[Libguestfs] [PATCH 4/6] generator: Move version first added to generator.

This change was generated automatically using the following Perl script, with a few hand corrections afterwards. use strict; my %map; open ADDED, "src/api-support/added" or die "added: $!"; while (<ADDED>) { chomp; if (/^guestfs_(.*)_(argv|va|opts) /) { # ignore _argv, _va, _opts entries. } elsif (/^guestfs_(compare|copy)_/) { # ignore guestfs_compare_*, guestfs_copy_* struct functions. } elsif (/^guestfs_(.*) [01]\.(\d+)\.(\d+)$/) { $map{$1} = [1, $2, $3]; } elsif (/^guestfs_(.*) 0\.(\d+)$/) { $map{$1} = [0, 0, $2]; } else { die "cannot parse line: `$_'\n" } } close ADDED; open ACTIONS, "generator/actions.ml" or die "actions.ml: $!"; open ACTIONS_OUT, ">generator/actions.ml.out" or die "actions.ml.out: $!"; while (<ACTIONS>) { chomp; if (/name = "(.*)";$/ && exists $map{$1}) { my @v = @{$map{$1}}; $_ .= sprintf (" added = (%d, %d, %d);", $v[0], $v[1], $v[2]) ; delete $map{$1}; } print ACTIONS_OUT "$_\n"; } close ACTIONS_OUT; close ACTIONS; --- generator/actions.ml | 1138 +++++++++++++++++++++++++------------------------- 1 file changed, 569 insertions(+), 569 deletions(-) diff --git a/generator/actions.ml b/generator/actions.ml index 0b93224..613a2da 100644 --- a/generator/actions.ml +++ b/generator/actions.ml @@ -198,7 +198,7 @@ C<guestfs_internal_test_set_output>. You probably don't want to call this function." }; { defaults with - name = "launch"; + name = "launch"; added = (0, 0, 3); style = RErr, [], []; fish_alias = ["run"]; progress = true; config_only = true; shortdesc = "launch the backend"; @@ -212,7 +212,7 @@ behaviour when you do this is not well defined. Handles are very cheap to create, so create a new one for each launch." }; { defaults with - name = "wait_ready"; + name = "wait_ready"; added = (0, 0, 3); style = RErr, [], []; visibility = VStateTest; deprecated_by = Some "launch"; @@ -231,7 +231,7 @@ remove them, unless you want to retain compatibility with older versions of the API." }; { defaults with - name = "kill_subprocess"; + name = "kill_subprocess"; added = (0, 0, 3); style = RErr, [], []; deprecated_by = Some "shutdown"; shortdesc = "kill the hypervisor"; @@ -241,7 +241,7 @@ This kills the hypervisor. Do not call this. See: C<guestfs_shutdown> instead." }; { defaults with - name = "add_cdrom"; + name = "add_cdrom"; added = (0, 0, 3); style = RErr, [String "filename"], []; deprecated_by = Some "add_drive_ro"; config_only = true; blocking = false; @@ -253,7 +253,7 @@ The image is added as read-only drive, so this function is equivalent of C<guestfs_add_drive_ro>." }; { defaults with - name = "add_drive_ro"; + name = "add_drive_ro"; added = (1, 0, 38); style = RErr, [String "filename"], []; fish_alias = ["add-ro"]; config_only = true; blocking = false; @@ -265,7 +265,7 @@ so the disk is added read-only, with the format being detected automatically." }; { defaults with - name = "config"; + name = "config"; added = (0, 0, 3); style = RErr, [String "hvparam"; OptString "hvvalue"], []; config_only = true; blocking = false; @@ -281,7 +281,7 @@ The first character of C<hvparam> string must be a C<-> (dash). C<hvvalue> can be NULL." }; { defaults with - name = "set_qemu"; + name = "set_qemu"; added = (1, 0, 6); style = RErr, [OptString "hv"], []; fish_alias = ["qemu"]; config_only = true; blocking = false; @@ -307,7 +307,7 @@ variable C<LIBGUESTFS_HV> is safest of all since that picks the qemu binary at the same time as the handle is created." }; { defaults with - name = "get_qemu"; + name = "get_qemu"; added = (1, 0, 6); style = RConstString "hv", [], []; blocking = false; deprecated_by = Some "get_hv"; @@ -323,7 +323,7 @@ This is always non-NULL. If it wasn't set already, then this will return the default qemu binary name." }; { defaults with - name = "set_hv"; + name = "set_hv"; added = (1, 23, 17); style = RErr, [String "hv"], []; fish_alias = ["hv"]; config_only = true; blocking = false; @@ -349,7 +349,7 @@ variable C<LIBGUESTFS_HV> is safest of all since that picks the qemu binary at the same time as the handle is created." }; { defaults with - name = "get_hv"; + name = "get_hv"; added = (1, 23, 17); style = RString "hv", [], []; blocking = false; tests = [ @@ -364,7 +364,7 @@ This is always non-NULL. If it wasn't set already, then this will return the default qemu binary name." }; { defaults with - name = "set_path"; + name = "set_path"; added = (0, 0, 3); style = RErr, [OptString "searchpath"], []; fish_alias = ["path"]; config_only = true; blocking = false; @@ -378,7 +378,7 @@ C<LIBGUESTFS_PATH> environment variable. Setting C<path> to C<NULL> restores the default path." }; { defaults with - name = "get_path"; + name = "get_path"; added = (0, 0, 3); style = RConstString "path", [], []; blocking = false; tests = [ @@ -393,7 +393,7 @@ This is always non-NULL. If it wasn't set already, then this will return the default path." }; { defaults with - name = "set_append"; + name = "set_append"; added = (1, 0, 26); style = RErr, [OptString "append"], []; fish_alias = ["append"]; config_only = true; blocking = false; @@ -409,7 +409,7 @@ Setting C<append> to C<NULL> means I<no> additional options are passed (libguestfs always adds a few of its own)." }; { defaults with - name = "get_append"; + name = "get_append"; added = (1, 0, 26); style = RConstOptString "append", [], []; blocking = false; (* This cannot be tested with the current framework. The @@ -424,7 +424,7 @@ libguestfs appliance kernel command line. If C<NULL> then no options are added." }; { defaults with - name = "set_autosync"; + name = "set_autosync"; added = (0, 0, 3); style = RErr, [Bool "autosync"], []; fish_alias = ["autosync"]; blocking = false; @@ -439,7 +439,7 @@ This is enabled by default (since libguestfs 1.5.24, previously it was disabled by default)." }; { defaults with - name = "get_autosync"; + name = "get_autosync"; added = (0, 0, 3); style = RBool "autosync", [], []; blocking = false; tests = [ @@ -451,7 +451,7 @@ disabled by default)." }; Get the autosync flag." }; { defaults with - name = "set_verbose"; + name = "set_verbose"; added = (0, 0, 3); style = RErr, [Bool "verbose"], []; fish_alias = ["verbose"]; blocking = false; @@ -467,7 +467,7 @@ register a callback to send them somewhere else (see C<guestfs_set_event_callback>)." }; { defaults with - name = "get_verbose"; + name = "get_verbose"; added = (0, 0, 3); style = RBool "verbose", [], []; blocking = false; shortdesc = "get verbose mode"; @@ -475,7 +475,7 @@ C<guestfs_set_event_callback>)." }; This returns the verbose messages flag." }; { defaults with - name = "is_ready"; + name = "is_ready"; added = (1, 0, 2); style = RBool "ready", [], []; visibility = VStateTest; blocking = false; @@ -491,7 +491,7 @@ This returns true iff this handle is ready to accept commands For more information on states, see L<guestfs(3)>." }; { defaults with - name = "is_config"; + name = "is_config"; added = (1, 0, 2); style = RBool "config", [], []; blocking = false; tests = [ @@ -506,7 +506,7 @@ This returns true iff this handle is being configured For more information on states, see L<guestfs(3)>." }; { defaults with - name = "is_launching"; + name = "is_launching"; added = (1, 0, 2); style = RBool "launching", [], []; visibility = VStateTest; blocking = false; @@ -522,7 +522,7 @@ This returns true iff this handle is launching the subprocess For more information on states, see L<guestfs(3)>." }; { defaults with - name = "is_busy"; + name = "is_busy"; added = (1, 0, 2); style = RBool "busy", [], []; visibility = VStateTest; blocking = false; @@ -538,7 +538,7 @@ replacement. Do not use this function. For more information on states, see L<guestfs(3)>." }; { defaults with - name = "get_state"; + name = "get_state"; added = (1, 0, 2); style = RInt "state", [], []; visibility = VStateTest; blocking = false; @@ -550,7 +550,7 @@ only useful for printing debug and internal error messages. For more information on states, see L<guestfs(3)>." }; { defaults with - name = "set_memsize"; + name = "set_memsize"; added = (1, 0, 55); style = RErr, [Int "memsize"], []; fish_alias = ["memsize"]; config_only = true; blocking = false; @@ -568,7 +568,7 @@ For more information on the architecture of libguestfs, see L<guestfs(3)>." }; { defaults with - name = "get_memsize"; + name = "get_memsize"; added = (1, 0, 55); style = RInt "memsize", [], []; blocking = false; tests = [ @@ -588,7 +588,7 @@ For more information on the architecture of libguestfs, see L<guestfs(3)>." }; { defaults with - name = "get_pid"; + name = "get_pid"; added = (1, 0, 56); style = RInt "pid", [], []; fish_alias = ["pid"]; blocking = false; @@ -600,7 +600,7 @@ hypervisor running, then this will return an error. This is an internal call used for debugging and testing." }; { defaults with - name = "version"; + name = "version"; added = (1, 0, 58); style = RStruct ("version", "version"), [], []; blocking = false; tests = [ @@ -641,7 +641,7 @@ making this an unreliable way to test for features. Use C<guestfs_available> or C<guestfs_feature_available> instead." }; { defaults with - name = "set_selinux"; + name = "set_selinux"; added = (1, 0, 67); style = RErr, [Bool "selinux"], []; fish_alias = ["selinux"]; config_only = true; blocking = false; @@ -657,7 +657,7 @@ For more information on the architecture of libguestfs, see L<guestfs(3)>." }; { defaults with - name = "get_selinux"; + name = "get_selinux"; added = (1, 0, 67); style = RBool "selinux", [], []; blocking = false; shortdesc = "get SELinux enabled flag"; @@ -669,7 +669,7 @@ For more information on the architecture of libguestfs, see L<guestfs(3)>." }; { defaults with - name = "set_trace"; + name = "set_trace"; added = (1, 0, 69); style = RErr, [Bool "trace"], []; fish_alias = ["trace"]; blocking = false; @@ -695,7 +695,7 @@ register a callback to send them somewhere else (see C<guestfs_set_event_callback>)." }; { defaults with - name = "get_trace"; + name = "get_trace"; added = (1, 0, 69); style = RBool "trace", [], []; blocking = false; shortdesc = "get command trace enabled flag"; @@ -703,7 +703,7 @@ C<guestfs_set_event_callback>)." }; Return the command trace flag." }; { defaults with - name = "set_direct"; + name = "set_direct"; added = (1, 0, 72); style = RErr, [Bool "direct"], []; fish_alias = ["direct"]; config_only = true; blocking = false; @@ -723,7 +723,7 @@ are doing. The default is disabled." }; { defaults with - name = "get_direct"; + name = "get_direct"; added = (1, 0, 72); style = RBool "direct", [], []; blocking = false; shortdesc = "get direct appliance mode flag"; @@ -731,7 +731,7 @@ The default is disabled." }; Return the direct appliance mode flag." }; { defaults with - name = "set_recovery_proc"; + name = "set_recovery_proc"; added = (1, 0, 77); style = RErr, [Bool "recoveryproc"], []; fish_alias = ["recovery-proc"]; config_only = true; blocking = false; @@ -752,7 +752,7 @@ thinks that the main program has disappeared and so kills the hypervisor, which is not very helpful." }; { defaults with - name = "get_recovery_proc"; + name = "get_recovery_proc"; added = (1, 0, 77); style = RBool "recoveryproc", [], []; blocking = false; shortdesc = "get recovery process enabled flag"; @@ -760,7 +760,7 @@ the hypervisor, which is not very helpful." }; Return the recovery process enabled flag." }; { defaults with - name = "add_drive_with_if"; + name = "add_drive_with_if"; added = (1, 0, 84); style = RErr, [String "filename"; String "iface"], []; deprecated_by = Some "add_drive"; config_only = true; blocking = false; @@ -770,7 +770,7 @@ This is the same as C<guestfs_add_drive> but it allows you to specify the QEMU interface emulation to use at run time." }; { defaults with - name = "add_drive_ro_with_if"; + name = "add_drive_ro_with_if"; added = (1, 0, 84); style = RErr, [String "filename"; String "iface"], []; blocking = false; deprecated_by = Some "add_drive"; config_only = true; @@ -780,7 +780,7 @@ This is the same as C<guestfs_add_drive_ro> but it allows you to specify the QEMU interface emulation to use at run time." }; { defaults with - name = "file_architecture"; + name = "file_architecture"; added = (1, 5, 3); style = RString "arch", [Pathname "filename"], []; tests = [ InitISOFS, Always, TestResultString ( @@ -932,7 +932,7 @@ initrd or kernel module(s) instead. =back" }; { defaults with - name = "inspect_os"; + name = "inspect_os"; added = (1, 5, 3); style = RStringList "roots", [], []; shortdesc = "inspect disk and return list of operating systems found"; longdesc = "\ @@ -969,7 +969,7 @@ Please read L<guestfs(3)/INSPECTION> for more details. See also C<guestfs_list_filesystems>." }; { defaults with - name = "inspect_get_type"; + name = "inspect_get_type"; added = (1, 5, 3); style = RString "name", [Mountable "root"], []; shortdesc = "get type of inspected operating system"; longdesc = "\ @@ -1022,7 +1022,7 @@ The caller should be prepared to handle any string. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_arch"; + name = "inspect_get_arch"; added = (1, 5, 3); style = RString "arch", [Mountable "root"], []; shortdesc = "get architecture of inspected operating system"; longdesc = "\ @@ -1036,7 +1036,7 @@ string C<unknown> is returned. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_distro"; + name = "inspect_get_distro"; added = (1, 5, 3); style = RString "distro", [Mountable "root"], []; shortdesc = "get distro of inspected operating system"; longdesc = "\ @@ -1168,7 +1168,7 @@ The caller should be prepared to handle any string. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_major_version"; + name = "inspect_get_major_version"; added = (1, 5, 3); style = RInt "major", [Mountable "root"], []; shortdesc = "get major version of inspected operating system"; longdesc = "\ @@ -1187,7 +1187,7 @@ If the version could not be determined, then C<0> is returned. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_minor_version"; + name = "inspect_get_minor_version"; added = (1, 5, 3); style = RInt "minor", [Mountable "root"], []; shortdesc = "get minor version of inspected operating system"; longdesc = "\ @@ -1200,7 +1200,7 @@ Please read L<guestfs(3)/INSPECTION> for more details. See also C<guestfs_inspect_get_major_version>." }; { defaults with - name = "inspect_get_product_name"; + name = "inspect_get_product_name"; added = (1, 5, 3); style = RString "product", [Mountable "root"], []; shortdesc = "get product name of inspected operating system"; longdesc = "\ @@ -1215,7 +1215,7 @@ string C<unknown> is returned. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_mountpoints"; + name = "inspect_get_mountpoints"; added = (1, 5, 3); style = RHashtable "mountpoints", [Mountable "root"], []; shortdesc = "get mountpoints of inspected operating system"; longdesc = "\ @@ -1246,7 +1246,7 @@ Please read L<guestfs(3)/INSPECTION> for more details. See also C<guestfs_inspect_get_filesystems>." }; { defaults with - name = "inspect_get_filesystems"; + name = "inspect_get_filesystems"; added = (1, 5, 3); style = RStringList "filesystems", [Mountable "root"], []; shortdesc = "get filesystems associated with inspected operating system"; longdesc = "\ @@ -1262,7 +1262,7 @@ Please read L<guestfs(3)/INSPECTION> for more details. See also C<guestfs_inspect_get_mountpoints>." }; { defaults with - name = "set_network"; + name = "set_network"; added = (1, 5, 4); style = RErr, [Bool "network"], []; fish_alias = ["network"]; config_only = true; blocking = false; @@ -1278,7 +1278,7 @@ You must call this before calling C<guestfs_launch>, otherwise it has no effect." }; { defaults with - name = "get_network"; + name = "get_network"; added = (1, 5, 4); style = RBool "network", [], []; blocking = false; shortdesc = "get enable network flag"; @@ -1286,7 +1286,7 @@ it has no effect." }; This returns the enable network flag." }; { defaults with - name = "list_filesystems"; + name = "list_filesystems"; added = (1, 5, 15); style = RHashtable "fses", [], []; shortdesc = "list filesystems"; longdesc = "\ @@ -1323,7 +1323,7 @@ not all belong to a single logical operating system (use C<guestfs_inspect_os> to look for OSes)." }; { defaults with - name = "add_drive"; + name = "add_drive"; added = (0, 0, 3); style = RErr, [String "filename"], [OBool "readonly"; OString "format"; OString "iface"; OString "name"; OString "label"; OString "protocol"; OStringList "server"; OString "username"; OString "secret"; OString "cachemode"; OString "discard"; OBool "copyonread"]; once_had_no_optargs = true; blocking = false; @@ -1584,7 +1584,7 @@ The default is false. =back" }; { defaults with - name = "inspect_get_windows_systemroot"; + name = "inspect_get_windows_systemroot"; added = (1, 5, 25); style = RString "systemroot", [Mountable "root"], []; shortdesc = "get Windows systemroot of inspected operating system"; longdesc = "\ @@ -1598,7 +1598,7 @@ the case then an error is returned. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_roots"; + name = "inspect_get_roots"; added = (1, 7, 3); style = RStringList "roots", [], []; shortdesc = "return list of operating systems found by last inspection"; longdesc = "\ @@ -1612,7 +1612,7 @@ found or the caller has not called C<guestfs_inspect_os>. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "debug_drives"; + name = "debug_drives"; added = (1, 13, 22); style = RStringList "cmdline", [], []; visibility = VDebug; blocking = false; @@ -1622,7 +1622,7 @@ This returns the internal list of drives. 'debug' commands are not part of the formal API and can be removed or changed at any time." }; { defaults with - name = "add_domain"; + name = "add_domain"; added = (1, 7, 4); style = RInt "nrdisks", [String "dom"], [OString "libvirturi"; OBool "readonly"; OString "iface"; OBool "live"; OBool "allowuuid"; OString "readonlydisk"; OString "cachemode"; OString "discard"; OBool "copyonread"]; fish_alias = ["domain"]; config_only = true; shortdesc = "add the disk(s) from a named libvirt domain"; @@ -1712,7 +1712,7 @@ The other optional parameters are passed directly through to C<guestfs_add_drive_opts>." }; { defaults with - name = "add_libvirt_dom"; + name = "add_libvirt_dom"; added = (1, 29, 14); style = RInt "nrdisks", [Pointer ("virDomainPtr", "dom")], [OBool "readonly"; OString "iface"; OBool "live"; OString "readonlydisk"; OString "cachemode"; OString "discard"; OBool "copyonread"]; config_only = true; shortdesc = "add the disk(s) from a libvirt domain"; @@ -1751,7 +1751,7 @@ The other optional parameters are passed directly through to C<guestfs_add_drive_opts>." }; { defaults with - name = "inspect_get_package_format"; + name = "inspect_get_package_format"; added = (1, 7, 5); style = RString "packageformat", [Mountable "root"], []; shortdesc = "get package format used by the operating system"; longdesc = "\ @@ -1772,7 +1772,7 @@ Future versions of libguestfs may return other strings. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_package_management"; + name = "inspect_get_package_management"; added = (1, 7, 5); style = RString "packagemanagement", [Mountable "root"], []; shortdesc = "get package management tool used by the operating system"; longdesc = "\ @@ -1794,7 +1794,7 @@ Future versions of libguestfs may return other strings. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_list_applications"; + name = "inspect_list_applications"; added = (1, 7, 8); style = RStructList ("applications", "application"), [Mountable "root"], []; deprecated_by = Some "inspect_list_applications2"; shortdesc = "get list of applications installed in the operating system"; @@ -1892,7 +1892,7 @@ If unavailable this is returned as an empty string C<\"\">. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_list_applications2"; + name = "inspect_list_applications2"; added = (1, 19, 56); style = RStructList ("applications2", "application2"), [Mountable "root"], []; shortdesc = "get list of applications installed in the operating system"; longdesc = "\ @@ -1995,7 +1995,7 @@ If unavailable this is returned as an empty string C<\"\">. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_hostname"; + name = "inspect_get_hostname"; added = (1, 7, 9); style = RString "hostname", [Mountable "root"], []; shortdesc = "get hostname of the operating system"; longdesc = "\ @@ -2008,7 +2008,7 @@ string C<unknown> is returned. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_format"; + name = "inspect_get_format"; added = (1, 9, 4); style = RString "format", [Mountable "root"], []; shortdesc = "get format of inspected operating system"; longdesc = "\ @@ -2040,7 +2040,7 @@ The caller should be prepared to handle any string. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_is_live"; + name = "inspect_is_live"; added = (1, 9, 4); style = RBool "live", [Mountable "root"], []; shortdesc = "get live flag for install disk"; longdesc = "\ @@ -2051,7 +2051,7 @@ was detected on the disk. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_is_netinst"; + name = "inspect_is_netinst"; added = (1, 9, 4); style = RBool "netinst", [Mountable "root"], []; shortdesc = "get netinst (network installer) flag for install disk"; longdesc = "\ @@ -2064,7 +2064,7 @@ the install. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_is_multipart"; + name = "inspect_is_multipart"; added = (1, 9, 4); style = RBool "multipart", [Mountable "root"], []; shortdesc = "get multipart flag for install disk"; longdesc = "\ @@ -2075,7 +2075,7 @@ part of a set. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "set_attach_method"; + name = "set_attach_method"; added = (1, 9, 8); style = RErr, [String "backend"], []; fish_alias = ["attach-method"]; config_only = true; blocking = false; @@ -2088,7 +2088,7 @@ guestfsd daemon. See L<guestfs(3)/BACKEND>." }; { defaults with - name = "get_attach_method"; + name = "get_attach_method"; added = (1, 9, 8); style = RString "backend", [], []; blocking = false; deprecated_by = Some "get_backend"; @@ -2103,7 +2103,7 @@ Return the current backend. See C<guestfs_set_backend> and L<guestfs(3)/BACKEND>." }; { defaults with - name = "set_backend"; + name = "set_backend"; added = (1, 21, 26); style = RErr, [String "backend"], []; fish_alias = ["backend"]; config_only = true; blocking = false; @@ -2117,7 +2117,7 @@ This handle property was previously called the \"attach method\". See L<guestfs(3)/BACKEND>." }; { defaults with - name = "get_backend"; + name = "get_backend"; added = (1, 21, 26); style = RString "backend", [], []; blocking = false; tests = [ @@ -2133,7 +2133,7 @@ This handle property was previously called the \"attach method\". See C<guestfs_set_backend> and L<guestfs(3)/BACKEND>." }; { defaults with - name = "inspect_get_product_variant"; + name = "inspect_get_product_variant"; added = (1, 9, 13); style = RString "variant", [Mountable "root"], []; shortdesc = "get product variant of inspected operating system"; longdesc = "\ @@ -2161,7 +2161,7 @@ See also C<guestfs_inspect_get_product_name>, C<guestfs_inspect_get_major_version>." }; { defaults with - name = "inspect_get_windows_current_control_set"; + name = "inspect_get_windows_current_control_set"; added = (1, 9, 17); style = RString "controlset", [Mountable "root"], []; shortdesc = "get Windows CurrentControlSet of inspected operating system"; longdesc = "\ @@ -2175,7 +2175,7 @@ the case then an error is returned. Please read L<guestfs(3)/INSPECTION> for more details." }; { defaults with - name = "inspect_get_drive_mappings"; + name = "inspect_get_drive_mappings"; added = (1, 9, 17); style = RHashtable "drives", [Mountable "root"], []; shortdesc = "get drive letter mappings"; longdesc = "\ @@ -2209,7 +2209,7 @@ See also C<guestfs_inspect_get_mountpoints>, C<guestfs_inspect_get_filesystems>." }; { defaults with - name = "inspect_get_icon"; + name = "inspect_get_icon"; added = (1, 11, 12); style = RBufferOut "icon", [Mountable "root"], [OBool "favicon"; OBool "highquality"]; shortdesc = "get the icon corresponding to this operating system"; longdesc = "\ @@ -2274,7 +2274,7 @@ advice before using trademarks in applications. =back" }; { defaults with - name = "set_pgroup"; + name = "set_pgroup"; added = (1, 11, 18); style = RErr, [Bool "pgroup"], []; fish_alias = ["pgroup"]; config_only = true; blocking = false; @@ -2292,7 +2292,7 @@ true when used interactively, so that C<^C> can cancel long-running commands gracefully (see C<guestfs_user_cancel>)." }; { defaults with - name = "get_pgroup"; + name = "get_pgroup"; added = (1, 11, 18); style = RBool "pgroup", [], []; blocking = false; shortdesc = "get process group flag"; @@ -2300,7 +2300,7 @@ long-running commands gracefully (see C<guestfs_user_cancel>)." }; This returns the process group flag." }; { defaults with - name = "set_smp"; + name = "set_smp"; added = (1, 13, 15); style = RErr, [Int "smp"], []; fish_alias = ["smp"]; config_only = true; blocking = false; @@ -2313,7 +2313,7 @@ often it has no effect. This function must be called before C<guestfs_launch>." }; { defaults with - name = "get_smp"; + name = "get_smp"; added = (1, 13, 15); style = RInt "smp", [], []; blocking = false; shortdesc = "get number of virtual CPUs in appliance"; @@ -2321,7 +2321,7 @@ This function must be called before C<guestfs_launch>." }; This returns the number of virtual CPUs assigned to the appliance." }; { defaults with - name = "mount_local"; + name = "mount_local"; added = (1, 17, 22); style = RErr, [String "localmountpoint"], [OBool "readonly"; OString "options"; OInt "cachetimeout"; OBool "debugcalls"]; shortdesc = "mount on the local filesystem"; longdesc = "\ @@ -2350,7 +2350,7 @@ have to call C<guestfs_mount_local_run> to run the main loop. See L<guestfs(3)/MOUNT LOCAL> for full documentation." }; { defaults with - name = "mount_local_run"; + name = "mount_local_run"; added = (1, 17, 22); style = RErr, [], []; cancellable = true (* in a future version *); shortdesc = "run main loop of mount on the local filesystem"; @@ -2373,7 +2373,7 @@ L<guestfs(3)/MULTIPLE HANDLES AND MULTIPLE THREADS>). See L<guestfs(3)/MOUNT LOCAL> for full documentation." }; { defaults with - name = "umount_local"; + name = "umount_local"; added = (1, 17, 22); style = RErr, [], [OBool "retry"]; test_excuse = "tests in fuse subdirectory"; shortdesc = "unmount a locally mounted filesystem"; @@ -2384,7 +2384,7 @@ mountpoint, then this unmounts it. See L<guestfs(3)/MOUNT LOCAL> for full documentation." }; { defaults with - name = "max_disks"; + name = "max_disks"; added = (1, 19, 7); style = RInt "disks", [], []; blocking = false; shortdesc = "maximum number of disks that may be added"; @@ -2399,7 +2399,7 @@ See L<guestfs(3)/MAXIMUM NUMBER OF DISKS> for additional information on this topic." }; { defaults with - name = "canonical_device_name"; + name = "canonical_device_name"; added = (1, 19, 7); style = RString "canonical", [String "device"], []; shortdesc = "return canonical device name"; longdesc = "\ @@ -2428,7 +2428,7 @@ Converted to C</dev/VG/LV> form using C<guestfs_lvm_canonical_lv_name>. Other strings are returned unmodified." }; { defaults with - name = "shutdown"; + name = "shutdown"; added = (1, 19, 16); style = RErr, [], []; shortdesc = "shutdown the hypervisor"; longdesc = "\ @@ -2449,7 +2449,7 @@ C<guestfs_close> will call this if you don't do it explicitly, but note that any errors are ignored in that case." }; { defaults with - name = "cat"; + name = "cat"; added = (0, 0, 4); style = RString "content", [Pathname "path"], []; tests = [ InitISOFS, Always, TestResultString ( @@ -2465,7 +2465,7 @@ end of string. To handle binary files, use the C<guestfs_read_file> or C<guestfs_download> functions." }; { defaults with - name = "find"; + name = "find"; added = (1, 0, 27); style = RStringList "names", [Pathname "directory"], []; tests = [ InitBasicFS, Always, TestResult ( @@ -2511,7 +2511,7 @@ an error. The returned list is sorted." }; { defaults with - name = "read_file"; + name = "read_file"; added = (1, 0, 63); style = RBufferOut "content", [Pathname "path"], []; tests = [ InitISOFS, Always, TestResult ( @@ -2527,7 +2527,7 @@ Unlike C<guestfs_cat>, this function can correctly handle files that contain embedded ASCII NUL characters." }; { defaults with - name = "read_lines"; + name = "read_lines"; added = (0, 0, 7); style = RStringList "lines", [Pathname "path"], []; tests = [ InitISOFS, Always, TestResult ( @@ -2582,7 +2582,7 @@ as end of string). For those you need to use the C<guestfs_read_file> function and split the buffer into lines yourself." }; { defaults with - name = "write"; + name = "write"; added = (1, 3, 14); style = RErr, [Pathname "path"; BufferIn "content"], []; tests = [ InitScratchFS, Always, TestResultString ( @@ -2612,7 +2612,7 @@ file is the string C<content> (which can contain any 8 bit data). See also C<guestfs_write_append>." }; { defaults with - name = "write_append"; + name = "write_append"; added = (1, 11, 18); style = RErr, [Pathname "path"; BufferIn "content"], []; tests = [ InitScratchFS, Always, TestResultString ( @@ -2630,7 +2630,7 @@ C<path> does not exist, then a new file is created. See also C<guestfs_write>." }; { defaults with - name = "lstatlist"; + name = "lstatlist"; added = (1, 0, 77); style = RStructList ("statbufs", "stat"), [Pathname "path"; StringList "names"], []; deprecated_by = Some "lstatnslist"; shortdesc = "lstat on multiple files"; @@ -2650,7 +2650,7 @@ See also C<guestfs_lxattrlist> for a similarly efficient call for getting extended attributes." }; { defaults with - name = "lstatnslist"; + name = "lstatnslist"; added = (1, 27, 53); style = RStructList ("statbufs", "statns"), [Pathname "path"; StringList "names"], []; shortdesc = "lstat on multiple files"; longdesc = "\ @@ -2669,7 +2669,7 @@ See also C<guestfs_lxattrlist> for a similarly efficient call for getting extended attributes." }; { defaults with - name = "lxattrlist"; + name = "lxattrlist"; added = (1, 0, 77); style = RStructList ("xattrs", "xattr"), [Pathname "path"; StringList "names"], []; optional = Some "linuxxattrs"; shortdesc = "lgetxattr on multiple files"; @@ -2694,7 +2694,7 @@ See also C<guestfs_lstatlist> for a similarly efficient call for getting standard stats." }; { defaults with - name = "readlinklist"; + name = "readlinklist"; added = (1, 0, 77); style = RStringList "links", [Pathname "path"; StringList "names"], []; shortdesc = "readlink on multiple files"; longdesc = "\ @@ -2717,7 +2717,7 @@ This call is intended for programs that want to efficiently list a directory contents without making many round-trips." }; { defaults with - name = "ls"; + name = "ls"; added = (0, 0, 4); style = RStringList "listing", [Pathname "directory"], []; tests = [ InitScratchFS, Always, TestResult ( @@ -2735,7 +2735,7 @@ there is no cwd). The '.' and '..' entries are not returned, but hidden files are shown." }; { defaults with - name = "hivex_value_utf8"; + name = "hivex_value_utf8"; added = (1, 19, 35); style = RString "databuf", [Int64 "valueh"], []; optional = Some "hivex"; shortdesc = "return the data field from the (key, datatype, data) tuple"; @@ -2751,7 +2751,7 @@ strongly-typed and fields can contain arbitrary or unexpected data." }; { defaults with - name = "disk_format"; + name = "disk_format"; added = (1, 19, 38); style = RString "format", [String "filename"], []; tests = [ InitEmpty, Always, TestResultString ( @@ -2781,7 +2781,7 @@ circumstances. See L<guestfs(3)/CVE-2010-3851>. See also: L<guestfs(3)/DISK IMAGE FORMATS>" }; { defaults with - name = "disk_virtual_size"; + name = "disk_virtual_size"; added = (1, 19, 39); style = RInt64 "size", [String "filename"], []; tests = [ InitEmpty, Always, TestResult ( @@ -2808,7 +2808,7 @@ Note that detecting disk features can be insecure under some circumstances. See L<guestfs(3)/CVE-2010-3851>." }; { defaults with - name = "disk_has_backing_file"; + name = "disk_has_backing_file"; added = (1, 19, 39); style = RBool "backingfile", [String "filename"], []; tests = [ InitEmpty, Always, TestResultFalse ( @@ -2835,7 +2835,7 @@ Note that detecting disk features can be insecure under some circumstances. See L<guestfs(3)/CVE-2010-3851>." }; { defaults with - name = "remove_drive"; + name = "remove_drive"; added = (1, 19, 49); style = RErr, [String "label"], []; blocking = false; shortdesc = "remove a disk image"; @@ -2854,7 +2854,7 @@ be in use (eg. mounted) when you do this. We try to detect if the disk is in use and stop you from doing this." }; { defaults with - name = "set_libvirt_supported_credentials"; + name = "set_libvirt_supported_credentials"; added = (1, 19, 52); style = RErr, [StringList "creds"], []; blocking = false; shortdesc = "set libvirt credentials supported by calling program"; @@ -2893,7 +2893,7 @@ See libvirt documentation for the meaning of these credential types. See L<guestfs(3)/LIBVIRT AUTHENTICATION> for documentation and example code." }; { defaults with - name = "get_libvirt_requested_credentials"; + name = "get_libvirt_requested_credentials"; added = (1, 19, 52); style = RStringList "creds", [], []; blocking = false; shortdesc = "get list of credentials requested by libvirt"; @@ -2908,7 +2908,7 @@ C<guestfs_set_libvirt_supported_credentials>. See L<guestfs(3)/LIBVIRT AUTHENTICATION> for documentation and example code." }; { defaults with - name = "get_libvirt_requested_credential_prompt"; + name = "get_libvirt_requested_credential_prompt"; added = (1, 19, 52); style = RString "prompt", [Int "index"], []; blocking = false; shortdesc = "prompt of i'th requested credential"; @@ -2920,7 +2920,7 @@ this returns the empty string C<\"\">. See L<guestfs(3)/LIBVIRT AUTHENTICATION> for documentation and example code." }; { defaults with - name = "get_libvirt_requested_credential_challenge"; + name = "get_libvirt_requested_credential_challenge"; added = (1, 19, 52); style = RString "challenge", [Int "index"], []; blocking = false; shortdesc = "challenge of i'th requested credential"; @@ -2932,7 +2932,7 @@ this returns the empty string C<\"\">. See L<guestfs(3)/LIBVIRT AUTHENTICATION> for documentation and example code." }; { defaults with - name = "get_libvirt_requested_credential_defresult"; + name = "get_libvirt_requested_credential_defresult"; added = (1, 19, 52); style = RString "defresult", [Int "index"], []; blocking = false; shortdesc = "default result of i'th requested credential"; @@ -2944,7 +2944,7 @@ this returns the empty string C<\"\">. See L<guestfs(3)/LIBVIRT AUTHENTICATION> for documentation and example code." }; { defaults with - name = "set_libvirt_requested_credential"; + name = "set_libvirt_requested_credential"; added = (1, 19, 52); style = RErr, [Int "index"; BufferIn "cred"], []; blocking = false; shortdesc = "pass requested credential back to libvirt"; @@ -2955,7 +2955,7 @@ call this function to pass the answer back to libvirt. See L<guestfs(3)/LIBVIRT AUTHENTICATION> for documentation and example code." }; { defaults with - name = "parse_environment"; + name = "parse_environment"; added = (1, 19, 53); style = RErr, [], []; blocking = false; shortdesc = "parse the environment and set handle flags accordingly"; @@ -2973,7 +2973,7 @@ L<guestfs(3)/guestfs_create_flags>, and C<guestfs_parse_environment_list>." }; { defaults with - name = "parse_environment_list"; + name = "parse_environment_list"; added = (1, 19, 53); style = RErr, [StringList "environment"], []; blocking = false; shortdesc = "parse the environment and set handle flags accordingly"; @@ -2988,7 +2988,7 @@ it parses an explicit list of strings instead of the program's environment." }; { defaults with - name = "set_tmpdir"; + name = "set_tmpdir"; added = (1, 19, 58); style = RErr, [OptString "tmpdir"], []; fish_alias = ["tmpdir"]; config_only = true; blocking = false; @@ -3002,7 +3002,7 @@ that is the default. Else if C<TMPDIR> is set, then that is the default. Else C</tmp> is the default." }; { defaults with - name = "get_tmpdir"; + name = "get_tmpdir"; added = (1, 19, 58); style = RString "tmpdir", [], []; blocking = false; shortdesc = "get the temporary directory"; @@ -3010,7 +3010,7 @@ the default. Else C</tmp> is the default." }; Get the directory used by the handle to store temporary files." }; { defaults with - name = "set_cachedir"; + name = "set_cachedir"; added = (1, 19, 58); style = RErr, [OptString "cachedir"], []; fish_alias = ["cachedir"]; config_only = true; blocking = false; @@ -3027,7 +3027,7 @@ that is the default. Else if C<TMPDIR> is set, then that is the default. Else C</var/tmp> is the default." }; { defaults with - name = "get_cachedir"; + name = "get_cachedir"; added = (1, 19, 58); style = RString "cachedir", [], []; blocking = false; shortdesc = "get the appliance cache directory"; @@ -3035,7 +3035,7 @@ the default. Else C</var/tmp> is the default." }; Get the directory used by the handle to store the appliance cache." }; { defaults with - name = "user_cancel"; + name = "user_cancel"; added = (1, 11, 18); style = RErr, [], []; blocking = false; wrapper = false; shortdesc = "cancel the current upload or download operation"; @@ -3068,7 +3068,7 @@ bar with a cancel button, wire up the cancel button to call this function." }; { defaults with - name = "set_program"; + name = "set_program"; added = (1, 21, 29); style = RErr, [String "program"], []; fish_alias = ["program"]; blocking = false; @@ -3082,7 +3082,7 @@ set to the basename from C<argv[0]>. If that was not possible, it is set to the empty string (but never C<NULL>)." }; { defaults with - name = "get_program"; + name = "get_program"; added = (1, 21, 29); style = RConstString "program", [], []; blocking = false; tests = [ @@ -3094,7 +3094,7 @@ it is set to the empty string (but never C<NULL>)." }; Get the program name. See C<guestfs_set_program>." }; { defaults with - name = "add_drive_scratch"; + name = "add_drive_scratch"; added = (1, 23, 10); style = RErr, [Int64 "size"], [OString "name"; OString "label"]; blocking = false; fish_alias = ["scratch"]; @@ -3109,7 +3109,7 @@ The optional arguments C<name> and C<label> are passed through to C<guestfs_add_drive>." }; { defaults with - name = "journal_get"; + name = "journal_get"; added = (1, 23, 11); style = RStructList ("fields", "xattr"), [], []; optional = Some "journal"; test_excuse = "tests in tests/journal subdirectory"; @@ -3132,7 +3132,7 @@ can read a journal entry of any size, ie. it is not limited by the libguestfs protocol." }; { defaults with - name = "disk_create"; + name = "disk_create"; added = (1, 25, 31); style = RErr, [String "filename"; String "format"; Int64 "size"], [OString "backingfile"; OString "backingformat"; OString "preallocation"; OString "compat"; OInt "clustersize"]; test_excuse = "tests in tests/create subdirectory"; shortdesc = "create a blank disk image"; @@ -3184,7 +3184,7 @@ Note that this call does not add the new disk to the handle. You may need to call C<guestfs_add_drive_opts> separately." }; { defaults with - name = "get_backend_settings"; + name = "get_backend_settings"; added = (1, 25, 24); style = RStringList "settings", [], []; blocking = false; tests = [ @@ -3201,7 +3201,7 @@ find a single backend setting, see C<guestfs_get_backend_setting>. See L<guestfs(3)/BACKEND>, L<guestfs(3)/BACKEND SETTINGS>." }; { defaults with - name = "set_backend_settings"; + name = "set_backend_settings"; added = (1, 25, 24); style = RErr, [StringList "settings"], []; config_only = true; blocking = false; @@ -3225,7 +3225,7 @@ C<guestfs_clear_backend_setting>. See L<guestfs(3)/BACKEND>, L<guestfs(3)/BACKEND SETTINGS>." }; { defaults with - name = "get_backend_setting"; + name = "get_backend_setting"; added = (1, 27, 2); style = RString "val", [String "name"], []; blocking = false; shortdesc = "get a single per-backend settings string"; @@ -3242,7 +3242,7 @@ case. See L<guestfs(3)/BACKEND>, L<guestfs(3)/BACKEND SETTINGS>." }; { defaults with - name = "set_backend_setting"; + name = "set_backend_setting"; added = (1, 27, 2); style = RErr, [String "name"; String "val"], []; config_only = true; blocking = false; @@ -3255,7 +3255,7 @@ or beginning with C<\"name=\">, then that setting is replaced. See L<guestfs(3)/BACKEND>, L<guestfs(3)/BACKEND SETTINGS>." }; { defaults with - name = "clear_backend_setting"; + name = "clear_backend_setting"; added = (1, 27, 2); style = RInt "count", [String "name"], []; config_only = true; blocking = false; @@ -3271,7 +3271,7 @@ This call returns the number of strings which were removed See L<guestfs(3)/BACKEND>, L<guestfs(3)/BACKEND SETTINGS>." }; { defaults with - name = "stat"; + name = "stat"; added = (1, 9, 2); style = RStruct ("statbuf", "stat"), [Pathname "path"], []; deprecated_by = Some "statns"; tests = [ @@ -3285,7 +3285,7 @@ Returns file information for the given C<path>. This is the same as the L<stat(2)> system call." }; { defaults with - name = "lstat"; + name = "lstat"; added = (1, 9, 2); style = RStruct ("statbuf", "stat"), [Pathname "path"], []; deprecated_by = Some "lstatns"; tests = [ @@ -3303,7 +3303,7 @@ refers to. This is the same as the L<lstat(2)> system call." }; { defaults with - name = "c_pointer"; + name = "c_pointer"; added = (1, 29, 17); style = RInt64 "ptr", [], []; fish_output = Some FishOutputHexadecimal; tests = [ @@ -3317,7 +3317,7 @@ C pointer to the handle (ie. C<guestfs_h *>). The purpose of this is to allow other libraries to interwork with libguestfs." }; { defaults with - name = "copy_in"; + name = "copy_in"; added = (1, 29, 24); style = RErr, [String "localpath"; Pathname "remotedir"], []; visibility = VPublicNoFish; shortdesc = "copy local files or directories into an image"; @@ -3329,7 +3329,7 @@ the disk image, placing them in the directory called C<remotedir> Wildcards cannot be used." }; { defaults with - name = "copy_out"; + name = "copy_out"; added = (1, 29, 24); style = RErr, [Pathname "remotepath"; String "localdir"], []; visibility = VPublicNoFish; shortdesc = "copy remote files or directories out of an image"; @@ -3352,7 +3352,7 @@ Wildcards cannot be used." }; let daemon_functions = [ { defaults with - name = "mount"; + name = "mount"; added = (0, 0, 3); style = RErr, [Mountable "mountable"; String "mountpoint"], []; proc_nr = Some 1; tests = [ @@ -3388,7 +3388,7 @@ C<guestfs_mount_options> instead (using an empty string for the first parameter if you don't want any options)." }; { defaults with - name = "sync"; + name = "sync"; added = (0, 0, 3); style = RErr, [], []; proc_nr = Some 2; tests = [ @@ -3403,7 +3403,7 @@ You should always call this if you have modified a disk image, before closing the handle." }; { defaults with - name = "touch"; + name = "touch"; added = (0, 0, 3); style = RErr, [Pathname "path"], []; proc_nr = Some 3; tests = [ @@ -3421,7 +3421,7 @@ This command only works on regular files, and will fail on other file types such as directories, symbolic links, block special etc." }; { defaults with - name = "ll"; + name = "ll"; added = (0, 0, 4); style = RString "listing", [Pathname "directory"], []; proc_nr = Some 5; test_excuse = "tricky to test because it depends on the exact format of the 'ls -l' command, which changed between Fedora 10 and Fedora 11"; @@ -3434,7 +3434,7 @@ This command is mostly useful for interactive sessions. It is I<not> intended that you try to parse the output string." }; { defaults with - name = "list_devices"; + name = "list_devices"; added = (0, 0, 4); style = RStringList "devices", [], []; proc_nr = Some 7; tests = [ @@ -3451,7 +3451,7 @@ The full block device names are returned, eg. C</dev/sda>. See also C<guestfs_list_filesystems>." }; { defaults with - name = "list_partitions"; + name = "list_partitions"; added = (0, 0, 4); style = RStringList "partitions", [], []; proc_nr = Some 8; tests = [ @@ -3478,7 +3478,7 @@ call C<guestfs_lvs>. See also C<guestfs_list_filesystems>." }; { defaults with - name = "pvs"; + name = "pvs"; added = (0, 0, 4); style = RStringList "physvols", [], []; proc_nr = Some 9; optional = Some "lvm2"; @@ -3507,7 +3507,7 @@ PVs (eg. C</dev/sda2>). See also C<guestfs_pvs_full>." }; { defaults with - name = "vgs"; + name = "vgs"; added = (0, 0, 4); style = RStringList "volgroups", [], []; proc_nr = Some 10; optional = Some "lvm2"; @@ -3538,7 +3538,7 @@ detected (eg. C<VolGroup00>). See also C<guestfs_vgs_full>." }; { defaults with - name = "lvs"; + name = "lvs"; added = (0, 0, 4); style = RStringList "logvols", [], []; proc_nr = Some 11; optional = Some "lvm2"; @@ -3573,7 +3573,7 @@ This returns a list of the logical volume device names See also C<guestfs_lvs_full>, C<guestfs_list_filesystems>." }; { defaults with - name = "pvs_full"; + name = "pvs_full"; added = (0, 0, 4); style = RStructList ("physvols", "lvm_pv"), [], []; proc_nr = Some 12; optional = Some "lvm2"; @@ -3583,7 +3583,7 @@ List all the physical volumes detected. This is the equivalent of the L<pvs(8)> command. The \"full\" version includes all fields." }; { defaults with - name = "vgs_full"; + name = "vgs_full"; added = (0, 0, 4); style = RStructList ("volgroups", "lvm_vg"), [], []; proc_nr = Some 13; optional = Some "lvm2"; @@ -3593,7 +3593,7 @@ List all the volumes groups detected. This is the equivalent of the L<vgs(8)> command. The \"full\" version includes all fields." }; { defaults with - name = "lvs_full"; + name = "lvs_full"; added = (0, 0, 4); style = RStructList ("logvols", "lvm_lv"), [], []; proc_nr = Some 14; optional = Some "lvm2"; @@ -3603,7 +3603,7 @@ List all the logical volumes detected. This is the equivalent of the L<lvs(8)> command. The \"full\" version includes all fields." }; { defaults with - name = "aug_init"; + name = "aug_init"; added = (0, 0, 7); style = RErr, [Pathname "root"; Int "flags"], []; proc_nr = Some 16; tests = [ @@ -3668,7 +3668,7 @@ To close the handle, you can call C<guestfs_aug_close>. To find out more about Augeas, see L<http://augeas.net/>." }; { defaults with - name = "aug_close"; + name = "aug_close"; added = (0, 0, 7); style = RErr, [], []; proc_nr = Some 26; shortdesc = "close the current Augeas handle"; @@ -3679,7 +3679,7 @@ C<guestfs_aug_init> again before you can use any other Augeas functions." }; { defaults with - name = "aug_defvar"; + name = "aug_defvar"; added = (0, 0, 7); style = RInt "nrnodes", [String "name"; OptString "expr"], []; proc_nr = Some 17; shortdesc = "define an Augeas variable"; @@ -3692,7 +3692,7 @@ On success this returns the number of nodes in C<expr>, or C<0> if C<expr> evaluates to something which is not a nodeset." }; { defaults with - name = "aug_defnode"; + name = "aug_defnode"; added = (0, 0, 7); style = RStruct ("nrnodescreated", "int_bool"), [String "name"; String "expr"; String "val"], []; proc_nr = Some 18; shortdesc = "define an Augeas node"; @@ -3709,7 +3709,7 @@ number of nodes in the nodeset, and a boolean flag if a node was created." }; { defaults with - name = "aug_get"; + name = "aug_get"; added = (0, 0, 7); style = RString "val", [String "augpath"], []; proc_nr = Some 19; shortdesc = "look up the value of an Augeas path"; @@ -3718,7 +3718,7 @@ Look up the value associated with C<path>. If C<path> matches exactly one node, the C<value> is returned." }; { defaults with - name = "aug_set"; + name = "aug_set"; added = (0, 0, 7); style = RErr, [String "augpath"; String "val"], []; proc_nr = Some 20; tests = [ @@ -3739,7 +3739,7 @@ you cannot do that with this call. Instead you must use the C<guestfs_aug_clear> call." }; { defaults with - name = "aug_insert"; + name = "aug_insert"; added = (0, 0, 7); style = RErr, [String "augpath"; String "label"; Bool "before"], []; proc_nr = Some 21; tests = [ @@ -3766,7 +3766,7 @@ C<label> must be a label, ie. not contain C</>, C<*> or end with a bracketed index C<[N]>." }; { defaults with - name = "aug_rm"; + name = "aug_rm"; added = (0, 0, 7); style = RInt "nrnodes", [String "augpath"], []; proc_nr = Some 22; shortdesc = "remove an Augeas path"; @@ -3776,7 +3776,7 @@ Remove C<path> and all of its children. On success this returns the number of entries which were removed." }; { defaults with - name = "aug_mv"; + name = "aug_mv"; added = (0, 0, 7); style = RErr, [String "src"; String "dest"], []; proc_nr = Some 23; shortdesc = "move Augeas node"; @@ -3785,7 +3785,7 @@ Move the node C<src> to C<dest>. C<src> must match exactly one node. C<dest> is overwritten if it exists." }; { defaults with - name = "aug_match"; + name = "aug_match"; added = (0, 0, 7); style = RStringList "matches", [String "augpath"], []; proc_nr = Some 24; shortdesc = "return Augeas nodes which match augpath"; @@ -3795,7 +3795,7 @@ The returned paths are sufficiently qualified so that they match exactly one node in the current tree." }; { defaults with - name = "aug_save"; + name = "aug_save"; added = (0, 0, 7); style = RErr, [], []; proc_nr = Some 25; shortdesc = "write all pending Augeas changes to disk"; @@ -3806,7 +3806,7 @@ The flags which were passed to C<guestfs_aug_init> affect exactly how files are saved." }; { defaults with - name = "aug_load"; + name = "aug_load"; added = (0, 0, 7); style = RErr, [], []; proc_nr = Some 27; shortdesc = "load files into the tree"; @@ -3817,7 +3817,7 @@ See C<aug_load> in the Augeas documentation for the full gory details." }; { defaults with - name = "aug_ls"; + name = "aug_ls"; added = (0, 0, 8); style = RStringList "matches", [String "augpath"], []; proc_nr = Some 28; tests = [ @@ -3834,7 +3834,7 @@ This is just a shortcut for listing C<guestfs_aug_match> C<path/*> and sorting the resulting nodes into alphabetical order." }; { defaults with - name = "rm"; + name = "rm"; added = (0, 0, 8); style = RErr, [Pathname "path"], []; proc_nr = Some 29; tests = [ @@ -3853,7 +3853,7 @@ C<path/*> and sorting the resulting nodes into alphabetical order." }; Remove the single file C<path>." }; { defaults with - name = "rmdir"; + name = "rmdir"; added = (0, 0, 8); style = RErr, [Pathname "path"], []; proc_nr = Some 30; tests = [ @@ -3872,7 +3872,7 @@ Remove the single file C<path>." }; Remove the single directory C<path>." }; { defaults with - name = "rm_rf"; + name = "rm_rf"; added = (0, 0, 8); style = RErr, [Pathname "path"], []; proc_nr = Some 31; tests = [ @@ -3890,7 +3890,7 @@ contents if its a directory. This is like the C<rm -rf> shell command." }; { defaults with - name = "mkdir"; + name = "mkdir"; added = (0, 0, 8); style = RErr, [Pathname "path"], []; proc_nr = Some 32; tests = [ @@ -3905,7 +3905,7 @@ command." }; Create a directory named C<path>." }; { defaults with - name = "mkdir_p"; + name = "mkdir_p"; added = (0, 0, 8); style = RErr, [Pathname "path"], []; proc_nr = Some 33; tests = [ @@ -3932,7 +3932,7 @@ Create a directory named C<path>, creating any parent directories as necessary. This is like the C<mkdir -p> shell command." }; { defaults with - name = "chmod"; + name = "chmod"; added = (0, 0, 8); style = RErr, [Int "mode"; Pathname "path"], []; proc_nr = Some 34; shortdesc = "change file mode"; @@ -3947,7 +3947,7 @@ C<0> to get octal, ie. use C<0700> not C<700>. The mode actually set is affected by the umask." }; { defaults with - name = "chown"; + name = "chown"; added = (0, 0, 8); style = RErr, [Int "owner"; Int "group"; Pathname "path"], []; proc_nr = Some 35; shortdesc = "change file owner and group"; @@ -3959,7 +3959,7 @@ names, you will need to locate and parse the password file yourself (Augeas support makes this relatively easy)." }; { defaults with - name = "exists"; + name = "exists"; added = (0, 0, 8); style = RBool "existsflag", [Pathname "path"], []; proc_nr = Some 36; tests = [ @@ -3976,7 +3976,7 @@ This returns C<true> if and only if there is a file, directory See also C<guestfs_is_file>, C<guestfs_is_dir>, C<guestfs_stat>." }; { defaults with - name = "is_file"; + name = "is_file"; added = (0, 0, 8); style = RBool "fileflag", [Pathname "path"], [OBool "followsymlinks"]; proc_nr = Some 37; once_had_no_optargs = true; @@ -4001,7 +4001,7 @@ function to return true. See also C<guestfs_stat>." }; { defaults with - name = "is_dir"; + name = "is_dir"; added = (0, 0, 8); style = RBool "dirflag", [Pathname "path"], [OBool "followsymlinks"]; proc_nr = Some 38; once_had_no_optargs = true; @@ -4024,7 +4024,7 @@ function to return true. See also C<guestfs_stat>." }; { defaults with - name = "pvcreate"; + name = "pvcreate"; added = (0, 0, 8); style = RErr, [Device "device"], []; proc_nr = Some 39; optional = Some "lvm2"; @@ -4047,7 +4047,7 @@ where C<device> should usually be a partition name such as C</dev/sda1>." }; { defaults with - name = "vgcreate"; + name = "vgcreate"; added = (0, 0, 8); style = RErr, [String "volgroup"; DeviceList "physvols"], []; proc_nr = Some 40; optional = Some "lvm2"; @@ -4080,7 +4080,7 @@ This creates an LVM volume group called C<volgroup> from the non-empty list of physical volumes C<physvols>." }; { defaults with - name = "lvcreate"; + name = "lvcreate"; added = (0, 0, 8); style = RErr, [String "logvol"; String "volgroup"; Int "mbytes"], []; proc_nr = Some 41; optional = Some "lvm2"; @@ -4109,7 +4109,7 @@ This creates an LVM logical volume called C<logvol> on the volume group C<volgroup>, with C<size> megabytes." }; { defaults with - name = "sfdisk"; + name = "sfdisk"; added = (0, 0, 8); style = RErr, [Device "device"; Int "cyls"; Int "heads"; Int "sectors"; StringList "lines"], []; @@ -4141,7 +4141,7 @@ See also: C<guestfs_sfdisk_l>, C<guestfs_sfdisk_N>, C<guestfs_part_init>" }; { defaults with - name = "write_file"; + name = "write_file"; added = (0, 0, 8); style = RErr, [Pathname "path"; String "content"; Int "size"], []; proc_nr = Some 44; protocol_limit_warning = true; deprecated_by = Some "write"; @@ -4164,7 +4164,7 @@ I<NB.> Owing to a bug, writing content containing ASCII NUL characters does I<not> work, even if the length is specified." }; { defaults with - name = "umount"; + name = "umount"; added = (0, 0, 8); style = RErr, [Dev_or_Path "pathordevice"], [OBool "force"; OBool "lazyunmount"]; proc_nr = Some 45; fish_alias = ["unmount"]; @@ -4189,7 +4189,7 @@ specified either by its mountpoint (path) or the device which contains the filesystem." }; { defaults with - name = "mounts"; + name = "mounts"; added = (0, 0, 8); style = RStringList "devices", [], []; proc_nr = Some 46; tests = [ @@ -4206,7 +4206,7 @@ Some internal mounts are not shown. See also: C<guestfs_mountpoints>" }; { defaults with - name = "umount_all"; + name = "umount_all"; added = (0, 0, 8); style = RErr, [], []; proc_nr = Some 47; fish_alias = ["unmount-all"]; @@ -4239,7 +4239,7 @@ This unmounts all mounted filesystems. Some internal mounts are not unmounted by this call." }; { defaults with - name = "lvm_remove_all"; + name = "lvm_remove_all"; added = (0, 0, 8); style = RErr, [], []; proc_nr = Some 48; optional = Some "lvm2"; @@ -4249,7 +4249,7 @@ This command removes all LVM logical volumes, volume groups and physical volumes." }; { defaults with - name = "file"; + name = "file"; added = (1, 9, 1); style = RString "description", [Dev_or_Path "path"], []; proc_nr = Some 49; tests = [ @@ -4284,7 +4284,7 @@ See also: L<file(1)>, C<guestfs_vfs_type>, C<guestfs_lstat>, C<guestfs_is_file>, C<guestfs_is_blockdev> (etc), C<guestfs_is_zero>." }; { defaults with - name = "command"; + name = "command"; added = (1, 9, 1); style = RString "output", [StringList "arguments"], []; proc_nr = Some 50; protocol_limit_warning = true; @@ -4388,7 +4388,7 @@ all filesystems that are needed are mounted at the right locations." }; { defaults with - name = "command_lines"; + name = "command_lines"; added = (1, 9, 1); style = RStringList "lines", [StringList "arguments"], []; proc_nr = Some 51; protocol_limit_warning = true; @@ -4468,7 +4468,7 @@ result into a list of lines. See also: C<guestfs_sh_lines>" }; { defaults with - name = "statvfs"; + name = "statvfs"; added = (1, 9, 2); style = RStruct ("statbuf", "statvfs"), [Pathname "path"], []; proc_nr = Some 54; tests = [ @@ -4484,7 +4484,7 @@ C<path> should be a file or directory in the mounted file system This is the same as the L<statvfs(2)> system call." }; { defaults with - name = "tune2fs_l"; + name = "tune2fs_l"; added = (1, 9, 2); style = RHashtable "superblock", [Device "device"], []; proc_nr = Some 55; tests = [ @@ -4504,7 +4504,7 @@ clearly defined, and depends on both the version of C<tune2fs> that libguestfs was built against, and the filesystem itself." }; { defaults with - name = "blockdev_setro"; + name = "blockdev_setro"; added = (1, 9, 3); style = RErr, [Device "device"], []; proc_nr = Some 56; tests = [ @@ -4519,7 +4519,7 @@ Sets the block device named C<device> to read-only. This uses the L<blockdev(8)> command." }; { defaults with - name = "blockdev_setrw"; + name = "blockdev_setrw"; added = (1, 9, 3); style = RErr, [Device "device"], []; proc_nr = Some 57; tests = [ @@ -4534,7 +4534,7 @@ Sets the block device named C<device> to read-write. This uses the L<blockdev(8)> command." }; { defaults with - name = "blockdev_getro"; + name = "blockdev_getro"; added = (1, 9, 3); style = RBool "ro", [Device "device"], []; proc_nr = Some 58; tests = [ @@ -4550,7 +4550,7 @@ Returns a boolean indicating if the block device is read-only This uses the L<blockdev(8)> command." }; { defaults with - name = "blockdev_getss"; + name = "blockdev_getss"; added = (1, 9, 3); style = RInt "sectorsize", [Device "device"], []; proc_nr = Some 59; tests = [ @@ -4568,7 +4568,7 @@ for that). This uses the L<blockdev(8)> command." }; { defaults with - name = "blockdev_getbsz"; + name = "blockdev_getbsz"; added = (1, 9, 3); style = RInt "blocksize", [Device "device"], []; proc_nr = Some 60; test_excuse = "cannot be tested because output differs depending on page size"; @@ -4585,7 +4585,7 @@ block size to choose. This uses the L<blockdev(8)> command." }; { defaults with - name = "blockdev_setbsz"; + name = "blockdev_setbsz"; added = (1, 9, 3); style = RErr, [Device "device"; Int "blocksize"], []; proc_nr = Some 61; deprecated_by = Some "mkfs"; @@ -4598,7 +4598,7 @@ If you need to set the filesystem block size, use the C<blocksize> option of C<guestfs_mkfs>." }; { defaults with - name = "blockdev_getsz"; + name = "blockdev_getsz"; added = (1, 9, 3); style = RInt64 "sizeinsectors", [Device "device"], []; proc_nr = Some 62; tests = [ @@ -4617,7 +4617,7 @@ useful I<size in bytes>. This uses the L<blockdev(8)> command." }; { defaults with - name = "blockdev_getsize64"; + name = "blockdev_getsize64"; added = (1, 9, 3); style = RInt64 "sizeinbytes", [Device "device"], []; proc_nr = Some 63; tests = [ @@ -4633,7 +4633,7 @@ See also C<guestfs_blockdev_getsz>. This uses the L<blockdev(8)> command." }; { defaults with - name = "blockdev_flushbufs"; + name = "blockdev_flushbufs"; added = (1, 9, 3); style = RErr, [Device "device"], []; proc_nr = Some 64; tests = [ @@ -4648,7 +4648,7 @@ with C<device>. This uses the L<blockdev(8)> command." }; { defaults with - name = "blockdev_rereadpt"; + name = "blockdev_rereadpt"; added = (1, 9, 3); style = RErr, [Device "device"], []; proc_nr = Some 65; tests = [ @@ -4662,7 +4662,7 @@ Reread the partition table on C<device>. This uses the L<blockdev(8)> command." }; { defaults with - name = "upload"; + name = "upload"; added = (1, 0, 2); style = RErr, [FileIn "filename"; Dev_or_Path "remotefilename"], []; proc_nr = Some 66; progress = true; cancellable = true; @@ -4684,7 +4684,7 @@ C<filename> can also be a named pipe. See also C<guestfs_download>." }; { defaults with - name = "download"; + name = "download"; added = (1, 0, 2); style = RErr, [Dev_or_Path "remotefilename"; FileOut "filename"], []; proc_nr = Some 67; progress = true; cancellable = true; @@ -4708,7 +4708,7 @@ C<filename> can also be a named pipe. See also C<guestfs_upload>, C<guestfs_cat>." }; { defaults with - name = "checksum"; + name = "checksum"; added = (1, 0, 2); style = RString "checksum", [String "csumtype"; Pathname "path"], []; proc_nr = Some 68; tests = [ @@ -4780,7 +4780,7 @@ To get the checksum for a device, use C<guestfs_checksum_device>. To get the checksums for many files, use C<guestfs_checksums_out>." }; { defaults with - name = "tar_in"; + name = "tar_in"; added = (1, 0, 3); style = RErr, [FileIn "tarfile"; Pathname "directory"], [OString "compress"]; proc_nr = Some 69; once_had_no_optargs = true; @@ -4811,7 +4811,7 @@ type of the input file: C<compress>, C<gzip>, C<bzip2>, C<xz>, C<lzop>. compression types)." }; { defaults with - name = "tar_out"; + name = "tar_out"; added = (1, 0, 3); style = RErr, [String "directory"; FileOut "tarfile"], [OString "compress"; OBool "numericowner"; OStringList "excludes"]; proc_nr = Some 70; once_had_no_optargs = true; @@ -4845,7 +4845,7 @@ instead of user/group names. =back" }; { defaults with - name = "tgz_in"; + name = "tgz_in"; added = (1, 0, 3); style = RErr, [FileIn "tarball"; Pathname "directory"], []; proc_nr = Some 71; deprecated_by = Some "tar_in"; @@ -4862,7 +4862,7 @@ This command uploads and unpacks local file C<tarball> (a I<gzip compressed> tar file) into C<directory>." }; { defaults with - name = "tgz_out"; + name = "tgz_out"; added = (1, 0, 3); style = RErr, [Pathname "directory"; FileOut "tarball"], []; proc_nr = Some 72; deprecated_by = Some "tar_out"; @@ -4873,7 +4873,7 @@ This command packs the contents of C<directory> and downloads it to local file C<tarball>." }; { defaults with - name = "mount_ro"; + name = "mount_ro"; added = (1, 0, 10); style = RErr, [Mountable "mountable"; String "mountpoint"], []; proc_nr = Some 73; tests = [ @@ -4893,7 +4893,7 @@ This is the same as the C<guestfs_mount> command, but it mounts the filesystem with the read-only (I<-o ro>) flag." }; { defaults with - name = "mount_options"; + name = "mount_options"; added = (1, 0, 10); style = RErr, [String "options"; Mountable "mountable"; String "mountpoint"], []; proc_nr = Some 74; shortdesc = "mount a guest disk with mount options"; @@ -4907,7 +4907,7 @@ no options are passed (all options default to whatever the filesystem uses)." }; { defaults with - name = "mount_vfs"; + name = "mount_vfs"; added = (1, 0, 10); style = RErr, [String "options"; String "vfstype"; Mountable "mountable"; String "mountpoint"], []; proc_nr = Some 75; shortdesc = "mount a guest disk with mount options and vfstype"; @@ -4917,7 +4917,7 @@ allows you to set both the mount options and the vfstype as for the L<mount(8)> I<-o> and I<-t> flags." }; { defaults with - name = "debug"; + name = "debug"; added = (1, 0, 11); style = RString "result", [String "subcmd"; StringList "extraargs"], []; proc_nr = Some 76; visibility = VDebug; @@ -4932,7 +4932,7 @@ to look at the file C<daemon/debug.c> in the libguestfs source to find out what you can do." }; { defaults with - name = "lvremove"; + name = "lvremove"; added = (1, 0, 13); style = RErr, [Device "device"], []; proc_nr = Some 77; optional = Some "lvm2"; @@ -4974,7 +4974,7 @@ You can also remove all LVs in a volume group by specifying the VG name, C</dev/VG>." }; { defaults with - name = "vgremove"; + name = "vgremove"; added = (1, 0, 13); style = RErr, [String "vgname"], []; proc_nr = Some 78; optional = Some "lvm2"; @@ -5006,7 +5006,7 @@ This also forcibly removes all logical volumes in the volume group (if any)." }; { defaults with - name = "pvremove"; + name = "pvremove"; added = (1, 0, 13); style = RErr, [Device "device"], []; proc_nr = Some 79; optional = Some "lvm2"; @@ -5052,7 +5052,7 @@ wipe physical volumes that contain any volume groups, so you have to remove those first." }; { defaults with - name = "set_e2label"; + name = "set_e2label"; added = (1, 0, 15); style = RErr, [Device "device"; String "label"], []; proc_nr = Some 80; deprecated_by = Some "set_label"; @@ -5071,7 +5071,7 @@ You can use either C<guestfs_tune2fs_l> or C<guestfs_get_e2label> to return the existing label on a filesystem." }; { defaults with - name = "get_e2label"; + name = "get_e2label"; added = (1, 0, 15); style = RString "label", [Device "device"], []; proc_nr = Some 81; deprecated_by = Some "vfs_label"; @@ -5081,7 +5081,7 @@ This returns the ext2/3/4 filesystem label of the filesystem on C<device>." }; { defaults with - name = "set_e2uuid"; + name = "set_e2uuid"; added = (1, 0, 15); style = RErr, [Device "device"; String "uuid"], []; proc_nr = Some 82; deprecated_by = Some "set_uuid"; @@ -5111,7 +5111,7 @@ You can use C<guestfs_vfs_uuid> to return the existing UUID of a filesystem." }; { defaults with - name = "get_e2uuid"; + name = "get_e2uuid"; added = (1, 0, 15); style = RString "uuid", [Device "device"], []; proc_nr = Some 83; deprecated_by = Some "vfs_uuid"; @@ -5129,7 +5129,7 @@ This returns the ext2/3/4 filesystem UUID of the filesystem on C<device>." }; { defaults with - name = "fsck"; + name = "fsck"; added = (1, 0, 16); style = RInt "status", [String "fstype"; Device "device"], []; proc_nr = Some 84; fish_output = Some FishOutputHexadecimal; @@ -5173,7 +5173,7 @@ Checking or repairing NTFS volumes is not supported This command is entirely equivalent to running C<fsck -a -t fstype device>." }; { defaults with - name = "zero"; + name = "zero"; added = (1, 0, 16); style = RErr, [Device "device"], []; proc_nr = Some 85; progress = true; @@ -5198,7 +5198,7 @@ See also: C<guestfs_zero_device>, C<guestfs_scrub_device>, C<guestfs_is_zero_device>" }; { defaults with - name = "grub_install"; + name = "grub_install"; added = (1, 0, 17); style = RErr, [Pathname "root"; Device "device"], []; proc_nr = Some 86; optional = Some "grub"; @@ -5252,7 +5252,7 @@ replacing C</dev/vda> with the name of the installation device. =back" }; { defaults with - name = "cp"; + name = "cp"; added = (1, 0, 18); style = RErr, [Pathname "src"; Pathname "dest"], []; proc_nr = Some 87; tests = [ @@ -5279,7 +5279,7 @@ This copies a file from C<src> to C<dest> where C<dest> is either a destination filename or destination directory." }; { defaults with - name = "cp_a"; + name = "cp_a"; added = (1, 0, 18); style = RErr, [Pathname "src"; Pathname "dest"], []; proc_nr = Some 88; tests = [ @@ -5296,7 +5296,7 @@ This copies a file or directory from C<src> to C<dest> recursively using the C<cp -a> command." }; { defaults with - name = "mv"; + name = "mv"; added = (1, 0, 18); style = RErr, [Pathname "src"; Pathname "dest"], []; proc_nr = Some 89; tests = [ @@ -5319,7 +5319,7 @@ either a destination filename or destination directory. See also: C<guestfs_rename>." }; { defaults with - name = "drop_caches"; + name = "drop_caches"; added = (1, 0, 18); style = RErr, [Int "whattodrop"], []; proc_nr = Some 90; tests = [ @@ -5339,7 +5339,7 @@ This automatically calls L<sync(2)> before the operation, so that the maximum guest memory is freed." }; { defaults with - name = "dmesg"; + name = "dmesg"; added = (1, 0, 18); style = RString "kmsgs", [], []; proc_nr = Some 91; tests = [ @@ -5358,7 +5358,7 @@ the environment variable C<LIBGUESTFS_DEBUG=1> before running the program." }; { defaults with - name = "ping_daemon"; + name = "ping_daemon"; added = (1, 0, 18); style = RErr, [], []; proc_nr = Some 92; tests = [ @@ -5373,7 +5373,7 @@ daemon responds to the ping message, without affecting the daemon or attached block device(s) in any other way." }; { defaults with - name = "equal"; + name = "equal"; added = (1, 0, 18); style = RBool "equality", [Pathname "file1"; Pathname "file2"], []; proc_nr = Some 93; tests = [ @@ -5399,7 +5399,7 @@ true if their content is exactly equal, or false otherwise. The external L<cmp(1)> program is used for the comparison." }; { defaults with - name = "strings"; + name = "strings"; added = (1, 0, 22); style = RStringList "stringsout", [Pathname "path"], []; proc_nr = Some 94; protocol_limit_warning = true; @@ -5424,7 +5424,7 @@ parsing untrusted files. These are mitigated in the current version of libguestfs, but see L<guestfs(3)/CVE-2014-8484>." }; { defaults with - name = "strings_e"; + name = "strings_e"; added = (1, 0, 22); style = RStringList "stringsout", [String "encoding"; Pathname "path"], []; proc_nr = Some 95; protocol_limit_warning = true; @@ -5483,7 +5483,7 @@ parsing untrusted files. These are mitigated in the current version of libguestfs, but see L<guestfs(3)/CVE-2014-8484>." }; { defaults with - name = "hexdump"; + name = "hexdump"; added = (1, 0, 22); style = RString "dump", [Pathname "path"], []; proc_nr = Some 96; protocol_limit_warning = true; @@ -5505,7 +5505,7 @@ This runs C<hexdump -C> on the given C<path>. The result is the human-readable, canonical hex dump of the file." }; { defaults with - name = "zerofree"; + name = "zerofree"; added = (1, 0, 26); style = RErr, [Device "device"], []; proc_nr = Some 97; optional = Some "zerofree"; @@ -5534,7 +5534,7 @@ It is possible that using this program can damage the filesystem or data on the filesystem." }; { defaults with - name = "pvresize"; + name = "pvresize"; added = (1, 0, 26); style = RErr, [Device "device"], []; proc_nr = Some 98; optional = Some "lvm2"; @@ -5544,7 +5544,7 @@ This resizes (expands or shrinks) an existing LVM physical volume to match the new size of the underlying device." }; { defaults with - name = "sfdisk_N"; + name = "sfdisk_N"; added = (1, 0, 26); style = RErr, [Device "device"; Int "partnum"; Int "cyls"; Int "heads"; Int "sectors"; String "line"], []; @@ -5561,7 +5561,7 @@ pass C<0> for the cyls/heads/sectors parameters. See also: C<guestfs_part_add>" }; { defaults with - name = "sfdisk_l"; + name = "sfdisk_l"; added = (1, 0, 26); style = RString "partitions", [Device "device"], []; proc_nr = Some 100; deprecated_by = Some "part_list"; @@ -5574,7 +5574,7 @@ not intended to be parsed. See also: C<guestfs_part_list>" }; { defaults with - name = "sfdisk_kernel_geometry"; + name = "sfdisk_kernel_geometry"; added = (1, 0, 26); style = RString "partitions", [Device "device"], []; proc_nr = Some 101; shortdesc = "display the kernel geometry"; @@ -5585,7 +5585,7 @@ The result is in human-readable format, and not designed to be parsed." }; { defaults with - name = "sfdisk_disk_geometry"; + name = "sfdisk_disk_geometry"; added = (1, 0, 26); style = RString "partitions", [Device "device"], []; proc_nr = Some 102; shortdesc = "display the disk geometry from the partition table"; @@ -5599,7 +5599,7 @@ The result is in human-readable format, and not designed to be parsed." }; { defaults with - name = "vg_activate_all"; + name = "vg_activate_all"; added = (1, 0, 26); style = RErr, [Bool "activate"], []; proc_nr = Some 103; optional = Some "lvm2"; @@ -5611,7 +5611,7 @@ all logical volumes in all volume groups. This command is the same as running C<vgchange -a y|n>" }; { defaults with - name = "vg_activate"; + name = "vg_activate"; added = (1, 0, 26); style = RErr, [Bool "activate"; StringList "volgroups"], []; proc_nr = Some 104; optional = Some "lvm2"; @@ -5626,7 +5626,7 @@ Note that if C<volgroups> is an empty list then B<all> volume groups are activated or deactivated." }; { defaults with - name = "lvresize"; + name = "lvresize"; added = (1, 0, 27); style = RErr, [Device "device"; Int "mbytes"], []; proc_nr = Some 105; optional = Some "lvm2"; @@ -5662,7 +5662,7 @@ volume to C<mbytes>. When reducing, data in the reduced part is lost." }; { defaults with - name = "resize2fs"; + name = "resize2fs"; added = (1, 0, 27); style = RErr, [Device "device"], []; proc_nr = Some 106; shortdesc = "resize an ext2, ext3 or ext4 filesystem"; @@ -5673,7 +5673,7 @@ the underlying device. See also L<guestfs(3)/RESIZE2FS ERRORS>." }; { defaults with - name = "e2fsck_f"; + name = "e2fsck_f"; added = (1, 0, 29); style = RErr, [Device "device"], []; proc_nr = Some 108; deprecated_by = Some "e2fsck"; @@ -5684,7 +5684,7 @@ filesystem checker on C<device>, noninteractively (I<-p>), even if the filesystem appears to be clean (I<-f>)." }; { defaults with - name = "sleep"; + name = "sleep"; added = (1, 0, 41); style = RErr, [Int "secs"], []; proc_nr = Some 109; tests = [ @@ -5696,7 +5696,7 @@ even if the filesystem appears to be clean (I<-f>)." }; Sleep for C<secs> seconds." }; { defaults with - name = "ntfs_3g_probe"; + name = "ntfs_3g_probe"; added = (1, 0, 43); style = RInt "status", [Bool "rw"; Device "device"], []; proc_nr = Some 110; optional = Some "ntfs3g"; @@ -5725,7 +5725,7 @@ would succeed, or some non-zero value documented in the L<ntfs-3g.probe(8)> manual page." }; { defaults with - name = "sh"; + name = "sh"; added = (1, 0, 50); style = RString "output", [String "command"], []; proc_nr = Some 111; shortdesc = "run a command via the shell"; @@ -5744,7 +5744,7 @@ and so on. All the provisos about C<guestfs_command> apply to this call." }; { defaults with - name = "sh_lines"; + name = "sh_lines"; added = (1, 0, 50); style = RStringList "lines", [String "command"], []; proc_nr = Some 112; shortdesc = "run a command via the shell returning lines"; @@ -5755,7 +5755,7 @@ into a list of lines. See also: C<guestfs_command_lines>" }; { defaults with - name = "glob_expand"; + name = "glob_expand"; added = (1, 0, 50); (* Use Pathname here, and hence ABS_PATH (pattern,...) in * generated code in stubs.c, since all valid glob patterns must * start with "/". There is no concept of "cwd" in libguestfs, @@ -5801,7 +5801,7 @@ name (eg. C</dev/sd*>). Use C<guestfs_list_devices>, C<guestfs_list_partitions> etc functions instead." }; { defaults with - name = "scrub_device"; + name = "scrub_device"; added = (1, 0, 52); style = RErr, [Device "device"], []; proc_nr = Some 114; optional = Some "scrub"; @@ -5818,7 +5818,7 @@ It is an interface to the L<scrub(1)> program. See that manual page for more details." }; { defaults with - name = "scrub_file"; + name = "scrub_file"; added = (1, 0, 52); style = RErr, [Pathname "file"], []; proc_nr = Some 115; optional = Some "scrub"; @@ -5849,7 +5849,7 @@ It is an interface to the L<scrub(1)> program. See that manual page for more details." }; { defaults with - name = "scrub_freespace"; + name = "scrub_freespace"; added = (1, 0, 52); style = RErr, [Pathname "dir"], []; proc_nr = Some 116; optional = Some "scrub"; @@ -5866,7 +5866,7 @@ It is an interface to the L<scrub(1)> program. See that manual page for more details." }; { defaults with - name = "mkdtemp"; + name = "mkdtemp"; added = (1, 0, 54); style = RString "dir", [Pathname "tmpl"], []; proc_nr = Some 117; tests = [ @@ -5896,7 +5896,7 @@ directory and its contents after use. See also: L<mkdtemp(3)>" }; { defaults with - name = "wc_l"; + name = "wc_l"; added = (1, 0, 54); style = RInt "lines", [Pathname "path"], []; proc_nr = Some 118; tests = [ @@ -5912,7 +5912,7 @@ This command counts the lines in a file, using the C<wc -l> external command." }; { defaults with - name = "wc_w"; + name = "wc_w"; added = (1, 0, 54); style = RInt "words", [Pathname "path"], []; proc_nr = Some 119; tests = [ @@ -5925,7 +5925,7 @@ This command counts the words in a file, using the C<wc -w> external command." }; { defaults with - name = "wc_c"; + name = "wc_c"; added = (1, 0, 54); style = RInt "chars", [Pathname "path"], []; proc_nr = Some 120; tests = [ @@ -5938,7 +5938,7 @@ This command counts the characters in a file, using the C<wc -c> external command." }; { defaults with - name = "head"; + name = "head"; added = (1, 0, 54); style = RStringList "lines", [Pathname "path"], []; proc_nr = Some 121; protocol_limit_warning = true; @@ -5957,7 +5957,7 @@ This command returns up to the first 10 lines of a file as a list of strings." }; { defaults with - name = "head_n"; + name = "head_n"; added = (1, 0, 54); style = RStringList "lines", [Int "nrlines"; Pathname "path"], []; proc_nr = Some 122; protocol_limit_warning = true; @@ -5983,7 +5983,7 @@ from the file C<path>, excluding the last C<nrlines> lines. If the parameter C<nrlines> is zero, this returns an empty list." }; { defaults with - name = "tail"; + name = "tail"; added = (1, 0, 54); style = RStringList "lines", [Pathname "path"], []; proc_nr = Some 123; protocol_limit_warning = true; @@ -5998,7 +5998,7 @@ This command returns up to the last 10 lines of a file as a list of strings." }; { defaults with - name = "tail_n"; + name = "tail_n"; added = (1, 0, 54); style = RStringList "lines", [Int "nrlines"; Pathname "path"], []; proc_nr = Some 124; protocol_limit_warning = true; @@ -6024,7 +6024,7 @@ from the file C<path>, starting with the C<-nrlines>th line. If the parameter C<nrlines> is zero, this returns an empty list." }; { defaults with - name = "df"; + name = "df"; added = (1, 0, 54); style = RString "output", [], []; proc_nr = Some 125; test_excuse = "tricky to test because it depends on the exact format of the 'df' command and other imponderables"; @@ -6037,7 +6037,7 @@ is I<not> intended that you try to parse the output string. Use C<guestfs_statvfs> from programs." }; { defaults with - name = "df_h"; + name = "df_h"; added = (1, 0, 54); style = RString "output", [], []; proc_nr = Some 126; test_excuse = "tricky to test because it depends on the exact format of the 'df' command and other imponderables"; @@ -6051,7 +6051,7 @@ is I<not> intended that you try to parse the output string. Use C<guestfs_statvfs> from programs." }; { defaults with - name = "du"; + name = "du"; added = (1, 0, 54); style = RInt64 "sizekb", [Pathname "path"], []; proc_nr = Some 127; progress = true; @@ -6072,7 +6072,7 @@ The result is the estimated size in I<kilobytes> (ie. units of 1024 bytes)." }; { defaults with - name = "initrd_list"; + name = "initrd_list"; added = (1, 0, 54); style = RStringList "filenames", [Pathname "path"], []; proc_nr = Some 128; tests = [ @@ -6093,7 +6093,7 @@ filesystem as initrd. We I<only> support the newer initramfs format (compressed cpio files)." }; { defaults with - name = "mount_loop"; + name = "mount_loop"; added = (1, 0, 54); style = RErr, [Pathname "file"; Pathname "mountpoint"], []; proc_nr = Some 129; shortdesc = "mount a file using the loop device"; @@ -6103,7 +6103,7 @@ in a file) on a mount point. It is entirely equivalent to the command C<mount -o loop file mountpoint>." }; { defaults with - name = "mkswap"; + name = "mkswap"; added = (1, 0, 55); style = RErr, [Device "device"], [OString "label"; OString "uuid"]; proc_nr = Some 130; once_had_no_optargs = true; @@ -6129,7 +6129,7 @@ The option arguments C<label> and C<uuid> allow you to set the label and/or UUID of the new swap partition." }; { defaults with - name = "mkswap_L"; + name = "mkswap_L"; added = (1, 0, 55); style = RErr, [String "label"; Device "device"], []; proc_nr = Some 131; deprecated_by = Some "mkswap"; @@ -6147,7 +6147,7 @@ Note that you cannot attach a swap label to a block device a limitation of the kernel or swap tools." }; { defaults with - name = "mkswap_U"; + name = "mkswap_U"; added = (1, 0, 55); style = RErr, [String "uuid"; Device "device"], []; proc_nr = Some 132; deprecated_by = Some "mkswap"; @@ -6163,7 +6163,7 @@ a limitation of the kernel or swap tools." }; Create a swap partition on C<device> with UUID C<uuid>." }; { defaults with - name = "mknod"; + name = "mknod"; added = (1, 0, 55); style = RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"], []; proc_nr = Some 133; optional = Some "mknod"; @@ -6199,7 +6199,7 @@ in the appropriate constant for you. The mode actually set is affected by the umask." }; { defaults with - name = "mkfifo"; + name = "mkfifo"; added = (1, 0, 55); style = RErr, [Int "mode"; Pathname "path"], []; proc_nr = Some 134; optional = Some "mknod"; @@ -6223,7 +6223,7 @@ bits. The mode actually set is affected by the umask." }; { defaults with - name = "mknod_b"; + name = "mknod_b"; added = (1, 0, 55); style = RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"], []; proc_nr = Some 135; optional = Some "mknod"; @@ -6247,7 +6247,7 @@ bits. The mode actually set is affected by the umask." }; { defaults with - name = "mknod_c"; + name = "mknod_c"; added = (1, 0, 55); style = RErr, [Int "mode"; Int "devmajor"; Int "devminor"; Pathname "path"], []; proc_nr = Some 136; optional = Some "mknod"; @@ -6271,7 +6271,7 @@ bits. The mode actually set is affected by the umask." }; { defaults with - name = "umask"; + name = "umask"; added = (1, 0, 55); style = RInt "oldmask", [Int "mask"], []; proc_nr = Some 137; fish_output = Some FishOutputOctal; @@ -6299,7 +6299,7 @@ L<umask(2)>, C<guestfs_mknod>, C<guestfs_mkdir>. This call returns the previous umask." }; { defaults with - name = "readdir"; + name = "readdir"; added = (1, 0, 55); style = RStructList ("entries", "dirent"), [Pathname "dir"], []; proc_nr = Some 138; protocol_limit_warning = true; @@ -6360,7 +6360,7 @@ get a simple list of names, use C<guestfs_ls>. To get a printable directory for human consumption, use C<guestfs_ll>." }; { defaults with - name = "sfdiskM"; + name = "sfdiskM"; added = (1, 0, 55); style = RErr, [Device "device"; StringList "lines"], []; proc_nr = Some 139; deprecated_by = Some "part_add"; @@ -6376,7 +6376,7 @@ See also: C<guestfs_sfdisk>, the L<sfdisk(8)> manpage and C<guestfs_part_disk>" }; { defaults with - name = "zfile"; + name = "zfile"; added = (1, 0, 59); style = RString "description", [String "meth"; Pathname "path"], []; proc_nr = Some 140; deprecated_by = Some "file"; @@ -6391,7 +6391,7 @@ Since 1.0.63, use C<guestfs_file> instead which can now process compressed files." }; { defaults with - name = "getxattrs"; + name = "getxattrs"; added = (1, 0, 59); style = RStructList ("xattrs", "xattr"), [Pathname "path"], []; proc_nr = Some 141; optional = Some "linuxxattrs"; @@ -6406,7 +6406,7 @@ L<listxattr(2)> and L<getxattr(2)> calls. See also: C<guestfs_lgetxattrs>, L<attr(5)>." }; { defaults with - name = "lgetxattrs"; + name = "lgetxattrs"; added = (1, 0, 59); style = RStructList ("xattrs", "xattr"), [Pathname "path"], []; proc_nr = Some 142; optional = Some "linuxxattrs"; @@ -6417,7 +6417,7 @@ is a symbolic link, then it returns the extended attributes of the link itself." }; { defaults with - name = "setxattr"; + name = "setxattr"; added = (1, 0, 59); style = RErr, [String "xattr"; String "val"; Int "vallen"; (* will be BufferIn *) Pathname "path"], []; @@ -6432,7 +6432,7 @@ The value is arbitrary 8 bit data. See also: C<guestfs_lsetxattr>, L<attr(5)>." }; { defaults with - name = "lsetxattr"; + name = "lsetxattr"; added = (1, 0, 59); style = RErr, [String "xattr"; String "val"; Int "vallen"; (* will be BufferIn *) Pathname "path"], []; @@ -6445,7 +6445,7 @@ is a symbolic link, then it sets an extended attribute of the link itself." }; { defaults with - name = "removexattr"; + name = "removexattr"; added = (1, 0, 59); style = RErr, [String "xattr"; Pathname "path"], []; proc_nr = Some 145; optional = Some "linuxxattrs"; @@ -6457,7 +6457,7 @@ of the file C<path>. See also: C<guestfs_lremovexattr>, L<attr(5)>." }; { defaults with - name = "lremovexattr"; + name = "lremovexattr"; added = (1, 0, 59); style = RErr, [String "xattr"; Pathname "path"], []; proc_nr = Some 146; optional = Some "linuxxattrs"; @@ -6468,7 +6468,7 @@ is a symbolic link, then it removes an extended attribute of the link itself." }; { defaults with - name = "mountpoints"; + name = "mountpoints"; added = (1, 0, 62); style = RHashtable "mps", [], []; proc_nr = Some 147; shortdesc = "show mountpoints"; @@ -6478,7 +6478,7 @@ a list of devices. This one returns a hash table (map) of device name to directory where the device is mounted." }; { defaults with - name = "mkmountpoint"; + name = "mkmountpoint"; added = (1, 0, 62); (* This is a special case: while you would expect a parameter * of type "Pathname", that doesn't work, because it implies * NEED_ROOT in the generated calling code in stubs.c, and @@ -6528,7 +6528,7 @@ handles] can cause C<guestfs_umount_all> to be called when the handle is closed which can also trigger these issues." }; { defaults with - name = "rmmountpoint"; + name = "rmmountpoint"; added = (1, 0, 62); style = RErr, [String "exemptpath"], []; proc_nr = Some 149; shortdesc = "remove a mountpoint"; @@ -6538,7 +6538,7 @@ with C<guestfs_mkmountpoint>. See C<guestfs_mkmountpoint> for full details." }; { defaults with - name = "grep"; + name = "grep"; added = (1, 0, 66); style = RStringList "lines", [String "regex"; Pathname "path"], [OBool "extended"; OBool "fixed"; OBool "insensitive"; OBool "compressed"]; proc_nr = Some 151; protocol_limit_warning = true; once_had_no_optargs = true; @@ -6618,7 +6618,7 @@ compress- or gzip-compressed. =back" }; { defaults with - name = "egrep"; + name = "egrep"; added = (1, 0, 66); style = RStringList "lines", [String "regex"; Pathname "path"], []; proc_nr = Some 152; protocol_limit_warning = true; @@ -6634,7 +6634,7 @@ This calls the external C<egrep> program and returns the matching lines." }; { defaults with - name = "fgrep"; + name = "fgrep"; added = (1, 0, 66); style = RStringList "lines", [String "pattern"; Pathname "path"], []; proc_nr = Some 153; protocol_limit_warning = true; @@ -6650,7 +6650,7 @@ This calls the external C<fgrep> program and returns the matching lines." }; { defaults with - name = "grepi"; + name = "grepi"; added = (1, 0, 66); style = RStringList "lines", [String "regex"; Pathname "path"], []; proc_nr = Some 154; protocol_limit_warning = true; @@ -6666,7 +6666,7 @@ This calls the external C<grep -i> program and returns the matching lines." }; { defaults with - name = "egrepi"; + name = "egrepi"; added = (1, 0, 66); style = RStringList "lines", [String "regex"; Pathname "path"], []; proc_nr = Some 155; protocol_limit_warning = true; @@ -6682,7 +6682,7 @@ This calls the external C<egrep -i> program and returns the matching lines." }; { defaults with - name = "fgrepi"; + name = "fgrepi"; added = (1, 0, 66); style = RStringList "lines", [String "pattern"; Pathname "path"], []; proc_nr = Some 156; protocol_limit_warning = true; @@ -6698,7 +6698,7 @@ This calls the external C<fgrep -i> program and returns the matching lines." }; { defaults with - name = "zgrep"; + name = "zgrep"; added = (1, 0, 66); style = RStringList "lines", [String "regex"; Pathname "path"], []; proc_nr = Some 157; protocol_limit_warning = true; @@ -6714,7 +6714,7 @@ This calls the external C<zgrep> program and returns the matching lines." }; { defaults with - name = "zegrep"; + name = "zegrep"; added = (1, 0, 66); style = RStringList "lines", [String "regex"; Pathname "path"], []; proc_nr = Some 158; protocol_limit_warning = true; @@ -6730,7 +6730,7 @@ This calls the external C<zegrep> program and returns the matching lines." }; { defaults with - name = "zfgrep"; + name = "zfgrep"; added = (1, 0, 66); style = RStringList "lines", [String "pattern"; Pathname "path"], []; proc_nr = Some 159; protocol_limit_warning = true; @@ -6746,7 +6746,7 @@ This calls the external C<zfgrep> program and returns the matching lines." }; { defaults with - name = "zgrepi"; + name = "zgrepi"; added = (1, 0, 66); style = RStringList "lines", [String "regex"; Pathname "path"], []; proc_nr = Some 160; protocol_limit_warning = true; @@ -6762,7 +6762,7 @@ This calls the external C<zgrep -i> program and returns the matching lines." }; { defaults with - name = "zegrepi"; + name = "zegrepi"; added = (1, 0, 66); style = RStringList "lines", [String "regex"; Pathname "path"], []; proc_nr = Some 161; protocol_limit_warning = true; @@ -6778,7 +6778,7 @@ This calls the external C<zegrep -i> program and returns the matching lines." }; { defaults with - name = "zfgrepi"; + name = "zfgrepi"; added = (1, 0, 66); style = RStringList "lines", [String "pattern"; Pathname "path"], []; proc_nr = Some 162; protocol_limit_warning = true; @@ -6794,7 +6794,7 @@ This calls the external C<zfgrep -i> program and returns the matching lines." }; { defaults with - name = "realpath"; + name = "realpath"; added = (1, 0, 66); style = RString "rpath", [Pathname "path"], []; proc_nr = Some 163; tests = [ @@ -6807,7 +6807,7 @@ Return the canonicalized absolute pathname of C<path>. The returned path has no C<.>, C<..> or symbolic link path elements." }; { defaults with - name = "ln"; + name = "ln"; added = (1, 0, 66); style = RErr, [String "target"; Pathname "linkname"], []; proc_nr = Some 164; tests = [ @@ -6822,7 +6822,7 @@ returned path has no C<.>, C<..> or symbolic link path elements." }; This command creates a hard link using the C<ln> command." }; { defaults with - name = "ln_f"; + name = "ln_f"; added = (1, 0, 66); style = RErr, [String "target"; Pathname "linkname"], []; proc_nr = Some 165; tests = [ @@ -6839,7 +6839,7 @@ This command creates a hard link using the C<ln -f> command. The I<-f> option removes the link (C<linkname>) if it exists already." }; { defaults with - name = "ln_s"; + name = "ln_s"; added = (1, 0, 66); style = RErr, [String "target"; Pathname "linkname"], []; proc_nr = Some 166; tests = [ @@ -6855,7 +6855,7 @@ The I<-f> option removes the link (C<linkname>) if it exists already." }; This command creates a symbolic link using the C<ln -s> command." }; { defaults with - name = "ln_sf"; + name = "ln_sf"; added = (1, 0, 66); style = RErr, [String "target"; Pathname "linkname"], []; proc_nr = Some 167; tests = [ @@ -6871,7 +6871,7 @@ This command creates a symbolic link using the C<ln -sf> command, The I<-f> option removes the link (C<linkname>) if it exists already." }; { defaults with - name = "readlink"; + name = "readlink"; added = (1, 0, 66); style = RString "link", [Pathname "path"], []; proc_nr = Some 168; shortdesc = "read the target of a symbolic link"; @@ -6879,7 +6879,7 @@ The I<-f> option removes the link (C<linkname>) if it exists already." }; This command reads the target of a symbolic link." }; { defaults with - name = "fallocate"; + name = "fallocate"; added = (1, 0, 66); style = RErr, [Pathname "path"; Int "len"], []; proc_nr = Some 169; deprecated_by = Some "fallocate64"; @@ -6899,7 +6899,7 @@ C<alloc> command which allocates a file in the host and attaches it as a device." }; { defaults with - name = "swapon_device"; + name = "swapon_device"; added = (1, 0, 66); style = RErr, [Device "device"], []; proc_nr = Some 170; tests = [ @@ -6923,7 +6923,7 @@ information about the host to the guest this way. Instead, attach a new host device to the guest and swap on that." }; { defaults with - name = "swapoff_device"; + name = "swapoff_device"; added = (1, 0, 66); style = RErr, [Device "device"], []; proc_nr = Some 171; shortdesc = "disable swap on device"; @@ -6933,7 +6933,7 @@ device or partition named C<device>. See C<guestfs_swapon_device>." }; { defaults with - name = "swapon_file"; + name = "swapon_file"; added = (1, 0, 66); style = RErr, [Pathname "file"], []; proc_nr = Some 172; tests = [ @@ -6950,7 +6950,7 @@ This command enables swap to a file. See C<guestfs_swapon_device> for other notes." }; { defaults with - name = "swapoff_file"; + name = "swapoff_file"; added = (1, 0, 66); style = RErr, [Pathname "file"], []; proc_nr = Some 173; shortdesc = "disable swap on file"; @@ -6958,7 +6958,7 @@ See C<guestfs_swapon_device> for other notes." }; This command disables the libguestfs appliance swap on file." }; { defaults with - name = "swapon_label"; + name = "swapon_label"; added = (1, 0, 66); style = RErr, [String "label"], []; proc_nr = Some 174; tests = [ @@ -6976,7 +6976,7 @@ This command enables swap to a labeled swap partition. See C<guestfs_swapon_device> for other notes." }; { defaults with - name = "swapoff_label"; + name = "swapoff_label"; added = (1, 0, 66); style = RErr, [String "label"], []; proc_nr = Some 175; shortdesc = "disable swap on labeled swap partition"; @@ -6985,7 +6985,7 @@ This command disables the libguestfs appliance swap on labeled swap partition." }; { defaults with - name = "swapon_uuid"; + name = "swapon_uuid"; added = (1, 0, 66); style = RErr, [String "uuid"], []; proc_nr = Some 176; optional = Some "linuxfsuuid"; @@ -7002,7 +7002,7 @@ This command enables swap to a swap partition with the given UUID. See C<guestfs_swapon_device> for other notes." }; { defaults with - name = "swapoff_uuid"; + name = "swapoff_uuid"; added = (1, 0, 66); style = RErr, [String "uuid"], []; proc_nr = Some 177; optional = Some "linuxfsuuid"; @@ -7012,7 +7012,7 @@ This command disables the libguestfs appliance swap partition with the given UUID." }; { defaults with - name = "mkswap_file"; + name = "mkswap_file"; added = (1, 0, 66); style = RErr, [Pathname "path"], []; proc_nr = Some 178; tests = [ @@ -7029,7 +7029,7 @@ This command just writes a swap file signature to an existing file. To create the file itself, use something like C<guestfs_fallocate>." }; { defaults with - name = "inotify_init"; + name = "inotify_init"; added = (1, 0, 66); style = RErr, [Int "maxevents"], []; proc_nr = Some 179; optional = Some "inotify"; @@ -7074,7 +7074,7 @@ via libguestfs. Note that there is one global inotify handle per libguestfs instance." }; { defaults with - name = "inotify_add_watch"; + name = "inotify_add_watch"; added = (1, 0, 66); style = RInt64 "wd", [Pathname "path"; Int "mask"], []; proc_nr = Some 180; optional = Some "inotify"; @@ -7101,7 +7101,7 @@ defined by the Linux kernel ABI and are listed in C</usr/include/sys/inotify.h>." }; { defaults with - name = "inotify_rm_watch"; + name = "inotify_rm_watch"; added = (1, 0, 66); style = RErr, [Int(*XXX64*) "wd"], []; proc_nr = Some 181; optional = Some "inotify"; @@ -7111,7 +7111,7 @@ Remove a previously defined inotify watch. See C<guestfs_inotify_add_watch>." }; { defaults with - name = "inotify_read"; + name = "inotify_read"; added = (1, 0, 66); style = RStructList ("events", "inotify_event"), [], []; proc_nr = Some 182; optional = Some "inotify"; @@ -7129,7 +7129,7 @@ read events up to the maximum appliance-to-host message size and leave remaining events in the queue." }; { defaults with - name = "inotify_files"; + name = "inotify_files"; added = (1, 0, 66); style = RStringList "paths", [], []; proc_nr = Some 183; optional = Some "inotify"; @@ -7140,7 +7140,7 @@ which just returns a list of pathnames of objects that were touched. The returned pathnames are sorted and deduplicated." }; { defaults with - name = "inotify_close"; + name = "inotify_close"; added = (1, 0, 66); style = RErr, [], []; proc_nr = Some 184; optional = Some "inotify"; @@ -7151,7 +7151,7 @@ opened by inotify_init. It removes all watches, throws away any pending events, and deallocates all resources." }; { defaults with - name = "setcon"; + name = "setcon"; added = (1, 0, 67); style = RErr, [String "context"], []; proc_nr = Some 185; optional = Some "selinux"; @@ -7163,7 +7163,7 @@ to the string C<context>. See the documentation about SELINUX in L<guestfs(3)>." }; { defaults with - name = "getcon"; + name = "getcon"; added = (1, 0, 67); style = RString "context", [], []; proc_nr = Some 186; optional = Some "selinux"; @@ -7175,7 +7175,7 @@ See the documentation about SELINUX in L<guestfs(3)>, and C<guestfs_setcon>" }; { defaults with - name = "mkfs_b"; + name = "mkfs_b"; added = (1, 0, 68); style = RErr, [String "fstype"; Int "blocksize"; Device "device"], []; proc_nr = Some 187; deprecated_by = Some "mkfs"; @@ -7210,7 +7210,7 @@ For VFAT and NTFS the C<blocksize> parameter is treated as the requested cluster size." }; { defaults with - name = "mke2journal"; + name = "mke2journal"; added = (1, 0, 68); style = RErr, [Int "blocksize"; Device "device"], []; proc_nr = Some 188; deprecated_by = Some "mke2fs"; @@ -7233,7 +7233,7 @@ to the command: mke2fs -O journal_dev -b blocksize device" }; { defaults with - name = "mke2journal_L"; + name = "mke2journal_L"; added = (1, 0, 68); style = RErr, [Int "blocksize"; String "label"; Device "device"], []; proc_nr = Some 189; deprecated_by = Some "mke2fs"; @@ -7253,7 +7253,7 @@ to the command: This creates an ext2 external journal on C<device> with label C<label>." }; { defaults with - name = "mke2journal_U"; + name = "mke2journal_U"; added = (1, 0, 68); style = RErr, [Int "blocksize"; String "uuid"; Device "device"], []; proc_nr = Some 190; deprecated_by = Some "mke2fs"; @@ -7275,7 +7275,7 @@ This creates an ext2 external journal on C<device> with label C<label>." }; This creates an ext2 external journal on C<device> with UUID C<uuid>." }; { defaults with - name = "mke2fs_J"; + name = "mke2fs_J"; added = (1, 0, 68); style = RErr, [String "fstype"; Int "blocksize"; Device "device"; Device "journal"], []; proc_nr = Some 191; deprecated_by = Some "mke2fs"; @@ -7290,7 +7290,7 @@ to the command: See also C<guestfs_mke2journal>." }; { defaults with - name = "mke2fs_JL"; + name = "mke2fs_JL"; added = (1, 0, 68); style = RErr, [String "fstype"; Int "blocksize"; Device "device"; String "label"], []; proc_nr = Some 192; deprecated_by = Some "mke2fs"; @@ -7302,7 +7302,7 @@ an external journal on the journal labeled C<label>. See also C<guestfs_mke2journal_L>." }; { defaults with - name = "mke2fs_JU"; + name = "mke2fs_JU"; added = (1, 0, 68); style = RErr, [String "fstype"; Int "blocksize"; Device "device"; String "uuid"], []; proc_nr = Some 193; deprecated_by = Some "mke2fs"; @@ -7315,7 +7315,7 @@ an external journal on the journal with UUID C<uuid>. See also C<guestfs_mke2journal_U>." }; { defaults with - name = "modprobe"; + name = "modprobe"; added = (1, 0, 68); style = RErr, [String "modulename"], []; proc_nr = Some 194; optional = Some "linuxmodules"; @@ -7327,7 +7327,7 @@ See also C<guestfs_mke2journal_U>." }; This loads a kernel module in the appliance." }; { defaults with - name = "echo_daemon"; + name = "echo_daemon"; added = (1, 0, 69); style = RString "output", [StringList "words"], []; proc_nr = Some 195; tests = [ @@ -7346,7 +7346,7 @@ You can use this command to test the connection through to the daemon. See also C<guestfs_ping_daemon>." }; { defaults with - name = "find0"; + name = "find0"; added = (1, 0, 74); style = RErr, [Pathname "directory"; FileOut "files"], []; proc_nr = Some 196; cancellable = true; @@ -7378,7 +7378,7 @@ The result list is not sorted. =back" }; { defaults with - name = "case_sensitive_path"; + name = "case_sensitive_path"; added = (1, 0, 75); style = RString "rpath", [Pathname "path"], []; proc_nr = Some 197; tests = [ @@ -7463,7 +7463,7 @@ This function does not handle drive names, backslashes etc. See also C<guestfs_realpath>." }; { defaults with - name = "vfs_type"; + name = "vfs_type"; added = (1, 0, 75); style = RString "fstype", [Mountable "mountable"], []; proc_nr = Some 198; tests = [ @@ -7481,7 +7481,7 @@ if you mounted it without specifying the filesystem type. For example a string such as C<ext3> or C<ntfs>." }; { defaults with - name = "truncate"; + name = "truncate"; added = (1, 0, 77); style = RErr, [Pathname "path"], []; proc_nr = Some 199; tests = [ @@ -7496,7 +7496,7 @@ This command truncates C<path> to a zero-length file. The file must exist already." }; { defaults with - name = "truncate_size"; + name = "truncate_size"; added = (1, 0, 77); style = RErr, [Pathname "path"; Int64 "size"], []; proc_nr = Some 200; tests = [ @@ -7517,7 +7517,7 @@ for the file until you write to it). To create a non-sparse file of zeroes, use C<guestfs_fallocate64> instead." }; { defaults with - name = "utimens"; + name = "utimens"; added = (1, 0, 77); style = RErr, [Pathname "path"; Int64 "atsecs"; Int64 "atnsecs"; Int64 "mtsecs"; Int64 "mtnsecs"], []; proc_nr = Some 201; (* Test directories, named pipes etc (RHBZ#761451, RHBZ#761460) *) @@ -7567,7 +7567,7 @@ the corresponding timestamp is left unchanged. (The C<*secs> field is ignored in this case)." }; { defaults with - name = "mkdir_mode"; + name = "mkdir_mode"; added = (1, 0, 77); style = RErr, [Pathname "path"; Int "mode"], []; proc_nr = Some 202; tests = [ @@ -7588,7 +7588,7 @@ interpret the mode in other ways. See also C<guestfs_mkdir>, C<guestfs_umask>" }; { defaults with - name = "lchown"; + name = "lchown"; added = (1, 0, 77); style = RErr, [Int "owner"; Int "group"; Pathname "path"], []; proc_nr = Some 203; shortdesc = "change file owner and group"; @@ -7602,7 +7602,7 @@ names, you will need to locate and parse the password file yourself (Augeas support makes this relatively easy)." }; { defaults with - name = "internal_lxattrlist"; + name = "internal_lxattrlist"; added = (1, 19, 32); style = RStructList ("xattrs", "xattr"), [Pathname "path"; StringList "names"], []; proc_nr = Some 205; visibility = VInternal; @@ -7632,7 +7632,7 @@ this call to fail. The caller must split up such requests into smaller groups of names." }; { defaults with - name = "internal_readlinklist"; + name = "internal_readlinklist"; added = (1, 19, 32); style = RStringList "links", [Pathname "path"; StringList "names"], []; proc_nr = Some 206; visibility = VInternal; @@ -7661,7 +7661,7 @@ this call to fail. The caller must split up such requests into smaller groups of names." }; { defaults with - name = "pread"; + name = "pread"; added = (1, 0, 77); style = RBufferOut "content", [Pathname "path"; Int "count"; Int64 "offset"], []; proc_nr = Some 207; protocol_limit_warning = true; @@ -7684,7 +7684,7 @@ see the L<pread(2)> system call. See also C<guestfs_pwrite>, C<guestfs_pread_device>." }; { defaults with - name = "part_init"; + name = "part_init"; added = (1, 0, 78); style = RErr, [Device "device"; String "parttype"], []; proc_nr = Some 208; tests = [ @@ -7767,7 +7767,7 @@ Sun disk labels. =back" }; { defaults with - name = "part_add"; + name = "part_add"; added = (1, 0, 78); style = RErr, [Device "device"; String "prlogex"; Int64 "startsect"; Int64 "endsect"], []; proc_nr = Some 209; tests = [ @@ -7803,7 +7803,7 @@ Creating a partition which covers the whole disk is not so easy. Use C<guestfs_part_disk> to do that." }; { defaults with - name = "part_disk"; + name = "part_disk"; added = (1, 0, 78); style = RErr, [Device "device"; String "parttype"], []; proc_nr = Some 210; tests = [ @@ -7822,7 +7822,7 @@ C<parttype> is the partition table type, usually C<mbr> or C<gpt>, but other possible values are described in C<guestfs_part_init>." }; { defaults with - name = "part_set_bootable"; + name = "part_set_bootable"; added = (1, 0, 78); style = RErr, [Device "device"; Int "partnum"; Bool "bootable"], []; proc_nr = Some 211; tests = [ @@ -7840,7 +7840,7 @@ Windows) to determine which partition to boot from. It is by no means universally recognized." }; { defaults with - name = "part_set_name"; + name = "part_set_name"; added = (1, 0, 78); style = RErr, [Device "device"; Int "partnum"; String "name"], []; proc_nr = Some 212; tests = [ @@ -7857,7 +7857,7 @@ The partition name can only be set on certain types of partition table. This works on C<gpt> but not on C<mbr> partitions." }; { defaults with - name = "part_list"; + name = "part_list"; added = (1, 0, 78); style = RStructList ("partitions", "partition"), [Device "device"], []; proc_nr = Some 213; tests = [] (* XXX Add a regression test for this. *); @@ -7890,7 +7890,7 @@ Size of the partition in bytes. =back" }; { defaults with - name = "part_get_parttype"; + name = "part_get_parttype"; added = (1, 0, 78); style = RString "parttype", [Device "device"], []; proc_nr = Some 214; tests = [ @@ -7909,7 +7909,7 @@ values are possible, although unusual. See C<guestfs_part_init> for a full list." }; { defaults with - name = "fill"; + name = "fill"; added = (1, 0, 79); style = RErr, [Int "c"; Int "len"; Pathname "path"], []; proc_nr = Some 215; progress = true; @@ -7931,7 +7931,7 @@ To create a file with a pattern of repeating bytes use C<guestfs_fill_pattern>." }; { defaults with - name = "available"; + name = "available"; added = (1, 0, 80); style = RErr, [StringList "groups"], []; proc_nr = Some 216; tests = [ @@ -8005,7 +8005,7 @@ See also C<guestfs_version>. See also C<guestfs_filesystem_available>." }; { defaults with - name = "dd"; + name = "dd"; added = (1, 0, 80); style = RErr, [Dev_or_Path "src"; Dev_or_Path "dest"], []; proc_nr = Some 217; deprecated_by = Some "copy_device_to_device"; @@ -8030,7 +8030,7 @@ This command cannot do partial copies (see C<guestfs_copy_device_to_device>)." }; { defaults with - name = "filesize"; + name = "filesize"; added = (1, 0, 82); style = RInt64 "size", [Pathname "file"], []; proc_nr = Some 218; tests = [ @@ -8047,7 +8047,7 @@ C<guestfs_is_dir>, C<guestfs_is_file> etc. To get the size of block devices, use C<guestfs_blockdev_getsize64>." }; { defaults with - name = "lvrename"; + name = "lvrename"; added = (1, 0, 83); style = RErr, [String "logvol"; String "newlogvol"], []; proc_nr = Some 219; tests = [ @@ -8061,7 +8061,7 @@ To get the size of block devices, use C<guestfs_blockdev_getsize64>." }; Rename a logical volume C<logvol> with the new name C<newlogvol>." }; { defaults with - name = "vgrename"; + name = "vgrename"; added = (1, 0, 83); style = RErr, [String "volgroup"; String "newvolgroup"], []; proc_nr = Some 220; tests = [ @@ -8079,7 +8079,7 @@ Rename a logical volume C<logvol> with the new name C<newlogvol>." }; Rename a volume group C<volgroup> with the new name C<newvolgroup>." }; { defaults with - name = "initrd_cat"; + name = "initrd_cat"; added = (1, 0, 84); style = RBufferOut "content", [Pathname "initrdpath"; String "filename"], []; proc_nr = Some 221; protocol_limit_warning = true; @@ -8103,7 +8103,7 @@ contained in a Linux initrd or initramfs image: See also C<guestfs_initrd_list>." }; { defaults with - name = "pvuuid"; + name = "pvuuid"; added = (1, 0, 87); style = RString "uuid", [Device "device"], []; proc_nr = Some 222; shortdesc = "get the UUID of a physical volume"; @@ -8111,7 +8111,7 @@ See also C<guestfs_initrd_list>." }; This command returns the UUID of the LVM PV C<device>." }; { defaults with - name = "vguuid"; + name = "vguuid"; added = (1, 0, 87); style = RString "uuid", [String "vgname"], []; proc_nr = Some 223; shortdesc = "get the UUID of a volume group"; @@ -8119,7 +8119,7 @@ This command returns the UUID of the LVM PV C<device>." }; This command returns the UUID of the LVM VG named C<vgname>." }; { defaults with - name = "lvuuid"; + name = "lvuuid"; added = (1, 0, 87); style = RString "uuid", [Device "device"], []; proc_nr = Some 224; shortdesc = "get the UUID of a logical volume"; @@ -8127,7 +8127,7 @@ This command returns the UUID of the LVM VG named C<vgname>." }; This command returns the UUID of the LVM LV C<device>." }; { defaults with - name = "vgpvuuids"; + name = "vgpvuuids"; added = (1, 0, 87); style = RStringList "uuids", [String "vgname"], []; proc_nr = Some 225; shortdesc = "get the PV UUIDs containing the volume group"; @@ -8141,7 +8141,7 @@ calls to associate physical volumes and volume groups. See also C<guestfs_vglvuuids>." }; { defaults with - name = "vglvuuids"; + name = "vglvuuids"; added = (1, 0, 87); style = RStringList "uuids", [String "vgname"], []; proc_nr = Some 226; shortdesc = "get the LV UUIDs of all LVs in the volume group"; @@ -8155,7 +8155,7 @@ calls to associate logical volumes and volume groups. See also C<guestfs_vgpvuuids>." }; { defaults with - name = "copy_size"; + name = "copy_size"; added = (1, 0, 87); style = RErr, [Dev_or_Path "src"; Dev_or_Path "dest"; Int64 "size"], []; proc_nr = Some 227; progress = true; deprecated_by = Some "copy_device_to_device"; @@ -8176,7 +8176,7 @@ Note this will fail if the source is too short or if the destination is not large enough." }; { defaults with - name = "zero_device"; + name = "zero_device"; added = (1, 3, 1); style = RErr, [Device "device"], []; proc_nr = Some 228; progress = true; @@ -8195,7 +8195,7 @@ zeroes. This prevents the underlying device from becoming non-sparse or growing unnecessarily." }; { defaults with - name = "txz_in"; + name = "txz_in"; added = (1, 3, 2); style = RErr, [FileIn "tarball"; Pathname "directory"], []; proc_nr = Some 229; deprecated_by = Some "tar_in"; @@ -8212,7 +8212,7 @@ This command uploads and unpacks local file C<tarball> (an I<xz compressed> tar file) into C<directory>." }; { defaults with - name = "txz_out"; + name = "txz_out"; added = (1, 3, 2); style = RErr, [Pathname "directory"; FileOut "tarball"], []; proc_nr = Some 230; deprecated_by = Some "tar_out"; @@ -8223,7 +8223,7 @@ This command packs the contents of C<directory> and downloads it to local file C<tarball> (as an xz compressed tar archive)." }; { defaults with - name = "vgscan"; + name = "vgscan"; added = (1, 3, 2); style = RErr, [], []; proc_nr = Some 232; tests = [ @@ -8236,7 +8236,7 @@ This rescans all block devices and rebuilds the list of LVM physical volumes, volume groups and logical volumes." }; { defaults with - name = "part_del"; + name = "part_del"; added = (1, 3, 2); style = RErr, [Device "device"; Int "partnum"], []; proc_nr = Some 233; tests = [ @@ -8254,7 +8254,7 @@ extended partition also deletes any logical partitions it contains." }; { defaults with - name = "part_get_bootable"; + name = "part_get_bootable"; added = (1, 3, 2); style = RBool "bootable", [Device "device"; Int "partnum"], []; proc_nr = Some 234; tests = [ @@ -8272,7 +8272,7 @@ C<device> has the bootable flag set. See also C<guestfs_part_set_bootable>." }; { defaults with - name = "part_get_mbr_id"; + name = "part_get_mbr_id"; added = (1, 3, 2); style = RInt "idbyte", [Device "device"; Int "partnum"], []; proc_nr = Some 235; fish_output = Some FishOutputHexadecimal; @@ -8293,7 +8293,7 @@ You will get undefined results for other partition table types (see C<guestfs_part_get_parttype>)." }; { defaults with - name = "part_set_mbr_id"; + name = "part_set_mbr_id"; added = (1, 3, 2); style = RErr, [Device "device"; Int "partnum"; Int "idbyte"], []; proc_nr = Some 236; shortdesc = "set the MBR type byte (ID byte) of a partition"; @@ -8309,7 +8309,7 @@ You will get undefined results for other partition table types (see C<guestfs_part_get_parttype>)." }; { defaults with - name = "checksum_device"; + name = "checksum_device"; added = (1, 3, 2); style = RString "checksum", [String "csumtype"; Device "device"], []; proc_nr = Some 237; tests = [ @@ -8324,7 +8324,7 @@ contents of the device named C<device>. For the types of checksums supported see the C<guestfs_checksum> command." }; { defaults with - name = "lvresize_free"; + name = "lvresize_free"; added = (1, 3, 3); style = RErr, [Device "lv"; Int "percent"], []; proc_nr = Some 238; optional = Some "lvm2"; @@ -8345,7 +8345,7 @@ as much as possible, using all remaining free space in the volume group." }; { defaults with - name = "aug_clear"; + name = "aug_clear"; added = (1, 3, 4); style = RErr, [String "augpath"], []; proc_nr = Some 239; shortdesc = "clear Augeas path"; @@ -8354,7 +8354,7 @@ Set the value associated with C<path> to C<NULL>. This is the same as the L<augtool(1)> C<clear> command." }; { defaults with - name = "get_umask"; + name = "get_umask"; added = (1, 3, 4); style = RInt "mask", [], []; proc_nr = Some 240; fish_output = Some FishOutputOctal; @@ -8368,7 +8368,7 @@ Return the current umask. By default the umask is C<022> unless it has been set by calling C<guestfs_umask>." }; { defaults with - name = "debug_upload"; + name = "debug_upload"; added = (1, 3, 5); style = RErr, [FileIn "filename"; String "tmpname"; Int "mode"], []; proc_nr = Some 241; visibility = VDebug; @@ -8383,7 +8383,7 @@ to look at the file C<daemon/debug.c> in the libguestfs source to find out what it is for." }; { defaults with - name = "base64_in"; + name = "base64_in"; added = (1, 3, 5); style = RErr, [FileIn "base64file"; Pathname "filename"], []; proc_nr = Some 242; cancellable = true; @@ -8398,7 +8398,7 @@ This command uploads base64-encoded data from C<base64file> to C<filename>." }; { defaults with - name = "base64_out"; + name = "base64_out"; added = (1, 3, 5); style = RErr, [Pathname "filename"; FileOut "base64file"], []; proc_nr = Some 243; cancellable = true; @@ -8408,7 +8408,7 @@ This command downloads the contents of C<filename>, writing it out to local file C<base64file> encoded as base64." }; { defaults with - name = "checksums_out"; + name = "checksums_out"; added = (1, 3, 7); style = RErr, [String "csumtype"; Pathname "directory"; FileOut "sumsfile"], []; proc_nr = Some 244; cancellable = true; @@ -8427,7 +8427,7 @@ backslash syntax. For more information, see the GNU coreutils info file." }; { defaults with - name = "fill_pattern"; + name = "fill_pattern"; added = (1, 3, 12); style = RErr, [String "pattern"; Int "len"; Pathname "path"], []; proc_nr = Some 245; progress = true; @@ -8445,7 +8445,7 @@ of bytes in C<pattern>. The pattern is truncated if necessary to ensure the length of the file is exactly C<len> bytes." }; { defaults with - name = "internal_write"; + name = "internal_write"; added = (1, 19, 32); style = RErr, [Pathname "path"; BufferIn "content"], []; proc_nr = Some 246; visibility = VInternal; @@ -8478,7 +8478,7 @@ file is the string C<content> (which can contain any 8 bit data). See also C<guestfs_write_append>." }; { defaults with - name = "pwrite"; + name = "pwrite"; added = (1, 3, 14); style = RInt "nbytes", [Pathname "path"; BufferIn "content"; Int64 "offset"], []; proc_nr = Some 247; protocol_limit_warning = true; @@ -8510,7 +8510,7 @@ unlikely for regular files in ordinary circumstances. See also C<guestfs_pread>, C<guestfs_pwrite_device>." }; { defaults with - name = "resize2fs_size"; + name = "resize2fs_size"; added = (1, 3, 14); style = RErr, [Device "device"; Int64 "size"], []; proc_nr = Some 248; shortdesc = "resize an ext2, ext3 or ext4 filesystem (with size)"; @@ -8521,7 +8521,7 @@ allows you to specify the new size (in bytes) explicitly. See also L<guestfs(3)/RESIZE2FS ERRORS>." }; { defaults with - name = "pvresize_size"; + name = "pvresize_size"; added = (1, 3, 14); style = RErr, [Device "device"; Int64 "size"], []; proc_nr = Some 249; optional = Some "lvm2"; @@ -8531,7 +8531,7 @@ This command is the same as C<guestfs_pvresize> except that it allows you to specify the new size (in bytes) explicitly." }; { defaults with - name = "ntfsresize_size"; + name = "ntfsresize_size"; added = (1, 3, 14); style = RErr, [Device "device"; Int64 "size"], []; proc_nr = Some 250; optional = Some "ntfsprogs"; deprecated_by = Some "ntfsresize"; @@ -8541,7 +8541,7 @@ This command is the same as C<guestfs_ntfsresize> except that it allows you to specify the new size (in bytes) explicitly." }; { defaults with - name = "available_all_groups"; + name = "available_all_groups"; added = (1, 3, 15); style = RStringList "groups", [], []; proc_nr = Some 251; tests = [ @@ -8559,7 +8559,7 @@ See also C<guestfs_available>, C<guestfs_feature_available> and L<guestfs(3)/AVAILABILITY>." }; { defaults with - name = "fallocate64"; + name = "fallocate64"; added = (1, 3, 17); style = RErr, [Pathname "path"; Int64 "len"], []; proc_nr = Some 252; tests = [ @@ -8586,7 +8586,7 @@ C<alloc> and C<sparse> commands which create a file in the host and attach it as a device." }; { defaults with - name = "vfs_label"; + name = "vfs_label"; added = (1, 3, 18); style = RString "label", [Mountable "mountable"], []; proc_nr = Some 253; tests = [ @@ -8612,7 +8612,7 @@ If the filesystem is unlabeled, this returns the empty string. To find a filesystem from the label, use C<guestfs_findfs_label>." }; { defaults with - name = "vfs_uuid"; + name = "vfs_uuid"; added = (1, 3, 18); style = RString "uuid", [Mountable "mountable"], []; fish_alias = ["get-uuid"]; proc_nr = Some 254; @@ -8631,7 +8631,7 @@ If the filesystem does not have a UUID, this returns the empty string. To find a filesystem from the UUID, use C<guestfs_findfs_uuid>." }; { defaults with - name = "lvm_set_filter"; + name = "lvm_set_filter"; added = (1, 5, 1); style = RErr, [DeviceList "devices"], []; proc_nr = Some 255; optional = Some "lvm2"; @@ -8662,7 +8662,7 @@ contains a mounted filesystem), even if you are not filtering out that VG." }; { defaults with - name = "lvm_clear_filter"; + name = "lvm_clear_filter"; added = (1, 5, 1); style = RErr, [], []; proc_nr = Some 256; test_excuse = "cannot be tested with the current framework because the VG is being used by the mounted filesystem, so the 'vgchange -an' command we do first will fail"; @@ -8675,7 +8675,7 @@ This command also clears the LVM cache and performs a volume group scan." }; { defaults with - name = "luks_open"; + name = "luks_open"; added = (1, 5, 1); style = RErr, [Device "device"; Key "key"; String "mapname"], []; proc_nr = Some 257; optional = Some "luks"; @@ -8701,7 +8701,7 @@ Use C<guestfs_list_dm_devices> to list all device mapper devices." }; { defaults with - name = "luks_open_ro"; + name = "luks_open_ro"; added = (1, 5, 1); style = RErr, [Device "device"; Key "key"; String "mapname"], []; proc_nr = Some 258; optional = Some "luks"; @@ -8711,7 +8711,7 @@ This is the same as C<guestfs_luks_open> except that a read-only mapping is created." }; { defaults with - name = "luks_close"; + name = "luks_close"; added = (1, 5, 1); style = RErr, [Device "device"], []; proc_nr = Some 259; optional = Some "luks"; @@ -8724,7 +8724,7 @@ device (ie. C</dev/mapper/mapname>) and I<not> the name of the underlying block device." }; { defaults with - name = "luks_format"; + name = "luks_format"; added = (1, 5, 2); style = RErr, [Device "device"; Key "key"; Int "keyslot"], []; proc_nr = Some 260; optional = Some "luks"; @@ -8736,7 +8736,7 @@ initial key, which is added to key slot C<slot>. (LUKS supports 8 key slots, numbered 0-7)." }; { defaults with - name = "luks_format_cipher"; + name = "luks_format_cipher"; added = (1, 5, 2); style = RErr, [Device "device"; Key "key"; Int "keyslot"; String "cipher"], []; proc_nr = Some 261; optional = Some "luks"; @@ -8746,7 +8746,7 @@ This command is the same as C<guestfs_luks_format> but it also allows you to set the C<cipher> used." }; { defaults with - name = "luks_add_key"; + name = "luks_add_key"; added = (1, 5, 2); style = RErr, [Device "device"; Key "key"; Key "newkey"; Int "keyslot"], []; proc_nr = Some 262; optional = Some "luks"; @@ -8762,7 +8762,7 @@ command will fail. You have to use C<guestfs_luks_kill_slot> first to remove that key." }; { defaults with - name = "luks_kill_slot"; + name = "luks_kill_slot"; added = (1, 5, 2); style = RErr, [Device "device"; Key "key"; Int "keyslot"], []; proc_nr = Some 263; optional = Some "luks"; @@ -8773,7 +8773,7 @@ encrypted LUKS device C<device>. C<key> must be one of the I<other> keys." }; { defaults with - name = "is_lv"; + name = "is_lv"; added = (1, 5, 3); style = RBool "lvflag", [Device "device"], []; proc_nr = Some 264; tests = [ @@ -8788,7 +8788,7 @@ This command tests whether C<device> is a logical volume, and returns true iff this is the case." }; { defaults with - name = "findfs_uuid"; + name = "findfs_uuid"; added = (1, 5, 3); style = RString "device", [String "uuid"], []; proc_nr = Some 265; shortdesc = "find a filesystem by UUID"; @@ -8800,7 +8800,7 @@ filesystem can be found. To find the UUID of a filesystem, use C<guestfs_vfs_uuid>." }; { defaults with - name = "findfs_label"; + name = "findfs_label"; added = (1, 5, 3); style = RString "device", [String "label"], []; proc_nr = Some 266; shortdesc = "find a filesystem by label"; @@ -8812,7 +8812,7 @@ filesystem can be found. To find the label of a filesystem, use C<guestfs_vfs_label>." }; { defaults with - name = "is_chardev"; + name = "is_chardev"; added = (1, 5, 10); style = RBool "flag", [Pathname "path"], [OBool "followsymlinks"]; proc_nr = Some 267; once_had_no_optargs = true; @@ -8835,7 +8835,7 @@ function to return true. See also C<guestfs_stat>." }; { defaults with - name = "is_blockdev"; + name = "is_blockdev"; added = (1, 5, 10); style = RBool "flag", [Pathname "path"], [OBool "followsymlinks"]; proc_nr = Some 268; once_had_no_optargs = true; @@ -8862,7 +8862,7 @@ C<path> parameter of this call. See also C<guestfs_stat>." }; { defaults with - name = "is_fifo"; + name = "is_fifo"; added = (1, 5, 10); style = RBool "flag", [Pathname "path"], [OBool "followsymlinks"]; proc_nr = Some 269; once_had_no_optargs = true; @@ -8885,7 +8885,7 @@ function to return true. See also C<guestfs_stat>." }; { defaults with - name = "is_symlink"; + name = "is_symlink"; added = (1, 5, 10); style = RBool "flag", [Pathname "path"], []; proc_nr = Some 270; tests = [ @@ -8902,7 +8902,7 @@ with the given C<path> name. See also C<guestfs_stat>." }; { defaults with - name = "is_socket"; + name = "is_socket"; added = (1, 5, 10); style = RBool "flag", [Pathname "path"], [OBool "followsymlinks"]; proc_nr = Some 271; once_had_no_optargs = true; @@ -8923,7 +8923,7 @@ function to return true. See also C<guestfs_stat>." }; { defaults with - name = "part_to_dev"; + name = "part_to_dev"; added = (1, 5, 15); style = RString "device", [Device "partition"], []; proc_nr = Some 272; tests = [ @@ -8944,7 +8944,7 @@ from C<guestfs_list_partitions>. See also C<guestfs_part_to_partnum>, C<guestfs_device_index>." }; { defaults with - name = "upload_offset"; + name = "upload_offset"; added = (1, 5, 17); style = RErr, [FileIn "filename"; Dev_or_Path "remotefilename"; Int64 "offset"], []; proc_nr = Some 273; progress = true; cancellable = true; @@ -8974,7 +8974,7 @@ error occurs. See also C<guestfs_upload>, C<guestfs_pwrite>." }; { defaults with - name = "download_offset"; + name = "download_offset"; added = (1, 5, 17); style = RErr, [Dev_or_Path "remotefilename"; FileOut "filename"; Int64 "offset"; Int64 "size"], []; proc_nr = Some 274; progress = true; cancellable = true; @@ -9007,7 +9007,7 @@ error occurs. See also C<guestfs_download>, C<guestfs_pread>." }; { defaults with - name = "pwrite_device"; + name = "pwrite_device"; added = (1, 5, 20); style = RInt "nbytes", [Device "device"; BufferIn "content"; Int64 "offset"], []; proc_nr = Some 275; protocol_limit_warning = true; @@ -9031,7 +9031,7 @@ probably impossible with standard Linux kernels). See also C<guestfs_pwrite>." }; { defaults with - name = "pread_device"; + name = "pread_device"; added = (1, 5, 21); style = RBufferOut "content", [Device "device"; Int "count"; Int64 "offset"], []; proc_nr = Some 276; protocol_limit_warning = true; @@ -9051,7 +9051,7 @@ see the L<pread(2)> system call. See also C<guestfs_pread>." }; { defaults with - name = "lvm_canonical_lv_name"; + name = "lvm_canonical_lv_name"; added = (1, 5, 24); style = RString "lv", [Device "lvname"], []; proc_nr = Some 277; tests = [ @@ -9072,7 +9072,7 @@ not refer to a logical volume. See also C<guestfs_is_lv>, C<guestfs_canonical_device_name>." }; { defaults with - name = "mkfs"; + name = "mkfs"; added = (0, 0, 8); style = RErr, [String "fstype"; Device "device"], [OInt "blocksize"; OString "features"; OInt "inode"; OInt "sectorsize"; OString "label"]; proc_nr = Some 278; once_had_no_optargs = true; @@ -9128,7 +9128,7 @@ which sets sector size for ufs filesystem. =back" }; { defaults with - name = "getxattr"; + name = "getxattr"; added = (1, 7, 24); style = RBufferOut "xattr", [Pathname "path"; String "name"], []; proc_nr = Some 279; optional = Some "linuxxattrs"; @@ -9151,7 +9151,7 @@ is no extended attribute named C<name>, this returns an error. See also: C<guestfs_getxattrs>, C<guestfs_lgetxattr>, L<attr(5)>." }; { defaults with - name = "lgetxattr"; + name = "lgetxattr"; added = (1, 7, 24); style = RBufferOut "xattr", [Pathname "path"; String "name"], []; proc_nr = Some 280; optional = Some "linuxxattrs"; @@ -9174,7 +9174,7 @@ is no extended attribute named C<name>, this returns an error. See also: C<guestfs_lgetxattrs>, C<guestfs_getxattr>, L<attr(5)>." }; { defaults with - name = "resize2fs_M"; + name = "resize2fs_M"; added = (1, 9, 4); style = RErr, [Device "device"], []; proc_nr = Some 281; shortdesc = "resize an ext2, ext3 or ext4 filesystem to the minimum size"; @@ -9191,7 +9191,7 @@ resulting size of the minimal filesystem in bytes. See also L<guestfs(3)/RESIZE2FS ERRORS>." }; { defaults with - name = "internal_autosync"; + name = "internal_autosync"; added = (1, 9, 7); style = RErr, [], []; proc_nr = Some 282; visibility = VInternal; @@ -9204,7 +9204,7 @@ control whether or not this operation is performed when the handle is closed." }; { defaults with - name = "is_zero"; + name = "is_zero"; added = (1, 11, 8); style = RBool "zeroflag", [Pathname "path"], []; proc_nr = Some 283; tests = [ @@ -9219,7 +9219,7 @@ This returns true iff the file exists and the file is empty or it contains all zero bytes." }; { defaults with - name = "is_zero_device"; + name = "is_zero_device"; added = (1, 11, 8); style = RBool "zeroflag", [Device "device"], []; proc_nr = Some 284; tests = [ @@ -9237,7 +9237,7 @@ This returns true iff the device exists and contains all zero bytes. Note that for large devices this can take a long time to run." }; { defaults with - name = "list_9p"; + name = "list_9p"; added = (1, 11, 12); style = RStringList "mounttags", [], []; proc_nr = Some 285; shortdesc = "list 9p filesystems"; @@ -9246,7 +9246,7 @@ List all 9p filesystems attached to the guest. A list of mount tags is returned." }; { defaults with - name = "mount_9p"; + name = "mount_9p"; added = (1, 11, 12); style = RErr, [String "mounttag"; String "mountpoint"], [OString "options"]; proc_nr = Some 286; camel_name = "Mount9P"; @@ -9260,7 +9260,7 @@ Any other options required can be passed in the optional C<options> parameter." }; { defaults with - name = "list_dm_devices"; + name = "list_dm_devices"; added = (1, 11, 15); style = RStringList "devices", [], []; proc_nr = Some 287; shortdesc = "list device mapper devices"; @@ -9275,7 +9275,7 @@ returned in this list. Call C<guestfs_lvs> if you want to list logical volumes." }; { defaults with - name = "ntfsresize"; + name = "ntfsresize"; added = (1, 3, 2); style = RErr, [Device "device"], [OInt64 "size"; OBool "force"]; once_had_no_optargs = true; proc_nr = Some 288; @@ -9311,7 +9311,7 @@ single filesystem without booting into Windows between each resize. See also L<ntfsresize(8)>." }; { defaults with - name = "btrfs_filesystem_resize"; + name = "btrfs_filesystem_resize"; added = (1, 11, 17); style = RErr, [Pathname "mountpoint"], [OInt64 "size"]; proc_nr = Some 289; optional = Some "btrfs"; camel_name = "BTRFSFilesystemResize"; @@ -9337,7 +9337,7 @@ is resized to the maximum size. See also L<btrfs(8)>." }; { defaults with - name = "internal_write_append"; + name = "internal_write_append"; added = (1, 19, 32); style = RErr, [Pathname "path"; BufferIn "content"], []; proc_nr = Some 290; visibility = VInternal; @@ -9358,7 +9358,7 @@ C<path> does not exist, then a new file is created. See also C<guestfs_write>." }; { defaults with - name = "compress_out"; + name = "compress_out"; added = (1, 13, 15); style = RErr, [String "ctype"; Pathname "file"; FileOut "zfile"], [OInt "level"]; proc_nr = Some 291; cancellable = true; @@ -9378,7 +9378,7 @@ meaning and default for this parameter depends on the compression program being used." }; { defaults with - name = "compress_device_out"; + name = "compress_device_out"; added = (1, 13, 15); style = RErr, [String "ctype"; Device "device"; FileOut "zdevice"], [OInt "level"]; proc_nr = Some 292; cancellable = true; @@ -9391,7 +9391,7 @@ The C<ctype> and optional C<level> parameters have the same meaning as in C<guestfs_compress_out>." }; { defaults with - name = "part_to_partnum"; + name = "part_to_partnum"; added = (1, 13, 25); style = RInt "partnum", [Device "partition"], []; proc_nr = Some 293; tests = [ @@ -9411,7 +9411,7 @@ from C<guestfs_list_partitions>. See also C<guestfs_part_to_dev>." }; { defaults with - name = "copy_device_to_device"; + name = "copy_device_to_device"; added = (1, 13, 25); style = RErr, [Device "src"; Device "dest"], [OInt64 "srcoffset"; OInt64 "destoffset"; OInt64 "size"; OBool "sparse"]; proc_nr = Some 294; progress = true; @@ -9443,7 +9443,7 @@ the target is already zeroed, using this option will result in incorrect copying." }; { defaults with - name = "copy_device_to_file"; + name = "copy_device_to_file"; added = (1, 13, 25); style = RErr, [Device "src"; Pathname "dest"], [OInt64 "srcoffset"; OInt64 "destoffset"; OInt64 "size"; OBool "sparse"]; proc_nr = Some 295; progress = true; @@ -9453,7 +9453,7 @@ See C<guestfs_copy_device_to_device> for a general overview of this call." }; { defaults with - name = "copy_file_to_device"; + name = "copy_file_to_device"; added = (1, 13, 25); style = RErr, [Pathname "src"; Device "dest"], [OInt64 "srcoffset"; OInt64 "destoffset"; OInt64 "size"; OBool "sparse"]; proc_nr = Some 296; progress = true; @@ -9463,7 +9463,7 @@ See C<guestfs_copy_device_to_device> for a general overview of this call." }; { defaults with - name = "copy_file_to_file"; + name = "copy_file_to_file"; added = (1, 13, 25); style = RErr, [Pathname "src"; Pathname "dest"], [OInt64 "srcoffset"; OInt64 "destoffset"; OInt64 "size"; OBool "sparse"]; proc_nr = Some 297; progress = true; @@ -9494,7 +9494,7 @@ C<guestfs_cp_a> and C<guestfs_mv> for general file copying and moving functions." }; { defaults with - name = "tune2fs"; + name = "tune2fs"; added = (1, 15, 4); style = RErr, [Device "device"], [OBool "force"; OInt "maxmountcount"; OInt "mountcount"; OString "errorbehavior"; OInt64 "group"; OInt "intervalbetweenchecks"; OInt "reservedblockspercentage"; OString "lastmounteddirectory"; OInt64 "reservedblockscount"; OInt64 "user"]; proc_nr = Some 298; camel_name = "Tune2FS"; @@ -9596,7 +9596,7 @@ C<guestfs_tune2fs_l>. For precise details of how tune2fs works, see the L<tune2fs(8)> man page." }; { defaults with - name = "md_create"; + name = "md_create"; added = (1, 15, 6); style = RErr, [String "name"; DeviceList "devices"], [OInt64 "missingbitmap"; OInt "nrdevices"; OInt "spare"; OInt64 "chunk"; OString "level"]; proc_nr = Some 299; optional = Some "mdadm"; camel_name = "MDCreate"; @@ -9657,7 +9657,7 @@ If not set, this defaults to C<raid1>. =back" }; { defaults with - name = "list_md_devices"; + name = "list_md_devices"; added = (1, 15, 4); style = RStringList "devices", [], []; proc_nr = Some 300; shortdesc = "list Linux md (RAID) devices"; @@ -9665,7 +9665,7 @@ If not set, this defaults to C<raid1>. List all Linux md devices." }; { defaults with - name = "md_detail"; + name = "md_detail"; added = (1, 15, 6); style = RHashtable "info", [Device "md"], []; proc_nr = Some 301; optional = Some "mdadm"; @@ -9700,7 +9700,7 @@ The name of the MD device. =back" }; { defaults with - name = "md_stop"; + name = "md_stop"; added = (1, 15, 6); style = RErr, [Device "md"], []; proc_nr = Some 302; optional = Some "mdadm"; @@ -9710,7 +9710,7 @@ This command deactivates the MD array named C<md>. The device is stopped, but it is not destroyed or zeroed." }; { defaults with - name = "blkid"; + name = "blkid"; added = (1, 15, 9); style = RHashtable "info", [Device "device"], []; proc_nr = Some 303; tests = [ @@ -9753,7 +9753,7 @@ The usage of this device, for example C<filesystem> or C<raid>. =back" }; { defaults with - name = "e2fsck"; + name = "e2fsck"; added = (1, 15, 17); style = RErr, [Device "device"], [OBool "correct"; OBool "forceall"]; proc_nr = Some 304; shortdesc = "check an ext2/ext3 filesystem"; @@ -9781,7 +9781,7 @@ This option may not be specified at the same time as the C<correct> option. =back" }; { defaults with - name = "llz"; + name = "llz"; added = (1, 17, 6); style = RString "listing", [Pathname "directory"], []; proc_nr = Some 305; shortdesc = "list the files in a directory (long format with SELinux contexts)"; @@ -9792,7 +9792,7 @@ This command is mostly useful for interactive sessions. It is I<not> intended that you try to parse the output string." }; { defaults with - name = "wipefs"; + name = "wipefs"; added = (1, 17, 6); style = RErr, [Device "device"], []; proc_nr = Some 306; optional = Some "wipefs"; @@ -9813,7 +9813,7 @@ Compare with C<guestfs_zero> which zeroes the first few blocks of a device." }; { defaults with - name = "ntfsfix"; + name = "ntfsfix"; added = (1, 17, 9); style = RErr, [Device "device"], [OBool "clearbadsectors"]; proc_nr = Some 307; optional = Some "ntfs3g"; @@ -9835,7 +9835,7 @@ The optional C<clearbadsectors> flag clears the list of bad sectors. This is useful after cloning a disk with bad sectors to a new disk." }; { defaults with - name = "ntfsclone_out"; + name = "ntfsclone_out"; added = (1, 17, 9); style = RErr, [Device "device"; FileOut "backupfile"], [OBool "metadataonly"; OBool "rescue"; OBool "ignorefscheck"; OBool "preservetimestamps"; OBool "force"]; proc_nr = Some 308; optional = Some "ntfs3g"; cancellable = true; @@ -9858,7 +9858,7 @@ Use C<guestfs_ntfsclone_in> to restore the file back to a libguestfs device." }; { defaults with - name = "ntfsclone_in"; + name = "ntfsclone_in"; added = (1, 17, 9); style = RErr, [FileIn "backupfile"; Device "device"], []; proc_nr = Some 309; optional = Some "ntfs3g"; cancellable = true; @@ -9870,7 +9870,7 @@ C<guestfs_ntfsclone_out>) to C<device>, overwriting any existing contents of this device." }; { defaults with - name = "set_label"; + name = "set_label"; added = (1, 17, 9); style = RErr, [Mountable "mountable"; String "label"], []; proc_nr = Some 310; tests = [ @@ -9919,7 +9919,7 @@ when trying to set the label. To read the label on a filesystem, call C<guestfs_vfs_label>." }; { defaults with - name = "zero_free_space"; + name = "zero_free_space"; added = (1, 17, 18); style = RErr, [Pathname "directory"], []; proc_nr = Some 311; progress = true; @@ -9940,7 +9940,7 @@ C<guestfs_fstrim> either as an alternative to this, or after calling this, depending on your requirements." }; { defaults with - name = "lvcreate_free"; + name = "lvcreate_free"; added = (1, 17, 18); style = RErr, [String "logvol"; String "volgroup"; Int "percent"], []; proc_nr = Some 312; optional = Some "lvm2"; @@ -9964,7 +9964,7 @@ in the volume group. Most usefully, when C<percent> is C<100> this will create the largest possible LV." }; { defaults with - name = "isoinfo_device"; + name = "isoinfo_device"; added = (1, 17, 19); style = RStruct ("isodata", "isoinfo"), [Device "device"], []; proc_nr = Some 313; tests = [ @@ -9991,7 +9991,7 @@ For information on the primary volume descriptor fields, see L<http://wiki.osdev.org/ISO_9660#The_Primary_Volume_Descriptor>" }; { defaults with - name = "isoinfo"; + name = "isoinfo"; added = (1, 17, 19); style = RStruct ("isodata", "isoinfo"), [Pathname "isofile"], []; proc_nr = Some 314; shortdesc = "get ISO information from primary volume descriptor of ISO file"; @@ -10003,7 +10003,7 @@ as a libguestfs device, you would I<not> call this. Instead you would call C<guestfs_isoinfo_device>." }; { defaults with - name = "vgmeta"; + name = "vgmeta"; added = (1, 17, 20); style = RBufferOut "metadata", [String "vgname"], []; proc_nr = Some 315; optional = Some "lvm2"; @@ -10016,7 +10016,7 @@ Note that the metadata is an internal structure used by LVM, subject to change at any time, and is provided for information only." }; { defaults with - name = "md_stat"; + name = "md_stat"; added = (1, 17, 21); style = RStructList ("devices", "mdstat"), [Device "md"], []; proc_nr = Some 316; optional = Some "mdadm"; @@ -10068,7 +10068,7 @@ replacement =back" }; { defaults with - name = "mkfs_btrfs"; + name = "mkfs_btrfs"; added = (1, 17, 25); style = RErr, [DeviceList "devices"], [OInt64 "allocstart"; OInt64 "bytecount"; OString "datatype"; OInt "leafsize"; OString "label"; OString "metadata"; OInt "nodesize"; OInt "sectorsize"]; proc_nr = Some 317; optional = Some "btrfs"; @@ -10088,7 +10088,7 @@ non-empty list of devices. To create general filesystems, use C<guestfs_mkfs>." }; { defaults with - name = "get_e2attrs"; + name = "get_e2attrs"; added = (1, 17, 31); style = RString "attrs", [Pathname "file"], []; proc_nr = Some 318; tests = [ @@ -10237,7 +10237,7 @@ Don't confuse these attributes with extended attributes (see C<guestfs_getxattr>)." }; { defaults with - name = "set_e2attrs"; + name = "set_e2attrs"; added = (1, 17, 31); style = RErr, [Pathname "file"; String "attrs"], [OBool "clear"]; proc_nr = Some 319; shortdesc = "set ext2 file attributes of a file"; @@ -10263,7 +10263,7 @@ an ext2/3/4 filesystem. Using this call on other filesystem types will result in an error." }; { defaults with - name = "get_e2generation"; + name = "get_e2generation"; added = (1, 17, 31); style = RInt64 "generation", [Pathname "file"], []; proc_nr = Some 320; tests = [ @@ -10285,7 +10285,7 @@ types will result in an error. See C<guestfs_set_e2generation>." }; { defaults with - name = "set_e2generation"; + name = "set_e2generation"; added = (1, 17, 31); style = RErr, [Pathname "file"; Int64 "generation"], []; proc_nr = Some 321; shortdesc = "set ext2 file generation of a file"; @@ -10295,7 +10295,7 @@ This sets the ext2 file generation of a file. See C<guestfs_get_e2generation>." }; { defaults with - name = "btrfs_subvolume_snapshot"; + name = "btrfs_subvolume_snapshot"; added = (1, 17, 35); style = RErr, [Pathname "source"; Pathname "dest"], [OBool "ro"; OString "qgroupid"]; proc_nr = Some 322; once_had_no_optargs = true; @@ -10322,7 +10322,7 @@ optional parameter C<qgroupid> represents the qgroup which the newly created snapshot will be added to." }; { defaults with - name = "btrfs_subvolume_delete"; + name = "btrfs_subvolume_delete"; added = (1, 17, 35); style = RErr, [Pathname "subvolume"], []; proc_nr = Some 323; optional = Some "btrfs"; camel_name = "BTRFSSubvolumeDelete"; @@ -10338,7 +10338,7 @@ newly created snapshot will be added to." }; Delete the named btrfs subvolume or snapshot." }; { defaults with - name = "btrfs_subvolume_create"; + name = "btrfs_subvolume_create"; added = (1, 17, 35); style = RErr, [Pathname "dest"], [OString "qgroupid"]; proc_nr = Some 324; once_had_no_optargs = true; @@ -10351,7 +10351,7 @@ The optional parameter C<qgroupid> represents the qgroup which the newly created subvolume will be added to." }; { defaults with - name = "btrfs_subvolume_list"; + name = "btrfs_subvolume_list"; added = (1, 17, 35); style = RStructList ("subvolumes", "btrfssubvolume"), [Mountable_or_Path "fs"], []; proc_nr = Some 325; optional = Some "btrfs"; camel_name = "BTRFSSubvolumeList"; @@ -10362,7 +10362,7 @@ List the btrfs snapshots and subvolumes of the btrfs filesystem which is mounted at C<fs>." }; { defaults with - name = "btrfs_subvolume_set_default"; + name = "btrfs_subvolume_set_default"; added = (1, 17, 35); style = RErr, [Int64 "id"; Pathname "fs"], []; proc_nr = Some 326; optional = Some "btrfs"; camel_name = "BTRFSSubvolumeSetDefault"; @@ -10374,7 +10374,7 @@ be mounted by default. See C<guestfs_btrfs_subvolume_list> to get a list of subvolumes." }; { defaults with - name = "btrfs_filesystem_sync"; + name = "btrfs_filesystem_sync"; added = (1, 17, 35); style = RErr, [Pathname "fs"], []; proc_nr = Some 327; optional = Some "btrfs"; camel_name = "BTRFSFilesystemSync"; @@ -10391,7 +10391,7 @@ get a list of subvolumes." }; Force sync on the btrfs filesystem mounted at C<fs>." }; { defaults with - name = "btrfs_filesystem_balance"; + name = "btrfs_filesystem_balance"; added = (1, 17, 35); style = RErr, [Pathname "fs"], []; fish_alias = ["btrfs-balance"]; proc_nr = Some 328; @@ -10402,7 +10402,7 @@ Balance the chunks in the btrfs filesystem mounted at C<fs> across the underlying devices." }; { defaults with - name = "btrfs_device_add"; + name = "btrfs_device_add"; added = (1, 17, 35); style = RErr, [DeviceList "devices"; Pathname "fs"], []; proc_nr = Some 329; optional = Some "btrfs"; camel_name = "BTRFSDeviceAdd"; @@ -10413,7 +10413,7 @@ Add the list of device(s) in C<devices> to the btrfs filesystem mounted at C<fs>. If C<devices> is an empty list, this does nothing." }; { defaults with - name = "btrfs_device_delete"; + name = "btrfs_device_delete"; added = (1, 17, 35); style = RErr, [DeviceList "devices"; Pathname "fs"], []; proc_nr = Some 330; optional = Some "btrfs"; camel_name = "BTRFSDeviceDelete"; @@ -10424,7 +10424,7 @@ Remove the C<devices> from the btrfs filesystem mounted at C<fs>. If C<devices> is an empty list, this does nothing." }; { defaults with - name = "btrfs_set_seeding"; + name = "btrfs_set_seeding"; added = (1, 17, 43); style = RErr, [Device "device"; Bool "seeding"], []; proc_nr = Some 331; optional = Some "btrfs"; @@ -10440,7 +10440,7 @@ Enable or disable the seeding feature of a device that contains a btrfs filesystem." }; { defaults with - name = "btrfs_fsck"; + name = "btrfs_fsck"; added = (1, 17, 43); style = RErr, [Device "device"], [OInt64 "superblock"; OBool "repair"]; proc_nr = Some 332; optional = Some "btrfs"; @@ -10455,7 +10455,7 @@ Used to check a btrfs filesystem, C<device> is the device file where the filesystem is stored." }; { defaults with - name = "filesystem_available"; + name = "filesystem_available"; added = (1, 19, 5); style = RBool "fsavail", [String "filesystem"], []; proc_nr = Some 333; shortdesc = "check if filesystem is available"; @@ -10477,7 +10477,7 @@ See also C<guestfs_available>, C<guestfs_feature_available>, L<guestfs(3)/AVAILABILITY>." }; { defaults with - name = "fstrim"; + name = "fstrim"; added = (1, 19, 6); style = RErr, [Pathname "mountpoint"], [OInt64 "offset"; OInt64 "length"; OInt64 "minimumfreeextent"]; proc_nr = Some 334; optional = Some "fstrim"; @@ -10502,7 +10502,7 @@ into zeroes. It is valid to call C<guestfs_fstrim> either instead of, or after calling C<guestfs_zero_free_space>." }; { defaults with - name = "device_index"; + name = "device_index"; added = (1, 19, 7); style = RInt "index", [Device "device"], []; proc_nr = Some 335; tests = [ @@ -10520,7 +10520,7 @@ for example as a string returned from C<guestfs_list_devices>. See also C<guestfs_list_devices>, C<guestfs_part_to_dev>." }; { defaults with - name = "nr_devices"; + name = "nr_devices"; added = (1, 19, 15); style = RInt "nrdisks", [], []; proc_nr = Some 336; tests = [ @@ -10537,7 +10537,7 @@ To find out the maximum number of devices that could be added, call C<guestfs_max_disks>." }; { defaults with - name = "xfs_info"; + name = "xfs_info"; added = (1, 19, 21); style = RStruct ("info", "xfsinfo"), [Dev_or_Path "pathordevice"], []; proc_nr = Some 337; optional = Some "xfs"; @@ -10558,7 +10558,7 @@ fields are returned as C<-1> (for numeric fields) or empty string." }; { defaults with - name = "pvchange_uuid"; + name = "pvchange_uuid"; added = (1, 19, 26); style = RErr, [Device "device"], []; proc_nr = Some 338; optional = Some "lvm2"; @@ -10573,7 +10573,7 @@ string." }; Generate a new random UUID for the physical volume C<device>." }; { defaults with - name = "pvchange_uuid_all"; + name = "pvchange_uuid_all"; added = (1, 19, 26); style = RErr, [], []; proc_nr = Some 339; optional = Some "lvm2"; @@ -10588,7 +10588,7 @@ Generate a new random UUID for the physical volume C<device>." }; Generate new random UUIDs for all physical volumes." }; { defaults with - name = "vgchange_uuid"; + name = "vgchange_uuid"; added = (1, 19, 26); style = RErr, [String "vg"], []; proc_nr = Some 340; optional = Some "lvm2"; @@ -10604,7 +10604,7 @@ Generate new random UUIDs for all physical volumes." }; Generate a new random UUID for the volume group C<vg>." }; { defaults with - name = "vgchange_uuid_all"; + name = "vgchange_uuid_all"; added = (1, 19, 26); style = RErr, [], []; proc_nr = Some 341; optional = Some "lvm2"; @@ -10620,7 +10620,7 @@ Generate a new random UUID for the volume group C<vg>." }; Generate new random UUIDs for all volume groups." }; { defaults with - name = "utsname"; + name = "utsname"; added = (1, 19, 27); style = RStruct ("uts", "utsname"), [], []; proc_nr = Some 342; tests = [ @@ -10634,7 +10634,7 @@ available. This information is only useful for debugging. Nothing in the returned structure is defined by the API." }; { defaults with - name = "xfs_growfs"; + name = "xfs_growfs"; added = (1, 19, 28); style = RErr, [Pathname "path"], [OBool "datasec"; OBool "logsec"; OBool "rtsec"; OInt64 "datasize"; OInt64 "logsize"; OInt64 "rtsize"; OInt64 "rtextsize"; OInt "maxpct"]; proc_nr = Some 343; optional = Some "xfs"; @@ -10659,7 +10659,7 @@ fields are returned as C<-1> (for numeric fields) or empty string." }; { defaults with - name = "rsync"; + name = "rsync"; added = (1, 19, 29); style = RErr, [Pathname "src"; Pathname "dest"], [OBool "archive"; OBool "deletedest"]; proc_nr = Some 344; optional = Some "rsync"; @@ -10690,7 +10690,7 @@ Delete files at the destination that do not exist at the source. =back" }; { defaults with - name = "rsync_in"; + name = "rsync_in"; added = (1, 19, 29); style = RErr, [String "remote"; Pathname "dest"], [OBool "archive"; OBool "deletedest"]; proc_nr = Some 345; optional = Some "rsync"; @@ -10716,7 +10716,7 @@ so the target must be set up not to require one. The optional arguments are the same as those of C<guestfs_rsync>." }; { defaults with - name = "rsync_out"; + name = "rsync_out"; added = (1, 19, 29); style = RErr, [Pathname "src"; String "remote"], [OBool "archive"; OBool "deletedest"]; proc_nr = Some 346; optional = Some "rsync"; @@ -10749,7 +10749,7 @@ command (see L<guestfish(1)/glob>), for example: { defaults with - name = "ls0"; + name = "ls0"; added = (1, 19, 32); style = RErr, [Pathname "dir"; FileOut "filenames"], []; proc_nr = Some 347; shortdesc = "get list of files in a directory"; @@ -10763,7 +10763,7 @@ In the output file, the filenames are separated by C<\\0> characters. C<.> and C<..> are not returned. The filenames are not sorted." }; { defaults with - name = "fill_dir"; + name = "fill_dir"; added = (1, 19, 32); style = RErr, [Pathname "dir"; Int "nr"], []; proc_nr = Some 348; shortdesc = "fill a directory with empty files"; @@ -10774,7 +10774,7 @@ through C<nr-1> (ie. each file name is 8 digits long padded with zeroes)." }; { defaults with - name = "xfs_admin"; + name = "xfs_admin"; added = (1, 19, 33); style = RErr, [Device "device"], [OBool "extunwritten"; OBool "imgfile"; OBool "v2log"; OBool "projid32bit"; OBool "lazycounter"; OString "label"; OString "uuid"]; proc_nr = Some 349; optional = Some "xfs"; @@ -10799,7 +10799,7 @@ and modified using the C<guestfs_xfs_info> and C<guestfs_xfs_growfs> calls." }; { defaults with - name = "hivex_open"; + name = "hivex_open"; added = (1, 19, 35); style = RErr, [Pathname "filename"], [OBool "verbose"; OBool "debug"; OBool "write"]; proc_nr = Some 350; optional = Some "hivex"; @@ -10821,7 +10821,7 @@ guestfs session, then it is closed. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_close"; + name = "hivex_close"; added = (1, 19, 35); style = RErr, [], []; proc_nr = Some 351; optional = Some "hivex"; @@ -10832,7 +10832,7 @@ Close the current hivex handle. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_root"; + name = "hivex_root"; added = (1, 19, 35); style = RInt64 "nodeh", [], []; proc_nr = Some 352; optional = Some "hivex"; @@ -10843,7 +10843,7 @@ Return the root node of the hive. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_name"; + name = "hivex_node_name"; added = (1, 19, 35); style = RString "name", [Int64 "nodeh"], []; proc_nr = Some 353; optional = Some "hivex"; @@ -10854,7 +10854,7 @@ Return the name of C<nodeh>. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_children"; + name = "hivex_node_children"; added = (1, 19, 35); style = RStructList ("nodehs", "hivex_node"), [Int64 "nodeh"], []; proc_nr = Some 354; optional = Some "hivex"; @@ -10865,7 +10865,7 @@ Return the list of nodes which are subkeys of C<nodeh>. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_get_child"; + name = "hivex_node_get_child"; added = (1, 19, 35); style = RInt64 "child", [Int64 "nodeh"; String "name"], []; proc_nr = Some 355; optional = Some "hivex"; @@ -10877,7 +10877,7 @@ This can return C<0> meaning the name was not found. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_parent"; + name = "hivex_node_parent"; added = (1, 19, 35); style = RInt64 "parent", [Int64 "nodeh"], []; proc_nr = Some 356; optional = Some "hivex"; @@ -10888,7 +10888,7 @@ Return the parent node of C<nodeh>. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_values"; + name = "hivex_node_values"; added = (1, 19, 35); style = RStructList ("valuehs", "hivex_value"), [Int64 "nodeh"], []; proc_nr = Some 357; optional = Some "hivex"; @@ -10899,7 +10899,7 @@ Return the array of (key, datatype, data) tuples attached to C<nodeh>. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_get_value"; + name = "hivex_node_get_value"; added = (1, 19, 35); style = RInt64 "valueh", [Int64 "nodeh"; String "key"], []; proc_nr = Some 358; optional = Some "hivex"; @@ -10912,7 +10912,7 @@ the key was not found. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_value_key"; + name = "hivex_value_key"; added = (1, 19, 35); style = RString "key", [Int64 "valueh"], []; proc_nr = Some 359; optional = Some "hivex"; @@ -10923,7 +10923,7 @@ Return the key (name) field of a (key, datatype, data) tuple. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_value_type"; + name = "hivex_value_type"; added = (1, 19, 35); style = RInt64 "datatype", [Int64 "valueh"], []; proc_nr = Some 360; optional = Some "hivex"; @@ -10934,7 +10934,7 @@ Return the data type field from a (key, datatype, data) tuple. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_value_value"; + name = "hivex_value_value"; added = (1, 19, 35); style = RBufferOut "databuf", [Int64 "valueh"], []; proc_nr = Some 361; optional = Some "hivex"; @@ -10947,7 +10947,7 @@ This is a wrapper around the L<hivex(3)> call of the same name. See also: C<guestfs_hivex_value_utf8>." }; { defaults with - name = "hivex_commit"; + name = "hivex_commit"; added = (1, 19, 35); style = RErr, [OptString "filename"], []; proc_nr = Some 362; optional = Some "hivex"; @@ -10974,7 +10974,7 @@ and the original hive is left untouched. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_add_child"; + name = "hivex_node_add_child"; added = (1, 19, 35); style = RInt64 "nodeh", [Int64 "parent"; String "name"], []; proc_nr = Some 363; optional = Some "hivex"; @@ -10985,7 +10985,7 @@ Add a child node to C<parent> named C<name>. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_delete_child"; + name = "hivex_node_delete_child"; added = (1, 19, 35); style = RErr, [Int64 "nodeh"], []; proc_nr = Some 364; optional = Some "hivex"; @@ -10996,7 +10996,7 @@ Delete C<nodeh>, recursively if necessary. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "hivex_node_set_value"; + name = "hivex_node_set_value"; added = (1, 19, 35); style = RErr, [Int64 "nodeh"; String "key"; Int64 "t"; BufferIn "val"], []; proc_nr = Some 365; optional = Some "hivex"; @@ -11008,7 +11008,7 @@ C<key> is the name, C<t> is the type, and C<val> is the data. This is a wrapper around the L<hivex(3)> call of the same name." }; { defaults with - name = "xfs_repair"; + name = "xfs_repair"; added = (1, 19, 36); style = RInt "status", [Dev_or_Path "device"], [OBool "forcelogzero"; OBool "nomodify"; OBool "noprefetch"; OBool "forcegeometry"; OInt64 "maxmem"; OInt64 "ihashsize"; OInt64 "bhashsize"; OInt64 "agstride"; OString "logdev"; OString "rtdev"]; proc_nr = Some 366; optional = Some "xfs"; @@ -11036,7 +11036,7 @@ The returned status indicates whether filesystem corruption was detected (returns C<1>) or was not detected (returns C<0>)." }; { defaults with - name = "rm_f"; + name = "rm_f"; added = (1, 19, 42); style = RErr, [Pathname "path"], []; proc_nr = Some 367; tests = [ @@ -11063,7 +11063,7 @@ Use C<guestfs_rmdir> to remove an empty directory, or C<guestfs_rm_rf> to remove directories recursively." }; { defaults with - name = "mke2fs"; + name = "mke2fs"; added = (1, 19, 44); style = RErr, [Device "device"], [OInt64 "blockscount"; OInt64 "blocksize"; OInt64 "fragsize"; OInt64 "blockspergroup"; OInt64 "numberofgroups"; OInt64 "bytesperinode"; OInt64 "inodesize"; OInt64 "journalsize"; OInt64 "numberofinodes"; OInt64 "stridesize"; OInt64 "stripewidth"; OInt64 "maxonlineresize"; OInt "reservedblockspercentage"; OInt "mmpupdateinterval"; OString "journaldevice"; OString "label"; OString "lastmounteddir"; OString "creatoros"; OString "fstype"; OString "usagetype"; OString "uuid"; OBool "forcecreate"; OBool "writesbandgrouponly"; OBool "lazyitableinit"; OBool "lazyjournalinit"; OBool "testfs"; OBool "discard"; OBool "quotatype"; OBool "extent"; OBool "filetype"; OBool "flexbg"; OBool "hasjournal"; OBool "journaldev"; OBool "largefile"; OBool "quota"; OBool "resizeinode"; OBool "sparsesuper"; OBool "uninitbg"]; proc_nr = Some 368; tests = @@ -11151,7 +11151,7 @@ filesystem is too small to contain a journal, C<mke2fs> will silently create an ext2 filesystem instead." }; { defaults with - name = "list_disk_labels"; + name = "list_disk_labels"; added = (1, 19, 49); style = RHashtable "labels", [], []; proc_nr = Some 369; shortdesc = "mapping of disk labels to devices"; @@ -11167,7 +11167,7 @@ are the full raw block device and partition names (eg. C</dev/sda> and C</dev/sda1>)." }; { defaults with - name = "internal_hot_add_drive"; + name = "internal_hot_add_drive"; added = (1, 19, 49); style = RErr, [String "label"], []; proc_nr = Some 370; visibility = VInternal; @@ -11176,7 +11176,7 @@ are the full raw block device and partition names This function is used internally when hotplugging drives." }; { defaults with - name = "internal_hot_remove_drive_precheck"; + name = "internal_hot_remove_drive_precheck"; added = (1, 19, 49); style = RErr, [String "label"], []; proc_nr = Some 371; visibility = VInternal; @@ -11185,7 +11185,7 @@ This function is used internally when hotplugging drives." }; This function is used internally when hotplugging drives." }; { defaults with - name = "internal_hot_remove_drive"; + name = "internal_hot_remove_drive"; added = (1, 19, 49); style = RErr, [String "label"], []; proc_nr = Some 372; visibility = VInternal; @@ -11194,7 +11194,7 @@ This function is used internally when hotplugging drives." }; This function is used internally when hotplugging drives." }; { defaults with - name = "mktemp"; + name = "mktemp"; added = (1, 19, 53); style = RString "path", [Pathname "tmpl"], [OString "suffix"]; proc_nr = Some 373; tests = [ @@ -11228,7 +11228,7 @@ If the optional C<suffix> parameter is given, then the suffix See also: C<guestfs_mkdtemp>." }; { defaults with - name = "mklost_and_found"; + name = "mklost_and_found"; added = (1, 19, 56); style = RErr, [Pathname "mountpoint"], []; proc_nr = Some 374; tests = [ @@ -11243,7 +11243,7 @@ of an ext2/3/4 filesystem. C<mountpoint> is the directory under which we try to create the C<lost+found> directory." }; { defaults with - name = "acl_get_file"; + name = "acl_get_file"; added = (1, 19, 63); style = RString "acl", [Pathname "path"; String "acltype"], []; proc_nr = Some 375; optional = Some "acl"; @@ -11269,7 +11269,7 @@ C<path> is a directory. =back" }; { defaults with - name = "acl_set_file"; + name = "acl_set_file"; added = (1, 19, 63); style = RErr, [Pathname "path"; String "acltype"; String "acl"], []; proc_nr = Some 376; optional = Some "acl"; @@ -11336,7 +11336,7 @@ groupnames to the correct numeric ID in the context of the guest, use the Augeas functions (see C<guestfs_aug_init>)." }; { defaults with - name = "acl_delete_def_file"; + name = "acl_delete_def_file"; added = (1, 19, 63); style = RErr, [Pathname "dir"], []; proc_nr = Some 377; optional = Some "acl"; @@ -11358,7 +11358,7 @@ This function deletes the default POSIX Access Control List (ACL) attached to directory C<dir>." }; { defaults with - name = "cap_get_file"; + name = "cap_get_file"; added = (1, 19, 63); style = RString "cap", [Pathname "path"], []; proc_nr = Some 378; optional = Some "linuxcaps"; @@ -11370,7 +11370,7 @@ The capabilities set is returned in text form (see L<cap_to_text(3)>). If no capabilities are attached to a file, an empty string is returned." }; { defaults with - name = "cap_set_file"; + name = "cap_set_file"; added = (1, 19, 63); style = RErr, [Pathname "path"; String "cap"], []; proc_nr = Some 379; optional = Some "linuxcaps"; @@ -11387,7 +11387,7 @@ The capabilities set C<cap> should be passed in text form (see L<cap_from_text(3)>)." }; { defaults with - name = "list_ldm_volumes"; + name = "list_ldm_volumes"; added = (1, 20, 0); style = RStringList "devices", [], []; proc_nr = Some 380; optional = Some "ldm"; @@ -11398,7 +11398,7 @@ that were found at launch time. It returns a list of device names." }; { defaults with - name = "list_ldm_partitions"; + name = "list_ldm_partitions"; added = (1, 20, 0); style = RStringList "devices", [], []; proc_nr = Some 381; optional = Some "ldm"; @@ -11409,7 +11409,7 @@ that were found at launch time. It returns a list of device names." }; { defaults with - name = "ldmtool_create_all"; + name = "ldmtool_create_all"; added = (1, 20, 0); style = RErr, [], []; proc_nr = Some 382; optional = Some "ldm"; @@ -11428,7 +11428,7 @@ However you might want to call this function if you have hotplugged disks or have just created a Windows dynamic disk." }; { defaults with - name = "ldmtool_remove_all"; + name = "ldmtool_remove_all"; added = (1, 20, 0); style = RErr, [], []; proc_nr = Some 383; optional = Some "ldm"; @@ -11439,7 +11439,7 @@ It removes the device mapper mappings for all Windows dynamic disk volumes" }; { defaults with - name = "ldmtool_scan"; + name = "ldmtool_scan"; added = (1, 20, 0); style = RStringList "guids", [], []; proc_nr = Some 384; optional = Some "ldm"; @@ -11453,7 +11453,7 @@ This function scans all block devices. To scan a subset of block devices, call C<guestfs_ldmtool_scan_devices> instead." }; { defaults with - name = "ldmtool_scan_devices"; + name = "ldmtool_scan_devices"; added = (1, 20, 0); style = RStringList "guids", [DeviceList "devices"], []; proc_nr = Some 385; optional = Some "ldm"; @@ -11467,7 +11467,7 @@ The parameter C<devices> is a list of block devices which are scanned. If this list is empty, all block devices are scanned." }; { defaults with - name = "ldmtool_diskgroup_name"; + name = "ldmtool_diskgroup_name"; added = (1, 20, 0); style = RString "name", [String "diskgroup"], []; proc_nr = Some 386; optional = Some "ldm"; @@ -11478,7 +11478,7 @@ parameter should be the GUID of a disk group, one element from the list returned by C<guestfs_ldmtool_scan>." }; { defaults with - name = "ldmtool_diskgroup_volumes"; + name = "ldmtool_diskgroup_volumes"; added = (1, 20, 0); style = RStringList "volumes", [String "diskgroup"], []; proc_nr = Some 387; optional = Some "ldm"; @@ -11489,7 +11489,7 @@ parameter should be the GUID of a disk group, one element from the list returned by C<guestfs_ldmtool_scan>." }; { defaults with - name = "ldmtool_diskgroup_disks"; + name = "ldmtool_diskgroup_disks"; added = (1, 20, 0); style = RStringList "disks", [String "diskgroup"], []; proc_nr = Some 388; optional = Some "ldm"; @@ -11500,7 +11500,7 @@ parameter should be the GUID of a disk group, one element from the list returned by C<guestfs_ldmtool_scan>." }; { defaults with - name = "ldmtool_volume_type"; + name = "ldmtool_volume_type"; added = (1, 20, 0); style = RString "voltype", [String "diskgroup"; String "volume"], []; proc_nr = Some 389; optional = Some "ldm"; @@ -11514,7 +11514,7 @@ C<simple>, C<spanned>, C<striped>, C<mirrored>, C<raid5>. Other types may also be returned." }; { defaults with - name = "ldmtool_volume_hint"; + name = "ldmtool_volume_hint"; added = (1, 20, 0); style = RString "hint", [String "diskgroup"; String "volume"], []; proc_nr = Some 390; optional = Some "ldm"; @@ -11526,7 +11526,7 @@ case the empty string is returned. The hint field is often, though not always, the name of a Windows drive, eg. C<E:>." }; { defaults with - name = "ldmtool_volume_partitions"; + name = "ldmtool_volume_partitions"; added = (1, 20, 0); style = RStringList "partitions", [String "diskgroup"; String "volume"], []; proc_nr = Some 391; optional = Some "ldm"; @@ -11536,7 +11536,7 @@ Return the list of partitions in the volume named C<volume> in the disk group with GUID C<diskgroup>." }; { defaults with - name = "part_set_gpt_type"; + name = "part_set_gpt_type"; added = (1, 21, 1); style = RErr, [Device "device"; Int "partnum"; GUID "guid"], []; proc_nr = Some 392; optional = Some "gdisk"; @@ -11559,7 +11559,7 @@ See L<http://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUI... for a useful list of type GUIDs." }; { defaults with - name = "part_get_gpt_type"; + name = "part_get_gpt_type"; added = (1, 21, 1); style = RString "guid", [Device "device"; Int "partnum"], []; proc_nr = Some 393; optional = Some "gdisk"; @@ -11577,7 +11577,7 @@ return an appropriate GUID corresponding to the MBR type. Behaviour is undefined for other partition types." }; { defaults with - name = "rename"; + name = "rename"; added = (1, 21, 5); style = RErr, [Pathname "oldpath"; Pathname "newpath"], []; proc_nr = Some 394; tests = [ @@ -11594,7 +11594,7 @@ the same as the Linux L<rename(2)> system call. In most cases you are better to use C<guestfs_mv> instead." }; { defaults with - name = "is_whole_device"; + name = "is_whole_device"; added = (1, 21, 9); style = RBool "flag", [Device "device"], []; proc_nr = Some 395; tests = [ @@ -11611,7 +11611,7 @@ This returns C<true> if and only if C<device> refers to a whole block device. That is, not a partition or a logical device." }; { defaults with - name = "internal_parse_mountable"; + name = "internal_parse_mountable"; added = (1, 21, 11); style = RStruct ("mountable", "internal_mountable"), [Mountable "mountable"], []; visibility = VInternal; proc_nr = Some 396; @@ -11620,7 +11620,7 @@ device. That is, not a partition or a logical device." }; Parse a mountable string." }; { defaults with - name = "internal_rhbz914931"; + name = "internal_rhbz914931"; added = (1, 21, 14); style = RErr, [FileIn "filename"; Int "count"], []; proc_nr = Some 397; visibility = VInternal; @@ -11631,7 +11631,7 @@ This is only used to debug RHBZ#914931. Note that this deliberately crashes guestfsd." }; { defaults with - name = "feature_available"; + name = "feature_available"; added = (1, 21, 26); style = RBool "isavailable", [StringList "groups"], []; proc_nr = Some 398; tests = [ @@ -11645,7 +11645,7 @@ of throwing an exception if a feature is not found. For other documentation see C<guestfs_available>." }; { defaults with - name = "syslinux"; + name = "syslinux"; added = (1, 21, 27); style = RErr, [Device "device"], [OString "directory"]; proc_nr = Some 399; optional = Some "syslinux"; @@ -11682,7 +11682,7 @@ about the contents of this file, see L<syslinux(1)>. See also C<guestfs_extlinux>." }; { defaults with - name = "extlinux"; + name = "extlinux"; added = (1, 21, 27); style = RErr, [Pathname "directory"], []; proc_nr = Some 400; optional = Some "extlinux"; @@ -11710,7 +11710,7 @@ about the contents of this file, see L<extlinux(1)>. See also C<guestfs_syslinux>." }; { defaults with - name = "cp_r"; + name = "cp_r"; added = (1, 21, 38); style = RErr, [Pathname "src"; Pathname "dest"], []; proc_nr = Some 401; tests = [ @@ -11732,7 +11732,7 @@ the target filesystem does not support it (primarily when writing to DOS FAT filesystems)." }; { defaults with - name = "remount"; + name = "remount"; added = (1, 23, 2); style = RErr, [Pathname "mountpoint"], [OBool "rw"]; proc_nr = Some 402; tests = [ @@ -11754,7 +11754,7 @@ Note that at the moment you must supply the \"optional\" C<rw> parameter. In future we may allow other flags to be adjusted." }; { defaults with - name = "set_uuid"; + name = "set_uuid"; added = (1, 23, 10); style = RErr, [Device "device"; String "uuid"], []; proc_nr = Some 403; tests = @@ -11772,7 +11772,7 @@ Only some filesystem types support setting UUIDs. To read the UUID on a filesystem, call C<guestfs_vfs_uuid>." }; { defaults with - name = "journal_open"; + name = "journal_open"; added = (1, 23, 11); style = RErr, [Pathname "directory"], []; proc_nr = Some 404; optional = Some "journal"; @@ -11789,7 +11789,7 @@ After you have finished using the journal, you should close the handle by calling C<guestfs_journal_close>." }; { defaults with - name = "journal_close"; + name = "journal_close"; added = (1, 23, 11); style = RErr, [], []; proc_nr = Some 405; optional = Some "journal"; @@ -11799,7 +11799,7 @@ handle by calling C<guestfs_journal_close>." }; Close the journal handle." }; { defaults with - name = "journal_next"; + name = "journal_next"; added = (1, 23, 11); style = RBool "more", [], []; proc_nr = Some 406; optional = Some "journal"; @@ -11816,7 +11816,7 @@ records to read. C<true> means you can read the next record have reached the end of the journal." }; { defaults with - name = "journal_skip"; + name = "journal_skip"; added = (1, 23, 11); style = RInt64 "rskip", [Int64 "skip"], []; proc_nr = Some 407; optional = Some "journal"; @@ -11832,7 +11832,7 @@ If this is not the same as the absolute value of the skip parameter the start of the journal." }; { defaults with - name = "internal_journal_get"; + name = "internal_journal_get"; added = (1, 23, 11); style = RErr, [FileOut "filename"], []; proc_nr = Some 408; visibility = VInternal; @@ -11843,7 +11843,7 @@ the start of the journal." }; This function is used internally when reading the journal." }; { defaults with - name = "journal_get_data_threshold"; + name = "journal_get_data_threshold"; added = (1, 23, 11); style = RInt64 "threshold", [], []; proc_nr = Some 409; optional = Some "journal"; @@ -11858,7 +11858,7 @@ If this returns C<0>, then the threshold is unlimited. See also C<guestfs_journal_set_data_threshold>." }; { defaults with - name = "journal_set_data_threshold"; + name = "journal_set_data_threshold"; added = (1, 23, 11); style = RErr, [Int64 "threshold"], []; proc_nr = Some 410; optional = Some "journal"; @@ -11873,7 +11873,7 @@ If you set this to C<0>, then the threshold is unlimited. See also C<guestfs_journal_get_data_threshold>." }; { defaults with - name = "aug_setm"; + name = "aug_setm"; added = (1, 23, 14); style = RInt "nodes", [String "base"; OptString "sub"; String "val"], []; proc_nr = Some 411; tests = [ @@ -11896,7 +11896,7 @@ in which case the C<base> nodes are modified. This returns the number of nodes modified." }; { defaults with - name = "aug_label"; + name = "aug_label"; added = (1, 23, 14); style = RString "label", [String "augpath"], []; proc_nr = Some 412; tests = [ @@ -11913,7 +11913,7 @@ C<augpath> is returned. C<augpath> must match exactly one node, else this function returns an error." }; { defaults with - name = "internal_upload"; + name = "internal_upload"; added = (1, 23, 30); style = RErr, [FileIn "filename"; String "tmpname"; Int "mode"], []; proc_nr = Some 413; visibility = VInternal; @@ -11923,7 +11923,7 @@ this function returns an error." }; This function is used internally when setting up the appliance." }; { defaults with - name = "internal_exit"; + name = "internal_exit"; added = (1, 23, 30); style = RErr, [], []; proc_nr = Some 414; visibility = VInternal; @@ -11934,7 +11934,7 @@ This function is used internally when closing the appliance. Note it's only called when ./configure --enable-valgrind-daemon is used." }; { defaults with - name = "copy_attributes"; + name = "copy_attributes"; added = (1, 25, 21); style = RErr, [Pathname "src"; Pathname "dest"], [OBool "all"; OBool "mode"; OBool "xattributes"; OBool "ownership"]; proc_nr = Some 415; shortdesc = "copy the attributes of a path (file/directory) to another"; @@ -11972,7 +11972,7 @@ enables all the other flags, if they are not specified already. =back" }; { defaults with - name = "part_get_name"; + name = "part_get_name"; added = (1, 25, 33); style = RString "name", [Device "device"; Int "partnum"], []; proc_nr = Some 416; shortdesc = "get partition name"; @@ -11984,7 +11984,7 @@ The partition name can only be read on certain types of partition table. This works on C<gpt> but not on C<mbr> partitions." }; { defaults with - name = "blkdiscard"; + name = "blkdiscard"; added = (1, 25, 44); style = RErr, [Device "device"], []; proc_nr = Some 417; optional = Some "blkdiscard"; @@ -12000,7 +12000,7 @@ set the C<discard> attribute on the underlying drive (see C<guestfs_add_drive_opts>)." }; { defaults with - name = "blkdiscardzeroes"; + name = "blkdiscardzeroes"; added = (1, 25, 44); style = RBool "zeroes", [Device "device"], []; proc_nr = Some 418; optional = Some "blkdiscardzeroes"; @@ -12014,7 +12014,7 @@ If it returns false, then it may be that discarded blocks are read as stale or random data." }; { defaults with - name = "cpio_out"; + name = "cpio_out"; added = (1, 27, 9); style = RErr, [String "directory"; FileOut "cpiofile"], [OString "format"]; proc_nr = Some 419; cancellable = true; @@ -12042,7 +12042,7 @@ New (SVR4) portable format with a checksum. =back" }; { defaults with - name = "journal_get_realtime_usec"; + name = "journal_get_realtime_usec"; added = (1, 27, 18); style = RInt64 "usec", [], []; proc_nr = Some 420; optional = Some "journal"; @@ -12052,7 +12052,7 @@ New (SVR4) portable format with a checksum. Get the realtime (wallclock) timestamp of the current journal entry." }; { defaults with - name = "statns"; + name = "statns"; added = (1, 27, 53); style = RStruct ("statbuf", "statns"), [Pathname "path"], []; proc_nr = Some 421; tests = [ @@ -12066,7 +12066,7 @@ Returns file information for the given C<path>. This is the same as the L<stat(2)> system call." }; { defaults with - name = "lstatns"; + name = "lstatns"; added = (1, 27, 53); style = RStruct ("statbuf", "statns"), [Pathname "path"], []; proc_nr = Some 422; tests = [ @@ -12084,7 +12084,7 @@ refers to. This is the same as the L<lstat(2)> system call." }; { defaults with - name = "internal_lstatnslist"; + name = "internal_lstatnslist"; added = (1, 27, 53); style = RStructList ("statbufs", "statns"), [Pathname "path"; StringList "names"], []; proc_nr = Some 423; visibility = VInternal; @@ -12093,7 +12093,7 @@ This is the same as the L<lstat(2)> system call." }; This is the internal call which implements C<guestfs_lstatnslist>." }; { defaults with - name = "blockdev_setra"; + name = "blockdev_setra"; added = (1, 29, 10); style = RErr, [Device "device"; Int "sectors"], []; proc_nr = Some 424; tests = [ @@ -12107,7 +12107,7 @@ Set readahead (in 512-byte sectors) for the device. This uses the L<blockdev(8)> command." }; { defaults with - name = "btrfs_subvolume_get_default"; + name = "btrfs_subvolume_get_default"; added = (1, 29, 17); style = RInt64 "id", [Mountable_or_Path "fs"], []; proc_nr = Some 425; optional = Some "btrfs"; camel_name = "BTRFSSubvolumeGetDefault"; @@ -12125,7 +12125,7 @@ This uses the L<blockdev(8)> command." }; Get the default subvolume or snapshot of a filesystem mounted at C<mountpoint>." }; { defaults with - name = "btrfs_subvolume_show"; + name = "btrfs_subvolume_show"; added = (1, 29, 17); style = RHashtable "btrfssubvolumeinfo", [Pathname "subvolume"], []; proc_nr = Some 426; optional = Some "btrfs"; camel_name = "BTRFSSubvolumeShow"; @@ -12150,7 +12150,7 @@ Get the default subvolume or snapshot of a filesystem mounted at C<mountpoint>." Return detailed information of the subvolume." }; { defaults with - name = "btrfs_quota_enable"; + name = "btrfs_quota_enable"; added = (1, 29, 17); style = RErr, [Mountable_or_Path "fs"; Bool "enable"], []; proc_nr = Some 427; optional = Some "btrfs"; camel_name = "BTRFSQuotaEnable"; @@ -12175,7 +12175,7 @@ Return detailed information of the subvolume." }; Enable or disable subvolume quota support for filesystem which contains C<path>." }; { defaults with - name = "btrfs_quota_rescan"; + name = "btrfs_quota_rescan"; added = (1, 29, 17); style = RErr, [Mountable_or_Path "fs"], []; proc_nr = Some 428; optional = Some "btrfs"; camel_name = "BTRFSQuotaRescan"; @@ -12196,7 +12196,7 @@ Enable or disable subvolume quota support for filesystem which contains C<path>. Trash all qgroup numbers and scan the metadata again with the current config." }; { defaults with - name = "btrfs_qgroup_limit"; + name = "btrfs_qgroup_limit"; added = (1, 29, 17); style = RErr, [Pathname "subvolume"; Int64 "size"], []; proc_nr = Some 429; optional = Some "btrfs"; camel_name = "BTRFSQgroupLimit"; @@ -12218,7 +12218,7 @@ Limit the size of a subvolume which's path is C<subvolume>. C<size> can have suffix of G, M, or K. " }; { defaults with - name = "btrfs_qgroup_create"; + name = "btrfs_qgroup_create"; added = (1, 29, 17); style = RErr, [String "qgroupid"; Pathname "subvolume"], []; proc_nr = Some 430; optional = Some "btrfs"; camel_name = "BTRFSQgroupCreate"; @@ -12235,7 +12235,7 @@ can have suffix of G, M, or K. " }; Create a quota group (qgroup) for subvolume at C<subvolume>." }; { defaults with - name = "btrfs_qgroup_destroy"; + name = "btrfs_qgroup_destroy"; added = (1, 29, 17); style = RErr, [String "qgroupid"; Pathname "subvolume"], []; proc_nr = Some 431; optional = Some "btrfs"; camel_name = "BTRFSQgroupDestroy"; @@ -12253,7 +12253,7 @@ Create a quota group (qgroup) for subvolume at C<subvolume>." }; Destroy a quota group." }; { defaults with - name = "btrfs_qgroup_show"; + name = "btrfs_qgroup_show"; added = (1, 29, 17); style = RStructList ("qgroups", "btrfsqgroup"), [Pathname "path"], []; proc_nr = Some 432; tests = [ @@ -12272,7 +12272,7 @@ Show all subvolume quota groups in a btrfs filesystem, including their usages." }; { defaults with - name = "btrfs_qgroup_assign"; + name = "btrfs_qgroup_assign"; added = (1, 29, 17); style = RErr, [String "src"; String "dst"; Pathname "path"], []; proc_nr = Some 433; optional = Some "btrfs"; camel_name = "BTRFSQgroupAssign"; @@ -12291,7 +12291,7 @@ Add qgroup C<src> to parent qgroup C<dst>. This command can group several qgroups into a parent qgroup to share common limit." }; { defaults with - name = "btrfs_qgroup_remove"; + name = "btrfs_qgroup_remove"; added = (1, 29, 17); style = RErr, [String "src"; String "dst"; Pathname "path"], []; proc_nr = Some 434; optional = Some "btrfs"; camel_name = "BTRFSQgroupRemove"; @@ -12310,7 +12310,7 @@ several qgroups into a parent qgroup to share common limit." }; Remove qgroup C<src> from the parent qgroup C<dst>." }; { defaults with - name = "btrfs_scrub_start"; + name = "btrfs_scrub_start"; added = (1, 29, 22); style = RErr, [Pathname "path"], []; proc_nr = Some 435; optional = Some "btrfs"; camel_name = "BTRFSScrubStart"; @@ -12327,7 +12327,7 @@ and the duplicate copies from RAID storage to identify and repair any corrupt data." }; { defaults with - name = "btrfs_scrub_cancel"; + name = "btrfs_scrub_cancel"; added = (1, 29, 22); style = RErr, [Pathname "path"], []; proc_nr = Some 436; optional = Some "btrfs"; camel_name = "BTRFSScrubCancel"; @@ -12337,7 +12337,7 @@ corrupt data." }; Cancel a running scrub on a btrfs filesystem." }; { defaults with - name = "btrfs_scrub_resume"; + name = "btrfs_scrub_resume"; added = (1, 29, 22); style = RErr, [Pathname "path"], []; proc_nr = Some 437; optional = Some "btrfs"; camel_name = "BTRFSScrubResume"; @@ -12347,7 +12347,7 @@ Cancel a running scrub on a btrfs filesystem." }; Resume a previously canceled or interrupted scrub on a btrfs filesystem." }; { defaults with - name = "btrfs_balance_pause"; + name = "btrfs_balance_pause"; added = (1, 29, 22); style = RErr, [Pathname "path"], []; proc_nr = Some 438; optional = Some "btrfs"; camel_name = "BTRFSBalancePause"; @@ -12357,7 +12357,7 @@ Resume a previously canceled or interrupted scrub on a btrfs filesystem." }; Pause a running balance on a btrfs filesystem." }; { defaults with - name = "btrfs_balance_cancel"; + name = "btrfs_balance_cancel"; added = (1, 29, 22); style = RErr, [Pathname "path"], []; proc_nr = Some 439; optional = Some "btrfs"; camel_name = "BTRFSBalanceCancel"; @@ -12367,7 +12367,7 @@ Pause a running balance on a btrfs filesystem." }; Cancel a running balance on a btrfs filesystem." }; { defaults with - name = "btrfs_balance_resume"; + name = "btrfs_balance_resume"; added = (1, 29, 22); style = RErr, [Pathname "path"], []; proc_nr = Some 440; optional = Some "btrfs"; camel_name = "BTRFSBalanceResume"; @@ -12377,7 +12377,7 @@ Cancel a running balance on a btrfs filesystem." }; Resume a paused balance on a btrfs filesystem." }; { defaults with - name = "btrfs_filesystem_defragment"; + name = "btrfs_filesystem_defragment"; added = (1, 29, 22); style = RErr, [Pathname "path"], [OBool "flush"; OString "compress"]; proc_nr = Some 443; optional = Some "btrfs"; camel_name = "BTRFSFilesystemDefragment"; @@ -12397,7 +12397,7 @@ Resume a paused balance on a btrfs filesystem." }; Defragment a file or directory on a btrfs filesystem. compress is one of zlib or lzo." }; { defaults with - name = "btrfs_rescue_chunk_recover"; + name = "btrfs_rescue_chunk_recover"; added = (1, 29, 22); style = RErr, [Device "device"], []; proc_nr = Some 444; optional = Some "btrfs"; camel_name = "BTRFSRescueChunkRecover"; @@ -12411,7 +12411,7 @@ Defragment a file or directory on a btrfs filesystem. compress is one of zlib or Recover the chunk tree of btrfs filesystem by scanning the devices one by one." }; { defaults with - name = "btrfs_rescue_super_recover"; + name = "btrfs_rescue_super_recover"; added = (1, 29, 22); style = RErr, [Device "device"], []; proc_nr = Some 445; optional = Some "btrfs"; camel_name = "BTRFSRescueSuperRecover"; @@ -12425,7 +12425,7 @@ Recover the chunk tree of btrfs filesystem by scanning the devices one by one." Recover bad superblocks from good copies." }; { defaults with - name = "part_set_gpt_guid"; + name = "part_set_gpt_guid"; added = (1, 29, 25); style = RErr, [Device "device"; Int "partnum"; GUID "guid"], []; proc_nr = Some 446; optional = Some "gdisk"; @@ -12445,7 +12445,7 @@ error if the partition table of C<device> isn't GPT, or if C<guid> is not a valid GUID." }; { defaults with - name = "part_get_gpt_guid"; + name = "part_get_gpt_guid"; added = (1, 29, 25); style = RString "guid", [Device "device"; Int "partnum"], []; proc_nr = Some 447; optional = Some "gdisk"; @@ -12461,7 +12461,7 @@ valid GUID." }; Return the GUID of numbered GPT partition C<partnum>." }; { defaults with - name = "btrfs_balance_status"; + name = "btrfs_balance_status"; added = (1, 29, 26); style = RStruct ("status", "btrfsbalance"), [Pathname "path"], []; proc_nr = Some 448; optional = Some "btrfs"; camel_name = "BTRFSBalanceStatus"; @@ -12471,7 +12471,7 @@ Return the GUID of numbered GPT partition C<partnum>." }; Show the status of a running or paused balance on a btrfs filesystem." }; { defaults with - name = "btrfs_scrub_status"; + name = "btrfs_scrub_status"; added = (1, 29, 26); style = RStruct ("status", "btrfsscrub"), [Pathname "path"], []; proc_nr = Some 449; optional = Some "btrfs"; camel_name = "BTRFSScrubStatus"; @@ -12487,7 +12487,7 @@ Show the status of a running or paused balance on a btrfs filesystem." }; Show status of running or finished scrub on a btrfs filesystem." }; { defaults with - name = "btrfstune_seeding"; + name = "btrfstune_seeding"; added = (1, 29, 29); style = RErr, [Device "device"; Bool "seeding"], []; proc_nr = Some 450; optional = Some "btrfs"; camel_name = "BTRFSTuneSeeding"; @@ -12504,7 +12504,7 @@ Enable seeding of a btrfs device, this will force a fs readonly so that you can use it to build other filesystems." }; { defaults with - name = "btrfstune_enable_extended_inode_refs"; + name = "btrfstune_enable_extended_inode_refs"; added = (1, 29, 29); style = RErr, [Device "device"], []; proc_nr = Some 451; optional = Some "btrfs"; camel_name = "BTRFSTuneEnableExtendedInodeRefs"; @@ -12519,7 +12519,7 @@ so that you can use it to build other filesystems." }; This will Enable extended inode refs." }; { defaults with - name = "btrfstune_enable_skinny_metadata_extent_refs"; + name = "btrfstune_enable_skinny_metadata_extent_refs"; added = (1, 29, 29); style = RErr, [Device "device"], []; proc_nr = Some 452; optional = Some "btrfs"; camel_name = "BTRFSTuneEnableSkinnyMetadataExtentRefs"; @@ -12534,7 +12534,7 @@ This will Enable extended inode refs." }; This enable skinny metadata extent refs." }; { defaults with - name = "btrfs_image"; + name = "btrfs_image"; added = (1, 29, 32); style = RErr, [DeviceList "source"; Pathname "image"], [OInt "compresslevel"]; proc_nr = Some 453; optional = Some "btrfs"; camel_name = "BTRFSImage"; @@ -12556,7 +12556,7 @@ This is used to create an image of a btrfs filesystem. All data will be zeroed, but metadata and the like is preserved." }; { defaults with - name = "part_get_mbr_part_type"; + name = "part_get_mbr_part_type"; added = (1, 29, 32); style = RString "partitiontype", [Device "device"; Int "partnum"], []; proc_nr = Some 454; tests = [ -- 2.3.1