[Libguestfs] IRC question: qemu-system-arm: -machine accel=kvm:tcg: No machine specified, and there is no default
13:57 < soko> hello. i am getting an error on launch when i set-hv to an arm system.
the error appears to be caused by no default machine. here is a log
https://pastebin.com/CUBcnG44
13:59 < soko> the default hv works (launch, mount, etc) but fails to emulate (sh,
command, etc) the binaries on the fs
14:17 < soko> if i upload qemu-arm-static and then command it works, but seems like
changing the hv should work in a more clean way. any advice is appreciated!
The error from the pastebin is:
[00038ms] /usr/local/bin/qemu-system-arm \
-global virtio-blk-pci.scsi=off \
-enable-fips \
-nodefaults \
-display none \
-machine accel=kvm:tcg \
-m 500 \
-no-reboot \
-rtc driftfix=slew \
-global kvm-pit.lost_tick_policy=discard \
-kernel /var/tmp/.guestfs-0/appliance.d/kernel \
-initrd /var/tmp/.guestfs-0/appliance.d/initrd \
-drive
file=/opt/kore_dtf/dropthefw/build_directory/5/rootfs.raw,cache=writeback,id=hd0,if=none
\
-device virtio-blk-pci,drive=hd0 \
-drive
file=/var/tmp/.guestfs-0/appliance.d/root,snapshot=on,id=appliance,cache=unsafe,if=none \
-device virtio-blk-pci,drive=appliance \
-device virtio-serial-pci \
-serial stdio \
-chardev socket,path=/tmp/libguestfsxlkp01/guestfsd.sock,id=channel0 \
-device virtserialport,chardev=channel0,name=org.libguestfs.channel.0 \
-append 'panic=1 console=ttyS0 udevtimeout=6000 udev.event-timeout=6000
no_timer_check lpj=8333313 acpi=off printk.time=1 cgroup_disable=memory root=/dev/vdb
selinux=0 guestfs_verbose=1 TERM=xterm'
qemu-system-arm: -machine accel=kvm:tcg: No machine specified, and there is no default
Actually what's happening here is that soko is trying to do all of
this on an x86_64 host. Unfortunately that won't work, because the
appliance that is built is for x86_64 so it cannot run on top of
qemu-system-arm. But also (for basic file access) it's not necessary
either, just use qemu-system-x86_64.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine. Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/