Re: [Libguestfs] [PATCH] v2v: rhv-upload-plugin: Fix waiting for finalize

Waiting for image transfer finalize is complex. In the past we tried to simplify the process by waiting on the disk status, but turns out that due to the way oVirt lock the disk, this is not reliable. These is finalize success flow: 1. User asks to finalize the transfer 2. oVirt sets transfer phase to FINALIZING_SUCCESS 3. oVirt finalizes the transfer 4. oVirt sets disk status to OK 5. oVirt unlocks the disk and changes transfer phase to FINISHED_SUCCESS 6. oVirt removes the transfer In oVirt logs we can see that disk status changes to OK about 3 seconds before the disk is actually unlocked. This is a very old problem that is unlikely to be fixed. The only way to wait for transfer completion is to poll the transfer phase, but oVirt makes this hard by removing the transfer shortly after it completes, so we may not be able to get the FINISHED_SUCCESS phase. If the transfer was removed before we got one of the final phases, we need to check the disk status to understand the result of transfer. oVirt 4.4.7 made polling transfer phase easier by keeping the transfer after completion, but we need to support older versions so we must have generic code that work with any version. To make debugging easier, we log the transfer phase during polling. Here is a typical transfer log when finalizing transfer: finalizing transfer 59e545f3-db1f-4a6b-90b1-80ac66572faa transfer 59e545f3-db1f-4a6b-90b1-80ac66572faa is finalizing_success transfer 59e545f3-db1f-4a6b-90b1-80ac66572faa is finalizing_success transfer 59e545f3-db1f-4a6b-90b1-80ac66572faa is finalizing_success transfer 59e545f3-db1f-4a6b-90b1-80ac66572faa is finalizing_success transfer 59e545f3-db1f-4a6b-90b1-80ac66572faa is finished_success transfer 59e545f3-db1f-4a6b-90b1-80ac66572faa finalized in 5.153 seconds Signed-off-by: Nir Soffer <nsoffer(a)redhat.com&gt; --- v2v/rhv-upload-plugin.py | 102 +++++++++++++++++++++++++++------------ 1 file changed, 71 insertions(+), 31 deletions(-) diff --git a/v2v/rhv-upload-plugin.py b/v2v/rhv-upload-plugin.py index 07e879c9..11050358 100644 --- a/v2v/rhv-upload-plugin.py +++ b/v2v/rhv-upload-plugin.py @@ -607,17 +607,29 @@ def finalize_transfer(connection, transfer, disk_id): """ Finalize a transfer, making the transfer disk available. - If finalizing succeeds, transfer's phase will change to FINISHED_SUCCESS - and the transer's disk status will change to OK. On errors, the transfer's - phase will change to FINISHED_FAILURE and the disk status will change to - ILLEGAL and it will be removed. In both cases the transfer entity will be - removed shortly after. - - If oVirt fails to finalize the transfer, transfer's phase will change to - PAUSED_SYSTEM. In this case the disk's status will change to ILLEGAL and it - will not be removed. - - For simplicity, we track only disk's status changes. + If finalizing succeeds, the transfer's disk status will change to OK + and transfer's phase will change to FINISHED_SUCCESS. Unfortunately, + the disk status is modified before the transfer finishes, and oVirt + may still hold a lock on the disk at this point. + + The only way to make sure that the disk is unlocked, is to wait + until the transfer phase switches FINISHED_SUCCESS. Unfortunately + oVirt makes this hard to use because the transfer is removed shortly + after switching the phase to the final phase. However if the + transfer was removed, we can be sure that the disk is not unlocked,

+ since oVirt releases the locks before removing the transfer. + + On errors, the transfer's phase will change to FINISHED_FAILURE and + the disk status will change to ILLEGAL and it will be removed. Again + the transfer will be removed shortly after that. + + If oVirt fails to finalize the transfer, transfer's phase will + change to PAUSED_SYSTEM. In this case the disk's status will change + to ILLEGAL and it will not be removed. + + oVirt 4.4.7 made waiting for transfer easier by keeping transfers + after they complete, but we must support older versions so we have + generic code that work with any version. For more info see: - http://ovirt.github.io/ovirt-engine-api-model/4.4/#services/image_transfer @@ -632,34 +644,62 @@ def finalize_transfer(connection, transfer, disk_id): transfer_service.finalize() - disk_service = (connection.system_service() - .disks_service() - .disk_service(disk_id)) - while True: time.sleep(1) try: - disk = disk_service.get() + transfer = transfer_service.get() except sdk.NotFoundError: - # Disk verification failed and the system removed the disk. - raise RuntimeError( - "transfer %s failed: disk %s was removed" - % (transfer.id, disk_id)) + # Transfer was removed (ovirt < 4.4.7). We need to check the + # disk status to understand if the transfer was successful. + # Due to the way oVirt does locking, we know that the disk + # is unlocked at this point so we can check only once. - if disk.status == types.DiskStatus.ILLEGAL: - # Disk verification failed or transfer was paused by the system. - raise RuntimeError( - "transfer %s failed: disk is ILLEGAL" % transfer.id) + debug("transfer %s was removed, checking disk %s status" + % (transfer.id, disk_id)) - if disk.status == types.DiskStatus.OK: - debug("transfer %s finalized in %.3f seconds" - % (transfer.id, time.time() - start)) - break + disk_service = (connection.system_service() + .disks_service() + .disk_service(disk_id)) + + try: + disk = disk_service.get() + except sdk.NotFoundError: + raise RuntimeError( + "transfer %s failed: disk %s was removed" + % (transfer.id, disk_id)) + + debug("disk %s is %s" % (disk_id, disk.status)) + + if disk.status == types.DiskStatus.OK: + break - if time.time() > start + timeout: raise RuntimeError( - "timed out waiting for transfer %s to finalize" - % transfer.id) + "transfer %s failed: disk is %s" % (transfer.id, disk.status)) + else: + # Transfer exists, check if it reached one of the final + # phases, or we timed out. + + debug("transfer %s is %s" % (transfer.id, transfer.phase)) + + if transfer.phase == types.ImageTransferPhase.FINISHED_SUCCESS: + break + + if transfer.phase == types.ImageTransferPhase.FINISHED_FAILURE: + raise RuntimeError( + "transfer %s has failed" % (transfer.id,)) + + if transfer.phase == types.ImageTransferPhase.PAUSED_SYSTEM: + raise RuntimeError( + "transfer %s was paused by system" % (transfer.id,)) + + if time.time() > start + timeout: + raise RuntimeError( + "timed out waiting for transfer %s to finalize, " + "transfer is %s" + % (transfer.id, transfer.phase)) + + debug("transfer %s finalized in %.3f seconds" + % (transfer.id, time.time() - start)) def transfer_supports_format():