[PATCH] appliance: touch /etc/fstab when enabling the network (RHBZ#1224795)
by Pino Toscano
Sadly, the dhclient-script shipped as part of isc-dhcp-client in Ubuntu
unconditionally reads from /etc/fstab without checking for its
existence. Since no package holds /etc/fstab, this file will not exist
in the appliance, cause dhclient to fail (actually keep looping calling
the failing dhclient-script) when the network is requested.
As a workaround, touch /etc/fstab just before enabling the network: if
that file exists nothing changes, while an empty file will be available
in the other case, making at least dhclient-script in Ubuntu working.
---
appliance/init | 1 +
1 file changed, 1 insertion(+)
diff --git a/appliance/init b/appliance/init
index 3fdf4d0..3816dfd 100755
--- a/appliance/init
+++ b/appliance/init
@@ -118,6 +118,7 @@ ip link set dev lo up
if test "$guestfs_network" = 1; then
iface=$(ls -I all -I default -I lo /proc/sys/net/ipv4/conf)
+ touch /etc/fstab # Workaround for Ubuntu.
if dhclient --version >/dev/null 2>&1; then
dhclient $iface
else
--
2.7.4
8 years
- 2
- 1
[PATCH v2 0/7] Fix SELinux
by Richard W.M. Jones
v1 -> v2:
- Add simple test of the setfiles API.
- Use SELinux_relabel module in virt-v2v (instead of touch /.autorelabel).
- Small fixes.
Rich.
8 years
- 2
- 10
Re: [Libguestfs] Help: Can I access network inside libguestfs?
by Richard W.M. Jones
[Let's keep the replies on the mailing list please]
On Wed, Jul 13, 2016 at 11:04:13AM +0800, Baochuan Wu wrote:
> Thanks Richard.
> I tried guestfs_set_network, and I think I can successfully use yum -y to
> install software. It is a little slow.
Most of the time is taken running yum and downloading packages ...
> My program operates CentOS 6.4 VM virtual disks on CentOS 7, I installed
> libguestfs into the CentOS 6.4. After installing, I reboot CentOS 6.4 but I
> cannot log into it anymore.
You will need to relabel the filesystem after installing packages, see:
https://github.com/libguestfs/libguestfs/blob/master/customize/customize_...
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html
8 years
- 2
- 2
[PATCH 0/5] Fix SELinux
by Richard W.M. Jones
We can use the setfiles(8) command to relabel the guest filesystem,
even though we don't have a policy loaded nor SELinux enabled in the
appliance kernel.
This also deprecates or removes the old and broken SELinux support.
This patch isn't quite complete - I would like to add some tests to
the new API. I'm posting here to garner early feedback.
Rich.
8 years
- 1
- 6
[PATCH v3 1/2] OCaml tools: add and use a Getopt module
by Pino Toscano
Add a new Getopt module to mllib, to parse command line arguments with
handlers close to the ones used with Arg, but using getopt(3) (actually
getopt_long_only) to do the real parsing. This allow us to provide
options for OCaml tools with a syntax similar to the C tools, and use
the additional features getopt offers and Arg does not.
Getopt now handles every part of the command line handling, including
the output of short & long options.
Do a single-step conversion of Common_utils and all the OCaml tools to
the syntax of Getopt.
Move a couple of utility functions from Common_utils to Getopt, since
they fit better there (and Common_utils cannot be used in Getopt, as
the former already uses the latter).
As side-change due to the conversion, extra arguments for sysprep
operation can have more keys for the same argument.
---
builder/Makefile.am | 2 +
builder/cmdline.ml | 93 ++++-----
customize/Makefile.am | 2 +
customize/customize_main.ml | 35 ++--
dib/Makefile.am | 3 +
dib/cmdline.ml | 83 ++++----
generator/customize.ml | 104 +++++-----
get-kernel/Makefile.am | 2 +
get-kernel/get_kernel.ml | 28 ++-
mllib/Makefile.am | 10 +-
mllib/common_utils.ml | 65 +-----
mllib/common_utils.mli | 10 +-
mllib/getopt-c.c | 316 ++++++++++++++++++++++++++++++
mllib/getopt.ml | 203 +++++++++++++++++++
mllib/getopt.mli | 87 ++++++++
resize/Makefile.am | 2 +
resize/resize.ml | 53 +++--
sparsify/Makefile.am | 9 +-
sparsify/cmdline.ml | 26 ++-
sysprep/Makefile.am | 2 +
sysprep/main.ml | 41 ++--
sysprep/sysprep_operation.ml | 29 +--
sysprep/sysprep_operation.mli | 6 +-
sysprep/sysprep_operation_script.ml | 4 +-
sysprep/sysprep_operation_user_account.ml | 4 +-
v2v/Makefile.am | 5 +
v2v/cmdline.ml | 92 ++++-----
v2v/copy_to_local.ml | 12 +-
28 files changed, 941 insertions(+), 387 deletions(-)
create mode 100644 mllib/getopt-c.c
create mode 100644 mllib/getopt.ml
create mode 100644 mllib/getopt.mli
diff --git a/builder/Makefile.am b/builder/Makefile.am
index 5c41cfa..a4691d7 100644
--- a/builder/Makefile.am
+++ b/builder/Makefile.am
@@ -91,6 +91,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
../mllib/fsync-c.c \
+ ../mllib/getopt-c.c \
../mllib/uri-c.c \
../mllib/mkdtemp-c.c \
../customize/perl_edit-c.c \
@@ -137,6 +138,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/fsync.cmo \
$(top_builddir)/mllib/planner.cmo \
diff --git a/builder/cmdline.ml b/builder/cmdline.ml
index 6085b45..846c2e3 100644
--- a/builder/cmdline.ml
+++ b/builder/cmdline.ml
@@ -119,60 +119,52 @@ let parse_cmdline () =
let warn_if_partition = ref true in
let argspec = [
- "--arch", Arg.Set_string arch, "arch" ^ " " ^ s_"Set the output architecture";
- "--attach", Arg.String attach_disk, "iso" ^ " " ^ s_"Attach data disk/ISO during install";
- "--attach-format", Arg.String set_attach_format,
- "format" ^ " " ^ s_"Set attach disk format";
- "--cache", Arg.String set_cache, "dir" ^ " " ^ s_"Set template cache dir";
- "--no-cache", Arg.Unit no_cache, " " ^ s_"Disable template cache";
- "--cache-all-templates", Arg.Unit cache_all_mode,
- " " ^ s_"Download all templates to the cache";
- "--check-signature", Arg.Set check_signature,
- " " ^ s_"Check digital signatures";
- "--check-signatures", Arg.Set check_signature,
- " " ^ s_"Check digital signatures";
- "--no-check-signature", Arg.Clear check_signature,
- " " ^ s_"Disable digital signatures";
- "--no-check-signatures", Arg.Clear check_signature,
- " " ^ s_"Disable digital signatures";
- "--curl", Arg.Set_string curl, "curl" ^ " " ^ s_"Set curl binary/command";
- "--delete-cache", Arg.Unit delete_cache_mode,
- " " ^ s_"Delete the template cache";
- "--no-delete-on-failure", Arg.Clear delete_on_failure,
- " " ^ s_"Don't delete output file on failure";
- "--fingerprint", Arg.String add_fingerprint,
- "AAAA.." ^ " " ^ s_"Fingerprint of valid signing key";
- "--format", Arg.Set_string format, "raw|qcow2" ^ " " ^ s_"Output format (default: raw)";
- "--get-kernel", Arg.Unit get_kernel_mode,
- "image" ^ " " ^ s_"Get kernel from image";
- "--gpg", Arg.Set_string gpg, "gpg" ^ " " ^ s_"Set GPG binary/command";
- "-l", Arg.Unit list_mode, " " ^ s_"List available templates";
- "--list", Arg.Unit list_mode, " " ^ s_"List available templates";
- "--long", Arg.Unit list_set_long, " " ^ s_"Shortcut for --list-format long";
- "--list-format", Arg.String list_set_format,
- "short|long|json" ^ " " ^ s_"Set the format for --list (default: short)";
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-m", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--memsize", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--network", Arg.Set network, " " ^ s_"Enable appliance network (default)";
- "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network";
- "--notes", Arg.Unit notes_mode, " " ^ s_"Display installation notes";
- "-o", Arg.Set_string output, "file" ^ " " ^ s_"Set output filename";
- "--output", Arg.Set_string output, "file" ^ " " ^ s_"Set output filename";
- "--print-cache", Arg.Unit print_cache_mode,
- " " ^ s_"Print info about template cache";
- "--size", Arg.String set_size, "size" ^ " " ^ s_"Set output disk size";
- "--smp", Arg.Int set_smp, "vcpus" ^ " " ^ s_"Set number of vCPUs";
- "--source", Arg.String add_source, "URL" ^ " " ^ s_"Set source URL";
- "--no-sync", Arg.Clear sync, " " ^ s_"Do not fsync output file on exit";
- "--no-warn-if-partition", Arg.Clear warn_if_partition,
- " " ^ s_"Do not warn if writing to a partition";
+ [ "--arch" ], Getopt.Set_string ("arch", arch), s_"Set the output architecture";
+ [ "--attach" ], Getopt.String ("iso", attach_disk), s_"Attach data disk/ISO during install";
+ [ "--attach-format" ], Getopt.String ("format", set_attach_format),
+ s_"Set attach disk format";
+ [ "--cache" ], Getopt.String ("dir", set_cache), s_"Set template cache dir";
+ [ "--no-cache" ], Getopt.Unit no_cache, s_"Disable template cache";
+ [ "--cache-all-templates" ], Getopt.Unit cache_all_mode,
+ s_"Download all templates to the cache";
+ [ "--check-signature"; "--check-signatures" ], Getopt.Set check_signature,
+ s_"Check digital signatures";
+ [ "--no-check-signature"; "--no-check-signatures" ], Getopt.Clear check_signature,
+ s_"Disable digital signatures";
+ [ "--curl" ], Getopt.Set_string ("curl", curl), s_"Set curl binary/command";
+ [ "--delete-cache" ], Getopt.Unit delete_cache_mode,
+ s_"Delete the template cache";
+ [ "--no-delete-on-failure" ], Getopt.Clear delete_on_failure,
+ s_"Don't delete output file on failure";
+ [ "--fingerprint" ], Getopt.String ("AAAA..", add_fingerprint),
+ s_"Fingerprint of valid signing key";
+ [ "--format" ], Getopt.Set_string ("raw|qcow2", format), s_"Output format (default: raw)";
+ [ "--get-kernel" ], Getopt.Unit get_kernel_mode,
+ s_"Get kernel from image";
+ [ "--gpg" ], Getopt.Set_string ("gpg", gpg), s_"Set GPG binary/command";
+ [ "-l"; "--list" ], Getopt.Unit list_mode, s_"List available templates";
+ [ "--long" ], Getopt.Unit list_set_long, s_"Shortcut for --list-format long";
+ [ "--list-format" ], Getopt.String ("short|long|json", list_set_format),
+ s_"Set the format for --list (default: short)";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-m"; "--memsize" ], Getopt.Int ("mb", set_memsize), s_"Set memory size";
+ [ "--network" ], Getopt.Set network, s_"Enable appliance network (default)";
+ [ "--no-network" ], Getopt.Clear network, s_"Disable appliance network";
+ [ "--notes" ], Getopt.Unit notes_mode, s_"Display installation notes";
+ [ "-o"; "--output" ], Getopt.Set_string ("file", output), s_"Set output filename";
+ [ "--print-cache" ], Getopt.Unit print_cache_mode,
+ s_"Print info about template cache";
+ [ "--size" ], Getopt.String ("size", set_size), s_"Set output disk size";
+ [ "--smp" ], Getopt.Int ("vcpus", set_smp), s_"Set number of vCPUs";
+ [ "--source" ], Getopt.String ("URL", add_source), s_"Set source URL";
+ [ "--no-sync" ], Getopt.Clear sync, s_"Do not fsync output file on exit";
+ [ "--no-warn-if-partition" ], Getopt.Clear warn_if_partition,
+ s_"Do not warn if writing to a partition";
] in
let customize_argspec, get_customize_ops = Customize_cmdline.argspec () in
let customize_argspec =
List.map (fun (spec, _, _) -> spec) customize_argspec in
let argspec = argspec @ customize_argspec in
- let argspec = set_standard_options argspec in
let args = ref [] in
let anon_fun s = push_front s args in
@@ -192,7 +184,8 @@ A short summary of the options is given below. For detailed help please
read the man page virt-builder(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ let opthandle = create_standard_options argspec ~anon_fun usage_msg in
+ Getopt.parse opthandle;
(* Dereference options. *)
let args = List.rev !args in
diff --git a/customize/Makefile.am b/customize/Makefile.am
index de3d7e0..f18e238 100644
--- a/customize/Makefile.am
+++ b/customize/Makefile.am
@@ -70,6 +70,7 @@ SOURCES_C = \
../fish/file-edit.c \
../fish/file-edit.h \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/uri-c.c \
crypt-c.c \
perl_edit-c.c
@@ -96,6 +97,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/regedit.cmo \
$(top_builddir)/mllib/URI.cmo \
diff --git a/customize/customize_main.ml b/customize/customize_main.ml
index 3681b32..2d2c3e9 100644
--- a/customize/customize_main.ml
+++ b/customize/customize_main.ml
@@ -71,33 +71,25 @@ let main () =
in
let argspec = [
- "-a", Arg.String add_file, s_"file" ^ " " ^ s_"Add disk image file";
- "--add", Arg.String add_file, s_"file" ^ " " ^ s_"Add disk image file";
- "--attach", Arg.String attach_disk, "iso" ^ " " ^ s_"Attach data disk/ISO during install";
- "--attach-format", Arg.String set_attach_format,
- "format" ^ " " ^ s_"Set attach disk format";
- "-c", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "--connect", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "-d", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "--domain", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "-n", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dryrun", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dry-run", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--format", Arg.String set_format, s_"format" ^ " " ^ s_"Set format (default: auto)";
- "-m", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--memsize", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--network", Arg.Set network, " " ^ s_"Enable appliance network (default)";
- "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network";
- "--smp", Arg.Int set_smp, "vcpus" ^ " " ^ s_"Set number of vCPUs";
+ [ "-a"; "--add" ], Getopt.String (s_"file", add_file), s_"Add disk image file";
+ [ "--attach" ], Getopt.String ("iso", attach_disk), s_"Attach data disk/ISO during install";
+ [ "--attach-format" ], Getopt.String ("format", set_attach_format),
+ s_"Set attach disk format";
+ [ "-c"; "--connect" ], Getopt.Set_string (s_"uri", libvirturi), s_"Set libvirt URI";
+ [ "-d"; "--domain" ], Getopt.String (s_"domain", set_domain), s_"Set libvirt guest name";
+ [ "-n"; "--dryrun"; "--dry-run" ], Getopt.Set dryrun, s_"Perform a dry run";
+ [ "--format" ], Getopt.String (s_"format", set_format), s_"Set format (default: auto)";
+ [ "-m"; "--memsize" ], Getopt.Int ("mb", set_memsize), s_"Set memory size";
+ [ "--network" ], Getopt.Set network, s_"Enable appliance network (default)";
+ [ "--no-network" ], Getopt.Clear network, s_"Disable appliance network";
+ [ "--smp" ], Getopt.Int ("vcpus", set_smp), s_"Set number of vCPUs";
] in
let customize_argspec, get_customize_ops =
Customize_cmdline.argspec () in
let customize_argspec =
List.map (fun (spec, _, _) -> spec) customize_argspec in
let argspec = argspec @ customize_argspec in
- let argspec = set_standard_options argspec in
- let anon_fun _ = raise (Arg.Bad (s_"extra parameter on the command line")) in
let usage_msg =
sprintf (f_"\
%s: customize a virtual machine
@@ -110,7 +102,8 @@ A short summary of the options is given below. For detailed help please
read the man page virt-customize(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ let opthandle = create_standard_options argspec usage_msg in
+ Getopt.parse opthandle;
if not !format_consumed then
error (f_"--format parameter must appear before -a parameter");
diff --git a/dib/Makefile.am b/dib/Makefile.am
index ae6e878..8f60314 100644
--- a/dib/Makefile.am
+++ b/dib/Makefile.am
@@ -34,6 +34,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/mkdtemp-c.c
bin_PROGRAMS =
@@ -60,6 +61,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/mkdtemp.cmo \
$(SOURCES_ML:.ml=.cmo)
@@ -81,6 +83,7 @@ endif
OCAMLCLIBS = \
-pthread -lpthread \
-lutils \
+ $(LIBXML2_LIBS) \
$(LIBINTL) \
-lgnu
diff --git a/dib/cmdline.ml b/dib/cmdline.ml
index ec4ebba..0ec1616 100644
--- a/dib/cmdline.ml
+++ b/dib/cmdline.ml
@@ -151,51 +151,48 @@ read the man page virt-dib(1).
prepend (List.rev (String.nsplit "," arg)) extra_packages in
let argspec = [
- "-p", Arg.String append_element_path, "path" ^ " " ^ s_"Add new a elements location";
- "--element-path", Arg.String append_element_path, "path" ^ " " ^ s_"Add new a elements location";
- "--exclude-element", Arg.String append_excluded_element,
- "element" ^ " " ^ s_"Exclude the specified element";
- "--exclude-script", Arg.String append_excluded_script,
- "script" ^ " " ^ s_"Exclude the specified script";
- "--envvar", Arg.String append_envvar, "envvar[=value]" ^ " " ^ s_"Carry/set this environment variable";
- "--skip-base", Arg.Clear use_base, " " ^ s_"Skip the inclusion of the 'base' element";
- "--root-label", Arg.String set_root_label, "label" ^ " " ^ s_"Label for the root fs";
- "--install-type", Arg.Set_string install_type, "type" ^ " " ^ s_"Installation type";
- "--image-cache", Arg.String set_image_cache, "directory" ^ " " ^ s_"Location for cached images";
- "-u", Arg.Clear compressed, " " ^ "Do not compress the qcow2 image";
- "--qemu-img-options", Arg.String set_qemu_img_options,
- "option" ^ " " ^ s_"Add qemu-img options";
- "--mkfs-options", Arg.String set_mkfs_options,
- "option" ^ " " ^ s_"Add mkfs options";
- "--extra-packages", Arg.String append_extra_packages,
- "pkg,..." ^ " " ^ s_"Add extra packages to install";
-
- "--ramdisk", Arg.Set is_ramdisk, " " ^ "Switch to a ramdisk build";
- "--ramdisk-element", Arg.Set_string ramdisk_element, "name" ^ " " ^ s_"Main element for building ramdisks";
-
- "--name", Arg.Set_string image_name, "name" ^ " " ^ s_"Name of the image";
- "--fs-type", Arg.Set_string fs_type, "fs" ^ " " ^ s_"Filesystem for the image";
- "--size", Arg.String set_size, "size" ^ " " ^ s_"Set output disk size";
- "--formats", Arg.String set_format, "qcow2,tgz,..." ^ " " ^ s_"Output formats";
- "--arch", Arg.Set_string arch, "arch" ^ " " ^ s_"Output architecture";
- "--drive", Arg.String set_drive, "path" ^ " " ^ s_"Optional drive for caches";
-
- "-m", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--memsize", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--network", Arg.Set network, " " ^ s_"Enable appliance network (default)";
- "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network";
- "--smp", Arg.Int set_smp, "vcpus" ^ " " ^ s_"Set number of vCPUs";
- "--no-delete-on-failure", Arg.Clear delete_on_failure,
- " " ^ s_"Don't delete output file on failure";
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
-
- "--debug", Arg.Int set_debug, "level" ^ " " ^ s_"Set debug level";
- "-B", Arg.Set_string basepath, "path" ^ " " ^ s_"Base path of diskimage-builder library";
+ [ "-p"; "--element-path" ], Getopt.String ("path", append_element_path), s_"Add new a elements location";
+ [ "--exclude-element" ], Getopt.String ("element", append_excluded_element),
+ s_"Exclude the specified element";
+ [ "--exclude-script" ], Getopt.String ("script", append_excluded_script),
+ s_"Exclude the specified script";
+ [ "--envvar" ], Getopt.String ("envvar[=value]", append_envvar), s_"Carry/set this environment variable";
+ [ "--skip-base" ], Getopt.Clear use_base, s_"Skip the inclusion of the 'base' element";
+ [ "--root-label" ], Getopt.String ("label", set_root_label), s_"Label for the root fs";
+ [ "--install-type" ], Getopt.Set_string ("type", install_type), s_"Installation type";
+ [ "--image-cache" ], Getopt.String ("directory", set_image_cache), s_"Location for cached images";
+ [ "-u" ], Getopt.Clear compressed, "Do not compress the qcow2 image";
+ [ "--qemu-img-options" ], Getopt.String ("option", set_qemu_img_options),
+ s_"Add qemu-img options";
+ [ "--mkfs-options" ], Getopt.String ("option", set_mkfs_options),
+ s_"Add mkfs options";
+ [ "--extra-packages" ], Getopt.String ("pkg,...", append_extra_packages),
+ s_"Add extra packages to install";
+
+ [ "--ramdisk" ], Getopt.Set is_ramdisk, "Switch to a ramdisk build";
+ [ "--ramdisk-element" ], Getopt.Set_string ("name", ramdisk_element), s_"Main element for building ramdisks";
+
+ [ "--name" ], Getopt.Set_string ("name", image_name), s_"Name of the image";
+ [ "--fs-type" ], Getopt.Set_string ("fs", fs_type), s_"Filesystem for the image";
+ [ "--size" ], Getopt.String ("size", set_size), s_"Set output disk size";
+ [ "--formats" ], Getopt.String ("qcow2,tgz,...", set_format), s_"Output formats";
+ [ "--arch" ], Getopt.Set_string ("arch", arch), s_"Output architecture";
+ [ "--drive" ], Getopt.String ("path", set_drive), s_"Optional drive for caches";
+
+ [ "-m"; "--memsize" ], Getopt.Int ("mb", set_memsize), s_"Set memory size";
+ [ "--network" ], Getopt.Set network, s_"Enable appliance network (default)";
+ [ "--no-network" ], Getopt.Clear network, s_"Disable appliance network";
+ [ "--smp" ], Getopt.Int ("vcpus", set_smp), s_"Set number of vCPUs";
+ [ "--no-delete-on-failure" ], Getopt.Clear delete_on_failure,
+ s_"Don't delete output file on failure";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+
+ [ "--debug" ], Getopt.Int ("level", set_debug), s_"Set debug level";
+ [ "-B" ], Getopt.Set_string ("path", basepath), s_"Base path of diskimage-builder library";
] in
- let argspec = set_standard_options argspec in
-
- Arg.parse argspec append_element usage_msg;
+ let opthandle = create_standard_options argspec ~anon_fun:append_element usage_msg in
+ Getopt.parse opthandle;
let debug = !debug in
let basepath = !basepath in
diff --git a/generator/customize.ml b/generator/customize.ml
index 8caf2b5..0924732 100644
--- a/generator/customize.ml
+++ b/generator/customize.ml
@@ -568,7 +568,7 @@ let rec generate_customize_cmdline_mli () =
pr "\n";
pr "\
-type argspec = Arg.key * Arg.spec * Arg.doc
+type argspec = Getopt.keys * Getopt.spec * Getopt.doc
val argspec : unit -> (argspec * string option * string) list * (unit -> ops)
(** This returns a pair [(list, get_ops)].
@@ -598,7 +598,7 @@ open Customize_utils
pr "\n";
pr "\
-type argspec = Arg.key * Arg.spec * Arg.doc
+type argspec = Getopt.keys * Getopt.spec * Getopt.doc
let rec argspec () =
let ops = ref [] in
@@ -652,115 +652,123 @@ let rec argspec () =
| { op_type = Unit; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.Unit (fun () -> push_front %s ops),\n" discrim;
- pr " \" \" ^ s_\"%s\"\n" shortdesc;
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.Unit (fun () -> push_front %s ops),\n" discrim;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " None, %S;\n" longdesc
| { op_type = String v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (fun s -> push_front (%s s) ops),\n" discrim;
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (s_\"%s\", fun s -> push_front (%s s) ops),\n" v discrim;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = StringPair v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let p = split_string_pair \"%s\" s in\n" name;
pr " push_front (%s p) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = StringList v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let ss = split_string_list s in\n";
pr " push_front (%s ss) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = TargetLinks v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let ss = split_links_list \"%s\" s in\n" name;
pr " push_front (%s ss) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = PasswordSelector v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let sel = Password.parse_selector s in\n";
pr " push_front (%s sel) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = UserPasswordSelector v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let user, sel = split_string_pair \"%s\" s in\n" name;
pr " let sel = Password.parse_selector sel in\n";
pr " push_front (%s (user, sel)) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = SSHKeySelector v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let user, selstr = String.split \":\" s in\n";
pr " let sel = Ssh_key.parse_selector selstr in\n";
pr " push_front (%s (user, sel)) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = StringFn (v, fn); op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " %s s;\n" fn;
pr " push_front (%s s) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = SMPoolSelector v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let sel = Subscription_manager.parse_pool_selector s in\n";
pr " push_front (%s sel) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
) ops;
@@ -770,37 +778,39 @@ let rec argspec () =
| { flag_type = FlagBool default; flag_ml_var = var; flag_name = name;
flag_shortdesc = shortdesc; flag_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
+ pr " [ \"--%s\" ],\n" name;
if default (* is true *) then
- pr " Arg.Clear %s,\n" var
+ pr " Getopt.Clear %s,\n" var
else
- pr " Arg.Set %s,\n" var;
- pr " \" \" ^ s_\"%s\"\n" shortdesc;
+ pr " Getopt.Set %s,\n" var;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " None, %S;\n" longdesc
| { flag_type = FlagPasswordCrypto v; flag_ml_var = var;
flag_name = name; flag_shortdesc = shortdesc;
flag_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " %s := Some (Password.password_crypto_of_string s)\n" var;
pr " ),\n";
- pr " \"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { flag_type = FlagSMCredentials v; flag_ml_var = var;
flag_name = name; flag_shortdesc = shortdesc;
flag_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " %s := Some (Subscription_manager.parse_credentials_selector s)\n"
var;
pr " ),\n";
- pr " \"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
) flags;
@@ -844,13 +854,13 @@ pr " ] in
fun (cmd, arg) ->
try
let ((_, spec, _), _, _) = List.find (
- fun ((key, _, _), _, _) ->
- key = \"--\" ^ cmd
+ fun ((keys, _, _), _, _) ->
+ List.mem (\"--\" ^ cmd) keys
) argspec in
(match spec with
- | Arg.Unit fn -> fn ()
- | Arg.String fn -> fn arg
- | Arg.Set varref -> varref := true
+ | Getopt.Unit fn -> fn ()
+ | Getopt.String (_, fn) -> fn arg
+ | Getopt.Set varref -> varref := true
| _ -> error \"INTERNAL error: spec not handled for %%s\" cmd
)
with Not_found ->
diff --git a/get-kernel/Makefile.am b/get-kernel/Makefile.am
index 6892fbb..c20de07 100644
--- a/get-kernel/Makefile.am
+++ b/get-kernel/Makefile.am
@@ -28,6 +28,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/uri-c.c \
../fish/uri.c
@@ -59,6 +60,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/URI.cmo \
$(SOURCES_ML:.ml=.cmo)
diff --git a/get-kernel/get_kernel.ml b/get-kernel/get_kernel.ml
index fed9faf..b841c5f 100644
--- a/get-kernel/get_kernel.ml
+++ b/get-kernel/get_kernel.ml
@@ -50,24 +50,17 @@ let parse_cmdline () =
error (f_"--prefix option can only be given once");
prefix := Some p in
- let ditto = " -\"-" in
let argspec = [
- "-a", Arg.String set_file, s_"file" ^ " " ^ s_"Add disk image file";
- "--add", Arg.String set_file, s_"file" ^ " " ^ s_"Add disk image file";
- "-c", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "--connect", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "-d", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "--domain", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "--format", Arg.Set_string format, s_"format" ^ " " ^ s_"Format of input disk";
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-o", Arg.Set_string output, s_"directory" ^ " " ^ s_"Output directory";
- "--output", Arg.Set_string output, ditto;
- "--unversioned-names", Arg.Set unversioned,
- " " ^ s_"Use unversioned names for files";
- "--prefix", Arg.String set_prefix, "prefix" ^ " " ^ s_"Prefix for files";
+ [ "-a"; "--add" ], Getopt.String (s_"file", set_file), s_"Add disk image file";
+ [ "-c"; "--connect" ], Getopt.Set_string (s_"uri", libvirturi), s_"Set libvirt URI";
+ [ "-d"; "--domain" ], Getopt.String (s_"domain", set_domain), s_"Set libvirt guest name";
+ [ "--format" ], Getopt.Set_string (s_"format", format), s_"Format of input disk";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-o"; "--output" ], Getopt.Set_string (s_"directory", output), s_"Output directory";
+ [ "--unversioned-names" ], Getopt.Set unversioned,
+ s_"Use unversioned names for files";
+ [ "--prefix" ], Getopt.String (s_"prefix", set_prefix), s_"Prefix for files";
] in
- let argspec = set_standard_options argspec in
- let anon_fun _ = raise (Arg.Bad (s_"extra parameter on the command line")) in
let usage_msg =
sprintf (f_"\
%s: extract kernel and ramdisk from a guest
@@ -76,7 +69,8 @@ A short summary of the options is given below. For detailed help please
read the man page virt-get-kernel(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ let opthandle = create_standard_options argspec usage_msg in
+ Getopt.parse opthandle;
(* Machine-readable mode? Print out some facts about what
* this binary supports.
diff --git a/mllib/Makefile.am b/mllib/Makefile.am
index e728d54..041d09a 100644
--- a/mllib/Makefile.am
+++ b/mllib/Makefile.am
@@ -31,6 +31,7 @@ SOURCES_MLI = \
curl.mli \
dev_t.mli \
fsync.mli \
+ getopt.mli \
JSON.mli \
mkdtemp.mli \
planner.mli \
@@ -44,6 +45,7 @@ SOURCES_ML = \
$(OCAML_BYTES_COMPAT_ML) \
libdir.ml \
common_gettext.ml \
+ getopt.ml \
dev_t.ml \
common_utils.ml \
fsync.ml \
@@ -61,6 +63,7 @@ SOURCES_C = \
../fish/uri.c \
dev_t-c.c \
fsync-c.c \
+ getopt-c.c \
mkdtemp-c.c \
progress-c.c \
statvfs-c.c \
@@ -142,15 +145,18 @@ libdir.ml: Makefile
common_utils_tests_SOURCES = \
dev_t-c.c \
+ getopt-c.c \
dummy.c
common_utils_tests_CPPFLAGS = \
-I. \
-I$(top_builddir) \
- -I$(shell $(OCAMLC) -where)
+ -I$(shell $(OCAMLC) -where) \
+ -I$(top_srcdir)/src
common_utils_tests_BOBJECTS = \
guestfs_config.cmo \
common_gettext.cmo \
dev_t.cmo \
+ getopt.cmo \
common_utils.cmo \
common_utils_tests.cmo
common_utils_tests_XOBJECTS = $(common_utils_tests_BOBJECTS:.cmo=.cmx)
@@ -178,7 +184,7 @@ endif
common_utils_tests_DEPENDENCIES = $(common_utils_tests_THEOBJECTS) $(top_srcdir)/ocaml-link.sh
common_utils_tests_LINK = \
- $(top_srcdir)/ocaml-link.sh -- \
+ $(top_srcdir)/ocaml-link.sh -cclib '-lutils $(LIBXML2_LIBS) -lgnu' -- \
$(OCAMLFIND) $(BEST) $(OCAMLFLAGS) $(OCAMLPACKAGES) $(OCAMLPACKAGES_TESTS) $(OCAMLLINKFLAGS) \
$(common_utils_tests_THEOBJECTS) -o $@
diff --git a/mllib/common_utils.ml b/mllib/common_utils.ml
index 69118da..2379e61 100644
--- a/mllib/common_utils.ml
+++ b/mllib/common_utils.ml
@@ -566,67 +566,20 @@ let human_size i =
)
)
-(* Skip any leading '-' characters when comparing command line args. *)
-let skip_dashes str =
- let n = String.length str in
- let rec loop i =
- if i >= n then invalid_arg "skip_dashes"
- else if String.unsafe_get str i = '-' then loop (i+1)
- else i
- in
- let i = loop 0 in
- if i = 0 then str
- else String.sub str i (n-i)
-
-let compare_command_line_args a b =
- compare (String.lowercase (skip_dashes a)) (String.lowercase (skip_dashes b))
-
-(* Implement `--short-options' and `--long-options'. *)
-let long_options = ref ([] : (Arg.key * Arg.spec * Arg.doc) list)
-let display_short_options () =
- List.iter (
- fun (arg, _, _) ->
- if String.is_prefix arg "-" && not (String.is_prefix arg "--") then
- printf "%s\n" arg
- ) !long_options;
- exit 0
-let display_long_options () =
- List.iter (
- fun (arg, _, _) ->
- if String.is_prefix arg "--" && arg <> "--long-options" &&
- arg <> "--short-options" then
- printf "%s\n" arg
- ) !long_options;
- exit 0
-
-let set_standard_options argspec =
+let create_standard_options argspec ?anon_fun usage_msg =
(** Install an exit hook to check gc consistency for --debug-gc *)
let set_debug_gc () =
at_exit (fun () -> Gc.compact()) in
let argspec = [
- "--short-options", Arg.Unit display_short_options, " " ^ s_"List short options (internal)";
- "--long-options", Arg.Unit display_long_options, " " ^ s_"List long options (internal)";
- "-V", Arg.Unit print_version_and_exit,
- " " ^ s_"Display version and exit";
- "--version", Arg.Unit print_version_and_exit,
- " " ^ s_"Display version and exit";
- "-v", Arg.Unit set_verbose, " " ^ s_"Enable libguestfs debugging messages";
- "--verbose", Arg.Unit set_verbose, " " ^ s_"Enable libguestfs debugging messages";
- "-x", Arg.Unit set_trace, " " ^ s_"Enable tracing of libguestfs calls";
- "--debug-gc", Arg.Unit set_debug_gc, " " ^ s_"Debug GC and memory allocations (internal)";
- "-q", Arg.Unit set_quiet, " " ^ s_"Don't print progress messages";
- "--quiet", Arg.Unit set_quiet, " " ^ s_"Don't print progress messages";
- "--color", Arg.Unit set_colours, " " ^ s_"Use ANSI colour sequences even if not tty";
- "--colors", Arg.Unit set_colours, " " ^ s_"Use ANSI colour sequences even if not tty";
- "--colour", Arg.Unit set_colours, " " ^ s_"Use ANSI colour sequences even if not tty";
- "--colours", Arg.Unit set_colours, " " ^ s_"Use ANSI colour sequences even if not tty";
+ [ "-V"; "--version" ], Getopt.Unit print_version_and_exit, s_"Display version and exit";
+ [ "-v"; "--verbose" ], Getopt.Unit set_verbose, s_"Enable libguestfs debugging messages";
+ [ "-x" ], Getopt.Unit set_trace, s_"Enable tracing of libguestfs calls";
+ [ "--debug-gc" ], Getopt.Unit set_debug_gc, s_"Debug GC and memory allocations (internal)";
+ [ "-q"; "--quiet" ], Getopt.Unit set_quiet, s_"Don't print progress messages";
+ [ "--color"; "--colors";
+ "--colour"; "--colours" ], Getopt.Unit set_colours, s_"Use ANSI colour sequences even if not tty";
] @ argspec in
- let argspec =
- let cmp (arg1, _, _) (arg2, _, _) = compare_command_line_args arg1 arg2 in
- List.sort cmp argspec in
- let argspec = Arg.align argspec in
- long_options := argspec;
- argspec
+ Getopt.create argspec ?anon_fun usage_msg
(* Compare two version strings intelligently. *)
let rex_numbers = Str.regexp "^\\([0-9]+\\)\\(.*\\)$"
diff --git a/mllib/common_utils.mli b/mllib/common_utils.mli
index 9b1086c..b45cdbd 100644
--- a/mllib/common_utils.mli
+++ b/mllib/common_utils.mli
@@ -254,17 +254,11 @@ val parse_resize : int64 -> string -> int64
val human_size : int64 -> string
(** Converts a size in bytes to a human-readable string. *)
-val skip_dashes : string -> string
-(** Skip any leading '-' characters when comparing command line args. *)
-
-val compare_command_line_args : string -> string -> int
-(** Compare command line arguments for equality, ignoring any leading [-]s. *)
-
-val set_standard_options : (Arg.key * Arg.spec * Arg.doc) list -> (Arg.key * Arg.spec * Arg.doc) list
+val create_standard_options : Getopt.speclist -> ?anon_fun:Getopt.anon_fun -> Getopt.usage_msg -> Getopt.t
(** Adds the standard libguestfs command line options to the specified ones,
sorting them, and setting [long_options] to them.
- Returns the resulting options. *)
+ Returns a new [Getopt.t] handle. *)
val compare_version : string -> string -> int
(** Compare two version strings. *)
diff --git a/mllib/getopt-c.c b/mllib/getopt-c.c
new file mode 100644
index 0000000..1f129a7
--- /dev/null
+++ b/mllib/getopt-c.c
@@ -0,0 +1,316 @@
+/* argument parsing using getopt(3)
+ * Copyright (C) 2016 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <getopt.h>
+#include <stdbool.h>
+#include <libintl.h>
+#include <errno.h>
+#include <error.h>
+#include <assert.h>
+
+#include <caml/alloc.h>
+#include <caml/fail.h>
+#include <caml/memory.h>
+#include <caml/mlvalues.h>
+#include <caml/callback.h>
+#include <caml/printexc.h>
+
+#include "guestfs-internal-frontend.h"
+
+extern value guestfs_int_mllib_getopt_parse (value argsv, value specsv, value anon_funv, value usage_msgv);
+
+#define Val_none Val_int(0)
+
+#ifdef HAVE_ATTRIBUTE_CLEANUP
+#define CLEANUP_FREE_OPTION_LIST __attribute__((cleanup(cleanup_option_list)))
+
+static void
+cleanup_option_list (void *ptr)
+{
+ struct option *opts = * (struct option **) ptr;
+ struct option *p = opts;
+
+ while (p->name != NULL) {
+ /* Cast the constness away, since we created the names on heap. */
+ free ((char *) p->name);
+ ++p;
+ }
+ free (opts);
+}
+
+#else
+#define CLEANUP_FREE_OPTION_LIST
+#endif
+
+static void __attribute__((noreturn))
+show_error (int status)
+{
+ fprintf (stderr, _("Try `%s --help' for more information.\n"),
+ guestfs_int_program_name);
+ exit (status);
+}
+
+static int
+find_spec (value specsv, int specs_len, char opt)
+{
+ CAMLparam1 (specsv);
+ CAMLlocal1 (keysv);
+ int i, ret;
+
+ for (i = 0; i < specs_len; ++i) {
+ int len, j;
+
+ keysv = Field (Field (specsv, i), 0);
+ len = Wosize_val (keysv);
+
+ for (j = 0; j < len; ++j) {
+ const char *key = String_val (Field (keysv, j));
+
+ if (key[0] == '-' && key[1] == opt) {
+ ret = i;
+ goto done;
+ }
+ }
+ }
+
+ ret = -1;
+
+ done:
+ CAMLreturnT (int, ret);
+}
+
+static void
+do_call1 (value funv, value paramv)
+{
+ CAMLparam2 (funv, paramv);
+ CAMLlocal1 (rv);
+
+ rv = caml_callback_exn (funv, paramv);
+
+ if (Is_exception_result (rv))
+ fprintf (stderr,
+ "libguestfs: uncaught OCaml exception in getopt callback: %s\n",
+ caml_format_exception (Extract_exception (rv)));
+
+ CAMLreturn0;
+}
+
+value
+guestfs_int_mllib_getopt_parse (value argsv, value specsv, value anon_funv, value usage_msgv)
+{
+ CAMLparam4 (argsv, specsv, anon_funv, usage_msgv);
+ CAMLlocal5 (specv, keysv, actionv, v, v2);
+ size_t argc;
+ CLEANUP_FREE_STRING_LIST char **argv = NULL;
+ size_t specs_len, i;
+ CLEANUP_FREE char *optstring = NULL;
+ int optstring_len = 0;
+ CLEANUP_FREE_OPTION_LIST struct option *longopts = NULL;
+ int longopts_len = 0;
+ int c;
+ int specv_index;
+
+ argc = Wosize_val (argsv);
+ argv = malloc (sizeof (char *) * (argc + 1));
+ if (argv == NULL)
+ caml_raise_out_of_memory ();
+ for (i = 0; i < argc; ++i) {
+ argv[i] = strdup (String_val (Field (argsv, i)));
+ if (argv[i] == NULL)
+ caml_raise_out_of_memory ();
+ }
+ argv[argc] = NULL;
+
+ specs_len = Wosize_val (specsv);
+
+ optstring = malloc (1);
+ if (optstring == NULL)
+ caml_raise_out_of_memory ();
+ longopts = malloc (sizeof (*longopts));
+ if (longopts == NULL)
+ caml_raise_out_of_memory ();
+
+ for (i = 0; i < specs_len; ++i) {
+ size_t len, j;
+
+ specv = Field (specsv, i);
+ keysv = Field (specv, 0);
+ actionv = Field (specv, 1);
+ len = Wosize_val (keysv);
+
+ assert (len != 0);
+
+ for (j = 0; j < len; ++j) {
+ const char *key = String_val (Field (keysv, j));
+ size_t key_len = strlen (key);
+ int has_arg = 0;
+
+ /* We assume that the key is valid, with the checks done in the
+ * OCaml Getopt.parse_argv. */
+ ++key;
+ if (key[0] == '-')
+ ++key;
+
+ switch (Tag_val (actionv)) {
+ case 0: /* Unit of (unit -> unit) */
+ case 1: /* Set of bool ref */
+ case 2: /* Clear of bool ref */
+ has_arg = 0;
+ break;
+
+ case 3: /* String of string * (string -> unit) */
+ case 4: /* Set_string of string * string ref */
+ case 5: /* Int of string * (int -> unit) */
+ case 6: /* Set_int of string * int ref */
+ has_arg = 1;
+ break;
+
+ default:
+ error (EXIT_FAILURE, 0,
+ "internal error: unhandled Tag_val (actionv) = %d",
+ Tag_val (actionv));
+ }
+
+ if (key_len == 2) { /* Single letter short option. */
+ char *newstring = realloc (optstring, optstring_len + 1 + has_arg + 1);
+ if (newstring == NULL)
+ caml_raise_out_of_memory ();
+ optstring = newstring;
+ optstring[optstring_len++] = key[0];
+ if (has_arg)
+ optstring[optstring_len++] = ':';
+ } else {
+ struct option *newopts = realloc (longopts, (longopts_len + 1 + 1) * sizeof (*longopts));
+ if (newopts == NULL)
+ caml_raise_out_of_memory ();
+ longopts = newopts;
+ longopts[longopts_len].name = strdup (key);
+ if (longopts[longopts_len].name == NULL)
+ caml_raise_out_of_memory ();
+ longopts[longopts_len].has_arg = has_arg;
+ longopts[longopts_len].flag = &specv_index;
+ longopts[longopts_len].val = i;
+ ++longopts_len;
+ }
+ }
+ }
+
+ /* Zero entries at the end. */
+ optstring[optstring_len] = 0;
+ longopts[longopts_len].name = NULL;
+ longopts[longopts_len].has_arg = 0;
+ longopts[longopts_len].flag = NULL;
+ longopts[longopts_len].val = 0;
+
+ for (;;) {
+ int option_index = -1;
+ c = getopt_long_only (argc, argv, optstring, longopts, &option_index);
+ if (c == -1) break;
+
+ switch (c) {
+ case '?':
+ show_error (EXIT_FAILURE);
+ break;
+
+ case 0:
+ /* specv_index set already -- nothing to do. */
+ break;
+
+ default:
+ specv_index = find_spec (specsv, specs_len, c);
+ break;
+ }
+
+ specv = Field (specsv, specv_index);
+ actionv = Field (specv, 1);
+
+ switch (Tag_val (actionv)) {
+ int num;
+
+ case 0: /* Unit of (unit -> unit) */
+ v = Field (actionv, 0);
+ do_call1 (v, Val_unit);
+ break;
+
+ case 1: /* Set of bool ref */
+ caml_modify (&Field (Field (actionv, 0), 0), Val_true);
+ break;
+
+ case 2: /* Clear of bool ref */
+ caml_modify (&Field (Field (actionv, 0), 0), Val_false);
+ break;
+
+ case 3: /* String of string * (string -> unit) */
+ v = Field (actionv, 1);
+ v2 = caml_copy_string (optarg);
+ do_call1 (v, v2);
+ break;
+
+ case 4: /* Set_string of string * string ref */
+ v = caml_copy_string (optarg);
+ caml_modify (&Field (Field (actionv, 1), 0), v);
+ break;
+
+ case 5: /* Int of string * (int -> unit) */
+ if (sscanf (optarg, "%d", &num) != 1) {
+ fprintf (stderr, _("'%s' is not a numeric value.\n"),
+ guestfs_int_program_name);
+ show_error (EXIT_FAILURE);
+ }
+ v = Field (actionv, 1);
+ do_call1 (v, Val_int (num));
+ break;
+
+ case 6: /* Set_int of string * int ref */
+ if (sscanf (optarg, "%d", &num) != 1) {
+ fprintf (stderr, _("'%s' is not a numeric value.\n"),
+ guestfs_int_program_name);
+ show_error (EXIT_FAILURE);
+ }
+ caml_modify (&Field (Field (actionv, 1), 0), Val_int (num));
+ break;
+
+ default:
+ error (EXIT_FAILURE, 0,
+ "internal error: unhandled Tag_val (actionv) = %d",
+ Tag_val (actionv));
+ }
+ }
+
+ if (optind < (int) argc) {
+ if (anon_funv == Val_none) {
+ fprintf (stderr, _("Extra parameter on the command line: '%s'.\n"),
+ argv[optind]);
+ show_error (EXIT_FAILURE);
+ }
+ v = Field (anon_funv, 0);
+ while (optind < (int) argc) {
+ v2 = caml_copy_string (argv[optind++]);
+ do_call1 (v, v2);
+ }
+ }
+
+ CAMLreturn (Val_unit);
+}
diff --git a/mllib/getopt.ml b/mllib/getopt.ml
new file mode 100644
index 0000000..90f4c44
--- /dev/null
+++ b/mllib/getopt.ml
@@ -0,0 +1,203 @@
+(* Command line handling for OCaml tools in libguestfs.
+ * Copyright (C) 2016 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *)
+
+open Common_gettext.Gettext
+
+open Printf
+
+type spec =
+ | Unit of (unit -> unit)
+ | Set of bool ref
+ | Clear of bool ref
+ | String of string * (string -> unit)
+ | Set_string of string * string ref
+ | Int of string * (int -> unit)
+ | Set_int of string * int ref
+
+type keys = string list
+type doc = string
+type usage_msg = string
+type anon_fun = (string -> unit)
+type c_keys = string array
+
+type speclist = (keys * spec * doc) list
+
+type t = {
+ mutable specs : speclist;
+ anon_fun : anon_fun option;
+ usage_msg : usage_msg;
+}
+
+external getopt_parse : string array -> (c_keys * spec * doc) array -> ?anon_fun:anon_fun -> usage_msg -> unit = "guestfs_int_mllib_getopt_parse"
+
+let column_wrap = 38
+
+let show_help h () =
+ let b = Buffer.create 1024 in
+
+ let spaces n =
+ String.make n ' ' in
+
+ let prologue = sprintf (f_"%s\nOptions:\n") h.usage_msg in
+ Buffer.add_string b prologue;
+
+ List.iter (
+ fun (keys, spec, doc) ->
+ let columns = ref 0 in
+ let add s =
+ Buffer.add_string b s;
+ columns := !columns + (String.length s)
+ in
+
+ add " ";
+ add (String.concat ", " keys);
+ let arg =
+ match spec with
+ | Unit _
+ | Set _
+ | Clear _ -> None
+ | String (arg, _)
+ | Set_string (arg, _)
+ | Int (arg, _)
+ | Set_int (arg, _) -> Some arg in
+ (match arg with
+ | None -> ()
+ | Some arg ->
+ add (sprintf " <%s>" arg)
+ );
+ if !columns >= column_wrap then (
+ Buffer.add_char b '\n';
+ Buffer.add_string b (spaces column_wrap);
+ ) else (
+ Buffer.add_string b (spaces (column_wrap - !columns));
+ );
+ Buffer.add_string b doc;
+ Buffer.add_char b '\n';
+ ) h.specs;
+
+ Buffer.output_buffer stdout b;
+ exit 0
+
+let is_prefix str prefix =
+ let n = String.length prefix in
+ String.length str >= n && String.sub str 0 n = prefix
+
+(* Implement `--short-options' and `--long-options'. *)
+let display_short_options h () =
+ List.iter (
+ fun (args, _, _) ->
+ List.iter (
+ fun arg ->
+ if is_prefix arg "-" && not (is_prefix arg "--") then
+ printf "%s\n" arg
+ ) args
+ ) h.specs;
+ exit 0
+let display_long_options h () =
+ List.iter (
+ fun (args, _, _) ->
+ List.iter (
+ fun arg ->
+ if is_prefix arg "--" && arg <> "--long-options" &&
+ arg <> "--short-options" then
+ printf "%s\n" arg
+ ) args
+ ) h.specs;
+ exit 0
+
+(* Skip any leading '-' characters when comparing command line args. *)
+let skip_dashes str =
+ let n = String.length str in
+ let rec loop i =
+ if i >= n then invalid_arg "skip_dashes"
+ else if String.unsafe_get str i = '-' then loop (i+1)
+ else i
+ in
+ let i = loop 0 in
+ if i = 0 then str
+ else String.sub str i (n-i)
+
+let compare_command_line_args a b =
+ compare (String.lowercase (skip_dashes a)) (String.lowercase (skip_dashes b))
+
+let create specs ?anon_fun usage_msg =
+ (* Sanity check the input *)
+ let validate_key key =
+ if String.length key == 0 || key == "-" || key == "--"
+ || key.[0] != '-' then
+ invalid_arg (sprintf "invalid option key: '%s'" key)
+ in
+
+ List.iter (
+ fun (keys, spec, doc) ->
+ if keys == [] then
+ invalid_arg "empty keys for Getopt spec";
+ List.iter validate_key keys;
+ ) specs;
+
+ let t =
+ {
+ specs = []; (* Set it later, with own options, and sorted. *)
+ anon_fun = anon_fun;
+ usage_msg = usage_msg;
+ } in
+
+ let specs = specs @ [
+ [ "--short-options" ], Unit (display_short_options t), s_"List short options (internal)";
+ [ "--long-options" ], Unit (display_long_options t), s_"List long options (internal)";
+ ] in
+
+ (* Decide whether the help option can be added, and which switches use. *)
+ let has_dash_help = ref false in
+ let has_dash_dash_help = ref false in
+ List.iter (
+ fun (keys, _, _) ->
+ if not (!has_dash_help) then
+ has_dash_help := List.mem "-help" keys;
+ if not (!has_dash_dash_help) then
+ has_dash_dash_help := List.mem "--help" keys;
+ ) specs;
+ let help_keys = [] @
+ (if !has_dash_help then [] else [ "-help" ]) @
+ (if !has_dash_dash_help then [] else [ "--help" ]) in
+ let specs = specs @
+ (if help_keys <> [] then [ help_keys, Unit (show_help t), s_"Display brief help"; ] else []) in
+
+ (* Sort the specs, and set them in the handle. *)
+ let specs = List.map (
+ fun (keys, action, doc) ->
+ List.hd (List.sort compare_command_line_args keys), (keys, action, doc)
+ ) specs in
+ let specs =
+ let cmp (arg1, _) (arg2, _) = compare_command_line_args arg1 arg2 in
+ List.sort cmp specs in
+ let specs = List.map snd specs in
+ t.specs <- specs;
+
+ t
+
+let parse_argv t argv =
+ let specs = List.map (
+ fun (keys, spec, doc) ->
+ Array.of_list keys, spec, doc
+ ) t.specs in
+ let specs = Array.of_list specs in
+ getopt_parse argv specs ?anon_fun:t.anon_fun t.usage_msg
+
+let parse t =
+ parse_argv t Sys.argv
diff --git a/mllib/getopt.mli b/mllib/getopt.mli
new file mode 100644
index 0000000..9d9737e
--- /dev/null
+++ b/mllib/getopt.mli
@@ -0,0 +1,87 @@
+(* Command line handling for OCaml tools in libguestfs.
+ * Copyright (C) 2016 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *)
+
+type spec =
+ | Unit of (unit -> unit)
+ (* Simple option with no argument; call the function. *)
+ | Set of bool ref
+ (* Simple option with no argument; set the reference to true. *)
+ | Clear of bool ref
+ (* Simple option with no argument; set the reference to false. *)
+ | String of string * (string -> unit)
+ (* Option requiring an argument; the first element in the tuple
+ is the documentation string of the argument, and the second
+ is the function to call. *)
+ | Set_string of string * string ref
+ (* Option requiring an argument; the first element in the tuple
+ is the documentation string of the argument, and the second
+ is the reference to be set. *)
+ | Int of string * (int -> unit)
+ (* Option requiring an integer value as argument; the first
+ element in the tuple is the documentation string of the
+ argument, and the second is the function to call. *)
+ | Set_int of string * int ref
+ (* Option requiring an integer value as argument; the first
+ element in the tuple is the documentation string of the
+ argument, and the second is the reference to be set. *)
+
+type keys = string list
+type doc = string
+type usage_msg = string
+type anon_fun = (string -> unit)
+
+type speclist = (keys * spec * doc) list
+
+val compare_command_line_args : string -> string -> int
+(** Compare command line arguments for equality, ignoring any leading [-]s. *)
+
+type t
+(** The abstract data type. *)
+
+val create : speclist -> ?anon_fun:anon_fun -> usage_msg -> t
+(** [Getopt.create speclist ?anon_fun usage_msg] creates a new parses
+ for command line arguments.
+
+ [speclist] is a list of triples [(keys, spec, doc)]: [keys] is a
+ list of options, [spec] is the associated action, and [doc] is
+ the help text.
+
+ [anon_fun] is an optional function to handle non-option arguments;
+ not specifying one means that only options are allowed, and
+ non-options will cause an error.
+
+ [usage_msg] is the string which is printed before the list of
+ options as help text.
+*)
+
+val parse_argv : t -> string array -> unit
+(** [Getopt.parse handle args] parses the specified arguments.
+
+ [handle] is the [Getopt.t] type with the configuration of the
+ command line arguments.
+
+ [args] is the array with command line arguments, with the first
+ element representing the application name/path.
+
+ In case of errors, like non-integer value for [Int] or [Set_int],
+ an error message is printed, together with a pointer to use
+ [--help], and then the program exists with a non-zero exit
+ value. *)
+
+val parse : t -> unit
+(** Call {!Getopt.parse_argv} on [Sys.argv]. *)
diff --git a/resize/Makefile.am b/resize/Makefile.am
index da5d42d..5fb311a 100644
--- a/resize/Makefile.am
+++ b/resize/Makefile.am
@@ -32,6 +32,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
../mllib/fsync-c.c \
+ ../mllib/getopt-c.c \
../fish/progress.c \
../mllib/progress-c.c \
../fish/uri.c \
@@ -61,6 +62,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(SOURCES_ML:.ml=.cmo)
XOBJECTS = $(BOBJECTS:.cmo=.cmx)
diff --git a/resize/resize.ml b/resize/resize.ml
index f92f1b7..185f5a0 100644
--- a/resize/resize.ml
+++ b/resize/resize.ml
@@ -182,37 +182,29 @@ let main () =
let sparse = ref true in
let unknown_fs_mode = ref "warn" in
- let ditto = " -\"-" in
let argspec = [
- "--align-first", Arg.Set_string align_first, s_"never|always|auto" ^ " " ^ s_"Align first partition (default: auto)";
- "--alignment", Arg.Set_int alignment, s_"sectors" ^ " " ^ s_"Set partition alignment (default: 128 sectors)";
- "--no-copy-boot-loader", Arg.Clear copy_boot_loader, " " ^ s_"Don't copy boot loader";
- "-d", Arg.Unit set_verbose, " " ^ s_"Enable debugging messages";
- "--debug", Arg.Unit set_verbose, ditto;
- "--delete", Arg.String (add deletes), s_"part" ^ " " ^ s_"Delete partition";
- "--expand", Arg.String set_expand, s_"part" ^ " " ^ s_"Expand partition";
- "--no-expand-content", Arg.Clear expand_content, " " ^ s_"Don't expand content";
- "--no-extra-partition", Arg.Clear extra_partition, " " ^ s_"Don't create extra partition";
- "--format", Arg.Set_string format, s_"format" ^ " " ^ s_"Format of input disk";
- "--ignore", Arg.String (add ignores), s_"part" ^ " " ^ s_"Ignore partition";
- "--lv-expand", Arg.String (add lv_expands), s_"lv" ^ " " ^ s_"Expand logical volume";
- "--LV-expand", Arg.String (add lv_expands), s_"lv" ^ ditto;
- "--lvexpand", Arg.String (add lv_expands), s_"lv" ^ ditto;
- "--LVexpand", Arg.String (add lv_expands), s_"lv" ^ ditto;
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-n", Arg.Set dryrun, " " ^ s_"Don't perform changes";
- "--dry-run", Arg.Set dryrun, " " ^ s_"Don't perform changes";
- "--dryrun", Arg.Set dryrun, ditto;
- "--ntfsresize-force", Arg.Set ntfsresize_force, " " ^ s_"Force ntfsresize";
- "--output-format", Arg.Set_string output_format, s_"format" ^ " " ^ s_"Format of output disk";
- "--resize", Arg.String (add resizes), s_"part=size" ^ " " ^ s_"Resize partition";
- "--resize-force", Arg.String (add resizes_force), s_"part=size" ^ " " ^ s_"Forcefully resize partition";
- "--shrink", Arg.String set_shrink, s_"part" ^ " " ^ s_"Shrink partition";
- "--no-sparse", Arg.Clear sparse, " " ^ s_"Turn off sparse copying";
- "--unknown-filesystems", Arg.Set_string unknown_fs_mode,
- s_"ignore|warn|error" ^ " " ^ s_"Behaviour on expand unknown filesystems (default: warn)";
+ [ "--align-first" ], Getopt.Set_string (s_"never|always|auto", align_first), s_"Align first partition (default: auto)";
+ [ "--alignment" ], Getopt.Set_int (s_"sectors", alignment), s_"Set partition alignment (default: 128 sectors)";
+ [ "--no-copy-boot-loader" ], Getopt.Clear copy_boot_loader, s_"Don't copy boot loader";
+ [ "-d"; "--debug" ], Getopt.Unit set_verbose, s_"Enable debugging messages";
+ [ "--delete" ], Getopt.String (s_"part", add deletes), s_"Delete partition";
+ [ "--expand" ], Getopt.String (s_"part", set_expand), s_"Expand partition";
+ [ "--no-expand-content" ], Getopt.Clear expand_content, s_"Don't expand content";
+ [ "--no-extra-partition" ], Getopt.Clear extra_partition, s_"Don't create extra partition";
+ [ "--format" ], Getopt.Set_string (s_"format", format), s_"Format of input disk";
+ [ "--ignore" ], Getopt.String (s_"part", add ignores), s_"Ignore partition";
+ [ "--lv-expand"; "--LV-expand"; "--lvexpand"; "--LVexpand" ], Getopt.String (s_"lv", add lv_expands), s_"Expand logical volume";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-n"; "--dry-run"; "--dryrun" ], Getopt.Set dryrun, s_"Don't perform changes";
+ [ "--ntfsresize-force" ], Getopt.Set ntfsresize_force, s_"Force ntfsresize";
+ [ "--output-format" ], Getopt.Set_string (s_"format", output_format), s_"Format of output disk";
+ [ "--resize" ], Getopt.String (s_"part=size", add resizes), s_"Resize partition";
+ [ "--resize-force" ], Getopt.String (s_"part=size", add resizes_force), s_"Forcefully resize partition";
+ [ "--shrink" ], Getopt.String (s_"part", set_shrink), s_"Shrink partition";
+ [ "--no-sparse" ], Getopt.Clear sparse, s_"Turn off sparse copying";
+ [ "--unknown-filesystems" ], Getopt.Set_string (s_"ignore|warn|error", unknown_fs_mode),
+ s_"Behaviour on expand unknown filesystems (default: warn)";
] in
- let argspec = set_standard_options argspec in
let disks = ref [] in
let anon_fun s = push_front s disks in
let usage_msg =
@@ -223,7 +215,8 @@ A short summary of the options is given below. For detailed help please
read the man page virt-resize(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ let opthandle = create_standard_options argspec ~anon_fun usage_msg in
+ Getopt.parse opthandle;
if verbose () then (
printf "command line:";
diff --git a/sparsify/Makefile.am b/sparsify/Makefile.am
index f9f0f8e..467790c 100644
--- a/sparsify/Makefile.am
+++ b/sparsify/Makefile.am
@@ -38,6 +38,7 @@ SOURCES_ML = \
SOURCES_C = \
../fish/progress.c \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/progress-c.c \
../mllib/statvfs-c.c
@@ -60,6 +61,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/progress.cmo \
$(top_builddir)/mllib/StatVFS.cmo \
@@ -72,6 +74,7 @@ XOBJECTS = $(BOBJECTS:.cmo=.cmx)
OCAMLPACKAGES = \
-package str,unix \
-I $(top_builddir)/src/.libs \
+ -I $(top_builddir)/gnulib/lib/.libs \
-I $(top_builddir)/ocaml \
-I $(top_builddir)/mllib
if HAVE_OCAML_PKG_GETTEXT
@@ -79,7 +82,11 @@ OCAMLPACKAGES += -package gettext-stub
endif
OCAMLCLIBS = \
- $(LIBTINFO_LIBS)
+ -lutils \
+ $(LIBTINFO_LIBS) \
+ $(LIBXML2_LIBS) \
+ $(LIBINTL) \
+ -lgnu
OCAMLFLAGS = $(OCAML_FLAGS) $(OCAML_WARN_ERROR)
diff --git a/sparsify/cmdline.ml b/sparsify/cmdline.ml
index 0c12f8e..3593e26 100644
--- a/sparsify/cmdline.ml
+++ b/sparsify/cmdline.ml
@@ -63,21 +63,18 @@ let parse_cmdline () =
let tmp = ref "" in
let zeroes = ref [] in
- let ditto = " -\"-" in
let argspec = [
- "--check-tmpdir", Arg.String set_check_tmpdir, "ignore|..." ^ " " ^ s_"Check there is enough space in $TMPDIR";
- "--compress", Arg.Set compress, " " ^ s_"Compressed output format";
- "--convert", Arg.Set_string convert, s_"format" ^ " " ^ s_"Format of output disk (default: same as input)";
- "--format", Arg.Set_string format, s_"format" ^ " " ^ s_"Format of input disk";
- "--ignore", Arg.String (add ignores), s_"fs" ^ " " ^ s_"Ignore filesystem";
- "--in-place", Arg.Set in_place, " " ^ s_"Modify the disk image in-place";
- "--inplace", Arg.Set in_place, ditto;
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-o", Arg.Set_string option, s_"option" ^ " " ^ s_"Add qemu-img options";
- "--tmp", Arg.Set_string tmp, s_"block|dir|prebuilt:file" ^ " " ^ s_"Set temporary block device, directory or prebuilt file";
- "--zero", Arg.String (add zeroes), s_"fs" ^ " " ^ s_"Zero filesystem";
+ [ "--check-tmpdir" ], Getopt.String ("ignore|...", set_check_tmpdir), s_"Check there is enough space in $TMPDIR";
+ [ "--compress" ], Getopt.Set compress, s_"Compressed output format";
+ [ "--convert" ], Getopt.Set_string (s_"format", convert), s_"Format of output disk (default: same as input)";
+ [ "--format" ], Getopt.Set_string (s_"format", format), s_"Format of input disk";
+ [ "--ignore" ], Getopt.String (s_"fs", add ignores), s_"Ignore filesystem";
+ [ "--in-place"; "--inplace" ], Getopt.Set in_place, s_"Modify the disk image in-place";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-o" ], Getopt.Set_string (s_"option", option), s_"Add qemu-img options";
+ [ "--tmp" ], Getopt.Set_string (s_"block|dir|prebuilt:file", tmp), s_"Set temporary block device, directory or prebuilt file";
+ [ "--zero" ], Getopt.String (s_"fs", add zeroes), s_"Zero filesystem";
] in
- let argspec = set_standard_options argspec in
let disks = ref [] in
let anon_fun s = push_front s disks in
let usage_msg =
@@ -92,7 +89,8 @@ A short summary of the options is given below. For detailed help please
read the man page virt-sparsify(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ let opthandle = create_standard_options argspec ~anon_fun usage_msg in
+ Getopt.parse opthandle;
(* Dereference the rest of the args. *)
let check_tmpdir = !check_tmpdir in
diff --git a/sysprep/Makefile.am b/sysprep/Makefile.am
index d4f1173..d69786e 100644
--- a/sysprep/Makefile.am
+++ b/sysprep/Makefile.am
@@ -81,6 +81,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/uri-c.c \
../mllib/mkdtemp-c.c \
../customize/crypt-c.c \
@@ -109,6 +110,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/URI.cmo \
$(top_builddir)/mllib/mkdtemp.cmo \
diff --git a/sysprep/main.ml b/sysprep/main.ml
index 7922b43..3259d0d 100644
--- a/sysprep/main.ml
+++ b/sysprep/main.ml
@@ -117,31 +117,23 @@ let main () =
in
let basic_args = [
- "-a", Arg.String add_file, s_"file" ^ " " ^ s_"Add disk image file";
- "--add", Arg.String add_file, s_"file" ^ " " ^ s_"Add disk image file";
- "-c", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "--connect", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "-d", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "--domain", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "-n", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dryrun", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dry-run", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dump-pod", Arg.Unit dump_pod, " " ^ s_"Dump POD (internal)";
- "--dump-pod-options", Arg.Unit dump_pod_options, " " ^ s_"Dump POD for options (internal)";
- "--enable", Arg.String set_enable, s_"operations" ^ " " ^ s_"Enable specific operations";
- "--format", Arg.String set_format, s_"format" ^ " " ^ s_"Set format (default: auto)";
- "--list-operations", Arg.Unit list_operations, " " ^ s_"List supported operations";
- "--mount-options", Arg.Set_string mount_opts, s_"opts" ^ " " ^ s_"Set mount options (eg /:noatime;/var:rw,noatime)";
- "--network", Arg.Set network, " " ^ s_"Enable appliance network";
- "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network (default)";
- "--no-selinux-relabel", Arg.Unit (fun () -> ()),
- " " ^ s_"Compatibility option, does nothing";
- "--operation", Arg.String set_operations, " " ^ s_"Enable/disable specific operations";
- "--operations", Arg.String set_operations, " " ^ s_"Enable/disable specific operations";
+ [ "-a"; "--add" ], Getopt.String (s_"file", add_file), s_"Add disk image file";
+ [ "-c"; "--connect" ], Getopt.Set_string (s_"uri", libvirturi), s_"Set libvirt URI";
+ [ "-d"; "--domain" ], Getopt.String (s_"domain", set_domain), s_"Set libvirt guest name";
+ [ "-n"; "--dryrun"; "--dry-run" ], Getopt.Set dryrun, s_"Perform a dry run";
+ [ "--dump-pod" ], Getopt.Unit dump_pod, s_"Dump POD (internal)";
+ [ "--dump-pod-options" ], Getopt.Unit dump_pod_options, s_"Dump POD for options (internal)";
+ [ "--enable" ], Getopt.String (s_"operations", set_enable), s_"Enable specific operations";
+ [ "--format" ], Getopt.String (s_"format", set_format), s_"Set format (default: auto)";
+ [ "--list-operations" ], Getopt.Unit list_operations, s_"List supported operations";
+ [ "--mount-options" ], Getopt.Set_string (s_"opts", mount_opts), s_"Set mount options (eg /:noatime;/var:rw,noatime)";
+ [ "--network" ], Getopt.Set network, s_"Enable appliance network";
+ [ "--no-network" ], Getopt.Clear network, s_"Disable appliance network (default)";
+ [ "--no-selinux-relabel" ], Getopt.Unit (fun () -> ()),
+ s_"Compatibility option, does nothing";
+ [ "--operation"; "--operations" ], Getopt.String (s_"operations", set_operations), s_"Enable/disable specific operations";
] in
let args = basic_args @ Sysprep_operation.extra_args () in
- let argspec = set_standard_options args in
- let anon_fun _ = raise (Arg.Bad (s_"extra parameter on the command line")) in
let usage_msg =
sprintf (f_"\
%s: reset or unconfigure a virtual machine so clones can be made
@@ -154,7 +146,8 @@ A short summary of the options is given below. For detailed help please
read the man page virt-sysprep(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ let opthandle = create_standard_options args usage_msg in
+ Getopt.parse opthandle;
if not !format_consumed then
error (f_"--format parameter must appear before -a parameter");
diff --git a/sysprep/sysprep_operation.ml b/sysprep/sysprep_operation.ml
index 73020d5..b4d650f 100644
--- a/sysprep/sysprep_operation.ml
+++ b/sysprep/sysprep_operation.ml
@@ -49,7 +49,7 @@ type operation = {
perform_on_devices : device_side_effects callback option;
}
and extra_arg = {
- extra_argspec : Arg.key * Arg.spec * Arg.doc;
+ extra_argspec : Getopt.keys * Getopt.spec * Getopt.doc;
extra_pod_argval : string option;
extra_pod_description : string;
}
@@ -208,30 +208,37 @@ let dump_pod_options () =
let args = List.map (
function
| (op_name,
- { extra_argspec = (arg_name,
- (Arg.Unit _ | Arg.Bool _ | Arg.Set _ | Arg.Clear _),
+ { extra_argspec = (arg_names,
+ (Getopt.Unit _ | Getopt.Set _ | Getopt.Clear _),
_);
extra_pod_argval = None;
extra_pod_description = pod }) ->
- let heading = sprintf "B<%s>" arg_name in
- arg_name, (op_name, heading, pod)
+ List.map (
+ fun arg_name ->
+ let heading = sprintf "B<%s>" arg_name in
+ arg_name, (op_name, heading, pod)
+ ) arg_names
| (op_name,
- { extra_argspec = (arg_name,
- (Arg.String _ | Arg.Set_string _ | Arg.Int _ |
- Arg.Set_int _ | Arg.Float _ | Arg.Set_float _),
+ { extra_argspec = (arg_names,
+ (Getopt.String _ | Getopt.Set_string _ | Getopt.Int _ |
+ Getopt.Set_int _),
_);
extra_pod_argval = Some arg_val;
extra_pod_description = pod }) ->
- let heading = sprintf "B<%s> %s" arg_name arg_val in
- arg_name, (op_name, heading, pod)
+ List.map (
+ fun arg_name ->
+ let heading = sprintf "B<%s> %s" arg_name arg_val in
+ arg_name, (op_name, heading, pod)
+ ) arg_names
| _ ->
failwith "sysprep_operation.ml: argument type not implemented"
) args in
+ let args = List.flatten args in
let args =
- List.sort (fun (a, _) (b, _) -> compare_command_line_args a b) args in
+ List.sort (fun (a, _) (b, _) -> Getopt.compare_command_line_args a b) args in
List.iter (
fun (arg_name, (op_name, heading, pod)) ->
diff --git a/sysprep/sysprep_operation.mli b/sysprep/sysprep_operation.mli
index f532a8c..7291dd6 100644
--- a/sysprep/sysprep_operation.mli
+++ b/sysprep/sysprep_operation.mli
@@ -106,8 +106,8 @@ type operation = {
}
and extra_arg = {
- extra_argspec : Arg.key * Arg.spec * Arg.doc;
- (** The argspec. See OCaml [Arg] module. *)
+ extra_argspec : Getopt.keys * Getopt.spec * Getopt.doc;
+ (** The argspec. See [Getopt] module in [mllib]. *)
extra_pod_argval : string option;
(** The argument value, used only in the virt-sysprep man page. *)
@@ -126,7 +126,7 @@ val bake : unit -> unit
(** 'Bake' is called after all modules have been registered. We
finalize the list of operations, sort it, and run some checks. *)
-val extra_args : unit -> (Arg.key * Arg.spec * Arg.doc) list
+val extra_args : unit -> Getopt.speclist
(** Get the list of extra arguments for the command line. *)
val dump_pod : unit -> unit
diff --git a/sysprep/sysprep_operation_script.ml b/sysprep/sysprep_operation_script.ml
index 4b3748c..cc0ec9b 100644
--- a/sysprep/sysprep_operation_script.ml
+++ b/sysprep/sysprep_operation_script.ml
@@ -129,7 +129,7 @@ B<Note:> This is different from I<--firstboot> scripts (which run
in the context of the guest when it is booting first time).
I<--script> scripts run on the host, not in the guest.");
extra_args = [
- { extra_argspec = "--scriptdir", Arg.String set_scriptdir, s_"dir" ^ " " ^ s_"Mount point on host";
+ { extra_argspec = [ "--scriptdir" ], Getopt.String (s_"dir", set_scriptdir), s_"Mount point on host";
extra_pod_argval = Some "SCRIPTDIR";
extra_pod_description = s_"\
The mount point (an empty directory on the host) used when
@@ -142,7 +142,7 @@ If I<--scriptdir> is not specified then a temporary mountpoint
will be created."
};
- { extra_argspec = "--script", Arg.String add_script, s_"script" ^ " " ^ s_"Script or program to run on guest";
+ { extra_argspec = [ "--script" ], Getopt.String (s_"script", add_script), s_"Script or program to run on guest";
extra_pod_argval = Some "SCRIPT";
extra_pod_description = s_"\
Run the named C<SCRIPT> (a shell script or program) against the
diff --git a/sysprep/sysprep_operation_user_account.ml b/sysprep/sysprep_operation_user_account.ml
index e71d5ea..cf7dc57 100644
--- a/sysprep/sysprep_operation_user_account.ml
+++ b/sysprep/sysprep_operation_user_account.ml
@@ -109,7 +109,7 @@ The \"root\" account is not removed.
See the I<--remove-user-accounts> parameter for a way to specify
how to remove only some users, or to not remove some others.");
extra_args = [
- { extra_argspec = "--remove-user-accounts", Arg.String (add_users remove_users), s_"users" ^ " " ^ s_"Users to remove";
+ { extra_argspec = [ "--remove-user-accounts" ], Getopt.String (s_"users", add_users remove_users), s_"Users to remove";
extra_pod_argval = Some "USERS";
extra_pod_description = s_"\
The user accounts to be removed from the guest.
@@ -124,7 +124,7 @@ would only remove the user accounts C<bob> and C<eve>.
This option can be specified multiple times."
};
- { extra_argspec = "--keep-user-accounts", Arg.String (add_users keep_users), s_"users" ^ " " ^ s_"Users to keep";
+ { extra_argspec = [ "--keep-user-accounts" ], Getopt.String (s_"users", add_users keep_users), s_"Users to keep";
extra_pod_argval = Some "USERS";
extra_pod_description = s_"\
The user accounts to be kept in the guest.
diff --git a/v2v/Makefile.am b/v2v/Makefile.am
index fedc84d..bca5ba3 100644
--- a/v2v/Makefile.am
+++ b/v2v/Makefile.am
@@ -97,6 +97,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/mkdtemp-c.c \
../mllib/statvfs-c.c \
domainxml-c.c \
@@ -124,6 +125,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/regedit.cmo \
$(top_builddir)/mllib/mkdtemp.cmo \
@@ -177,6 +179,7 @@ virt_v2v_LINK = \
virt_v2v_copy_to_local_SOURCES = \
../mllib/dev_t-c.c \
../mllib/statvfs-c.c \
+ ../mllib/getopt-c.c \
domainxml-c.c \
utils-c.c \
xml-c.c
@@ -195,6 +198,7 @@ COPY_TO_LOCAL_BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/JSON.cmo \
$(top_builddir)/mllib/StatVFS.cmo \
@@ -409,6 +413,7 @@ v2v_unit_tests_BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/regedit.cmo \
stringMap.cmo \
diff --git a/v2v/cmdline.ml b/v2v/cmdline.ml
index 1a729ca..e704bd4 100644
--- a/v2v/cmdline.ml
+++ b/v2v/cmdline.ml
@@ -164,57 +164,48 @@ let parse_cmdline () =
and o_options =
String.concat "|" (Modules_list.output_modules ()) in
- let ditto = " -\"-" in
let argspec = [
- "-b", Arg.String add_bridge, "in:out " ^ s_"Map bridge 'in' to 'out'";
- "--bridge", Arg.String add_bridge, "in:out " ^ ditto;
- "--compressed", Arg.Set compressed, " " ^ s_"Compress output file";
- "--dcpath", Arg.String (set_string_option_once "--dcpath" dcpath),
- "path " ^ s_"Override dcPath (for vCenter)";
- "--dcPath", Arg.String (set_string_option_once "--dcPath" dcpath),
- "path " ^ ditto;
- "--debug-overlay",Arg.Set debug_overlays,
- " " ^ s_"Save overlay files";
- "--debug-overlays",Arg.Set debug_overlays,
- ditto;
- "-i", Arg.String set_input_mode, i_options ^ " " ^ s_"Set input mode (default: libvirt)";
- "-ic", Arg.String (set_string_option_once "-ic" input_conn),
- "uri " ^ s_"Libvirt URI";
- "-if", Arg.String (set_string_option_once "-if" input_format),
- "format " ^ s_"Input format (for -i disk)";
- "--in-place", Arg.Set in_place, " " ^ s_"Only tune the guest in the input VM";
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-n", Arg.String add_network, "in:out " ^ s_"Map network 'in' to 'out'";
- "--network", Arg.String add_network, "in:out " ^ ditto;
- "--no-copy", Arg.Clear do_copy, " " ^ s_"Just write the metadata";
- "--no-trim", Arg.String no_trim_warning,
- "-" ^ " " ^ s_"Ignored for backwards compatibility";
- "-o", Arg.String set_output_mode, o_options ^ " " ^ s_"Set output mode (default: libvirt)";
- "-oa", Arg.String set_output_alloc,
- "sparse|preallocated " ^ s_"Set output allocation mode";
- "-oc", Arg.String (set_string_option_once "-oc" output_conn),
- "uri " ^ s_"Libvirt URI";
- "-of", Arg.String (set_string_option_once "-of" output_format),
- "raw|qcow2 " ^ s_"Set output format";
- "-on", Arg.String (set_string_option_once "-on" output_name),
- "name " ^ s_"Rename guest when converting";
- "-os", Arg.String (set_string_option_once "-os" output_storage),
- "storage " ^ s_"Set output storage location";
- "--password-file", Arg.String (set_string_option_once "--password-file" password_file),
- "file " ^ s_"Use password from file";
- "--print-source", Arg.Set print_source, " " ^ s_"Print source and stop";
- "--qemu-boot", Arg.Set qemu_boot, " " ^ s_"Boot in qemu (-o qemu only)";
- "--root", Arg.String set_root_choice,"ask|... " ^ s_"How to choose root filesystem";
- "--vdsm-image-uuid", Arg.String add_vdsm_image_uuid, "uuid " ^ s_"Output image UUID(s)";
- "--vdsm-vol-uuid", Arg.String add_vdsm_vol_uuid, "uuid " ^ s_"Output vol UUID(s)";
- "--vdsm-vm-uuid", Arg.String (set_string_option_once "--vdsm-vm-uuid" vdsm_vm_uuid),
- "uuid " ^ s_"Output VM UUID";
- "--vdsm-ovf-output", Arg.String (set_string_option_once "--vdsm-ovf-output" vdsm_ovf_output),
- " " ^ s_"Output OVF file";
- "--vmtype", Arg.String vmtype_warning,
- "- " ^ s_"Ignored for backwards compatibility";
+ [ "-b"; "--bridge" ], Getopt.String ("in:out", add_bridge), s_"Map bridge 'in' to 'out'";
+ [ "--compressed" ], Getopt.Set compressed, s_"Compress output file";
+ [ "--dcpath"; "--dcPath" ], Getopt.String ("path", set_string_option_once "--dcpath" dcpath),
+ s_"Override dcPath (for vCenter)";
+ [ "--debug-overlay"; "--debug-overlays" ], Getopt.Set debug_overlays, s_"Save overlay files";
+ [ "-i" ], Getopt.String (i_options, set_input_mode), s_"Set input mode (default: libvirt)";
+ [ "-ic" ], Getopt.String ("uri", set_string_option_once "-ic" input_conn),
+ s_"Libvirt URI";
+ [ "-if" ], Getopt.String ("format", set_string_option_once "-if" input_format),
+ s_"Input format (for -i disk)";
+ [ "--in-place" ], Getopt.Set in_place, s_"Only tune the guest in the input VM";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-n"; "--network" ], Getopt.String ("in:out", add_network), s_"Map network 'in' to 'out'";
+ [ "--no-copy" ], Getopt.Clear do_copy, s_"Just write the metadata";
+ [ "--no-trim" ], Getopt.String ("-", no_trim_warning),
+ s_"Ignored for backwards compatibility";
+ [ "-o" ], Getopt.String (o_options, set_output_mode), s_"Set output mode (default: libvirt)";
+ [ "-oa" ], Getopt.String ("sparse|preallocated", set_output_alloc),
+ s_"Set output allocation mode";
+ [ "-oc" ], Getopt.String ("uri", set_string_option_once "-oc" output_conn),
+ s_"Libvirt URI";
+ [ "-of" ], Getopt.String ("raw|qcow2", set_string_option_once "-of" output_format),
+ s_"Set output format";
+ [ "-on" ], Getopt.String ("name", set_string_option_once "-on" output_name),
+ s_"Rename guest when converting";
+ [ "-os" ], Getopt.String ("storage", set_string_option_once "-os" output_storage),
+ s_"Set output storage location";
+ [ "--password-file" ], Getopt.String ("file", set_string_option_once "--password-file" password_file),
+ s_"Use password from file";
+ [ "--print-source" ], Getopt.Set print_source, s_"Print source and stop";
+ [ "--qemu-boot" ], Getopt.Set qemu_boot, s_"Boot in qemu (-o qemu only)";
+ [ "--root" ], Getopt.String ("ask|... ", set_root_choice), s_"How to choose root filesystem";
+ [ "--vdsm-image-uuid" ], Getopt.String ("uuid", add_vdsm_image_uuid), s_"Output image UUID(s)";
+ [ "--vdsm-vol-uuid" ], Getopt.String ("uuid", add_vdsm_vol_uuid), s_"Output vol UUID(s)";
+ [ "--vdsm-vm-uuid" ], Getopt.String ("uuid", set_string_option_once "--vdsm-vm-uuid" vdsm_vm_uuid),
+ s_"Output VM UUID";
+ [ "--vdsm-ovf-output" ], Getopt.String ("-", set_string_option_once "--vdsm-ovf-output" vdsm_ovf_output),
+ s_"Output OVF file";
+ [ "--vmtype" ], Getopt.String ("-", vmtype_warning),
+ s_"Ignored for backwards compatibility";
] in
- let argspec = set_standard_options argspec in
let args = ref [] in
let anon_fun s = push_front s args in
let usage_msg =
@@ -239,7 +230,8 @@ A short summary of the options is given below. For detailed help please
read the man page virt-v2v(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ let opthandle = create_standard_options argspec ~anon_fun usage_msg in
+ Getopt.parse opthandle;
(* Dereference the arguments. *)
let args = List.rev !args in
diff --git a/v2v/copy_to_local.ml b/v2v/copy_to_local.ml
index 1811dca..fe34413 100644
--- a/v2v/copy_to_local.ml
+++ b/v2v/copy_to_local.ml
@@ -41,12 +41,11 @@ let rec main () =
(* Handle the command line. *)
let argspec = [
- "-ic", Arg.String (set_string_option_once "-ic" input_conn),
- "uri " ^ s_"Libvirt URI";
- "--password-file", Arg.String (set_string_option_once "--password-file" password_file),
- "file " ^ s_"Use password from file";
+ [ "-ic" ], Getopt.String ("uri", set_string_option_once "-ic" input_conn),
+ s_"Libvirt URI";
+ [ "--password-file" ], Getopt.String ("file", set_string_option_once "--password-file" password_file),
+ s_"Use password from file";
] in
- let argspec = set_standard_options argspec in
let args = ref [] in
let anon_fun s = push_front s args in
let usage_msg =
@@ -71,7 +70,8 @@ A short summary of the options is given below. For detailed help please
read the man page virt-v2v-copy-to-local(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ let opthandle = create_standard_options argspec ~anon_fun usage_msg in
+ Getopt.parse opthandle;
let args = !args in
let input_conn = !input_conn in
--
2.7.4
8 years
- 2
- 3
[PATCH v2] OCaml tools: add and use a Getopt module
by Pino Toscano
Add a new Getopt module to mllib, to parse command line arguments with
handlers close to the ones used with Arg, but using getopt(3) (actually
getopt_long_only) to do the real parsing. This allow us to provide
options for OCaml tools with a syntax similar to the C tools, and use
the additional features getopt offers and Arg does not.
Do a single-step conversion of Common_utils and all the OCaml tools to
the syntax of Getopt.
As side-change due to the conversion, extra arguments for sysprep
operation can have more keys for the same argument.
---
builder/Makefile.am | 2 +
builder/cmdline.ml | 91 +++----
customize/Makefile.am | 2 +
customize/customize_main.ml | 33 +--
dib/Makefile.am | 3 +
dib/cmdline.ml | 80 +++---
generator/customize.ml | 104 ++++----
get-kernel/Makefile.am | 2 +
get-kernel/get_kernel.ml | 26 +-
mllib/Makefile.am | 3 +
mllib/common_utils.ml | 54 ++--
mllib/common_utils.mli | 2 +-
mllib/getopt-c.c | 424 ++++++++++++++++++++++++++++++
mllib/getopt.ml | 67 +++++
mllib/getopt.mli | 73 +++++
resize/Makefile.am | 2 +
resize/resize.ml | 51 ++--
sparsify/Makefile.am | 9 +-
sparsify/cmdline.ml | 24 +-
sysprep/Makefile.am | 2 +
sysprep/main.ml | 39 ++-
sysprep/sysprep_operation.ml | 26 +-
sysprep/sysprep_operation.mli | 6 +-
sysprep/sysprep_operation_script.ml | 4 +-
sysprep/sysprep_operation_user_account.ml | 4 +-
v2v/Makefile.am | 4 +
v2v/cmdline.ml | 90 +++----
v2v/copy_to_local.ml | 10 +-
28 files changed, 900 insertions(+), 337 deletions(-)
create mode 100644 mllib/getopt-c.c
create mode 100644 mllib/getopt.ml
create mode 100644 mllib/getopt.mli
diff --git a/builder/Makefile.am b/builder/Makefile.am
index 5c41cfa..a4691d7 100644
--- a/builder/Makefile.am
+++ b/builder/Makefile.am
@@ -91,6 +91,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
../mllib/fsync-c.c \
+ ../mllib/getopt-c.c \
../mllib/uri-c.c \
../mllib/mkdtemp-c.c \
../customize/perl_edit-c.c \
@@ -137,6 +138,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/fsync.cmo \
$(top_builddir)/mllib/planner.cmo \
diff --git a/builder/cmdline.ml b/builder/cmdline.ml
index 6085b45..462554a 100644
--- a/builder/cmdline.ml
+++ b/builder/cmdline.ml
@@ -119,54 +119,47 @@ let parse_cmdline () =
let warn_if_partition = ref true in
let argspec = [
- "--arch", Arg.Set_string arch, "arch" ^ " " ^ s_"Set the output architecture";
- "--attach", Arg.String attach_disk, "iso" ^ " " ^ s_"Attach data disk/ISO during install";
- "--attach-format", Arg.String set_attach_format,
- "format" ^ " " ^ s_"Set attach disk format";
- "--cache", Arg.String set_cache, "dir" ^ " " ^ s_"Set template cache dir";
- "--no-cache", Arg.Unit no_cache, " " ^ s_"Disable template cache";
- "--cache-all-templates", Arg.Unit cache_all_mode,
- " " ^ s_"Download all templates to the cache";
- "--check-signature", Arg.Set check_signature,
- " " ^ s_"Check digital signatures";
- "--check-signatures", Arg.Set check_signature,
- " " ^ s_"Check digital signatures";
- "--no-check-signature", Arg.Clear check_signature,
- " " ^ s_"Disable digital signatures";
- "--no-check-signatures", Arg.Clear check_signature,
- " " ^ s_"Disable digital signatures";
- "--curl", Arg.Set_string curl, "curl" ^ " " ^ s_"Set curl binary/command";
- "--delete-cache", Arg.Unit delete_cache_mode,
- " " ^ s_"Delete the template cache";
- "--no-delete-on-failure", Arg.Clear delete_on_failure,
- " " ^ s_"Don't delete output file on failure";
- "--fingerprint", Arg.String add_fingerprint,
- "AAAA.." ^ " " ^ s_"Fingerprint of valid signing key";
- "--format", Arg.Set_string format, "raw|qcow2" ^ " " ^ s_"Output format (default: raw)";
- "--get-kernel", Arg.Unit get_kernel_mode,
- "image" ^ " " ^ s_"Get kernel from image";
- "--gpg", Arg.Set_string gpg, "gpg" ^ " " ^ s_"Set GPG binary/command";
- "-l", Arg.Unit list_mode, " " ^ s_"List available templates";
- "--list", Arg.Unit list_mode, " " ^ s_"List available templates";
- "--long", Arg.Unit list_set_long, " " ^ s_"Shortcut for --list-format long";
- "--list-format", Arg.String list_set_format,
- "short|long|json" ^ " " ^ s_"Set the format for --list (default: short)";
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-m", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--memsize", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--network", Arg.Set network, " " ^ s_"Enable appliance network (default)";
- "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network";
- "--notes", Arg.Unit notes_mode, " " ^ s_"Display installation notes";
- "-o", Arg.Set_string output, "file" ^ " " ^ s_"Set output filename";
- "--output", Arg.Set_string output, "file" ^ " " ^ s_"Set output filename";
- "--print-cache", Arg.Unit print_cache_mode,
- " " ^ s_"Print info about template cache";
- "--size", Arg.String set_size, "size" ^ " " ^ s_"Set output disk size";
- "--smp", Arg.Int set_smp, "vcpus" ^ " " ^ s_"Set number of vCPUs";
- "--source", Arg.String add_source, "URL" ^ " " ^ s_"Set source URL";
- "--no-sync", Arg.Clear sync, " " ^ s_"Do not fsync output file on exit";
- "--no-warn-if-partition", Arg.Clear warn_if_partition,
- " " ^ s_"Do not warn if writing to a partition";
+ [ "--arch" ], Getopt.Set_string ("arch", arch), s_"Set the output architecture";
+ [ "--attach" ], Getopt.String ("iso", attach_disk), s_"Attach data disk/ISO during install";
+ [ "--attach-format" ], Getopt.String ("format", set_attach_format),
+ s_"Set attach disk format";
+ [ "--cache" ], Getopt.String ("dir", set_cache), s_"Set template cache dir";
+ [ "--no-cache" ], Getopt.Unit no_cache, s_"Disable template cache";
+ [ "--cache-all-templates" ], Getopt.Unit cache_all_mode,
+ s_"Download all templates to the cache";
+ [ "--check-signature"; "--check-signatures" ], Getopt.Set check_signature,
+ s_"Check digital signatures";
+ [ "--no-check-signature"; "--no-check-signatures" ], Getopt.Clear check_signature,
+ s_"Disable digital signatures";
+ [ "--curl" ], Getopt.Set_string ("curl", curl), s_"Set curl binary/command";
+ [ "--delete-cache" ], Getopt.Unit delete_cache_mode,
+ s_"Delete the template cache";
+ [ "--no-delete-on-failure" ], Getopt.Clear delete_on_failure,
+ s_"Don't delete output file on failure";
+ [ "--fingerprint" ], Getopt.String ("AAAA..", add_fingerprint),
+ s_"Fingerprint of valid signing key";
+ [ "--format" ], Getopt.Set_string ("raw|qcow2", format), s_"Output format (default: raw)";
+ [ "--get-kernel" ], Getopt.Unit get_kernel_mode,
+ s_"Get kernel from image";
+ [ "--gpg" ], Getopt.Set_string ("gpg", gpg), s_"Set GPG binary/command";
+ [ "-l"; "--list" ], Getopt.Unit list_mode, s_"List available templates";
+ [ "--long" ], Getopt.Unit list_set_long, s_"Shortcut for --list-format long";
+ [ "--list-format" ], Getopt.String ("short|long|json", list_set_format),
+ s_"Set the format for --list (default: short)";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-m"; "--memsize" ], Getopt.Int ("mb", set_memsize), s_"Set memory size";
+ [ "--network" ], Getopt.Set network, s_"Enable appliance network (default)";
+ [ "--no-network" ], Getopt.Clear network, s_"Disable appliance network";
+ [ "--notes" ], Getopt.Unit notes_mode, s_"Display installation notes";
+ [ "-o"; "--output" ], Getopt.Set_string ("file", output), s_"Set output filename";
+ [ "--print-cache" ], Getopt.Unit print_cache_mode,
+ s_"Print info about template cache";
+ [ "--size" ], Getopt.String ("size", set_size), s_"Set output disk size";
+ [ "--smp" ], Getopt.Int ("vcpus", set_smp), s_"Set number of vCPUs";
+ [ "--source" ], Getopt.String ("URL", add_source), s_"Set source URL";
+ [ "--no-sync" ], Getopt.Clear sync, s_"Do not fsync output file on exit";
+ [ "--no-warn-if-partition" ], Getopt.Clear warn_if_partition,
+ s_"Do not warn if writing to a partition";
] in
let customize_argspec, get_customize_ops = Customize_cmdline.argspec () in
let customize_argspec =
@@ -192,7 +185,7 @@ A short summary of the options is given below. For detailed help please
read the man page virt-builder(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ Getopt.parse argspec ~anon_fun usage_msg;
(* Dereference options. *)
let args = List.rev !args in
diff --git a/customize/Makefile.am b/customize/Makefile.am
index de3d7e0..f18e238 100644
--- a/customize/Makefile.am
+++ b/customize/Makefile.am
@@ -70,6 +70,7 @@ SOURCES_C = \
../fish/file-edit.c \
../fish/file-edit.h \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/uri-c.c \
crypt-c.c \
perl_edit-c.c
@@ -96,6 +97,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/regedit.cmo \
$(top_builddir)/mllib/URI.cmo \
diff --git a/customize/customize_main.ml b/customize/customize_main.ml
index 3681b32..c3f15a9 100644
--- a/customize/customize_main.ml
+++ b/customize/customize_main.ml
@@ -71,24 +71,18 @@ let main () =
in
let argspec = [
- "-a", Arg.String add_file, s_"file" ^ " " ^ s_"Add disk image file";
- "--add", Arg.String add_file, s_"file" ^ " " ^ s_"Add disk image file";
- "--attach", Arg.String attach_disk, "iso" ^ " " ^ s_"Attach data disk/ISO during install";
- "--attach-format", Arg.String set_attach_format,
- "format" ^ " " ^ s_"Set attach disk format";
- "-c", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "--connect", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "-d", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "--domain", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "-n", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dryrun", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dry-run", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--format", Arg.String set_format, s_"format" ^ " " ^ s_"Set format (default: auto)";
- "-m", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--memsize", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--network", Arg.Set network, " " ^ s_"Enable appliance network (default)";
- "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network";
- "--smp", Arg.Int set_smp, "vcpus" ^ " " ^ s_"Set number of vCPUs";
+ [ "-a"; "--add" ], Getopt.String (s_"file", add_file), s_"Add disk image file";
+ [ "--attach" ], Getopt.String ("iso", attach_disk), s_"Attach data disk/ISO during install";
+ [ "--attach-format" ], Getopt.String ("format", set_attach_format),
+ s_"Set attach disk format";
+ [ "-c"; "--connect" ], Getopt.Set_string (s_"uri", libvirturi), s_"Set libvirt URI";
+ [ "-d"; "--domain" ], Getopt.String (s_"domain", set_domain), s_"Set libvirt guest name";
+ [ "-n"; "--dryrun"; "--dry-run" ], Getopt.Set dryrun, s_"Perform a dry run";
+ [ "--format" ], Getopt.String (s_"format", set_format), s_"Set format (default: auto)";
+ [ "-m"; "--memsize" ], Getopt.Int ("mb", set_memsize), s_"Set memory size";
+ [ "--network" ], Getopt.Set network, s_"Enable appliance network (default)";
+ [ "--no-network" ], Getopt.Clear network, s_"Disable appliance network";
+ [ "--smp" ], Getopt.Int ("vcpus", set_smp), s_"Set number of vCPUs";
] in
let customize_argspec, get_customize_ops =
Customize_cmdline.argspec () in
@@ -97,7 +91,6 @@ let main () =
let argspec = argspec @ customize_argspec in
let argspec = set_standard_options argspec in
- let anon_fun _ = raise (Arg.Bad (s_"extra parameter on the command line")) in
let usage_msg =
sprintf (f_"\
%s: customize a virtual machine
@@ -110,7 +103,7 @@ A short summary of the options is given below. For detailed help please
read the man page virt-customize(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ Getopt.parse argspec usage_msg;
if not !format_consumed then
error (f_"--format parameter must appear before -a parameter");
diff --git a/dib/Makefile.am b/dib/Makefile.am
index ae6e878..8f60314 100644
--- a/dib/Makefile.am
+++ b/dib/Makefile.am
@@ -34,6 +34,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/mkdtemp-c.c
bin_PROGRAMS =
@@ -60,6 +61,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/mkdtemp.cmo \
$(SOURCES_ML:.ml=.cmo)
@@ -81,6 +83,7 @@ endif
OCAMLCLIBS = \
-pthread -lpthread \
-lutils \
+ $(LIBXML2_LIBS) \
$(LIBINTL) \
-lgnu
diff --git a/dib/cmdline.ml b/dib/cmdline.ml
index ec4ebba..e969100 100644
--- a/dib/cmdline.ml
+++ b/dib/cmdline.ml
@@ -151,51 +151,49 @@ read the man page virt-dib(1).
prepend (List.rev (String.nsplit "," arg)) extra_packages in
let argspec = [
- "-p", Arg.String append_element_path, "path" ^ " " ^ s_"Add new a elements location";
- "--element-path", Arg.String append_element_path, "path" ^ " " ^ s_"Add new a elements location";
- "--exclude-element", Arg.String append_excluded_element,
- "element" ^ " " ^ s_"Exclude the specified element";
- "--exclude-script", Arg.String append_excluded_script,
- "script" ^ " " ^ s_"Exclude the specified script";
- "--envvar", Arg.String append_envvar, "envvar[=value]" ^ " " ^ s_"Carry/set this environment variable";
- "--skip-base", Arg.Clear use_base, " " ^ s_"Skip the inclusion of the 'base' element";
- "--root-label", Arg.String set_root_label, "label" ^ " " ^ s_"Label for the root fs";
- "--install-type", Arg.Set_string install_type, "type" ^ " " ^ s_"Installation type";
- "--image-cache", Arg.String set_image_cache, "directory" ^ " " ^ s_"Location for cached images";
- "-u", Arg.Clear compressed, " " ^ "Do not compress the qcow2 image";
- "--qemu-img-options", Arg.String set_qemu_img_options,
- "option" ^ " " ^ s_"Add qemu-img options";
- "--mkfs-options", Arg.String set_mkfs_options,
- "option" ^ " " ^ s_"Add mkfs options";
- "--extra-packages", Arg.String append_extra_packages,
- "pkg,..." ^ " " ^ s_"Add extra packages to install";
-
- "--ramdisk", Arg.Set is_ramdisk, " " ^ "Switch to a ramdisk build";
- "--ramdisk-element", Arg.Set_string ramdisk_element, "name" ^ " " ^ s_"Main element for building ramdisks";
-
- "--name", Arg.Set_string image_name, "name" ^ " " ^ s_"Name of the image";
- "--fs-type", Arg.Set_string fs_type, "fs" ^ " " ^ s_"Filesystem for the image";
- "--size", Arg.String set_size, "size" ^ " " ^ s_"Set output disk size";
- "--formats", Arg.String set_format, "qcow2,tgz,..." ^ " " ^ s_"Output formats";
- "--arch", Arg.Set_string arch, "arch" ^ " " ^ s_"Output architecture";
- "--drive", Arg.String set_drive, "path" ^ " " ^ s_"Optional drive for caches";
-
- "-m", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--memsize", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size";
- "--network", Arg.Set network, " " ^ s_"Enable appliance network (default)";
- "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network";
- "--smp", Arg.Int set_smp, "vcpus" ^ " " ^ s_"Set number of vCPUs";
- "--no-delete-on-failure", Arg.Clear delete_on_failure,
- " " ^ s_"Don't delete output file on failure";
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
-
- "--debug", Arg.Int set_debug, "level" ^ " " ^ s_"Set debug level";
- "-B", Arg.Set_string basepath, "path" ^ " " ^ s_"Base path of diskimage-builder library";
+ [ "-p"; "--element-path" ], Getopt.String ("path", append_element_path), s_"Add new a elements location";
+ [ "--exclude-element" ], Getopt.String ("element", append_excluded_element),
+ s_"Exclude the specified element";
+ [ "--exclude-script" ], Getopt.String ("script", append_excluded_script),
+ s_"Exclude the specified script";
+ [ "--envvar" ], Getopt.String ("envvar[=value]", append_envvar), s_"Carry/set this environment variable";
+ [ "--skip-base" ], Getopt.Clear use_base, s_"Skip the inclusion of the 'base' element";
+ [ "--root-label" ], Getopt.String ("label", set_root_label), s_"Label for the root fs";
+ [ "--install-type" ], Getopt.Set_string ("type", install_type), s_"Installation type";
+ [ "--image-cache" ], Getopt.String ("directory", set_image_cache), s_"Location for cached images";
+ [ "-u" ], Getopt.Clear compressed, "Do not compress the qcow2 image";
+ [ "--qemu-img-options" ], Getopt.String ("option", set_qemu_img_options),
+ s_"Add qemu-img options";
+ [ "--mkfs-options" ], Getopt.String ("option", set_mkfs_options),
+ s_"Add mkfs options";
+ [ "--extra-packages" ], Getopt.String ("pkg,...", append_extra_packages),
+ s_"Add extra packages to install";
+
+ [ "--ramdisk" ], Getopt.Set is_ramdisk, "Switch to a ramdisk build";
+ [ "--ramdisk-element" ], Getopt.Set_string ("name", ramdisk_element), s_"Main element for building ramdisks";
+
+ [ "--name" ], Getopt.Set_string ("name", image_name), s_"Name of the image";
+ [ "--fs-type" ], Getopt.Set_string ("fs", fs_type), s_"Filesystem for the image";
+ [ "--size" ], Getopt.String ("size", set_size), s_"Set output disk size";
+ [ "--formats" ], Getopt.String ("qcow2,tgz,...", set_format), s_"Output formats";
+ [ "--arch" ], Getopt.Set_string ("arch", arch), s_"Output architecture";
+ [ "--drive" ], Getopt.String ("path", set_drive), s_"Optional drive for caches";
+
+ [ "-m"; "--memsize" ], Getopt.Int ("mb", set_memsize), s_"Set memory size";
+ [ "--network" ], Getopt.Set network, s_"Enable appliance network (default)";
+ [ "--no-network" ], Getopt.Clear network, s_"Disable appliance network";
+ [ "--smp" ], Getopt.Int ("vcpus", set_smp), s_"Set number of vCPUs";
+ [ "--no-delete-on-failure" ], Getopt.Clear delete_on_failure,
+ s_"Don't delete output file on failure";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+
+ [ "--debug" ], Getopt.Int ("level", set_debug), s_"Set debug level";
+ [ "-B" ], Getopt.Set_string ("path", basepath), s_"Base path of diskimage-builder library";
] in
let argspec = set_standard_options argspec in
- Arg.parse argspec append_element usage_msg;
+ Getopt.parse argspec ~anon_fun:append_element usage_msg;
let debug = !debug in
let basepath = !basepath in
diff --git a/generator/customize.ml b/generator/customize.ml
index 8caf2b5..0924732 100644
--- a/generator/customize.ml
+++ b/generator/customize.ml
@@ -568,7 +568,7 @@ let rec generate_customize_cmdline_mli () =
pr "\n";
pr "\
-type argspec = Arg.key * Arg.spec * Arg.doc
+type argspec = Getopt.keys * Getopt.spec * Getopt.doc
val argspec : unit -> (argspec * string option * string) list * (unit -> ops)
(** This returns a pair [(list, get_ops)].
@@ -598,7 +598,7 @@ open Customize_utils
pr "\n";
pr "\
-type argspec = Arg.key * Arg.spec * Arg.doc
+type argspec = Getopt.keys * Getopt.spec * Getopt.doc
let rec argspec () =
let ops = ref [] in
@@ -652,115 +652,123 @@ let rec argspec () =
| { op_type = Unit; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.Unit (fun () -> push_front %s ops),\n" discrim;
- pr " \" \" ^ s_\"%s\"\n" shortdesc;
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.Unit (fun () -> push_front %s ops),\n" discrim;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " None, %S;\n" longdesc
| { op_type = String v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (fun s -> push_front (%s s) ops),\n" discrim;
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (s_\"%s\", fun s -> push_front (%s s) ops),\n" v discrim;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = StringPair v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let p = split_string_pair \"%s\" s in\n" name;
pr " push_front (%s p) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = StringList v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let ss = split_string_list s in\n";
pr " push_front (%s ss) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = TargetLinks v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let ss = split_links_list \"%s\" s in\n" name;
pr " push_front (%s ss) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = PasswordSelector v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let sel = Password.parse_selector s in\n";
pr " push_front (%s sel) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = UserPasswordSelector v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let user, sel = split_string_pair \"%s\" s in\n" name;
pr " let sel = Password.parse_selector sel in\n";
pr " push_front (%s (user, sel)) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = SSHKeySelector v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let user, selstr = String.split \":\" s in\n";
pr " let sel = Ssh_key.parse_selector selstr in\n";
pr " push_front (%s (user, sel)) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = StringFn (v, fn); op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " %s s;\n" fn;
pr " push_front (%s s) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { op_type = SMPoolSelector v; op_name = name; op_discrim = discrim;
op_shortdesc = shortdesc; op_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " let sel = Subscription_manager.parse_pool_selector s in\n";
pr " push_front (%s sel) ops\n" discrim;
pr " ),\n";
- pr " s_\"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
) ops;
@@ -770,37 +778,39 @@ let rec argspec () =
| { flag_type = FlagBool default; flag_ml_var = var; flag_name = name;
flag_shortdesc = shortdesc; flag_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
+ pr " [ \"--%s\" ],\n" name;
if default (* is true *) then
- pr " Arg.Clear %s,\n" var
+ pr " Getopt.Clear %s,\n" var
else
- pr " Arg.Set %s,\n" var;
- pr " \" \" ^ s_\"%s\"\n" shortdesc;
+ pr " Getopt.Set %s,\n" var;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " None, %S;\n" longdesc
| { flag_type = FlagPasswordCrypto v; flag_ml_var = var;
flag_name = name; flag_shortdesc = shortdesc;
flag_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " %s := Some (Password.password_crypto_of_string s)\n" var;
pr " ),\n";
- pr " \"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
| { flag_type = FlagSMCredentials v; flag_ml_var = var;
flag_name = name; flag_shortdesc = shortdesc;
flag_pod_longdesc = longdesc } ->
pr " (\n";
- pr " \"--%s\",\n" name;
- pr " Arg.String (\n";
+ pr " [ \"--%s\" ],\n" name;
+ pr " Getopt.String (\n";
+ pr " s_\"%s\",\n" v;
pr " fun s ->\n";
pr " %s := Some (Subscription_manager.parse_credentials_selector s)\n"
var;
pr " ),\n";
- pr " \"%s\" ^ \" \" ^ s_\"%s\"\n" v shortdesc;
+ pr " s_\"%s\"\n" shortdesc;
pr " ),\n";
pr " Some %S, %S;\n" v longdesc
) flags;
@@ -844,13 +854,13 @@ pr " ] in
fun (cmd, arg) ->
try
let ((_, spec, _), _, _) = List.find (
- fun ((key, _, _), _, _) ->
- key = \"--\" ^ cmd
+ fun ((keys, _, _), _, _) ->
+ List.mem (\"--\" ^ cmd) keys
) argspec in
(match spec with
- | Arg.Unit fn -> fn ()
- | Arg.String fn -> fn arg
- | Arg.Set varref -> varref := true
+ | Getopt.Unit fn -> fn ()
+ | Getopt.String (_, fn) -> fn arg
+ | Getopt.Set varref -> varref := true
| _ -> error \"INTERNAL error: spec not handled for %%s\" cmd
)
with Not_found ->
diff --git a/get-kernel/Makefile.am b/get-kernel/Makefile.am
index 6892fbb..c20de07 100644
--- a/get-kernel/Makefile.am
+++ b/get-kernel/Makefile.am
@@ -28,6 +28,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/uri-c.c \
../fish/uri.c
@@ -59,6 +60,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/URI.cmo \
$(SOURCES_ML:.ml=.cmo)
diff --git a/get-kernel/get_kernel.ml b/get-kernel/get_kernel.ml
index fed9faf..a9c1187 100644
--- a/get-kernel/get_kernel.ml
+++ b/get-kernel/get_kernel.ml
@@ -50,24 +50,18 @@ let parse_cmdline () =
error (f_"--prefix option can only be given once");
prefix := Some p in
- let ditto = " -\"-" in
let argspec = [
- "-a", Arg.String set_file, s_"file" ^ " " ^ s_"Add disk image file";
- "--add", Arg.String set_file, s_"file" ^ " " ^ s_"Add disk image file";
- "-c", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "--connect", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "-d", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "--domain", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "--format", Arg.Set_string format, s_"format" ^ " " ^ s_"Format of input disk";
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-o", Arg.Set_string output, s_"directory" ^ " " ^ s_"Output directory";
- "--output", Arg.Set_string output, ditto;
- "--unversioned-names", Arg.Set unversioned,
- " " ^ s_"Use unversioned names for files";
- "--prefix", Arg.String set_prefix, "prefix" ^ " " ^ s_"Prefix for files";
+ [ "-a"; "--add" ], Getopt.String (s_"file", set_file), s_"Add disk image file";
+ [ "-c"; "--connect" ], Getopt.Set_string (s_"uri", libvirturi), s_"Set libvirt URI";
+ [ "-d"; "--domain" ], Getopt.String (s_"domain", set_domain), s_"Set libvirt guest name";
+ [ "--format" ], Getopt.Set_string (s_"format", format), s_"Format of input disk";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-o"; "--output" ], Getopt.Set_string (s_"directory", output), s_"Output directory";
+ [ "--unversioned-names" ], Getopt.Set unversioned,
+ s_"Use unversioned names for files";
+ [ "--prefix" ], Getopt.String (s_"prefix", set_prefix), s_"Prefix for files";
] in
let argspec = set_standard_options argspec in
- let anon_fun _ = raise (Arg.Bad (s_"extra parameter on the command line")) in
let usage_msg =
sprintf (f_"\
%s: extract kernel and ramdisk from a guest
@@ -76,7 +70,7 @@ A short summary of the options is given below. For detailed help please
read the man page virt-get-kernel(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ Getopt.parse argspec usage_msg;
(* Machine-readable mode? Print out some facts about what
* this binary supports.
diff --git a/mllib/Makefile.am b/mllib/Makefile.am
index e728d54..b0cea5f 100644
--- a/mllib/Makefile.am
+++ b/mllib/Makefile.am
@@ -31,6 +31,7 @@ SOURCES_MLI = \
curl.mli \
dev_t.mli \
fsync.mli \
+ getopt.mli \
JSON.mli \
mkdtemp.mli \
planner.mli \
@@ -44,6 +45,7 @@ SOURCES_ML = \
$(OCAML_BYTES_COMPAT_ML) \
libdir.ml \
common_gettext.ml \
+ getopt.ml \
dev_t.ml \
common_utils.ml \
fsync.ml \
@@ -61,6 +63,7 @@ SOURCES_C = \
../fish/uri.c \
dev_t-c.c \
fsync-c.c \
+ getopt-c.c \
mkdtemp-c.c \
progress-c.c \
statvfs-c.c \
diff --git a/mllib/common_utils.ml b/mllib/common_utils.ml
index 69118da..44efe07 100644
--- a/mllib/common_utils.ml
+++ b/mllib/common_utils.ml
@@ -582,20 +582,26 @@ let compare_command_line_args a b =
compare (String.lowercase (skip_dashes a)) (String.lowercase (skip_dashes b))
(* Implement `--short-options' and `--long-options'. *)
-let long_options = ref ([] : (Arg.key * Arg.spec * Arg.doc) list)
+let long_options = ref ([] : (Getopt.keys * Getopt.spec * Getopt.doc) list)
let display_short_options () =
List.iter (
- fun (arg, _, _) ->
- if String.is_prefix arg "-" && not (String.is_prefix arg "--") then
- printf "%s\n" arg
+ fun (args, _, _) ->
+ List.iter (
+ fun arg ->
+ if String.is_prefix arg "-" && not (String.is_prefix arg "--") then
+ printf "%s\n" arg
+ ) args
) !long_options;
exit 0
let display_long_options () =
List.iter (
- fun (arg, _, _) ->
- if String.is_prefix arg "--" && arg <> "--long-options" &&
- arg <> "--short-options" then
- printf "%s\n" arg
+ fun (args, _, _) ->
+ List.iter (
+ fun arg ->
+ if String.is_prefix arg "--" && arg <> "--long-options" &&
+ arg <> "--short-options" then
+ printf "%s\n" arg
+ ) args
) !long_options;
exit 0
@@ -604,27 +610,23 @@ let set_standard_options argspec =
let set_debug_gc () =
at_exit (fun () -> Gc.compact()) in
let argspec = [
- "--short-options", Arg.Unit display_short_options, " " ^ s_"List short options (internal)";
- "--long-options", Arg.Unit display_long_options, " " ^ s_"List long options (internal)";
- "-V", Arg.Unit print_version_and_exit,
- " " ^ s_"Display version and exit";
- "--version", Arg.Unit print_version_and_exit,
- " " ^ s_"Display version and exit";
- "-v", Arg.Unit set_verbose, " " ^ s_"Enable libguestfs debugging messages";
- "--verbose", Arg.Unit set_verbose, " " ^ s_"Enable libguestfs debugging messages";
- "-x", Arg.Unit set_trace, " " ^ s_"Enable tracing of libguestfs calls";
- "--debug-gc", Arg.Unit set_debug_gc, " " ^ s_"Debug GC and memory allocations (internal)";
- "-q", Arg.Unit set_quiet, " " ^ s_"Don't print progress messages";
- "--quiet", Arg.Unit set_quiet, " " ^ s_"Don't print progress messages";
- "--color", Arg.Unit set_colours, " " ^ s_"Use ANSI colour sequences even if not tty";
- "--colors", Arg.Unit set_colours, " " ^ s_"Use ANSI colour sequences even if not tty";
- "--colour", Arg.Unit set_colours, " " ^ s_"Use ANSI colour sequences even if not tty";
- "--colours", Arg.Unit set_colours, " " ^ s_"Use ANSI colour sequences even if not tty";
+ [ "--short-options" ], Getopt.Unit display_short_options, s_"List short options (internal)";
+ [ "--long-options" ], Getopt.Unit display_long_options, s_"List long options (internal)";
+ [ "-V"; "--version" ], Getopt.Unit print_version_and_exit, s_"Display version and exit";
+ [ "-v"; "--verbose" ], Getopt.Unit set_verbose, s_"Enable libguestfs debugging messages";
+ [ "-x" ], Getopt.Unit set_trace, s_"Enable tracing of libguestfs calls";
+ [ "--debug-gc" ], Getopt.Unit set_debug_gc, s_"Debug GC and memory allocations (internal)";
+ [ "-q"; "--quiet" ], Getopt.Unit set_quiet, s_"Don't print progress messages";
+ [ "--color"; "--colors"; "--colour"; "--colours" ], Getopt.Unit set_colours, s_"Use ANSI colour sequences even if not tty";
] @ argspec in
+ let argspec = List.map (
+ fun (keys, action, doc) ->
+ List.hd (List.sort compare_command_line_args keys), (keys, action, doc)
+ ) argspec in
let argspec =
- let cmp (arg1, _, _) (arg2, _, _) = compare_command_line_args arg1 arg2 in
+ let cmp (arg1, _) (arg2, _) = compare_command_line_args arg1 arg2 in
List.sort cmp argspec in
- let argspec = Arg.align argspec in
+ let argspec = List.map snd argspec in
long_options := argspec;
argspec
diff --git a/mllib/common_utils.mli b/mllib/common_utils.mli
index 9b1086c..6aaaf23 100644
--- a/mllib/common_utils.mli
+++ b/mllib/common_utils.mli
@@ -260,7 +260,7 @@ val skip_dashes : string -> string
val compare_command_line_args : string -> string -> int
(** Compare command line arguments for equality, ignoring any leading [-]s. *)
-val set_standard_options : (Arg.key * Arg.spec * Arg.doc) list -> (Arg.key * Arg.spec * Arg.doc) list
+val set_standard_options : (Getopt.keys * Getopt.spec * Getopt.doc) list -> (Getopt.keys * Getopt.spec * Getopt.doc) list
(** Adds the standard libguestfs command line options to the specified ones,
sorting them, and setting [long_options] to them.
diff --git a/mllib/getopt-c.c b/mllib/getopt-c.c
new file mode 100644
index 0000000..e5e832c
--- /dev/null
+++ b/mllib/getopt-c.c
@@ -0,0 +1,424 @@
+/* argument parsing using getopt(3)
+ * Copyright (C) 2016 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <getopt.h>
+#include <stdbool.h>
+#include <libintl.h>
+#include <errno.h>
+#include <error.h>
+#include <assert.h>
+
+#include <caml/alloc.h>
+#include <caml/fail.h>
+#include <caml/memory.h>
+#include <caml/mlvalues.h>
+#include <caml/callback.h>
+#include <caml/printexc.h>
+
+#include <guestfs.h>
+#include "guestfs-internal-frontend.h"
+
+extern value guestfs_int_mllib_getopt_parse (value argsv, value specsv, value anon_funv, value usage_msgv);
+
+#define Val_none Val_int(0)
+
+#ifdef HAVE_ATTRIBUTE_CLEANUP
+#define CLEANUP_FREE_OPTION_LIST __attribute__((cleanup(cleanup_option_list)))
+
+static void
+cleanup_option_list (void *ptr)
+{
+ struct option *opts = * (struct option **) ptr;
+ struct option *p = opts;
+
+ while (p->name != NULL) {
+ /* Cast the constness away, since we created the names on heap. */
+ free ((char *) p->name);
+ ++p;
+ }
+ free (opts);
+}
+
+#else
+#define CLEANUP_FREE_OPTION_LIST
+#endif
+
+static void
+xwrite (int fd, const void *v_buf, size_t len)
+{
+ int r;
+ const char *buf = v_buf;
+
+ while (len > 0) {
+ r = write (fd, buf, len);
+ if (r == -1)
+ error (EXIT_FAILURE, errno, "write");
+ buf += r;
+ len -= r;
+ }
+}
+
+static void
+show_help (value specsv, value usage_msgv)
+{
+ CAMLparam2 (specsv, usage_msgv);
+ CAMLlocal4 (specv, keysv, actionv, docv);
+ FILE *f;
+ CLEANUP_FREE char *buf = NULL;
+ size_t buf_len = 0;
+ size_t i, specs_len;
+
+ f = open_memstream (&buf, &buf_len);
+ if (f == NULL)
+ error (EXIT_FAILURE, errno, "open_memstream");
+
+ fprintf (f, _("%s\n"
+ "Options:\n"),
+ String_val (usage_msgv));
+
+ specs_len = Wosize_val (specsv);
+
+ static const int column_wrap = 38;
+
+ for (i = 0; i < specs_len; ++i) {
+ size_t len, j;
+ const char *param = NULL;
+ int columns = 0;
+
+ specv = Field (specsv, i);
+ keysv = Field (specv, 0);
+ actionv = Field (specv, 1);
+ docv = Field (specv, 2);
+ len = Wosize_val (keysv);
+
+ if (len == 0)
+ continue;
+
+ switch (Tag_val (actionv)) {
+ case 0: /* Unit of (unit -> unit) */
+ case 1: /* Set of bool ref */
+ case 2: /* Clear of bool ref */
+ break;
+
+ case 3: /* String of string * (string -> unit) */
+ case 4: /* Set_string of string * string ref */
+ case 5: /* Int of string * (int -> unit) */
+ case 6: /* Set_int of string * int ref */
+ param = String_val (Field (actionv, 0));
+ break;
+
+ default:
+ error (EXIT_FAILURE, 0,
+ "internal error: unhandled Tag_val (actionv) = %d",
+ Tag_val (actionv));
+ }
+
+ columns += fprintf (f, " ");
+
+ for (j = 0; j < len; ++j) {
+ const char *key = String_val (Field (keysv, j));
+
+ if (j > 0)
+ columns += fprintf (f, ", ");
+ columns += fprintf (f, "%s", key);
+ }
+
+ if (param != NULL)
+ columns += fprintf (f, " <%s>", param);
+
+ if (columns >= column_wrap)
+ fprintf (f, "\n%*c", column_wrap, ' ');
+ else
+ fprintf (f, "%*c", column_wrap - columns, ' ');
+
+ fprintf (f, "%s\n", String_val (docv));
+ }
+
+ /* Close the FILE to update the buffer. */
+ fclose (f);
+ xwrite (STDOUT_FILENO, buf, buf_len);
+
+ exit (EXIT_SUCCESS);
+
+ CAMLreturn0;
+}
+
+static void __attribute__((noreturn))
+show_error (int status)
+{
+ fprintf (stderr, _("Try `%s --help' for more information.\n"),
+ guestfs_int_program_name);
+ exit (status);
+}
+
+static int
+find_spec (value specsv, int specs_len, char opt)
+{
+ CAMLparam1 (specsv);
+ CAMLlocal1 (keysv);
+ int i, ret;
+
+ for (i = 0; i < specs_len; ++i) {
+ int len, j;
+
+ keysv = Field (Field (specsv, i), 0);
+ len = Wosize_val (keysv);
+
+ for (j = 0; j < len; ++j) {
+ const char *key = String_val (Field (keysv, j));
+
+ if (key[0] == '-' && key[1] == opt) {
+ ret = i;
+ goto done;
+ }
+ }
+ }
+
+ ret = -1;
+
+ done:
+ CAMLreturnT (int, ret);
+}
+
+static void
+do_call1 (value funv, value paramv)
+{
+ CAMLparam2 (funv, paramv);
+ CAMLlocal1 (rv);
+
+ rv = caml_callback_exn (funv, paramv);
+
+ if (Is_exception_result (rv))
+ fprintf (stderr,
+ "libguestfs: uncaught OCaml exception in getopt callback: %s",
+ caml_format_exception (Extract_exception (rv)));
+
+ CAMLreturn0;
+}
+
+value
+guestfs_int_mllib_getopt_parse (value argsv, value specsv, value anon_funv, value usage_msgv)
+{
+ CAMLparam4 (argsv, specsv, anon_funv, usage_msgv);
+ CAMLlocal5 (specv, keysv, actionv, v, v2);
+ size_t argc;
+ CLEANUP_FREE_STRING_LIST char **argv = NULL;
+ size_t specs_len, i;
+ CLEANUP_FREE char *optstring = NULL;
+ int optstring_len = 0;
+ CLEANUP_FREE_OPTION_LIST struct option *longopts = NULL;
+ int longopts_len = 0;
+ int c;
+ int specv_index;
+
+ argc = Wosize_val (argsv);
+ argv = malloc (sizeof (char *) * (argc + 1));
+ if (argv == NULL)
+ caml_raise_out_of_memory ();
+ for (i = 0; i < argc; ++i) {
+ argv[i] = strdup (String_val (Field (argsv, i)));
+ if (argv[i] == NULL)
+ caml_raise_out_of_memory ();
+ }
+ argv[argc] = NULL;
+
+ specs_len = Wosize_val (specsv);
+
+ optstring = malloc (1);
+ if (optstring == NULL)
+ caml_raise_out_of_memory ();
+ longopts = malloc (sizeof (*longopts));
+ if (longopts == NULL)
+ caml_raise_out_of_memory ();
+
+ for (i = 0; i < specs_len; ++i) {
+ size_t len, j;
+
+ specv = Field (specsv, i);
+ keysv = Field (specv, 0);
+ actionv = Field (specv, 1);
+ len = Wosize_val (keysv);
+
+ assert (len != 0);
+
+ for (j = 0; j < len; ++j) {
+ const char *key = String_val (Field (keysv, j));
+ size_t key_len = strlen (key);
+ int has_arg = 0;
+
+ /* We assume that the key is valid, with the checks done in the
+ * OCaml Getopt.parse_argv. */
+ ++key;
+ if (key[0] == '-')
+ ++key;
+
+ switch (Tag_val (actionv)) {
+ case 0: /* Unit of (unit -> unit) */
+ case 1: /* Set of bool ref */
+ case 2: /* Clear of bool ref */
+ has_arg = 0;
+ break;
+
+ case 3: /* String of string * (string -> unit) */
+ case 4: /* Set_string of string * string ref */
+ case 5: /* Int of string * (int -> unit) */
+ case 6: /* Set_int of string * int ref */
+ has_arg = 1;
+ break;
+
+ default:
+ error (EXIT_FAILURE, 0,
+ "internal error: unhandled Tag_val (actionv) = %d",
+ Tag_val (actionv));
+ }
+
+ if (key_len == 2) { /* Single letter short option. */
+ char *newstring = realloc (optstring, optstring_len + 1 + has_arg + 1);
+ if (newstring == NULL)
+ caml_raise_out_of_memory ();
+ optstring = newstring;
+ optstring[optstring_len++] = key[0];
+ if (has_arg)
+ optstring[optstring_len++] = ':';
+ } else {
+ struct option *newopts = realloc (longopts, (longopts_len + 1 + 1) * sizeof (*longopts));
+ if (newopts == NULL)
+ caml_raise_out_of_memory ();
+ longopts = newopts;
+ longopts[longopts_len].name = strdup (key);
+ if (longopts[longopts_len].name == NULL)
+ caml_raise_out_of_memory ();
+ longopts[longopts_len].has_arg = has_arg;
+ longopts[longopts_len].flag = &specv_index;
+ longopts[longopts_len].val = i;
+ ++longopts_len;
+ }
+ }
+ }
+
+ /* Zero entries at the end. */
+ optstring[optstring_len] = 0;
+ longopts[longopts_len].name = NULL;
+ longopts[longopts_len].has_arg = 0;
+ longopts[longopts_len].flag = NULL;
+ longopts[longopts_len].val = 0;
+
+ for (;;) {
+ int option_index = -1;
+ c = getopt_long_only (argc, argv, optstring, longopts, &option_index);
+ if (c == -1) break;
+
+ switch (c) {
+ case '?':
+ show_error (EXIT_FAILURE);
+ break;
+
+ case 0:
+ if (STREQ (longopts[option_index].name, "help")) {
+ show_help (specsv, usage_msgv);
+ }
+ /* specv_index set already -- nothing to do. */
+ break;
+
+ case 'h':
+ show_help (specsv, usage_msgv);
+ break;
+
+ default:
+ specv_index = find_spec (specsv, specs_len, c);
+ break;
+ }
+
+ specv = Field (specsv, specv_index);
+ actionv = Field (specv, 1);
+
+ switch (Tag_val (actionv)) {
+ int num;
+
+ case 0: /* Unit of (unit -> unit) */
+ v = Field (actionv, 0);
+ do_call1 (v, Val_unit);
+ break;
+
+ case 1: /* Set of bool ref */
+ caml_modify (&Field (Field (actionv, 0), 0), Val_true);
+ break;
+
+ case 2: /* Clear of bool ref */
+ caml_modify (&Field (Field (actionv, 0), 0), Val_false);
+ break;
+
+ case 3: /* String of string * (string -> unit) */
+ v = Field (actionv, 1);
+ v2 = caml_copy_string (optarg);
+ do_call1 (v, v2);
+ break;
+
+ case 4: /* Set_string of string * string ref */
+ v = caml_copy_string (optarg);
+ caml_modify (&Field (Field (actionv, 1), 0), v);
+ break;
+
+ case 5: /* Int of string * (int -> unit) */
+ if (sscanf (optarg, "%d", &num) != 1) {
+ fprintf (stderr, _("'%s' is not a numeric value.\n"),
+ guestfs_int_program_name);
+ show_error (EXIT_FAILURE);
+ }
+ v = Field (actionv, 1);
+ do_call1 (v, Val_int (num));
+ break;
+
+ case 6: /* Set_int of string * int ref */
+ if (sscanf (optarg, "%d", &num) != 1) {
+ fprintf (stderr, _("'%s' is not a numeric value.\n"),
+ guestfs_int_program_name);
+ show_error (EXIT_FAILURE);
+ }
+ caml_modify (&Field (Field (actionv, 1), 0), Val_int (num));
+ break;
+
+ default:
+ error (EXIT_FAILURE, 0,
+ "internal error: unhandled Tag_val (actionv) = %d",
+ Tag_val (actionv));
+ }
+ }
+
+ if (optind < (int) argc) {
+ if (anon_funv == Val_none) {
+ fprintf (stderr, _("Extra parameter on the command line: '%s'.\n"),
+ argv[optind]);
+ show_error (EXIT_FAILURE);
+ }
+ v = Field (anon_funv, 0);
+ while (optind < (int) argc) {
+ v2 = caml_copy_string (argv[optind++]);
+ do_call1 (v, v2);
+ }
+ }
+
+ CAMLreturn (Val_unit);
+}
diff --git a/mllib/getopt.ml b/mllib/getopt.ml
new file mode 100644
index 0000000..829cb50
--- /dev/null
+++ b/mllib/getopt.ml
@@ -0,0 +1,67 @@
+(* Common utilities for OCaml tools in libguestfs.
+ * Copyright (C) 2016 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *)
+
+open Common_gettext.Gettext
+
+open Printf
+
+type spec =
+ | Unit of (unit -> unit)
+ | Set of bool ref
+ | Clear of bool ref
+ | String of string * (string -> unit)
+ | Set_string of string * string ref
+ | Int of string * (int -> unit)
+ | Set_int of string * int ref
+
+type keys = string list
+type doc = string
+type usage_msg = string
+type anon_fun = (string -> unit)
+type c_keys = string array
+
+external getopt_parse : string array -> (c_keys * spec * doc) array -> ?anon_fun:anon_fun -> usage_msg -> unit = "guestfs_int_mllib_getopt_parse"
+
+let parse_argv argv specs ?anon_fun usage_msg =
+ (* Sanity check the input *)
+ let validate_key key =
+ if String.length key == 0 || key == "-" || key == "--"
+ || key.[0] != '-' then
+ raise (Invalid_argument (sprintf "invalid option key: '%s'" key))
+ in
+
+ List.iter (
+ fun (keys, spec, doc) ->
+ if keys == [] then
+ raise (Invalid_argument "empty keys for Getopt spec");
+ List.iter validate_key keys;
+ ) specs;
+
+ let specs = specs @ [
+ (* Handled internally by getopt_parse. *)
+ [ "-h"; "-help"; "--help" ], Unit (fun () -> ()), s_"Display brief help";
+ ] in
+ let specs = List.map (
+ fun (keys, spec, doc) ->
+ Array.of_list keys, spec, doc
+ ) specs in
+ let specs = Array.of_list specs in
+ getopt_parse argv specs ?anon_fun usage_msg
+
+let parse =
+ parse_argv Sys.argv
diff --git a/mllib/getopt.mli b/mllib/getopt.mli
new file mode 100644
index 0000000..a100f1d
--- /dev/null
+++ b/mllib/getopt.mli
@@ -0,0 +1,73 @@
+(* Common utilities for OCaml tools in libguestfs.
+ * Copyright (C) 2016 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *)
+
+type spec =
+ | Unit of (unit -> unit)
+ (* Simple option with no argument; call the function. *)
+ | Set of bool ref
+ (* Simple option with no argument; set the reference to true. *)
+ | Clear of bool ref
+ (* Simple option with no argument; set the reference to false. *)
+ | String of string * (string -> unit)
+ (* Option requiring an argument; the first element in the tuple
+ is the documentation string of the argument, and the second
+ is the function to call. *)
+ | Set_string of string * string ref
+ (* Option requiring an argument; the first element in the tuple
+ is the documentation string of the argument, and the second
+ is the reference to be set. *)
+ | Int of string * (int -> unit)
+ (* Option requiring an integer value as argument; the first
+ element in the tuple is the documentation string of the
+ argument, and the second is the function to call. *)
+ | Set_int of string * int ref
+ (* Option requiring an integer value as argument; the first
+ element in the tuple is the documentation string of the
+ argument, and the second is the reference to be set. *)
+
+type keys = string list
+type doc = string
+type usage_msg = string
+type anon_fun = (string -> unit)
+
+val parse_argv : string array ->
+ (keys * spec * doc) list -> ?anon_fun:anon_fun -> usage_msg -> unit
+(** [Getopt.parse args speclist ?anon_fun usage_msg] parses the
+ specified arguments.
+
+ [args] is the array with command line arguments, with the first
+ element representing the application name/path.
+
+ [speclist] is a list of triples [(keys, spec, doc)]: [keys] is a
+ list of options, [spec] is the associated action, and [doc] is
+ the help text.
+
+ [anon_fun] is an optional function to handle non-option arguments;
+ not specifying one means that only options are allowed, and
+ non-options will cause an error.
+
+ [usage_msg] is the string which is printed before the list of
+ options as help text.
+
+ In case of errors, like non-integer value for [Int] or [Set_int],
+ an error message is printed, together with a pointer to use
+ [--help], and then the program exists. *)
+
+val parse :
+ (keys * spec * doc) list -> ?anon_fun:anon_fun -> usage_msg -> unit
+(** Call {!Getopt.parse_argv} on [Sys.argv]. *)
diff --git a/resize/Makefile.am b/resize/Makefile.am
index da5d42d..5fb311a 100644
--- a/resize/Makefile.am
+++ b/resize/Makefile.am
@@ -32,6 +32,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
../mllib/fsync-c.c \
+ ../mllib/getopt-c.c \
../fish/progress.c \
../mllib/progress-c.c \
../fish/uri.c \
@@ -61,6 +62,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(SOURCES_ML:.ml=.cmo)
XOBJECTS = $(BOBJECTS:.cmo=.cmx)
diff --git a/resize/resize.ml b/resize/resize.ml
index f92f1b7..566076b 100644
--- a/resize/resize.ml
+++ b/resize/resize.ml
@@ -182,35 +182,28 @@ let main () =
let sparse = ref true in
let unknown_fs_mode = ref "warn" in
- let ditto = " -\"-" in
let argspec = [
- "--align-first", Arg.Set_string align_first, s_"never|always|auto" ^ " " ^ s_"Align first partition (default: auto)";
- "--alignment", Arg.Set_int alignment, s_"sectors" ^ " " ^ s_"Set partition alignment (default: 128 sectors)";
- "--no-copy-boot-loader", Arg.Clear copy_boot_loader, " " ^ s_"Don't copy boot loader";
- "-d", Arg.Unit set_verbose, " " ^ s_"Enable debugging messages";
- "--debug", Arg.Unit set_verbose, ditto;
- "--delete", Arg.String (add deletes), s_"part" ^ " " ^ s_"Delete partition";
- "--expand", Arg.String set_expand, s_"part" ^ " " ^ s_"Expand partition";
- "--no-expand-content", Arg.Clear expand_content, " " ^ s_"Don't expand content";
- "--no-extra-partition", Arg.Clear extra_partition, " " ^ s_"Don't create extra partition";
- "--format", Arg.Set_string format, s_"format" ^ " " ^ s_"Format of input disk";
- "--ignore", Arg.String (add ignores), s_"part" ^ " " ^ s_"Ignore partition";
- "--lv-expand", Arg.String (add lv_expands), s_"lv" ^ " " ^ s_"Expand logical volume";
- "--LV-expand", Arg.String (add lv_expands), s_"lv" ^ ditto;
- "--lvexpand", Arg.String (add lv_expands), s_"lv" ^ ditto;
- "--LVexpand", Arg.String (add lv_expands), s_"lv" ^ ditto;
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-n", Arg.Set dryrun, " " ^ s_"Don't perform changes";
- "--dry-run", Arg.Set dryrun, " " ^ s_"Don't perform changes";
- "--dryrun", Arg.Set dryrun, ditto;
- "--ntfsresize-force", Arg.Set ntfsresize_force, " " ^ s_"Force ntfsresize";
- "--output-format", Arg.Set_string output_format, s_"format" ^ " " ^ s_"Format of output disk";
- "--resize", Arg.String (add resizes), s_"part=size" ^ " " ^ s_"Resize partition";
- "--resize-force", Arg.String (add resizes_force), s_"part=size" ^ " " ^ s_"Forcefully resize partition";
- "--shrink", Arg.String set_shrink, s_"part" ^ " " ^ s_"Shrink partition";
- "--no-sparse", Arg.Clear sparse, " " ^ s_"Turn off sparse copying";
- "--unknown-filesystems", Arg.Set_string unknown_fs_mode,
- s_"ignore|warn|error" ^ " " ^ s_"Behaviour on expand unknown filesystems (default: warn)";
+ [ "--align-first" ], Getopt.Set_string (s_"never|always|auto", align_first), s_"Align first partition (default: auto)";
+ [ "--alignment" ], Getopt.Set_int (s_"sectors", alignment), s_"Set partition alignment (default: 128 sectors)";
+ [ "--no-copy-boot-loader" ], Getopt.Clear copy_boot_loader, s_"Don't copy boot loader";
+ [ "-d"; "--debug" ], Getopt.Unit set_verbose, s_"Enable debugging messages";
+ [ "--delete" ], Getopt.String (s_"part", add deletes), s_"Delete partition";
+ [ "--expand" ], Getopt.String (s_"part", set_expand), s_"Expand partition";
+ [ "--no-expand-content" ], Getopt.Clear expand_content, s_"Don't expand content";
+ [ "--no-extra-partition" ], Getopt.Clear extra_partition, s_"Don't create extra partition";
+ [ "--format" ], Getopt.Set_string (s_"format", format), s_"Format of input disk";
+ [ "--ignore" ], Getopt.String (s_"part", add ignores), s_"Ignore partition";
+ [ "--lv-expand"; "--LV-expand"; "--lvexpand"; "--LVexpand" ], Getopt.String (s_"lv", add lv_expands), s_"Expand logical volume";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-n"; "--dry-run"; "--dryrun" ], Getopt.Set dryrun, s_"Don't perform changes";
+ [ "--ntfsresize-force" ], Getopt.Set ntfsresize_force, s_"Force ntfsresize";
+ [ "--output-format" ], Getopt.Set_string (s_"format", output_format), s_"Format of output disk";
+ [ "--resize" ], Getopt.String (s_"part=size", add resizes), s_"Resize partition";
+ [ "--resize-force" ], Getopt.String (s_"part=size", add resizes_force), s_"Forcefully resize partition";
+ [ "--shrink" ], Getopt.String (s_"part", set_shrink), s_"Shrink partition";
+ [ "--no-sparse" ], Getopt.Clear sparse, s_"Turn off sparse copying";
+ [ "--unknown-filesystems" ], Getopt.Set_string (s_"ignore|warn|error", unknown_fs_mode),
+ s_"Behaviour on expand unknown filesystems (default: warn)";
] in
let argspec = set_standard_options argspec in
let disks = ref [] in
@@ -223,7 +216,7 @@ A short summary of the options is given below. For detailed help please
read the man page virt-resize(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ Getopt.parse argspec ~anon_fun usage_msg;
if verbose () then (
printf "command line:";
diff --git a/sparsify/Makefile.am b/sparsify/Makefile.am
index f9f0f8e..467790c 100644
--- a/sparsify/Makefile.am
+++ b/sparsify/Makefile.am
@@ -38,6 +38,7 @@ SOURCES_ML = \
SOURCES_C = \
../fish/progress.c \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/progress-c.c \
../mllib/statvfs-c.c
@@ -60,6 +61,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/progress.cmo \
$(top_builddir)/mllib/StatVFS.cmo \
@@ -72,6 +74,7 @@ XOBJECTS = $(BOBJECTS:.cmo=.cmx)
OCAMLPACKAGES = \
-package str,unix \
-I $(top_builddir)/src/.libs \
+ -I $(top_builddir)/gnulib/lib/.libs \
-I $(top_builddir)/ocaml \
-I $(top_builddir)/mllib
if HAVE_OCAML_PKG_GETTEXT
@@ -79,7 +82,11 @@ OCAMLPACKAGES += -package gettext-stub
endif
OCAMLCLIBS = \
- $(LIBTINFO_LIBS)
+ -lutils \
+ $(LIBTINFO_LIBS) \
+ $(LIBXML2_LIBS) \
+ $(LIBINTL) \
+ -lgnu
OCAMLFLAGS = $(OCAML_FLAGS) $(OCAML_WARN_ERROR)
diff --git a/sparsify/cmdline.ml b/sparsify/cmdline.ml
index 0c12f8e..0dc2c9a 100644
--- a/sparsify/cmdline.ml
+++ b/sparsify/cmdline.ml
@@ -63,19 +63,17 @@ let parse_cmdline () =
let tmp = ref "" in
let zeroes = ref [] in
- let ditto = " -\"-" in
let argspec = [
- "--check-tmpdir", Arg.String set_check_tmpdir, "ignore|..." ^ " " ^ s_"Check there is enough space in $TMPDIR";
- "--compress", Arg.Set compress, " " ^ s_"Compressed output format";
- "--convert", Arg.Set_string convert, s_"format" ^ " " ^ s_"Format of output disk (default: same as input)";
- "--format", Arg.Set_string format, s_"format" ^ " " ^ s_"Format of input disk";
- "--ignore", Arg.String (add ignores), s_"fs" ^ " " ^ s_"Ignore filesystem";
- "--in-place", Arg.Set in_place, " " ^ s_"Modify the disk image in-place";
- "--inplace", Arg.Set in_place, ditto;
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-o", Arg.Set_string option, s_"option" ^ " " ^ s_"Add qemu-img options";
- "--tmp", Arg.Set_string tmp, s_"block|dir|prebuilt:file" ^ " " ^ s_"Set temporary block device, directory or prebuilt file";
- "--zero", Arg.String (add zeroes), s_"fs" ^ " " ^ s_"Zero filesystem";
+ [ "--check-tmpdir" ], Getopt.String ("ignore|...", set_check_tmpdir), s_"Check there is enough space in $TMPDIR";
+ [ "--compress" ], Getopt.Set compress, s_"Compressed output format";
+ [ "--convert" ], Getopt.Set_string (s_"format", convert), s_"Format of output disk (default: same as input)";
+ [ "--format" ], Getopt.Set_string (s_"format", format), s_"Format of input disk";
+ [ "--ignore" ], Getopt.String (s_"fs", add ignores), s_"Ignore filesystem";
+ [ "--in-place"; "--inplace" ], Getopt.Set in_place, s_"Modify the disk image in-place";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-o" ], Getopt.Set_string (s_"option", option), s_"Add qemu-img options";
+ [ "--tmp" ], Getopt.Set_string (s_"block|dir|prebuilt:file", tmp), s_"Set temporary block device, directory or prebuilt file";
+ [ "--zero" ], Getopt.String (s_"fs", add zeroes), s_"Zero filesystem";
] in
let argspec = set_standard_options argspec in
let disks = ref [] in
@@ -92,7 +90,7 @@ A short summary of the options is given below. For detailed help please
read the man page virt-sparsify(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ Getopt.parse argspec ~anon_fun usage_msg;
(* Dereference the rest of the args. *)
let check_tmpdir = !check_tmpdir in
diff --git a/sysprep/Makefile.am b/sysprep/Makefile.am
index d4f1173..d69786e 100644
--- a/sysprep/Makefile.am
+++ b/sysprep/Makefile.am
@@ -81,6 +81,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/uri-c.c \
../mllib/mkdtemp-c.c \
../customize/crypt-c.c \
@@ -109,6 +110,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/URI.cmo \
$(top_builddir)/mllib/mkdtemp.cmo \
diff --git a/sysprep/main.ml b/sysprep/main.ml
index 7922b43..c6360ae 100644
--- a/sysprep/main.ml
+++ b/sysprep/main.ml
@@ -117,31 +117,24 @@ let main () =
in
let basic_args = [
- "-a", Arg.String add_file, s_"file" ^ " " ^ s_"Add disk image file";
- "--add", Arg.String add_file, s_"file" ^ " " ^ s_"Add disk image file";
- "-c", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "--connect", Arg.Set_string libvirturi, s_"uri" ^ " " ^ s_"Set libvirt URI";
- "-d", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "--domain", Arg.String set_domain, s_"domain" ^ " " ^ s_"Set libvirt guest name";
- "-n", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dryrun", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dry-run", Arg.Set dryrun, " " ^ s_"Perform a dry run";
- "--dump-pod", Arg.Unit dump_pod, " " ^ s_"Dump POD (internal)";
- "--dump-pod-options", Arg.Unit dump_pod_options, " " ^ s_"Dump POD for options (internal)";
- "--enable", Arg.String set_enable, s_"operations" ^ " " ^ s_"Enable specific operations";
- "--format", Arg.String set_format, s_"format" ^ " " ^ s_"Set format (default: auto)";
- "--list-operations", Arg.Unit list_operations, " " ^ s_"List supported operations";
- "--mount-options", Arg.Set_string mount_opts, s_"opts" ^ " " ^ s_"Set mount options (eg /:noatime;/var:rw,noatime)";
- "--network", Arg.Set network, " " ^ s_"Enable appliance network";
- "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network (default)";
- "--no-selinux-relabel", Arg.Unit (fun () -> ()),
- " " ^ s_"Compatibility option, does nothing";
- "--operation", Arg.String set_operations, " " ^ s_"Enable/disable specific operations";
- "--operations", Arg.String set_operations, " " ^ s_"Enable/disable specific operations";
+ [ "-a"; "--add" ], Getopt.String (s_"file", add_file), s_"Add disk image file";
+ [ "-c"; "--connect" ], Getopt.Set_string (s_"uri", libvirturi), s_"Set libvirt URI";
+ [ "-d"; "--domain" ], Getopt.String (s_"domain", set_domain), s_"Set libvirt guest name";
+ [ "-n"; "--dryrun"; "--dry-run" ], Getopt.Set dryrun, s_"Perform a dry run";
+ [ "--dump-pod" ], Getopt.Unit dump_pod, s_"Dump POD (internal)";
+ [ "--dump-pod-options" ], Getopt.Unit dump_pod_options, s_"Dump POD for options (internal)";
+ [ "--enable" ], Getopt.String (s_"operations", set_enable), s_"Enable specific operations";
+ [ "--format" ], Getopt.String (s_"format", set_format), s_"Set format (default: auto)";
+ [ "--list-operations" ], Getopt.Unit list_operations, s_"List supported operations";
+ [ "--mount-options" ], Getopt.Set_string (s_"opts", mount_opts), s_"Set mount options (eg /:noatime;/var:rw,noatime)";
+ [ "--network" ], Getopt.Set network, s_"Enable appliance network";
+ [ "--no-network" ], Getopt.Clear network, s_"Disable appliance network (default)";
+ [ "--no-selinux-relabel" ], Getopt.Unit (fun () -> ()),
+ s_"Compatibility option, does nothing";
+ [ "--operation"; "--operations" ], Getopt.String (s_"operations", set_operations), s_"Enable/disable specific operations";
] in
let args = basic_args @ Sysprep_operation.extra_args () in
let argspec = set_standard_options args in
- let anon_fun _ = raise (Arg.Bad (s_"extra parameter on the command line")) in
let usage_msg =
sprintf (f_"\
%s: reset or unconfigure a virtual machine so clones can be made
@@ -154,7 +147,7 @@ A short summary of the options is given below. For detailed help please
read the man page virt-sysprep(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ Getopt.parse argspec usage_msg;
if not !format_consumed then
error (f_"--format parameter must appear before -a parameter");
diff --git a/sysprep/sysprep_operation.ml b/sysprep/sysprep_operation.ml
index 73020d5..c5d8e77 100644
--- a/sysprep/sysprep_operation.ml
+++ b/sysprep/sysprep_operation.ml
@@ -49,7 +49,7 @@ type operation = {
perform_on_devices : device_side_effects callback option;
}
and extra_arg = {
- extra_argspec : Arg.key * Arg.spec * Arg.doc;
+ extra_argspec : Getopt.keys * Getopt.spec * Getopt.doc;
extra_pod_argval : string option;
extra_pod_description : string;
}
@@ -208,27 +208,33 @@ let dump_pod_options () =
let args = List.map (
function
| (op_name,
- { extra_argspec = (arg_name,
- (Arg.Unit _ | Arg.Bool _ | Arg.Set _ | Arg.Clear _),
+ { extra_argspec = (arg_names,
+ (Getopt.Unit _ | Getopt.Set _ | Getopt.Clear _),
_);
extra_pod_argval = None;
extra_pod_description = pod }) ->
- let heading = sprintf "B<%s>" arg_name in
- arg_name, (op_name, heading, pod)
+ List.map (
+ fun arg_name ->
+ let heading = sprintf "B<%s>" arg_name in
+ arg_name, (op_name, heading, pod)
+ ) arg_names
| (op_name,
- { extra_argspec = (arg_name,
- (Arg.String _ | Arg.Set_string _ | Arg.Int _ |
- Arg.Set_int _ | Arg.Float _ | Arg.Set_float _),
+ { extra_argspec = (arg_names,
+ (Getopt.String _ | Getopt.Set_string _ | Getopt.Int _),
_);
extra_pod_argval = Some arg_val;
extra_pod_description = pod }) ->
- let heading = sprintf "B<%s> %s" arg_name arg_val in
- arg_name, (op_name, heading, pod)
+ List.map (
+ fun arg_name ->
+ let heading = sprintf "B<%s> %s" arg_name arg_val in
+ arg_name, (op_name, heading, pod)
+ ) arg_names
| _ ->
failwith "sysprep_operation.ml: argument type not implemented"
) args in
+ let args = List.flatten args in
let args =
List.sort (fun (a, _) (b, _) -> compare_command_line_args a b) args in
diff --git a/sysprep/sysprep_operation.mli b/sysprep/sysprep_operation.mli
index f532a8c..48b65d7 100644
--- a/sysprep/sysprep_operation.mli
+++ b/sysprep/sysprep_operation.mli
@@ -106,8 +106,8 @@ type operation = {
}
and extra_arg = {
- extra_argspec : Arg.key * Arg.spec * Arg.doc;
- (** The argspec. See OCaml [Arg] module. *)
+ extra_argspec : Getopt.keys * Getopt.spec * Getopt.doc;
+ (** The argspec. See [Getopt] module in [mllib]. *)
extra_pod_argval : string option;
(** The argument value, used only in the virt-sysprep man page. *)
@@ -126,7 +126,7 @@ val bake : unit -> unit
(** 'Bake' is called after all modules have been registered. We
finalize the list of operations, sort it, and run some checks. *)
-val extra_args : unit -> (Arg.key * Arg.spec * Arg.doc) list
+val extra_args : unit -> (Getopt.keys * Getopt.spec * Getopt.doc) list
(** Get the list of extra arguments for the command line. *)
val dump_pod : unit -> unit
diff --git a/sysprep/sysprep_operation_script.ml b/sysprep/sysprep_operation_script.ml
index 4b3748c..cc0ec9b 100644
--- a/sysprep/sysprep_operation_script.ml
+++ b/sysprep/sysprep_operation_script.ml
@@ -129,7 +129,7 @@ B<Note:> This is different from I<--firstboot> scripts (which run
in the context of the guest when it is booting first time).
I<--script> scripts run on the host, not in the guest.");
extra_args = [
- { extra_argspec = "--scriptdir", Arg.String set_scriptdir, s_"dir" ^ " " ^ s_"Mount point on host";
+ { extra_argspec = [ "--scriptdir" ], Getopt.String (s_"dir", set_scriptdir), s_"Mount point on host";
extra_pod_argval = Some "SCRIPTDIR";
extra_pod_description = s_"\
The mount point (an empty directory on the host) used when
@@ -142,7 +142,7 @@ If I<--scriptdir> is not specified then a temporary mountpoint
will be created."
};
- { extra_argspec = "--script", Arg.String add_script, s_"script" ^ " " ^ s_"Script or program to run on guest";
+ { extra_argspec = [ "--script" ], Getopt.String (s_"script", add_script), s_"Script or program to run on guest";
extra_pod_argval = Some "SCRIPT";
extra_pod_description = s_"\
Run the named C<SCRIPT> (a shell script or program) against the
diff --git a/sysprep/sysprep_operation_user_account.ml b/sysprep/sysprep_operation_user_account.ml
index e71d5ea..cf7dc57 100644
--- a/sysprep/sysprep_operation_user_account.ml
+++ b/sysprep/sysprep_operation_user_account.ml
@@ -109,7 +109,7 @@ The \"root\" account is not removed.
See the I<--remove-user-accounts> parameter for a way to specify
how to remove only some users, or to not remove some others.");
extra_args = [
- { extra_argspec = "--remove-user-accounts", Arg.String (add_users remove_users), s_"users" ^ " " ^ s_"Users to remove";
+ { extra_argspec = [ "--remove-user-accounts" ], Getopt.String (s_"users", add_users remove_users), s_"Users to remove";
extra_pod_argval = Some "USERS";
extra_pod_description = s_"\
The user accounts to be removed from the guest.
@@ -124,7 +124,7 @@ would only remove the user accounts C<bob> and C<eve>.
This option can be specified multiple times."
};
- { extra_argspec = "--keep-user-accounts", Arg.String (add_users keep_users), s_"users" ^ " " ^ s_"Users to keep";
+ { extra_argspec = [ "--keep-user-accounts" ], Getopt.String (s_"users", add_users keep_users), s_"Users to keep";
extra_pod_argval = Some "USERS";
extra_pod_description = s_"\
The user accounts to be kept in the guest.
diff --git a/v2v/Makefile.am b/v2v/Makefile.am
index fedc84d..8c6524f 100644
--- a/v2v/Makefile.am
+++ b/v2v/Makefile.am
@@ -97,6 +97,7 @@ SOURCES_ML = \
SOURCES_C = \
../mllib/dev_t-c.c \
+ ../mllib/getopt-c.c \
../mllib/mkdtemp-c.c \
../mllib/statvfs-c.c \
domainxml-c.c \
@@ -124,6 +125,7 @@ BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/regedit.cmo \
$(top_builddir)/mllib/mkdtemp.cmo \
@@ -177,6 +179,7 @@ virt_v2v_LINK = \
virt_v2v_copy_to_local_SOURCES = \
../mllib/dev_t-c.c \
../mllib/statvfs-c.c \
+ ../mllib/getopt-c.c \
domainxml-c.c \
utils-c.c \
xml-c.c
@@ -195,6 +198,7 @@ COPY_TO_LOCAL_BOBJECTS = \
$(top_builddir)/mllib/guestfs_config.cmo \
$(top_builddir)/mllib/common_gettext.cmo \
$(top_builddir)/mllib/dev_t.cmo \
+ $(top_builddir)/mllib/getopt.cmo \
$(top_builddir)/mllib/common_utils.cmo \
$(top_builddir)/mllib/JSON.cmo \
$(top_builddir)/mllib/StatVFS.cmo \
diff --git a/v2v/cmdline.ml b/v2v/cmdline.ml
index 1a729ca..1cd30d7 100644
--- a/v2v/cmdline.ml
+++ b/v2v/cmdline.ml
@@ -164,55 +164,47 @@ let parse_cmdline () =
and o_options =
String.concat "|" (Modules_list.output_modules ()) in
- let ditto = " -\"-" in
let argspec = [
- "-b", Arg.String add_bridge, "in:out " ^ s_"Map bridge 'in' to 'out'";
- "--bridge", Arg.String add_bridge, "in:out " ^ ditto;
- "--compressed", Arg.Set compressed, " " ^ s_"Compress output file";
- "--dcpath", Arg.String (set_string_option_once "--dcpath" dcpath),
- "path " ^ s_"Override dcPath (for vCenter)";
- "--dcPath", Arg.String (set_string_option_once "--dcPath" dcpath),
- "path " ^ ditto;
- "--debug-overlay",Arg.Set debug_overlays,
- " " ^ s_"Save overlay files";
- "--debug-overlays",Arg.Set debug_overlays,
- ditto;
- "-i", Arg.String set_input_mode, i_options ^ " " ^ s_"Set input mode (default: libvirt)";
- "-ic", Arg.String (set_string_option_once "-ic" input_conn),
- "uri " ^ s_"Libvirt URI";
- "-if", Arg.String (set_string_option_once "-if" input_format),
- "format " ^ s_"Input format (for -i disk)";
- "--in-place", Arg.Set in_place, " " ^ s_"Only tune the guest in the input VM";
- "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable";
- "-n", Arg.String add_network, "in:out " ^ s_"Map network 'in' to 'out'";
- "--network", Arg.String add_network, "in:out " ^ ditto;
- "--no-copy", Arg.Clear do_copy, " " ^ s_"Just write the metadata";
- "--no-trim", Arg.String no_trim_warning,
- "-" ^ " " ^ s_"Ignored for backwards compatibility";
- "-o", Arg.String set_output_mode, o_options ^ " " ^ s_"Set output mode (default: libvirt)";
- "-oa", Arg.String set_output_alloc,
- "sparse|preallocated " ^ s_"Set output allocation mode";
- "-oc", Arg.String (set_string_option_once "-oc" output_conn),
- "uri " ^ s_"Libvirt URI";
- "-of", Arg.String (set_string_option_once "-of" output_format),
- "raw|qcow2 " ^ s_"Set output format";
- "-on", Arg.String (set_string_option_once "-on" output_name),
- "name " ^ s_"Rename guest when converting";
- "-os", Arg.String (set_string_option_once "-os" output_storage),
- "storage " ^ s_"Set output storage location";
- "--password-file", Arg.String (set_string_option_once "--password-file" password_file),
- "file " ^ s_"Use password from file";
- "--print-source", Arg.Set print_source, " " ^ s_"Print source and stop";
- "--qemu-boot", Arg.Set qemu_boot, " " ^ s_"Boot in qemu (-o qemu only)";
- "--root", Arg.String set_root_choice,"ask|... " ^ s_"How to choose root filesystem";
- "--vdsm-image-uuid", Arg.String add_vdsm_image_uuid, "uuid " ^ s_"Output image UUID(s)";
- "--vdsm-vol-uuid", Arg.String add_vdsm_vol_uuid, "uuid " ^ s_"Output vol UUID(s)";
- "--vdsm-vm-uuid", Arg.String (set_string_option_once "--vdsm-vm-uuid" vdsm_vm_uuid),
- "uuid " ^ s_"Output VM UUID";
- "--vdsm-ovf-output", Arg.String (set_string_option_once "--vdsm-ovf-output" vdsm_ovf_output),
- " " ^ s_"Output OVF file";
- "--vmtype", Arg.String vmtype_warning,
- "- " ^ s_"Ignored for backwards compatibility";
+ [ "-b"; "--bridge" ], Getopt.String ("in:out", add_bridge), s_"Map bridge 'in' to 'out'";
+ [ "--compressed" ], Getopt.Set compressed, s_"Compress output file";
+ [ "--dcpath"; "--dcPath" ], Getopt.String ("path", set_string_option_once "--dcpath" dcpath),
+ s_"Override dcPath (for vCenter)";
+ [ "--debug-overlay"; "--debug-overlays" ], Getopt.Set debug_overlays, s_"Save overlay files";
+ [ "-i" ], Getopt.String (i_options, set_input_mode), s_"Set input mode (default: libvirt)";
+ [ "-ic" ], Getopt.String ("uri", set_string_option_once "-ic" input_conn),
+ s_"Libvirt URI";
+ [ "-if" ], Getopt.String ("format", set_string_option_once "-if" input_format),
+ s_"Input format (for -i disk)";
+ [ "--in-place" ], Getopt.Set in_place, s_"Only tune the guest in the input VM";
+ [ "--machine-readable" ], Getopt.Set machine_readable, s_"Make output machine readable";
+ [ "-n"; "--network" ], Getopt.String ("in:out", add_network), s_"Map network 'in' to 'out'";
+ [ "--no-copy" ], Getopt.Clear do_copy, s_"Just write the metadata";
+ [ "--no-trim" ], Getopt.String ("-", no_trim_warning),
+ s_"Ignored for backwards compatibility";
+ [ "-o" ], Getopt.String (o_options, set_output_mode), s_"Set output mode (default: libvirt)";
+ [ "-oa" ], Getopt.String ("sparse|preallocated", set_output_alloc),
+ s_"Set output allocation mode";
+ [ "-oc" ], Getopt.String ("uri", set_string_option_once "-oc" output_conn),
+ s_"Libvirt URI";
+ [ "-of" ], Getopt.String ("raw|qcow2", set_string_option_once "-of" output_format),
+ s_"Set output format";
+ [ "-on" ], Getopt.String ("name", set_string_option_once "-on" output_name),
+ s_"Rename guest when converting";
+ [ "-os" ], Getopt.String ("storage", set_string_option_once "-os" output_storage),
+ s_"Set output storage location";
+ [ "--password-file" ], Getopt.String ("file", set_string_option_once "--password-file" password_file),
+ s_"Use password from file";
+ [ "--print-source" ], Getopt.Set print_source, s_"Print source and stop";
+ [ "--qemu-boot" ], Getopt.Set qemu_boot, s_"Boot in qemu (-o qemu only)";
+ [ "--root" ], Getopt.String ("ask|... ", set_root_choice), s_"How to choose root filesystem";
+ [ "--vdsm-image-uuid" ], Getopt.String ("uuid", add_vdsm_image_uuid), s_"Output image UUID(s)";
+ [ "--vdsm-vol-uuid" ], Getopt.String ("uuid", add_vdsm_vol_uuid), s_"Output vol UUID(s)";
+ [ "--vdsm-vm-uuid" ], Getopt.String ("uuid", set_string_option_once "--vdsm-vm-uuid" vdsm_vm_uuid),
+ s_"Output VM UUID";
+ [ "--vdsm-ovf-output" ], Getopt.String ("-", set_string_option_once "--vdsm-ovf-output" vdsm_ovf_output),
+ s_"Output OVF file";
+ [ "--vmtype" ], Getopt.String ("-", vmtype_warning),
+ s_"Ignored for backwards compatibility";
] in
let argspec = set_standard_options argspec in
let args = ref [] in
@@ -239,7 +231,7 @@ A short summary of the options is given below. For detailed help please
read the man page virt-v2v(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ Getopt.parse argspec ~anon_fun usage_msg;
(* Dereference the arguments. *)
let args = List.rev !args in
diff --git a/v2v/copy_to_local.ml b/v2v/copy_to_local.ml
index 1811dca..713c21d 100644
--- a/v2v/copy_to_local.ml
+++ b/v2v/copy_to_local.ml
@@ -41,10 +41,10 @@ let rec main () =
(* Handle the command line. *)
let argspec = [
- "-ic", Arg.String (set_string_option_once "-ic" input_conn),
- "uri " ^ s_"Libvirt URI";
- "--password-file", Arg.String (set_string_option_once "--password-file" password_file),
- "file " ^ s_"Use password from file";
+ [ "-ic" ], Getopt.String ("uri", set_string_option_once "-ic" input_conn),
+ s_"Libvirt URI";
+ [ "--password-file" ], Getopt.String ("file", set_string_option_once "--password-file" password_file),
+ s_"Use password from file";
] in
let argspec = set_standard_options argspec in
let args = ref [] in
@@ -71,7 +71,7 @@ A short summary of the options is given below. For detailed help please
read the man page virt-v2v-copy-to-local(1).
")
prog in
- Arg.parse argspec anon_fun usage_msg;
+ Getopt.parse argspec ~anon_fun usage_msg;
let args = !args in
let input_conn = !input_conn in
--
2.7.4
8 years
- 2
- 2
IRC question about virt-builder ubuntu-* images
by Richard W.M. Jones
22:06 < adam12> rwmjones: If you're still around, just curious - any reason why the ubuntu14 image doesn't come with `dpkg-reconfigure openssh-server`
already configured for firstboot?
The reason is because I couldn't work out how to automate this in the
preseed script. If you want to have a go, then see:
https://github.com/libguestfs/libguestfs/blob/master/builder/website/ubun...
https://github.com/libguestfs/libguestfs/blob/master/builder/website/ubun...
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine. Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/
8 years
- 2
- 3
ANNOUNCE: Python packages available on http://libguestfs.org/download/python/
by Richard W.M. Jones
I have made available a Python package for the current stable branch
version of libguestfs:
http://libguestfs.org/download/python/
If you need to use libguestfs from Python this way, you can do so like
this:
pip install http://libguestfs.org/download/python/guestfs-1.32.6.tar.gz
A few caveats:
- You should probably not use these packages. Use the
python-libguestfs package provided by your Linux distro, as it is
always up to date w.r.t the latest libguestfs APIs.
- This Python package does not build libguestfs, so you have to get
the library from your Linux distro.
- The package depends implicitly on libguestfs-devel, pip and gcc.
- On Fedora the package also depends on redhat-rpm-config.
- This package is not available on Pypi because of ongoing licensing
issues we are trying to resolve. Please do not upload it there.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
8 years
- 1
- 0
Help: Can I access network inside libguestfs?
by Baochuan Wu
Hi All,
I mounted virtual disks of CentOS 6.4 using libguestfs. After mounting, I
tried to install some software using yum command. The yum command failed
because of DNS failure, I think I correctly configured DNS(/etc/resolv.conf
in the CentOS virtual disk).
I wonder is it possible to access network inside libguestfs?
Thanks,
Allen
8 years
- 3
- 4
[PATCH] v2v: Add support for Win2016 virtio drivers
by Tomáš Golembiovský
Support virtio drivers for Windows Server 2016 once they are available.
Signed-off-by: Tomáš Golembiovský <tgolembi(a)redhat.com>
---
v2v/windows_virtio.ml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/v2v/windows_virtio.ml b/v2v/windows_virtio.ml
index 354aa19..334e347 100644
--- a/v2v/windows_virtio.ml
+++ b/v2v/windows_virtio.ml
@@ -330,6 +330,8 @@ and virtio_iso_path_matches_guest_os path inspect =
(6, 3, not_client)
else if pathelem "w10" || pathelem "win10" then
(10, 0, is_client)
+ else if pathelem "2k16" || pathelem "win2016" then
+ (10, 0, not_client)
else
raise Not_found in
--
2.9.0
8 years
- 2
- 1