4:37 a.m.
On Tue, May 18, 2021 at 09:36:12AM +0200, Gottschalk wrote:
Hello Mr. Jones,
we use guestfish 1.4
This version was released 11 years ago??
we have an emergency of Data Recovery. We restored a ESXi 6.7
VMware-Image and
wanted to read the data inside with guestfish.
The structure of the vm is based on LVM.
The first disk with the os inside a LV can be mounted correctly.
Two disks a 400GB are covered in a Volumegroup. There is one logical Volume
with 800GB in this VG.
Guestfish does not read the filesystem in this LV.
I tried
><fs>add disk1.vmdk
><fs>add disk2.vmdk
><fs>add disk3.vmdk
><fs>run
><fs>list-devices
/dev/sda
/dev/sdb
/dev/sdc
><fs>list-partitions
/dev/sda1
On sdb and sdc there are no partitions. The LV resides directly on these disks.
I simulated this with partitioned disks and identically result.
behavior without partitions on sdb and sdc
><fs> list-filesystems
/dev/mailxxx-vg/root: ext4
/dev/mailxxx-vg/swap_1: swap
/dev/vmail-vg/vmail-lv: unknown
behavior with partitions on sdb and sdc
><fs> list-filesystems
libguestfs: error: list_filesystems: parted exited with status 1: Error: Can't
have a partition outside the disk!
><fs>
><fs>mount /dev/mailxxx-vg/root /
works fine
><fs>mount/dev/vmail-vg/vmail-lv /
libguestfs: error: mount: mount_stub: /dev/vmail-vg/vmail-lv: expecting a
device name
How can i get access to this LV?
Can you help me please?
Thank you very much.
I would suggest enabling debugging to start with, which should give
you more information about what is actually going on. This section of
the FAQ will explain how to do that:
https://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html
8:02 a.m.
New subject: guestfish emergency extension
Hello Mr. Jones,
thank you for the quick response.
Mit freundlichen Grüßen
ppa. Olaf Gottschalk
raw Rechen-Anlage West GmbH
Postfach 1120 | 52368 Kreuzau
Empfang: +49 2421 9555-0 <tel:+49 2421 9555-0> | raw(a)raw.de
<mailto:raw@raw.de> Sitz der Gesellschaft: Am Burgholz 33-35 | 52372
Kreuzau-Stockheim
Hotline: +49 2421 9555-55 <tel:+49 2421 9555-55> | hotline(a)raw.de
<mailto:hotline@raw.de> Geschäftsführer: Dipl.-Ing. Alexander Kutsch
Internet: www.raw.de <https://www.raw.de> Handelsregister:
Amtsgericht Düren HRB 134
UST- ID: DE 122 278 535
Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten
Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser
E-Mail oder dessen Vertreter sein sollten, so beachten Sie bitte, dass
jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder
Weitergabe des Inhalts dieser E-Mail unzulässig sind. Wir bitten Sie,
sich in diesem Fall mit dem Absender der E-Mail in Verbindung zu setzen.
Aussagen gegenüber dem Adressaten unterliegen den Regelungen des
zugrundeliegenden Angebotes bzw. Auftrages, insbesondere den allgemeinen
Auftragsbedingungen und der individuellen Haftungsvereinbarung. Der
Inhalt dieser E-Mail ist nur rechtsverbindlich, wenn er unsererseits
durch einen Brief entsprechend bestätigt wird. Die Versendung von
E-Mails an uns hat keine fristwahrende Wirkung. Wir möchten Sie außerdem
darauf hinweisen, dass die Kommunikation per E-Mail über das Internet
unsicher ist, da für unberechtigte Dritte grundsätzlich die Möglichkeit
der Kenntnisnahme und Manipulation besteht.
Am 18.05.21 um 11:37 schrieb Richard W.M. Jones:
On Tue, May 18, 2021 at 09:36:12AM +0200, Gottschalk wrote:
> Hello Mr. Jones,
>
> we use guestfish 1.4
This version was released 11 years ago??
> we have an emergency of Data Recovery. We restored a ESXi 6.7 VMware-Image and
> wanted to read the data inside with guestfish.
>
> The structure of the vm is based on LVM.
>
> The first disk with the os inside a LV can be mounted correctly.
>
> Two disks a 400GB are covered in a Volumegroup. There is one logical Volume
> with 800GB in this VG.
>
> Guestfish does not read the filesystem in this LV.
>
> I tried
>
>> <fs>add disk1.vmdk
>> <fs>add disk2.vmdk
>> <fs>add disk3.vmdk
>> <fs>run
>> <fs>list-devices
> /dev/sda
> /dev/sdb
> /dev/sdc
>
>> <fs>list-partitions
> /dev/sda1
> On sdb and sdc there are no partitions. The LV resides directly on these disks.
> I simulated this with partitioned disks and identically result.
>
> behavior without partitions on sdb and sdc
>> <fs> list-filesystems
> /dev/mailxxx-vg/root: ext4
> /dev/mailxxx-vg/swap_1: swap
> /dev/vmail-vg/vmail-lv: unknown
>
> behavior with partitions on sdb and sdc
>> <fs> list-filesystems
> libguestfs: error: list_filesystems: parted exited with status 1: Error: Can't
> have a partition outside the disk!
>> <fs>
>
>> <fs>mount /dev/mailxxx-vg/root /
> works fine
>> <fs>mount/dev/vmail-vg/vmail-lv /
> libguestfs: error: mount: mount_stub: /dev/vmail-vg/vmail-lv: expecting a
> device name
>
> How can i get access to this LV?
> Can you help me please?
> Thank you very much.
I would suggest enabling debugging to start with, which should give
you more information about what is actually going on. This section of
the FAQ will explain how to do that:
https://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs
Rich.
3:01 a.m.
New subject: guestfish emergency extension
Hello Rich,
thank you for your information.
There are 3 Files attached to this E-Mail.
1. Output of libguestfs-test-tool with Result = OK
2. guestfish session with the first Server mail019001. There are
problems with vmail-vg and vmail-lv.
This Server is actual productive.
3. guestfish session with the second server mail019000-backup. There are
problems with mail-vg and mail-lv.
This server is newly installed with comparable VGs and LVs except of
Partitions on /dev/sdb and /dev/sdc.
The Backupserver, where the images were restored from Bareos, is a
Ubuntu 20.04 LTS with actual Updates and Upgrades.
root@b019001:/restore/mail019001/mail019001-restore-05# cat /etc/issue
Ubuntu 20.04.2 LTS \n \l
root@b019001:/restore/mail019001/mail019001-restore-05# uname -a
Linux b019001 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 17:39:42 UTC
2021 x86_64 x86_64 x86_64 GNU/Linux
root@b019001:/restore/mail019001/mail019001-restore-05#
libguestfs was installed with "apt install libguestfs-tools".
Mit freundlichen Grüßen
ppa. Olaf Gottschalk
raw Rechen-Anlage West GmbH
Postfach 1120 | 52368 Kreuzau
Empfang: +49 2421 9555-0 <tel:+49 2421 9555-0> | raw(a)raw.de
<mailto:raw@raw.de> Sitz der Gesellschaft: Am Burgholz 33-35 | 52372
Kreuzau-Stockheim
Hotline: +49 2421 9555-55 <tel:+49 2421 9555-55> | hotline(a)raw.de
<mailto:hotline@raw.de> Geschäftsführer: Dipl.-Ing. Alexander Kutsch
Internet: www.raw.de <https://www.raw.de> Handelsregister:
Amtsgericht Düren HRB 134
UST- ID: DE 122 278 535
Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten
Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser
E-Mail oder dessen Vertreter sein sollten, so beachten Sie bitte, dass
jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder
Weitergabe des Inhalts dieser E-Mail unzulässig sind. Wir bitten Sie,
sich in diesem Fall mit dem Absender der E-Mail in Verbindung zu setzen.
Aussagen gegenüber dem Adressaten unterliegen den Regelungen des
zugrundeliegenden Angebotes bzw. Auftrages, insbesondere den allgemeinen
Auftragsbedingungen und der individuellen Haftungsvereinbarung. Der
Inhalt dieser E-Mail ist nur rechtsverbindlich, wenn er unsererseits
durch einen Brief entsprechend bestätigt wird. Die Versendung von
E-Mails an uns hat keine fristwahrende Wirkung. Wir möchten Sie außerdem
darauf hinweisen, dass die Kommunikation per E-Mail über das Internet
unsicher ist, da für unberechtigte Dritte grundsätzlich die Möglichkeit
der Kenntnisnahme und Manipulation besteht.
Am 18.05.21 um 11:37 schrieb Richard W.M. Jones:
On Tue, May 18, 2021 at 09:36:12AM +0200, Gottschalk wrote:
> Hello Mr. Jones,
>
> we use guestfish 1.4
This version was released 11 years ago??
> we have an emergency of Data Recovery. We restored a ESXi 6.7 VMware-Image and
> wanted to read the data inside with guestfish.
>
> The structure of the vm is based on LVM.
>
> The first disk with the os inside a LV can be mounted correctly.
>
> Two disks a 400GB are covered in a Volumegroup. There is one logical Volume
> with 800GB in this VG.
>
> Guestfish does not read the filesystem in this LV.
>
> I tried
>
>> <fs>add disk1.vmdk
>> <fs>add disk2.vmdk
>> <fs>add disk3.vmdk
>> <fs>run
>> <fs>list-devices
> /dev/sda
> /dev/sdb
> /dev/sdc
>
>> <fs>list-partitions
> /dev/sda1
> On sdb and sdc there are no partitions. The LV resides directly on these disks.
> I simulated this with partitioned disks and identically result.
>
> behavior without partitions on sdb and sdc
>> <fs> list-filesystems
> /dev/mailxxx-vg/root: ext4
> /dev/mailxxx-vg/swap_1: swap
> /dev/vmail-vg/vmail-lv: unknown
>
> behavior with partitions on sdb and sdc
>> <fs> list-filesystems
> libguestfs: error: list_filesystems: parted exited with status 1: Error: Can't
> have a partition outside the disk!
>> <fs>
>
>> <fs>mount /dev/mailxxx-vg/root /
> works fine
>> <fs>mount/dev/vmail-vg/vmail-lv /
> libguestfs: error: mount: mount_stub: /dev/vmail-vg/vmail-lv: expecting a
> device name
>
> How can i get access to this LV?
> Can you help me please?
> Thank you very much.
I would suggest enabling debugging to start with, which should give
you more information about what is actually going on. This section of
the FAQ will explain how to do that:
https://libguestfs.org/guestfs-faq.1.html#debugging-libguestfs
Rich.
7:58 a.m.
New subject: guestfish emergency extension
On Wed, May 19, 2021 at 10:01:33AM +0200, Gottschalk wrote:
+ lvm pvs
WARNING: Device /dev/sdb has size of 398267904 sectors which is smaller than
corresponding PV size of 838860800 sectors. Was device resized?
WARNING: One or more devices used as PVs in VG vmail-vg have changed sizes.
PV VG Fmt Attr PSize PFree
/dev/sda1 mailxxx-vg lvm2 a-- <20.00g 0
/dev/sdb vmail-vg lvm2 a-- <400.00g 0
/dev/sdc vmail-vg lvm2 a-- <400.00g 192.00m
+ lvm vgs
WARNING: Device /dev/sdb has size of 398267904 sectors which is smaller than
corresponding PV size of 838860800 sectors. Was device resized?
WARNING: One or more devices used as PVs in VG vmail-vg have changed sizes.
VG #PV #LV #SN Attr VSize VFree
mailxxx-vg 1 2 0 wz--n- <20.00g 0
vmail-vg 2 1 0 wz--n- 799.99g 192.00m
+ lvm lvs
WARNING: Device /dev/sdb has size of 398267904 sectors which is smaller than
corresponding PV size of 838860800 sectors. Was device resized?
WARNING: One or more devices used as PVs in VG vmail-vg have changed sizes.
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync
Convert
root mailxxx-vg -wi-a----- <19.04g
swap_1 mailxxx-vg -wi-a----- 980.00m
vmail-lv vmail-vg -wi------- 799.80g
There's the error - the LVM PV is corrupt and/or the underlying disk
was shrunk without shrinking the PV.
Restoration from backups is the way to go here, but you could also try
examining the disk using the "virt-rescue" tool, which may allow you
to recover something.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html
8:12 a.m.
New subject: guestfish emergency extension
Hello Rich,
thank you very much for your help.
Mit freundlichen Grüßen
ppa. Olaf Gottschalk
raw Rechen-Anlage West GmbH
Postfach 1120 | 52368 Kreuzau
Empfang: +49 2421 9555-0 <tel:+49 2421 9555-0> | raw(a)raw.de
<mailto:raw@raw.de> Sitz der Gesellschaft: Am Burgholz 33-35 | 52372
Kreuzau-Stockheim
Hotline: +49 2421 9555-55 <tel:+49 2421 9555-55> | hotline(a)raw.de
<mailto:hotline@raw.de> Geschäftsführer: Dipl.-Ing. Alexander Kutsch
Internet: www.raw.de <https://www.raw.de> Handelsregister:
Amtsgericht Düren HRB 134
UST- ID: DE 122 278 535
Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten
Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser
E-Mail oder dessen Vertreter sein sollten, so beachten Sie bitte, dass
jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder
Weitergabe des Inhalts dieser E-Mail unzulässig sind. Wir bitten Sie,
sich in diesem Fall mit dem Absender der E-Mail in Verbindung zu setzen.
Aussagen gegenüber dem Adressaten unterliegen den Regelungen des
zugrundeliegenden Angebotes bzw. Auftrages, insbesondere den allgemeinen
Auftragsbedingungen und der individuellen Haftungsvereinbarung. Der
Inhalt dieser E-Mail ist nur rechtsverbindlich, wenn er unsererseits
durch einen Brief entsprechend bestätigt wird. Die Versendung von
E-Mails an uns hat keine fristwahrende Wirkung. Wir möchten Sie außerdem
darauf hinweisen, dass die Kommunikation per E-Mail über das Internet
unsicher ist, da für unberechtigte Dritte grundsätzlich die Möglichkeit
der Kenntnisnahme und Manipulation besteht.
Am 19.05.21 um 14:58 schrieb Richard W.M. Jones:
On Wed, May 19, 2021 at 10:01:33AM +0200, Gottschalk wrote:
> + lvm pvs
> WARNING: Device /dev/sdb has size of 398267904 sectors which is smaller than
corresponding PV size of 838860800 sectors. Was device resized?
> WARNING: One or more devices used as PVs in VG vmail-vg have changed sizes.
> PV VG Fmt Attr PSize PFree
> /dev/sda1 mailxxx-vg lvm2 a-- <20.00g 0
> /dev/sdb vmail-vg lvm2 a-- <400.00g 0
> /dev/sdc vmail-vg lvm2 a-- <400.00g 192.00m
> + lvm vgs
> WARNING: Device /dev/sdb has size of 398267904 sectors which is smaller than
corresponding PV size of 838860800 sectors. Was device resized?
> WARNING: One or more devices used as PVs in VG vmail-vg have changed sizes.
> VG #PV #LV #SN Attr VSize VFree
> mailxxx-vg 1 2 0 wz--n- <20.00g 0
> vmail-vg 2 1 0 wz--n- 799.99g 192.00m
> + lvm lvs
> WARNING: Device /dev/sdb has size of 398267904 sectors which is smaller than
corresponding PV size of 838860800 sectors. Was device resized?
> WARNING: One or more devices used as PVs in VG vmail-vg have changed sizes.
> LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync
Convert
> root mailxxx-vg -wi-a----- <19.04g
> swap_1 mailxxx-vg -wi-a----- 980.00m
> vmail-lv vmail-vg -wi------- 799.80g
There's the error - the LVM PV is corrupt and/or the underlying disk
was shrunk without shrinking the PV.
Restoration from backups is the way to go here, but you could also try
examining the disk using the "virt-rescue" tool, which may allow you
to recover something.
Rich.
1253
days inactive
1254
days old
4 comments
2 participants
participants (2)
-
Gottschalk -
Richard W.M. Jones