10:07 a.m.
Looks like virt-v2v cannot be built now, since it requires non-existing version
of libguestfs-devel.
Based on (no README or any instructions in virt-v2v)
http://libguestfs.org/guestfs-building.1.html
I tried this:
git clean -dxf
./autogen.sh
And it fails with:
--- Checking for libraries used by virt-v2v ---
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBGUESTFS... no
configure: error: Package requirements (libguestfs >= 1.41.5) were not met:
Package dependency requirement 'libguestfs >= 1.41.5' could not be satisfied.
Package 'libguestfs' has version '1.40.2', required version is '>=
1.41.5'
$ rpm -qa | grep libguestfs
libguestfs-xfs-1.40.2-4.fc30.x86_64
libguestfs-tools-c-1.40.2-4.fc30.x86_64
libguestfs-devel-1.40.2-4.fc30.x86_64
libguestfs-1.40.2-4.fc30.x86_64
Is it possible to build using libguestfs source?
Nir
11:03 a.m.
On Sun, Nov 17, 2019 at 06:07:48PM +0200, Nir Soffer wrote:
Looks like virt-v2v cannot be built now, since it requires
non-existing version
of libguestfs-devel.
Based on (no README or any instructions in virt-v2v)
http://libguestfs.org/guestfs-building.1.html
I tried this:
git clean -dxf
./autogen.sh
And it fails with:
--- Checking for libraries used by virt-v2v ---
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBGUESTFS... no
configure: error: Package requirements (libguestfs >= 1.41.5) were not met:
Package dependency requirement 'libguestfs >= 1.41.5' could not be satisfied.
Package 'libguestfs' has version '1.40.2', required version is '>=
1.41.5'
You can actually use 1.40 just fine. There is a single test which
requires 1.41 (I forget now which one), and we should probably change
that test to make it conditional. Just modify m4/guestfs-libraries.m4:
-PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.41.5])
+PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.40])
and rerun ‘autoreconf -i’.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html
11:11 a.m.
On Sun, Nov 17, 2019 at 7:03 PM Richard W.M. Jones <rjones(a)redhat.com> wrote:
On Sun, Nov 17, 2019 at 06:07:48PM +0200, Nir Soffer wrote:
> Looks like virt-v2v cannot be built now, since it requires non-existing version
> of libguestfs-devel.
>
> Based on (no README or any instructions in virt-v2v)
> http://libguestfs.org/guestfs-building.1.html
>
> I tried this:
>
> git clean -dxf
> ./autogen.sh
>
> And it fails with:
>
> --- Checking for libraries used by virt-v2v ---
> checking for pkg-config... /usr/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for LIBGUESTFS... no
> configure: error: Package requirements (libguestfs >= 1.41.5) were not met:
>
> Package dependency requirement 'libguestfs >= 1.41.5' could not be
satisfied.
> Package 'libguestfs' has version '1.40.2', required version is
'>= 1.41.5'
You can actually use 1.40 just fine. There is a single test which
requires 1.41 (I forget now which one), and we should probably change
that test to make it conditional. Just modify m4/guestfs-libraries.m4:
-PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.41.5])
+PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.40])
and rerun ‘autoreconf -i’.
Thanks, will try it.
7:03 p.m.
On Sun, Nov 17, 2019 at 7:03 PM Richard W.M. Jones <rjones(a)redhat.com> wrote:
On Sun, Nov 17, 2019 at 06:07:48PM +0200, Nir Soffer wrote:
> Looks like virt-v2v cannot be built now, since it requires non-existing version
> of libguestfs-devel.
>
> Based on (no README or any instructions in virt-v2v)
> http://libguestfs.org/guestfs-building.1.html
>
> I tried this:
>
> git clean -dxf
> ./autogen.sh
>
> And it fails with:
>
> --- Checking for libraries used by virt-v2v ---
> checking for pkg-config... /usr/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for LIBGUESTFS... no
> configure: error: Package requirements (libguestfs >= 1.41.5) were not met:
>
> Package dependency requirement 'libguestfs >= 1.41.5' could not be
satisfied.
> Package 'libguestfs' has version '1.40.2', required version is
'>= 1.41.5'
You can actually use 1.40 just fine. There is a single test which
requires 1.41 (I forget now which one), and we should probably change
that test to make it conditional. Just modify m4/guestfs-libraries.m4:
-PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.41.5])
+PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.40])
and rerun ‘autoreconf -i’.
Tried again with new clean checkout, this change fixes the issue.
The next issue is same as libguestfs:
autoreconf: running: automake --add-missing --copy --no-force
configure.ac:30: installing 'build-aux/missing'
configure.ac:102: error: required file 'common/options/Makefile.in' not found
configure.ac:102: error: required file 'common/mlaugeas/Makefile.in' not found
configure.ac:102: error: required file
'common/mlcustomize/Makefile.in' not found
...
parallel-tests: installing 'build-aux/test-driver'
gnulib/lib/Makefile.am: installing 'build-aux/depcomp'
autoreconf: automake failed with exit status: 1
autogen.sh ignores the error and continue, and finally failing with:
config.status: error: cannot find input file: `Makefile.in'
Looking in common we have:
$ tree common
common
├── mlgettext
│ └── common_gettext.ml
└── mlstdutils
I tried you other suggests for git submodules:
$ git submodule init
Submodule 'common' (https://github.com/libguestfs/libguestfs-common)
registered for path 'common'
$ git submodule update
fatal: destination path '/home/nsoffer/src/virt-v2v/common' already
exists and is not an empty directory.
fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into
submodule path '/home/nsoffer/src/virt-v2v/common' failed
Failed to clone 'common'. Retry scheduled
fatal: destination path '/home/nsoffer/src/virt-v2v/common' already
exists and is not an empty directory.
fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into
submodule path '/home/nsoffer/src/virt-v2v/common' failed
Failed to clone 'common' a second time, aborting
So I tried:
rm -rf common/*
$ git submodule update
Cloning into '/home/nsoffer/src/virt-v2v/common'...
Submodule path 'common': checked out
'8c42f772614b44a8cb974afa904ec9f518431ab2'
$ ./autogen.sh
This seems to fix the issue, but make failed with:
$ make -j8
There seems to be no Makefile in this directory.
You must run ./configure before running 'make'.
make: *** [GNUmakefile:108: abort-due-to-no-makefile] Error 1
$ ./configure
Works, but now make fail with:
$ make -j8
make all-recursive
make[1]: Entering directory '/home/nsoffer/src/virt-v2v'
Making all in common/mlstdutils
make[2]: Entering directory '/home/nsoffer/src/virt-v2v/common/mlstdutils'
OCAMLCMI guestfs_config.cmi
OCAMLCMI stringMap.cmi
CC libmlstdutils_a-dummy.o
OCAMLCMI stringSet.cmi
OCAMLCMI std_utils.cmi
ocamlfind: Package `guestfs' not found
ocamlfind: Package `guestfs' not found
ocamlfind: Package `guestfs' not found
ocamlfind: Package `guestfs' not found
make[2]: *** [Makefile:2547: stringMap.cmi] Error 2
make[2]: *** Waiting for unfinished jobs....
make[2]: *** [Makefile:2547: guestfs_config.cmi] Error 2
make[2]: *** [Makefile:2547: std_utils.cmi] Error 2
make[2]: *** [Makefile:2547: stringSet.cmi] Error 2
make[2]: Leaving directory '/home/nsoffer/src/virt-v2v/common/mlstdutils'
make[1]: *** [Makefile:2066: all-recursive] Error 1
make[1]: Leaving directory '/home/nsoffer/src/virt-v2v'
make: *** [Makefile:1986: all] Error 2
Sometihng missing in common?
3:39 a.m.
On Mon, Nov 18, 2019 at 03:03:10AM +0200, Nir Soffer wrote:
$ git submodule update
fatal: destination path '/home/nsoffer/src/virt-v2v/common' already
exists and is not an empty directory.
fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into
submodule path '/home/nsoffer/src/virt-v2v/common' failed
Failed to clone 'common'. Retry scheduled
fatal: destination path '/home/nsoffer/src/virt-v2v/common' already
exists and is not an empty directory.
fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into
submodule path '/home/nsoffer/src/virt-v2v/common' failed
Failed to clone 'common' a second time, aborting
So I tried:
rm -rf common/*
Sounds like files from the old directory were still around after a git
pull. Removing common/ was the right thing to do.
...
$ ./configure
Works, but now make fail with:
$ make -j8
make all-recursive
make[1]: Entering directory '/home/nsoffer/src/virt-v2v'
Making all in common/mlstdutils
make[2]: Entering directory '/home/nsoffer/src/virt-v2v/common/mlstdutils'
OCAMLCMI guestfs_config.cmi
OCAMLCMI stringMap.cmi
CC libmlstdutils_a-dummy.o
OCAMLCMI stringSet.cmi
OCAMLCMI std_utils.cmi
ocamlfind: Package `guestfs' not found
ocamlfind: Package `guestfs' not found
ocamlfind: Package `guestfs' not found
ocamlfind: Package `guestfs' not found
This happens because the Fedora package ocaml-libguestfs-devel is not
installed. ./configure should have spotting this was missing, so this
is a bug in virt-v2v.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
10:27 a.m.
On Mon, Nov 18, 2019 at 11:40 AM Richard W.M. Jones <rjones(a)redhat.com> wrote:
On Mon, Nov 18, 2019 at 03:03:10AM +0200, Nir Soffer wrote:
> $ git submodule update
> fatal: destination path '/home/nsoffer/src/virt-v2v/common' already
> exists and is not an empty directory.
> fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into
> submodule path '/home/nsoffer/src/virt-v2v/common' failed
> Failed to clone 'common'. Retry scheduled
> fatal: destination path '/home/nsoffer/src/virt-v2v/common' already
> exists and is not an empty directory.
> fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into
> submodule path '/home/nsoffer/src/virt-v2v/common' failed
> Failed to clone 'common' a second time, aborting
>
> So I tried:
>
> rm -rf common/*
Sounds like files from the old directory were still around after a git
pull. Removing common/ was the right thing to do.
I tried with new checkout:
rm -rf virt-v2v
git clone ...
So this must be another issue.
...
> $ ./configure
>
> Works, but now make fail with:
>
> $ make -j8
> make all-recursive
> make[1]: Entering directory '/home/nsoffer/src/virt-v2v'
> Making all in common/mlstdutils
> make[2]: Entering directory '/home/nsoffer/src/virt-v2v/common/mlstdutils'
> OCAMLCMI guestfs_config.cmi
> OCAMLCMI stringMap.cmi
> CC libmlstdutils_a-dummy.o
> OCAMLCMI stringSet.cmi
> OCAMLCMI std_utils.cmi
> ocamlfind: Package `guestfs' not found
> ocamlfind: Package `guestfs' not found
> ocamlfind: Package `guestfs' not found
> ocamlfind: Package `guestfs' not found
This happens because the Fedora package ocaml-libguestfs-devel is not
installed. ./configure should have spotting this was missing, so this
is a bug in virt-v2v.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
4:15 a.m.
I've pushed a few commits which fix various aspects of the build and
may improve things for you:
commit d5ce9c91469d3d384aa32735453a1f8a20d4ec25
Author: Richard W.M. Jones <rjones(a)redhat.com>
Date: Mon Nov 18 10:11:57 2019 +0000
tests: Add TESTS_ENVIRONMENT in a couple of makefiles.
We were accidentally testing the installed virt-v2v rather than the
locally built one.
commit fffa7732c5d4899217c36985f1ef753d2469f1cd
Author: Richard W.M. Jones <rjones(a)redhat.com>
Date: Mon Nov 18 09:46:49 2019 +0000
m4: Relax dependency on libguestfs versions.
1.41 was only required to run a single test, but in all other respects
1.40 works fine. Relax the dependency and fix the test instead.
Thanks: Nir Soffer.
commit 8cab32c0eb4b455d7f0700ef5966eed3a23b6327
Author: Richard W.M. Jones <rjones(a)redhat.com>
Date: Mon Nov 18 09:45:05 2019 +0000
m4: Remove daemon checks and dependency on hivex.
Now that we've split out virt-v2v, there's no daemon, and hivex is not
required (since it is only used through the guestfs API).
commit 48afc3b004e44feaf3844c5eeb96e2a1aadbeb03
Author: Richard W.M. Jones <rjones(a)redhat.com>
Date: Mon Nov 18 09:44:12 2019 +0000
m4: Check that ocaml 'guestfs' module is available.
It is required to compile virt-v2v after we split out libguestfs and
virt-v2v.
Thanks: Nir Soffer.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
11:11 a.m.
On Mon, Nov 18, 2019 at 12:15 PM Richard W.M. Jones <rjones(a)redhat.com> wrote:
I've pushed a few commits which fix various aspects of the build and
may improve things for you:
With current master building virt-v2v succeeds, thanks!
I think we still have an issue with new checkout, having to delete common/
and update the submodule.
commit d5ce9c91469d3d384aa32735453a1f8a20d4ec25
Author: Richard W.M. Jones <rjones(a)redhat.com>
Date: Mon Nov 18 10:11:57 2019 +0000
tests: Add TESTS_ENVIRONMENT in a couple of makefiles.
We were accidentally testing the installed virt-v2v rather than the
locally built one.
commit fffa7732c5d4899217c36985f1ef753d2469f1cd
Author: Richard W.M. Jones <rjones(a)redhat.com>
Date: Mon Nov 18 09:46:49 2019 +0000
m4: Relax dependency on libguestfs versions.
1.41 was only required to run a single test, but in all other respects
1.40 works fine. Relax the dependency and fix the test instead.
Thanks: Nir Soffer.
commit 8cab32c0eb4b455d7f0700ef5966eed3a23b6327
Author: Richard W.M. Jones <rjones(a)redhat.com>
Date: Mon Nov 18 09:45:05 2019 +0000
m4: Remove daemon checks and dependency on hivex.
Now that we've split out virt-v2v, there's no daemon, and hivex is not
required (since it is only used through the guestfs API).
commit 48afc3b004e44feaf3844c5eeb96e2a1aadbeb03
Author: Richard W.M. Jones <rjones(a)redhat.com>
Date: Mon Nov 18 09:44:12 2019 +0000
m4: Check that ocaml 'guestfs' module is available.
It is required to compile virt-v2v after we split out libguestfs and
virt-v2v.
Thanks: Nir Soffer.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
1:41 p.m.
On Mon, Nov 18, 2019 at 7:11 PM Nir Soffer <nsoffer(a)redhat.com> wrote:
On Mon, Nov 18, 2019 at 12:15 PM Richard W.M. Jones <rjones(a)redhat.com> wrote:
>
>
> I've pushed a few commits which fix various aspects of the build and
> may improve things for you:
With current master building virt-v2v succeeds, thanks!
I think we still have an issue with new checkout, having to delete common/
and update the submodule.
Tried this again with clean checkout.
Complete instructions for building virt-v2v in the first time:
git clone https://github.com/libguestfs/virt-v2v.git
cd virt-v2v
git submodule init
git submodule update
./autogen.sh
make
rm po-docs/podfiles
make -C po-docs update-po
./run virt-v2v --version
virt-v2v 1.41.7
Looks like autogen.sh and bootstrap need update for common submodule, since
they check and handle only gnulib status.
> commit d5ce9c91469d3d384aa32735453a1f8a20d4ec25
> Author: Richard W.M. Jones <rjones(a)redhat.com>
> Date: Mon Nov 18 10:11:57 2019 +0000
>
> tests: Add TESTS_ENVIRONMENT in a couple of makefiles.
>
> We were accidentally testing the installed virt-v2v rather than the
> locally built one.
>
> commit fffa7732c5d4899217c36985f1ef753d2469f1cd
> Author: Richard W.M. Jones <rjones(a)redhat.com>
> Date: Mon Nov 18 09:46:49 2019 +0000
>
> m4: Relax dependency on libguestfs versions.
>
> 1.41 was only required to run a single test, but in all other respects
> 1.40 works fine. Relax the dependency and fix the test instead.
>
> Thanks: Nir Soffer.
>
> commit 8cab32c0eb4b455d7f0700ef5966eed3a23b6327
> Author: Richard W.M. Jones <rjones(a)redhat.com>
> Date: Mon Nov 18 09:45:05 2019 +0000
>
> m4: Remove daemon checks and dependency on hivex.
>
> Now that we've split out virt-v2v, there's no daemon, and hivex is not
> required (since it is only used through the guestfs API).
>
> commit 48afc3b004e44feaf3844c5eeb96e2a1aadbeb03
> Author: Richard W.M. Jones <rjones(a)redhat.com>
> Date: Mon Nov 18 09:44:12 2019 +0000
>
> m4: Check that ocaml 'guestfs' module is available.
>
> It is required to compile virt-v2v after we split out libguestfs and
> virt-v2v.
>
> Thanks: Nir Soffer.
>
> Rich.
>
> --
> Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
> Read my programming and virtualization blog: http://rwmj.wordpress.com
> libguestfs lets you edit virtual machines. Supports shell scripting,
> bindings from many languages. http://libguestfs.org
>
1795
days inactive
1796
days old
8 comments
2 participants
participants (2)
-
Nir Soffer -
Richard W.M. Jones