[Libguestfs] [PATCH 2/4] p2v: Use 'scp' to copy the files to remote debugging directory.

Previously we copied / creates files in the remote dir by running complex shell commands like: cat > file <<'EOF' ## the file was copied in here EOF This was a little hairy, but in particular it doesn't allow us to set the ssh session to cooked mode (so we can send ^C to cancel a conversion). A cleaner way to do it is to use 'scp' to copy the files over. --- p2v/Makefile.am | 1 + p2v/conversion.c | 279 ++++++++++++++++++++++++----------------------- p2v/p2v.h | 3 +- p2v/ssh.c | 255 ++++++++++++++++++++++++++++++------------- p2v/test-virt-p2v-scp.sh | 58 ++++++++++ p2v/test-virt-p2v.sh | 5 +- p2v/virt-p2v.pod | 4 + 7 files changed, 388 insertions(+), 217 deletions(-) create mode 100755 p2v/test-virt-p2v-scp.sh diff --git a/p2v/Makefile.am b/p2v/Makefile.am index 525b80c..0067d5a 100644 --- a/p2v/Makefile.am +++ b/p2v/Makefile.am @@ -27,6 +27,7 @@ EXTRA_DIST = \ p2v.ks.in \ p2v.service \ test-virt-p2v-pxe.sshd_config.in \ + test-virt-p2v-scp.sh \ test-virt-p2v-ssh.sh \ virt-p2v.pod \ virt-p2v-make-disk.in \ diff --git a/p2v/conversion.c b/p2v/conversion.c index 12fd93f..721882f 100644 --- a/p2v/conversion.c +++ b/p2v/conversion.c @@ -44,6 +44,7 @@ #include <locale.h> #include <libintl.h> #include <netdb.h> +#include <sys/stat.h> #include <sys/types.h> #include <sys/wait.h> @@ -95,9 +96,12 @@ struct data_conn { static pid_t start_qemu_nbd (int nbd_local_port, const char *device); static int wait_qemu_nbd (int nbd_local_port, int timeout_seconds); static void cleanup_data_conns (struct data_conn *data_conns, size_t nr); -static char *generate_libvirt_xml (struct config *, struct data_conn *); -static char *generate_wrapper_script (struct config *, const char *remote_dir); +static void generate_name (struct config *, const char *filename); +static void generate_libvirt_xml (struct config *, struct data_conn *, const char *filename); +static void generate_wrapper_script (struct config *, const char *remote_dir, const char *filename); +static void generate_dmesg_file (const char *filename); static const char *map_interface_to_network (struct config *, const char *interface); +static void print_quoted (FILE *fp, const char *s); static char *conversion_error; @@ -179,15 +183,16 @@ start_conversion (struct config *config, int status; size_t i, len; size_t nr_disks = guestfs_int_count_strings (config->disks); - CLEANUP_FREE struct data_conn *data_conns = NULL; - CLEANUP_FREE char *remote_dir = NULL, *libvirt_xml = NULL, - *wrapper_script = NULL; time_t now; struct tm tm; mexp_h *control_h = NULL; - char dmesg_cmd[] = "dmesg > /tmp/dmesg.XXXXXX", *dmesg_file = &dmesg_cmd[8]; - CLEANUP_FREE char *dmesg = NULL; - int fd, r; + CLEANUP_FREE struct data_conn *data_conns = NULL; + CLEANUP_FREE char *remote_dir = NULL; + char tmpdir[] = "/tmp/p2v.XXXXXX"; + char name_file[] = "/tmp/p2v.XXXXXX/name"; + char libvirt_xml_file[] = "/tmp/p2v.XXXXXX/physical.xml"; + char wrapper_script[] = "/tmp/p2v.XXXXXX/virt-v2v-wrapper.sh"; + char dmesg_file[] = "/tmp/p2v.XXXXXX/dmesg"; #if DEBUG_STDERR print_config (config, stderr); @@ -285,59 +290,53 @@ start_conversion (struct config *config, if (notify_ui) notify_ui (NOTIFY_LOG_DIR, remote_dir); - /* Generate the libvirt XML. */ - libvirt_xml = generate_libvirt_xml (config, data_conns); - if (libvirt_xml == NULL) - goto out; - -#if DEBUG_STDERR && 0 - fprintf (stderr, "%s: libvirt XML:\n%s", - guestfs_int_program_name, libvirt_xml); -#endif - - /* Generate the virt-v2v wrapper script. */ - wrapper_script = generate_wrapper_script (config, remote_dir); - if (wrapper_script == NULL) - goto out; - -#if DEBUG_STDERR && 0 - fprintf (stderr, "%s: wrapper script:\n%s", - guestfs_int_program_name, wrapper_script); -#endif - - /* Get the output from the 'dmesg' command. We will store this - * on the remote server. - */ - fd = mkstemp (dmesg_file); - if (fd == -1) { - perror ("mkstemp"); - goto skip_dmesg; - } - close (fd); - r = system (dmesg_cmd); - if (r == -1) { - perror ("system"); - goto skip_dmesg; - } - if (!WIFEXITED (r) || WEXITSTATUS (r) != 0) { - fprintf (stderr, "'dmesg' failed (ignored)\n"); - goto skip_dmesg; + /* Generate the local temporary directory. */ + if (mkdtemp (tmpdir) == NULL) { + perror ("mkdtemp"); + cleanup_data_conns (data_conns, nr_disks); + exit (EXIT_FAILURE); } + memcpy (name_file, tmpdir, strlen (tmpdir)); + memcpy (libvirt_xml_file, tmpdir, strlen (tmpdir)); + memcpy (wrapper_script, tmpdir, strlen (tmpdir)); + memcpy (dmesg_file, tmpdir, strlen (tmpdir)); - ignore_value (read_whole_file (dmesg_file, &dmesg, NULL)); - skip_dmesg: + /* Generate the static files. */ + generate_name (config, name_file); + generate_libvirt_xml (config, data_conns, libvirt_xml_file); + generate_wrapper_script (config, remote_dir, wrapper_script); + generate_dmesg_file (dmesg_file); - /* Open the control connection and start conversion */ + /* Open the control connection. This also creates remote_dir. */ if (notify_ui) notify_ui (NOTIFY_STATUS, _("Setting up the control connection ...")); - control_h = start_remote_connection (config, - remote_dir, libvirt_xml, - wrapper_script, dmesg); + control_h = start_remote_connection (config, remote_dir); if (control_h == NULL) { - const char *err = get_ssh_error (); + set_conversion_error ("could not open control connection over SSH to the conversion server: %s", + get_ssh_error ()); + goto out; + } - set_conversion_error ("could not open control connection over SSH to the conversion server: %s", err); + /* Copy the static files to the remote dir. */ + if (scp_file (config, name_file, remote_dir) == -1) { + set_conversion_error ("scp: %s to %s: %s", + name_file, remote_dir, get_ssh_error ()); + goto out; + } + if (scp_file (config, libvirt_xml_file, remote_dir) == -1) { + set_conversion_error ("scp: %s to %s: %s", + libvirt_xml_file, remote_dir, get_ssh_error ()); + goto out; + } + if (scp_file (config, wrapper_script, remote_dir) == -1) { + set_conversion_error ("scp: %s to %s: %s", + wrapper_script, remote_dir, get_ssh_error ()); + goto out; + } + if (scp_file (config, dmesg_file, remote_dir) == -1) { + set_conversion_error ("scp: %s to %s: %s", + dmesg_file, remote_dir, get_ssh_error ()); goto out; } @@ -689,20 +688,16 @@ cleanup_data_conns (struct data_conn *data_conns, size_t nr) /* Macros "inspired" by src/launch-libvirt.c */ /* <element */ #define start_element(element) \ - if (xmlTextWriterStartElement (xo, BAD_CAST (element)) == -1) { \ - set_conversion_error ("xmlTextWriterStartElement: %m"); \ - return NULL; \ - } \ + if (xmlTextWriterStartElement (xo, BAD_CAST (element)) == -1) \ + error (EXIT_FAILURE, errno, "xmlTextWriterStartElement"); \ do /* finish current </element> */ #define end_element() \ while (0); \ do { \ - if (xmlTextWriterEndElement (xo) == -1) { \ - set_conversion_error ("xmlTextWriterEndElement: %m"); \ - return NULL; \ - } \ + if (xmlTextWriterEndElement (xo) == -1) \ + error (EXIT_FAILURE, errno, "xmlTextWriterEndElement"); \ } while (0) /* <element/> */ @@ -711,39 +706,39 @@ cleanup_data_conns (struct data_conn *data_conns, size_t nr) /* key=value attribute of the current element. */ #define attribute(key,value) \ - if (xmlTextWriterWriteAttribute (xo, BAD_CAST (key), BAD_CAST (value)) == -1) { \ - set_conversion_error ("xmlTextWriterWriteAttribute: %m"); \ - return NULL; \ - } + do { \ + if (xmlTextWriterWriteAttribute (xo, BAD_CAST (key), BAD_CAST (value)) == -1) \ + error (EXIT_FAILURE, errno, "xmlTextWriterWriteAttribute"); \ + } while (0) /* key=value, but value is a printf-style format string. */ #define attribute_format(key,fs,...) \ - if (xmlTextWriterWriteFormatAttribute (xo, BAD_CAST (key), \ - fs, ##__VA_ARGS__) == -1) { \ - set_conversion_error ("xmlTextWriterWriteFormatAttribute: %m"); \ - return NULL; \ - } + do { \ + if (xmlTextWriterWriteFormatAttribute (xo, BAD_CAST (key), \ + fs, ##__VA_ARGS__) == -1) \ + error (EXIT_FAILURE, errno, "xmlTextWriterWriteFormatAttribute"); \ + } while (0) /* A string, eg. within an element. */ -#define string(str) \ - if (xmlTextWriterWriteString (xo, BAD_CAST (str)) == -1) { \ - set_conversion_error ("xmlTextWriterWriteString: %m"); \ - return NULL; \ - } +#define string(str) \ + do { \ + if (xmlTextWriterWriteString (xo, BAD_CAST (str)) == -1) \ + error (EXIT_FAILURE, errno, "xmlTextWriterWriteString"); \ + } while (0) /* A string, using printf-style formatting. */ #define string_format(fs,...) \ - if (xmlTextWriterWriteFormatString (xo, fs, ##__VA_ARGS__) == -1) { \ - set_conversion_error ("xmlTextWriterWriteFormatString: %m"); \ - return NULL; \ - } + do { \ + if (xmlTextWriterWriteFormatString (xo, fs, ##__VA_ARGS__) == -1) \ + error (EXIT_FAILURE, errno, "xmlTextWriterWriteFormatString"); \ + } while (0) /* An XML comment. */ #define comment(str) \ - if (xmlTextWriterWriteComment (xo, BAD_CAST (str)) == -1) { \ - set_conversion_error ("xmlTextWriterWriteComment: %m"); \ - return NULL; \ - } + do { \ + if (xmlTextWriterWriteComment (xo, BAD_CAST (str)) == -1) \ + error (EXIT_FAILURE, errno, "xmlTextWriterWriteComment"); \ + } while (0) /** * Write the libvirt XML for this physical machine. @@ -752,41 +747,23 @@ cleanup_data_conns (struct data_conn *data_conns, size_t nr) * virt-v2v on the conversion server. Virt-v2v will (if necessary) * generate the final libvirt XML. */ -static char * -generate_libvirt_xml (struct config *config, struct data_conn *data_conns) +static void +generate_libvirt_xml (struct config *config, struct data_conn *data_conns, + const char *filename) { uint64_t memkb; - char *ret; - CLEANUP_XMLBUFFERFREE xmlBufferPtr xb = NULL; - xmlOutputBufferPtr ob; CLEANUP_XMLFREETEXTWRITER xmlTextWriterPtr xo = NULL; size_t i; - xb = xmlBufferCreate (); - if (xb == NULL) { - set_conversion_error ("xmlBufferCreate: %m"); - return NULL; - } - ob = xmlOutputBufferCreateBuffer (xb, NULL); - if (ob == NULL) { - set_conversion_error ("xmlOutputBufferCreateBuffer: %m"); - return NULL; - } - xo = xmlNewTextWriter (ob); - if (xo == NULL) { - set_conversion_error ("xmlNewTextWriter: %m"); - return NULL; - } + xo = xmlNewTextWriterFilename (filename, 0); + if (xo == NULL) + error (EXIT_FAILURE, errno, "xmlNewTextWriterFilename"); if (xmlTextWriterSetIndent (xo, 1) == -1 || - xmlTextWriterSetIndentString (xo, BAD_CAST " ") == -1) { - set_conversion_error ("could not set XML indent: %m"); - return NULL; - } - if (xmlTextWriterStartDocument (xo, NULL, NULL, NULL) == -1) { - set_conversion_error ("xmlTextWriterStartDocument: %m"); - return NULL; - } + xmlTextWriterSetIndentString (xo, BAD_CAST " ") == -1) + error (EXIT_FAILURE, errno, "could not set XML indent"); + if (xmlTextWriterStartDocument (xo, NULL, NULL, NULL) == -1) + error (EXIT_FAILURE, errno, "xmlTextWriterStartDocument"); memkb = config->memory / 1024; @@ -929,17 +906,8 @@ generate_libvirt_xml (struct config *config, struct data_conn *data_conns) } end_element (); /* </domain> */ - if (xmlTextWriterEndDocument (xo) == -1) { - set_conversion_error ("xmlTextWriterEndDocument: %m"); - return NULL; - } - ret = (char *) xmlBufferDetach (xb); /* caller frees */ - if (ret == NULL) { - set_conversion_error ("xmlBufferDetach: %m"); - return NULL; - } - - return ret; + if (xmlTextWriterEndDocument (xo) == -1) + error (EXIT_FAILURE, errno, "xmlTextWriterEndDocument"); } /** @@ -976,19 +944,18 @@ map_interface_to_network (struct config *config, const char *interface) } /** - * Print a shell-quoted string on C<fp>. + * Write the guest name into C<filename>. */ static void -print_quoted (FILE *fp, const char *s) +generate_name (struct config *config, const char *filename) { - fprintf (fp, "\""); - while (*s) { - if (*s == '$' || *s == '`' || *s == '\\' || *s == '"') - fprintf (fp, "\\"); - fprintf (fp, "%c", *s); - ++s; - } - fprintf (fp, "\""); + FILE *fp; + + fp = fopen (filename, "w"); + if (fp == NULL) + error (EXIT_FAILURE, errno, "fopen: %s", filename); + fprintf (fp, "%s\n", config->guestname); + fclose (fp); } /** @@ -998,16 +965,15 @@ print_quoted (FILE *fp, const char *s) * to "type" a long and complex single command line into the ssh * connection when we start the conversion. */ -static char * -generate_wrapper_script (struct config *config, const char *remote_dir) +static void +generate_wrapper_script (struct config *config, const char *remote_dir, + const char *filename) { FILE *fp; - char *output = NULL; - size_t output_len = 0; - fp = open_memstream (&output, &output_len); + fp = fopen (filename, "w"); if (fp == NULL) - error (EXIT_FAILURE, errno, "open_memstream"); + error (EXIT_FAILURE, errno, "fopen: %s", filename); fprintf (fp, "#!/bin/bash -\n"); fprintf (fp, "\n"); @@ -1106,7 +1072,42 @@ generate_wrapper_script (struct config *config, const char *remote_dir) "fi\n", remote_dir); + fprintf (fp, "\n"); + fprintf (fp, "# EOF\n"); fclose (fp); - return output; /* caller frees */ + if (chmod (filename, 0755) == -1) + error (EXIT_FAILURE, errno, "chmod: %s", filename); +} + +/** + * Print a shell-quoted string on C<fp>. + */ +static void +print_quoted (FILE *fp, const char *s) +{ + fprintf (fp, "\""); + while (*s) { + if (*s == '$' || *s == '`' || *s == '\\' || *s == '"') + fprintf (fp, "\\"); + fprintf (fp, "%c", *s); + ++s; + } + fprintf (fp, "\""); +} + +/** + * Put the output of the C<dmesg> command into C<filename>. + * + * If the command fails, this is non-fatal. + */ +static void +generate_dmesg_file (const char *filename) +{ + CLEANUP_FREE char *cmd = NULL; + + if (asprintf (&cmd, "dmesg >%s 2>&1", filename) == -1) + error (EXIT_FAILURE, errno, "asprintf"); + + ignore_value (system (cmd)); } diff --git a/p2v/p2v.h b/p2v/p2v.h index 52d5ccb..da30340 100644 --- a/p2v/p2v.h +++ b/p2v/p2v.h @@ -130,8 +130,9 @@ extern int conversion_is_running (void); /* ssh.c */ extern int test_connection (struct config *); extern mexp_h *open_data_connection (struct config *, int *local_port, int *remote_port); -extern mexp_h *start_remote_connection (struct config *, const char *remote_dir, const char *libvirt_xml, const char *wrapper_script, const char *dmesg); +extern mexp_h *start_remote_connection (struct config *, const char *remote_dir); extern const char *get_ssh_error (void); +extern int scp_file (struct config *config, const char *localfile, const char *remotefile); /* utils.c */ extern uint64_t get_blockdev_size (const char *dev); diff --git a/p2v/ssh.c b/p2v/ssh.c index 07fa25e..0d0874a 100644 --- a/p2v/ssh.c +++ b/p2v/ssh.c @@ -553,6 +553,182 @@ start_ssh (struct config *config, char **extra_args, int wait_prompt) return h; } +/** + * Upload a file to remote using L<scp(1)>. + * + * This is a simplified version of L</start_ssh> above. + */ +int +scp_file (struct config *config, const char *localfile, const char *remotefile) +{ + size_t j, nr_args; + char port_str[64]; + char connect_timeout_str[128]; + CLEANUP_FREE char *remote = NULL; + CLEANUP_FREE /* [sic] */ const char **args = NULL; + mexp_h *h; + const int ovecsize = 12; + int ovector[ovecsize]; + int using_password_auth; + + if (cache_ssh_identity (config) == -1) + return -1; + + /* Are we using password or identity authentication? */ + using_password_auth = config->identity_file == NULL; + + /* Create the scp argument array. */ + if (using_password_auth) + nr_args = 12; + else + nr_args = 14; + args = malloc (sizeof (char *) * nr_args); + if (args == NULL) + error (EXIT_FAILURE, errno, "malloc"); + + j = 0; + args[j++] = "scp"; + args[j++] = "-P"; /* Port. */ + snprintf (port_str, sizeof port_str, "%d", config->port); + args[j++] = port_str; + args[j++] = "-o"; /* Host key will always be novel. */ + args[j++] = "StrictHostKeyChecking=no"; + args[j++] = "-o"; /* ConnectTimeout */ + snprintf (connect_timeout_str, sizeof connect_timeout_str, + "ConnectTimeout=%d", SSH_TIMEOUT); + args[j++] = connect_timeout_str; + if (using_password_auth) { + /* Only use password authentication. */ + args[j++] = "-o"; + args[j++] = "PreferredAuthentications=keyboard-interactive,password"; + } + else { + /* Use identity file (private key). */ + args[j++] = "-o"; + args[j++] = "PreferredAuthentications=publickey"; + args[j++] = "-i"; + args[j++] = config->identity_file; + } + args[j++] = localfile; + if (asprintf (&remote, "%s@%s:%s", + config->username ? config->username : "root", + config->server, remotefile) == -1) + error (EXIT_FAILURE, errno, "asprintf"); + args[j++] = remote; + args[j++] = NULL; + assert (j == nr_args); + +#if DEBUG_STDERR && 0 + size_t i; + + fputs ("scp command: ", stderr); + for (i = 0; i < nr_args - 1; ++i) { + if (i > 0) fputc (' ', stderr); + fputs (args[i], stderr); + } + fputc ('\n', stderr); +#endif + + /* Create the miniexpect handle. */ + h = mexp_spawnv ("scp", (char **) args); + if (h == NULL) { + set_ssh_internal_error ("scp: mexp_spawnv: %m"); + return -1; + } + + /* We want the ssh ConnectTimeout to be less than the miniexpect + * timeout, so that if the server is completely unresponsive we + * still see the error from ssh, not a timeout from miniexpect. The + * obvious solution to this is to set ConnectTimeout (above) and to + * set the miniexpect timeout to be a little bit larger. + */ + mexp_set_timeout (h, SSH_TIMEOUT + 20); + + if (using_password_auth && + config->password && strlen (config->password) > 0) { + CLEANUP_FREE char *ssh_message = NULL; + + /* Wait for the password prompt. */ + wait_password_again: + switch (mexp_expect (h, + (mexp_regexp[]) { + { 100, .re = password_re }, + { 101, .re = ssh_message_re }, + { 0 } + }, ovector, ovecsize)) { + case 100: /* Got password prompt. */ + if (mexp_printf (h, "%s\n", config->password) == -1) { + set_ssh_mexp_error ("mexp_printf"); + mexp_close (h); + return -1; + } + break; + + case 101: + free (ssh_message); + ssh_message = strndup (&h->buffer[ovector[2]], ovector[3]-ovector[2]); + goto wait_password_again; + + case MEXP_EOF: + /* This is where we get to if the user enters an incorrect or + * impossible hostname or port number. Hopefully scp printed an + * error message, and we picked it up and put it in + * 'ssh_message' in case 101 above. If not we have to print a + * generic error instead. + */ + if (ssh_message) + set_ssh_error ("%s", ssh_message); + else + set_ssh_error ("scp closed the connection without printing an error."); + mexp_close (h); + return -1; + + case MEXP_TIMEOUT: + set_ssh_unexpected_timeout ("password prompt"); + mexp_close (h); + return -1; + + case MEXP_ERROR: + set_ssh_mexp_error ("mexp_expect"); + mexp_close (h); + return -1; + + case MEXP_PCRE_ERROR: + set_ssh_pcre_error (); + mexp_close (h); + return -1; + } + } + + /* Wait for the scp subprocess to finish. */ + switch (mexp_expect (h, NULL, NULL, 0)) { + case MEXP_EOF: + break; + + case MEXP_TIMEOUT: + set_ssh_unexpected_timeout ("copying (scp) file"); + mexp_close (h); + return -1; + + case MEXP_ERROR: + set_ssh_mexp_error ("mexp_expect"); + mexp_close (h); + return -1; + + case MEXP_PCRE_ERROR: + set_ssh_pcre_error (); + mexp_close (h); + return -1; + } + + if (mexp_close (h) == -1) { + set_ssh_internal_error ("scp: mexp_close: %m"); + return -1; + } + + return 0; +} + static void add_input_driver (const char *name, size_t len); static void add_output_driver (const char *name, size_t len); static int compatible_version (const char *v2v_version); @@ -955,17 +1131,9 @@ wait_for_prompt (mexp_h *h) } mexp_h * -start_remote_connection (struct config *config, - const char *remote_dir, const char *libvirt_xml, - const char *wrapper_script, const char *dmesg) +start_remote_connection (struct config *config, const char *remote_dir) { mexp_h *h; - char magic[9]; - - if (guestfs_int_random_string (magic, 8) == -1) { - perror ("random_string"); - return NULL; - } h = start_ssh (config, NULL, 1); if (h == NULL) @@ -980,16 +1148,9 @@ start_remote_connection (struct config *config, if (wait_for_prompt (h) == -1) goto error; - /* Write some useful config information to files in the remote directory. */ - if (mexp_printf (h, "echo '%s' > %s/name\n", - config->guestname, remote_dir) == -1) { - set_ssh_mexp_error ("mexp_printf"); - goto error; - } - - if (wait_for_prompt (h) == -1) - goto error; - + /* It's simplest to create the remote 'time' file by running the date + * command, as that won't send any special control characters. + */ if (mexp_printf (h, "date > %s/time\n", remote_dir) == -1) { set_ssh_mexp_error ("mexp_printf"); goto error; @@ -998,62 +1159,6 @@ start_remote_connection (struct config *config, if (wait_for_prompt (h) == -1) goto error; - /* Upload the guest libvirt XML to the remote directory. */ - if (mexp_printf (h, - "cat > '%s/physical.xml' << '__%s__'\n" - "%s" - "__%s__\n", - remote_dir, magic, - libvirt_xml, - magic) == -1) { - set_ssh_mexp_error ("mexp_printf"); - goto error; - } - - if (wait_for_prompt (h) == -1) - goto error; - - /* Upload the wrapper script to the remote directory. */ - if (mexp_printf (h, - "cat > '%s/virt-v2v-wrapper.sh' << '__%s__'\n" - "%s" - "__%s__\n", - remote_dir, magic, - wrapper_script, - magic) == -1) { - set_ssh_mexp_error ("mexp_printf"); - goto error; - } - - if (wait_for_prompt (h) == -1) - goto error; - - if (mexp_printf (h, "chmod +x %s/virt-v2v-wrapper.sh\n", remote_dir) == -1) { - set_ssh_mexp_error ("mexp_printf"); - goto error; - } - - if (wait_for_prompt (h) == -1) - goto error; - - if (dmesg != NULL) { - /* Upload the physical host dmesg to the remote directory. */ - if (mexp_printf (h, - "cat > '%s/dmesg' << '__%s__'\n" - "%s" - "\n" - "__%s__\n", - remote_dir, magic, - dmesg, - magic) == -1) { - set_ssh_mexp_error ("mexp_printf"); - goto error; - } - - if (wait_for_prompt (h) == -1) - goto error; - } - return h; error: diff --git a/p2v/test-virt-p2v-scp.sh b/p2v/test-virt-p2v-scp.sh new file mode 100755 index 0000000..be37a03 --- /dev/null +++ b/p2v/test-virt-p2v-scp.sh @@ -0,0 +1,58 @@ +#!/bin/bash - +# Copyright (C) 2014-2016 Red Hat Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +# This is an scp substitute used by test-virt-p2v.sh. + +TEMP=`getopt \ + -o 'o:P:' \ + -- "$@"` +if [ $? != 0 ]; then + echo "$0: problem parsing the command line arguments" + exit 1 +fi +eval set -- "$TEMP" + +while true ; do + case "$1" in + # Regular arguments that we can just ignore. + -o|-P) + shift 2 + ;; + + --) + shift + break + ;; + *) + echo "$0: internal error ($1)" + exit 1 + ;; + esac +done + +# Hopefully there are two arguments left, the source (local) file +# and a remote file of the form user@server:remote. +if [ $# -ne 2 ]; then + echo "$0: incorrect number of arguments found:" "$@" + exit 1 +fi + +local="$1" +remote="$(echo $2 | awk -F: '{print $2}')" + +# Use the copy command. +exec cp "$local" "$remote" diff --git a/p2v/test-virt-p2v.sh b/p2v/test-virt-p2v.sh index 692894b..e232d42 100755 --- a/p2v/test-virt-p2v.sh +++ b/p2v/test-virt-p2v.sh @@ -50,10 +50,11 @@ d=test-virt-p2v.d rm -rf $d mkdir $d -# We don't want the program under test to run real 'ssh'. It's -# unlikely to work. Therefore create a dummy 'ssh' binary. +# We don't want the program under test to run real 'ssh' or 'scp'. +# They won't work. Therefore create dummy 'ssh' and 'scp' binaries. pushd $d ln -sf ../test-virt-p2v-ssh.sh ssh +ln -sf ../test-virt-p2v-scp.sh scp popd export PATH=$d:$PATH diff --git a/p2v/virt-p2v.pod b/p2v/virt-p2v.pod index 664ac20..70d4748 100644 --- a/p2v/virt-p2v.pod +++ b/p2v/virt-p2v.pod @@ -56,6 +56,10 @@ by virt-p2v, and it will not work if this is disabled on the conversion server. (C<AllowTcpForwarding> must be C<yes> in the L<sshd_config(5)> file on the conversion server). +The scp (secure copy) feature of ssh is required by virt-p2v so it can +send over small files (this is I<not> the method by which disks are +copied). + The conversion server does not need to be a physical machine. It could be a virtual machine, as long as it has sufficient memory and disk space to do the conversion, and as long as the physical machine -- 2.7.4