2:07 p.m.
From: Eric Blake <eblake(a)redhat.com>
To: Laszlo Ersek <lersek(a)redhat.com>, docs(a)python.org
Cc: Nir Soffer <nsoffer(a)redhat.com>, aryeyur(a)google.com,
libguestfs(a)redhat.com, shtarkman(a)google.com
Bcc:
Subject: Re: [Libguestfs] [PATCH 1/2] python: Avoid crash if callback
parameters cannot be built
Reply-To:
In-Reply-To: <c8259881-9fac-5987-8ac1-3286ff35adc1(a)redhat.com>
[adding docs(a)python.org, in the hopes that this conversation can spur
an improvement in Python's documentation]
I'm trimming to just context on the doc issue at hand (this question
spawned deep within a thread [1] to libguestfs reference counting bug
in its Python bindings)
[1] https://listman.redhat.com/archives/libguestfs/2023-February/030663.html
On Tue, Feb 21, 2023 at 03:06:47PM +0100, Laszlo Ersek wrote:
On 2/20/23 21:52, Eric Blake wrote:
> On Mon, Feb 20, 2023 at 09:08:08PM +0200, Nir Soffer wrote:
>> On Mon, Feb 20, 2023 at 10:45 AM Laszlo Ersek <lersek(a)redhat.com> wrote:
>>>
>>> On 2/17/23 17:52, Eric Blake wrote:
>>>> On Thu, Feb 16, 2023 at 03:09:02PM +0100, Laszlo Ersek wrote:
>>>
>>>>> - Py_BuildValue with the "O" format specifier transfers
the new list's
>>>>> *sole* reference (= ownership) to the just-built higher-level object
"args"
>>>>
>>>> Reference transfer is done with "N", not "O". That
would be an
>>>> alternative to decreasing the refcount of py_array on success, but not
>>>> eliminate the need to decrease the refcount on Py_BuildValue failure.
>>>>
>>>>>
>>>>> - when "args" is killed (decref'd), it takes care of
"py_array".
>>>>>
>>>>> Consequently, if Py_BuildValue fails, "py_array" continues
owning the
>>>>> new list -- and I believe that, if we take the new error branch, we
leak
>>>>> the object pointed-to by "py_array". Is that the case?
>>>>
>>>> Not quite. "O" is different than "N".
>>>
>>> I agree with you *now*, looking up the "O" specification at
>>> <https://docs.python.org/3/c-api/arg.html#building-values>;.
>>>
>>> However, when I was writing my email, I looked up Py_BuildValue at that
>>> time as well, just elsewhere. I don't know where. Really. And then that
>>> documentation said that the reference count would *not* be increased. I
>>> distinctly remember that, because it surprised me -- I actually recalled
>>> an *even earlier* experience reading the documentation, which had again
>>> stated that "O" would increase the reference count.
>>
>> Maybe here:
>> https://docs.python.org/2/c-api/arg.html#building-values
>>
>> Looks like another incompatibility between python 2 and 3.
>
> Or maybe misreading the wrong part of the page. PyArg_ParseTuple()
> and Py_BuildValue() are listed on the same page, and intentionally use
> similar-looking format strings, so you have to check _which_ part of
> the page the "O" you are reading about is associated with. The first
> "O" is under PyArg_ParseTuple() and friends, and intentionally does
> not increase reference count (the usesr passed us an Object, we are
> parsing it into a placeholder where we don't need to clean up after
> ourselves unless we want to add a reference to the object to make it
> last beyond the caller), the latter says that "O" does increase the
> reference count (we are building up a larger object that will now be
> an additional reference path into the object we are passing in).
>
Yea, I'll just go ahead and call myself an idiot. :)
(Please, please, make documentation fool-proof! I'm not an unrelenting,
unrepentant, principled fool, but still a fool.)
In short, the issue is that the Python documentation (even in the
latest version at https://docs.python.org/3/c-api/arg.html) has TWO
separate paradigms on the SAME page, and so many format characters
that you can easily get lost in a wall of
X (foo) [bar]
designators that you can easily lose track of whether you are reading
the docs for PyArg_ParseTuple() and friends with paradigm "X (Python
source) [C destination]", or the docs for Py_BuildValue() with
paradigm "X (Python destination) [C source]".
When it comes to reference counting, there is a HUGE and IMPORTANT
difference between the former:
O (object) [PyObject *]
Store a Python object (without any conversion) in a C object
pointer. The C program thus receives the actual object that was
passed. The object’s reference count is not increased. The pointer
stored is not NULL.
and the latter:
O (object) [PyObject *]
Pass a Python object untouched (except for its reference count,
which is incremented by one). If the object passed in is a NULL
pointer, it is assumed that this was caused because the call
producing the argument found an error and set an
exception. Therefore, Py_BuildValue() will return NULL but won’t
raise an exception. If no exception has been raised yet,
SystemError is set.
But as neither instance of "O (object) [PyObject *]" is on the screen
at the same time as the functions to which that format specifier is
documenting, it is EASY for a novice coder to read the wrong one, and
then get the wrong ideas about reference counting when using the "O"
format specifier.
My suggestion: a simple swap of the order of the Py_BuildValue()
notations to:
PyArg_ParseValue()...
X (Python source) [C destination]
Py_BuildValue()...
X [C source] (Python destination]
so that it is always source before destination, and always [] for the
C counterpart and () for the Python counterpart. Another idea might
be splitting the page into two, so that the two walls of format
specifier text cannot be mistaken for one another when rapidly
scrolling through the page looking for a given format letter; but I
personally like both on the same page as the two sets of format
specifiers are (intentionally) related, even if subtly different
depending on direction.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3266
Virtualization: qemu.org | libvirt.org