[PATCH 0/2] Delay firstboot scripts to some later time
by Tomáš Golembiovský
When firstboot is used from virt-v2v the scripts, if not fast enough, can get
killed by Windows. After windows installs virtio drivers injected by virt-v2v
it performs some internall reboot, stopping all the running services and
killing any running firstboot script. This is problem mostly for MSI installs
(like qemu-ga that was added recently) that can take several seconds to finish.
This change is little bit controversial in fact that it relies on powershell.
This is not available in early versions (without service packs) of XP and 2003
and our support matrix still mentions these Windows versions.
The change can also be problem for those who really wish to perform an action
early in the boot... if there are such users.
Tomáš Golembiovský (2):
firstboot: use absolute path to rhsrvany
firstboot: schedule firstboot as delayed task
mlcustomize/firstboot.ml | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--
2.24.0
4 years, 9 months
[PATCH libnbd 0/2] api: Add support for AF_VSOCK.
by Richard W.M. Jones
This is a series of patches to libnbd and nbdkit adding AF_VSOCK
support.
On the host side it allows you to start an nbdkit instance which
listens on a virtio-vsock socket:
$ ./nbdkit -fv --vsock memory 1G
...
nbdkit: debug: bound to vsock 2:10809
On the guest side you can then use libnbd to connect to the server:
$ ./run nbdsh -c 'h.connect_vsock(2, 10809)' -c 'print(h.get_size())'
1073741824
$ ./run nbdfuse mp --vsock 2 10809 &
$ ll mp/
total 0
-rw-rw-rw-. 1 rjones rjones 1073741824 Oct 18 16:23 nbd
$ dd if=/dev/random of=mp/nbd bs=1024 count=100 conv=notrunc,nocreat
dd: warning: partial read (84 bytes); suggest iflag=fullblock
0+100 records in
0+100 records out
6851 bytes (6.9 kB, 6.7 KiB) copied, 0.013797 s, 497 kB/s
(Performance of FUSE is not great, it should be better using raw
libnbd.)
I mainly wrote this to show that it can be done. It's unclear if this
would be faster or slower than the usual way that NBD devices are
exposed to guests via virtio-blk/-scsi.
https://wiki.qemu.org/Features/VirtioVsock
Thanks: Stefan Hajnoczi for help with debugging this.
4 years, 9 months
[PATCH v2] launch: add support for autodetection of appliance image format
by Pavel Butsykin
This feature allows you to use different image formats for the fixed
appliance. The raw format is used by default.
Signed-off-by: Pavel Butsykin <pbutsykin(a)virtuozzo.com>
---
lib/launch-direct.c | 2 ++
lib/launch-libvirt.c | 19 ++++++++++++-------
m4/guestfs_appliance.m4 | 11 +++++++++++
3 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/lib/launch-direct.c b/lib/launch-direct.c
index 0be662e25..b9b54857a 100644
--- a/lib/launch-direct.c
+++ b/lib/launch-direct.c
@@ -592,7 +592,9 @@ launch_direct (guestfs_h *g, void *datav, const char *arg)
append_list ("id=appliance");
append_list ("cache=unsafe");
append_list ("if=none");
+#ifndef APPLIANCE_FMT_AUTO
append_list ("format=raw");
+#endif
} end_list ();
start_list ("-device") {
append_list ("scsi-hd");
diff --git a/lib/launch-libvirt.c b/lib/launch-libvirt.c
index 4adb2cfb3..030ea6911 100644
--- a/lib/launch-libvirt.c
+++ b/lib/launch-libvirt.c
@@ -212,9 +212,10 @@ get_source_format_or_autodetect (guestfs_h *g, struct drive *drv)
/**
* Create a qcow2 format overlay, with the given C<backing_drive>
- * (file). The C<format> parameter, which must be non-NULL, is the
- * backing file format. This is used to create the appliance overlay,
- * and also for read-only drives.
+ * (file). The C<format> parameter is the backing file format.
+ * The C<format> parameter can be NULL, in this case the backing
+ * format will be determined automatically. This is used to create
+ * the appliance overlay, and also for read-only drives.
*/
static char *
make_qcow2_overlay (guestfs_h *g, const char *backing_drive,
@@ -223,8 +224,6 @@ make_qcow2_overlay (guestfs_h *g, const char *backing_drive,
char *overlay;
struct guestfs_disk_create_argv optargs;
- assert (format != NULL);
-
if (guestfs_int_lazy_make_tmpdir (g) == -1)
return NULL;
@@ -232,8 +231,10 @@ make_qcow2_overlay (guestfs_h *g, const char *backing_drive,
optargs.bitmask = GUESTFS_DISK_CREATE_BACKINGFILE_BITMASK;
optargs.backingfile = backing_drive;
- optargs.bitmask |= GUESTFS_DISK_CREATE_BACKINGFORMAT_BITMASK;
- optargs.backingformat = format;
+ if (format) {
+ optargs.bitmask |= GUESTFS_DISK_CREATE_BACKINGFORMAT_BITMASK;
+ optargs.backingformat = format;
+ }
if (guestfs_disk_create_argv (g, overlay, "qcow2", -1, &optargs) == -1) {
free (overlay);
@@ -461,7 +462,11 @@ launch_libvirt (guestfs_h *g, void *datav, const char *libvirt_uri)
/* Note that appliance can be NULL if using the old-style appliance. */
if (appliance) {
+#ifdef APPLIANCE_FMT_AUTO
+ params.appliance_overlay = make_qcow2_overlay (g, appliance, NULL);
+#else
params.appliance_overlay = make_qcow2_overlay (g, appliance, "raw");
+#endif
if (!params.appliance_overlay)
goto cleanup;
}
diff --git a/m4/guestfs_appliance.m4 b/m4/guestfs_appliance.m4
index 81c43879f..4e1ec8135 100644
--- a/m4/guestfs_appliance.m4
+++ b/m4/guestfs_appliance.m4
@@ -139,3 +139,14 @@ AC_SUBST([GUESTFS_DEFAULT_PATH])
AC_DEFINE_UNQUOTED([GUESTFS_DEFAULT_PATH], ["$GUESTFS_DEFAULT_PATH"],
[Define guestfs default path.])
+
+AC_ARG_ENABLE([appliance-fmt-auto],
+ [AS_HELP_STRING([--enable-appliance-fmt-auto],
+ [enable autodetection of appliance image format @<:@default=no@:>@])],
+ [ENABLE_APPLIANCE_FMT_AUTO="$enableval"],
+ [ENABLE_APPLIANCE_FMT_AUTO=no])
+
+if test "x$ENABLE_APPLIANCE_FMT_AUTO" = "xyes"; then
+ AC_DEFINE([APPLIANCE_FMT_AUTO], [1],
+ [Define to 1 if enabled autodetection of appliance image format.])
+fi
--
2.13.0
4 years, 9 months
[PATCH 0/2] Fixes and tweak to the installation of qemu-ga MSI
by Tomáš Golembiovský
This, together with the changes to common repo are fixes to the installation
qemu-ga MSI.
There is still an issue that I did not figure yet how to fix. On Windows 10 it
fails to register the QEMU-GA service.
Tomáš Golembiovský (2):
windows: fix detection of qemu-ga installer on RHV
windows: small tweaks of qemu-ga firstboot script
v2v/convert_windows.ml | 8 +++++++-
v2v/windows_virtio.ml | 5 ++---
2 files changed, 9 insertions(+), 4 deletions(-)
--
2.24.0
4 years, 9 months
Re: [Libguestfs] virt-df for KVM
by Richard W.M. Jones
On Sat, Nov 30, 2019 at 06:49:29PM +0800, zxs11289 wrote:
> I face a problem on KVM using virt-df。 I have two computer,they
> have installed tools for KVM. The computer（ip 15）has no virtual
> machine and computer（ip 33）has two virtual machines。on the
> computer(ip33)， i run the command “virt-df” if on the computer(ip15)，
> i run the command “virt-df --connect qemu+ssh://10.0.0.33/system”,
> ERROR：No such file or directory。But i have the file。why？
Unfortunately the --connect parameter doesn't let you access a disk on
a remote machine:
http://libguestfs.org/guestfs-faq.1.html#remote-libvirt-guests-cannot-be-...
It's not really possible the way you are doing it now. You will have
to run virt-df on the local machine. Perhaps use a tool like Ansible
(https://www.ansible.com/)?
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
4 years, 11 months
[PATCH] rhv-upload: Fix waiting for transfer
by Nir Soffer
We were not considering failures while initializing the transfer. In
this case the transfer phase can change to PAUSED_SYSTEM or
FINISHED_FAILURE, and transfer_url will be None, which failed the
upload with a misleading error:
RuntimeError: direct upload to host not supported, requires
ovirt-engine >= 4.2 and only works when virt-v2v is run within the
oVirt/RHV environment, eg. on an oVirt node
Change the wait loop to consider all cases:
- Transfer failed and was removed
- Transfer failed and will be removed soon
- Transfer paused by the system (cancel required)
- Unexpected transfer phase (cancel required)
- Timeout waiting for TRANSFERRING state (cancel required)
Reported-by: Xiaodai Wang
---
I could easy simulate the case when the system paused the transfer by
injecting an error in vdsm, failing transfer initialization.
The import fail with:
nbdkit: python[1]: error: /home/nsoffer/src/virt-v2v/tmp/rhvupload.1DgXyh/rhv-upload-plugin.py: open: error: Traceback (most recent call last):
File "/home/nsoffer/src/virt-v2v/tmp/rhvupload.1DgXyh/rhv-upload-plugin.py", line 109, in open
transfer = create_transfer(connection, disk, host)
File "/home/nsoffer/src/virt-v2v/tmp/rhvupload.1DgXyh/rhv-upload-plugin.py", line 539, in create_transfer
"transfer %s was paused by system" % transfer.id)
RuntimeError: transfer 32b97384-ac8b-40d5-b423-26d31faabe32 was paused by system
I could not simulate the other cases. This probaly requires injecting
errors in engine.
v2v/rhv-upload-plugin.py | 40 +++++++++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/v2v/rhv-upload-plugin.py b/v2v/rhv-upload-plugin.py
index 75e4f404..3942ec72 100644
--- a/v2v/rhv-upload-plugin.py
+++ b/v2v/rhv-upload-plugin.py
@@ -513,21 +513,43 @@ def create_transfer(connection, disk, host):
# Get a reference to the created transfer service.
transfer_service = transfers_service.image_transfer_service(transfer.id)
- # After adding a new transfer for the disk, the transfer's status
- # will be INITIALIZING. Wait until the init phase is over. The
- # actual transfer can start when its status is "Transferring".
+ # Wait until transfer's phase change from INITIALIZING to TRANSFERRING. On
+ # errors transfer's phase can change to PAUSED_SYSTEM or FINISHED_FAILURE.
+ # If the transfer was paused, we need to cancel it to remove the disk,
+ # otherwise the system will remove the disk and transfer shortly after.
+
endt = time.time() + timeout
while True:
- transfer = transfer_service.get()
- if transfer.phase != types.ImageTransferPhase.INITIALIZING:
+ time.sleep(1)
+ try:
+ transfer = transfer_service.get()
+ except sdk.NotFoundError:
+ # The system has removed the disk and the transfer.
+ raise RuntimeError("transfer %s was removed" % transfer.id)
+
+ if transfer.phase == types.ImageTransferPhase.FINISHED_FAILURE:
+ # The system will remove the disk and the transfer soon.
+ raise RuntimeError(
+ "transfer %s has failed" % transfer.id)
+
+ if transfer.phase == types.ImageTransferPhase.PAUSED_SYSTEM:
+ transfer_service.cancel()
+ raise RuntimeError(
+ "transfer %s was paused by system" % transfer.id)
+
+ if transfer.phase == types.ImageTransferPhase.TRANSFERRING:
break
- if time.time() > endt:
+
+ if transfer.phase != types.ImageTransferPhase.INITIALIZING:
transfer_service.cancel()
raise RuntimeError(
- "timed out waiting for transfer %s status != INITIALIZING"
- % transfer.id)
+ "unexpected transfer %s phase %s"
+ % (transfer.id, transfer.phase))
- time.sleep(1)
+ if time.time() > endt:
+ transfer_service.cancel()
+ raise RuntimeError(
+ "timed out waiting for transfer %s" % transfer.id)
return transfer
--
2.21.0
4 years, 11 months
virt-df -a xxx.qcow2 failure, after about ten minutes , failed
by thomas
use the virt-df to query vm disk usage like this:
virt-df -a /home/centos7_mini.qcow2
then check:
virsh list --all
Id Name State
1 guestfs-p1km7lhfowv8o0q1running //virt-df will create a vm in temp filesystem
but after a few minutes , still fails to get the vm disk usage , why ??
[root@bogon libguestfs-1.38.2]# uname -ar
Linux bogon 3.10.0 #2 SMP Thu Nov 28 06:06:42 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost ~]# virt-df --version
virt-df 1.40.2rhel=7,release=5.el7_7.1,libvirt
below is the virt-df run debug log
==========================================
libguestfs: trace: set_verbose true
libguestfs: trace: set_verbose = 0
libguestfs: create: flags = 0, handle = 0x55c0c085c6e0, program = virt-df
libguestfs: trace: add_drive "/home/zt/centos7_mini.qcow2" "readonly:true"
libguestfs: creating COW overlay to protect original drive content
libguestfs: trace: disk_format "/home/zt/centos7_mini.qcow2"
libguestfs: command: run: qemu-img --help | grep -sqE -- '\binfo\b.-U\b'
libguestfs: command: run: qemu-img
libguestfs: command: run: \ info
libguestfs: command: run: \ -U
libguestfs: command: run: \ --output json
libguestfs: command: run: \ /home/zt/centos7_mini.qcow2
libguestfs: parse_json: qemu-img info JSON output:\n{\n "virtual-size": 17179869184,\n "filename": "/home/zt/centos7_mini.qcow2",\n "cluster-size": 65536,\n "format": "qcow2",\n "actual-size": 1430130688,\n "format-specific": {\n "type": "qcow2",\n "data": {\n "compat": "1.1",\n "lazy-refcounts": false,\n "refcount-bits": 16,\n "corrupt": false\n }\n },\n "dirty-flag": false\n}\n\n
libguestfs: trace: disk_format = "qcow2"
libguestfs: trace: get_tmpdir
libguestfs: trace: get_tmpdir = "/tmp"
libguestfs: trace: disk_create "/tmp/libguestfso7dtGK/overlay1.qcow2" "qcow2" -1 "backingfile:/home/zt/centos7_mini.qcow2" "backingformat:qcow2"
libguestfs: command: run: qemu-img
libguestfs: command: run: \ create
libguestfs: command: run: \ -f qcow2
libguestfs: command: run: \ -o backing_file=/home/zt/centos7_mini.qcow2,backing_fmt=qcow2
libguestfs: command: run: \ /tmp/libguestfso7dtGK/overlay1.qcow2
Formatting '/tmp/libguestfso7dtGK/overlay1.qcow2', fmt=qcow2 size=17179869184 backing_file=/home/zt/centos7_mini.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
libguestfs: trace: disk_create = 0
libguestfs: trace: get_backend_setting "internal_libvirt_imagelabel"
libguestfs: trace: get_backend_setting = NULL (error)
libguestfs: trace: add_drive = 0
libguestfs: trace: launch
libguestfs: trace: max_disks
libguestfs: trace: max_disks = 255
libguestfs: trace: version
libguestfs: trace: version = <struct guestfs_version = major: 1, minor: 40, release: 2, extra: rhel=7,release=5.el7_7.2,libvirt, >
libguestfs: trace: get_backend
libguestfs: trace: get_backend = "libvirt"
libguestfs: launch: program=virt-dflibguestfs: launch: version=1.40.2rhel=7,release=5.el7_7.2,libvirt
libguestfs: launch: backend registered: unix
libguestfs: launch: backend registered: uml
libguestfs: launch: backend registered: libvirt
libguestfs: launch: backend registered: direct
libguestfs: launch: backend=libvirt
libguestfs: launch: tmpdir=/tmp/libguestfso7dtGK
libguestfs: launch: umask=0022
libguestfs: launch: euid=0
libguestfs: libvirt version = 4005000 (4.5.0)
libguestfs: guest random name = guestfs-p1km7lhfowv8o0q1
libguestfs: connect to libvirt
libguestfs: opening libvirt handle: URI = qemu:///system, auth = default+wrapper, flags = 0
libguestfs: successfully opened libvirt handle: conn = 0x55c0c085de00
libguestfs: qemu version (reported by libvirt) = 3000000 (3.0.0)
libguestfs: get libvirt capabilities
libguestfs: parsing capabilities XML
libguestfs: trace: get_backend_setting "force_tcg"
libguestfs: trace: get_backend_setting = NULL (error)
libguestfs: trace: get_backend_setting "internal_libvirt_label"
libguestfs: trace: get_backend_setting = NULL (error)
libguestfs: trace: get_backend_setting "internal_libvirt_imagelabel"
libguestfs: trace: get_backend_setting = NULL (error)
libguestfs: trace: get_backend_setting "internal_libvirt_norelabel_disks"
libguestfs: trace: get_backend_setting = NULL (error)
libguestfs: build appliance
libguestfs: trace: get_cachedir
libguestfs: trace: get_cachedir = "/var/tmp"
libguestfs: begin building supermin appliance
libguestfs: run supermin
libguestfs: command: run: /usr/bin/supermin5
libguestfs: command: run: \ --build
libguestfs: command: run: \ --verbose
libguestfs: command: run: \ --if-newer
libguestfs: command: run: \ --lock /var/tmp/.guestfs-0/lock
libguestfs: command: run: \ --copy-kernel
libguestfs: command: run: \ -f ext2
libguestfs: command: run: \ --host-cpu x86_64
libguestfs: command: run: \ /usr/lib64/guestfs/supermin.d
libguestfs: command: run: \ -o /var/tmp/.guestfs-0/appliance.d
supermin: version: 5.1.19
supermin: rpm: detected RPM version 4.11
supermin: package handler: fedora/rpm
supermin: acquiring lock on /var/tmp/.guestfs-0/lock
supermin: build: /usr/lib64/guestfs/supermin.d
supermin: reading the supermin appliance
supermin: build: visiting /usr/lib64/guestfs/supermin.d/base.tar.gz type gzip base image (tar)
supermin: build: visiting /usr/lib64/guestfs/supermin.d/daemon.tar.gz type gzip base image (tar)
supermin: build: visiting /usr/lib64/guestfs/supermin.d/excludefiles type uncompressed excludefiles
supermin: build: visiting /usr/lib64/guestfs/supermin.d/hostfiles type uncompressed hostfiles
supermin: build: visiting /usr/lib64/guestfs/supermin.d/init.tar.gz type gzip base image (tar)
supermin: build: visiting /usr/lib64/guestfs/supermin.d/packages type uncompressed packages
supermin: build: visiting /usr/lib64/guestfs/supermin.d/udev-rules.tar.gz type gzip base image (tar)
supermin: mapping package names to installed packages
supermin: resolving full list of package dependencies
supermin: build: 198 packages, including dependencies
supermin: build: 31773 files
supermin: build: 7626 files, after matching excludefiles
supermin: build: 7635 files, after adding hostfiles
supermin: build: 7607 files, after removing unreadable files
supermin: build: 7641 files, after munging
supermin: kernel: looking for kernel using environment variables ...
supermin: kernel: looking for kernels in /lib/modules//vmlinuz ...
supermin: kernel: looking for kernels in /boot ...
supermin: kernel: kernel version of /boot/vmlinuz-3.10.0.old = 3.10.0 (from content)
supermin: kernel: picked modules path /lib/modules/3.10.0
supermin: kernel: kernel version of /boot/vmlinuz-3.10.0-957.5.1.el7.x86_64 = 3.10.0-957.5.1.el7.x86_64 (from content)
supermin: kernel: picked modules path /lib/modules/3.10.0-957.5.1.el7.x86_64
supermin: kernel: kernel version of /boot/vmlinuz-3.10.0-862.14.4.el7.x86_64 = 3.10.0-862.14.4.el7.x86_64 (from content)
supermin: kernel: picked modules path /lib/modules/3.10.0-862.14.4.el7.x86_64
supermin: kernel: kernel version of /boot/vmlinuz-3.10.0-862.11.6.el7.x86_64 = 3.10.0-862.11.6.el7.x86_64 (from content)
supermin: kernel: picked modules path /lib/modules/3.10.0-862.11.6.el7.x86_64
supermin: kernel: kernel version of /boot/vmlinuz-3.10.0-693.el7.x86_64 = 3.10.0-693.el7.x86_64 (from content)
supermin: kernel: picked modules path /lib/modules/3.10.0-693.el7.x86_64
supermin: kernel: kernel version of /boot/vmlinuz-3.10.0 = 3.10.0 (from content)
supermin: kernel: picked modules path /lib/modules/3.10.0
supermin: kernel: kernel version of /boot/vmlinuz-0-rescue-cadf9c26ef974279b4fff2fd4c3f4767 = 3.10.0-693.el7.x86_64 (from content)
supermin: kernel: picked modules path /lib/modules/3.10.0-693.el7.x86_64
supermin: kernel: picked vmlinuz /boot/vmlinuz-3.10.0.old
supermin: kernel: kernel_version 3.10.0
supermin: kernel: modpath /lib/modules/3.10.0
supermin: ext2: creating empty ext2 filesystem '/var/tmp/.guestfs-0/appliance.d.mno21beq/root'
supermin: ext2: populating from base image
supermin: ext2: copying files from host filesystem
supermin: ext2: copying kernel modules
supermin: ext2: creating minimal initrd '/var/tmp/.guestfs-0/appliance.d.mno21beq/initrd'
supermin: ext2: wrote 1 modules to minimal initrd
supermin: renaming /var/tmp/.guestfs-0/appliance.d.mno21beq to /var/tmp/.guestfs-0/appliance.d
libguestfs: finished building supermin appliance
libguestfs: trace: disk_create "/tmp/libguestfso7dtGK/overlay2.qcow2" "qcow2" -1 "backingfile:/var/tmp/.guestfs-0/appliance.d/root" "backingformat:raw"
libguestfs: command: run: qemu-img
libguestfs: command: run: \ create
libguestfs: command: run: \ -f qcow2
libguestfs: command: run: \ -o backing_file=/var/tmp/.guestfs-0/appliance.d/root,backing_fmt=raw
libguestfs: command: run: \ /tmp/libguestfso7dtGK/overlay2.qcow2
Formatting '/tmp/libguestfso7dtGK/overlay2.qcow2', fmt=qcow2 size=4294967296 backing_file=/var/tmp/.guestfs-0/appliance.d/root backing_fmt=raw cluster_size=65536 lazy_refcounts=off refcount_bits=16
libguestfs: trace: disk_create = 0
libguestfs: trace: get_sockdir
libguestfs: trace: get_sockdir = "/tmp"
libguestfs: set_socket_create_context: getcon failed: (none): Invalid argument [you can ignore this message if you are not using SELinux + sVirt]
libguestfs: clear_socket_create_context: setsockcreatecon failed: NULL: Invalid argument [you can ignore this message if you are not using SELinux + sVirt]
libguestfs: create libvirt XML
libguestfs: trace: get_cachedir
libguestfs: trace: get_cachedir = "/var/tmp"
libguestfs: libvirt XML:\n\n\n guestfs-p1km7lhfowv8o0q1\n 768\n 768\n \n \n \n 1\n \n \n \n \n \n \n hvm\n /var/tmp/.guestfs-0/appliance.d/kernel\n /var/tmp/.guestfs-0/appliance.d/initrd\n panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=linux\n \n \n <on_reboot>destroy</on_reboot>\n \n \n /dev/urandom\n \n \n \n \n \n \n
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n qemu:commandline\n <qemu:env name="TMPDIR" value="/var/tmp"/>\n </qemu:commandline>\n\n
libguestfs: trace: get_cachedir
libguestfs: trace: get_cachedir = "/var/tmp"
libguestfs: command: run: ls
libguestfs: command: run: \ -a
libguestfs: command: run: \ -l
libguestfs: command: run: \ -R
libguestfs: command: run: \ -Z /var/tmp/.guestfs-0
libguestfs: /var/tmp/.guestfs-0:
libguestfs: drwxr-xr-x root root ? .
libguestfs: drwxrwxrwt. root root system_u:object_r:tmp_t:s0 ..
libguestfs: drwxr-xr-x root root ? appliance.d
libguestfs: -rw-r--r-- root root ? lock
libguestfs:
libguestfs: /var/tmp/.guestfs-0/appliance.d:
libguestfs: drwxr-xr-x root root ? .
libguestfs: drwxr-xr-x root root ? ..
libguestfs: -rw-r--r-- root root ? initrd
libguestfs: -rw-r--r-- root root ? kernel
libguestfs: -rw-r--r-- root root ? root
libguestfs: command: run: ls
libguestfs: command: run: \ -a
libguestfs: command: run: \ -l
libguestfs: command: run: \ -Z /tmp/libguestfsh2Idkp
libguestfs: drwxr-xr-x root root ? .
libguestfs: drwxrwxrwt. root root system_u:object_r:tmp_t:s0 ..
libguestfs: srw-rw---- root qemu ? console.sock
libguestfs: srw-rw---- root qemu ? guestfsd.sock
libguestfs: launch libvirt guest
libguestfs: responding to serial console Device Status Report
\x1b[1;256r\x1b[256;256H\x1b[6n
Google, Inc.
Serial Graphics Adapter 06/09/14
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (mockbuild@) Mon Jun 9 21:33:48 UTC 2014
Term: 80x24
4 0
SeaBIOS (version 1.11.0-2.el7)
Machine UUID 05ef63d4-149d-439b-9f26-9cb38ad3d0ab
Booting from ROM...
\x1b[2J[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0 (root@NSG) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-36) (GCC) ) #1 SMP Fri Nov 1 10:40:29 UTC 2019
[ 0.000000] Command line: panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=linux
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000002fffe000-0x000000002fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: last_pfn = 0x2fffe max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f63b0-0x000f63bf] mapped at [ffff8800000f63b0]
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x2fe93000-0x2ffeffff]
[ 0.000000] Early table checksum verification disabled
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20130517/tbxfroot-243)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000002fffdfff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x2fe6c000-0x2fe92fff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:2fe1c001, primary cpu clock
[ 0.000000] kvm-clock: using sched offset of 469986551 cycles
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x2fffdfff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x2fffdfff]
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: BOCHSCPU
[ 0.000000] MPTABLE: Product ID: 0.1
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 1
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x30000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 35 pages/cpu @ffff88002fa00000 s104856 r8192 d30312 u2097152
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 2fa13440
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 193415
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=linux
[ 0.000000] Disabling memory control group subsystem
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040
[ 0.000000] x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040
[ 0.000000] x86/fpu: xstate_offset[5]: 0440, xstate_sizes[5]: 0040
[ 0.000000] x86/fpu: xstate_offset[6]: 0480, xstate_sizes[6]: 0200
[ 0.000000] x86/fpu: xstate_offset[7]: 0680, xstate_sizes[7]: 0400
[ 0.000000] xsave: enabled xstate_bv 0xff, cntxt size 0xa80 using standard form
[ 0.000000] Memory: 751528k/786424k available (9076k kernel code, 392k absent, 34504k reserved, 5593k data, 1920k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] x86/pti: Unmapping kernel while in userspace
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] \tRCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:327936 nr_irqs:256 0
[ 0.000000] Console: colour *CGA 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Detected 2194.842 MHz processor
[ 0.081491] Calibrating delay loop (skipped) preset value.. 4389.68 BogoMIPS (lpj=2194842)
[ 0.082737] pid_max: default: 32768 minimum: 301
[ 0.083427] Security Framework initialized
[ 0.084051] SELinux: Disabled at boot.
[ 0.084616] Yama: becoming mindful.
[ 0.085397] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.086611] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.087716] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.088695] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.089881] Initializing cgroup subsys memory
[ 0.090524] Initializing cgroup subsys devices
[ 0.091186] Initializing cgroup subsys freezer
[ 0.091849] Initializing cgroup subsys blkio
[ 0.092476] Initializing cgroup subsys perf_event
[ 0.093172] Initializing cgroup subsys hugetlb
[ 0.093830] Initializing cgroup subsys pids
[ 0.094446] Initializing cgroup subsys net_prio
[ 0.095208] FEATURE SPEC_CTRL Present
[ 0.095763] FEATURE IBPB_SUPPORT Present
[ 0.097614] mce: CPU supports 10 MCE banks
[ 0.098280] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.099066] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.099846] tlb_flushall_shift: 6
[ 0.130148] Freeing SMP alternatives: 32k freed
[ 0.141606] ftrace: allocating 32908 entries in 129 pages
[ 0.193595] Enabling x2apic
[ 0.194040] Enabled x2apic
[ 0.194799] Switched APIC routing to physical x2apic.
[ 0.197092] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.197970] smpboot: CPU0: Intel(R) Xeon(R) Silver 4114 CPU @ 2.20GHz (fam: 06, model: 55, stepping: 04)
[ 0.199410] Performance Events: 32-deep LBR, Skylake events, Intel PMU driver.
[ 0.200556] ... version: 2
[ 0.201182] ... bit width: 48
[ 0.201786] ... generic registers: 8
[ 0.202371] ... value mask: 0000ffffffffffff
[ 0.203146] ... max period: 000000007fffffff
[ 0.203910] ... fixed-purpose events: 3
[ 0.204496] ... event mask: 00000007000000ff
[ 0.205281] KVM setup paravirtual spinlock
[ 0.208083] Brought up 1 CPUs
[ 0.208529] smpboot: Max logical packages: 1
[ 0.209155] smpboot: Total of 1 processors activated (4389.68 BogoMIPS)
[ 0.210565] devtmpfs: initialized
[ 0.213175] EVM: security.selinux
[ 0.213663] EVM: security.ima
[ 0.214100] EVM: security.capability
[ 0.215309] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.216315] pinctrl core: initialized pinctrl subsystem
[ 0.217171] RTC time: 9:25:29, date: 11/28/19
[ 0.217895] NET: Registered protocol family 16
[ 0.218918] PCI: Using configuration type 1 for base access
[ 0.220663] ACPI: Interpreter disabled.
[ 0.221278] vgaarb: loaded
[ 0.221720] SCSI subsystem initialized
[ 0.222322] usbcore: registered new interface driver usbfs
[ 0.223126] usbcore: registered new interface driver hub
[ 0.223903] usbcore: registered new device driver usb
[ 0.224649] pps_core: LinuxPPS API ver. 1 registered
[ 0.225374] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti(a)linux.it
[ 0.226686] PTP clock support registered
[ 0.227297] PCI: Probing PCI hardware
[ 0.227857] PCI host bridge to bus 0000:00
[ 0.228457] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.229352] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffffff]
[ 0.230396] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.237455] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.238486] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.239430] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.240455] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.266470] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
[ 0.267495] NetLabel: Initializing
[ 0.268001] NetLabel: domain hash size = 128
[ 0.268632] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.269360] NetLabel: unlabeled traffic allowed by default
[ 0.270239] amd_nb: Cannot enumerate AMD northbridges
[ 0.270978] Switched to clocksource kvm-clock
[ 0.275218] pnp: PnP ACPI: disabled
[ 0.276446] NET: Registered protocol family 2
[ 0.277219] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.278256] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.279216] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.280304] TCP: reno registered
[ 0.280784] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.281642] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.282598] NET: Registered protocol family 1
[ 0.283246] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.284115] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.284965] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.290549] Trying to unpack rootfs image as initramfs...
[ 0.292012] Freeing initrd memory: 1396k freed
[ 0.292917] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.294183] AES CTR mode by8 optimization enabled
[ 0.295077] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.296078] sha1_ssse3: Using AVX2 optimized SHA-1 implementation
[ 0.296991] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 0.298080] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.298967] Initialise system trusted keyring
[ 0.299635] audit: initializing netlink socket (disabled)
[ 0.300427] type=2000 audit(1574933130.283:1): initialized
[ 0.328740] bounce pool size: 64 pages
[ 0.329323] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.330242] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.331828] zpool: loaded
[ 0.332226] zbud: loaded
[ 0.332724] VFS: Disk quotas dquot_6.5.2
[ 0.333321] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.334536] fuse init (API version 7.22)
[ 0.335181] msgmni has been set to 1470
[ 0.335776] Key type big_key registered
[ 0.337262] NET: Registered protocol family 38
[ 0.337917] Key type asymmetric registered
[ 0.338528] Asymmetric key parser 'x509' registered
[ 0.339270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.340354] io scheduler noop registered
[ 0.340933] io scheduler deadline registered (default)
[ 0.341703] io scheduler cfq registered
[ 0.342369] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.343193] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.344265] virtio-pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 25
[ 0.345322] virtio_pci_probe:519: l_rc 0
[ 0.347050] virtio-pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 25
[ 0.348099] virtio_pci_probe:519: l_rc 0
[ 0.349225] virtio-pci 0000:00:05.0: PCI->APIC IRQ transform: INT A -> IRQ 24
[ 0.350270] virtio_pci_probe:519: l_rc 0
[ 0.351499] xenfs: not registering filesystem on non-xen platform
[ 0.352420] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.376262] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.377327] Non-volatile memory driver v1.3
[ 0.378010] ppdev: user-space parallel port driver
[ 0.378702] Linux agpgart interface v0.103
[ 0.379373] crash memory driver: version 1.1
[ 0.380765] brd: module loaded
[ 0.381490] loop: module loaded
[ 0.383169] scsi host0: ata_piix
[ 0.383695] scsi host1: ata_piix
[ 0.384194] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc080 irq 14
[ 0.385175] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc088 irq 15
[ 0.386444] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 0.387588] libphy: Fixed MDIO Bus: probed
[ 0.388200] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.389219] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.390300] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.391150] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.392014] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.6.27-k
[ 0.393155] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[ 0.394018] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 0.395050] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 0.395875] PPP generic driver version 2.4.2
[ 0.396517] PPP BSD Compression module registered
[ 0.397206] PPP Deflate Compression module registered
[ 0.397941] PPP MPPE Compression module registered
[ 0.398636] NET: Registered protocol family 24
[ 0.399291] PPTP driver version 0.8.5
[ 0.399886] Fusion MPT base driver 3.04.20
[ 0.400485] Copyright (c) 1999-2008 LSI Corporation
[ 0.401195] Fusion MPT SPI Host driver 3.04.20
[ 0.401875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.402818] ehci-pci: EHCI PCI platform driver
[ 0.403470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.404367] ohci-pci: OHCI PCI platform driver
[ 0.405025] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.405964] usbcore: registered new interface driver usbserial
[ 0.406814] usbcore: registered new interface driver usbserial_generic
[ 0.407759] usbserial: USB Serial support registered for generic
[ 0.408641] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.410420] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.411148] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.411924] mousedev: PS/2 mouse device common for all mice
[ 0.413006] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.414888] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input1
[ 0.416386] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.417392] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 0.418315] i2c /dev entries driver
[ 0.419091] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2
[ 0.420517] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel(a)redhat.com
[ 0.421750] cpuidle: using governor menu
[ 0.422369] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.423235] usbcore: registered new interface driver usbhid
[ 0.424040] usbhid: USB HID core driver
[ 0.424618] drop_monitor: Initializing network drop monitor service
[ 0.425539] nf_conntrack version 0.5.0 (5882 buckets, 23528 max)
[ 0.426509] gre: GRE over IPv4 demultiplexor driver
[ 0.427224] ip_gre: GRE over IPv4 tunneling driver
[ 0.428213] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.429043] TCP: cubic registered
[ 0.429528] Initializing XFRM netlink socket
[ 0.430215] NET: Registered protocol family 10
[ 0.430952] IPv6: addrconf_notify: lo: event 5
[ 0.431603] IPv6: addrconf_notify: bond0: event 5
[ 0.432302] IPv6: addrconf_notify: dummy0: event 5
[ 0.433018] IPv6: addrconf_notify: gre0: event 5
[ 0.433697] IPv6: addrconf_notify: gretap0: event 5
[ 0.434445] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.435461] sit: IPv6 over IPv4 tunneling driver
[ 0.436142] IPv6: addrconf_notify: sit0: event 16
[ 0.436859] IPv6: addrconf_notify: sit0: event 5
[ 0.437562] NET: Registered protocol family 17
[ 0.438224] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.440075] l2tp_core: L2TP core driver, V2.0
[ 0.440709] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 0.441404] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 0.442217] l2tp_netlink: L2TP netlink interface
[ 0.442893] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 0.443741] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 0.444674] 8021q: 802.1Q VLAN Support v1.8
[ 0.445427] microcode: CPU0 sig=0x50654, pf=0x1, revision=0x1
[ 0.446304] microcode: Microcode Update Driver: v2.01 tigran(a)aivazian.fsnet.co.uk, Peter Oruba
[ 0.447636] Loading compiled-in X.509 certificates
[ 0.448989] Loaded X.509 cert 'Magrathea: Glacier signing key: eb96f999c8e896eaa27874506d95259a433be287'
[ 0.450364] registered taskstats version 1
[ 0.451097] Key type trusted registered
[ 0.451761] Key type encrypted registered
[ 0.452420] IMA: No TPM chip found, activating TPM-bypass!
[ 0.453374] Magic number: 11:463:425
[ 0.454030] rtc_cmos rtc_cmos: setting system clock to 2019-11-28 09:25:29 UTC (1574933129)
[ 0.455257] Warning: unable to open an initial console.
[ 0.542964] Freeing unused kernel memory: 1920k freed [ 524.847541] EXT2-fs (ram0): error: can't find an ext2 filesystem on dev ram0.
[ 524.850045] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 524.850045]
[ 524.852720] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 524.852720]
[ 524.855380] CPU: 0 PID: 1 Comm: init Not tainted 3.10.0 #1
[ 524.856988] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 524.858664] Call Trace:
[ 524.859409] [] dump_stack+0x19/0x1b
[ 524.860924] [] dump_stack_buf+0xba/0xc0
[ 524.862533] [] panic+0xe1/0x206
[ 524.863950] [] do_exit+0xa36/0xa40
[ 524.864966] [] ? __do_page_fault+0x171/0x450
[ 524.866124] [] do_group_exit+0x3f/0xa0
[ 524.867191] [] SyS_exit_group+0x14/0x20
[ 524.868268] [] system_call_fastpath+0x16/0x1b
[ 524.869699] Kernel Offset: disabled
[ 524.870395] Rebooting in 1 seconds..libguestfs: error: error reading console messages from the appliance: Connection reset by peer
libguestfs: error: guestfs_launch failed, see earlier error messages
libguestfs: clear_socket_create_context: setsockcreatecon failed: NULL: Invalid argument [you can ignore this message if you are not using SELinux + sVirt]
libguestfs: trace: launch = -1 (error)
--
thanks for u !
4 years, 11 months
[PATCH nbdkit v2 0/3] filters: stats: More useful, more friendly
by Nir Soffer
- Use more friendly output with GiB and MiB/s
- Measure time per operation, providing finer grain stats
- Add total stats for understanding system throughput
- Add missing stats for flush
I hope that these changes will help to understand and improve virt-v2v
performance.
Changes since v1:
- Keep bytes values
- Increase precision to 0.001 GiB and 0.001 MiB/s
- Add total stats
- Show time before size/rate for more consistent format
- Streamline using new record_stat() and print_stat()
v1 was here:
https://www.redhat.com/archives/libguestfs/2019-November/msg00345.html
Nir Soffer (3):
filters: stats: Add size in GiB, show rate in MiB/s
filters: stats: Measure time per operation
filters: stats: Add flush stats
filters/stats/stats.c | 108 ++++++++++++++++++++++++++++++++++--------
1 file changed, 88 insertions(+), 20 deletions(-)
--
2.21.0
4 years, 12 months
[PATCH nbdkit 0/3] filters: stats: More useful, more friendly
by Nir Soffer
- Use more friendly output with GiB and MiB/s.
- Measure time per operation, providing finer grain stats
- Add missing stats for flush
I hope that these changes will help to understand and imporve virt-v2v
performance.
Nir Soffer (3):
filters: stats: Show size in GiB, rate in MiB/s
filters: stats: Measure time per operation
filters: stats: Add flush stats
filters/stats/stats.c | 117 ++++++++++++++++++++++++++++++++++--------
1 file changed, 96 insertions(+), 21 deletions(-)
--
2.21.0
4 years, 12 months
1.39 proposal: Let's split up the libguestfs git repo and tarballs
by Richard W.M. Jones
My contention is that the libguestfs git repository is too large and
unwieldy. There are too many separate, unrelated projects and as a
result of that the source has too many dependencies and takes too long
to build and test.
The project divides (sort of) naturally into layers -- the library,
the bindings, the various virt tools -- and could be split along those
lines into separate projects which can then be released and evolve at
their own pace.
My suggested split would be something like this:
* libguestfs: The library, daemon and appliance. That would include
the following directories in a single project:
appliance
bash
contrib
daemon
docs
examples
gnulib
lib
logo
test-tool
tmp
utils
website
* 1 project for each language binding:
csharp
erlang
gobject
golang
haskell
java
lua
ocaml
php
perl
python
ruby
* virt-customize and related tools, we'd probably call this subproject
"virt-builder". It would include virt-builder, virt-customize and
virt-sysprep, since they share a lot of common code.
* 1 project for each of the following items:
small tools written in C
(virt-cat, virt-filesystems, virt-log, virt-ls, virt-tail,
virt-diff, virt-edit, virt-format, guestmount, virt-inspector,
virt-make-fs, virt-rescue)
guestfish
virt-alignment-scan and virt-df
virt-dib
virt-get-kernel
virt-resize
virt-sparsify
virt-v2v and virt-p2v
virt-win-reg
* I'd be inclined to drop the legacy Perl tools virt-tar,
virt-list-filesystems, virt-list-partitions unless someone
especially wished to step forward to maintain them.
* common code and generator: Off to the side we'd somehow need to
package up the common code and the generator for use by all of the
above projects. It wouldn't be a separate project for downstream
packagers, but instead the code would be included (ie. duplicated)
in tarballs and upstream available as a side git repo that you'd
need to include when building (git submodule?). This is somewhat
unspecified.
M4, PO, and tests would be split between the projects as appropriate.
My proposal would be to do this incrementally, rather than all at
once, moving the easier things out first.
Thoughts?
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
4 years, 12 months