4:15 p.m.
From: "Richard W.M. Jones" <rjones(a)redhat.com>
QEMU 1.0 was released at the end of 2011.
Remove all the cruft about detecting broken -machine type which
was only required for QEMU 0.15.
This also reverts commit 30ecbf3ec2ada68f7e125a180553e31b069033b7.
Even on ARM you can pass -machine accel=kvm:tcg and qemu does the
right thing, so I'm not sure why we wanted to disable that.
---
README | 2 +-
configure.ac | 68 ++++++++++++++++++----------------------------------------
src/launch.c | 27 +++++------------------
3 files changed, 27 insertions(+), 70 deletions(-)
diff --git a/README b/README
index 2b133c6..4dd2075 100644
--- a/README
+++ b/README
@@ -46,7 +46,7 @@ For basic functionality and the C tools:
- look at appliance/packagelist.in and install as many of the packages
that apply to your distro as possible
-- recent QEMU >= 0.13 (0.14 or later is better) with virtio-serial support
+- QEMU >= 1.0.
- kernel >= 2.6.34 with virtio-serial support enabled.
diff --git a/configure.ac b/configure.ac
index 69da9a5..ca0f9f1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -568,55 +568,29 @@ working.
])
fi
- AS_IF([test "x$QEMU_OPTIONS" = "x"],[
- dnl qemu 0.15 was released with broken support for '-machine',
- dnl requiring you to add the machine type: '-machine pc,[...]'.
- dnl The problem is that 'pc' is only applicable for PC-like
- dnl hardware, so we cannot do this as a general solution. Since
- dnl qemu 0.15, this problem has been fixed so now the default
- dnl machine type is chosen (qemu commit 2645c6dcaf6ea2a51a).
- dnl
- dnl We need to work out if this qemu is the broken version, so we
- dnl can add 'pc' just for this broken version.
- dnl
- dnl Note that old qemu didn't support the '-machine' option at all.
- dnl
- dnl We use the -kernel option for testing this, because this option
- dnl is processed very late, after qemu has set up the machine.
- AC_MSG_CHECKING([for broken '-machine accel=tcg' option in $QEMU])
- LC_ALL=C $QEMU -nographic -machine accel=tcg -kernel /NO_SUCH_FILE \
- > config1.tmp 2>&1
- LC_ALL=C $QEMU -nographic -machine pc,accel=tcg -kernel /NO_SUCH_FILE \
- > config2.tmp 2>&1
- if cmp -s config1.tmp config2.tmp; then
- AC_MSG_RESULT([no])
- else
- AC_MSG_RESULT([yes])
- AC_DEFINE([QEMU_MACHINE_TYPE_IS_BROKEN],[1],[qemu -machine accel=tcg option
is broken (in qemu 0.15 only)])
- fi
- rm config1.tmp config2.tmp
-
- dnl See if the '-machine [pc,]accel=tcg' option is required in
- dnl order to run the virtio-serial test below. This happens when
- dnl we run qemu-kvm inside a VM without forcing TCG:
- dnl
- dnl Could not access KVM kernel module: No such file or directory
- dnl failed to initialize KVM: No such file or directory
- dnl No accelerator found!
- AC_MSG_CHECKING([if -machine @<:@pc,@:>@accel=tcg option is required to
test virtio-serial feature])
- if $QEMU -nographic -device \? >/dev/null 2>&1; then
- :
- elif $QEMU -machine accel=tcg -nographic -device \? >/dev/null 2>&1;
then
- QEMU_OPTIONS_FOR_TEST="-machine accel=tcg"
- elif $QEMU -machine pc,accel=tcg -nographic -device \? >/dev/null 2>&1;
then
- QEMU_OPTIONS_FOR_TEST="-machine pc,accel=tcg"
- # else nothing ... it'll fail below.
- fi
- AC_MSG_RESULT([$QEMU_OPTIONS_FOR_TEST])
- ])
+ AC_MSG_CHECKING([that $QEMU -version works])
+ if $QEMU -version >&AS_MESSAGE_LOG_FD 2>&1; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ AC_MSG_FAILURE(
+[$QEMU -version: command failed.
+
+This could be a very old version of qemu, or qemu might not be
+working.
+])
+ fi
+
+ AC_MSG_CHECKING([for $QEMU version >= 1])
+ if $QEMU -version | grep -sq 'version @<:@1-@:>@'; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ AC_MSG_FAILURE([$QEMU version must be >= 1.0.])
+ fi
AC_MSG_CHECKING([for virtio-serial support in $QEMU])
- if $QEMU $QEMU_OPTIONS $QEMU_OPTIONS_FOR_TEST -nographic -device \? 2>&1 |
grep -sq virtio-serial; then
+ if $QEMU $QEMU_OPTIONS -machine accel=kvm:tcg -device \? 2>&1 | grep -sq
virtio-serial; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
diff --git a/src/launch.c b/src/launch.c
index 7bc913b..e175dd9 100644
--- a/src/launch.c
+++ b/src/launch.c
@@ -678,29 +678,13 @@ launch_appliance (guestfs_h *g)
add_cmdline_shell_unquoted (g, QEMU_OPTIONS);
}
- /* The #if on the next line should really be "architectures for
- * which KVM is commonly available.
- */
-#if defined(__i386__) || defined(__x86_64__)
/* The qemu -machine option (added 2010-12) is a bit more sane
* since it falls back through various different acceleration
* modes, so try that first (thanks Markus Armbruster).
*/
if (qemu_supports (g, "-machine")) {
add_cmdline (g, "-machine");
-#if QEMU_MACHINE_TYPE_IS_BROKEN
- /* Workaround for qemu 0.15: We have to add the '[type=]pc'
- * since there is no default. This is not a permanent solution
- * because this only works on PC-like hardware. Other platforms
- * like ppc would need a different machine type.
- *
- * This bug is fixed in qemu commit 2645c6dcaf6ea2a51a, and was
- * not a problem in qemu < 0.15.
- */
- add_cmdline (g, "pc,accel=kvm:tcg");
-#else
add_cmdline (g, "accel=kvm:tcg");
-#endif
} else {
/* qemu sometimes needs this option to enable hardware
* virtualization, but some versions of 'qemu-kvm' will use KVM
@@ -718,7 +702,6 @@ launch_appliance (guestfs_h *g)
is_openable (g, "/dev/kvm", O_RDWR|O_CLOEXEC))
add_cmdline (g, "-enable-kvm");
}
-#endif /* i386 or x86-64 */
if (g->smp > 1) {
snprintf (buf, sizeof buf, "%d", g->smp);
@@ -1339,11 +1322,11 @@ test_qemu (guestfs_h *g)
snprintf (cmd, sizeof cmd, "LC_ALL=C '%s' -nographic -help",
g->qemu);
- /* qemu -help should always work (qemu -version OTOH wasn't
- * supported by qemu 0.9). If this command doesn't work then it
- * probably indicates that the qemu binary is missing.
+ /* If this command doesn't work then it probably indicates that the
+ * qemu binary is missing.
*/
if (test_qemu_cmd (g, cmd, &g->qemu_help) == -1) {
+ qemu_error:
error (g, _("command failed: %s\n\nIf qemu is located on a non-standard path,
try setting the LIBGUESTFS_QEMU\nenvironment variable. There may also be errors printed
above."),
cmd);
return -1;
@@ -1352,8 +1335,8 @@ test_qemu (guestfs_h *g)
snprintf (cmd, sizeof cmd, "LC_ALL=C '%s' -nographic -version
2>/dev/null",
g->qemu);
- /* Intentionally ignore errors from qemu -version. */
- ignore_value (test_qemu_cmd (g, cmd, &g->qemu_version));
+ if (test_qemu_cmd (g, cmd, &g->qemu_version) == -1)
+ goto qemu_error;
return 0;
}
--
1.7.10.1