name ramdisk \ + ubuntu deploy-ironic + +This builds a ramdisk for the Ironic OpenStack component based +on the Ubuntu distribution. + +=head1 OPTIONS + +=over 4 + +=item B<--help> + +Display help. + +=item B<--arch> ARCHITECURE + +Use the specified architecture for the output image. The default +value is the same as the host running virt-dib. + +Notes: right now it does nothing more than setting the C<ARCH> +environment variable for the elements. + +=item B<--blacklist> SCRIPT + +Blacklist the use of any element script named C<SCRIPT>. + +This can be useful in case some script does not run well with virt-dib, +for example when they really need C<diskimage-builder>'s environment. + +=item B<-B> PATH + +Set the path to the library directory of C<diskimage-builder>. This is +usually the C<lib> subdirectory. + +This parameter is B<mandatory>, as virt-dib needs to provide it for the +elements (as some of them might use scripts in it). Virt-dib itself +does not make use of the library directory. + +=item B<--debug> LEVEL + +Set the debug level to C<LEVEL>, which is a non-negative integer +number. The default is C<0>. + +This debug level is different than what C<-x> and C<-v> set, +and it increases the debugging information printed out. +Specifically, this sets the C<DIB_DEBUG_TRACE>, and any value +E<gt> C<0> enables tracing in the scripts executed. + +=item B<--drive> DISK + +Add the specified disk to be used as helper drive where to cache +files of the elements, like disk images, distribution packages, etc. + +See L</HELPER DRIVE>. + +=item B<-p> PATH + +=item B<--element-path> PATH + +Add a new path with elements. Paths are used in the same order as the +C<-p> parameters appear, so a path specified first is looked first, +and so on. + +Obviously, it is recommended to add the path to the own elements of +C<diskimage-builder>, as most of the other elements will rely on them. + +=item B<--extra-packages> PACKAGE,... + +Install additional packages in the image being built. + +This relies on the C<install-packages> binary provided by the +package management elements. + +This option can be specified multiple times, each time with multiple +packages separated by comma. + +=item B<--envvar> VARIABLE + +=item B<--envvar> VARIABLE=VALUE + +Carry or set an environment variable for the elements. + +See L</ENVIRONMENT VARIABLES> below for more information on the +interaction and usage of environment variables. + +This option can be used in two ways: + +=over 4 + +=item B<--envvar> VARIABLE + +Carry the environment variable C<VARIABLE>. If it is not set, nothing +is exported to the elements. + +=item B<--envvar> VARIABLE=VALUE + +Set the environment variable C<VARIABLE> with value C<VALUE> for the +elements, regardless whether an environment variable with the same +name exists. + +This can be useful to pass environment variable without exporting +them in the environment where virt-dib runs. + +=back + +=item B<--exclude-element> ELEMENT + +Ignore the specified element. + +=item B<--formats> FORMAT,... + +Set the list of output formats, separating them with comma. + +Supported formats are: + +=over 4 + +=item C<qcow2> (enabled by default) + +QEMU's qcow2. + +=item C<raw> + +Raw disk format. + +=item C<tar> + +An uncompressed tarball. + +=back + +=item B<--fs-type> FILESYSTEM + +Set the filesystem type to use for the root filesystem. The default +is C<ext4>. + +See also L<guestfs(3)/guestfs_filesystem_available>. + +=item B<--machine-readable> + +This option is used to make the output more machine friendly +when being parsed by other programs. See +L</MACHINE READABLE OUTPUT> below. + +=item B<-m> MB + +=item B<--memsize> MB + +Change the amount of memory allocated to the appliance. Increase +this if you find that the virt-dib execution runs out of memory. + +The default can be found with this command: + + guestfish get-memsize + +=item B<--network> + +=item B<--no-network> + +Enable or disable network access from the guest during the installation. + +Enabled is the default. Use I<--no-network> to disable access. + +The network only allows outgoing connections and has other minor +limitations. See L<virt-rescue(1)/NETWORK>. + +This does not affect whether the guest can access the network once it +has been booted, because that is controlled by your hypervisor or +cloud environment and has nothing to do with virt-dib. + +If you use I<--no-network>, then the environment variable +C<DIB_OFFLINE> is set to C<1>, signaling the elements that they +should use only cached resources when available. Note also that, +unlike with C<diskimage-builder> where elements may still be able +to access to the network even with C<DIB_OFFLINE=>, under virt-dib +network will be fully unaccessible. + +=item B<--image-cache> DIRECTORY + +Set the path in the host where cache the resources used by the elements +of the C<extra-data> phase. The default is F<~/.cache/image-create>. + +Please note that most of the resources fetched after C<extra-data> +will be cached in the helper drive specified with I<--drive>; +see also L</HELPER DRIVE>. + +=item B<--install-type> TYPE + +Specify the default installation type. Defaults to C<source>. + +Set to C<package> to use package based installations by default. + +=item B<-n> + +Skip the inclusion of the C<base> element. + +=item B<--name> NAME + +Set the name of the output image file. The default is C<image>. + +According to the chosen name, there will be the following in the +current directory: + +=over 4 + +=item F<$NAME.ext> + +For each output format, a disk image named after the outout image +with the extension depending on the format; for example: +F<$NAME.qcow2>, F<$NAME.raw>, F<$NAME.tar.gz>. + +Not applicable in ramdisk mode, see L</RAMDISK BUILDING>. + +=item F<$NAME.d> + +A directory containing any files created by the elements, for example +F<dib-manifests> directory (created by the C<manifests> element), +ramdisks and kernels in ramdisk mode, and so on. + +=back + +=item B<--no-delete-on-failure> + +Don't delete the output files on failure to build. You can use this to +debug failures to run scripts. + +The default is to delete the output file if virt-dib fails (or, +for example, some script that it runs fails). + +=item B<--qemu-img-options> option[,option,...] + +Pass I<--qemu-img-options> option(s) to the L<qemu-img(1)> command +to fine-tune the output format. Options available depend on +the output format (see I<--formats>) and the installed version +of the qemu-img program. + +You should use I<--qemu-img-options> at most once. To pass multiple +options, separate them with commas, eg: + + virt-dib ... --qemu-img-options cluster_size=512,preallocation=metadata ... + +=item B<--ramdisk> + +Set the ramdisk building mode. + +See L</RAMDISK BUILDING>. + +=item B<--ramdisk-element> NAME + +Set the name for the additional element added in ramdisk building mode. +The default is C<ramdisk>. + +See L</RAMDISK BUILDING>. + +=item B<--root-label> LABEL + +Set the label for the root filesystem in the created image. + +Please note that some filesystems have different restrictions on +the length of their labels; for example, on C<ext2/3/4> filesystems +labels cannot be longer than 16 characters, while on C<xfs> they have +at most 12 characters. + +The default depends on the actual filesystem for the root partition +(see I<--fs-type>): on C<xfs> is C<img-rootfs>, while +C<cloudimg-rootfs> on any other filesystem. + +=item B<--size> SIZE + +Select the size of the output disk, where the size can be specified +using common names such as C<32G> (32 gigabytes) etc. +The default size is C<5G>. + +To specify size in bytes, the number must be followed by the lowercase +letter I<b>, eg: S<C<--size 10737418240b>>. + +See also L<virt-resize(1)> for resizing partitions of an existing +disk image. + +=item B<--smp> N + +Enable N E<ge> 2 virtual CPUs for scripts to use. + +=item B<-u> + +Do not compress resulting qcow2 images. The default is +to compressed them. + +=item B<-v> + +=item B<--verbose> + +Enable debugging messages. + +=item B<-V> + +=item B<--version> + +Display version number and exit. + +=item B<-x> + +Enable tracing of libguestfs API calls. + +=back + +=head1 ENVIRONMENT VARIABLES + +Unlike with C<diskimage-builder>, the environment of the host is +B<not> inherited in the appliance when running most of the elements +(i.e. all the ones different than C<extra-data>). + +To set environment for the elements being run, it is necessary to tell +virt-dib to use them, with the option I<--envvar>. Such option +allows to selectively export environment variables when running the +elements, and it is the preferred way to pass environment variables +to the elements. + +To recap: if you want the environment variable C<MYVAR> +(and its content) to be available to the elements, you can do either + + export MYVAR # whichever is its value + virt-dib ... --envvar MYVAR ... + +or + + virt-dib ... --envvar MYVAR=value_of_it ... + +=head1 HELPER DRIVE + +Virt-dib runs most of the element in its own appliance, and thus not +on the host. Because of this, there is no possibility for elements +to cache resources directly on the host. + +To solve this issue, virt-dib allows the usage of an helper drive +where to store cached resources, like disk images, +distribution packages, etc. While this means that there is a smaller +space available for caching, at least it allows to limit the space +on the host for caches, without assuming that elements will do that +by themselves. + +Currently this disk is either required to have a single partition +on it, or the first partition on it will be used. A disk with +the latter configuration can be easily created with L<guestfish(1)> +like the following: + + guestfish -N filename.img=fs:ext4:10G + +The above will create a disk image called F<filename.img>, 10G big, +with a single partition of type ext4; +see L<guestfish(1)/PREPARED DISK IMAGES>. + +It is recommended for it to be E<ge> 5G or even more, as elements +will cache disk images, distribution packages, etc. + +The disk is also used as C<$HOME> during the elements run. +Virt-dib stores in it the logs of the scripts executed in the appliance. + +The drive can be accessed like any other disk image, for example using +other tools of libguestfs such as L<guestfish(1)>: + + guestfish -a filename.img -m /dev/sda1 + +If no helper drive is specified with I<--drive>, all the resources +cached during a virt-dib run will be discarded. + +=head1 RAMDISK BUILDING + +Virt-dib can emulate also C<ramdisk-image-create>, which is a secondary +operation mode of C<diskimage-builder>. Instead of being a different +tool name, virt-dib provides easy access to this mode using the +I<--ramdisk> switch. + +In this mode: + +=over 4 + +=item + +there is an additional ramdisk element added (see I<--ramdisk-element>) + +=item + +no image is produced (so I<--formats> is ignored) + +=item + +F<$NAME.d> (see I<--name>) will contain initrd, kernel, etc + +=back + +=head1 TEMPORARY DIRECTORY + +Virt-dib uses the standard temporary directory used by libguestfs, +see L<guestfs(3)/ENVIRONMENT VARIABLES>. + +By default this location is F</tmp> (default value for C<$TMPDIR>), +which on some systems may be on a tmpfs filesystem, and thus +defaulting to a maximum size of I<half> of physical RAM. +If virt-dib exceeds this, it may hang or exit early with an error. +The solution is to point C<$TMPDIR> to a permanent location used +as temporary location, for example: + + $ mkdir local-tmp + $ env TMPDIR=$PWD/local-tmp virt-dib ... + $ rm -rf local-tmp + +=head1 MACHINE READABLE OUTPUT + +The I<--machine-readable> option can be used to make the output more +machine friendly, which is useful when calling virt-dib from other +programs, GUIs etc. + +Use the option on its own to query the capabilities of the +virt-dib binary. Typical output looks like this: + + $ virt-dib --machine-readable + virt-dib + output:qcow2 + output:tar + output:raw + +A list of features is printed, one per line, and the program exits +with status 0. + +=head1 COMPARISON WITH DISKIMAGE-BUILDER + +Virt-dib is intended as safe replacement for C<diskimage-builder> +and its C<ramdisk-image-create> mode; the user-notable differences +consist in: + +=over 4 + +=item + +the command line arguments; some of the arguments are the same as +available in C<diskimage-builder>, while some have different names + +=item + +the location of non-image output files (like ramdisks and kernels) + +=item + +the way cached resources are saved: using an helper drive, not directly +on the disk where virt-dib is run + +=item + +the need to specify a target size for the output disk, as opposed +to C<diskimage-builder> calculating an optimal one + +=item + +the handling of environment variables; see L</ENVIRONMENT VARIABLES> + +=back + +Elements themselves should notice no difference in they way +they are run; behaviour differences may due to wrong assumptions in +elements, or not correct virt-dib emulation. + +Known issues at the moment: + +=over 4 + +=item + +due to the way C<root.d> elements are run, bind mounts set up to +share dpkg/yum cache will not work in later phases + +=back + +=head1 TESTING + +Virt-dib has been tested with C<diskimage-builder> (and its elements) +E<ge> 0.1.41; from time to time also with C<tripleo-image-elements> +and C<sahara-image-elements>. + +Previous versions may work, but it is not guaranteed. + +=head1 EXIT STATUS + +This program returns 0 if successful, or non-zero if there was an +error. + +=head1 SEE ALSO + +L<guestfs(3)>, +L<guestfish(1)>, +L<virt-resize(1)>, +L<http://libguestfs.org/>. + +=head1 AUTHOR + +Pino Toscano (C<ptoscano at redhat dot com>) + +=head1 COPYRIGHT + +Copyright (C) 2015 Red Hat Inc. diff --git a/po-docs/podfiles b/po-docs/podfiles index c76f1b1..26bd880 100644 --- a/po-docs/podfiles +++ b/po-docs/podfiles @@ -11,6 +11,7 @@ ../customize/virt-customize.pod ../daemon/guestfsd.pod ../df/virt-df.pod +../dib/virt-dib.pod ../diff/virt-diff.pod ../edit/virt-edit.pod ../erlang/examples/guestfs-erlang.pod diff --git a/run.in b/run.in index 8fdf454..5d30bf4 100755 --- a/run.in +++ b/run.in @@ -102,6 +102,7 @@ prepend PATH "$b/sysprep" prepend PATH "$b/test-tool" prepend PATH "$b/tools" prepend PATH "$b/v2v" +prepend PATH "$b/dib" export PATH # Set LD_LIBRARY_PATH and DYLD_LIBRARY_PATH to contain library. -- 2.1.0

9 years, 9 months

1
0
0 / 0

[PATCH] v2v: allow configurable location for virtio drivers

by Roman Kagan

Make the location of the Windows virtio drivers overridable with the environment variable VIRTIO_WIN_DIR, in the same vein as is done for virt-tools. Signed-off-by: Roman Kagan <rkagan(a)parallels.com> --- v2v/convert_windows.ml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/v2v/convert_windows.ml b/v2v/convert_windows.ml index 0cd818a..e966341 100644 --- a/v2v/convert_windows.ml +++ b/v2v/convert_windows.ml @@ -47,7 +47,9 @@ let convert ~verbose ~keep_serial_console (g : G.guestfs) inspect source = try Sys.getenv "VIRT_TOOLS_DATA_DIR" with Not_found -> Config.datadir // "virt-tools" in - let virtio_win_dir = "/usr/share/virtio-win" in + let virtio_win_dir = + try Sys.getenv "VIRTIO_WIN_DIR" + with Not_found -> Config.datadir // "virtio-win" in (* Check if RHEV-APT exists. This is optional. *) let rhev_apt_exe = virt_tools_data_dir // "rhev-apt.exe" in -- 2.1.0

9 years, 9 months

2
6
0 / 0

[PATCH] actions.ml: fix a typo

by Chen Hanxiao

s/inclding/including Signed-off-by: Chen Hanxiao <chenhanxiao(a)cn.fujitsu.com> --- generator/actions.ml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/generator/actions.ml b/generator/actions.ml index bd654a3..11ea436 100644 --- a/generator/actions.ml +++ b/generator/actions.ml @@ -12262,7 +12262,7 @@ Destroy a quota group." }; optional = Some "btrfs"; camel_name = "BTRFSQgroupShow"; shortdesc = "show subvolume quota groups"; longdesc = "\ -Show all subvolume quota groups in a btrfs filesystem, inclding their +Show all subvolume quota groups in a btrfs filesystem, including their usages." }; { defaults with -- 2.1.0

9 years, 9 months

2
1
0 / 0

[PATCH RFC] resize: add p_mbr_p_type as member of type partition

by Chen Hanxiao

Add p_mbr_p_type as member of type partition to describe mbr partition type. Currently we use: List.filter (fun p -> parttype <> MBR || p.G.part_num <= 4_l) to filter out logical partitions. Commit 0c396a4bce578486dfc4a38e1f8c47fd5c2836ea introduce API part_get_mbr_part_type, we could use this to know the part_type. Furthermore, we could also use p_mbr_p_type for resizing logical partitions. Signed-off-by: Chen Hanxiao <chenhanxiao(a)cn.fujitsu.com> --- resize/resize.ml | 47 +++++++++++++++++++++++++++++++---------------- 1 file changed, 31 insertions(+), 16 deletions(-) diff --git a/resize/resize.ml b/resize/resize.ml index 84fd6d4..284d0e3 100644 --- a/resize/resize.ml +++ b/resize/resize.ml @@ -57,6 +57,7 @@ type partition = { p_target_partnum : int; (* TARGET partition number. *) p_target_start : int64; (* TARGET partition start (sector num). *) p_target_end : int64; (* TARGET partition end (sector num). *) + p_mbr_p_type : partition_type (* Partiton Type (master/extended/logical) *) } and partition_content = | ContentUnknown (* undetermined *) @@ -73,9 +74,11 @@ and partition_id = | No_ID (* No identifier. *) | MBR_ID of int (* MBR ID. *) | GPT_Type of string (* GPT UUID. *) - -type partition_type = +and partition_type = | PrimaryPartition + | ExtendedPartition + | LogicalPartition + | NoTypePartition let rec debug_partition p = printf "%s:\n" p.p_name; @@ -99,7 +102,8 @@ let rec debug_partition p = (match p.p_guid with | Some guid -> guid | None -> "(none)" - ) + ); + printf "\tpartition type: %s\n" (string_of_partition_type p.p_mbr_p_type) and string_of_partition_content = function | ContentUnknown -> "unknown data" | ContentPV sz -> sprintf "LVM PV (%Ld bytes)" sz @@ -110,6 +114,11 @@ and string_of_partition_content_no_size = function | ContentPV _ -> "LVM PV" | ContentFS (fs, _) -> sprintf "filesystem %s" fs | ContentExtendedPartition -> "extended partition" +and string_of_partition_type = function + | PrimaryPartition -> "primary" + | ExtendedPartition -> "extended" + | LogicalPartition -> "logical" + | NoTypePartition -> "none" (* Data structure describing LVs on the source disk. This is only * used if the user gave the --lv-expand option. @@ -453,18 +462,9 @@ read the man page virt-resize(1). | MBR_ID _ | GPT_Type _ | No_ID -> false in - let find_partitions part_type = + let find_partitions () = let parts = Array.to_list (g#part_list "/dev/sda") in - (* Filter out logical partitions. See note above. *) - let parts = - match part_type with - (* for GPT, all partitions are regarded as Primary Partition, - * e.g. there is no Extended Partition or Logical Partition. *) - | PrimaryPartition -> - List.filter (fun p -> parttype <> MBR || p.G.part_num <= 4_l) - parts in - let partitions = List.map ( fun ({ G.part_num = part_num } as part) -> @@ -491,14 +491,28 @@ read the man page virt-resize(1). | GPT -> try Some (g#part_get_gpt_guid "/dev/sda" part_num) with G.Error _ -> None in + let mbr_part_type = + let mbr_part_type_str = g#part_get_mbr_part_type "/dev/sda" part_num in + match mbr_part_type_str with + | "primary" -> PrimaryPartition + | "extended" -> ExtendedPartition + | "logical" -> LogicalPartition + | str -> NoTypePartition + in { p_name = name; p_part = part; p_bootable = bootable; p_id = id; p_type = typ; - p_label = label; p_guid = guid; + p_label = label; p_guid = guid; p_mbr_p_type = mbr_part_type; p_operation = OpCopy; p_target_partnum = 0; p_target_start = 0L; p_target_end = 0L } ) parts in + (* Filter out logical partitions. See note above. *) + let partitions = + (* for GPT, all partitions are regarded as Primary Partition, + * e.g. there is no Extended Partition or Logical Partition. *) + List.filter (fun p -> parttype <> MBR || p.p_mbr_p_type <> LogicalPartition) partitions in + (* Check content isn't larger than partitions. If it is then * something has gone wrong and we shouldn't continue. Old * virt-resize didn't do these checks. @@ -530,7 +544,7 @@ read the man page virt-resize(1). partitions in - let partitions = find_partitions PrimaryPartition in + let partitions = find_partitions () in if verbose then ( printf "%d partitions found\n" (List.length partitions); @@ -1085,7 +1099,8 @@ read the man page virt-resize(1). (* Target information is meaningful. *) p_operation = OpIgnore; p_target_partnum = partnum; - p_target_start = start; p_target_end = ~^ 64L + p_target_start = start; p_target_end = ~^ 64L; + p_mbr_p_type = NoTypePartition } ] ) else -- 2.1.0

9 years, 9 months

2
1
0 / 0

Inspection of disk snapshots

by NoxDaFox

Greetings, I have the following typical scenario: given one or more qcow2 base images I clone them with COW and start the VMs. At a certain point I'd like to inspect them in order to see their evolution compared to the known base images. To do so I was thinking about taking a disk snapshot of each VM and inspect its content through libguestfs (using it's Python bindings). Obviously I need the base image in order for libguestfs to correctly guess the OS, the FS structure etc.. Problem is that that point when I inspect the disk I get the whole disk state including the base image content (30K+ files and directories). This is not an issue but it's a very heavy operation considering that some of the snapshots are few megabytes while the base images are several gigabytes. Is there a way to programmatically instruct libguestfs to limit the inspection to the sole snapshot? Would it work as well with other disk format (vmdk linked clones for example)? For better comprehension I'll show the sequence I'm doing (I might do it wrong of course): virsh -c "qemu:///system" snapshot-create --disk-only <domain-ID> I get the snapshot location from its XML description and then: qemu-img convert -f qcow2 -O qcow2 base_image.qcow2 snapshot.qcow2 At that point I mount it through libguestfs and inspect its content. Thank you.

9 years, 9 months

5
14
0 / 0

Re: [Libguestfs] [virt-tools-list] Statically compiling virt-rescue ?

by Richard W.M. Jones

[Sorry - I didn't see this email until now as virt-rescue is part of the http://libguestfs.org project and so normally uses a different mailing list] On Tue, Mar 17, 2015 at 11:29:29AM +0000, Keith Roberts wrote: > Hi all. > > I’d like to create a statically-linked version of virt-rescue that I > can compile on my laptop then deploy that binary locally onto a xen > server hosting VM’s to run virt-rescue on the VM images from there > locally. Note that as well as the rather large list of shared libraries, virt-rescue has a few other dependencies: - a non-Xen kernel - supermin - qemu (even required when the hypervisor is Xen) [...] > Is it possible to statically compile virt-rescue with all the above > required libraries built into the executable, along the lines of the > mysql statically-linked binary? I made a pretty valiant attempt to build a static libguestfs + virt-rescue: $ file rescue/virt-rescue rescue/virt-rescue: ELF 64-bit LSB executable, x86-64, version 1 (GNU/Linux), statically linked, for GNU/Linux 2.6.32, BuildID[sha1]=c0151b6bc99684e970ebad993c4985ee90afb319, not stripped $ ll rescue/virt-rescue -rwxrwxr-x. 1 rjones rjones 8009264 Mar 27 22:50 rescue/virt-rescue Unfortunately it fundamentally doesn't work, because none of the `__attribute__((constructor))'s in the code are ever called[1]. This means, for example, that no backends get registered with the main code. This is a bug, but not one that anyone has noticed until now. Rich. [1] https://stackoverflow.com/questions/1202494/why-doesnt-attribute-construc... -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-builder quickly builds VMs from scratch http://libguestfs.org/virt-builder.1.html

9 years, 9 months

1
2
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

Libguestfs March 2015