This refactoring takes the nbdkit-specific code from the ‘-it vddk’ mode and puts it into a separate module. The idea is to reuse this module (in future commits) to support ssh, curl and rate limiting. This refactoring is not quite neutral because it moves some of the prechecking into the Nbdkit.create function. This means it will happen a little bit later in the cycle (in input#source instead of input#precheck - refer to the diagram in v2v/types.mli). However it's still almost in the same place and importantly still happens before we start copying. --- v2v/Makefile.am | 2 + v2v/input_libvirt_vddk.ml | 289 ++++++-------------------------------- v2v/nbdkit.ml | 280 ++++++++++++++++++++++++++++++++++++ v2v/nbdkit.mli | 47 +++++++ 4 files changed, 373 insertions(+), 245 deletions(-) diff --git a/v2v/Makefile.am b/v2v/Makefile.am index 277b95c31..1bf848abb 100644 --- a/v2v/Makefile.am +++ b/v2v/Makefile.am @@ -73,6 +73,7 @@ SOURCES_MLI = \ measure_disk.mli \ modules_list.mli \ name_from_disk.mli \ + nbdkit.mli \ networks.mli \ openstack_image_properties.mli \ output_glance.mli \ @@ -112,6 +113,7 @@ SOURCES_ML = \ var_expander.ml \ python_script.ml \ name_from_disk.ml \ + nbdkit.ml \ vCenter.ml \ libvirt_utils.ml \ DOM.ml \ diff --git a/v2v/input_libvirt_vddk.ml b/v2v/input_libvirt_vddk.ml index a8e4fd5ac..1f54ee511 100644 --- a/v2v/input_libvirt_vddk.ml +++ b/v2v/input_libvirt_vddk.ml @@ -18,8 +18,6 @@ (** [-i libvirt] when the source is VMware via nbdkit vddk plugin *) -open Unix - open Common_gettext.Gettext open Tools_utils open Std_utils @@ -95,115 +93,16 @@ let parse_input_options options = (* Subclass specialized for handling VMware via nbdkit vddk plugin. *) class input_libvirt_vddk libvirt_conn input_conn input_password vddk_options parsed_uri guest = - (* The VDDK path. *) - let libdir = - try Some (List.assoc "libdir" vddk_options) - with Not_found -> None in - - (* VDDK libraries are located under lib32/ or lib64/ relative to the - * libdir. Note this is unrelated to Linux multilib or multiarch. - *) - let libNN = sprintf "lib%d" Sys.word_size in - - (* Compute the LD_LIBRARY_PATH that we may have to pass to nbdkit. *) - let library_path = Option.map (fun libdir -> libdir // libNN) libdir in - - (* Check that the VDDK path looks reasonable. *) - let error_unless_vddk_libdir () = - (match libdir with - | None -> () - | Some libdir -> - if not (is_directory libdir) then - error (f_"‘-io vddk-libdir=%s’ does not point to a directory. See the virt-v2v-input-vmware(1) manual.") libdir - ); - - (match library_path with - | None -> () - | Some library_path -> - if not (is_directory library_path) then - error (f_"VDDK library path %s not found or not a directory. See the virt-v2v-input-vmware(1) manual.") library_path - ) - in - - (* Check that nbdkit is available and new enough. *) - let error_unless_nbdkit_working () = - if 0 <> Sys.command "nbdkit --version >/dev/null" then - error (f_"nbdkit is not installed or not working. It is required to use ‘-it vddk’. See the virt-v2v-input-vmware(1) manual."); - - (* Check it's a new enough version. The latest features we - * require are ‘--exit-with-parent’ and ‘--selinux-label’, both - * added in 1.1.14. (We use 1.1.16 as the minimum here because - * it also adds the selinux=yes|no flag in --dump-config). - *) - let lines = external_command "nbdkit --help" in - let lines = String.concat " " lines in - if String.find lines "exit-with-parent" == -1 || - String.find lines "selinux-label" == -1 then - error (f_"nbdkit is not new enough, you need to upgrade to nbdkit ≥ 1.1.16") - in - - (* Check that the VDDK plugin is installed and working *) - let error_unless_nbdkit_vddk_working () = - let set_ld_library_path = - match library_path with - | None -> "" - | Some library_path -> - sprintf "LD_LIBRARY_PATH=%s " (quote library_path) in - - let cmd = - sprintf "%snbdkit vddk --dump-plugin >/dev/null" - set_ld_library_path in - if Sys.command cmd <> 0 then ( - (* See if we can diagnose why ... *) - let cmd = - sprintf "LANG=C %snbdkit vddk --dump-plugin 2>&1 | - grep -sq \"cannot open shared object file\"" - set_ld_library_path in - let needs_library = Sys.command cmd = 0 in - if not needs_library then - error (f_"nbdkit VDDK plugin is not installed or not working. It is required if you want to use VDDK. - -The VDDK plugin is not enabled by default when you compile nbdkit. You have to read the instructions in the nbdkit sources under ‘plugins/vddk/README.VDDK’ to find out how to enable the VDDK plugin. - -See also the virt-v2v-input-vmware(1) manual.") - else - error (f_"nbdkit VDDK plugin is not installed or not working. It is required if you want to use VDDK. - -It looks like you did not set the right path in the ‘-io vddk-libdir’ option, or your copy of the VDDK directory is incomplete. There should be a library called ’<libdir>/%s/libvixDiskLib.so.?’. - -See also the virt-v2v-input-vmware(1) manual.") libNN - ) - in - let error_unless_thumbprint () = if not (List.mem_assoc "thumbprint" vddk_options) then error (f_"You must pass the ‘-io vddk-thumbprint’ option with the SSL thumbprint of the VMware server. To find the thumbprint, see the nbdkit-vddk-plugin(1) manual. See also the virt-v2v-input-vmware(1) manual.") in - (* Check that nbdkit was compiled with SELinux support (for the - * --selinux-label option). - *) - let error_unless_nbdkit_compiled_with_selinux () = - let lines = external_command "nbdkit --dump-config" in - (* In nbdkit <= 1.1.15 the selinux attribute was not present - * at all in --dump-config output so there was no way to tell. - * Ignore this case because there will be an error later when - * we try to use the --selinux-label parameter. - *) - if List.mem "selinux=no" (List.map String.trim lines) then - error (f_"nbdkit was compiled without SELinux support. You will have to recompile nbdkit with libselinux-devel installed, or else set SELinux to Permissive mode while doing the conversion.") - in - object (self) inherit input_libvirt libvirt_conn guest as super method precheck () = - error_unless_vddk_libdir (); - error_unless_nbdkit_working (); - error_unless_nbdkit_vddk_working (); - error_unless_thumbprint (); - if have_selinux then - error_unless_nbdkit_compiled_with_selinux () + error_unless_thumbprint () method as_options = let pt_options = @@ -231,79 +130,40 @@ object (self) | None -> error (f_"<vmware:moref> was not found in the output of ‘virsh dumpxml \"%s\"’. The most likely reason is that libvirt is too old, try upgrading libvirt to ≥ 3.7.") guest in - (* Create a temporary directory where we place the sockets. *) - let tmpdir = - let base_dir = (open_guestfs ())#get_cachedir () in - let t = Mkdtemp.temp_dir ~base_dir "vddk." in - (* tmpdir must be readable (but not writable) by "other" so that - * qemu can open the sockets. - *) - chmod t 0o755; - rmdir_on_exit t; - t in - - (* Start constructing the parts of the incredibly long nbdkit - * command line which don't change between disks. + (* It probably never happens that the server name can be missing + * from the libvirt URI, but we need a server name to pass to + * nbdkit, so ... *) - let args = - let add_arg, get_args = - let args = ref [] in - let add_arg a = List.push_front a args in - let get_args () = List.rev !args in - add_arg, get_args in + let server = + match parsed_uri.Xml.uri_server with + | Some server -> server + | None -> + match input_conn with + | Some input_conn -> + error (f_"‘-ic %s’ URL does not contain a host name field") + input_conn + | None -> + error (f_"you must use the ‘-ic’ parameter. See the virt-v2v-input-vmware(1) manual.") in - (* It probably never happens that the server name can be missing - * from the libvirt URI, but we need a server name to pass to - * nbdkit, so ... - *) - let server = - match parsed_uri.Xml.uri_server with - | Some server -> server - | None -> - match input_conn with - | Some input_conn -> - error (f_"‘-ic %s’ URL does not contain a host name field") - input_conn - | None -> - error (f_"you must use the ‘-ic’ parameter. See the virt-v2v-input-vmware(1) manual.") in + let user = parsed_uri.Xml.uri_user in - (* Similar to above, we also need a username to pass. *) - let user = - match parsed_uri.Xml.uri_user with - | Some user -> user - | None -> "root" (* ? *) in - - add_arg "nbdkit"; - if verbose () then add_arg "--verbose"; - add_arg "--readonly"; (* important! readonly mode *) - add_arg "--foreground"; (* run in foreground *) - add_arg "--exit-with-parent"; (* exit when virt-v2v exits *) - add_arg "--newstyle"; (* use newstyle NBD protocol *) - add_arg "--exportname"; add_arg "/"; - if have_selinux then ( (* label the socket so qemu can open it *) - add_arg "--selinux-label"; add_arg "system_u:object_r:svirt_socket_t:s0" - ); - - (* Name of the plugin. Everything following is a plugin parameter. *) - add_arg "vddk"; - - let password_param = - match input_password with - | None -> - (* nbdkit asks for the password interactively *) - "password=-" - | Some password_file -> - (* nbdkit reads the password from the file *) - "password=+" ^ password_file in - add_arg (sprintf "server=%s" server); - add_arg (sprintf "user=%s" user); - add_arg password_param; - add_arg (sprintf "vm=moref=%s" moref); - - (* The passthrough parameters. *) - List.iter (fun (k, v) -> add_arg (sprintf "%s=%s" k v)) vddk_options; - - get_args () in + let config = + try Some (List.assoc "config" vddk_options) with Not_found -> None in + let cookie = + try Some (List.assoc "cookie" vddk_options) with Not_found -> None in + let libdir = + try Some (List.assoc "libdir" vddk_options) with Not_found -> None in + let nfchostport = + try Some (List.assoc "nfchostport" vddk_options) with Not_found -> None in + let port = + try Some (List.assoc "port" vddk_options) with Not_found -> None in + let snapshot = + try Some (List.assoc "snapshot" vddk_options) with Not_found -> None in + let thumbprint = + try List.assoc "thumbprint" vddk_options + with Not_found -> assert false (* checked in precheck method *) in + let transports = + try Some (List.assoc "transports" vddk_options) with Not_found -> None in (* Create an nbdkit instance for each disk and rewrite the source * paths to point to the NBD socket. @@ -322,79 +182,18 @@ object (self) * directly as the nbdkit file= parameter, and it is passed * directly in this form to VDDK. *) - - let sock = tmpdir // sprintf "nbdkit%d.sock" disk.s_disk_id in - let qemu_uri = sprintf "nbd:unix:%s:exportname=/" sock in - - let pidfile = tmpdir // sprintf "nbdkit%d.pid" disk.s_disk_id in - - (* Construct the final command line with the "static" args - * above plus the args which vary for each disk. - *) - let args = - args @ [ "--pidfile"; pidfile; - "--unix"; sock; - sprintf "file=%s" path ] in - - (* Print the full command we are about to run when debugging. *) - if verbose () then ( - eprintf "running nbdkit:\n"; - Option.may (eprintf "LD_LIBRARY_PATH=%s") library_path; - List.iter (fun arg -> eprintf " %s" (quote arg)) args; - prerr_newline () - ); - - (* Start an nbdkit instance in the background. By using - * --exit-with-parent we don't have to worry about cleaning - * it up, hopefully. - *) - let args = Array.of_list args in - let pid = fork () in - if pid = 0 then ( - (* Child process (nbdkit). *) - Option.may (putenv "LD_LIBRARY_PATH") library_path; - execvp "nbdkit" args - ); - - (* Wait for the pidfile to appear so we know that nbdkit - * is listening for requests. - *) - if not (wait_for_file pidfile 30) then ( - if verbose () then - error (f_"nbdkit did not start up. See previous debugging messages for problems.") - else - error (f_"nbdkit did not start up. There may be errors printed by nbdkit above. - -If the messages above are not sufficient to diagnose the problem then add the ‘virt-v2v -v -x’ options and examine the debugging output carefully.") - ); - - if have_selinux then ( - (* Note that Unix domain sockets have both a file label and - * a socket/process label. Using --selinux-label above - * only set the socket label, but we must also set the file - * label. - *) - ignore ( - run_command ["chcon"; "system_u:object_r:svirt_image_t:s0"; - sock] - ); - ); - (* ... and the regular Unix permissions, in case qemu is - * running as another user. - *) - chmod sock 0o777; - - (* nbdkit from a vddk source always presents us with the raw - * disk blocks from the guest, so force the format to raw here. - *) - { disk with s_qemu_uri = qemu_uri; - s_format = Some "raw" } - ) disks in - - if verbose () then ( - eprintf "vddk: tmpdir %s:\n%!" tmpdir; - ignore (Sys.command (sprintf "ls -laZ %s" (quote tmpdir))) - ); + let nbdkit = + Nbdkit.create_vddk ?config ?cookie ?libdir ~moref + ?nfchostport ?password_file:input_password ?port + ~server ?snapshot ~thumbprint ?transports ?user + path in + let qemu_uri = Nbdkit.run nbdkit in + + (* nbdkit always presents us with the raw disk blocks from + * the guest, so force the format to raw here. + *) + { disk with s_qemu_uri = qemu_uri; s_format = Some "raw" } + ) disks in { source with s_disks = disks } end diff --git a/v2v/nbdkit.ml b/v2v/nbdkit.ml new file mode 100644 index 000000000..6bf38daa0 --- /dev/null +++ b/v2v/nbdkit.ml @@ -0,0 +1,280 @@ +(* virt-v2v + * Copyright (C) 2009-2019 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +open Unix +open Printf + +open Common_gettext.Gettext +open Std_utils +open Tools_utils +open Unix_utils + +open Utils + +type t = { + (* The nbdkit plugin name. *) + plugin_name : string; + + (* Parameters (includes the plugin name). *) + args : string list; + + (* Environment variables that may be needed for nbdkit to work. *) + env : (string * string) list; +} + +(* Check that nbdkit is available and new enough. *) +let error_unless_nbdkit_working () = + if 0 <> Sys.command "nbdkit --version >/dev/null" then + error (f_"nbdkit is not installed or not working"); + + (* Check it's a new enough version. The latest features we + * require are ‘--exit-with-parent’ and ‘--selinux-label’, both + * added in 1.1.14. (We use 1.1.16 as the minimum here because + * it also adds the selinux=yes|no flag in --dump-config). + *) + let lines = external_command "nbdkit --help" in + let lines = String.concat " " lines in + if String.find lines "exit-with-parent" == -1 || + String.find lines "selinux-label" == -1 then + error (f_"nbdkit is not new enough, you need to upgrade to nbdkit ≥ 1.1.16") + +(* Check that nbdkit was compiled with SELinux support (for the + * --selinux-label option). + *) +let error_unless_nbdkit_compiled_with_selinux () = + if have_selinux then ( + let lines = external_command "nbdkit --dump-config" in + (* In nbdkit <= 1.1.15 the selinux attribute was not present + * at all in --dump-config output so there was no way to tell. + * Ignore this case because there will be an error later when + * we try to use the --selinux-label parameter. + *) + if List.mem "selinux=no" (List.map String.trim lines) then + error (f_"nbdkit was compiled without SELinux support. You will have to recompile nbdkit with libselinux-devel installed, or else set SELinux to Permissive mode while doing the conversion.") + ) + +let common_create plugin_name plugin_args plugin_env = + error_unless_nbdkit_working (); + error_unless_nbdkit_compiled_with_selinux (); + + (* Start constructing the parts of the incredibly long nbdkit + * command line which don't change between disks. + *) + let add_arg, get_args = + let args = ref [] in + let add_arg a = List.push_front a args in + let get_args () = List.rev !args in + add_arg, get_args in + + add_arg "nbdkit"; + if verbose () then add_arg "--verbose"; + add_arg "--readonly"; (* important! readonly mode *) + add_arg "--foreground"; (* run in foreground *) + add_arg "--exit-with-parent"; (* exit when virt-v2v exits *) + add_arg "--newstyle"; (* use newstyle NBD protocol *) + add_arg "--exportname"; add_arg "/"; + if have_selinux then ( (* label the socket so qemu can open it *) + add_arg "--selinux-label"; add_arg "system_u:object_r:svirt_socket_t:s0" + ); + let args = get_args () @ [ plugin_name ] @ plugin_args in + + (* Environment. We always add LANG=C. *) + let env = ("LANG", "C") :: plugin_env in + + { plugin_name; args; env } + +(* VDDK libraries are located under lib32/ or lib64/ relative to the + * libdir. Note this is unrelated to Linux multilib or multiarch. + *) +let libNN = sprintf "lib%d" Sys.word_size + +(* Create an nbdkit module specialized for reading from VDDK sources. *) +let create_vddk ?config ?cookie ?libdir ~moref + ?nfchostport ?password_file ?port + ~server ?snapshot ~thumbprint ?transports ?user path = + (* Compute the LD_LIBRARY_PATH that we may have to pass to nbdkit. *) + let ld_library_path = Option.map (fun libdir -> libdir // libNN) libdir in + + (* Check that the VDDK path looks reasonable. *) + let error_unless_vddk_libdir () = + (match libdir with + | None -> () + | Some libdir -> + if not (is_directory libdir) then + error (f_"‘-io vddk-libdir=%s’ does not point to a directory. See the virt-v2v-input-vmware(1) manual.") libdir + ); + + (match ld_library_path with + | None -> () + | Some ld_library_path -> + if not (is_directory ld_library_path) then + error (f_"VDDK library path %s not found or not a directory. See the virt-v2v-input-vmware(1) manual.") ld_library_path + ) + in + + (* Check that the VDDK plugin is installed and working *) + let error_unless_nbdkit_vddk_working () = + let set_ld_library_path = + match ld_library_path with + | None -> "" + | Some ld_library_path -> + sprintf "LD_LIBRARY_PATH=%s " (quote ld_library_path) in + + let cmd = + sprintf "%snbdkit vddk --dump-plugin >/dev/null" + set_ld_library_path in + if Sys.command cmd <> 0 then ( + (* See if we can diagnose why ... *) + let cmd = + sprintf "LANG=C %snbdkit vddk --dump-plugin 2>&1 | + grep -sq \"cannot open shared object file\"" + set_ld_library_path in + let needs_library = Sys.command cmd = 0 in + if not needs_library then + error (f_"nbdkit VDDK plugin is not installed or not working. It is required if you want to use VDDK. + +The VDDK plugin is not enabled by default when you compile nbdkit. You have to read the instructions in the nbdkit sources under ‘plugins/vddk/README.VDDK’ to find out how to enable the VDDK plugin. + +See also the virt-v2v-input-vmware(1) manual.") + else + error (f_"nbdkit VDDK plugin is not installed or not working. It is required if you want to use VDDK. + +It looks like you did not set the right path in the ‘-io vddk-libdir’ option, or your copy of the VDDK directory is incomplete. There should be a library called ’<libdir>/%s/libvixDiskLib.so.?’. + +See also the virt-v2v-input-vmware(1) manual.") libNN + ) + in + + error_unless_vddk_libdir (); + error_unless_nbdkit_vddk_working (); + + (* For VDDK we require some user. If it's not supplied, assume root. *) + let user = Option.default "root" user in + + let add_arg, get_args = + let args = ref [] in + let add_arg a = List.push_front a args in + let get_args () = List.rev !args in + add_arg, get_args in + + let password_param = + match password_file with + | None -> + (* nbdkit asks for the password interactively *) + "password=-" + | Some password_file -> + (* nbdkit reads the password from the file *) + "password=+" ^ password_file in + add_arg (sprintf "server=%s" server); + add_arg (sprintf "user=%s" user); + add_arg password_param; + add_arg (sprintf "vm=moref=%s" moref); + add_arg (sprintf "file=%s" path); + + (* The passthrough parameters. *) + Option.may (fun s -> add_arg (sprintf "config=%s" s)) config; + Option.may (fun s -> add_arg (sprintf "cookie=%s" s)) cookie; + Option.may (fun s -> add_arg (sprintf "libdir=%s" s)) libdir; + Option.may (fun s -> add_arg (sprintf "nfchostport=%s" s)) nfchostport; + Option.may (fun s -> add_arg (sprintf "port=%s" s)) port; + Option.may (fun s -> add_arg (sprintf "snapshot=%s" s)) snapshot; + add_arg (sprintf "thumbprint=%s" thumbprint); + Option.may (fun s -> add_arg (sprintf "transports=%s" s)) transports; + + let env = + match ld_library_path with + | None -> [] + | Some ld_library_path -> ["LD_LIBRARY_PATH", ld_library_path] in + + common_create "vddk" (get_args ()) env + +let run { args; env } = + (* Create a temporary directory where we place the sockets. *) + let tmpdir = + let base_dir = (open_guestfs ())#get_cachedir () in + let t = Mkdtemp.temp_dir ~base_dir "v2vnbdkit." in + (* tmpdir must be readable (but not writable) by "other" so that + * qemu can open the sockets. + *) + chmod t 0o755; + rmdir_on_exit t; + t in + + let id = unique () in + let sock = tmpdir // sprintf "nbdkit%d.sock" id in + let qemu_uri = sprintf "nbd:unix:%s:exportname=/" sock in + let pidfile = tmpdir // sprintf "nbdkit%d.pid" id in + + (* Construct the final command line with the "static" args + * above plus the pidfile and socket which vary for each run. + *) + let args = args @ [ "--pidfile"; pidfile; "--unix"; sock ] in + + (* Print the full command we are about to run when debugging. *) + if verbose () then ( + eprintf "running nbdkit:\n"; + List.iter (fun (k, v) -> eprintf " %s=%s" k v) env; + List.iter (fun arg -> eprintf " %s" (quote arg)) args; + prerr_newline () + ); + + (* Start an nbdkit instance in the background. By using + * --exit-with-parent we don't have to worry about cleaning + * it up, hopefully. + *) + let args = Array.of_list args in + let pid = fork () in + if pid = 0 then ( + (* Child process (nbdkit). *) + List.iter (fun (k, v) -> putenv k v) env; + execvp "nbdkit" args + ); + + (* Wait for the pidfile to appear so we know that nbdkit + * is listening for requests. + *) + if not (wait_for_file pidfile 30) then ( + if verbose () then + error (f_"nbdkit did not start up. See previous debugging messages for problems.") + else + error (f_"nbdkit did not start up. There may be errors printed by nbdkit above. + +If the messages above are not sufficient to diagnose the problem then add the ‘virt-v2v -v -x’ options and examine the debugging output carefully.") + ); + + if have_selinux then ( + (* Note that Unix domain sockets have both a file label and + * a socket/process label. Using --selinux-label above + * only set the socket label, but we must also set the file + * label. + *) + ignore ( + run_command ["chcon"; "system_u:object_r:svirt_image_t:s0"; sock] + ); + ); + (* ... and the regular Unix permissions, in case qemu is + * running as another user. + *) + chmod sock 0o777; + + if verbose () then ( + eprintf "nbdkit: tmpdir %s:\n%!" tmpdir; + ignore (Sys.command (sprintf "ls -laZ %s" (quote tmpdir))) + ); + + qemu_uri diff --git a/v2v/nbdkit.mli b/v2v/nbdkit.mli new file mode 100644 index 000000000..3bdec1b56 --- /dev/null +++ b/v2v/nbdkit.mli @@ -0,0 +1,47 @@ +(* virt-v2v + * Copyright (C) 2009-2019 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +(** nbdkit when used as a source. *) + +type t + +val create_vddk : ?config:string -> + ?cookie:string -> + ?libdir:string -> + moref:string -> + ?nfchostport:string -> + ?password_file:string -> + ?port:string -> + server:string -> + ?snapshot:string -> + thumbprint:string -> + ?transports:string -> + ?user:string -> + string -> t +(** Create a nbdkit object using the VDDK plugin. The required + string parameter is the disk remote path. + + This can fail (calling [error]) for a variety of reasons, such + as nbdkit not being available, wrong version, missing plugin, etc. + + Note this doesn't run nbdkit yet, it just creates the object. *) + +val run : t -> string +(** Start running nbdkit. + + Returns the QEMU URI that you can use to connect to this instance. *) -- 2.22.0

--- v2v/nbdkit.ml | 26 ++++++++++++++++++++++++++ v2v/nbdkit.mli | 18 ++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/v2v/nbdkit.ml b/v2v/nbdkit.ml index 8ae6549e9..44fe0e8e7 100644 --- a/v2v/nbdkit.ml +++ b/v2v/nbdkit.ml @@ -29,6 +29,11 @@ open Utils let nbdkit_min_version = (1, 2) let nbdkit_min_version_string = "1.2" +type password = +| NoPassword (* no password option at all *) +| AskForPassword (* password=- *) +| PasswordFile of string (* password=+file *) + type t = { (* The nbdkit plugin name. *) plugin_name : string; @@ -235,6 +240,27 @@ See also the virt-v2v-input-vmware(1) manual.") libNN common_create "vddk" (get_args ()) env +(* Create an nbdkit module specialized for reading from SSH sources. *) +let create_ssh ~password ?port ~server ?user path = + let add_arg, get_args = + let args = ref [] in + let add_arg a = List.push_front a args in + let get_args () = List.rev !args in + add_arg, get_args in + + add_arg (sprintf "host=%s" server); + Option.may (fun s -> add_arg (sprintf "port=%s" s)) port; + Option.may (fun s -> add_arg (sprintf "user=%s" s)) user; + (match password with + | NoPassword -> () + | AskForPassword -> add_arg "password=-" + | PasswordFile password_file -> + add_arg (sprintf "password=+%s" password_file) + ); + add_arg (sprintf "path=%s" path); + + common_create "ssh" (get_args ()) [] + let run { args; env } = (* Create a temporary directory where we place the sockets. *) let tmpdir = diff --git a/v2v/nbdkit.mli b/v2v/nbdkit.mli index 3bdec1b56..36faff03b 100644 --- a/v2v/nbdkit.mli +++ b/v2v/nbdkit.mli @@ -41,6 +41,24 @@ val create_vddk : ?config:string -> Note this doesn't run nbdkit yet, it just creates the object. *) +type password = +| NoPassword +| AskForPassword +| PasswordFile of string + +val create_ssh : password:password -> + ?port:string -> + server:string -> + ?user:string -> + string -> t +(** Create a nbdkit object using the SSH plugin. The required + string parameter is the remote path. + + This can fail (calling [error]) for a variety of reasons, such + as nbdkit not being available, wrong version, missing plugin, etc. + + Note this doesn't run nbdkit yet, it just creates the object. *) + val run : t -> string (** Start running nbdkit. -- 2.22.0

One immediately advantage is we can use libvirt again. --- v2v/input_vmx.ml | 32 +++++++------------------------- 1 file changed, 7 insertions(+), 25 deletions(-) diff --git a/v2v/input_vmx.ml b/v2v/input_vmx.ml index b169b2537..f521346e5 100644 --- a/v2v/input_vmx.ml +++ b/v2v/input_vmx.ml @@ -230,24 +230,14 @@ and qemu_uri_of_filename vmx_source filename = if remote_file_exists uri flat_vmdk then (flat_vmdk, "raw") else (abs_path, format) in - let json_params = [ - "file.driver", JSON.String "ssh"; - "file.path", JSON.String abs_path; - "file.host", JSON.String (server_of_uri uri); - "file.host_key_check", JSON.String "no"; - ] in - let json_params = - match uri.Xml.uri_user with - | None -> json_params - | Some user -> - ("file.user", JSON.String user) :: json_params in - let json_params = - match port_of_uri uri with - | None -> json_params - | Some port -> - ("file.port", JSON.Int (Int64.of_int port)) :: json_params in + let server = server_of_uri uri in + let port = Option.map string_of_int (port_of_uri uri) in + let user = uri.Xml.uri_user in - "json:" ^ JSON.string_of_doc json_params, format + let nbdkit = Nbdkit.create_ssh ~password:NoPassword ~server + ?port ?user abs_path in + let qemu_uri = Nbdkit.run nbdkit in + qemu_uri, format and absolute_path_from_other_file other_filename filename = if not (Filename.is_relative filename) then filename @@ -396,14 +386,6 @@ object method as_options = "-i vmx " ^ arg - method precheck () = - match input_transport with - | None -> () - | Some `SSH -> - if backend_is_libvirt () then - error (f_"because libvirtd doesn't pass the SSH_AUTH_SOCK environment variable to qemu you must set this environment variable:\n\nexport LIBGUESTFS_BACKEND=direct\n\nand then rerun the virt-v2v command."); - error_if_no_ssh_agent () - method source () = let vmx_source = vmx_source_of_arg input_transport arg in -- 2.22.0

The readahead filter is a self-configuring filter that makes sequential reads faster when the plugin is slow (and all of the plugins we use here are always slow). I observed the behaviour of the readahead filter with our qcow2 overlay when converting a guest from a vCenter source. Even when doing random reads, qemu issues 64K reads which happen to also be the minimum request size of the readahead filter, so there is no extra overhead. When doing the sequential copy the readahead filter performed better than qemu curl’s readahead because it scaled the prefetched data appropriately on long contiguous stretches and then shrunk it back to 64K around fragmented parts of the base image. --- v2v/nbdkit.ml | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/v2v/nbdkit.ml b/v2v/nbdkit.ml index 4bbb8f043..b2d77f963 100644 --- a/v2v/nbdkit.ml +++ b/v2v/nbdkit.ml @@ -49,6 +49,9 @@ type t = { (* nbdkit plugin_name --dump-plugin output. *) dump_plugin : (string * string) list; + + (* nbdkit directory containing the filters. *) + filterdir : string; } (* Check that nbdkit is available and new enough. *) @@ -105,6 +108,12 @@ let common_create plugin_name plugin_args plugin_env = error_unless_nbdkit_min_version dump_config; error_unless_nbdkit_compiled_with_selinux dump_config; + (* Get the filterdir. *) + let filterdir = + try List.assoc "filterdir" dump_config + with Not_found -> + error (f_"nbdkit --dump-config output did not contain filterdir") in + (* Get the nbdkit plugin_name --dump-plugin output, which also * checks that the plugin is available and loadable. *) @@ -133,9 +142,17 @@ let common_create plugin_name plugin_args plugin_env = if have_selinux then ( (* label the socket so qemu can open it *) add_arg "--selinux-label"; add_arg "system_u:object_r:svirt_socket_t:s0" ); + + (* Adding the readahead filter is always a win for our access + * patterns. However if it doesn't exist don't worry. + *) + if Sys.file_exists (filterdir // "nbdkit-readahead-filter.so") then ( + add_arg "--filter"; add_arg "readahead" + ); + let args = get_args () @ [ plugin_name ] @ plugin_args in - { plugin_name; args; env; dump_config; dump_plugin } + { plugin_name; args; env; dump_config; dump_plugin; filterdir } (* VDDK libraries are located under lib32/ or lib64/ relative to the * libdir. Note this is unrelated to Linux multilib or multiarch. -- 2.22.0

Because of the self-configuring readahead plugin we can entirely get rid of input#adjust_overlay_parameters, which is definitely a good thing. --- v2v/Makefile.am | 1 + v2v/input_libvirt_other.mli | 1 - v2v/input_libvirt_vcenter_https.ml | 47 +++--------------------------- v2v/types.ml | 1 - v2v/types.mli | 7 ----- v2v/v2v.ml | 7 ----- v2v/vCenter.ml | 43 +++++++-------------------- v2v/vCenter.mli | 4 +-- 8 files changed, 17 insertions(+), 94 deletions(-) diff --git a/v2v/Makefile.am b/v2v/Makefile.am index 1bf848abb..66a684348 100644 --- a/v2v/Makefile.am +++ b/v2v/Makefile.am @@ -271,6 +271,7 @@ COPY_TO_LOCAL_BOBJECTS = \ uefi.cmo \ utils.cmo \ libvirt_utils.cmo \ + nbdkit.cmo \ vCenter.cmo \ copy_to_local.cmo COPY_TO_LOCAL_XOBJECTS = $(COPY_TO_LOCAL_BOBJECTS:.cmo=.cmx) diff --git a/v2v/input_libvirt_other.mli b/v2v/input_libvirt_other.mli index 10f574281..d48987e46 100644 --- a/v2v/input_libvirt_other.mli +++ b/v2v/input_libvirt_other.mli @@ -24,7 +24,6 @@ class virtual input_libvirt : Libvirt.rw Libvirt.Connect.t Lazy.t -> string -> o method precheck : unit -> unit method as_options : string method virtual source : unit -> Types.source - method adjust_overlay_parameters : Types.overlay -> unit method private conn : Libvirt.rw Libvirt.Connect.t end diff --git a/v2v/input_libvirt_vcenter_https.ml b/v2v/input_libvirt_vcenter_https.ml index c7a00210e..bfe5e8e9d 100644 --- a/v2v/input_libvirt_vcenter_https.ml +++ b/v2v/input_libvirt_vcenter_https.ml @@ -30,17 +30,12 @@ open Input_libvirt_other open Printf -(* See RHBZ#1151033 and RHBZ#1153589. *) -let readahead_for_conversion = None -let readahead_for_copying = Some (64 * 1024 * 1024) - (* Subclass specialized for handling VMware vCenter over https. *) class input_libvirt_vcenter_https libvirt_conn input_password parsed_uri server guest = object (self) inherit input_libvirt libvirt_conn guest - val saved_source_paths = Hashtbl.create 13 val mutable dcPath = "" method precheck () = @@ -50,9 +45,9 @@ object (self) debug "input_libvirt_vcenter_https: source: server %s" server; (* Remove proxy environment variables so curl doesn't try to use - * them. Libvirt doesn't use the proxy anyway, and using a proxy - * is generally a bad idea because vCenter is slow enough as it is - * without putting another device in the way (RHBZ#1354507). + * them. Using a proxy is generally a bad idea because vCenter + * is slow enough as it is without putting another device in + * the way (RHBZ#1354507). *) unsetenv "https_proxy"; unsetenv "all_proxy"; @@ -77,28 +72,13 @@ object (self) error (f_"vcenter: <vmware:datacenterpath> was not found in the XML. You need to upgrade to libvirt ≥ 1.2.20.") ); - (* Save the original source paths, so that we can remap them again - * in [#adjust_overlay_parameters]. - *) - List.iter ( - function - | { p_source = P_source_dev _ } -> - (* Should never happen ... *) - error (f_"source disk has <source dev=...> attribute in XML") - | { p_source_disk = { s_disk_id = id }; p_source = P_dont_rewrite } -> - Hashtbl.add saved_source_paths id None - | { p_source_disk = { s_disk_id = id }; p_source = P_source_file path } -> - Hashtbl.add saved_source_paths id (Some path) - ) disks; - - let readahead = readahead_for_conversion in let disks = List.map ( function | { p_source = P_source_dev _ } -> assert false | { p_source_disk = disk; p_source = P_dont_rewrite } -> disk | { p_source_disk = disk; p_source = P_source_file path } -> let { VCenter.qemu_uri } = - VCenter.map_source ?readahead ?password_file:input_password + VCenter.map_source ?password_file:input_password dcPath parsed_uri server path in (* The libvirt ESX driver doesn't normally specify a format, but @@ -108,25 +88,6 @@ object (self) ) disks in { source with s_disks = disks } - - (* See RHBZ#1151033 and RHBZ#1153589 for why this is necessary. *) - method adjust_overlay_parameters overlay = - let orig_path = - try Hashtbl.find saved_source_paths overlay.ov_source.s_disk_id - with Not_found -> failwith "internal error in adjust_overlay_parameters" in - match orig_path with - | None -> () - | Some orig_path -> - let readahead = readahead_for_copying in - let { VCenter.qemu_uri = backing_qemu_uri } = - VCenter.map_source ?readahead ?password_file:input_password - dcPath parsed_uri server orig_path in - - (* Rebase the qcow2 overlay to adjust the readahead parameter. *) - let cmd = [ "qemu-img"; "rebase"; "-u"; "-b"; backing_qemu_uri; - overlay.ov_overlay_file ] in - if run_command cmd <> 0 then - warning (f_"qemu-img rebase failed (ignored)") end let input_libvirt_vcenter_https = new input_libvirt_vcenter_https diff --git a/v2v/types.ml b/v2v/types.ml index 77f879200..581f5466f 100644 --- a/v2v/types.ml +++ b/v2v/types.ml @@ -510,7 +510,6 @@ class virtual input = object method precheck () = () method virtual as_options : string method virtual source : unit -> source - method adjust_overlay_parameters (_ : overlay) = () end class virtual output = object diff --git a/v2v/types.mli b/v2v/types.mli index be9406100..1441c0109 100644 --- a/v2v/types.mli +++ b/v2v/types.mli @@ -384,10 +384,6 @@ type output_allocation = Sparse | Preallocated │ │ ▼ - input#adjust_overlay_parameters Optional method for adjusting - │ QEMU overlay parameters ready for copying - │ (eg. using a larger readahead setting). - ▼ copying Guest data is copied to the target disks by running ‘qemu-img convert’. v} @@ -404,9 +400,6 @@ class virtual input : object This is just used for pretty-printing log messages. *) method virtual source : unit -> source (** Examine the source hypervisor and create a source struct. *) - method adjust_overlay_parameters : overlay -> unit - (** Called just before copying to allow the input module to adjust - parameters of the overlay disk. *) end (** Encapsulates all [-i], etc input arguments as an object. *) diff --git a/v2v/v2v.ml b/v2v/v2v.ml index c056aa787..e2e6269f5 100644 --- a/v2v/v2v.ml +++ b/v2v/v2v.ml @@ -700,13 +700,6 @@ and copy_targets cmdline targets input output = if not ((open_guestfs ())#disk_has_backing_file overlay_file) then error (f_"internal error: qemu corrupted the overlay file"); - (* Give the input module a chance to adjust the parameters - * of the overlay/backing file. This allows us to increase - * the readahead parameter when copying (see RHBZ#1151033 and - * RHBZ#1153589 for the gruesome details). - *) - input#adjust_overlay_parameters t.target_overlay; - (match t.target_file with | TargetFile filename -> (* It turns out that libguestfs's disk creation code is diff --git a/v2v/vCenter.ml b/v2v/vCenter.ml index b1b9f9b15..2563ad0ed 100644 --- a/v2v/vCenter.ml +++ b/v2v/vCenter.ml @@ -35,7 +35,7 @@ type remote_resource = { let source_re = PCRE.compile "^\\[(.*)\\] (.*)\\.vmdk$" let snapshot_re = PCRE.compile "^(.*)-\\d{6}(\\.vmdk)$" -let rec map_source ?readahead ?password_file dcPath uri server path = +let rec map_source ?password_file dcPath uri server path = (* If no_verify=1 was passed in the libvirt URI, then we have to * turn off certificate verification here too. *) @@ -72,38 +72,15 @@ let rec map_source ?readahead ?password_file dcPath uri server path = let session_cookie = get_session_cookie password_file uri sslverify https_url in - let qemu_uri = - (* Construct the JSON parameters for the qemu URI. *) - let json_params = [ - "file.driver", JSON.String "https"; - "file.url", JSON.String https_url; - (* https://bugzilla.redhat.com/show_bug.cgi?id=1146007#c10 *) - "file.timeout", JSON.Int 2000_L; - ] in - - let json_params = - match readahead with - | None -> json_params - | Some readahead -> - ("file.readahead", JSON.Int (Int64.of_int readahead)) :: json_params in - - let json_params = - if sslverify then json_params - else ("file.sslverify", JSON.String "off") :: json_params in - - let json_params = - match session_cookie with - | None -> json_params - | Some cookie -> ("file.cookie", JSON.String cookie) :: json_params in - - debug "vcenter: json parameters: %s" (JSON.string_of_doc json_params); - - (* Turn the JSON parameters into a 'json:' protocol string. - * Note this requires qemu-img >= 2.1.0. - *) - let qemu_uri = "json: " ^ JSON.string_of_doc json_params in - - qemu_uri in + let password = + match password_file with + | None -> Nbdkit.NoPassword + | Some password_file -> Nbdkit.PasswordFile password_file in + + let nbdkit = + Nbdkit.create_curl ?cookie:session_cookie ~password ~sslverify + https_url in + let qemu_uri = Nbdkit.run nbdkit in (* Return the struct. *) { https_url = https_url; diff --git a/v2v/vCenter.mli b/v2v/vCenter.mli index 840e0a09e..d72d5686e 100644 --- a/v2v/vCenter.mli +++ b/v2v/vCenter.mli @@ -54,8 +54,8 @@ type remote_resource = { (** The "remote resource" is the structure returned by the {!map_source} function. *) -val map_source : ?readahead:int -> ?password_file:string -> string -> Xml.uri -> string -> string -> remote_resource -(** [map_source ?readahead ?password_file dcPath uri server path] +val map_source : ?password_file:string -> string -> Xml.uri -> string -> string -> remote_resource +(** [map_source ?password_file dcPath uri server path] maps the [<source path=...>] string to a {!remote_resource} structure containing both an [https://] URL and a qemu URI, both pointing the guest disk. -- 2.22.0

For example: $ virt-v2v -i vmx -it ssh -ip /tmp/passwd \ 'ssh://root@esxi/vmfs/volumes/datastore1/Windows/Windows.vmx' -o null --- v2v/cmdline.ml | 2 +- v2v/input_libvirt.ml | 2 +- v2v/input_libvirt_xen_ssh.ml | 8 ++++++-- v2v/input_libvirt_xen_ssh.mli | 2 +- v2v/input_vmx.ml | 30 +++++++++++++++++------------- v2v/input_vmx.mli | 4 ++-- v2v/virt-v2v-input-vmware.pod | 19 ++++++++++--------- v2v/virt-v2v-input-xen.pod | 25 ++++++++++++------------- 8 files changed, 50 insertions(+), 42 deletions(-) diff --git a/v2v/cmdline.ml b/v2v/cmdline.ml index 641eed017..c6d7af09d 100644 --- a/v2v/cmdline.ml +++ b/v2v/cmdline.ml @@ -533,7 +533,7 @@ read the man page virt-v2v(1). | Some `SSH -> Some `SSH | Some (`VDDK _) -> error (f_"only ‘-it ssh’ can be used here") in - Input_vmx.input_vmx input_transport arg in + Input_vmx.input_vmx input_password input_transport arg in (* Common error message. *) let error_option_cannot_be_used_in_output_mode mode opt = diff --git a/v2v/input_libvirt.ml b/v2v/input_libvirt.ml index a7d1706de..c41c2f60d 100644 --- a/v2v/input_libvirt.ml +++ b/v2v/input_libvirt.ml @@ -68,7 +68,7 @@ let input_libvirt input_conn input_password input_transport guest = (* Xen over SSH *) | Some server, Some "xen+ssh", _ -> Input_libvirt_xen_ssh.input_libvirt_xen_ssh - libvirt_conn parsed_uri server guest + libvirt_conn input_password parsed_uri server guest (* Old virt-v2v also supported qemu+ssh://. However I am * deliberately not supporting this in new virt-v2v. Don't diff --git a/v2v/input_libvirt_xen_ssh.ml b/v2v/input_libvirt_xen_ssh.ml index f5877b054..829406cbf 100644 --- a/v2v/input_libvirt_xen_ssh.ml +++ b/v2v/input_libvirt_xen_ssh.ml @@ -30,7 +30,7 @@ open Input_libvirt_other open Printf (* Subclass specialized for handling Xen over SSH. *) -class input_libvirt_xen_ssh libvirt_conn parsed_uri server guest = +class input_libvirt_xen_ssh libvirt_conn input_password parsed_uri server guest = object (self) inherit input_libvirt libvirt_conn guest @@ -61,7 +61,11 @@ object (self) disk | { p_source_disk = disk; p_source = P_source_dev path } | { p_source_disk = disk; p_source = P_source_file path } -> - let nbdkit = Nbdkit.create_ssh ?bandwidth ~password:NoPassword + let password = + match input_password with + | None -> Nbdkit.NoPassword + | Some ip -> Nbdkit.PasswordFile ip in + let nbdkit = Nbdkit.create_ssh ?bandwidth ~password ?port ~server ?user path in let qemu_uri = Nbdkit.run nbdkit in { disk with s_qemu_uri = qemu_uri } diff --git a/v2v/input_libvirt_xen_ssh.mli b/v2v/input_libvirt_xen_ssh.mli index 6649b9883..037d1ffbf 100644 --- a/v2v/input_libvirt_xen_ssh.mli +++ b/v2v/input_libvirt_xen_ssh.mli @@ -18,4 +18,4 @@ (** [-i libvirt] when the source is Xen *) -val input_libvirt_xen_ssh : Libvirt.rw Libvirt.Connect.t Lazy.t -> Xml.uri -> string -> string -> Types.input +val input_libvirt_xen_ssh : Libvirt.rw Libvirt.Connect.t Lazy.t -> string option -> Xml.uri -> string -> string -> Types.input diff --git a/v2v/input_vmx.ml b/v2v/input_vmx.ml index 925d80ba8..5441bccb9 100644 --- a/v2v/input_vmx.ml +++ b/v2v/input_vmx.ml @@ -106,9 +106,9 @@ let remote_file_exists uri path = eprintf "%s\n%!" cmd; Sys.command cmd = 0 -let rec find_disks ?bandwidth vmx vmx_source = - find_scsi_disks ?bandwidth vmx vmx_source - @ find_ide_disks ?bandwidth vmx vmx_source +let rec find_disks ?bandwidth input_password vmx vmx_source = + find_scsi_disks ?bandwidth input_password vmx vmx_source + @ find_ide_disks ?bandwidth input_password vmx vmx_source (* Find all SCSI hard disks. * @@ -118,7 +118,7 @@ let rec find_disks ?bandwidth vmx vmx_source = * | omitted * scsi0:0.fileName = "guest.vmdk" *) -and find_scsi_disks ?bandwidth vmx vmx_source = +and find_scsi_disks ?bandwidth input_password vmx vmx_source = let get_scsi_controller_target ns = sscanf ns "scsi%d:%d" (fun c t -> c, t) in @@ -130,7 +130,7 @@ and find_scsi_disks ?bandwidth vmx vmx_source = Some "scsi-harddisk"; None ] in let scsi_controller = Source_SCSI in - find_hdds ?bandwidth vmx vmx_source + find_hdds ?bandwidth input_password vmx vmx_source get_scsi_controller_target is_scsi_controller_target scsi_device_types scsi_controller @@ -140,7 +140,7 @@ and find_scsi_disks ?bandwidth vmx vmx_source = * ide0:0.deviceType = "ata-hardDisk" * ide0:0.fileName = "guest.vmdk" *) -and find_ide_disks ?bandwidth vmx vmx_source = +and find_ide_disks ?bandwidth input_password vmx vmx_source = let get_ide_controller_target ns = sscanf ns "ide%d:%d" (fun c t -> c, t) in @@ -151,11 +151,11 @@ and find_ide_disks ?bandwidth vmx vmx_source = let ide_device_types = [ Some "ata-harddisk" ] in let ide_controller = Source_IDE in - find_hdds ?bandwidth vmx vmx_source + find_hdds ?bandwidth input_password vmx vmx_source get_ide_controller_target is_ide_controller_target ide_device_types ide_controller -and find_hdds ?bandwidth vmx vmx_source +and find_hdds ?bandwidth input_password vmx vmx_source get_controller_target is_controller_target device_types controller = (* Find namespaces matching '(ide|scsi)X:Y' with suitable deviceType. *) @@ -181,7 +181,7 @@ and find_hdds ?bandwidth vmx vmx_source match path, v with | [ns; "filename"], Some filename -> let c, t = get_controller_target ns in - let uri, format = qemu_uri_of_filename ?bandwidth + let uri, format = qemu_uri_of_filename ?bandwidth input_password vmx_source filename in let s = { s_disk_id = (-1); s_qemu_uri = uri; s_format = Some format; @@ -209,7 +209,7 @@ and find_hdds ?bandwidth vmx vmx_source * This constructs a QEMU URI of the filename relative to the * vmx file (which might be remote over SSH). *) -and qemu_uri_of_filename ?bandwidth vmx_source filename = +and qemu_uri_of_filename ?bandwidth input_password vmx_source filename = match vmx_source with | File vmx_filename -> (* Always ensure this returns an absolute path to avoid @@ -235,8 +235,12 @@ and qemu_uri_of_filename ?bandwidth vmx_source filename = let server = server_of_uri uri in let port = Option.map string_of_int (port_of_uri uri) in let user = uri.Xml.uri_user in + let password = + match input_password with + | None -> Nbdkit.NoPassword + | Some ip -> Nbdkit.PasswordFile ip in - let nbdkit = Nbdkit.create_ssh ?bandwidth ~password:NoPassword ~server + let nbdkit = Nbdkit.create_ssh ?bandwidth ~password ~server ?port ?user abs_path in let qemu_uri = Nbdkit.run nbdkit in qemu_uri, format @@ -377,7 +381,7 @@ and find_nics vmx = let nics = List.map (fun (_, source) -> source) nics in nics -class input_vmx input_transport arg = +class input_vmx input_password input_transport arg = let tmpdir = let base_dir = (open_guestfs ())#get_cachedir () in let t = Mkdtemp.temp_dir ~base_dir "vmx." in @@ -482,7 +486,7 @@ object None | None -> None in - let disks = find_disks ?bandwidth vmx vmx_source in + let disks = find_disks ?bandwidth input_password vmx vmx_source in let removables = find_removables vmx in let nics = find_nics vmx in diff --git a/v2v/input_vmx.mli b/v2v/input_vmx.mli index 34ec2a5c6..1570a2a93 100644 --- a/v2v/input_vmx.mli +++ b/v2v/input_vmx.mli @@ -18,6 +18,6 @@ (** [-i vmx] source. *) -val input_vmx : [`SSH] option -> string -> Types.input -(** [input_vmx input_transport arg] sets up an input +val input_vmx : string option -> [`SSH] option -> string -> Types.input +(** [input_vmx input_password input_transport arg] sets up an input from vmware vmx file. *) diff --git a/v2v/virt-v2v-input-vmware.pod b/v2v/virt-v2v-input-vmware.pod index 3acdd773e..11adf1b6c 100644 --- a/v2v/virt-v2v-input-vmware.pod +++ b/v2v/virt-v2v-input-vmware.pod @@ -8,6 +8,7 @@ virt-v2v-input-vmware - Using virt-v2v to convert guests from VMware virt-v2v -i vmx -it ssh + -ip passwordfile 'ssh://root@esxi.example.com/vmfs/volumes/datastore1/guest/guest.vmx' [-o* options] @@ -132,21 +133,21 @@ If the vmx and vmdk files aren't available locally then you must I<either> mount the NFS storage on the conversion server I<or> enable passwordless SSH on the ESXi hypervisor. -=head3 VMX: Passwordless SSH using ssh-agent +=head3 VMX: SSH authentication -You must also use ssh-agent, and add your ssh public key to -F</etc/ssh/keys-root/authorized_keys> (on the ESXi hypervisor). +You can use SSH password authentication, by supplying the name of a +file containing the password to the I<-ip> option (note this option +does I<not> take the password directly). -After doing this, you should check that passwordless access works from -the virt-v2v server to the ESXi hypervisor. For example: +If you are not using password authentication, an alternative is to use +ssh-agent, and add your ssh public key to +F</etc/ssh/keys-root/authorized_keys> (on the ESXi hypervisor). After +doing this, you should check that passwordless access works from the +virt-v2v server to the ESXi hypervisor. For example: $ ssh root(a)esxi.example.com [ logs straight into the shell, no password is requested ] -Note that password-interactive and Kerberos access are B<not> -supported. You B<have> to set up ssh access using ssh-agent and -authorized_keys. - =head3 VMX: Construct the SSH URI When using the SSH input transport you must specify a remote diff --git a/v2v/virt-v2v-input-xen.pod b/v2v/virt-v2v-input-xen.pod index 4bb5d2dc2..bafeabf62 100644 --- a/v2v/virt-v2v-input-xen.pod +++ b/v2v/virt-v2v-input-xen.pod @@ -5,7 +5,9 @@ virt-v2v-input-xen - Using virt-v2v to convert guests from Xen =head1 SYNOPSIS export LIBGUESTFS_BACKEND=direct - virt-v2v -ic 'xen+ssh://root@xen.example.com' GUEST_NAME [-o* options] + virt-v2v -ic 'xen+ssh://root@xen.example.com' + -ip passwordfile + GUEST_NAME [-o* options] =head1 DESCRIPTION @@ -14,24 +16,21 @@ RHEL 5 Xen, or SLES and OpenSUSE Xen hosts. =head1 INPUT FROM XEN -=head2 Set up ssh-agent access to Xen host +=head2 SSH authentication -Currently you must enable passwordless SSH access to the remote Xen host -from the virt-v2v conversion server. +You can use SSH password authentication, by supplying the name of a +file containing the password to the I<-ip> option (note this option +does I<not> take the password directly). -You must also use ssh-agent, and add your ssh public key to -F</root/.ssh/authorized_keys> (on the Xen host). - -After doing this, you should check that passwordless access works -from the virt-v2v server to the Xen host. For example: +If you are not using password authentication, an alternative is to use +ssh-agent, and add your ssh public key to +F</root/.ssh/authorized_keys> (on the Xen host). After doing this, +you should check that passwordless access works from the virt-v2v +server to the Xen host. For example: $ ssh root(a)xen.example.com [ logs straight into the shell, no password is requested ] -Note that password-interactive and Kerberos access are B<not> -supported. You B<have> to set up ssh access using ssh-agent and -authorized_keys. - With some modern ssh implementations, legacy crypto policies required to interoperate with RHEL 5 sshd are disabled. To enable them you may need to run this command on the conversion server (ie. ssh client), -- 2.22.0