December 2014 - Libguestfs - libguestfs List Archives

SELinux relabel API
by Richard W.M. Jones 10 Dec '15

10 Dec '15

[ I realized that we were discussing adding this feature, in various private email, IRC, and this long bugzilla thread: https://bugzilla.redhat.com/show_bug.cgi?id=1060423 That's not how we should do things. Let's discuss it on the mailing list. ] One thing that virt-customize/virt-sysprep/virt-builder have to do is relabel SELinux guests. What we do at the moment is run: if load_policy && fixfiles restore; then rm -f /.autorelabel else touch /.autorelabel echo '%s: SELinux relabelling failed, will relabel at boot instead.' fi while chrooted into the guest (using the 'guestfs_sh' API). This has a number of problems: - It has to load the policy using 'load_policy', but this doesn't work sometimes: * RHEL 5 load_policy takes a parameter. * Doesn't work if appliance kernel is significantly different from guest kernel version, because the binary policy format changes irregularly and is not backwards compatible. * Requires the appliance [host] kernel to be compiled with LSM/SELinux support. - Touching /.autorelabel is often broken, eg. it's broken in Fedora 20 because of systemd (RHBZ#1049656). - /etc/resolv.conf will not be relabelled if guestfs network is on, because of resolv.conf shenanigans in libguestfs.git/daemon/command.c - It requires running guest code, which we'd like to avoid. What would be nice would be to have an API to just do this relabelling. Libguestfs could change this API as required to handle different guests. Dan Walsh helpfully pointed out to us that we've been doing it wrong all along :-) A much better way to relabel is to run: setfiles /etc/selinux/targeted/contexts/files/file_contexts DIR where 'file_contexts' is a file which contains the default labels for files (a set of regexps), and 'DIR' is the directory at which relabelling starts. Note that 'setfiles' would be the libguestfs appliance binary, so no guest binary needs to be run. A simple API could just look like this: guestfs_selinux_relabel (g); which would always use the 'targeted' policy from the guest, and always start relabelling at the root. This would work fine for virt-builder. For Colin's requirements for Project Atomic, I suspect he will want to be able to set the file_contexts file and the root directory, but I'll leave him to describe what would be useful. A couple of notes: - I'd like to avoid baking in assumptions from the 'setfiles' command as far as possible. libguestfs APIs last for many years and some have caused us many years of regret (but that's our job) :-/ - Is it a good idea to tie this into inspection in some way -- for example, inspection could provide us with the path to the current or default SELinux policy. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-top is 'top' for virtual machines. Tiny program with many powerful monitoring features, net stats, disk stats, logging, etc. http://people.redhat.com/~rjones/virt-top

5 10

missing btrfs subvol support
by Olaf Hering 10 Sep '15

10 Sep '15

Is btrfs subvol support failing just for me? Looks like nothing adds the required '@/' string. virt-ls uses the first variant of the command: ><rescue> mount -vo subvol=var/spool,ro /dev/sda2 /sysroot/ [ 113.852047] BTRFS info (device sda2): disk space caching is enabled [ 113.852869] BTRFS: has skinny extents mount: mount(2) failed: No such file or directory ><rescue> mount -vo subvol=@var/spool,ro /dev/sda2 /sysroot/ [ 116.082642] BTRFS info (device sda2): disk space caching is enabled [ 116.083476] BTRFS: has skinny extents mount: mount(2) failed: No such file or directory ><rescue> mount -vo subvol=@/var/spool,ro /dev/sda2 /sysroot/ [ 123.995343] BTRFS info (device sda2): disk space caching is enabled [ 123.996238] BTRFS: has skinny extents mount: /dev/sda2 mounted on /sysroot. ><rescue> exit fstab is: UUID=d538a81f-9778-424d-96cc-e48dd2d4a323 swap swap defaults 0 0 UUID=65b72f12-eccb-4cf2-a4f4-9c4bb462456f / btrfs defaults 0 0 UUID=65b72f12-eccb-4cf2-a4f4-9c4bb462456f /var/spool btrfs subvol=@/var/spool 0 0 Olaf

4 10

[libguestfs] conversion issue on NFS shares
by Artur Krzywdzinski 07 May '15

07 May '15

Hi T'm trying to convert XEN virtual machine image into raw. Source file is on NFS export and destination is also on nfs export. (both exports are mounted on migration servers RW access). I'm getting permission denied. I have RW access to both exports - I can create, delete objects on both exports from migration server. But when I copy img file onto migration server local filesystem, conversion works, from local fs to nfs export. However when I tried to run guestfish against file located on NFS - I'm getting the same erro - Permission denied . [root@kvm01 export]# virt-v2v -i disk migr01.img -o local -os /tmp [ 0.0] Opening the source -i disk migr01.img [ 0.0] Creating an overlay to protect the source from being modified [ 0.0] Opening the overlay virt-v2v: error: libguestfs error: could not create appliance through libvirt. Try running qemu directly without libvirt using this environment variable: export LIBGUESTFS_BACKEND=direct Original error from libvirt: internal error: process exited while connecting to monitor: 2014-10-16T14:25:13.729270Z qemu-kvm: -drive file=/var/tmp/v2vovl60e1a0.qcow2,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=unsafe,discard=unmap: could not open disk image /var/tmp/v2vovl60e1a0.qcow2: Could not open backing file: Could not open '/mnt/xen01/export/migr01.img': Permission denied [code=1 domain=10] If reporting bugs, run virt-v2v with debugging enabled and include the complete output: virt-v2v -v -x [...] [root@kvm01 export]# -- Artur Krzywdzinski

2 2

[PATCH v5 REBASE 0/4] virt-resize: add support for resizing logical
by Hu Tao 04 Mar '15

04 Mar '15

Hi Rich, This is rebase of v5 series. Meanwhile, I found a bug when shrinking partitions, and the fix is incuded in this version (patch 2). Regards, Hu changes to v4: 1. add support to resize extended partition (--resize or --expand extended partition) 2. fix the problem of deficit of 512 bytes when expanding a logical partition (this problem can be reproduced in v4 by only expanding a logical partition, without resizing any other partitions) 3. update the test script to support logical partitions and extended partition changes to v3: 1. merge patch 1 and patch 3 in v3 2. let mbr_part_type return 'primary' for GPT partitions 3. add test for resizing logical partitions 4. fix extending the extended partition (yet). see patch 7. changes to v2: 1. remove p_part_num 2. remove filter_parts 3. name the function calculate_target_partitions 4. remove the code to restart guest introduced in v2 changes to v1: 1. spit the patches so it's easier to review 2. fix the parted error caused by unaligned logical partitions 3. extend the content of logical partitions 4. refactor to make logical partitions a seperate list Hu Tao (4): resize: add partition type LogicalPartition resize: add support to resize logical partitions resize: support resize extended partition resize: test: add support for resizing extended and logical partitions resize/resize.ml | 123 +++++++++++++++++++++++++++++++++++++++------ resize/test-virt-resize.pl | 32 ++---------- 2 files changed, 112 insertions(+), 43 deletions(-) -- 1.9.3

3 14

Issue with Libguestfs
by Thirumalai Nambi 19 Jan '15

19 Jan '15

Hi, I'm using SolusVM control panel to create KVM VPS. Suddenly, I can't make any VPS on Host-Node. Their build log says the SolusVM can't read the libguestfs in server. During the debug, I've tried to mount existing VPS using guestmount command and I can't mount the KVM image. Please check here. ============= [root@SG01KVM256-01 ~]# guestmount -i -a /dev/sgkvm256/kvm104_img /mnt libguestfs: error: guestfs_launch failed. See http://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs and/or run 'libguestfs-test-tool'. [root@SG01KVM256-01 ~]# [root@SG01KVM256-01 ~]# libguestfs-test-tool ************************************************************ * IMPORTANT NOTICE * * When reporting bugs, include the COMPLETE, UNEDITED * output below in your bug report. * ************************************************************ PATH=/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin SELinux: Disabled library version: 1.20.11rhel=6,release=11.el6 guestfs_get_append: (null) guestfs_get_attach_method: appliance guestfs_get_autosync: 1 guestfs_get_cachedir: /var/tmp guestfs_get_direct: 0 guestfs_get_memsize: 500 guestfs_get_network: 0 guestfs_get_path: /usr/lib64/guestfs guestfs_get_pgroup: 0 guestfs_get_qemu: /usr/libexec/qemu-kvm guestfs_get_recovery_proc: 1 guestfs_get_selinux: 0 guestfs_get_smp: 1 guestfs_get_tmpdir: /tmp guestfs_get_trace: 0 guestfs_get_verbose: 1 host_cpu: x86_64 Launching appliance, timeout set to 600 seconds. libguestfs: launch: attach-method=appliance libguestfs: launch: tmpdir=/tmp/libguestfsSD4XN5 libguestfs: launch: umask=0022 libguestfs: launch: euid=0 libguestfs: command: run: febootstrap-supermin-helper libguestfs: command: run: \ --verbose libguestfs: command: run: \ -f checksum libguestfs: command: run: \ /usr/lib64/guestfs/supermin.d libguestfs: command: run: \ x86_64 supermin helper [00000ms] whitelist = (not specified), host_cpu = x86_64, kernel = (null), initrd = (null), appliance = (null) supermin helper [00000ms] inputs[0] = /usr/lib64/guestfs/supermin.d checking modpath /lib/modules/2.6.32-358.el6.x86_64 is a directory picked vmlinuz-2.6.32-358.el6.x86_64 because modpath /lib/modules/2.6.32-358.el6.x86_64 exists checking modpath /lib/modules/2.6.32-504.1.3.el6.x86_64 is a directory picked vmlinuz-2.6.32-504.1.3.el6.x86_64 because modpath /lib/modules/2.6.32-504.1.3.el6.x86_64 exists checking modpath /lib/modules/2.6.32-504.3.3.el6.x86_64 is a directory picked vmlinuz-2.6.32-504.3.3.el6.x86_64 because modpath /lib/modules/2.6.32-504.3.3.el6.x86_64 exists supermin helper [00000ms] finished creating kernel supermin helper [00000ms] visiting /usr/lib64/guestfs/supermin.d supermin helper [00000ms] visiting /usr/lib64/guestfs/supermin.d/base.img supermin helper [00000ms] visiting /usr/lib64/guestfs/supermin.d/daemon.img supermin helper [00000ms] visiting /usr/lib64/guestfs/supermin.d/hostfiles supermin helper [00018ms] visiting /usr/lib64/guestfs/supermin.d/init.img supermin helper [00018ms] visiting /usr/lib64/guestfs/supermin.d/ntfs.hostfiles supermin helper [00018ms] visiting /usr/lib64/guestfs/supermin.d/ntfs.img supermin helper [00018ms] visiting /usr/lib64/guestfs/supermin.d/udev-rules.img supermin helper [00018ms] adding kernel modules supermin helper [00047ms] finished creating appliance libguestfs: checksum of existing appliance: 558a0ef6c941d551c216f1e2cd4fe10e130fba5257fb0921e1ab130fc9f3387c libguestfs: [00050ms] begin testing qemu features libguestfs: command: run: /usr/libexec/qemu-kvm libguestfs: command: run: \ -nographic libguestfs: command: run: \ -help libguestfs: command: run: /usr/libexec/qemu-kvm libguestfs: command: run: \ -nographic libguestfs: command: run: \ -version libguestfs: qemu version 0.12 libguestfs: command: run: /usr/libexec/qemu-kvm libguestfs: command: run: \ -nographic libguestfs: command: run: \ -machine accel=kvm:tcg libguestfs: command: run: \ -device ? libguestfs: [00246ms] finished testing qemu features libguestfs: accept_from_daemon: 0x1404740 g->state = 1 [00247ms] /usr/libexec/qemu-kvm \ -global virtio-blk-pci.scsi=off \ -nodefconfig \ -nodefaults \ -nographic \ -machine accel=kvm:tcg \ -cpu host,+kvmclock \ -m 500 \ -no-reboot \ -kernel /var/tmp/.guestfs-0/kernel.11800 \ -initrd /var/tmp/.guestfs-0/initrd.11800 \ -device virtio-scsi-pci,id=scsi \ -drive file=/tmp/libguestfs-test-tool-sda-uLIKjd,cache=none,format=raw,id=hd0,if=none \ -device scsi-hd,drive=hd0 \ -drive file=/var/tmp/.guestfs-0/root.11800,snapshot=on,id=appliance,if=none,cache=unsafe \ -device scsi-hd,drive=appliance \ -device virtio-serial \ -serial stdio \ -device sga \ -chardev socket,path=/tmp/libguestfsSD4XN5/guestfsd.sock,id=channel0 \ -device virtserialport,chardev=channel0,name=org.libguestfs.channel.0 \ -append 'panic=1 console=ttyS0 udevtimeout=6000 no_timer_check acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=xterm' \x1b[1;256r\x1b[256;256H\x1b[6n Google, Inc. Serial Graphics Adapter 12/07/11 SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ ( mockbuild(a)c6b18n1.dev.centos.org) Wed Dec 7 17:04:47 UTC 2011 Term: 80x24 4 0 SeaBIOS (version seabios-0.6.1.2-28.el6) Probing EDD (edd=off to disable)... ok \x1b[2JInitializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-504.3.3.el6.x86_64 (mockbuild(a)c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Wed Dec 17 01:55:02 UTC 2014 Command line: panic=1 console=ttyS0 udevtimeout=6000 no_timer_check acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=xterm KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls Disabled fast string operations BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f3fd000 (usable) BIOS-e820: 000000001f3fd000 - 000000001f400000 (reserved) BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved) DMI 2.4 present. SMBIOS version 2.4 @ 0xFDA40 Hypervisor detected: KVM last_pfn = 0x1f3fd max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x70106, new 0x7010600070106 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-000000001f3fd000 RAMDISK: 1f19d000 - 1f3ef000 No NUMA configuration found Faking a node at 0000000000000000-000000001f3fd000 Bootmem setup node 0 0000000000000000-000000001f3fd000 NODE_DATA [0000000000009000 - 000000000003cfff] bootmap [000000000003d000 - 0000000000040e7f] pages 4 (7 early reservations) ==> bootmem [0000000000 - 001f3fd000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0002029be4] TEXT DATA BSS ==> [0001000000 - 0002029be4] #3 [001f19d000 - 001f3ef000] RAMDISK ==> [001f19d000 - 001f3ef000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #5 [000202a000 - 000202a07d] BRK ==> [000202a000 - 000202a07d] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000fda60] fda60 kvm-clock: Using msrs 4b564d01 and 4b564d00 kvm-clock: cpu 0, msr 0:1c27841, boot clock Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009d 0: 0x00000100 -> 0x0001f3fd SFI: Simple Firmware Interface v0.7 http://simplefirmware.org Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: BOCHSCPU MPTABLE: Product ID: 0.1 MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) I/O APIC #0 Version 17 at 0xFEC00000. IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 Processors: 1 SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 1f400000 (gap: 1f400000:e0bbc000) Booting paravirtualized kernel on KVM NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880002200000 s90968 r8192 d23720 u2097152 pcpu-alloc: s90968 r8192 d23720 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 kvm-clock: cpu 0, msr 0:2215841, primary cpu clock kvm-stealtime: cpu 0, msr 220d880 Built 1 zonelists in Node order, mobility grouping on. Total pages: 126045 Policy zone: DMA32 Kernel command line: panic=1 console=ttyS0 udevtimeout=6000 no_timer_check acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=xterm [ 0.000000] Disabling memory control group subsystem [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 483860k/511988k available (5336k kernel code, 400k absent, 27728k reserved, 7017k data, 1288k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:33024 nr_irqs:256 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] TSC: cpu family 6 model 45, tsc initial value = 65ac3198 [ 0.000000] Detected 2394.230 MHz processor. [ 0.001999] Calibrating delay loop (skipped) preset value.. 4788.46 BogoMIPS (lpj=2394230) [ 0.002214] pid_max: default: 32768 minimum: 301 [ 0.002702] Security Framework initialized [ 0.003010] SELinux: Disabled at boot. [ 0.004070] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004715] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.005069] Mount-cache hash table entries: 256 [ 0.006090] Initializing cgroup subsys ns [ 0.006398] Initializing cgroup subsys cpuacct [ 0.006743] Initializing cgroup subsys memory [ 0.007015] Initializing cgroup subsys devices [ 0.007353] Initializing cgroup subsys freezer [ 0.007680] Initializing cgroup subsys net_cls [ 0.008003] Initializing cgroup subsys blkio [ 0.008329] Initializing cgroup subsys perf_event [ 0.008678] Initializing cgroup subsys net_prio [ 0.009091] Disabled fast string operations [ 0.010057] mce: CPU supports 10 MCE banks [ 0.010415] alternatives: switching to unfair spinlock [ 0.013836] SMP alternatives: switching to UP code [ 0.029234] Freeing SMP alternatives: 36k freed [ 0.029578] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030003] ftrace: allocating 21918 entries in 86 pages [ 0.032307] Enabling x2apic [ 0.032559] Enabled x2apic [ 0.033002] APIC routing finalized to physical x2apic. [ 0.035254] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.035755] CPU0: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz stepping 07 [ 0.138051] Performance Events: 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.138838] PEBS disabled due to CPU errata, please upgrade microcode [ 0.138994] ... version: 2 [ 0.139335] ... bit width: 48 [ 0.139988] ... generic registers: 8 [ 0.140324] ... value mask: 0000ffffffffffff [ 0.140770] ... max period: 000000007fffffff [ 0.140988] ... fixed-purpose events: 3 [ 0.141321] ... event mask: 00000007000000ff [ 0.142928] NMI watchdog enabled, takes one hw-pmu counter. [ 0.143041] Brought up 1 CPUs [ 0.143307] Total of 1 processors activated (4788.46 BogoMIPS). [ 0.145019] devtmpfs: initialized [ 0.148140] regulator: core version 0.5 [ 0.148532] NET: Registered protocol family 16 [ 0.149946] PCI: Using configuration type 1 for base access [ 0.151262] bio: create slab <bio-0> at 0 [ 0.151716] ACPI: Interpreter disabled. [ 0.152022] vgaarb: loaded [ 0.152859] SCSI subsystem initialized [ 0.153069] usbcore: registered new interface driver usbfs [ 0.153553] usbcore: registered new interface driver hub [ 0.154006] usbcore: registered new device driver usb [ 0.154516] PCI: Probing PCI hardware [ 0.155012] PCI host bridge to bus 0000:00 [ 0.155361] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.155987] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffffff] [ 0.157727] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.157993] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.160185] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000] [ 0.160834] NetLabel: Initializing [ 0.160986] NetLabel: domain hash size = 128 [ 0.161353] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.161785] NetLabel: unlabeled traffic allowed by default [ 0.162023] Switching to clocksource kvm-clock [ 0.170170] pnp: PnP ACPI: disabled [ 0.170701] NET: Registered protocol family 2 [ 0.171141] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.172355] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.173041] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.173627] TCP: Hash tables configured (established 16384 bind 16384) [ 0.174191] TCP reno registered [ 0.174525] NET: Registered protocol family 1 [ 0.174915] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.175427] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.175920] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.176474] Trying to unpack rootfs image as initramfs... [ 0.178720] Freeing initrd memory: 2376k freed [ 0.179452] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.180392] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.180989] audit: initializing netlink socket (disabled) [ 0.181485] type=2000 audit(1418908251.180:1): initialized [ 0.190278] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.191523] VFS: Disk quotas dquot_6.5.2 [ 0.191888] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.192529] msgmni has been set to 949 [ 0.193076] alg: No test for stdrng (krng) [ 0.193436] ksign: Installing public key data [ 0.193810] Loading keyring [ 0.194077] - Added public key A25F8C29DC55AB79 [ 0.194464] - User ID: CentOS (Kernel Module GPG key) [ 0.194921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.195565] io scheduler noop registered [ 0.195910] io scheduler anticipatory registered [ 0.196311] io scheduler deadline registered [ 0.196692] io scheduler cfq registered (default) [ 0.197228] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.197729] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.198298] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.199783] Non-volatile memory driver v1.3 [ 0.200157] Linux agpgart interface v0.103 [ 0.200585] crash memory driver: version 1.1 [ 0.200957] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled \xff[ 0.445601] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.447662] brd: module loaded [ 0.448342] loop: module loaded [ 0.448647] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.449341] Fixed MDIO Bus: probed [ 0.449666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.450242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.450777] uhci_hcd: USB Universal Host Controller Interface driver [ 0.451837] PNP: No PS/2 controller found. Probing ports directly. [ 0.452920] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.453356] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.453859] mice: PS/2 mouse device common for all mice [ 0.454556] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.455521] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.456140] rtc0: alarms up to one day, 114 bytes nvram [ 0.456627] cpuidle: using governor ladder [ 0.456991] cpuidle: using governor menu [ 0.457335] EFI Variables Facility v0.08 2004-May-17 [ 0.459313] usbcore: registered new interface driver hiddev [ 0.459802] usbcore: registered new interface driver usbhid [ 0.460279] usbhid: v2.6:USB HID core driver [ 0.460666] GRE over IPv4 demultiplexor driver [ 0.461069] TCP cubic registered [ 0.461370] Initializing XFRM netlink socket [ 0.461737] NET: Registered protocol family 17 [ 0.462201] registered taskstats version 1 [ 0.462716] rtc_cmos rtc_cmos: setting system clock to 2014-12-18 13:10:50 UTC (1418908250) [ 0.463460] Initalizing network drop monitor service [ 0.463905] Freeing unused kernel memory: 1288k freed [ 0.464668] Write protecting the kernel read-only data: 10240k [ 0.465313] Freeing unused kernel memory: 788k freed [ 0.466032] Freeing unused kernel memory: 1568k freed febootstrap: mounting /proc febootstrap: uptime: 0.46 0.27 febootstrap: ext2 mini initrd starting up: 3.21 zlib febootstrap: cmdline: panic=1 console=ttyS0 udevtimeout=6000 no_timer_check acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=xterm febootstrap: mounting /sys febootstrap: internal insmod libcrc32c.ko febootstrap: internal insmod crc32c-intel.ko febootstrap: internal insmod crc-itu-t.ko febootstrap: internal insmod crc-t10dif.ko [ 0.498473] STARTING CRC_T10DIF febootstrap: internal insmod crc-ccitt.ko febootstrap: internal insmod crc7.ko febootstrap: internal insmod mbcache.ko febootstrap: internal insmod cdrom.ko febootstrap: internal insmod sr_mod.ko febootstrap: internal insmod ata_piix.ko [ 0.549216] scsi0 : ata_piix [ 0.549551] scsi1 : ata_piix [ 0.549835] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14 [ 0.550420] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15 febootstrap: internal insmod scsi_transport_spi.ko febootstrap: internal insmod sym53c8xx.ko febootstrap: internal insmod sd_mod.ko febootstrap: internal insmod virtio_ring.ko febootstrap: internal insmod virtio.ko febootstrap: internal insmod virtio-rng.ko febootstrap: internal insmod virtio_console.ko febootstrap: internal insmod virtio_blk.ko febootstrap: internal insmod virtio_scsi.ko febootstrap: internal insmod virtio_net.ko febootstrap: internal insmod virtio_pci.ko [ 0.804785] virtio-pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 10 [ 0.842729] scsi2 : Virtio SCSI HBA [ 0.844484] virtio-pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 11 [ 0.845127] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 0.12 PQ: 0 ANSI: 5 [ 0.850752] scsi 2:0:1:0: Direct-Access QEMU QEMU HARDDISK 0.12 PQ: 0 ANSI: 5 [ 0.883105] sd 2:0:0:0: [sda] 204800 512-byte logical blocks: (104 MB/100 MiB) [ 0.887102] sd 2:0:0:0: [sda] Write Protect is off [ 0.888039] sd 2:0:1:0: [sdb] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB) [ 0.889404] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.891458] sd 2:0:1:0: [sdb] Write Protect is off [ 0.892440] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.893988] sda: unknown partition table [ 0.896071] sdb: [ 0.896674] sd 2:0:0:0: [sda] Attached SCSI disk [ 0.897767] unknown partition table [ 0.899114] sd 2:0:1:0: [sdb] Attached SCSI disk febootstrap: internal insmod virtio_balloon.ko febootstrap: internal insmod jbd2.ko febootstrap: internal insmod ext4.ko febootstrap: internal insmod ext2.ko febootstrap: picked /sys/block/sdb/dev as root device febootstrap: creating /dev/root as block special 8:16 febootstrap: mounting new root on /root febootstrap: chroot Starting /init script ... [ 1.090794] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 Starting udev: udevd[108]: specified group 'dialout' unknown udevd[108]: specified group 'dialout' unknown udevd[108]: specified group 'floppy' unknown udevd[108]: specified group 'floppy' unknown udevd[108]: specified user 'vcsa' unknown udevd[108]: specified user 'vcsa' unknown udevd[108]: specified group 'cdrom' unknown udevd[108]: specified group 'cdrom' unknown udevd[108]: specified group 'tape' unknown udevd[108]: specified group 'tape' unknown /sbin/start_udev: line 299: /etc/sysconfig/network: No such file or directory [ 1.227490] udev: starting version 147 [ 1.342135] ACPI Exception: AE_BAD_PARAMETER, Thread ffff88001db36aa0 could not acquire Mutex [0x1] (20090903/utmutex-290) [ 1.343146] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 1.383174] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.384082] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ OK ] RTNETLINK answers: File exists Cannot find device "eth0" Cannot find device "eth0" RTNETLINK answers: No such process mdadm: No arrays found in config file or automatically [ 2.276180] device-mapper: uevent: version 1.0.3 [ 2.277239] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel(a)redhat.com WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it! Reading all physical volumes. This may take a while... No volume groups found WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it! No volume groups found /init: line 99: ldmtool: command not found /init: line 102: /sys/block/vd*/queue/rotational: No such file or directory Linux (none) 2.6.32-504.3.3.el6.x86_64 #1 SMP Wed Dec 17 01:55:02 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux /dev: total 0 lrwxrwxrwx 1 root root 13 Dec 18 21:10 MAKEDEV -> /sbin/MAKEDEV drwxr-xr-x 2 root root 560 Dec 18 13:10 block drwxr-xr-x 2 root root 80 Dec 18 21:10 bsg drwxr-xr-x 2 root root 2220 Dec 18 21:10 char crw------- 1 root root 5, 1 Dec 18 13:10 console lrwxrwxrwx 1 root root 11 Dec 18 21:10 core -> /proc/kcore drwxr-xr-x 3 root root 60 Dec 18 21:10 cpu crw-rw---- 1 root root 10, 61 Dec 18 13:10 cpu_dma_latency crw-rw---- 1 root root 10, 62 Dec 18 13:10 crash drwxr-xr-x 5 root root 100 Dec 18 13:10 disk lrwxrwxrwx 1 root root 13 Dec 18 21:10 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 Dec 18 13:10 full crw-rw-rw- 1 root root 10, 229 Dec 18 21:10 fuse drwxr-xr-x 2 root root 40 Dec 18 21:10 hugepages drwxr-xr-x 3 root root 180 Dec 18 13:10 input crw-rw---- 1 root root 1, 11 Dec 18 13:10 kmsg brw-rw---- 1 root disk 7, 0 Dec 18 13:10 loop0 brw-rw---- 1 root disk 7, 1 Dec 18 13:10 loop1 brw-rw---- 1 root disk 7, 2 Dec 18 13:10 loop2 brw-rw---- 1 root disk 7, 3 Dec 18 13:10 loop3 brw-rw---- 1 root disk 7, 4 Dec 18 13:10 loop4 brw-rw---- 1 root disk 7, 5 Dec 18 13:10 loop5 brw-rw---- 1 root disk 7, 6 Dec 18 13:10 loop6 brw-rw---- 1 root disk 7, 7 Dec 18 13:10 loop7 crw-rw---- 1 root lp 6, 0 Dec 18 21:10 lp0 crw-rw---- 1 root lp 6, 1 Dec 18 21:10 lp1 crw-rw---- 1 root lp 6, 2 Dec 18 21:10 lp2 crw-rw---- 1 root lp 6, 3 Dec 18 21:10 lp3 drwxr-xr-x 2 root root 60 Dec 18 21:10 mapper crw-rw---- 1 root root 10, 227 Dec 18 13:10 mcelog drwxr-xr-x 2 root root 60 Dec 18 21:10 md crw-r----- 1 root kmem 1, 1 Dec 18 13:10 mem drwxr-xr-x 2 root root 60 Dec 18 21:10 net crw-rw---- 1 root root 10, 60 Dec 18 13:10 network_latency crw-rw---- 1 root root 10, 59 Dec 18 13:10 network_throughput crw-rw-rw- 1 root root 1, 3 Dec 18 13:10 null crw-r----- 1 root kmem 10, 144 Dec 18 13:10 nvram crw-rw---- 1 root root 1, 12 Dec 18 13:10 oldmem crw-r----- 1 root kmem 1, 4 Dec 18 13:10 port crw------- 1 root root 108, 0 Dec 18 21:10 ppp crw-rw-rw- 1 root tty 5, 2 Dec 18 13:10 ptmx drwxr-xr-x 2 root root 40 Dec 18 21:10 pts brw-rw---- 1 root disk 1, 0 Dec 18 13:10 ram0 brw-rw---- 1 root disk 1, 1 Dec 18 13:10 ram1 brw-rw---- 1 root disk 1, 10 Dec 18 13:10 ram10 brw-rw---- 1 root disk 1, 11 Dec 18 13:10 ram11 brw-rw---- 1 root disk 1, 12 Dec 18 13:10 ram12 brw-rw---- 1 root disk 1, 13 Dec 18 13:10 ram13 brw-rw---- 1 root disk 1, 14 Dec 18 13:10 ram14 brw-rw---- 1 root disk 1, 15 Dec 18 13:10 ram15 brw-rw---- 1 root disk 1, 2 Dec 18 13:10 ram2 brw-rw---- 1 root disk 1, 3 Dec 18 13:10 ram3 brw-rw---- 1 root disk 1, 4 Dec 18 13:10 ram4 brw-rw---- 1 root disk 1, 5 Dec 18 13:10 ram5 brw-rw---- 1 root disk 1, 6 Dec 18 13:10 ram6 brw-rw---- 1 root disk 1, 7 Dec 18 13:10 ram7 brw-rw---- 1 root disk 1, 8 Dec 18 13:10 ram8 brw-rw---- 1 root disk 1, 9 Dec 18 13:10 ram9 crw-rw-rw- 1 root root 1, 8 Dec 18 13:10 random drwxr-xr-x 2 root root 60 Dec 18 21:10 raw lrwxrwxrwx 1 root root 4 Dec 18 21:10 rtc -> rtc0 crw-rw---- 1 root root 254, 0 Dec 18 21:10 rtc0 brw-rw---- 1 root disk 8, 0 Dec 18 13:10 sda brw-rw---- 1 root disk 8, 16 Dec 18 13:10 sdb crw-rw---- 1 root disk 21, 0 Dec 18 13:10 sg0 crw-rw---- 1 root disk 21, 1 Dec 18 13:10 sg1 drwxr-xr-x 2 root root 40 Dec 18 21:10 shm crw-rw---- 1 root root 10, 231 Dec 18 13:10 snapshot lrwxrwxrwx 1 root root 15 Dec 18 21:10 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 Dec 18 21:10 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 Dec 18 21:10 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 Dec 18 13:10 tty crw--w---- 1 root tty 4, 0 Dec 18 13:10 tty0 crw--w---- 1 root tty 4, 1 Dec 18 13:10 tty1 crw--w---- 1 root tty 4, 10 Dec 18 13:10 tty10 crw--w---- 1 root tty 4, 11 Dec 18 13:10 tty11 crw--w---- 1 root tty 4, 12 Dec 18 13:10 tty12 crw--w---- 1 root tty 4, 13 Dec 18 13:10 tty13 crw--w---- 1 root tty 4, 14 Dec 18 13:10 tty14 crw--w---- 1 root tty 4, 15 Dec 18 13:10 tty15 crw--w---- 1 root tty 4, 16 Dec 18 13:10 tty16 crw--w---- 1 root tty 4, 17 Dec 18 13:10 tty17 crw--w---- 1 root tty 4, 18 Dec 18 13:10 tty18 crw--w---- 1 root tty 4, 19 Dec 18 13:10 tty19 crw--w---- 1 root tty 4, 2 Dec 18 13:10 tty2 crw--w---- 1 root tty 4, 20 Dec 18 13:10 tty20 crw--w---- 1 root tty 4, 21 Dec 18 13:10 tty21 crw--w---- 1 root tty 4, 22 Dec 18 13:10 tty22 crw--w---- 1 root tty 4, 23 Dec 18 13:10 tty23 crw--w---- 1 root tty 4, 24 Dec 18 13:10 tty24 crw--w---- 1 root tty 4, 25 Dec 18 13:10 tty25 crw--w---- 1 root tty 4, 26 Dec 18 13:10 tty26 crw--w---- 1 root tty 4, 27 Dec 18 13:10 tty27 crw--w---- 1 root tty 4, 28 Dec 18 13:10 tty28 crw--w---- 1 root tty 4, 29 Dec 18 13:10 tty29 crw--w---- 1 root tty 4, 3 Dec 18 13:10 tty3 crw--w---- 1 root tty 4, 30 Dec 18 13:10 tty30 crw--w---- 1 root tty 4, 31 Dec 18 13:10 tty31 crw--w---- 1 root tty 4, 32 Dec 18 13:10 tty32 crw--w---- 1 root tty 4, 33 Dec 18 13:10 tty33 crw--w---- 1 root tty 4, 34 Dec 18 13:10 tty34 crw--w---- 1 root tty 4, 35 Dec 18 13:10 tty35 crw--w---- 1 root tty 4, 36 Dec 18 13:10 tty36 crw--w---- 1 root tty 4, 37 Dec 18 13:10 tty37 crw--w---- 1 root tty 4, 38 Dec 18 13:10 tty38 crw--w---- 1 root tty 4, 39 Dec 18 13:10 tty39 crw--w---- 1 root tty 4, 4 Dec 18 13:10 tty4 crw--w---- 1 root tty 4, 40 Dec 18 13:10 tty40 crw--w---- 1 root tty 4, 41 Dec 18 13:10 tty41 crw--w---- 1 root tty 4, 42 Dec 18 13:10 tty42 crw--w---- 1 root tty 4, 43 Dec 18 13:10 tty43 crw--w---- 1 root tty 4, 44 Dec 18 13:10 tty44 crw--w---- 1 root tty 4, 45 Dec 18 13:10 tty45 crw--w---- 1 root tty 4, 46 Dec 18 13:10 tty46 crw--w---- 1 root tty 4, 47 Dec 18 13:10 tty47 crw--w---- 1 root tty 4, 48 Dec 18 13:10 tty48 crw--w---- 1 root tty 4, 49 Dec 18 13:10 tty49 crw--w---- 1 root tty 4, 5 Dec 18 13:10 tty5 crw--w---- 1 root tty 4, 50 Dec 18 13:10 tty50 crw--w---- 1 root tty 4, 51 Dec 18 13:10 tty51 crw--w---- 1 root tty 4, 52 Dec 18 13:10 tty52 crw--w---- 1 root tty 4, 53 Dec 18 13:10 tty53 crw--w---- 1 root tty 4, 54 Dec 18 13:10 tty54 crw--w---- 1 root tty 4, 55 Dec 18 13:10 tty55 crw--w---- 1 root tty 4, 56 Dec 18 13:10 tty56 crw--w---- 1 root tty 4, 57 Dec 18 13:10 tty57 crw--w---- 1 root tty 4, 58 Dec 18 13:10 tty58 crw--w---- 1 root tty 4, 59 Dec 18 13:10 tty59 crw--w---- 1 root tty 4, 6 Dec 18 13:10 tty6 crw--w---- 1 root tty 4, 60 Dec 18 13:10 tty60 crw--w---- 1 root tty 4, 61 Dec 18 13:10 tty61 crw--w---- 1 root tty 4, 62 Dec 18 13:10 tty62 crw--w---- 1 root tty 4, 63 Dec 18 13:10 tty63 crw--w---- 1 root tty 4, 7 Dec 18 13:10 tty7 crw--w---- 1 root tty 4, 8 Dec 18 13:10 tty8 crw--w---- 1 root tty 4, 9 Dec 18 13:10 tty9 crw-rw---- 1 root root 4, 64 Dec 18 13:10 ttyS0 crw-rw---- 1 root root 4, 65 Dec 18 13:10 ttyS1 crw-rw---- 1 root root 4, 66 Dec 18 13:10 ttyS2 crw-rw---- 1 root root 4, 67 Dec 18 13:10 ttyS3 crw-rw-rw- 1 root root 1, 9 Dec 18 13:10 urandom crw-rw---- 1 root root 250, 0 Dec 18 13:10 usbmon0 crw-rw---- 1 root tty 7, 0 Dec 18 13:10 vcs crw-rw---- 1 root tty 7, 1 Dec 18 13:10 vcs1 crw-rw---- 1 root tty 7, 128 Dec 18 13:10 vcsa crw-rw---- 1 root tty 7, 129 Dec 18 13:10 vcsa1 crw-rw---- 1 root root 10, 63 Dec 18 13:10 vga_arbiter drwxr-xr-x 2 root root 60 Dec 18 21:10 virtio-ports crw-rw---- 1 root root 248, 1 Dec 18 21:10 vport0p1 crw-rw-rw- 1 root root 1, 5 Dec 18 13:10 zero /dev/block: total 0 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:0 -> ../ram0 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:1 -> ../ram1 lrwxrwxrwx 1 root root 8 Dec 18 13:10 1:10 -> ../ram10 lrwxrwxrwx 1 root root 8 Dec 18 13:10 1:11 -> ../ram11 lrwxrwxrwx 1 root root 8 Dec 18 13:10 1:12 -> ../ram12 lrwxrwxrwx 1 root root 8 Dec 18 13:10 1:13 -> ../ram13 lrwxrwxrwx 1 root root 8 Dec 18 13:10 1:14 -> ../ram14 lrwxrwxrwx 1 root root 8 Dec 18 13:10 1:15 -> ../ram15 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:2 -> ../ram2 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:3 -> ../ram3 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:4 -> ../ram4 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:5 -> ../ram5 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:6 -> ../ram6 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:7 -> ../ram7 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:8 -> ../ram8 lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:9 -> ../ram9 lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:0 -> ../loop0 lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:1 -> ../loop1 lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:2 -> ../loop2 lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:3 -> ../loop3 lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:4 -> ../loop4 lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:5 -> ../loop5 lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:6 -> ../loop6 lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:7 -> ../loop7 lrwxrwxrwx 1 root root 6 Dec 18 13:10 8:0 -> ../sda lrwxrwxrwx 1 root root 6 Dec 18 13:10 8:16 -> ../sdb /dev/bsg: total 0 crw-rw---- 1 root root 251, 0 Dec 18 13:10 2:0:0:0 crw-rw---- 1 root root 251, 1 Dec 18 13:10 2:0:1:0 /dev/char: total 0 lrwxrwxrwx 1 root root 8 Dec 18 13:10 10:144 -> ../nvram lrwxrwxrwx 1 root root 9 Dec 18 13:10 10:227 -> ../mcelog lrwxrwxrwx 1 root root 11 Dec 18 13:10 10:231 -> ../snapshot lrwxrwxrwx 1 root root 17 Dec 18 21:10 10:58 -> ../mapper/control lrwxrwxrwx 1 root root 21 Dec 18 13:10 10:59 -> ../network_throughput lrwxrwxrwx 1 root root 18 Dec 18 13:10 10:60 -> ../network_latency lrwxrwxrwx 1 root root 18 Dec 18 13:10 10:61 -> ../cpu_dma_latency lrwxrwxrwx 1 root root 8 Dec 18 13:10 10:62 -> ../crash lrwxrwxrwx 1 root root 14 Dec 18 13:10 10:63 -> ../vga_arbiter lrwxrwxrwx 1 root root 15 Dec 18 13:10 13:32 -> ../input/mouse0 lrwxrwxrwx 1 root root 15 Dec 18 13:10 13:33 -> ../input/mouse1 lrwxrwxrwx 1 root root 13 Dec 18 13:10 13:63 -> ../input/mice lrwxrwxrwx 1 root root 15 Dec 18 13:10 13:64 -> ../input/event0 lrwxrwxrwx 1 root root 15 Dec 18 13:10 13:65 -> ../input/event1 lrwxrwxrwx 1 root root 15 Dec 18 13:10 13:66 -> ../input/event2 lrwxrwxrwx 1 root root 13 Dec 18 13:10 162:0 -> ../raw/rawctl lrwxrwxrwx 1 root root 6 Dec 18 13:10 1:1 -> ../mem lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:11 -> ../kmsg lrwxrwxrwx 1 root root 9 Dec 18 13:10 1:12 -> ../oldmem lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:3 -> ../null lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:4 -> ../port lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:5 -> ../zero lrwxrwxrwx 1 root root 7 Dec 18 13:10 1:7 -> ../full lrwxrwxrwx 1 root root 9 Dec 18 13:10 1:8 -> ../random lrwxrwxrwx 1 root root 10 Dec 18 13:10 1:9 -> ../urandom lrwxrwxrwx 1 root root 12 Dec 18 13:10 202:0 -> ../cpu/0/msr lrwxrwxrwx 1 root root 14 Dec 18 13:10 203:0 -> ../cpu/0/cpuid lrwxrwxrwx 1 root root 6 Dec 18 13:10 21:0 -> ../sg0 lrwxrwxrwx 1 root root 6 Dec 18 13:10 21:1 -> ../sg1 lrwxrwxrwx 1 root root 11 Dec 18 21:10 248:1 -> ../vport0p1 lrwxrwxrwx 1 root root 10 Dec 18 13:10 250:0 -> ../usbmon0 lrwxrwxrwx 1 root root 14 Dec 18 13:10 251:0 -> ../bsg/2:0:0:0 lrwxrwxrwx 1 root root 14 Dec 18 13:10 251:1 -> ../bsg/2:0:1:0 lrwxrwxrwx 1 root root 7 Dec 18 21:10 254:0 -> ../rtc0 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:0 -> ../tty0 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:1 -> ../tty1 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:10 -> ../tty10 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:11 -> ../tty11 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:12 -> ../tty12 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:13 -> ../tty13 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:14 -> ../tty14 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:15 -> ../tty15 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:16 -> ../tty16 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:17 -> ../tty17 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:18 -> ../tty18 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:19 -> ../tty19 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:2 -> ../tty2 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:20 -> ../tty20 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:21 -> ../tty21 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:22 -> ../tty22 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:23 -> ../tty23 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:24 -> ../tty24 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:25 -> ../tty25 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:26 -> ../tty26 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:27 -> ../tty27 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:28 -> ../tty28 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:29 -> ../tty29 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:3 -> ../tty3 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:30 -> ../tty30 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:31 -> ../tty31 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:32 -> ../tty32 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:33 -> ../tty33 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:34 -> ../tty34 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:35 -> ../tty35 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:36 -> ../tty36 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:37 -> ../tty37 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:38 -> ../tty38 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:39 -> ../tty39 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:4 -> ../tty4 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:40 -> ../tty40 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:41 -> ../tty41 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:42 -> ../tty42 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:43 -> ../tty43 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:44 -> ../tty44 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:45 -> ../tty45 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:46 -> ../tty46 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:47 -> ../tty47 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:48 -> ../tty48 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:49 -> ../tty49 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:5 -> ../tty5 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:50 -> ../tty50 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:51 -> ../tty51 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:52 -> ../tty52 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:53 -> ../tty53 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:54 -> ../tty54 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:55 -> ../tty55 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:56 -> ../tty56 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:57 -> ../tty57 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:58 -> ../tty58 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:59 -> ../tty59 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:6 -> ../tty6 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:60 -> ../tty60 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:61 -> ../tty61 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:62 -> ../tty62 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:63 -> ../tty63 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:64 -> ../ttyS0 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:65 -> ../ttyS1 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:66 -> ../ttyS2 lrwxrwxrwx 1 root root 8 Dec 18 13:10 4:67 -> ../ttyS3 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:7 -> ../tty7 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:8 -> ../tty8 lrwxrwxrwx 1 root root 7 Dec 18 13:10 4:9 -> ../tty9 lrwxrwxrwx 1 root root 6 Dec 18 13:10 5:0 -> ../tty lrwxrwxrwx 1 root root 10 Dec 18 13:10 5:1 -> ../console lrwxrwxrwx 1 root root 7 Dec 18 13:10 5:2 -> ../ptmx lrwxrwxrwx 1 root root 6 Dec 18 13:10 7:0 -> ../vcs lrwxrwxrwx 1 root root 7 Dec 18 13:10 7:1 -> ../vcs1 lrwxrwxrwx 1 root root 7 Dec 18 13:10 7:128 -> ../vcsa lrwxrwxrwx 1 root root 8 Dec 18 13:10 7:129 -> ../vcsa1 /dev/cpu: total 0 drwxr-xr-x 2 root root 80 Dec 18 21:10 0 /dev/cpu/0: total 0 cr--r--r-- 1 root root 203, 0 Dec 18 13:10 cpuid crw-rw---- 1 root root 202, 0 Dec 18 13:10 msr /dev/disk: total 0 drwxr-xr-x 2 root root 80 Dec 18 13:10 by-id drwxr-xr-x 2 root root 80 Dec 18 13:10 by-path drwxr-xr-x 2 root root 60 Dec 18 13:10 by-uuid /dev/disk/by-id: total 0 lrwxrwxrwx 1 root root 9 Dec 18 13:10 scsi-0QEMU_QEMU_HARDDISK_appliance -> ../../sdb lrwxrwxrwx 1 root root 9 Dec 18 13:10 scsi-0QEMU_QEMU_HARDDISK_hd0 -> ../../sda /dev/disk/by-path: total 0 lrwxrwxrwx 1 root root 9 Dec 18 13:10 pci-0000:00:02.0-virtio-pci-virtio0-scsi-0:0:0:0 -> ../../sda lrwxrwxrwx 1 root root 9 Dec 18 13:10 pci-0000:00:02.0-virtio-pci-virtio0-scsi-0:0:1:0 -> ../../sdb /dev/disk/by-uuid: total 0 lrwxrwxrwx 1 root root 9 Dec 18 13:10 02de0480-f769-4ab6-b95f-1926b2aa42d4 -> ../../sdb /dev/hugepages: total 0 /dev/input: total 0 drwxr-xr-x 2 root root 100 Dec 18 13:10 by-path crw-r----- 1 root root 13, 64 Dec 18 13:10 event0 crw-r----- 1 root root 13, 65 Dec 18 13:10 event1 crw-r----- 1 root root 13, 66 Dec 18 13:10 event2 crw-r----- 1 root root 13, 63 Dec 18 13:10 mice crw-r----- 1 root root 13, 32 Dec 18 13:10 mouse0 crw-r----- 1 root root 13, 33 Dec 18 13:10 mouse1 /dev/input/by-path: total 0 lrwxrwxrwx 1 root root 9 Dec 18 13:10 platform-i8042-serio-0-event-kbd -> ../event1 lrwxrwxrwx 1 root root 9 Dec 18 13:10 platform-i8042-serio-1-event-mouse -> ../event2 lrwxrwxrwx 1 root root 9 Dec 18 13:10 platform-i8042-serio-1-mouse -> ../mouse1 /dev/mapper: total 0 crw-rw---- 1 root root 10, 58 Dec 18 21:10 control /dev/md: total 0 -rw------- 1 root root 0 Dec 18 21:10 md-device-map /dev/net: total 0 crw-rw-rw- 1 root root 10, 200 Dec 18 21:10 tun /dev/pts: total 0 /dev/raw: total 0 crw-rw---- 1 root disk 162, 0 Dec 18 13:10 rawctl /dev/shm: total 0 /dev/virtio-ports: total 0 lrwxrwxrwx 1 root root 11 Dec 18 21:10 org.libguestfs.channel.0 -> ../vport0p1 rootfs / rootfs rw 0 0 proc /proc proc rw,relatime 0 0 /dev/root / ext2 rw,noatime,errors=continue 0 0 /proc /proc proc rw,relatime 0 0 /sys /sys sysfs rw,relatime 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=97984k,mode=755 0 0 /dev /dev devtmpfs rw,relatime,size=241948k,nr_inodes=60487,mode=755 0 0 WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it! WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it! No volume groups found WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it! No volume groups found 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo Module Size Used by dm_mod 95622 0 sg 29318 0 i2c_piix4 11776 0 i2c_core 29964 1 i2c_piix4 ext2 68236 1 ext4 378476 0 jbd2 93427 1 ext4 virtio_balloon 4798 0 virtio_pci 7348 0 virtio_net 22438 0 virtio_scsi 10761 1 virtio_blk 7132 0 virtio_console 19089 0 virtio_rng 2816 0 virtio 4977 7 virtio_balloon,virtio_pci,virtio_net,virtio_scsi,virtio_blk,virtio_console,virtio_rng virtio_ring 9115 7 virtio_balloon,virtio_pci,virtio_net,virtio_scsi,virtio_blk,virtio_console,virtio_rng sd_mod 36998 1 sym53c8xx 75810 0 scsi_transport_spi 25447 1 sym53c8xx ata_piix 24409 0 sr_mod 15049 0 cdrom 39085 1 sr_mod mbcache 8193 2 ext2,ext4 crc7 1457 0 crc_ccitt 1717 0 crc_t10dif 1305 1 sd_mod crc_itu_t 1717 0 crc32c_intel 2068 0 libcrc32c 1246 0 Thu Dec 18 21:10:52 SGT 2014 uptime: 2.50 1.11 verbose daemon enabled linux commmand line: panic=1 console=ttyS0 udevtimeout=6000 no_timer_check acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=xterm udevadm settle libguestfs: recv_from_daemon: received GUESTFS_LAUNCH_FLAG libguestfs: [03797ms] appliance is up Guest launched OK. libguestfs: send_to_daemon: 64 bytes: 00 00 00 3c | 20 00 f5 f5 | 00 00 00 04 | 00 00 00 d2 | 00 00 00 00 | ... guestfsd: main_loop: new request, len 0x3c udevadm settle parted -s -- /dev/sda mklabel msdos mkpart primary 128s -128s [ 2.660292] sda: [ 2.672719] sda: sda1 Warning: The resulting partition is not properly aligned for best performance. udevadm settle libguestfs: recv_from_daemon: 40 bytes: 20 00 f5 f5 | 00 00 00 04 | 00 00 00 d2 | 00 00 00 01 | 00 12 34 00 | ... libguestfs: send_to_daemon: 84 bytes: 00 00 00 50 | 20 00 f5 f5 | 00 00 00 04 | 00 00 01 16 | 00 00 00 00 | ... guestfsd: main_loop: proc 210 (part_disk) took 0.21 seconds guestfsd: main_loop: new request, len 0x50 wipefs -a --force /dev/sda1 wipefs: unrecognized option '--force' Usage: wipefs [options] <device> Options: -a, --all wipe all magic strings (BE CAREFUL!) -h, --help this help -n, --no-act everything to be done except for the write() call -o, --offset <num> offset to erase, in bytes -p, --parsable print out in parsable instead of printable format For more information see wipefs(8). wipefs -a /dev/sda1 mke2fs -t ext2 -F /dev/sda1 mke2fs 1.41.12 (17-May-2010) libguestfs: recv_from_daemon: 40 bytes: 20 00 f5 f5 | 00 00 00 04 | 00 00 01 16 | 00 00 00 01 | 00 12 34 01 | ... libguestfs: send_to_daemon: 68 bytes: 00 00 00 40 | 20 00 f5 f5 | 00 00 00 04 | 00 00 00 01 | 00 00 00 00 | ... guestfsd: main_loop: proc 278 (mkfs) took 0.76 seconds guestfsd: main_loop: new request, len 0x40 mount -o /dev/sda1 /sysroot/ libguestfs: recv_from_daemon: 40 bytes: 20 00 f5 f5 | 00 00 00 04 | 00 00 00 01 | 00 00 00 01 | 00 12 34 02 | ... libguestfs: send_to_daemon: 56 bytes: 00 00 00 34 | 20 00 f5 f5 | 00 00 00 04 | 00 00 00 03 | 00 00 00 00 | ... guestfsd: main_loop: proc 1 (mount) took 0.20 seconds guestfsd: main_loop: new request, len 0x34 libguestfs: recv_from_daemon: 40 bytes: 20 00 f5 f5 | 00 00 00 04 | 00 00 00 03 | 00 00 00 01 | 00 12 34 03 | ... libguestfs: send_to_daemon: 44 bytes: 00 00 00 28 | 20 00 f5 f5 | 00 00 00 04 | 00 00 01 1a | 00 00 00 00 | ... guestfsd: main_loop: proc 3 (touch) took 0.00 seconds guestfsd: main_loop: new request, len 0x28 umount /sysroot fsync /dev/sda guestfsd: main_loop: proc 282 (internal_autosync) took 0.05 seconds libguestfs: recv_from_daemon: 40 bytes: 20 00 f5 f5 | 00 00 00 04 | 00 00 01 1a | 00 00 00 01 | 00 12 34 04 | ... libguestfs: sending SIGTERM to process 11826 libguestfs: closing guestfs handle 0x1404740 (state 0) libguestfs: command: run: rm libguestfs: command: run: \ -rf /tmp/libguestfsSD4XN5 ===== TEST FINISHED OK ===== ======================== I did lot of troubleshooting, However, I've created a KVM on another Node which is perfectly worked even I can mount it using guestmount command. and I've migrated it to this Node. Guess what? I can't mount it using guestmount command. Here is the required details. ================ [root@SG01KVM256-01 ~]# rpm -qa | grep libguestfs libguestfs-winsupport-1.0-7.el6.x86_64 libguestfs-1.20.11-11.el6.x86_64 libguestfs-tools-1.20.11-11.el6.x86_64 libguestfs-tools-c-1.20.11-11.el6.x86_64 libguestfs-javadoc-1.20.11-11.el6.x86_64 libguestfs-java-1.20.11-11.el6.x86_64 libguestfs-java-devel-1.20.11-11.el6.x86_64 libguestfs-devel-1.20.11-11.el6.x86_64 [root@SG01KVM256-01 ~]# uname -a Linux SG01KVM256-01.VPSPLAZA.NET 2.6.32-504.3.3.el6.x86_64 #1 SMP Wed Dec 17 01:55:02 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux [root@SG01KVM256-01 ~]# cat /etc/issue CentOS release 6.6 (Final) Kernel \r on an \m ================ If you need server logins, I'm happy to give you.

3 3

[PATCH 0/5] btrfs: add API for btrfs filesystem, check and scrub
by Hu Tao 16 Jan '15

16 Jan '15

Hi, There is one problem: btrfs_filesystem_set_label just doesnt work, giving error message: libguestfs: error: btrfs_filesystem_set_label: /: ERROR: unable to set label Bad address I'm almost sure the patch has no problem, but can't figure out what's the cause. So patch 5 is only for review. Other APIs have no problem. Regards, Hu Hu Tao (5): New API: btrfs_scrub New API: btrfs_check New API: btrfs_filesystem_get_label New API: add btrfs_filesystem_defragment New API: btrfs_filesystem_set_label daemon/btrfs.c | 153 +++++++++++++++++++++++++++++++++++++++++++++++++++ generator/actions.ml | 82 +++++++++++++++++++++++++++ src/MAX_PROC_NR | 2 +- 3 files changed, 236 insertions(+), 1 deletion(-) -- 2.2.1

2 22

Installing Libguestfs
by Priyanka Naik 13 Jan '15

13 Jan '15

I want to transfer files between host and guest. What are the ways to transfer these files? Is libguestfs the only way to transfer files between host and guest? Regards, Priyanka Naik

2 4

[PATCH] Fix out-of-tree build: Don't create empty .y file in builddir
by Hilko Bengen 30 Dec '14

30 Dec '14

--- builder/Makefile.am | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/builder/Makefile.am b/builder/Makefile.am index a0d139b..29f7556 100644 --- a/builder/Makefile.am +++ b/builder/Makefile.am @@ -309,7 +309,7 @@ CLEANFILES += \ if HAVE_OCAML # Automake-generated makefile has a rule ".y.c" but lacks a rule ".y.h". index-parse.h: index-parse.y - touch index-parse.y + touch $(srcdir)/index-parse.y $(MAKE) index-parse.c # Also it doesn't generate dependencies for the C files that include # index-parse.h. -- 2.1.4

2 1

[PATCH] v2v: adding --vdsm-ovf-output option
by Shahar Havivi 25 Dec '14

25 Dec '14

This option is needed by vdsm for writing the ovf to a specific directory. The default is current directory. Bug-Url: https://bugzilla.redhat.com/show_bug.cgi?id=1176598 Signed-off-by: Shahar Havivi <shaharh(a)redhat.com> --- v2v/cmdline.ml | 5 +++++ v2v/output_vdsm.ml | 16 +++++++--------- v2v/output_vdsm.mli | 1 + v2v/test-v2v-o-vdsm-options.sh | 3 --- v2v/virt-v2v.pod | 10 ++++++++-- 5 files changed, 21 insertions(+), 14 deletions(-) diff --git a/v2v/cmdline.ml b/v2v/cmdline.ml index adea40c..489b4e8 100644 --- a/v2v/cmdline.ml +++ b/v2v/cmdline.ml @@ -45,6 +45,7 @@ let parse_cmdline () = let quiet = ref false in let vdsm_image_uuid = ref "" in let vdsm_vm_uuid = ref "" in + let vdsm_ovf_output = ref "." in let verbose = ref false in let trace = ref false in let vmtype = ref "" in @@ -144,6 +145,8 @@ let parse_cmdline () = Arg.String add_vdsm_vol_uuid, "uuid " ^ s_"Output vol UUID(s)"; "--vdsm-vm-uuid", Arg.Set_string vdsm_vm_uuid, "uuid " ^ s_"Output VM UUID"; + "--vdsm-ovf-output", + Arg.Set_string vdsm_ovf_output, " " ^ s_"Output OVF file"; "-v", Arg.Set verbose, " " ^ s_"Enable debugging messages"; "--verbose", Arg.Set verbose, ditto; "-V", Arg.Unit display_version, " " ^ s_"Display version and exit"; @@ -199,6 +202,7 @@ read the man page virt-v2v(1). let vdsm_image_uuid = !vdsm_image_uuid in let vdsm_vol_uuids = List.rev !vdsm_vol_uuids in let vdsm_vm_uuid = !vdsm_vm_uuid in + let vdsm_ovf_output = !vdsm_ovf_output in let verbose = !verbose in let trace = !trace in let vmtype = @@ -320,6 +324,7 @@ read the man page virt-v2v(1). Output_vdsm.image_uuid = vdsm_image_uuid; vol_uuids = vdsm_vol_uuids; vm_uuid = vdsm_vm_uuid; + ovf_output = vdsm_ovf_output; } in Output_vdsm.output_vdsm verbose output_storage vdsm_params vmtype output_alloc in diff --git a/v2v/output_vdsm.ml b/v2v/output_vdsm.ml index 08d3f09..997466b 100644 --- a/v2v/output_vdsm.ml +++ b/v2v/output_vdsm.ml @@ -30,6 +30,7 @@ type vdsm_params = { image_uuid : string; vol_uuids : string list; vm_uuid : string; + ovf_output : string; } class output_vdsm verbose os vdsm_params vmtype output_alloc = @@ -37,11 +38,12 @@ object inherit output verbose method as_options = - sprintf "-o vdsm -os %s --vdsm-image-uuid %s%s --vdsm-vm-uuid %s%s" os + sprintf "-o vdsm -os %s --vdsm-image-uuid %s%s --vdsm-vm-uuid %s --vdsm-ovf-output %s%s" os vdsm_params.image_uuid (String.concat "" (List.map (sprintf " --vdsm-vol-uuid %s") vdsm_params.vol_uuids)) vdsm_params.vm_uuid + vdsm_params.ovf_output (match vmtype with | None -> "" | Some `Server -> " --vmtype server" @@ -59,9 +61,6 @@ object (* Target image directory. *) val mutable image_dir = "" - (* Target metadata directory. *) - val mutable ovf_dir = "" - (* This is called early on in the conversion and lets us choose the * name of the target files that eventually get written by the main * code. @@ -98,13 +97,12 @@ object eprintf "VDSM: image directory: %s\n%!" image_dir; (* Note that VDSM has to create this directory too. *) - ovf_dir <- dd_mp // dd_uuid // "master" // "vms" // vdsm_params.vm_uuid; - if not (is_directory ovf_dir) then + if not (is_directory vdsm_params.ovf_output) then error (f_"OVF (metadata) directory (%s) does not exist or is not a directory") - ovf_dir; + vdsm_params.ovf_output; if verbose then - eprintf "VDSM: OVF (metadata) directory: %s\n%!" ovf_dir; + eprintf "VDSM: OVF (metadata) directory: %s\n%!" vdsm_params.ovf_output; (* The final directory structure should look like this: * /<MP>/<ESD_UUID>/images/<IMAGE_UUID>/ @@ -146,7 +144,7 @@ object vdsm_params.vm_uuid in (* Write it to the metadata file. *) - let file = ovf_dir // vdsm_params.vm_uuid ^ ".ovf" in + let file = vdsm_params.ovf_output // vdsm_params.vm_uuid ^ ".ovf" in let chan = open_out file in doc_to_chan chan ovf; close_out chan diff --git a/v2v/output_vdsm.mli b/v2v/output_vdsm.mli index 56ddf55..3f63191 100644 --- a/v2v/output_vdsm.mli +++ b/v2v/output_vdsm.mli @@ -22,6 +22,7 @@ type vdsm_params = { image_uuid : string; (* --vdsm-image-uuid *) vol_uuids : string list; (* --vdsm-vol-uuid (multiple) *) vm_uuid : string; (* --vdsm-vm-uuid *) + ovf_output : string; (* --vdsm-ovf-output *) } (** Miscellaneous extra command line parameters used by VDSM. *) diff --git a/v2v/test-v2v-o-vdsm-options.sh b/v2v/test-v2v-o-vdsm-options.sh index e5bf764..61a9f5e 100755 --- a/v2v/test-v2v-o-vdsm-options.sh +++ b/v2v/test-v2v-o-vdsm-options.sh @@ -55,9 +55,6 @@ mkdir $d mkdir $d/12345678-1234-1234-1234-123456789abc mkdir $d/12345678-1234-1234-1234-123456789abc/images mkdir $d/12345678-1234-1234-1234-123456789abc/images/IMAGE -mkdir $d/12345678-1234-1234-1234-123456789abc/master -mkdir $d/12345678-1234-1234-1234-123456789abc/master/vms -mkdir $d/12345678-1234-1234-1234-123456789abc/master/vms/VM # The --vdsm-*-uuid options don't actually check that the # parameter is a UUID, which is useful here. diff --git a/v2v/virt-v2v.pod b/v2v/virt-v2v.pod index 05817ef..f17439c 100644 --- a/v2v/virt-v2v.pod +++ b/v2v/virt-v2v.pod @@ -421,8 +421,10 @@ OS which is not in the first VirtIO disk. =item B<--vdsm-vm-uuid> UUID +=item B<--vdsm-ovf-output> + Normally the RHEV output mode chooses random UUIDs for the target -guest. However VDSM needs to control the UUIDs and passes these +guest. However VDSM needs to control the UUIDs and passes these parameters when virt-v2v runs under VDSM control. The parameters control: @@ -439,7 +441,11 @@ is passed once for each guest disk) =item * -the VM and OVF file (I<--vdsm-vm-uuid>). +the OVF file name (I<--vdsm-vm-uuid>). + +=item * + +the OVF output directory (defalut current directory) (I<--vdsm-ovf-output>). =back -- 1.9.3

2 7

Happy Holidays
by Richard W.M. Jones 23 Dec '14

23 Dec '14

I'm off until January 17th, and probably won't answer much email in that time. Happy holidays, Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com Fedora Windows cross-compiler. Compile Windows programs, test, and build Windows installers. Over 100 libraries supported. http://fedoraproject.org/wiki/MinGW

1 0