virt-dib is a new tool to run the elements of diskimage-builder using libguestfs. --- More or less stable now, although with debug stuff here and there; needs initial review, for being included. I would like to have it reviewed at this point, so it can be broadly used. TODO items open: - improve the documentation - review - getting more testing (although it has been successfully tested for a while, not only by myself) - polish .gitignore | 5 + Makefile.am | 1 + appliance/packagelist.in | 5 + configure.ac | 1 + dib/Makefile.am | 144 ++++++++ dib/cmdline.ml | 239 ++++++++++++ dib/dib.ml | 920 +++++++++++++++++++++++++++++++++++++++++++++++ dib/elements.ml | 191 ++++++++++ dib/utils.ml | 137 +++++++ dib/virt-dib.pod | 591 ++++++++++++++++++++++++++++++ po-docs/podfiles | 1 + run.in | 1 + 12 files changed, 2236 insertions(+) create mode 100644 dib/Makefile.am create mode 100644 dib/cmdline.ml create mode 100644 dib/dib.ml create mode 100644 dib/elements.ml create mode 100644 dib/utils.ml create mode 100644 dib/virt-dib.pod diff --git a/.gitignore b/.gitignore index 29f9d6d..054657a 100644 --- a/.gitignore +++ b/.gitignore @@ -118,6 +118,10 @@ Makefile.in /df/stamp-virt-df.pod /df/virt-df /df/virt-df.1 +/dib/.depend +/dib/stamp-virt-dib.pod +/dib/virt-dib +/dib/virt-dib.1 /diff/stamp-virt-diff.pod /diff/virt-diff /diff/virt-diff.1 @@ -241,6 +245,7 @@ Makefile.in /html/virt-copy-out.1.html /html/virt-customize.1.html /html/virt-df.1.html +/html/virt-dib.1.html /html/virt-diff.1.html /html/virt-edit.1.html /html/virt-filesystems.1.html diff --git a/Makefile.am b/Makefile.am index 331a34e..194ee19 100644 --- a/Makefile.am +++ b/Makefile.am @@ -133,6 +133,7 @@ SUBDIRS += \ mllib \ customize \ builder builder/website \ + dib \ resize \ sparsify \ sysprep \ diff --git a/appliance/packagelist.in b/appliance/packagelist.in index 76c7293..160d9e8 100644 --- a/appliance/packagelist.in +++ b/appliance/packagelist.in @@ -257,3 +257,8 @@ ifelse(VALGRIND_DAEMON,1,valgrind) dnl Define this by doing: ./configure --with-extra-packages="..." EXTRA_PACKAGES +curl +qemu-img +debootstrap +apt +which diff --git a/configure.ac b/configure.ac index 1552bff..8194bb6 100644 --- a/configure.ac +++ b/configure.ac @@ -1740,6 +1740,7 @@ AC_CONFIG_FILES([Makefile customize/Makefile daemon/Makefile df/Makefile + dib/Makefile diff/Makefile edit/Makefile erlang/Makefile diff --git a/dib/Makefile.am b/dib/Makefile.am new file mode 100644 index 0000000..8932e64 --- /dev/null +++ b/dib/Makefile.am @@ -0,0 +1,144 @@ +# libguestfs virt-dib tool +# Copyright (C) 2015 Red Hat Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +include $(top_srcdir)/subdir-rules.mk + +EXTRA_DIST = \ + $(SOURCES_ML) $(SOURCES_C) \ + virt-dib.pod + +CLEANFILES = *~ *.annot *.cmi *.cmo *.cmx *.cmxa *.o virt-dib + +SOURCES_ML = \ + utils.ml \ + cmdline.ml \ + elements.ml \ + dib.ml + +SOURCES_C = \ + $(top_srcdir)/mllib/mkdtemp-c.c + +bin_PROGRAMS = + +if HAVE_OCAML + +bin_PROGRAMS += virt-dib + +virt_dib_SOURCES = $(SOURCES_C) +virt_dib_CPPFLAGS = \ + -I. \ + -I$(top_builddir) \ + -I$(top_srcdir)/gnulib/lib -I$(top_builddir)/gnulib/lib \ + -I$(shell $(OCAMLC) -where) \ + -I$(top_srcdir)/gnulib/lib \ + -I$(top_srcdir)/src +virt_dib_CFLAGS = \ + -pthread \ + $(WARN_CFLAGS) $(WERROR_CFLAGS) + +BOBJECTS = \ + $(top_builddir)/mllib/libdir.cmo \ + $(top_builddir)/mllib/config.cmo \ + $(top_builddir)/mllib/common_gettext.cmo \ + $(top_builddir)/mllib/common_utils.cmo \ + $(top_builddir)/mllib/mkdtemp.cmo \ + $(SOURCES_ML:.ml=.cmo) +XOBJECTS = $(BOBJECTS:.cmo=.cmx) + +# -I $(top_builddir)/src/.libs is a hack which forces corresponding -L +# option to be passed to gcc, so we don't try linking against an +# installed copy of libguestfs. +OCAMLPACKAGES = \ + -package str,unix \ + -I $(top_builddir)/src/.libs \ + -I $(top_builddir)/gnulib/lib/.libs \ + -I $(top_builddir)/ocaml \ + -I $(top_builddir)/mllib +if HAVE_OCAML_PKG_GETTEXT +OCAMLPACKAGES += -package gettext-stub +endif + +OCAMLCLIBS = \ + -pthread -lpthread \ + -lutils \ + $(LIBINTL) \ + -lgnu + +OCAMLFLAGS = $(OCAML_FLAGS) $(OCAML_WARN_ERROR) + +if !HAVE_OCAMLOPT +OBJECTS = $(BOBJECTS) +BEST = c +OCAMLLINKFLAGS = mlguestfs.cma -custom +else +OBJECTS = $(XOBJECTS) +BEST = opt +OCAMLLINKFLAGS = mlguestfs.cmxa +endif + +virt_dib_DEPENDENCIES = $(OBJECTS) $(top_srcdir)/ocaml-link.sh +virt_dib_LINK = \ + $(top_srcdir)/ocaml-link.sh -cclib '$(OCAMLCLIBS)' -- \ + $(OCAMLFIND) $(BEST) $(OCAMLFLAGS) $(OCAMLPACKAGES) $(OCAMLLINKFLAGS) \ + $(OBJECTS) -o $@ + +.mli.cmi: + $(OCAMLFIND) ocamlc $(OCAMLFLAGS) $(OCAMLPACKAGES) -c $< -o $@ +.ml.cmo: + $(OCAMLFIND) ocamlc $(OCAMLFLAGS) $(OCAMLPACKAGES) -c $< -o $@ +if HAVE_OCAMLOPT +.ml.cmx: + $(OCAMLFIND) ocamlopt $(OCAMLFLAGS) $(OCAMLPACKAGES) -c $< -o $@ +endif + +# Manual pages and HTML files for the website. + +man_MANS = virt-dib.1 + +noinst_DATA = $(top_builddir)/html/virt-dib.1.html + +virt-dib.1 $(top_builddir)/html/virt-dib.1.html: stamp-virt-dib.pod + +stamp-virt-dib.pod: virt-dib.pod + $(PODWRAPPER) \ + --man virt-dib.1 \ + --html $(top_builddir)/html/virt-dib.1.html \ + --license GPLv2+ \ + $< + touch $@ + +CLEANFILES += stamp-virt-dib.pod + +# Dependencies. +depend: .depend + +.depend: $(wildcard $(abs_srcdir)/*.mli) $(wildcard $(abs_srcdir)/*.ml) + rm -f $@ $@-t + $(OCAMLFIND) ocamldep -I ../ocaml -I $(abs_srcdir) -I $(abs_top_builddir)/mllib $^ | \ + $(SED) 's/ *$$//' | \ + $(SED) -e :a -e '/ *\\$$/N; s/ *\\\n */ /; ta' | \ + $(SED) -e 's,$(abs_srcdir)/,$(builddir)/,g' | \ + sort > $@-t + mv $@-t $@ + +-include .depend + +endif + +DISTCLEANFILES = .depend + +.PHONY: depend docs diff --git a/dib/cmdline.ml b/dib/cmdline.ml new file mode 100644 index 0000000..252465b --- /dev/null +++ b/dib/cmdline.ml @@ -0,0 +1,239 @@ +(* virt-dib + * Copyright (C) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +(* Command line argument parsing. *) + +open Common_gettext.Gettext +open Common_utils + +open Utils + +open Printf + +let parse_args () = + let usage_msg = + sprintf (f_"\ +%s: run diskimage-builder elements to generate images + + virt-dib -B DIB-LIB -p ELEMENTS-PATH elements... + +A short summary of the options is given below. For detailed help please +read the man page virt-dib(1). +") + prog in + + let elements = ref [] in + let append_element element = + elements := element :: !elements in + + let excluded_elements = ref [] in + let append_excluded_element element = + excluded_elements := element :: !excluded_elements in + + let element_paths = ref [] in + let append_element_path arg = + element_paths := arg :: !element_paths in + + let excluded_scripts = ref [] in + let append_excluded_script arg = + excluded_scripts := arg :: !excluded_scripts in + + let debug = ref 0 in + + let basepath = ref "" in + + let image_name = ref "image" in + + let fs_type = ref "ext4" in + + let size = ref (unit_GB 5) in + let set_size arg = size := parse_size arg in + + let memsize = ref None in + let set_memsize arg = memsize := Some arg in + + let network = ref true in + + let smp = ref None in + let set_smp arg = smp := Some arg in + + let formats = ref ["qcow2"] in + let set_format arg = + let fmts = string_nsplit "," arg in + let fmts = remove_dups fmts in + List.iter ( + function + | "qcow2" | "tar" | "raw" | "vhd" -> () + | fmt -> + error (f_"invalid format '%s' in --formats") fmt + ) fmts; + formats := fmts in + + let envvars = ref [] in + let append_envvar arg = + envvars := arg :: !envvars in + + let use_base = ref true in + + let arch = ref "" in + + let drive = ref None in + let set_drive arg = drive := Some arg in + + let root_label = ref None in + let set_root_label arg = root_label := Some arg in + + let install_type = ref "source" in + + let image_cache = ref None in + let set_image_cache arg = image_cache := Some arg in + + let compressed = ref true in + + let delete_on_failure = ref true in + + let is_ramdisk = ref false in + let ramdisk_element = ref "ramdisk" in + + let qemu_img_options = ref None in + let set_qemu_img_options arg = qemu_img_options := Some arg in + + let mkfs_options = ref None in + let set_mkfs_options arg = mkfs_options := Some arg in + + let machine_readable = ref false in + + let extra_packages = ref [] in + let append_extra_packages arg = + extra_packages := List.rev (string_nsplit "," arg) @ !extra_packages in + + let argspec = [ + "--short-options", Arg.Unit display_short_options, " " ^ s_"List short options"; + "--long-options", Arg.Unit display_long_options, " " ^ s_"List long options"; + + "-p", Arg.String append_element_path, "path" ^ " " ^ s_"Add new a elements location"; + "--element-path", Arg.String append_element_path, "path" ^ " " ^ s_"Add new a elements location"; + "--exclude-element", Arg.String append_excluded_element, + "element" ^ " " ^ s_"Exclude the specified element"; + "--exclude-script", Arg.String append_excluded_script, + "script" ^ " " ^ s_"Exclude the specified script"; + "--envvar", Arg.String append_envvar, "envvar[=value]" ^ " " ^ s_"Carry/set this environment variable"; + "-n", Arg.Clear use_base, " " ^ s_"Skip the inclusion of the 'base' element"; + "--root-label", Arg.String set_root_label, "label" ^ " " ^ s_"Label for the root fs"; + "--install-type", Arg.Set_string install_type, "type" ^ " " ^ s_"Installation type"; + "--image-cache", Arg.String set_image_cache, "directory" ^ " " ^ s_"Location for cached images"; + "-u", Arg.Clear compressed, " " ^ "Do not compress the qcow2 image"; + "--qemu-img-options", Arg.String set_qemu_img_options, + "option" ^ " " ^ s_"Add qemu-img options"; + "--mkfs-options", Arg.String set_mkfs_options, + "option" ^ " " ^ s_"Add mkfs options"; + "--extra-packages", Arg.String append_extra_packages, + "pkg,..." ^ " " ^ s_"Add extra packages to install"; + + "--ramdisk", Arg.Set is_ramdisk, " " ^ "Switch to a ramdisk build"; + "--ramdisk-element", Arg.Set_string ramdisk_element, "name" ^ " " ^ s_"Main element for building ramdisks"; + + "--name", Arg.Set_string image_name, "name" ^ " " ^ s_"Name of the image"; + "--fs-type", Arg.Set_string fs_type, "fs" ^ " " ^ s_"Filesystem for the image"; + "--size", Arg.String set_size, "size" ^ " " ^ s_"Set output disk size"; + "--formats", Arg.String set_format, "qcow2,tgz,..." ^ " " ^ s_"Output formats"; + "--arch", Arg.Set_string arch, "arch" ^ " " ^ s_"Output architecture"; + "--drive", Arg.String set_drive, "path" ^ " " ^ s_"Optional drive for caches"; + + "-m", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size"; + "--memsize", Arg.Int set_memsize, "mb" ^ " " ^ s_"Set memory size"; + "--network", Arg.Set network, " " ^ s_"Enable appliance network (default)"; + "--no-network", Arg.Clear network, " " ^ s_"Disable appliance network"; + "--smp", Arg.Int set_smp, "vcpus" ^ " " ^ s_"Set number of vCPUs"; + "--no-delete-on-failure", Arg.Clear delete_on_failure, + " " ^ s_"Don't delete output file on failure"; + "--machine-readable", Arg.Set machine_readable, " " ^ s_"Make output machine readable"; + + "-V", Arg.Unit print_version_and_exit, " " ^ s_"Display version and exit"; + "--version", Arg.Unit print_version_and_exit, " " ^ s_"Display version and exit"; + "-v", Arg.Unit set_verbose, " " ^ s_"Enable libguestfs debugging messages"; + "--verbose", Arg.Unit set_verbose, " " ^ s_"Enable libguestfs debugging messages"; + "-x", Arg.Unit set_trace, " " ^ s_"Enable tracing of libguestfs calls"; + "--debug", Arg.Set_int debug, "level" ^ " " ^ s_"Set debug level"; + "-B", Arg.Set_string basepath, "path" ^ " " ^ s_"Base path of diskimage-builder library"; + ] in + + let argspec = + let cmp (arg1, _, _) (arg2, _, _) = + let arg1 = skip_dashes arg1 and arg2 = skip_dashes arg2 in + compare (String.lowercase arg1) (String.lowercase arg2) + in + List.sort cmp argspec in + let argspec = Arg.align argspec in + long_options := argspec; + + Arg.parse argspec append_element usage_msg; + + let debug = !debug in + let basepath = !basepath in + let elements = List.rev !elements in + let excluded_elements = List.rev !excluded_elements in + let element_paths = List.rev !element_paths in + let excluded_scripts = List.rev !excluded_scripts in + let image_name = !image_name in + let fs_type = !fs_type in + let size = !size in + let memsize = !memsize in + let network = !network in + let smp = !smp in + let formats = !formats in + let envvars = !envvars in + let use_base = !use_base in + let arch = !arch in + let drive = !drive in + let root_label = !root_label in + let install_type = !install_type in + let image_cache = !image_cache in + let compressed = !compressed in + let delete_on_failure = !delete_on_failure in + let is_ramdisk = !is_ramdisk in + let ramdisk_element = !ramdisk_element in + let qemu_img_options = !qemu_img_options in + let mkfs_options = !mkfs_options in + let machine_readable = !machine_readable in + let extra_packages = List.rev !extra_packages in + + (* No elements and machine-readable mode? Print some facts. *) + if elements = [] && machine_readable then ( + printf "virt-dib\n"; + printf "output:qcow2\n"; + printf "output:tar\n"; + printf "output:raw\n"; + printf "output:vhd\n"; + exit 0 + ); + + if basepath = "" then + error (f_"-B must be specified"); + + if formats = [] then + error (f_"the list of output formats cannot be empty"); + + if elements = [] then + error (f_"at least one distribution root element must be specified"); + + debug, basepath, elements, excluded_elements, element_paths, + excluded_scripts, use_base, drive, + image_name, fs_type, size, root_label, install_type, image_cache, compressed, + qemu_img_options, mkfs_options, is_ramdisk, ramdisk_element, extra_packages, + memsize, network, smp, delete_on_failure, formats, arch, envvars diff --git a/dib/dib.ml b/dib/dib.ml new file mode 100644 index 0000000..3dba88f --- /dev/null +++ b/dib/dib.ml @@ -0,0 +1,920 @@ +(* virt-dib + * Copyright (C) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +open Common_gettext.Gettext +open Common_utils + +open Cmdline +open Utils +open Elements + +open Printf + +module G = Guestfs + +let exclude_elements elements excluded_elements = + match excluded_elements with + | [] -> + (* No elements to filter out, so just don't bother iterating through + * the elements. *) + elements + | excl -> StringSet.filter (not_in_list excl) elements + +let read_envvars envvars = + filter_map ( + fun var -> + let i = string_find var "=" in + if i = -1 then ( + try Some (var, Sys.getenv var) + with Not_found -> None + ) else ( + let len = String.length var in + Some (String.sub var 0 i, String.sub var (i + 1) (len - i - 1)) + ) + ) envvars + +let read_dib_envvars () = + let vars = Array.to_list (Unix.environment ()) in + let vars = List.filter (fun x -> string_prefix x "DIB_") vars in + let vars = List.map (fun x -> x ^ "\n") vars in + String.concat "" vars + +let make_dib_args args = + let args = Array.to_list args in + let rec quote_args = function + | [] -> "" + | x :: xs -> " " ^ (quote x) ^ quote_args xs + in + match args with + | [] -> "" + | app :: xs -> app ^ quote_args xs + +let write_script fn text = + let oc = open_out fn in + output_string oc text; + flush oc; + close_out oc; + Unix.chmod fn 0o755 + +let prepare_external ~dib_args ~dib_vars ~out_name ~root_label ~rootfs_uuid + ~image_cache ~arch ~network ~debug + destdir libdir hooksdir tmpdir fakebindir all_elements element_paths = + let network_string = if network then "" else "1" in + + let run_extra = sprintf "\ +#!/bin/bash +%s +target_dir=$1 +shift +script=$1 +shift + +export PATH=%s:$PATH + +# d-i-b variables +export TMP_MOUNT_PATH=%s +export DIB_OFFLINE=%s +export IMAGE_NAME=\"%s\" +export DIB_ROOT_LABEL=\"%s\" +export DIB_IMAGE_ROOT_FS_UUID=%s +export DIB_IMAGE_CACHE=\"%s\" +export _LIB=%s +export ARCH=%s +export TMP_HOOKS_PATH=%s +export DIB_ARGS=\"%s\" +export IMAGE_ELEMENT=\"%s\" +export ELEMENTS_PATH=\"%s\" +export DIB_ENV=%s +export TMPDIR=\"${TMP_MOUNT_PATH}/tmp\" +export TMP_DIR=\"${TMPDIR}\" +export DIB_DEBUG_TRACE=%d + +ENVIRONMENT_D_DIR=$target_dir/../environment.d + +if [ -d $ENVIRONMENT_D_DIR ] ; then + env_files=$(find $ENVIRONMENT_D_DIR -maxdepth 1 -xtype f | \ + grep -E \"/[0-9A-Za-z_\\.-]+$\" | \ + LANG=C sort -n) + for env_file in $env_files ; do + source $env_file + done +fi + +$target_dir/$script +" + (if debug >= 1 then "set -x\n" else "") + fakebindir + (quote tmpdir) + network_string + out_name + root_label + rootfs_uuid + image_cache + (quote libdir) + arch + (quote hooksdir) + dib_args + (String.concat " " (StringSet.elements all_elements)) + (String.concat ":" element_paths) + (quote dib_vars) + debug in + write_script (destdir // "run-part-extra.sh") run_extra; + + (* Needed as TMPDIR for the extra-data hooks *) + do_mkdir (tmpdir // "tmp") + +let prepare_aux ~envvars ~dib_args ~dib_vars ~log_file ~out_name ~rootfs_uuid + ~arch ~network ~root_label ~install_type ~debug ~extra_packages + destdir all_elements = + let envvars_string = List.map ( + fun (var, value) -> + sprintf "export %s=%s" var (quote value) + ) envvars in + let network_string = if network then "" else "1" in + + let script_run_part = sprintf "\ +#!/bin/bash +%s +sysroot=$1 +shift +mysysroot=$1 +shift +blockdev=$1 +shift +target_dir=$1 +shift +new_wd=$1 +shift +script=$1 +shift + +# user variables +%s + +# system variables +export HOME=$mysysroot/tmp/aux/perm/home +export PATH=$mysysroot/tmp/aux/hooks/bin:$PATH +export TMP=$mysysroot/tmp +export TMPDIR=$TMP +export TMP_DIR=$TMP + +# d-i-b variables +export TMP_MOUNT_PATH=$sysroot +export TARGET_ROOT=$sysroot +export DIB_OFFLINE=%s +export IMAGE_NAME=\"%s\" +export DIB_IMAGE_ROOT_FS_UUID=%s +export DIB_IMAGE_CACHE=$HOME/.cache/image-create +export DIB_ROOT_LABEL=\"%s\" +export _LIB=$mysysroot/tmp/aux/lib +export _PREFIX=$mysysroot/tmp/aux/elements +export ARCH=%s +export TMP_HOOKS_PATH=$mysysroot/tmp/aux/hooks +export DIB_ARGS=\"%s\" +export DIB_MANIFEST_SAVE_DIR=\"$mysysroot/tmp/aux/out/${IMAGE_NAME}.d\" +export IMAGE_BLOCK_DEVICE=$blockdev +export IMAGE_ELEMENT=\"%s\" +export DIB_ENV=%s +export DIB_DEBUG_TRACE=%d +export DIB_NO_TMPFS=1 + +export TMP_BUILD_DIR=$mysysroot/tmp/aux +export TMP_IMAGE_DIR=$mysysroot/tmp/aux + +if [ -n \"$mysysroot\" ]; then + export PATH=$mysysroot/tmp/aux/fake-bin:$PATH +else + export PATH=\"$PATH:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin\" +fi + +ENVIRONMENT_D_DIR=$target_dir/../environment.d + +if [ -d $ENVIRONMENT_D_DIR ] ; then + env_files=$(find $ENVIRONMENT_D_DIR -maxdepth 1 -xtype f | \ + grep -E \"/[0-9A-Za-z_\\.-]+$\" | \ + LANG=C sort -n) + for env_file in $env_files ; do + source $env_file + done +fi + +if [ -n \"$new_wd\" ]; then + cd \"$mysysroot/$new_wd\" +fi + +$target_dir/$script +" + (if debug >= 1 then "set -x\n" else "") + (String.concat "\n" envvars_string) + network_string + out_name + rootfs_uuid + root_label + arch + dib_args + (String.concat " " (StringSet.elements all_elements)) + (quote dib_vars) + debug in + write_script (destdir // "run-part.sh") script_run_part; + let script_run_and_log = "\ +#!/bin/bash +logfile=$1 +shift +exec 3>&1 +exit `( ( ( $(dirname $0)/run-part.sh \"$@\" ) 2>&1 3>&-; echo $? >&4) | tee -a $logfile >&3 >&2) 4>&1` +" in + write_script (destdir // "run-and-log.sh") script_run_and_log; + + (* Create the fake sudo support. *) + do_mkdir (destdir // "fake-bin"); + let fake_sudo = "\ +#!/bin/bash + +SCRIPTNAME=fake-sudo + +ARGS_SHORT=\"EHiu:\" +ARGS_LONG=\"\" +TEMP=`POSIXLY_CORRECT=1 getopt ${ARGS_SHORT:+-o $ARGS_SHORT} ${ARGS_LONG:+--long $ARGS_LONG} \ + -n \"$SCRIPTNAME\" -- \"$@\"` +if [ $? != 0 ]; then echo \"$SCRIPTNAME: terminating...\" >&2 ; exit 1 ; fi +eval set -- \"$TEMP\" + +preserve_env= +set_home= +login_shell= +user= + +while true; do + case \"$1\" in + -E) preserve_env=1; shift;; + -H) set_home=1; shift;; + -i) login_shell=1; shift;; + -u) user=$2; shift 2;; + --) shift; break;; + *) echo \"$SCRIPTNAME: internal arguments error\"; exit 1;; + esac +done + +if [ -n \"$user\" ]; then + if [ $user != root -a $user != `whoami` ]; then + echo \"$SCRIPTNAME: cannot use the sudo user $user, only root and $(whoami) handled\" >&2 + exit 1 + fi +fi + +if [ -z \"$preserve_env\" ]; then + for envvar in `env | grep '^\\w' | cut -d= -f1`; do + case \"$envvar\" in + PATH | USER | USERNAME | HOSTNAME | TERM | LANG | HOME | SHELL | LOGNAME ) ;; + *) unset $envvar ;; + esac + done +fi + +cmd=$1 +shift +$cmd \"$@\" +" in + write_script (destdir // "fake-bin" // "sudo") fake_sudo; + (* Pick dib-run-parts from the host, if available, otherwise put + * a fake executable which will error out if used. + *) + (try + let loc = which "dib-run-parts" in + do_cp loc (destdir // "fake-bin") + with Tool_not_found _ -> + let fake_dib_run_parts = "\ +#!/bin/sh +echo \"Please install dib-run-parts on the host\" +exit 1 +" in + write_script (destdir // "fake-bin" // "dib-run-parts") fake_dib_run_parts; + ); + + (* Write the custom hooks. *) + let script_install_type_env = sprintf "\ +export DIB_DEFAULT_INSTALLTYPE=${DIB_DEFAULT_INSTALLTYPE:-\"%s\"} +" + install_type in + write_script (destdir // "hooks" // "environment.d" // "11-dib-install-type.bash") script_install_type_env; + + (* Write install-packages.sh if needed. *) + if extra_packages <> [] then ( + let script_install_packages = sprintf "\ +#!/bin/bash +install-packages %s +" + (String.concat " " extra_packages) in + write_script (destdir // "install-packages.sh") script_install_packages; + ); + + do_mkdir (destdir // "perm") + +let timing_output ~target_name entries timings = + let buf = Buffer.create 4096 in + Buffer.add_string buf "----------------------- PROFILING -----------------------\n"; + Buffer.add_char buf '\n'; + bprintf buf "Target: %s\n" target_name; + Buffer.add_char buf '\n'; + bprintf buf "%-40s %9s\n" "Script" "Seconds"; + bprintf buf "%-40s %9s\n" "---------------------------------------" "----------"; + Buffer.add_char buf '\n'; + List.iter ( + fun x -> + bprintf buf "%-40s %10.3f\n" x (Hashtbl.find timings x); + ) entries; + Buffer.add_char buf '\n'; + Buffer.add_string buf "--------------------- END PROFILING ---------------------\n"; + Buffer.contents buf + +type sysroot_type = + | In + | Out + | Subroot + +let timed_run fn = + let time_before = Unix.gettimeofday () in + fn (); + let time_after = Unix.gettimeofday () in + time_after -. time_before + +let run_parts ~debug ~sysroot ~blockdev ~log_file ?(new_wd = "") + (g : Guestfs.guestfs) hook_name scripts = + let hook_dir = "/tmp/aux/hooks/" ^ hook_name in + let scripts = List.sort digit_prefix_compare scripts in + let outbuf = Buffer.create 16384 in + let timings = Hashtbl.create 13 in + let new_wd = + match sysroot, new_wd with + | (Out|Subroot), "" -> "''" + | _, dir -> dir in + List.iter ( + fun x -> + message (f_"Running: %s/%s") hook_name x; + g#write_append log_file (sprintf "Running %s/%s...\n" hook_name x); + let out = ref "" in + let run () = + let outstr = + match sysroot with + | In -> + g#sh (sprintf "/tmp/aux/run-and-log.sh '%s' '' '' '%s' '%s' '%s' '%s'" log_file blockdev hook_dir new_wd x) + | Out -> + g#debug "sh" [| "/sysroot/tmp/aux/run-and-log.sh"; "/sysroot" ^ log_file; "/sysroot"; "/sysroot"; blockdev; "/sysroot" ^ hook_dir; new_wd; x |] + | Subroot -> + g#debug "sh" [| "/sysroot/tmp/aux/run-and-log.sh"; "/sysroot" ^ log_file; "/sysroot/subroot"; "/sysroot"; blockdev; "/sysroot" ^ hook_dir; new_wd; x |] in + out := outstr; + Buffer.add_string outbuf outstr in + let delta_t = timed_run run in + Buffer.add_char outbuf '\n'; + out := ensure_trailing_newline !out; + printf "%s%!" !out; + if debug >= 1 then ( + printf "%s completed after %.3f s\n" x delta_t + ); + Hashtbl.add timings x delta_t; + ) scripts; + g#write_append log_file (timing_output ~target_name:hook_name scripts timings); + flush_all (); + Buffer.contents outbuf + +let run_parts_host ~debug hooks_dir hook_name scripts run_script = + let hook_dir = hooks_dir // hook_name in + let scripts = List.sort digit_prefix_compare scripts in + let timings = Hashtbl.create 13 in + List.iter ( + fun x -> + message (f_"Running: %s/%s") hook_name x; + let cmd = sprintf "%s %s %s" (quote run_script) (quote hook_dir) (quote x) in + let run () = + run_command cmd in + let delta_t = timed_run run in + if debug >= 1 then ( + printf "\n"; + printf "%s completed after %.3f s\n" x delta_t + ); + Hashtbl.add timings x delta_t; + ) scripts; + if debug >= 1 then ( + print_string (timing_output ~target_name:hook_name scripts timings) + ); + flush_all () + +let run_install_packages ~debug ~blockdev ~log_file + (g : Guestfs.guestfs) packages = + let pkgs_string = String.concat " " packages in + message (f_"Installing: %s") pkgs_string; + g#write_append log_file (sprintf "Installing %s...\n" pkgs_string); + let out = g#sh (sprintf "/tmp/aux/run-and-log.sh '%s' '' '' '%s' '/tmp/aux' '' 'install-packages.sh'" log_file blockdev) in + let out = ensure_trailing_newline out in + if debug >= 1 then ( + printf "%s%!" out; + printf "package installation completed\n"; + ); + flush_all (); + out + +let main () = + let debug, basepath, elements, excluded_elements, element_paths, + excluded_scripts, use_base, drive, + image_name, fs_type, size, root_label, install_type, image_cache, compressed, + qemu_img_options, mkfs_options, is_ramdisk, ramdisk_element, extra_packages, + memsize, network, smp, delete_on_failure, formats, arch, envvars = + parse_args () in + + (* Check that the specified base directory of diskimage-builder + * has the "die" script in it, so we know the directory is the + * right one (hopefully so, at least). + *) + if not (Sys.file_exists (basepath // "die")) then + error (f_"the specified base path is not the diskimage-builder library"); + + (* Check for required tools. *) + require_tool "uuidgen"; + if List.mem "qcow2" formats then + require_tool "qemu-img"; + if List.mem "vhd" formats then + require_tool "vhd-util"; + + let image_name_d = image_name ^ ".d" in + + let tmpdir = Mkdtemp.temp_dir "dib." "" in + rmdir_on_exit tmpdir; + let auxtmpdir = tmpdir // "aux" in + do_mkdir auxtmpdir; + let hookstmpdir = auxtmpdir // "hooks" in + do_mkdir (hookstmpdir // "environment.d"); (* Just like d-i-b does. *) + let extradatatmpdir = tmpdir // "extra-data" in + do_mkdir extradatatmpdir; + do_mkdir (auxtmpdir // "out" // image_name_d); + let elements = if use_base then ["base"] @ elements else elements in + let elements = if is_ramdisk then [ramdisk_element] @ elements else elements in + message (f_"Elements: %s") (String.concat " " elements); + if debug >= 1 then ( + printf "tmpdir: %s\n" tmpdir; + printf "element paths: %s\n" (String.concat ":" element_paths); + ); + + let loaded_elements = load_elements ~debug element_paths in + if debug >= 1 then ( + printf "loaded elements:\n"; + Hashtbl.iter ( + fun k v -> + printf " %s => %s\n" k v.directory; + Hashtbl.iter ( + fun k v -> + printf "\t%-20s %s\n" k (String.concat " " (List.sort compare v)) + ) v.hooks; + ) loaded_elements; + printf "\n"; + ); + let all_elements = load_dependencies elements loaded_elements in + let all_elements = exclude_elements all_elements + (excluded_elements @ builtin_elements_blacklist) in + + message (f_"Expanded elements: %s") (String.concat " " (StringSet.elements all_elements)); + + let envvars = read_envvars envvars in + message (f_"Carried environment variables: %s") (String.concat " " (List.map fst envvars)); + if debug >= 1 then ( + printf "carried over envvars:\n"; + if envvars <> [] then + List.iter ( + fun (var, value) -> + printf " %s=%s\n" var value + ) envvars + else + printf " (none)\n"; + printf "\n"; + ); + let dib_args = make_dib_args Sys.argv in + let dib_vars = read_dib_envvars () in + if debug >= 1 then ( + printf "DIB args:\n%s\n" dib_args; + printf "DIB envvars:\n%s\n" dib_vars + ); + + message (f_"Preparing auxiliary data"); + + copy_elements all_elements loaded_elements + (excluded_scripts @ builtin_scripts_blacklist) hookstmpdir; + + (* Re-read the hook scripts from the hooks dir, as d-i-b (and we too) + * has basically copied over anything found in elements. + *) + let final_hooks = load_hooks ~debug hookstmpdir in + + let log_file = "/tmp/aux/perm/" ^ (log_filename ()) in + + let arch = + match arch with + | "" -> current_arch () + | arch -> arch in + + let root_label = + match root_label with + | None -> + (* XFS has a limit of 12 characters for filesystem labels. + * Not changing the default for other filesystems to maintain + * backwards compatibility. + *) + (match fs_type with + | "xfs" -> "img-rootfs" + | _ -> "cloudimg-rootfs") + | Some label -> label in + + let image_cache = + match image_cache with + | None -> Sys.getenv "HOME" // ".cache" // "image-create" + | Some dir -> dir in + do_mkdir image_cache; + + let rootfs_uuid = uuidgen () in + + let formats_img, formats_archive = List.partition ( + function + | "qcow2" | "raw" | "vhd" -> true + | _ -> false + ) formats in + let formats_img_nonraw = List.filter ((<>) "raw") formats_img in + + prepare_aux ~envvars ~dib_args ~dib_vars ~log_file ~out_name:image_name ~rootfs_uuid + ~arch ~network ~root_label ~install_type ~debug ~extra_packages + auxtmpdir all_elements; + + let delete_output_file = ref delete_on_failure in + let delete_file () = + if !delete_output_file then ( + List.iter ( + fun fmt -> + try Unix.unlink (output_filename image_name fmt) with _ -> () + ) formats + ) + in + at_exit delete_file; + + prepare_external ~dib_args ~dib_vars ~out_name:image_name ~root_label ~rootfs_uuid + ~image_cache ~arch ~network ~debug + tmpdir basepath hookstmpdir extradatatmpdir (auxtmpdir // "fake-bin") + all_elements element_paths; + + let run_hook_host hook = + try + let scripts = Hashtbl.find final_hooks hook in + if debug >= 1 then ( + printf "Running hooks for %s...\n%!" hook; + ); + run_parts_host ~debug hookstmpdir hook scripts + (tmpdir // "run-part-extra.sh") + with Not_found -> () + and run_hook ~blockdev ~sysroot ?(new_wd = "") (g : Guestfs.guestfs) hook = + try + let scripts = Hashtbl.find final_hooks hook in + if debug >= 1 then ( + printf "Running hooks for %s...\n%!" hook; + ); + run_parts ~debug ~sysroot ~blockdev ~log_file ~new_wd g hook scripts + with Not_found -> "" in + + run_hook_host "extra-data.d"; + + let copy_in (g : Guestfs.guestfs) srcdir destdir = + let desttar = Filename.temp_file ~temp_dir:tmpdir "virt-dib." ".tar.gz" in + let cmd = sprintf "tar czf %s -C %s --owner=root --group=root ." + (quote desttar) (quote srcdir) in + run_command cmd; + g#mkdir_p destdir; + g#tar_in ~compress:"gzip" desttar destdir; + Sys.remove desttar in + + let copy_preserve_in (g : Guestfs.guestfs) srcdir destdir = + let desttar = Filename.temp_file ~temp_dir:tmpdir "virt-dib." ".tar.gz" in + let remotetar = "/tmp/aux/" ^ (Filename.basename desttar) in + let cmd = sprintf "tar czf %s -C %s --owner=root --group=root ." + (quote desttar) (quote srcdir) in + run_command cmd; + g#upload desttar remotetar; + let verbose_flag = if debug > 0 then "v" else "" in + ignore (g#debug "sh" [| "tar"; "-C"; "/sysroot" ^ destdir; "--no-overwrite-dir"; "-x" ^ verbose_flag ^ "zf"; "/sysroot" ^ remotetar |]); + Sys.remove desttar; + g#rm remotetar in + + if debug >= 1 then + ignore (Sys.command (sprintf "tree -ps %s" (quote tmpdir))); + + message (f_"Opening the disks"); + + let is_ramdisk_build = is_ramdisk || StringSet.mem "ironic-agent" all_elements in + + let g, tmpdisk, tmpdiskfmt, drive_partition = + let g = new G.guestfs () in + if verbose () then g#set_verbose true; + if trace () then g#set_trace true; + + (match memsize with None -> () | Some memsize -> g#set_memsize memsize); + (match smp with None -> () | Some smp -> g#set_smp smp); + g#set_network network; + + (* Make sure to turn SELinux off to avoid awkward interactions + * between the appliance kernel and applications/libraries interacting + * with SELinux xattrs. + *) + g#set_selinux false; + + (* Main disk with the built image. *) + let fmt = "raw" in + let fn = + (* If "raw" is among the selected outputs, use it as main backing + * disk, otherwise create a temporary disk. + *) + if not is_ramdisk_build && List.mem "raw" formats_img then image_name + else Filename.temp_file ~temp_dir:tmpdir "image." "" in + let fn = output_filename fn fmt in + (* Produce the output image. *) + g#disk_create fn fmt size; + g#add_drive ~readonly:false ~format:fmt fn; + + (* Helper drive for elements and binaries. *) + g#add_drive_scratch (unit_GB 5); + + (match drive with + | None -> + g#add_drive_scratch (unit_GB 5) + | Some drive -> + g#add_drive drive; + ); + + g#launch (); + + (* Prepare the /aux partition. *) + g#mkfs "ext2" "/dev/sdb"; + g#mount "/dev/sdb" "/"; + + copy_in g auxtmpdir "/"; + copy_in g basepath "/lib"; + g#umount "/"; + + (* Prepare the /aux/perm partition. *) + let drive_partition = + match drive with + | None -> + g#mkfs "ext2" "/dev/sdc"; + "/dev/sdc" + | Some _ -> + let partitions = Array.to_list (g#list_partitions ()) in + (match partitions with + | [] -> "/dev/sdc" + | p -> + let p = List.filter (fun x -> string_prefix x "/dev/sdc") p in + if p = [] then + error (f_"no partitions found in the helper drive"); + List.hd p + ) in + g#mount drive_partition "/"; + g#mkdir_p "/home/.cache/image-create"; + g#umount "/"; + + g, fn, fmt, drive_partition in + + let mount_aux () = + g#mkmountpoint "/tmp/aux"; + g#mount "/dev/sdb" "/tmp/aux"; + g#mount drive_partition "/tmp/aux/perm" in + + (* Small kludge: try to umount all first: if that fails, use lsof and fuser + * to find out what might have caused the failure, run udevadm to try + * to settle things down (udev, you never know), and try umount all again. + *) + let checked_umount_all () = + try g#umount_all () + with G.Error _ -> + if debug >= 1 then ( + (try printf "lsof:\n%s\nEND\n" (g#debug "sh" [| "lsof"; "/sysroot"; |]) with _ -> ()); + (try printf "fuser:\n%s\nEND\n" (g#debug "sh" [| "fuser"; "-v"; "-m"; "/sysroot"; |]) with _ -> ()); + (try printf "losetup:\n%s\nEND\n" (g#debug "sh" [| "losetup"; "--list"; "--all" |]) with _ -> ()); + ); + ignore (g#debug "sh" [| "udevadm"; "--debug"; "settle" |]); + g#umount_all () + in + + g#mkmountpoint "/tmp"; + mount_aux (); + + let blockdev = + (* Setup a loopback device, just like d-i-b would tie an image in the host + * environment. + *) + let run_losetup device = + let lines = g#debug "sh" [| "losetup"; "--show"; "-f"; device |] in + let lines = string_nsplit "\n" lines in + let lines = List.filter ((<>) "") lines in + (match lines with + | [] -> device + | x :: _ -> x + ) in + let blockdev = run_losetup "/dev/sda" in + + let run_hook_out_eval hook envvar = + let lines = run_hook ~sysroot:Out ~blockdev g hook in + let lines = string_nsplit "\n" lines in + let lines = List.filter ((<>) "") lines in + if lines = [] then None + else (try Some (var_from_lines envvar lines) with _ -> None) in + + (match run_hook_out_eval "block-device.d" "IMAGE_BLOCK_DEVICE" with + | None -> blockdev + | Some x -> x + ) in + + let rec run_hook_out ?(new_wd = "") hook = + do_run_hooks_noout ~sysroot:Out ~new_wd hook + and run_hook_in hook = + do_run_hooks_noout ~sysroot:In hook + and run_hook_subroot hook = + do_run_hooks_noout ~sysroot:Subroot hook + and do_run_hooks_noout ~sysroot ?(new_wd = "") hook = + ignore (run_hook ~sysroot ~blockdev ~new_wd g hook) in + + g#sync (); + checked_umount_all (); + flush_all (); + + message (f_"Setting up the destination root"); + + (* Create and mount the target filesystem. *) + let mkfs_options = + match mkfs_options with + | None -> [] + | Some o -> [ o ] in + let mkfs_options = + (match fs_type with + | "ext4" -> + (* Very conservative to handle images being resized a lot + * Without -J option specified, default journal size will be set to 32M + * and online resize will be failed with error of needs too many credits. + *) + [ "-i"; "4096"; "-J"; "size=64" ] + | _ -> [] + ) @ mkfs_options @ [ "-t"; fs_type; blockdev ] in + ignore (g#debug "sh" (Array.of_list ([ "mkfs" ] @ mkfs_options))); + g#set_label blockdev root_label; + (match fs_type with + | x when string_prefix x "ext" -> g#set_uuid blockdev rootfs_uuid + | _ -> ()); + g#mount blockdev "/"; + g#mkmountpoint "/tmp"; + mount_aux (); + g#mkdir "/subroot"; + + run_hook_subroot "root.d"; + + g#sync (); + g#umount "/tmp/aux/perm"; + g#umount "/tmp/aux"; + g#rm_rf "/tmp"; + let subroot_items = + let l = Array.to_list (g#ls "/subroot") in + let l_lost_plus_found, l = List.partition ((=) "lost+found") l in + if l_lost_plus_found <> [] then ( + g#rm_rf "/subroot/lost+found"; + ); + l in + List.iter (fun x -> g#mv ("/subroot/" ^ x) ("/" ^ x)) subroot_items; + g#rmdir "/subroot"; + (* Check /tmp exists already. *) + ignore (g#is_dir "/tmp"); + mount_aux (); + g#ln_s "aux/hooks" "/tmp/in_target.d"; + + copy_preserve_in g extradatatmpdir "/"; + + run_hook_in "pre-install.d"; + + if extra_packages <> [] then + ignore (run_install_packages ~debug ~blockdev ~log_file g extra_packages); + + run_hook_in "install.d"; + + run_hook_in "post-install.d"; + + (* Unmount and remount the image, as d-i-b does at this point too. *) + g#sync (); + checked_umount_all (); + flush_all (); + g#mount blockdev "/"; + (* Check /tmp/aux still exists. *) + ignore (g#is_dir "/tmp/aux"); + g#mount "/dev/sdb" "/tmp/aux"; + g#mount drive_partition "/tmp/aux/perm"; + + run_hook_in "finalise.d"; + + let out_dir = "/tmp/aux/out/" ^ image_name_d in + + run_hook_out ~new_wd:out_dir "cleanup.d"; + + g#sync (); + + if g#ls out_dir <> [||] then ( + message (f_"Extracting data out of the image"); + do_mkdir image_name_d; + g#copy_out out_dir "."; + ); + + (* Unmount everything, and remount only the root to cleanup + * its /tmp; this way we should be pretty sure that there is + * nothing left mounted over /tmp, so it is safe to empty it. + *) + checked_umount_all (); + flush_all (); + g#mount blockdev "/"; + Array.iter (fun x -> g#rm_rf ("/tmp/" ^ x)) (g#ls "/tmp"); + + flush_all (); + + List.iter ( + fun fmt -> + let fn = output_filename image_name fmt in + match fmt with + | "tar" -> + message (f_"Compressing the image as tar"); + g#tar_out ~excludes:[| "./sys/*"; "./proc/*" |] "/" fn + | _ as fmt -> error "unhandled format: %s" fmt + ) formats_archive; + + message (f_"Umounting the disks"); + + (* Now that we've finished the build, don't delete the output file on + * exit. + *) + delete_output_file := false; + + g#sync (); + checked_umount_all (); + g#shutdown (); + g#close (); + + flush_all (); + + (* Don't produce images as output when doing a ramdisk build, + * or ironic-agent is one of the elements (d-i-b does this too). + *) + if not is_ramdisk_build then ( + List.iter ( + fun fmt -> + let fn = output_filename image_name fmt in + message (f_"Converting to %s") fmt; + match fmt with + | "qcow2" -> + let cmd = + sprintf "qemu-img convert%s -f %s %s -O %s%s %s" + (if compressed then " -c" else "") + tmpdiskfmt + (quote tmpdisk) + fmt + (match qemu_img_options with + | None -> "" + | Some opt -> " -o " ^ quote opt) + (quote (qemu_input_filename fn)) in + if debug >= 1 then + printf "%s\n%!" cmd; + run_command cmd + | "vhd" -> + let fn_intermediate = Filename.temp_file ~temp_dir:tmpdir "vhd-intermediate." "" in + let cmd = + sprintf "vhd-util convert -s 0 -t 1 -i %s -o %s" + (quote tmpdisk) + (quote fn_intermediate) in + if debug >= 1 then + printf "%s\n%!" cmd; + run_command cmd; + let cmd = + sprintf "vhd-util convert -s 1 -t 2 -i %s -o %s" + (quote fn_intermediate) + (quote fn) in + if debug >= 1 then + printf "%s\n%!" cmd; + run_command cmd; + if not (Sys.file_exists fn) then + error (f_"VHD output not produced, most probably vhd-util is old or not patched for 'convert'") + | _ as fmt -> error "unhandled format: %s" fmt + ) formats_img_nonraw; + ); + + message (f_"Done") + +let () = run_main_and_handle_errors main diff --git a/dib/elements.ml b/dib/elements.ml new file mode 100644 index 0000000..db7c302 --- /dev/null +++ b/dib/elements.ml @@ -0,0 +1,191 @@ +(* virt-dib + * Copyright (C) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +(* Parsing and handling of elements. *) + +open Common_gettext.Gettext +open Common_utils + +open Utils + +open Printf + +module StringSet = Set.Make (String) + +type element = { + directory : string; + hooks : hooks_map; +} +and hooks_map = (string, string list) Hashtbl.t (* hook name, scripts *) + +exception Duplicate_script of string * string (* hook, script *) + +(* These are the elements which we don't ever try to use. *) +let builtin_elements_blacklist = [ +] + +(* These are the scripts which we don't ever try to run. + * Usual reason could be that they are not compatible the way virt-dib works: + * e.g. they expect the tree of elements outside the chroot, which is not + * available in the appliance. *) +let builtin_scripts_blacklist = [ + "01-sahara-version"; (* Gets the Git commit ID of the d-i-b and + * sahara-image-elements repositories. *) +] + +let valid_script_name n = + let is_char_valid = function + | 'A'..'Z' | 'a'..'z' | '0'..'9' | '_' | '-' -> true + | _ -> false in + try ignore (string_index_fn (fun c -> not (is_char_valid c)) n); false + with Not_found -> true + +let stringset_of_list l = + List.fold_left (fun acc x -> StringSet.add x acc) StringSet.empty l + +let load_hooks ~debug path = + let hooks = Hashtbl.create 13 in + let entries = Array.to_list (Sys.readdir path) in + let entries = List.filter (fun x -> Filename.check_suffix x ".d") entries in + let entries = List.map (fun x -> (x, path // x)) entries in + let entries = List.filter (fun (_, x) -> is_directory x) entries in + List.iter ( + fun (hook, p) -> + let listing = Array.to_list (Sys.readdir p) in + let scripts = List.filter valid_script_name listing in + let scripts = List.filter ( + fun x -> + try + let s = Unix.stat (p // x) in + s.Unix.st_kind = Unix.S_REG && s.Unix.st_perm land 0o111 > 0 + with Unix.Unix_error _ -> false + ) scripts in + if scripts <> [] then + Hashtbl.add hooks hook scripts + ) entries; + hooks + +let load_elements ~debug paths = + let loaded_elements = Hashtbl.create 13 in + let paths = List.filter is_directory paths in + List.iter ( + fun path -> + let listing = Array.to_list (Sys.readdir path) in + let listing = List.map (fun x -> (x, path // x)) listing in + let listing = List.filter (fun (_, x) -> is_directory x) listing in + List.iter ( + fun (p, dir) -> + if not (Hashtbl.mem loaded_elements p) then ( + let elem = { directory = dir; hooks = load_hooks ~debug dir } in + Hashtbl.add loaded_elements p elem + ) else if debug >= 1 then ( + printf "element %s (in %s) already present" p path; + ) + ) listing + ) paths; + loaded_elements + +let load_dependencies elements loaded_elements = + let get filename element = + try + let path = (Hashtbl.find loaded_elements element).directory in + let path = path // filename in + if Sys.file_exists path then ( + let lines = read_whole_file path in + let lines = string_nsplit "\n" lines in + let lines = List.filter ((<>) "") lines in + stringset_of_list lines + ) else + StringSet.empty + with Not_found -> + error (f_"element %s not found") element in + let get_deps = get "element-deps" in + let get_provides = get "element-provides" in + + let queue = Queue.create () in + let final = ref StringSet.empty in + let provided = ref StringSet.empty in + List.iter (fun x -> Queue.push x queue) elements; + final := stringset_of_list elements; + while not (Queue.is_empty queue) do + let elem = Queue.pop queue in + if StringSet.mem elem !provided <> true then ( + let deps = get_deps elem in + provided := StringSet.union !provided (get_provides elem); + StringSet.iter (fun x -> Queue.push x queue) + (StringSet.diff deps (StringSet.union !final !provided)); + final := StringSet.union !final deps + ) + done; + let conflicts = StringSet.inter (stringset_of_list elements) !provided in + if not (StringSet.is_empty conflicts) then + error (f_"following elements were explicitly required but are provided by other included elements: %s") + (String.concat "," (StringSet.elements conflicts)); + if not (StringSet.mem "operating-system" !provided) then + error (f_"please include an operating system element"); + StringSet.diff !final !provided + +let elements_with_script elements loaded_elements hook scriptname = + StringSet.filter ( + fun e -> + try + let s = Hashtbl.find (Hashtbl.find loaded_elements e).hooks hook in + List.exists ((=) scriptname) s + with Not_found -> false + ) elements + +let copy_element element destdir blacklist = + let entries = Array.to_list (Sys.readdir element.directory) in + let entries = List.filter ((<>) "tests") entries in + let entries = List.filter ((<>) "test-elements") entries in + let dirs, nondirs = List.partition is_directory entries in + let dirs = List.map (fun x -> (x, element.directory // x, destdir // x)) dirs in + let nondirs = List.map (fun x -> element.directory // x) nondirs in + let is_regular_file file = + try (Unix.stat file).Unix.st_kind = Unix.S_REG + with Unix.Unix_error _ -> false in + List.iter ( + fun (e, path, destpath) -> + do_mkdir destpath; + let subentries = Array.to_list (Sys.readdir path) in + let subentries = List.filter (not_in_list blacklist) subentries in + List.iter ( + fun sube -> + if is_regular_file (destpath // sube) then ( + raise (Duplicate_script (e, sube)) + ) else + do_cp (path // sube) destpath + ) subentries; + ) dirs; + List.iter ( + fun path -> + do_cp path destdir + ) nondirs + +let copy_elements elements loaded_elements blacklist destdir = + do_mkdir destdir; + StringSet.iter ( + fun element -> + try + copy_element (Hashtbl.find loaded_elements element) destdir blacklist + with + | Duplicate_script (hook, script) -> + let dups = elements_with_script elements loaded_elements hook script in + error (f_"There is a duplicated script in your elements:\n%s/%s in: %s") + hook script (String.concat " " (StringSet.elements dups)) + ) elements diff --git a/dib/utils.ml b/dib/utils.ml new file mode 100644 index 0000000..def2eee --- /dev/null +++ b/dib/utils.ml @@ -0,0 +1,137 @@ +(* virt-dib + * Copyright (C) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + *) + +open Common_gettext.Gettext +open Common_utils + +open Printf + +exception Tool_not_found of string (* tool *) + +let quote = Filename.quote + +let unit_GB howmany = + (Int64.of_int howmany) *^ 1024_L *^ 1024_L *^ 1024_L + +let current_arch () = + (* Turn a CPU into the dpkg architecture naming. *) + let normalize_arch = function + | "amd64" | "x86_64" -> "amd64" + | "i386"| "i486" | "i586" | "i686" -> "i386" + | arch when string_prefix arch "armv" -> "armhf" + | arch -> arch in + normalize_arch Config.host_cpu + +let output_filename image_name = function + | fmt -> image_name ^ "." ^ fmt + +let log_filename () = + let tm = Unix.gmtime (Unix.time ()) in + sprintf "%s-%d%02d%02d-%02d%02d%02d.log" + prog (tm.Unix.tm_year + 1900) (tm.Unix.tm_mon + 1) tm.Unix.tm_mday + tm.Unix.tm_hour tm.Unix.tm_min tm.Unix.tm_sec + +let var_from_lines var lines = + let var_with_equal = var ^ "=" in + let var_lines = List.filter (fun x -> string_prefix x var_with_equal) lines in + (match var_lines with + | [] -> + error (f_"variable '%s' not found in lines:\n%s") + var (String.concat "\n" lines) + | [x] -> snd (string_split "=" x) + | _ -> + error (f_"variable '%s' has more than one occurrency in lines:\n%s") + var (String.concat "\n" lines) + ) + +let string_index_fn fn str = + let len = String.length str in + let rec loop i = + if i = len then raise Not_found + else if fn str.[i] then i + else loop (i + 1) in + loop 0 + +let digit_prefix_compare a b = + let myint str = + try int_of_string str + with _ -> 0 in + let mylength str = + match String.length str with + | 0 -> max_int + | x -> x in + let split_prefix str = + let len = String.length str in + let digits = + let isdigit = function + | '0'..'9' -> true + | _ -> false in + try string_index_fn (fun x -> not (isdigit x)) str + with Not_found -> len in + match digits with + | 0 -> "", str + | x when x = len -> str, "" + | _ -> String.sub str 0 digits, String.sub str digits (len - digits) in + + let pref_a, rest_a = split_prefix a in + let pref_b, rest_b = split_prefix b in + match mylength pref_a, mylength pref_b, compare (myint pref_a) (myint pref_b) with + | x, y, 0 when x = y -> compare rest_a rest_b + | x, y, 0 -> x - y + | _, _, x -> x + +let do_mkdir dir = + mkdir_p dir 0o755 + +let rec remove_dups = function + | [] -> [] + | x :: xs -> x :: (remove_dups (List.filter ((<>) x) xs)) + +let which tool = + (* XXX ugly but effective *) + let lines = external_command (sprintf "sh -c \"which %s 2>/dev/null || true\"" tool) in + let lines = List.filter ((<>) "") lines in + (match lines with + | [] -> raise (Tool_not_found tool) + | [x] -> x + | x :: _ -> + error (f_"output of `which %s` contains more than one line:\n%s") + tool (String.concat "\n" lines)) + +let run_command cmd = + ignore (external_command cmd) + +let check_tool tool = + try ignore (which tool); true + with Tool_not_found _ -> false + +let require_tool tool = + try ignore (which tool) + with Tool_not_found tool -> + error (f_"%s needed but not found") tool + +let do_cp src dest = + let cmd = sprintf "cp -t %s -a %s" (Filename.quote dest) (Filename.quote src) in + run_command cmd + +let ensure_trailing_newline str = + if String.length str > 0 && str.[String.length str - 1] <> '\n' then str ^ "\n" + else str + +let not_in_list l e = + not (List.mem e l) diff --git a/dib/virt-dib.pod b/dib/virt-dib.pod new file mode 100644 index 0000000..aa5a1ae --- /dev/null +++ b/dib/virt-dib.pod @@ -0,0 +1,591 @@ +=head1 NAME + +virt-dib - Run diskimage-builder elements + +=head1 SYNOPSIS + + virt-dib -B DIB-LIB [options] elements... + +=head1 DESCRIPTION + +Virt-dib is a tool for using the elements of C<diskimage-builder> +to build a new disk image, generate new ramdisks, etc. + +Virt-dib is intended as safe replacement for C<diskimage-builder> +and its C<ramdisk-image-create> mode, see +L</COMPARISON WITH DISKIMAGE-BUILDER> for a quick comparison with +usage of C<diskimage-builder>. + +C<diskimage-builder> is part of the TripleO OpenStack project: +L<https://wiki.openstack.org/wiki/TripleO>. + +=head1 EXAMPLES + +=head2 Build simple images of distributions + + virt-dib \ + -B /path/to/diskimage-builder/lib \ + -p /path/to/diskimage-builder/elements \ + --envvar DIB_RELEASE=jessie \ + --name debian-jessie \ + debian vm + +This builds a Debian Jessie (8.x) disk image, suitable for running +as virtual machine, saved as F<debian-jessie.qcow2>. + +=head2 Build ramdisks + + virt-dib \ + -B /path/to/diskimage-builder/lib \ + -p /path/to/diskimage-builder/elements \ + --ramdisk \ + --name ramdisk \ + ubuntu deploy-ironic + +This builds a ramdisk for the Ironic OpenStack component based +on the Ubuntu distribution. + +=head1 OPTIONS + +=over 4 + +=item B<--help> + +Display help. + +=item B<--arch> ARCHITECURE + +Use the specified architecture for the output image. The default +value is the same as the host running virt-dib. + +Notes: right now it does nothing more than setting the C<ARCH> +environment variable for the elements. + +=item B<-B> PATH + +Set the path to the library directory of C<diskimage-builder>. This is +usually the C<lib> subdirectory. + +This parameter is B<mandatory>, as virt-dib needs to provide it for the +elements (as some of them might use scripts in it). Virt-dib itself +does not make use of the library directory. + +=item B<--debug> LEVEL + +Set the debug level to C<LEVEL>, which is a non-negative integer +number. The default is C<0>. + +This debug level is different than what C<-x> and C<-v> set, +and it increases the debugging information printed out. +Specifically, this sets the C<DIB_DEBUG_TRACE>, and any value +E<gt> C<0> enables tracing in the scripts executed. + +=item B<--drive> DISK + +Add the specified disk to be used as helper drive where to cache +files of the elements, like disk images, distribution packages, etc. + +See L</HELPER DRIVE>. + +=item B<-p> PATH + +=item B<--element-path> PATH + +Add a new path with elements. Paths are used in the same order as the +C<-p> parameters appear, so a path specified first is looked first, +and so on. + +Obviously, it is recommended to add the path to the own elements of +C<diskimage-builder>, as most of the other elements will rely on them. + +=item B<--extra-packages> PACKAGE,... + +Install additional packages in the image being built. + +This relies on the C<install-packages> binary provided by the +package management elements. + +This option can be specified multiple times, each time with multiple +packages separated by comma. + +=item B<--envvar> VARIABLE + +=item B<--envvar> VARIABLE=VALUE + +Carry or set an environment variable for the elements. + +See L</ENVIRONMENT VARIABLES> below for more information on the +interaction and usage of environment variables. + +This option can be used in two ways: + +=over 4 + +=item B<--envvar> VARIABLE + +Carry the environment variable C<VARIABLE>. If it is not set, nothing +is exported to the elements. + +=item B<--envvar> VARIABLE=VALUE + +Set the environment variable C<VARIABLE> with value C<VALUE> for the +elements, regardless whether an environment variable with the same +name exists. + +This can be useful to pass environment variable without exporting +them in the environment where virt-dib runs. + +=back + +=item B<--exclude-element> ELEMENT + +Ignore the specified element. + +=item B<--exclude-script> SCRIPT + +Ignore any element script named C<SCRIPT>, whichever element it is in. + +This can be useful in case some script does not run well with virt-dib, +for example when they really need C<diskimage-builder>'s environment. + +=item B<--formats> FORMAT,... + +Set the list of output formats, separating them with comma. + +Supported formats are: + +=over 4 + +=item C<qcow2> (enabled by default) + +QEMU's qcow2. + +=item C<raw> + +Raw disk format. + +=item C<tar> + +An uncompressed tarball. + +=item C<vhd> + +C<Virtual Hard Disk> disk image. This output format requires +the C<vhd-util> tool. + +Please note that the version of C<vhd-util> tool needs to be patched +to support the C<convert> subcommand, and to be bootable. +The patch is available here: +L<https://github.com/emonty/vhd-util/blob/master/debian/patches/citrix>. + +=back + +=item B<--fs-type> FILESYSTEM + +Set the filesystem type to use for the root filesystem. The default +is C<ext4>. + +See also L<guestfs(3)/guestfs_filesystem_available>. + +=item B<--machine-readable> + +This option is used to make the output more machine friendly +when being parsed by other programs. See +L</MACHINE READABLE OUTPUT> below. + +=item B<-m> MB + +=item B<--memsize> MB + +Change the amount of memory allocated to the appliance. Increase +this if you find that the virt-dib execution runs out of memory. + +The default can be found with this command: + + guestfish get-memsize + +=item B<--network> + +=item B<--no-network> + +Enable or disable network access from the guest during the installation. + +Enabled is the default. Use I<--no-network> to disable access. + +The network only allows outgoing connections and has other minor +limitations. See L<virt-rescue(1)/NETWORK>. + +This does not affect whether the guest can access the network once it +has been booted, because that is controlled by your hypervisor or +cloud environment and has nothing to do with virt-dib. + +If you use I<--no-network>, then the environment variable +C<DIB_OFFLINE> is set to C<1>, signaling the elements that they +should use only cached resources when available. Note also that, +unlike with C<diskimage-builder> where elements may still be able +to access to the network even with C<DIB_OFFLINE=>, under virt-dib +network will be fully unaccessible. + +=item B<--image-cache> DIRECTORY + +Set the path in the host where cache the resources used by the elements +of the C<extra-data.d> phase. The default is F<~/.cache/image-create>. + +Please note that most of the resources fetched after C<extra-data> +will be cached in the helper drive specified with I<--drive>; +see also L</HELPER DRIVE>. + +=item B<--install-type> TYPE + +Specify the default installation type. Defaults to C<source>. + +Set to C<package> to use package based installations by default. + +=item B<--mkfs-options> C<OPTION STRING> + +Add the specified options to L<mkfs(1)>, to be able to fine-tune +the root filesystem creation. Note that this is not possible +to override the filesystem type. + +You should use I<--mkfs-options> at most once. To pass multiple +options, separate them with space, eg: + + virt-dib ... --mkfs-options '-O someopt -I foo' + +=item B<-n> + +Skip the inclusion of the C<base> element. + +=item B<--name> NAME + +Set the name of the output image file. The default is C<image>. + +According to the chosen name, there will be the following in the +current directory: + +=over 4 + +=item F<$NAME.ext> + +For each output format, a disk image named after the outout image +with the extension depending on the format; for example: +F<$NAME.qcow2>, F<$NAME.raw>, F<$NAME.tar>. + +Not applicable in ramdisk mode, see L</RAMDISK BUILDING>. + +=item F<$NAME.d> + +A directory containing any files created by the elements, for example +F<dib-manifests> directory (created by the C<manifests> element), +ramdisks and kernels in ramdisk mode, and so on. + +=back + +=item B<--no-delete-on-failure> + +Don't delete the output files on failure to build. You can use this to +debug failures to run scripts. + +The default is to delete the output file if virt-dib fails (or, +for example, some script that it runs fails). + +=item B<--qemu-img-options> option[,option,...] + +Pass I<--qemu-img-options> option(s) to the L<qemu-img(1)> command +to fine-tune the output format. Options available depend on +the output format (see I<--formats>) and the installed version +of the qemu-img program. + +You should use I<--qemu-img-options> at most once. To pass multiple +options, separate them with commas, eg: + + virt-dib ... --qemu-img-options cluster_size=512,preallocation=metadata ... + +=item B<--ramdisk> + +Set the ramdisk building mode. + +See L</RAMDISK BUILDING>. + +=item B<--ramdisk-element> NAME + +Set the name for the additional element added in ramdisk building mode. +The default is C<ramdisk>. + +See L</RAMDISK BUILDING>. + +=item B<--root-label> LABEL + +Set the label for the root filesystem in the created image. + +Please note that some filesystems have different restrictions on +the length of their labels; for example, on C<ext2/3/4> filesystems +labels cannot be longer than 16 characters, while on C<xfs> they have +at most 12 characters. + +The default depends on the actual filesystem for the root partition +(see I<--fs-type>): on C<xfs> is C<img-rootfs>, while +C<cloudimg-rootfs> on any other filesystem. + +=item B<--size> SIZE + +Select the size of the output disk, where the size can be specified +using common names such as C<32G> (32 gigabytes) etc. +The default size is C<5G>. + +To specify size in bytes, the number must be followed by the lowercase +letter I<b>, eg: S<C<--size 10737418240b>>. + +See also L<virt-resize(1)> for resizing partitions of an existing +disk image. + +=item B<--smp> N + +Enable N E<ge> 2 virtual CPUs for scripts to use. + +=item B<-u> + +Do not compress resulting qcow2 images. The default is +to compressed them. + +=item B<-v> + +=item B<--verbose> + +Enable debugging messages. + +=item B<-V> + +=item B<--version> + +Display version number and exit. + +=item B<-x> + +Enable tracing of libguestfs API calls. + +=back + +=head1 ENVIRONMENT VARIABLES + +Unlike with C<diskimage-builder>, the environment of the host is +B<not> inherited in the appliance when running most of the elements +(i.e. all the ones different than C<extra-data.d>). + +To set environment for the elements being run, it is necessary to tell +virt-dib to use them, with the option I<--envvar>. Such option +allows to selectively export environment variables when running the +elements, and it is the preferred way to pass environment variables +to the elements. + +To recap: if you want the environment variable C<MYVAR> +(and its content) to be available to the elements, you can do either + + export MYVAR # whichever is its value + virt-dib ... --envvar MYVAR ... + +or + + virt-dib ... --envvar MYVAR=value_of_it ... + +=head1 HELPER DRIVE + +Virt-dib runs most of the element in its own appliance, and thus not +on the host. Because of this, there is no possibility for elements +to cache resources directly on the host. + +To solve this issue, virt-dib allows the usage of an helper drive +where to store cached resources, like disk images, +distribution packages, etc. While this means that there is a smaller +space available for caching, at least it allows to limit the space +on the host for caches, without assuming that elements will do that +by themselves. + +Currently this disk is either required to have a single partition +on it, or the first partition on it will be used. A disk with +the latter configuration can be easily created with L<guestfish(1)> +like the following: + + guestfish -N filename.img=fs:ext4:10G + +The above will create a disk image called F<filename.img>, 10G big, +with a single partition of type ext4; +see L<guestfish(1)/PREPARED DISK IMAGES>. + +It is recommended for it to be E<ge> 5G or even more, as elements +will cache disk images, distribution packages, etc. + +The disk is also used as C<$HOME> during the elements run. +Virt-dib stores in it the logs of the scripts executed in the appliance. + +The drive can be accessed like any other disk image, for example using +other tools of libguestfs such as L<guestfish(1)>: + + guestfish -a filename.img -m /dev/sda1 + +If no helper drive is specified with I<--drive>, all the resources +cached during a virt-dib run will be discarded. + +=head1 RAMDISK BUILDING + +Virt-dib can emulate also C<ramdisk-image-create>, which is a secondary +operation mode of C<diskimage-builder>. Instead of being a different +tool name, virt-dib provides easy access to this mode using the +I<--ramdisk> switch. + +In this mode: + +=over 4 + +=item + +there is an additional ramdisk element added (see I<--ramdisk-element>) + +=item + +no image is produced (so I<--formats> is ignored) + +=item + +F<$NAME.d> (see I<--name>) will contain initrd, kernel, etc + +=back + +=head1 TEMPORARY DIRECTORY + +Virt-dib uses the standard temporary directory used by libguestfs, +see L<guestfs(3)/ENVIRONMENT VARIABLES>. + +By default this location is F</tmp> (default value for C<$TMPDIR>), +which on some systems may be on a tmpfs filesystem, and thus +defaulting to a maximum size of I<half> of physical RAM. +If virt-dib exceeds this, it may hang or exit early with an error. +The solution is to point C<$TMPDIR> to a permanent location used +as temporary location, for example: + + $ mkdir local-tmp + $ env TMPDIR=$PWD/local-tmp virt-dib ... + $ rm -rf local-tmp + +=head1 MACHINE READABLE OUTPUT + +The I<--machine-readable> option can be used to make the output more +machine friendly, which is useful when calling virt-dib from other +programs, GUIs etc. + +Use the option on its own to query the capabilities of the +virt-dib binary. Typical output looks like this: + + $ virt-dib --machine-readable + virt-dib + output:qcow2 + output:tar + output:raw + output:vhd + +A list of features is printed, one per line, and the program exits +with status 0. + +=head1 COMPARISON WITH DISKIMAGE-BUILDER + +Virt-dib is intended as safe replacement for C<diskimage-builder> +and its C<ramdisk-image-create> mode; the user-notable differences +consist in: + +=over 4 + +=item + +the command line arguments; some of the arguments are the same as +available in C<diskimage-builder>, while some have different names + +=item + +the location of non-image output files (like ramdisks and kernels) + +=item + +the way cached resources are saved: using an helper drive, not directly +on the disk where virt-dib is run + +=item + +the need to specify a target size for the output disk, as opposed +to C<diskimage-builder> calculating an optimal one + +=item + +the handling of environment variables, see L</ENVIRONMENT VARIABLES>. + +Furthermore, other than the libguestfs own environment variables +(see L<guestfs(3)/ENVIRONMENT VARIABLES>), virt-dib does not read +any other environment variable: this means that all the options +and behaviour changes are specified solely using command line +arguments + +=item + +C<extra-data.d> scripts run before in the host environment, before +all the other ones (even C<root.d>); this means that, depending +on the configuration for the elements, some of them may fail due to +missing content (usually directories) in C<$TMP_HOOKS_PATH>. + +Workarounds for this may be either: + +=over 4 + +=item + +fix the C<extra-data.d> scripts to create the missing directories + +=item + +create (and use) a simple element with a C<extra-data.d> script +named e.g. F<00-create-missing-dirs> to create the missing +directories + +=back + +=back + +Elements themselves should notice no difference in they way +they are run; behaviour differences may due to wrong assumptions in +elements, or not correct virt-dib emulation. + +Known issues at the moment: + +=over 4 + +=item + +(none) + +=back + +=head1 TESTING + +Virt-dib has been tested with C<diskimage-builder> (and its elements) +E<ge> 0.1.43; from time to time also with C<tripleo-image-elements> +and C<sahara-image-elements>. + +Previous versions may work, but it is not guaranteed. + +=head1 EXIT STATUS + +This program returns 0 if successful, or non-zero if there was an +error. + +=head1 SEE ALSO + +L<guestfs(3)>, +L<guestfish(1)>, +L<virt-resize(1)>, +L<http://libguestfs.org/>. + +=head1 AUTHOR + +Pino Toscano (C<ptoscano at redhat dot com>) + +=head1 COPYRIGHT + +Copyright (C) 2015 Red Hat Inc. diff --git a/po-docs/podfiles b/po-docs/podfiles index c76f1b1..26bd880 100644 --- a/po-docs/podfiles +++ b/po-docs/podfiles @@ -11,6 +11,7 @@ ../customize/virt-customize.pod ../daemon/guestfsd.pod ../df/virt-df.pod +../dib/virt-dib.pod ../diff/virt-diff.pod ../edit/virt-edit.pod ../erlang/examples/guestfs-erlang.pod diff --git a/run.in b/run.in index 8fdf454..5d30bf4 100755 --- a/run.in +++ b/run.in @@ -102,6 +102,7 @@ prepend PATH "$b/sysprep" prepend PATH "$b/test-tool" prepend PATH "$b/tools" prepend PATH "$b/v2v" +prepend PATH "$b/dib" export PATH # Set LD_LIBRARY_PATH and DYLD_LIBRARY_PATH to contain library. -- 2.1.0