[PATCH v2] launch: add support for autodetection of appliance image format
by Pavel Butsykin
This feature allows you to use different image formats for the fixed
appliance. The raw format is used by default.
Signed-off-by: Pavel Butsykin <pbutsykin(a)virtuozzo.com>
---
lib/launch-direct.c | 2 ++
lib/launch-libvirt.c | 19 ++++++++++++-------
m4/guestfs_appliance.m4 | 11 +++++++++++
3 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/lib/launch-direct.c b/lib/launch-direct.c
index 0be662e25..b9b54857a 100644
--- a/lib/launch-direct.c
+++ b/lib/launch-direct.c
@@ -592,7 +592,9 @@ launch_direct (guestfs_h *g, void *datav, const char *arg)
append_list ("id=appliance");
append_list ("cache=unsafe");
append_list ("if=none");
+#ifndef APPLIANCE_FMT_AUTO
append_list ("format=raw");
+#endif
} end_list ();
start_list ("-device") {
append_list ("scsi-hd");
diff --git a/lib/launch-libvirt.c b/lib/launch-libvirt.c
index 4adb2cfb3..030ea6911 100644
--- a/lib/launch-libvirt.c
+++ b/lib/launch-libvirt.c
@@ -212,9 +212,10 @@ get_source_format_or_autodetect (guestfs_h *g, struct drive *drv)
/**
* Create a qcow2 format overlay, with the given C<backing_drive>
- * (file). The C<format> parameter, which must be non-NULL, is the
- * backing file format. This is used to create the appliance overlay,
- * and also for read-only drives.
+ * (file). The C<format> parameter is the backing file format.
+ * The C<format> parameter can be NULL, in this case the backing
+ * format will be determined automatically. This is used to create
+ * the appliance overlay, and also for read-only drives.
*/
static char *
make_qcow2_overlay (guestfs_h *g, const char *backing_drive,
@@ -223,8 +224,6 @@ make_qcow2_overlay (guestfs_h *g, const char *backing_drive,
char *overlay;
struct guestfs_disk_create_argv optargs;
- assert (format != NULL);
-
if (guestfs_int_lazy_make_tmpdir (g) == -1)
return NULL;
@@ -232,8 +231,10 @@ make_qcow2_overlay (guestfs_h *g, const char *backing_drive,
optargs.bitmask = GUESTFS_DISK_CREATE_BACKINGFILE_BITMASK;
optargs.backingfile = backing_drive;
- optargs.bitmask |= GUESTFS_DISK_CREATE_BACKINGFORMAT_BITMASK;
- optargs.backingformat = format;
+ if (format) {
+ optargs.bitmask |= GUESTFS_DISK_CREATE_BACKINGFORMAT_BITMASK;
+ optargs.backingformat = format;
+ }
if (guestfs_disk_create_argv (g, overlay, "qcow2", -1, &optargs) == -1) {
free (overlay);
@@ -461,7 +462,11 @@ launch_libvirt (guestfs_h *g, void *datav, const char *libvirt_uri)
/* Note that appliance can be NULL if using the old-style appliance. */
if (appliance) {
+#ifdef APPLIANCE_FMT_AUTO
+ params.appliance_overlay = make_qcow2_overlay (g, appliance, NULL);
+#else
params.appliance_overlay = make_qcow2_overlay (g, appliance, "raw");
+#endif
if (!params.appliance_overlay)
goto cleanup;
}
diff --git a/m4/guestfs_appliance.m4 b/m4/guestfs_appliance.m4
index 81c43879f..4e1ec8135 100644
--- a/m4/guestfs_appliance.m4
+++ b/m4/guestfs_appliance.m4
@@ -139,3 +139,14 @@ AC_SUBST([GUESTFS_DEFAULT_PATH])
AC_DEFINE_UNQUOTED([GUESTFS_DEFAULT_PATH], ["$GUESTFS_DEFAULT_PATH"],
[Define guestfs default path.])
+
+AC_ARG_ENABLE([appliance-fmt-auto],
+ [AS_HELP_STRING([--enable-appliance-fmt-auto],
+ [enable autodetection of appliance image format @<:@default=no@:>@])],
+ [ENABLE_APPLIANCE_FMT_AUTO="$enableval"],
+ [ENABLE_APPLIANCE_FMT_AUTO=no])
+
+if test "x$ENABLE_APPLIANCE_FMT_AUTO" = "xyes"; then
+ AC_DEFINE([APPLIANCE_FMT_AUTO], [1],
+ [Define to 1 if enabled autodetection of appliance image format.])
+fi
--
2.13.0
4 years, 9 months
Re: [Libguestfs] [ovirt-users] Slow conversion from VMware in 4.1
by Richard W.M. Jones
On Wed, Jan 24, 2018 at 11:49:13PM +0100, Luca 'remix_tj' Lorenzetto wrote:
> Hello,
>
> i've started my migrations from vmware today. I had successfully
> migrated over 200 VM from vmware to another cluster based on 4.0 using
> our home-made scripts interacting with the API's. All the migrated vms
> are running RHEL 6 or 7, with no SELinux.
>
> We understood a lot about the necessities and we recorded also some
> metrics about migration times. In July, with 4.0 as destination, we
> were migrating ~30gb vm in ~40 mins.
> It was an acceptable time, considering that about 50% of our vms stand
> around that size.
>
> Today we started migrating to the production cluster, that is,
> instead, running 4.1.8. With the same scripts, the same api calls, and
> a vm of about 50gb we were supposing that we will have the vm running
> in the new cluster after 70 minutes, more or less.
>
> Instead, the migration is taking more than 2 hours, and this not
> because of the slow conversion time by qemu-img given that we're
> transferring an entire disk via http.
> Looking at the log, seems that activities executed before qemu-img
> took more than 2000 seconds. As example, appears to me that dracut
> took more than 14 minutes, which is in my opinion a bit long.
There's got to be some difference between your staging environment and
your production environment, and I'm pretty sure it has nothing to do
with the version of oVirt.
Are you running virt-v2v inside a virtual machine, and previously you
ran it on bare-metal? Or did you disable nested KVM? That seems like
the most likely explanation for the difference (although I'm surprised
that the difference is so large).
Rich.
> Is there any option to get a quicker conversion? Also some tasks to
> run in the guests before the conversion are accepted.
>
> We have to migrate ~300 vms in 2.5 months, and we're only at 11 after
> 7 hours (and today an exception that allowed us to start 4 hours in
> advance, but usually our maintenance time is significantly lower).
>
> This is a filtered out log reporting only the rows were we can
> understand how much time has passed:
>
> [ 0.0] Opening the source -i libvirt -ic
> vpx://vmwareuser%40domain@vcenter/DC/Cluster/Host?no_verify=1
> vmtoconvert
> [ 6.1] Creating an overlay to protect the source from being modified
> [ 7.4] Initializing the target -o vdsm -os
> /rhev/data-center/e8263fb4-114d-4706-b1c0-5defcd15d16b/a118578a-4cf2-4e0c-ac47-20e9f0321da1
> --vdsm-image-uuid 1a93e503-ce57-4631-8dd2-eeeae45866ca --vdsm-vol-uuid
> 88d92582-0f53-43b0-89ff-af1c17ea8618 --vdsm-vm-uuid
> 1434e14f-e228-41c1-b769-dcf48b258b12 --vdsm-ovf-output
> /var/run/vdsm/v2v
> [ 7.4] Opening the overlay
> [00034ms] /usr/libexec/qemu-kvm \
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.10.0-693.11.1.el7.x86_64
> (mockbuild(a)x86-041.build.eng.bos.redhat.com) (gcc version 4.8.5
> 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Fri Oct 27 05:39:05 EDT
> 2017
> [ 0.000000] Command line: panic=1 console=ttyS0 edd=off
> udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1
> cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable
> 8250.nr_uarts=1 root=/dev/sdb selinux=0 guestfs_verbose=1
> guestfs_network=1 TERM=linux guestfs_identifier=v2v
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007cfddfff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000007cfde000-0x000000007cffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.8 present.
> [ 0.000000] Hypervisor detected: KVM
> [ 0.000000] e820: last_pfn = 0x7cfde max_arch_pfn = 0x400000000
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] found SMP MP-table at [mem 0x000f72f0-0x000f72ff]
> mapped at [ffff8800000f72f0]
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] RAMDISK: [mem 0x7ccb2000-0x7cfcffff]
> [ 0.000000] Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 00000000000f70d0 00014 (v00 BOCHS )
> [ 0.000000] ACPI: RSDT 000000007cfe14d5 0002C (v01 BOCHS BXPCRSDT
> 00000001 BXPC 00000001)
> [ 0.000000] ACPI: FACP 000000007cfe13e9 00074 (v01 BOCHS BXPCFACP
> 00000001 BXPC 00000001)
> [ 0.000000] ACPI: DSDT 000000007cfe0040 013A9 (v01 BOCHS BXPCDSDT
> 00000001 BXPC 00000001)
> [ 0.000000] ACPI: FACS 000000007cfe0000 00040
> [ 0.000000] ACPI: APIC 000000007cfe145d 00078 (v01 BOCHS BXPCAPIC
> 00000001 BXPC 00000001)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cfddfff]
> [ 0.000000] NODE_DATA(0) allocated [mem 0x7cc8b000-0x7ccb1fff]
> [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
> [ 0.000000] kvm-clock: cpu 0, msr 0:7cc3b001, primary cpu clock
> [ 0.000000] kvm-clock: using sched offset of 1030608733 cycles
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
> [ 0.000000] node 0: [mem 0x00100000-0x7cfddfff]
> [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x7cfddfff]
> [ 0.000000] ACPI: PM-Timer IO Port: 0x608
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> [ 0.000000] e820: [mem 0x7d000000-0xfeffbfff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on KVM
> [ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:1
> nr_cpu_ids:1 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007ca00000 s97048
> r8192 d29928 u2097152
> [ 0.000000] KVM setup async PF for cpu 0
> [ 0.000000] kvm-stealtime: cpu 0, msr 7ca0f440
> [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
> Total pages: 503847
> [ 0.000000] Policy zone: DMA32
> [ 0.000000] Kernel command line: panic=1 console=ttyS0 edd=off
> udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1
> cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable
> 8250.nr_uarts=1 root=/dev/sdb selinux=0 guestfs_verbose=1
> guestfs_network=1 TERM=linux guestfs_identifier=v2v
> [ 0.000000] Disabling memory control group subsystem
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using
> standard form
> [ 0.000000] Memory: 1994224k/2047864k available (6886k kernel code,
> 392k absent, 53248k reserved, 4545k data, 1764k init)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] \tRCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=1.
> [ 0.000000] NR_IRQS:327936 nr_irqs:256 0
> [ 0.000000] Console: colour *CGA 80x25
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] tsc: Detected 2099.998 MHz processor
> [ 0.065500] Calibrating delay loop (skipped) preset value.. 4199.99
> BogoMIPS (lpj=2099998)
> [ 0.066153] pid_max: default: 32768 minimum: 301
> [ 0.066548] Security Framework initialized
> [ 0.066872] SELinux: Disabled at boot.
> [ 0.067181] Yama: becoming mindful.
> [ 0.067622] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 0.068574] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.069290] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.069813] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.070525] Initializing cgroup subsys memory
> [ 0.070877] Initializing cgroup subsys devices
> [ 0.071237] Initializing cgroup subsys freezer
> [ 0.071589] Initializing cgroup subsys net_cls
> [ 0.071932] Initializing cgroup subsys blkio
> [ 0.072275] Initializing cgroup subsys perf_event
> [ 0.072644] Initializing cgroup subsys hugetlb
> [ 0.072984] Initializing cgroup subsys pids
> [ 0.073316] Initializing cgroup subsys net_prio
> [ 0.073721] CPU: Physical Processor ID: 0
> [ 0.074810] mce: CPU supports 10 MCE banks
> [ 0.075185] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
> [ 0.075621] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
> [ 0.076030] tlb_flushall_shift: 6
> [ 0.085827] Freeing SMP alternatives: 24k freed
> [ 0.091125] ACPI: Core revision 20130517
> [ 0.091976] ACPI: All ACPI Tables successfully acquired
> [ 0.092448] ftrace: allocating 26586 entries in 104 pages
> [ 0.116144] smpboot: Max logical packages: 1
> [ 0.116640] Enabling x2apic
> [ 0.116863] Enabled x2apic
> [ 0.117290] Switched APIC routing to physical x2apic.
> [ 0.118588] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.119054] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2683 v4 @
> 2.10GHz (fam: 06, model: 4f, stepping: 01)
> [ 0.119813] Performance Events: 16-deep LBR, Broadwell events,
> Intel PMU driver.
> [ 0.121545] ... version: 2
> [ 0.121847] ... bit width: 48
> [ 0.122161] ... generic registers: 4
> [ 0.122472] ... value mask: 0000ffffffffffff
> [ 0.122874] ... max period: 000000007fffffff
> [ 0.123276] ... fixed-purpose events: 3
> [ 0.123584] ... event mask: 000000070000000f
> [ 0.124004] KVM setup paravirtual spinlock
> [ 0.125379] Brought up 1 CPUs
> [ 0.125616] smpboot: Total of 1 processors activated (4199.99 BogoMIPS)
> [ 0.126464] devtmpfs: initialized
> [ 0.128347] EVM: security.selinux
> [ 0.128608] EVM: security.ima
> [ 0.128835] EVM: security.capability
> [ 0.129796] atomic64 test passed for x86-64 platform with CX8 and with SSE
> [ 0.130333] pinctrl core: initialized pinctrl subsystem
> [ 0.130805] RTC time: 20:26:38, date: 01/24/18
> [ 0.131217] NET: Registered protocol family 16
> [ 0.131774] ACPI: bus type PCI registered
> [ 0.132096] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.132660] PCI: Using configuration type 1 for base access
> [ 0.133830] ACPI: Added _OSI(Module Device)
> [ 0.134170] ACPI: Added _OSI(Processor Device)
> [ 0.134514] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.134872] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.137001] ACPI: Interpreter enabled
> [ 0.137303] ACPI: (supports S0 S5)
> [ 0.137573] ACPI: Using IOAPIC for interrupt routing
> [ 0.137971] PCI: Using host bridge windows from ACPI; if necessary,
> use "pci=nocrs" and report a bug
> [ 0.140442] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.140917] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
> [ 0.141446] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> [ 0.141961] acpi PNP0A03:00: fail to add MMCONFIG information,
> can't access extended PCI configuration space under this bridge.
> [ 0.142997] acpiphp: Slot [2] registered
> [ 0.143309] acpiphp: Slot [3] registered
> [ 0.143625] acpiphp: Slot [4] registered
> [ 0.143949] acpiphp: Slot [5] registered
> [ 0.144260] acpiphp: Slot [6] registered
> [ 0.144575] acpiphp: Slot [7] registered
> [ 0.144887] acpiphp: Slot [8] registered
> [ 0.145205] acpiphp: Slot [9] registered
> [ 0.145523] acpiphp: Slot [10] registered
> [ 0.145841] acpiphp: Slot [11] registered
> [ 0.146161] acpiphp: Slot [12] registered
> [ 0.146642] acpiphp: Slot [13] registered
> [ 0.146960] acpiphp: Slot [14] registered
> [ 0.147279] acpiphp: Slot [15] registered
> [ 0.147602] acpiphp: Slot [16] registered
> [ 0.147934] acpiphp: Slot [17] registered
> [ 0.148255] acpiphp: Slot [18] registered
> [ 0.148579] acpiphp: Slot [19] registered
> [ 0.148896] acpiphp: Slot [20] registered
> [ 0.149219] acpiphp: Slot [21] registered
> [ 0.149546] acpiphp: Slot [22] registered
> [ 0.149863] acpiphp: Slot [23] registered
> [ 0.150178] acpiphp: Slot [24] registered
> [ 0.150505] acpiphp: Slot [25] registered
> [ 0.150824] acpiphp: Slot [26] registered
> [ 0.151139] acpiphp: Slot [27] registered
> [ 0.151461] acpiphp: Slot [28] registered
> [ 0.151786] acpiphp: Slot [29] registered
> [ 0.152104] acpiphp: Slot [30] registered
> [ 0.152426] acpiphp: Slot [31] registered
> [ 0.152741] PCI host bridge to bus 0000:00
> [ 0.153059] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.153478] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> [ 0.153991] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.154508] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff window]
> [ 0.155072] pci_bus 0000:00: root bus resource [mem
> 0x7d000000-0xfebfffff window]
> [ 0.162550] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
> [ 0.163097] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
> [ 0.163590] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
> [ 0.164129] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
> [ 0.165004] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by
> PIIX4 ACPI
> [ 0.165564] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
> [ 0.223140] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> [ 0.223712] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> [ 0.224245] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> [ 0.224789] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> [ 0.225296] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
> [ 0.225817] ACPI: Enabled 2 GPEs in block 00 to 0F
> [ 0.226262] vgaarb: loaded
> [ 0.227000] SCSI subsystem initialized
> [ 0.227314] ACPI: bus type USB registered
> [ 0.227640] usbcore: registered new interface driver usbfs
> [ 0.228068] usbcore: registered new interface driver hub
> [ 0.228487] usbcore: registered new device driver usb
> [ 0.228936] PCI: Using ACPI for IRQ routing
> [ 0.229436] NetLabel: Initializing
> [ 0.230112] NetLabel: domain hash size = 128
> [ 0.230455] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.230843] NetLabel: unlabeled traffic allowed by default
> [ 0.231317] amd_nb: Cannot enumerate AMD northbridges
> [ 0.231722] Switched to clocksource kvm-clock
> [ 0.235503] pnp: PnP ACPI init
> [ 0.235767] ACPI: bus type PNP registered
> [ 0.236396] pnp: PnP ACPI: found 5 devices
> [ 0.236716] ACPI: bus type PNP unregistered
> [ 0.242333] NET: Registered protocol family 2
> [ 0.242806] TCP established hash table entries: 16384 (order: 5,
> 131072 bytes)
> [ 0.243384] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
> [ 0.243907] TCP: Hash tables configured (established 16384 bind 16384)
> [ 0.244414] TCP: reno registered
> [ 0.244668] UDP hash table entries: 1024 (order: 3, 32768 bytes)
> [ 0.245130] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
> [ 0.245656] NET: Registered protocol family 1
> [ 0.246013] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> [ 0.246473] pci 0000:00:01.0: PIIX3: Enabling Passive Release
> [ 0.246924] pci 0000:00:01.0: Activating ISA DMA hang workarounds
> [ 0.247457] Unpacking initramfs...
> [ 0.249930] Freeing initrd memory: 3192k freed
> [ 0.251174] sha1_ssse3: Using AVX optimized SHA-1 implementation
> [ 0.251706] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
> [ 0.252355] futex hash table entries: 256 (order: 2, 16384 bytes)
> [ 0.252836] Initialise system trusted keyring
> [ 0.253187] audit: initializing netlink socket (disabled)
> [ 0.253610] type=2000 audit(1516825598.479:1): initialized
> [ 0.275426] HugeTLB registered 1 GB page size, pre-allocated 0 pages
> [ 0.275927] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.277129] zpool: loaded
> [ 0.277350] zbud: loaded
> [ 0.277669] VFS: Disk quotas dquot_6.5.2
> [ 0.277998] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.278609] msgmni has been set to 3901
> [ 0.278956] Key type big_key registered
> [ 0.279450] NET: Registered protocol family 38
> [ 0.279810] Key type asymmetric registered
> [ 0.280125] Asymmetric key parser 'x509' registered
> [ 0.280523] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 250)
> [ 0.281107] io scheduler noop registered
> [ 0.281416] io scheduler deadline registered (default)
> [ 0.281839] io scheduler cfq registered
> [ 0.282216] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.282648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.283250] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 0.283835] ACPI: Power Button [PWRF]
> [ 0.284207] GHES: HEST is not enabled!
> [ 0.284534] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
> [ 0.307889] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.308457] Non-volatile memory driver v1.3
> [ 0.308809] Linux agpgart interface v0.103
> [ 0.309200] crash memory driver: version 1.1
> [ 0.309568] rdac: device handler registered
> [ 0.309913] hp_sw: device handler registered
> [ 0.310247] emc: device handler registered
> [ 0.310565] alua: device handler registered
> [ 0.310922] libphy: Fixed MDIO Bus: probed
> [ 0.311267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.311780] ehci-pci: EHCI PCI platform driver
> [ 0.312129] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.312609] ohci-pci: OHCI PCI platform driver
> [ 0.312958] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.313474] usbcore: registered new interface driver usbserial
> [ 0.313926] usbcore: registered new interface driver usbserial_generic
> [ 0.314428] usbserial: USB Serial support registered for generic
> [ 0.314911] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU]
> at 0x60,0x64 irq 1,12
> [ 0.316032] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.316418] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.316857] mousedev: PS/2 mouse device common for all mice
> [ 0.317468] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input1
> [ 0.318561] input: VirtualPS/2 VMware VMMouse as
> /devices/platform/i8042/serio1/input/input2
> [ 0.319363] input: VirtualPS/2 VMware VMMouse as
> /devices/platform/i8042/serio1/input/input3
> [ 0.320042] rtc_cmos 00:00: RTC can wake from S4
> [ 0.320573] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
> [ 0.321099] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram
> [ 0.321632] cpuidle: using governor menu
> [ 0.321989] hidraw: raw HID events driver (C) Jiri Kosina
> [ 0.322467] usbcore: registered new interface driver usbhid
> [ 0.322894] usbhid: USB HID core driver
> [ 0.323734] drop_monitor: Initializing network drop monitor service
> [ 0.324272] TCP: cubic registered
> [ 0.324537] Initializing XFRM netlink socket
> [ 0.324936] NET: Registered protocol family 10
> [ 0.325410] NET: Registered protocol family 17
> [ 0.325872] microcode: CPU0 sig=0x406f1, pf=0x1, revision=0x1
> [ 0.326331] microcode: Microcode Update Driver: v2.01
> <tigran(a)aivazian.fsnet.co.uk>, Peter Oruba
> [ 0.327060] Loading compiled-in X.509 certificates
> [ 0.327855] Loaded X.509 cert 'Red Hat Enterprise Linux Driver
> Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80'
> [ 0.329151] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch
> signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8'
> [ 0.330379] Loaded X.509 cert 'Red Hat Enterprise Linux kernel
> signing key: 34fc3b85a61b8fead6e9e905e7e602a1f7fa049a'
> [ 0.331196] registered taskstats version 1
> [ 0.331639] Key type trusted registered
> [ 0.332056] Key type encrypted registered
> [ 0.332920] IMA: No TPM chip found, activating TPM-bypass!
> [ 0.333605] Magic number: 2:270:448
> [ 0.333970] rtc_cmos 00:00: setting system clock to 2018-01-24
> 20:26:38 UTC (1516825598)
> [ 0.335302] Freeing unused kernel memory: 1764k freed
> [ 0.339427] alg: No test for crc32 (crc32-pclmul)
> [ 0.342995] alg: No test for crc32 (crc32-generic)
> [ 0.352535] scsi host0: ata_piix
> [ 0.352853] scsi host1: ata_piix
> [ 0.353127] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0c0 irq 14
> [ 0.353645] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0c8 irq 15
> [ 0.541003] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> [ 0.545766] random: fast init done
> [ 0.548737] random: crng init done
> [ 0.565923] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [ 0.567592] scsi host2: Virtio SCSI HBA
> [ 0.569801] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK
> 2.5+ PQ: 0 ANSI: 5
> [ 0.570526] scsi 2:0:1:0: Direct-Access QEMU QEMU HARDDISK
> 2.5+ PQ: 0 ANSI: 5
> [ 0.580538] sd 2:0:0:0: [sda] 104857600 512-byte logical blocks:
> (53.6 GB/50.0 GiB)
> [ 0.581264] sd 2:0:1:0: [sdb] 8388608 512-byte logical blocks:
> (4.29 GB/4.00 GiB)
> [ 0.581894] sd 2:0:0:0: [sda] Write Protect is off
> [ 0.582312] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 0.583032] sd 2:0:1:0: [sdb] Write Protect is off
> [ 0.583444] sd 2:0:1:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 0.586373] sd 2:0:1:0: [sdb] Attached SCSI disk
> [ 0.602190] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> [ 0.636655] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
> [ 1.253809] tsc: Refined TSC clocksource calibration: 2099.994 MHz
> [ 1.510203] sda: sda1 sda2 sda3
> [ 1.511710] sd 2:0:0:0: [sda] Attached SCSI disk
> [ 1.528245] EXT4-fs (sdb): mounting ext2 file system using the ext4 subsystem
> [ 1.530353] EXT4-fs (sdb): mounted filesystem without journal. Opts:
> [/usr/lib/tmpfiles.d/systemd.conf:11] Unknown group 'utmp'.
> [/usr/lib/tmpfiles.d/systemd.conf:19] Unknown user 'systemd-network'.
> [/usr/lib/tmpfiles.d/systemd.conf:20] Unknown user 'systemd-network'.
> [/usr/lib/tmpfiles.d/systemd.conf:21] Unknown user 'systemd-network'.
> [/usr/lib/tmpfiles.d/systemd.conf:25] Unknown group 'systemd-journal'.
> [/usr/lib/tmpfiles.d/systemd.conf:26] Unknown group 'systemd-journal'.
> [ 1.650422] input: PC Speaker as /devices/platform/pcspkr/input/input4
> [ 1.655216] piix4_smbus 0000:00:01.3: SMBus Host Controller at
> 0x700, revision 0
> [ 1.694118] sd 2:0:0:0: Attached scsi generic sg0 type 0
> [ 1.696802] sd 2:0:1:0: Attached scsi generic sg1 type 0
> [ 1.698009] FDC 0 is a S82078B
> [ 1.710807] AES CTR mode by8 optimization enabled
> [ 1.724293] ppdev: user-space parallel port driver
> [ 1.732252] Error: Driver 'pcspkr' is already registered, aborting...
> [ 1.734673] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
> [ 1.746232] EDAC MC: Ver: 3.0.0
> [ 1.749324] EDAC sbridge: Ver: 1.1.1
> [ 25.658309] device-mapper: uevent: version 1.0.3
> [ 25.659092] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
> initialised: dm-devel(a)redhat.com
> [ 57.8] Inspecting the overlay
> [ 51.302190] EXT4-fs (sda1): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 58.667082] EXT4-fs (dm-1): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 61.147593] EXT4-fs (dm-4): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 63.977572] EXT4-fs (dm-0): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 75.614795] EXT4-fs (dm-6): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 80.782266] EXT4-fs (dm-5): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 98.734329] EXT4-fs (dm-2): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 102.090148] EXT4-fs (dm-7): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 105.057661] EXT4-fs (dm-3): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 108.085788] EXT4-fs (dm-9): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 111.328257] EXT4-fs (dm-8): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 112.201934] EXT4-fs (dm-0): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 112.212101] EXT4-fs (dm-2): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 112.221689] EXT4-fs (dm-5): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 112.233016] EXT4-fs (dm-6): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 112.971075] EXT4-fs (dm-4): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 113.788961] EXT4-fs (dm-1): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 113.799156] EXT4-fs (sda1): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 113.811402] EXT4-fs (dm-3): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 113.823347] EXT4-fs (dm-9): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 115.345857] EXT4-fs (dm-7): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 115.356280] EXT4-fs (dm-8): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 476.5] Checking for sufficient free disk space in the guest
> [ 476.5] Estimating space required on target for each disk
> [ 476.5] Converting Red Hat Enterprise Linux Server 7.4 (Maipo) to run on KVM
> [ 1072.265252] dracut[1565] No '/dev/log' or 'logger' included for
> syslog logging
> [ 1076.444899] dracut[1565] Executing: /sbin/dracut --verbose
> --add-drivers "virtio virtio_ring virtio_blk virtio_scsi virtio_net
> virtio_pci" /boot/initramfs-3.10.0-693.el7.x86_64.img
> 3.10.0-693.el7.x86_64
> [ 1104.118050] dracut[1565] dracut module 'busybox' will not be
> installed, because command 'busybox' could not be found!
> [ 1111.893587] dracut[1565] dracut module 'crypt' will not be
> installed, because command 'cryptsetup' could not be found!
> [ 1112.694542] dracut[1565] dracut module 'dmraid' will not be
> installed, because command 'dmraid' could not be found!
> [ 1117.763735] dracut[1565] dracut module 'mdraid' will not be
> installed, because command 'mdadm' could not be found!
> [ 1117.769004] dracut[1565] dracut module 'multipath' will not be
> installed, because command 'multipath' could not be found!
> [ 1122.366992] dracut[1565] dracut module 'cifs' will not be
> installed, because command 'mount.cifs' could not be found!
> [ 1122.387968] dracut[1565] dracut module 'iscsi' will not be
> installed, because command 'iscsistart' could not be found!
> [ 1122.390569] dracut[1565] dracut module 'iscsi' will not be
> installed, because command 'iscsi-iname' could not be found!
> [ 1140.889553] dracut[1565] dracut module 'busybox' will not be
> installed, because command 'busybox' could not be found!
> [ 1140.910458] dracut[1565] dracut module 'crypt' will not be
> installed, because command 'cryptsetup' could not be found!
> [ 1140.915646] dracut[1565] dracut module 'dmraid' will not be
> installed, because command 'dmraid' could not be found!
> [ 1140.924489] dracut[1565] dracut module 'mdraid' will not be
> installed, because command 'mdadm' could not be found!
> [ 1140.928995] dracut[1565] dracut module 'multipath' will not be
> installed, because command 'multipath' could not be found!
> [ 1140.939832] dracut[1565] dracut module 'cifs' will not be
> installed, because command 'mount.cifs' could not be found!
> [ 1140.954810] dracut[1565] dracut module 'iscsi' will not be
> installed, because command 'iscsistart' could not be found!
> [ 1140.957229] dracut[1565] dracut module 'iscsi' will not be
> installed, because command 'iscsi-iname' could not be found!
> [ 1142.066303] dracut[1565] *** Including module: bash ***
> [ 1142.073837] dracut[1565] *** Including module: nss-softokn ***
> [ 1143.838047] dracut[1565] *** Including module: i18n ***
> [ 1230.935044] dracut[1565] *** Including module: network ***
> [ 1323.749409] dracut[1565] *** Including module: ifcfg ***
> [ 1323.755682] dracut[1565] *** Including module: drm ***
> [ 1340.716219] dracut[1565] *** Including module: plymouth ***
> [ 1359.941093] dracut[1565] *** Including module: dm ***
> [ 1366.392221] dracut[1565] Skipping udev rule: 64-device-mapper.rules
> [ 1366.394670] dracut[1565] Skipping udev rule: 60-persistent-storage-dm.rules
> [ 1366.397021] dracut[1565] Skipping udev rule: 55-dm.rules
> [ 1375.796931] dracut[1565] *** Including module: kernel-modules ***
> [ 1627.998656] dracut[1565] *** Including module: lvm ***
> [ 1631.138460] dracut[1565] Skipping udev rule: 64-device-mapper.rules
> [ 1631.141015] dracut[1565] Skipping udev rule: 56-lvm.rules
> [ 1631.143409] dracut[1565] Skipping udev rule: 60-persistent-storage-lvm.rules
> [ 1635.270706] dracut[1565] *** Including module: qemu ***
> [ 1635.277842] dracut[1565] *** Including module: rootfs-block ***
> [ 1636.845616] dracut[1565] *** Including module: terminfo ***
> [ 1639.189294] dracut[1565] *** Including module: udev-rules ***
> [ 1640.076624] dracut[1565] Skipping udev rule: 40-redhat-cpu-hotplug.rules
> [ 1649.962889] dracut[1565] Skipping udev rule: 91-permissions.rules
> [ 1651.008527] dracut[1565] *** Including module: biosdevname ***
> [ 1651.921630] dracut[1565] *** Including module: systemd ***
> [ 1685.124521] dracut[1565] *** Including module: usrmount ***
> [ 1685.128532] dracut[1565] *** Including module: base ***
> [ 1694.743507] dracut[1565] *** Including module: fs-lib ***
> [ 1696.295216] dracut[1565] *** Including module: shutdown ***
> [ 1698.578228] dracut[1565] *** Including modules done ***
> [ 1699.586287] dracut[1565] *** Installing kernel module dependencies
> and firmware ***
> [ 1717.505952] dracut[1565] *** Installing kernel module dependencies
> and firmware done ***
> [ 1724.539224] dracut[1565] *** Resolving executable dependencies ***
> [ 1844.709874] dracut[1565] *** Resolving executable dependencies done***
> [ 1844.723313] dracut[1565] *** Hardlinking files ***
> [ 1847.281611] dracut[1565] *** Hardlinking files done ***
> [ 1847.284119] dracut[1565] *** Stripping files ***
> [ 1908.635888] dracut[1565] *** Stripping files done ***
> [ 1908.638262] dracut[1565] *** Generating early-microcode cpio image
> contents ***
> [ 1908.645054] dracut[1565] *** Constructing GenuineIntel.bin ****
> [ 1909.567397] dracut[1565] *** Store current command line parameters ***
> [ 1909.571686] dracut[1565] *** Creating image file ***
> [ 1909.574239] dracut[1565] *** Creating microcode section ***
> [ 1911.789907] dracut[1565] *** Created microcode section ***
> [ 1921.680575] dracut[1565] *** Creating image file done ***
> [ 1926.764407] dracut[1565] *** Creating initramfs image file
> '/boot/initramfs-3.10.0-693.el7.x86_64.img' done ***
> [1994.1] Mapping filesystem data to avoid copying unused and blank areas
> [ 1984.841231] EXT4-fs (dm-8): mounted filesystem with ordered data
> mode. Opts: discard
> [ 1987.252106] EXT4-fs (dm-9): mounted filesystem with ordered data
> mode. Opts: discard
> [ 1990.531305] EXT4-fs (dm-3): mounted filesystem with ordered data
> mode. Opts: discard
> [ 1992.903109] EXT4-fs (dm-7): mounted filesystem with ordered data
> mode. Opts: discard
> [ 1995.876230] EXT4-fs (dm-2): mounted filesystem with ordered data
> mode. Opts: discard
> [ 1995.986384] EXT4-fs (dm-5): mounted filesystem with ordered data
> mode. Opts: discard
> [ 1997.748087] EXT4-fs (dm-6): mounted filesystem with ordered data
> mode. Opts: discard
> [ 1997.785914] EXT4-fs (dm-0): mounted filesystem with ordered data
> mode. Opts: discard
> [ 1997.824003] EXT4-fs (dm-4): mounted filesystem with ordered data
> mode. Opts: discard
> [ 2000.172658] EXT4-fs (dm-1): mounted filesystem with ordered data
> mode. Opts: discard
> [ 2001.214202] EXT4-fs (sda1): mounted filesystem with ordered data
> mode. Opts: discard
> [2010.7] Closing the overlay
> [2010.7] Checking if the guest needs BIOS or UEFI to boot
> [2010.7] Assigning disks to buses
> [2010.7] Copying disk 1/1 to
> /rhev/data-center/e8263fb4-114d-4706-b1c0-5defcd15d16b/a118578a-4cf2-4e0c-ac47-20e9f0321da1/images/1a93e503-ce57-4631-8dd2-eeeae45866ca/88d92582-0f53-43b0-89ff-af1c17ea8618
> (raw)
> [7000.4] Creating output metadata
> [7000.4] Finishing off
>
> Any help is appreciated.
>
> Luca
>
>
>
> --
> "E' assurdo impiegare gli uomini di intelligenza eccellente per fare
> calcoli che potrebbero essere affidati a chiunque se si usassero delle
> macchine"
> Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716)
>
> "Internet è la più grande biblioteca del mondo.
> Ma il problema è che i libri sono tutti sparsi sul pavimento"
> John Allen Paulos, Matematico (1945-vivente)
>
> Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
6 years, 9 months
[PATCH] daemon: build also without Hivex.OPEN_UNSAFE (RHBZ#1493048)
by Pino Toscano
Do a configure check for the OPEN_UNSAFE flag in the OCaml binding of
Hivex, using it only when available. This makes it possible to use
hivex < 1.3.14 to build libguestfs (the daemon, actually).
Amend the building documentation accordingly.
---
.gitignore | 1 +
configure.ac | 1 +
daemon/Makefile.am | 2 ++
daemon/config_daemon.ml.in | 20 ++++++++++++++++++++
daemon/config_daemon.mli | 19 +++++++++++++++++++
daemon/inspect_utils.ml | 2 +-
docs/guestfs-building.pod | 2 +-
m4/guestfs-ocaml.m4 | 19 +++++++++++++++++++
8 files changed, 64 insertions(+), 2 deletions(-)
create mode 100644 daemon/config_daemon.ml.in
create mode 100644 daemon/config_daemon.mli
diff --git a/.gitignore b/.gitignore
index 8276afb26..59d7278be 100644
--- a/.gitignore
+++ b/.gitignore
@@ -186,6 +186,7 @@ Makefile.in
/daemon/actions.h
/daemon/callbacks.ml
/daemon/caml-stubs.c
+/daemon/config_daemon.ml
/daemon/daemon_utils_tests
/daemon/dispatch.c
/daemon/guestfsd
diff --git a/configure.ac b/configure.ac
index daf9abf6f..fbba5ab65 100644
--- a/configure.ac
+++ b/configure.ac
@@ -247,6 +247,7 @@ AC_CONFIG_FILES([Makefile
common/windows/Makefile
csharp/Makefile
customize/Makefile
+ daemon/config_daemon.ml
daemon/Makefile
df/Makefile
dib/Makefile
diff --git a/daemon/Makefile.am b/daemon/Makefile.am
index 994bcd61a..4ac4e38d8 100644
--- a/daemon/Makefile.am
+++ b/daemon/Makefile.am
@@ -250,6 +250,7 @@ SOURCES_MLI = \
btrfs.mli \
callbacks.mli \
chroot.mli \
+ config_daemon.mli \
daemon.mli \
devsparts.mli \
file.mli \
@@ -279,6 +280,7 @@ SOURCES_MLI = \
utils.mli
SOURCES_ML = \
+ config_daemon.ml \
utils.ml \
structs.ml \
optgroups.ml \
diff --git a/daemon/config_daemon.ml.in b/daemon/config_daemon.ml.in
new file mode 100644
index 000000000..e3ee1fd3f
--- /dev/null
+++ b/daemon/config_daemon.ml.in
@@ -0,0 +1,20 @@
+(* guestfsd
+ * @configure_input@
+ * Copyright (C) 2018 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *)
+
+let hivex_flag_unsafe = [@HIVEX_OPEN_UNSAFE_FLAG@]
diff --git a/daemon/config_daemon.mli b/daemon/config_daemon.mli
new file mode 100644
index 000000000..1d358b7fd
--- /dev/null
+++ b/daemon/config_daemon.mli
@@ -0,0 +1,19 @@
+(* guestfsd
+ * Copyright (C) 2018 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *)
+
+val hivex_flag_unsafe : Hivex.open_flag list
diff --git a/daemon/inspect_utils.ml b/daemon/inspect_utils.ml
index 5127bf30f..b2ce072d6 100644
--- a/daemon/inspect_utils.ml
+++ b/daemon/inspect_utils.ml
@@ -176,7 +176,7 @@ let parse_version_from_major_minor str data =
)
let with_hive hive_filename f =
- let flags = [ Hivex.OPEN_UNSAFE ] in
+ let flags = Config_daemon.hivex_flag_unsafe in
let flags = if verbose () then Hivex.OPEN_VERBOSE :: flags else flags in
let h = Hivex.open_file hive_filename flags in
protect ~f:(fun () -> f h (Hivex.root h)) ~finally:(fun () -> Hivex.close h)
diff --git a/docs/guestfs-building.pod b/docs/guestfs-building.pod
index e77e47454..de5d77050 100644
--- a/docs/guestfs-building.pod
+++ b/docs/guestfs-building.pod
@@ -178,7 +178,7 @@ I<Required>.
I<Required> if compiling from git.
Optional if compiling from tarball.
-=item hivex E<ge> 1.3.14
+=item hivex
=item ocaml-hivex
diff --git a/m4/guestfs-ocaml.m4 b/m4/guestfs-ocaml.m4
index e72b5ad39..5ceeaf976 100644
--- a/m4/guestfs-ocaml.m4
+++ b/m4/guestfs-ocaml.m4
@@ -79,6 +79,7 @@ else
fi
AC_SUBST([OCAMLDEP_ONE_LINE])
+have_Hivex_OPEN_UNSAFE=no
if test "x$enable_daemon" = "xyes"; then
OCAML_PKG_hivex=no
AC_CHECK_OCAML_PKG(hivex)
@@ -86,6 +87,18 @@ if test "x$enable_daemon" = "xyes"; then
AC_MSG_ERROR([the OCaml module 'hivex' is required])
fi
+ # Check if Hivex has 'OPEN_UNSAFE' flag.
+ AC_MSG_CHECKING([for Hivex.OPEN_UNSAFE])
+ rm -f conftest.ml
+ echo 'let s = Hivex.OPEN_UNSAFE' > conftest.ml
+ if $OCAMLFIND ocamlc -package hivex -c conftest.ml >&5 2>&5 ; then
+ AC_MSG_RESULT([yes])
+ have_Hivex_OPEN_UNSAFE=yes
+ else
+ AC_MSG_RESULT([no])
+ have_Hivex_OPEN_UNSAFE=no
+ fi
+
dnl Check which OCaml runtime to link the daemon again.
dnl We can't use AC_CHECK_LIB here unfortunately because
dnl the other symbols are resolved by OCaml itself.
@@ -182,6 +195,12 @@ AC_SUBST([OCAML_BYTES_COMPAT_CMO])
AC_SUBST([OCAML_BYTES_COMPAT_ML])
AM_CONDITIONAL([HAVE_BYTES_COMPAT_ML],
[test "x$OCAML_BYTES_COMPAT_ML" != "x"])
+AS_IF([test "x$have_Hivex_OPEN_UNSAFE" = "xno"],[
+ HIVEX_OPEN_UNSAFE_FLAG=""
+],[
+ HIVEX_OPEN_UNSAFE_FLAG=" Hivex.OPEN_UNSAFE "
+])
+AC_SUBST([HIVEX_OPEN_UNSAFE_FLAG])
dnl Flags we want to pass to every OCaml compiler call.
OCAML_WARN_ERROR="-warn-error CDEFLMPSUVYZX+52-3"
--
2.14.3
6 years, 9 months
[nbdkit PATCH] file: Add trim support
by Eric Blake
We already have support in the file driver for punching holes
during .zero with the may_trim flag (via FALLOC_FL_PUNCH_HOLE),
so we should use the same mechanism to support .trim. Note that
the NBD spec says that trim is advisory (we can return success
even if we did nothing); but at the same time, it's nicer to
avoid advertising the feature if we know for sure we can't do
it, so we also need .can_trim. Note that there's still an
element of runtime behavior, as FALLOC_FL_PUNCH_HOLE doesn't
work on all filesystems; there we fall back on the NBD
protocol allowing us to be advisory for all but a handful of
errno values that we can directly report back over NBD.
Signed-off-by: Eric Blake <eblake(a)redhat.com>
---
I couldn't test --filter=log results on trim commands without
at least one plugin that supports trim ;)
plugins/file/file.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 44 insertions(+), 3 deletions(-)
diff --git a/plugins/file/file.c b/plugins/file/file.c
index 1fe4191..081848b 100644
--- a/plugins/file/file.c
+++ b/plugins/file/file.c
@@ -1,5 +1,5 @@
/* nbdkit
- * Copyright (C) 2013 Red Hat Inc.
+ * Copyright (C) 2013-2018 Red Hat Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -175,6 +175,18 @@ file_get_size (void *handle)
return statbuf.st_size;
}
+static int
+file_can_trim (void *handle)
+{
+ /* Trim is advisory, but we prefer to advertise it only when we can
+ * actually (attempt to) punch holes. */
+#ifdef FALLOC_FL_PUNCH_HOLE
+ return 1;
+#else
+ return 0;
+#endif
+}
+
/* Read data from the file. */
static int
file_pread (void *handle, void *buf, uint32_t count, uint64_t offset)
@@ -219,7 +231,7 @@ file_pwrite (void *handle, const void *buf, uint32_t count, uint64_t offset)
return 0;
}
-/* Write data to the file. */
+/* Write zeroes to the file. */
static int
file_zero (void *handle, uint32_t count, uint64_t offset, int may_trim)
{
@@ -268,6 +280,33 @@ file_flush (void *handle)
return 0;
}
+/* Punch a hole in the file. */
+static int
+file_trim (void *handle, uint32_t count, uint64_t offset)
+{
+ int r = -1;
+#ifdef FALLOC_FL_PUNCH_HOLE
+ struct handle *h = handle;
+
+ /* Trim is advisory; we don't care if it fails for anything other
+ * than EIO or EPERM. */
+ r = fallocate (h->fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
+ offset, count);
+ if (r < 0) {
+ if (errno != EPERM && errno != EIO) {
+ nbdkit_debug ("ignoring failed fallocate during trim: %m");
+ r = 0;
+ }
+ else
+ nbdkit_error ("fallocate: %m");
+ }
+#else
+ /* Based on .can_trim, this should not be reached. */
+ errno = EOPNOTSUPP;
+#endif
+ return r;
+}
+
static struct nbdkit_plugin plugin = {
.name = "file",
.longname = "nbdkit file plugin",
@@ -279,10 +318,12 @@ static struct nbdkit_plugin plugin = {
.open = file_open,
.close = file_close,
.get_size = file_get_size,
+ .can_trim = file_can_trim,
.pread = file_pread,
.pwrite = file_pwrite,
- .zero = file_zero,
.flush = file_flush,
+ .trim = file_trim,
+ .zero = file_zero,
.errno_is_preserved = 1,
};
--
2.14.3
6 years, 9 months
[nbdkit PATCH] tests: test-single: create the fake disk
by Pino Toscano
Make sure the fake disk exist, otherwise nbdkit fails. Also, give the
fake disk a less generic file name.
---
tests/test-single.sh | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/tests/test-single.sh b/tests/test-single.sh
index d60538d..9dc462b 100755
--- a/tests/test-single.sh
+++ b/tests/test-single.sh
@@ -45,11 +45,13 @@ if ! qemu-img --help >/dev/null; then
exit 77
fi
-files="single.sock"
+files="single.sock single.disk"
rm -f $files
+truncate -s 1G single.disk
+
socat unix-listen:single.sock,reuseaddr,fork \
- exec:'nbdkit -r -s file file=disk' &
+ exec:'nbdkit -r -s file file=single.disk' &
pid=$!
cleanup ()
--
2.14.3
6 years, 9 months
[PATCH] customize: allow missing SELINUXTYPE in SELinux config
by Pino Toscano
libselinux defaults to "targeted" when no SELINUXTYPE is specified in
/etc/config/selinux. Hence do the same here, instead of failing because
of the missing key.
Add a slow test for checking SELinux relabeling on a Fedora 27 guest,
both with no changes, and with a modified configuration.
---
customize/Makefile.am | 2 ++
customize/SELinux_relabel.ml | 14 ++++++++++--
customize/test-selinuxrelabel.sh | 49 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 63 insertions(+), 2 deletions(-)
create mode 100755 customize/test-selinuxrelabel.sh
diff --git a/customize/Makefile.am b/customize/Makefile.am
index a22e25c46..7f18b2fc3 100644
--- a/customize/Makefile.am
+++ b/customize/Makefile.am
@@ -23,6 +23,7 @@ EXTRA_DIST = \
customize_main.ml \
test-firstboot.sh \
test-password.pl \
+ test-selinuxrelabel.sh \
test-settings.sh \
test-virt-customize.sh \
test-virt-customize-docs.sh \
@@ -225,6 +226,7 @@ check-valgrind:
SLOW_TESTS = \
$(firstboot_test_scripts) \
$(password_test_scripts) \
+ test-selinuxrelabel.sh \
$(settings_test_scripts)
check-slow:
diff --git a/customize/SELinux_relabel.ml b/customize/SELinux_relabel.ml
index d404c35fa..e7d440c29 100644
--- a/customize/SELinux_relabel.ml
+++ b/customize/SELinux_relabel.ml
@@ -37,8 +37,18 @@ let relabel (g : G.guestfs) =
g#aug_load ();
debug_augeas_errors g;
- (* Get the SELinux policy name, eg. "targeted", "minimum". *)
- let policy = g#aug_get "/files/etc/selinux/config/SELINUXTYPE" in
+ (* Get the SELinux policy name, eg. "targeted", "minimum".
+ * Use "targeted" if not specified, just like libselinux does.
+ *)
+ let policy =
+ let config_path = "/files/etc/selinux/config" in
+ let selinuxtype_path = config_path ^ "/SELINUXTYPE" in
+ let keys = g#aug_ls config_path in
+ if Array.mem selinuxtype_path keys then
+ g#aug_get selinuxtype_path
+ else
+ "targeted" in
+
g#aug_close ();
(* Get the spec file name. *)
diff --git a/customize/test-selinuxrelabel.sh b/customize/test-selinuxrelabel.sh
new file mode 100755
index 000000000..d13c0356c
--- /dev/null
+++ b/customize/test-selinuxrelabel.sh
@@ -0,0 +1,49 @@
+#!/bin/bash -
+# Test SELinux relabel functionality.
+# Copyright (C) 2018 Red Hat Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+# This slow test checks that SELinux relabel works.
+
+set -e
+
+$TEST_FUNCTIONS
+slow_test
+
+guestname="fedora-27"
+
+disk="selinuxrelabel.img"
+disk_overlay="selinuxrelabel-overlay.qcow2"
+rm -f "$disk"
+
+skip_unless_virt_builder_guest "$guestname"
+
+# Build a guest (using virt-builder).
+virt-builder "$guestname" --quiet -o "$disk"
+
+# Test #1: relabel with the default configuration works.
+rm -f "$disk_overlay"
+guestfish -- disk-create "$disk_overlay" qcow2 -1 backingfile:"$disk"
+virt-customize -a "$disk" --selinux-relabel
+
+# Test #2: relabel with no SELINUXTYPE in the configuration.
+rm -f "$disk_overlay"
+guestfish -- disk-create "$disk_overlay" qcow2 -1 backingfile:"$disk"
+virt-customize -a "$disk" \
+ --edit /etc/selinux/config:"s,^SELINUXTYPE=,#&,g" \
+ --selinux-relabel
+
+rm "$disk" "$disk_overlay"
--
2.14.3
6 years, 9 months
[PATCH] customize: Correctly handle crypt(3) returning NULL.
by Richard W.M. Jones
In particular glibc's crypt will return NULL / errno == ENOSYS and
other implementations might do that in future too.
---
customize/crypt-c.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/customize/crypt-c.c b/customize/crypt-c.c
index d5425cfaa..e358018cd 100644
--- a/customize/crypt-c.c
+++ b/customize/crypt-c.c
@@ -21,6 +21,7 @@
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
+#include <errno.h>
#if HAVE_CRYPT_H
#include <crypt.h>
@@ -29,6 +30,7 @@
#include <caml/alloc.h>
#include <caml/memory.h>
#include <caml/mlvalues.h>
+#include <caml/unixsupport.h>
#pragma GCC diagnostic ignored "-Wmissing-prototypes"
@@ -44,6 +46,8 @@ virt_customize_crypt (value keyv, value saltv)
* is not thread safe.
*/
r = crypt (String_val (keyv), String_val (saltv));
+ if (r == NULL)
+ unix_error (errno, (char *) "crypt", Nothing);
rv = caml_copy_string (r);
CAMLreturn (rv);
--
2.13.2
6 years, 10 months
[nbdkit PATCH 0/2] RFC: tweak error handling, add log filter
by Eric Blake
Here's what I'm currently playing with; I'm not ready to commit
anything until I rebase my FUA work on top of this, as I only
want to break filter ABI once between releases.
Eric Blake (2):
backend: Rework internal/filter error return semantics
filters: Add log filter
TODO | 2 -
docs/nbdkit-filter.pod | 84 +++++++--
docs/nbdkit.pod | 1 +
filters/log/nbdkit-log-filter.pod | 117 +++++++++++++
configure.ac | 1 +
src/internal.h | 1 -
src/connections.c | 45 ++---
src/filters.c | 81 +++++----
src/plugins.c | 66 +++----
filters/cache/cache.c | 49 ++++--
filters/cow/cow.c | 28 +--
filters/log/log.c | 357 ++++++++++++++++++++++++++++++++++++++
filters/partition/partition.c | 2 +-
filters/Makefile.am | 1 +
filters/log/Makefile.am | 62 +++++++
15 files changed, 761 insertions(+), 136 deletions(-)
create mode 100644 filters/log/nbdkit-log-filter.pod
create mode 100644 filters/log/log.c
create mode 100644 filters/log/Makefile.am
--
2.14.3
6 years, 10 months
