Move most of the content of either po-docs/ja/Makefile.am or po-docs/uk/Makefile.am to po-docs/language.mk, and use it exclusively instead of the former contents of the languange-specific Makefile.am. This way, either adding a new documentation or enabling a new language will not require copying over the same make code. --- po-docs/ja/Makefile.am | 174 +------------------------------------------- po-docs/language.mk | 191 +++++++++++++++++++++++++++++++++++++++++++++++++ po-docs/uk/Makefile.am | 174 +------------------------------------------- 3 files changed, 195 insertions(+), 344 deletions(-) create mode 100644 po-docs/language.mk diff --git a/po-docs/ja/Makefile.am b/po-docs/ja/Makefile.am index 0f45b11..a6ebec2 100644 --- a/po-docs/ja/Makefile.am +++ b/po-docs/ja/Makefile.am @@ -18,176 +18,6 @@ # Note that each Makefile.am in po-docs/$lang/Makefile.am should be # identical. If you create a new $lang.po, create the $lang/ # subdirectory and copy the Makefile.am from an existing language. +# All the actual logic should be in language.mk. -include $(top_srcdir)/subdir-rules.mk - -LINGUA = $(shell basename -- `pwd`) - -CLEANFILES = *.1 *.3 *.5 - -# Before 1.23.23, the old Perl tools were called *.pl. -CLEANFILES += *.pl - -MANPAGES = \ - guestfish.1 \ - guestfs.3 \ - guestfs-erlang.3 \ - guestfs-examples.3 \ - guestfs-faq.1 \ - guestfs-golang.3 \ - guestfs-java.3 \ - guestfs-lua.3 \ - guestfs-ocaml.3 \ - guestfs-performance.1 \ - guestfs-perl.3 \ - guestfs-python.3 \ - guestfs-recipes.1 \ - guestfs-release-notes.1 \ - guestfs-ruby.3 \ - guestfs-testing.1 \ - guestfsd.8 \ - guestmount.1 \ - guestunmount.1 \ - libguestfs-make-fixed-appliance.1 \ - libguestfs-test-tool.1 \ - libguestfs-tools.conf.5 \ - virt-alignment-scan.1 \ - virt-builder.1 \ - virt-cat.1 \ - virt-copy-in.1 \ - virt-copy-out.1 \ - virt-customize.1 \ - virt-df.1 \ - virt-diff.1 \ - virt-edit.1 \ - virt-filesystems.1 \ - virt-format.1 \ - virt-index-validate.1 \ - virt-inspector.1 \ - virt-list-filesystems.1 \ - virt-list-partitions.1 \ - virt-log.1 \ - virt-ls.1 \ - virt-make-fs.1 \ - virt-p2v.1 \ - virt-p2v-make-disk.1 \ - virt-p2v-make-kickstart.1 \ - virt-rescue.1 \ - virt-resize.1 \ - virt-sparsify.1 \ - virt-sysprep.1 \ - virt-tar.1 \ - virt-tar-in.1 \ - virt-tar-out.1 \ - virt-v2v.1 \ - virt-v2v-test-harness.1 \ - virt-win-reg.1 - -podfiles := $(shell for f in `cat $(top_srcdir)/po-docs/podfiles`; do echo `basename $$f .pod`.pod; done) - -# Ship the POD files and the translated manpages in the tarball. This -# just simplifies building from the tarball, at a small cost in extra -# size. -EXTRA_DIST = \ - $(MANPAGES) \ - $(podfiles) - -all-local: $(MANPAGES) - -guestfs.3: guestfs.pod guestfs-actions.pod guestfs-availability.pod guestfs-structs.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --section 3 \ - --license LGPLv2+ \ - --insert $(srcdir)/guestfs-actions.pod:__ACTIONS__ \ - --insert $(srcdir)/guestfs-availability.pod:__AVAILABILITY__ \ - --insert $(srcdir)/guestfs-structs.pod:__STRUCTS__ \ - $< - -guestfish.1: guestfish.pod guestfish-actions.pod guestfish-commands.pod guestfish-prepopts.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --license GPLv2+ \ - --insert $(srcdir)/guestfish-actions.pod:__ACTIONS__ \ - --insert $(srcdir)/guestfish-commands.pod:__FISH_COMMANDS__ \ - --insert $(srcdir)/guestfish-prepopts.pod:__PREPOPTS__ \ - $< - -virt-builder.1: virt-builder.pod customize-synopsis.pod customize-options.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --license GPLv2+ \ - --insert $(srcdir)/customize-synopsis.pod:__CUSTOMIZE_SYNOPSIS__ \ - --insert $(srcdir)/customize-options.pod:__CUSTOMIZE_OPTIONS__ \ - $< - -virt-customize.1: virt-customize.pod customize-synopsis.pod customize-options.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --license GPLv2+ \ - --insert $(srcdir)/customize-synopsis.pod:__CUSTOMIZE_SYNOPSIS__ \ - --insert $(srcdir)/customize-options.pod:__CUSTOMIZE_OPTIONS__ \ - $< - -virt-sysprep.1: virt-sysprep.pod sysprep-extra-options.pod sysprep-operations.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --license GPLv2+ \ - --insert $(srcdir)/sysprep-extra-options.pod:__EXTRA_OPTIONS__ \ - --insert $(srcdir)/sysprep-operations.pod:__OPERATIONS__ \ - $< - -%.1: %.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - $< - -%.3: %.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --section 3 \ - $< - -%.5: %.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --section 5 \ - $< - -%.8: %.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --section 8 \ - $< - -# If a POD file is missing, the user needs to run make update-po. -# This cannot be done automatically by make because it would be unsafe -# to run po4a or update podfiles potentially in parallel. Therefore -# tell the user what to do and stop. -$(podfiles): - @if ! test -f $@; then \ - echo "***"; \ - echo "*** You need to run the following commands:"; \ - echo "*** rm po-docs/podfiles; make -C po-docs update-po"; \ - echo "*** After that, rerun make."; \ - echo "***"; \ - exit 1; \ - fi - -# XXX Can automake do this properly? -install-data-hook: - $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man1 - $(INSTALL) -m 0644 $(srcdir)/*.1 $(DESTDIR)$(mandir)/$(LINGUA)/man1 - $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man3 - $(INSTALL) -m 0644 $(srcdir)/*.3 $(DESTDIR)$(mandir)/$(LINGUA)/man3 - $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man5 - $(INSTALL) -m 0644 $(srcdir)/*.5 $(DESTDIR)$(mandir)/$(LINGUA)/man5 +include $(srcdir)/../language.mk diff --git a/po-docs/language.mk b/po-docs/language.mk new file mode 100644 index 0000000..d5c9ba2 --- /dev/null +++ b/po-docs/language.mk @@ -0,0 +1,191 @@ +# libguestfs translations of man pages and POD files +# Copyright (C) 2010-2012 Red Hat Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +# Common logic for generating translated documentation. + +include $(top_srcdir)/subdir-rules.mk + +LINGUA = $(shell basename -- `pwd`) + +CLEANFILES = *.1 *.3 *.5 + +# Before 1.23.23, the old Perl tools were called *.pl. +CLEANFILES += *.pl + +MANPAGES = \ + guestfish.1 \ + guestfs.3 \ + guestfs-erlang.3 \ + guestfs-examples.3 \ + guestfs-faq.1 \ + guestfs-golang.3 \ + guestfs-java.3 \ + guestfs-lua.3 \ + guestfs-ocaml.3 \ + guestfs-performance.1 \ + guestfs-perl.3 \ + guestfs-python.3 \ + guestfs-recipes.1 \ + guestfs-release-notes.1 \ + guestfs-ruby.3 \ + guestfs-testing.1 \ + guestfsd.8 \ + guestmount.1 \ + guestunmount.1 \ + libguestfs-make-fixed-appliance.1 \ + libguestfs-test-tool.1 \ + libguestfs-tools.conf.5 \ + virt-alignment-scan.1 \ + virt-builder.1 \ + virt-cat.1 \ + virt-copy-in.1 \ + virt-copy-out.1 \ + virt-customize.1 \ + virt-df.1 \ + virt-diff.1 \ + virt-edit.1 \ + virt-filesystems.1 \ + virt-format.1 \ + virt-index-validate.1 \ + virt-inspector.1 \ + virt-list-filesystems.1 \ + virt-list-partitions.1 \ + virt-log.1 \ + virt-ls.1 \ + virt-make-fs.1 \ + virt-p2v.1 \ + virt-p2v-make-disk.1 \ + virt-p2v-make-kickstart.1 \ + virt-rescue.1 \ + virt-resize.1 \ + virt-sparsify.1 \ + virt-sysprep.1 \ + virt-tar.1 \ + virt-tar-in.1 \ + virt-tar-out.1 \ + virt-v2v.1 \ + virt-v2v-test-harness.1 \ + virt-win-reg.1 + +podfiles := $(shell for f in `cat $(top_srcdir)/po-docs/podfiles`; do echo `basename $$f .pod`.pod; done) + +# Ship the POD files and the translated manpages in the tarball. This +# just simplifies building from the tarball, at a small cost in extra +# size. +EXTRA_DIST = \ + $(MANPAGES) \ + $(podfiles) + +all-local: $(MANPAGES) + +guestfs.3: guestfs.pod guestfs-actions.pod guestfs-availability.pod guestfs-structs.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + --section 3 \ + --license LGPLv2+ \ + --insert $(srcdir)/guestfs-actions.pod:__ACTIONS__ \ + --insert $(srcdir)/guestfs-availability.pod:__AVAILABILITY__ \ + --insert $(srcdir)/guestfs-structs.pod:__STRUCTS__ \ + $< + +guestfish.1: guestfish.pod guestfish-actions.pod guestfish-commands.pod guestfish-prepopts.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + --license GPLv2+ \ + --insert $(srcdir)/guestfish-actions.pod:__ACTIONS__ \ + --insert $(srcdir)/guestfish-commands.pod:__FISH_COMMANDS__ \ + --insert $(srcdir)/guestfish-prepopts.pod:__PREPOPTS__ \ + $< + +virt-builder.1: virt-builder.pod customize-synopsis.pod customize-options.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + --license GPLv2+ \ + --insert $(srcdir)/customize-synopsis.pod:__CUSTOMIZE_SYNOPSIS__ \ + --insert $(srcdir)/customize-options.pod:__CUSTOMIZE_OPTIONS__ \ + $< + +virt-customize.1: virt-customize.pod customize-synopsis.pod customize-options.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + --license GPLv2+ \ + --insert $(srcdir)/customize-synopsis.pod:__CUSTOMIZE_SYNOPSIS__ \ + --insert $(srcdir)/customize-options.pod:__CUSTOMIZE_OPTIONS__ \ + $< + +virt-sysprep.1: virt-sysprep.pod sysprep-extra-options.pod sysprep-operations.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + --license GPLv2+ \ + --insert $(srcdir)/sysprep-extra-options.pod:__EXTRA_OPTIONS__ \ + --insert $(srcdir)/sysprep-operations.pod:__OPERATIONS__ \ + $< + +%.1: %.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + $< + +%.3: %.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + --section 3 \ + $< + +%.5: %.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + --section 5 \ + $< + +%.8: %.pod + $(PODWRAPPER) \ + --no-strict-checks \ + --man $@ \ + --section 8 \ + $< + +# If a POD file is missing, the user needs to run make update-po. +# This cannot be done automatically by make because it would be unsafe +# to run po4a or update podfiles potentially in parallel. Therefore +# tell the user what to do and stop. +$(podfiles): + @if ! test -f $@; then \ + echo "***"; \ + echo "*** You need to run the following commands:"; \ + echo "*** rm po-docs/podfiles; make -C po-docs update-po"; \ + echo "*** After that, rerun make."; \ + echo "***"; \ + exit 1; \ + fi + +# XXX Can automake do this properly? +install-data-hook: + $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man1 + $(INSTALL) -m 0644 $(srcdir)/*.1 $(DESTDIR)$(mandir)/$(LINGUA)/man1 + $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man3 + $(INSTALL) -m 0644 $(srcdir)/*.3 $(DESTDIR)$(mandir)/$(LINGUA)/man3 + $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man5 + $(INSTALL) -m 0644 $(srcdir)/*.5 $(DESTDIR)$(mandir)/$(LINGUA)/man5 diff --git a/po-docs/uk/Makefile.am b/po-docs/uk/Makefile.am index 0f45b11..a6ebec2 100644 --- a/po-docs/uk/Makefile.am +++ b/po-docs/uk/Makefile.am @@ -18,176 +18,6 @@ # Note that each Makefile.am in po-docs/$lang/Makefile.am should be # identical. If you create a new $lang.po, create the $lang/ # subdirectory and copy the Makefile.am from an existing language. +# All the actual logic should be in language.mk. -include $(top_srcdir)/subdir-rules.mk - -LINGUA = $(shell basename -- `pwd`) - -CLEANFILES = *.1 *.3 *.5 - -# Before 1.23.23, the old Perl tools were called *.pl. -CLEANFILES += *.pl - -MANPAGES = \ - guestfish.1 \ - guestfs.3 \ - guestfs-erlang.3 \ - guestfs-examples.3 \ - guestfs-faq.1 \ - guestfs-golang.3 \ - guestfs-java.3 \ - guestfs-lua.3 \ - guestfs-ocaml.3 \ - guestfs-performance.1 \ - guestfs-perl.3 \ - guestfs-python.3 \ - guestfs-recipes.1 \ - guestfs-release-notes.1 \ - guestfs-ruby.3 \ - guestfs-testing.1 \ - guestfsd.8 \ - guestmount.1 \ - guestunmount.1 \ - libguestfs-make-fixed-appliance.1 \ - libguestfs-test-tool.1 \ - libguestfs-tools.conf.5 \ - virt-alignment-scan.1 \ - virt-builder.1 \ - virt-cat.1 \ - virt-copy-in.1 \ - virt-copy-out.1 \ - virt-customize.1 \ - virt-df.1 \ - virt-diff.1 \ - virt-edit.1 \ - virt-filesystems.1 \ - virt-format.1 \ - virt-index-validate.1 \ - virt-inspector.1 \ - virt-list-filesystems.1 \ - virt-list-partitions.1 \ - virt-log.1 \ - virt-ls.1 \ - virt-make-fs.1 \ - virt-p2v.1 \ - virt-p2v-make-disk.1 \ - virt-p2v-make-kickstart.1 \ - virt-rescue.1 \ - virt-resize.1 \ - virt-sparsify.1 \ - virt-sysprep.1 \ - virt-tar.1 \ - virt-tar-in.1 \ - virt-tar-out.1 \ - virt-v2v.1 \ - virt-v2v-test-harness.1 \ - virt-win-reg.1 - -podfiles := $(shell for f in `cat $(top_srcdir)/po-docs/podfiles`; do echo `basename $$f .pod`.pod; done) - -# Ship the POD files and the translated manpages in the tarball. This -# just simplifies building from the tarball, at a small cost in extra -# size. -EXTRA_DIST = \ - $(MANPAGES) \ - $(podfiles) - -all-local: $(MANPAGES) - -guestfs.3: guestfs.pod guestfs-actions.pod guestfs-availability.pod guestfs-structs.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --section 3 \ - --license LGPLv2+ \ - --insert $(srcdir)/guestfs-actions.pod:__ACTIONS__ \ - --insert $(srcdir)/guestfs-availability.pod:__AVAILABILITY__ \ - --insert $(srcdir)/guestfs-structs.pod:__STRUCTS__ \ - $< - -guestfish.1: guestfish.pod guestfish-actions.pod guestfish-commands.pod guestfish-prepopts.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --license GPLv2+ \ - --insert $(srcdir)/guestfish-actions.pod:__ACTIONS__ \ - --insert $(srcdir)/guestfish-commands.pod:__FISH_COMMANDS__ \ - --insert $(srcdir)/guestfish-prepopts.pod:__PREPOPTS__ \ - $< - -virt-builder.1: virt-builder.pod customize-synopsis.pod customize-options.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --license GPLv2+ \ - --insert $(srcdir)/customize-synopsis.pod:__CUSTOMIZE_SYNOPSIS__ \ - --insert $(srcdir)/customize-options.pod:__CUSTOMIZE_OPTIONS__ \ - $< - -virt-customize.1: virt-customize.pod customize-synopsis.pod customize-options.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --license GPLv2+ \ - --insert $(srcdir)/customize-synopsis.pod:__CUSTOMIZE_SYNOPSIS__ \ - --insert $(srcdir)/customize-options.pod:__CUSTOMIZE_OPTIONS__ \ - $< - -virt-sysprep.1: virt-sysprep.pod sysprep-extra-options.pod sysprep-operations.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --license GPLv2+ \ - --insert $(srcdir)/sysprep-extra-options.pod:__EXTRA_OPTIONS__ \ - --insert $(srcdir)/sysprep-operations.pod:__OPERATIONS__ \ - $< - -%.1: %.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - $< - -%.3: %.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --section 3 \ - $< - -%.5: %.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --section 5 \ - $< - -%.8: %.pod - $(PODWRAPPER) \ - --no-strict-checks \ - --man $@ \ - --section 8 \ - $< - -# If a POD file is missing, the user needs to run make update-po. -# This cannot be done automatically by make because it would be unsafe -# to run po4a or update podfiles potentially in parallel. Therefore -# tell the user what to do and stop. -$(podfiles): - @if ! test -f $@; then \ - echo "***"; \ - echo "*** You need to run the following commands:"; \ - echo "*** rm po-docs/podfiles; make -C po-docs update-po"; \ - echo "*** After that, rerun make."; \ - echo "***"; \ - exit 1; \ - fi - -# XXX Can automake do this properly? -install-data-hook: - $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man1 - $(INSTALL) -m 0644 $(srcdir)/*.1 $(DESTDIR)$(mandir)/$(LINGUA)/man1 - $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man3 - $(INSTALL) -m 0644 $(srcdir)/*.3 $(DESTDIR)$(mandir)/$(LINGUA)/man3 - $(MKDIR_P) $(DESTDIR)$(mandir)/$(LINGUA)/man5 - $(INSTALL) -m 0644 $(srcdir)/*.5 $(DESTDIR)$(mandir)/$(LINGUA)/man5 +include $(srcdir)/../language.mk -- 2.1.0