6:28 a.m.
Hi,
This patch series is based on a prior patch[1], splitting off changes as
requested and incorporating feedback from Richard Jones. It introduces type
validation to avoid segmentation faults (instead, it reports an exception) and
fixes handling of the bytes type in Python 3.
Major changes since that series:
- Drop newly introduced support for integer types for DWORD/QWORDS
- Reject Unicode string types for Python 3 (and restore bytes support).
- Adjusted tests due to new requirements.
These changes were tested with the following combinations:
- Arch Linux x86_64 - Python 2.7.8, 3.4.1
- Kubuntu 14.04 x86_64 - Python 2.7.6, 3.4.0
- Ubuntu 10.04 i686 - Python 2.6.5, 3.1.2. Note that Python 3.1.2 does not pass
the tests (syntax error) unless you remove the use of Unicode literals:
`sed 's/u"/"/' -i python/t/*.py`
Support for Unicode literals was removed in 3.0 and restored in 3.3 (PEP-414)
[1]: https://www.redhat.com/archives/libguestfs/2014-August/msg00051.html
Peter Wu (6):
python: use errors more specific than RuntimeError
python: use PyErr_NoMemory
python: check some types for get_value
python: fix crash by validating key and value
python: add heavier tests for setvalue
generator: Fix mixed tabs/spaces
configure.ac | 4 -
generator/generator.ml | 570 +++++++++++++++++++++--------------------
python/t/200-write.py | 4 +-
python/t/210-setvalue.py | 28 +-
python/t/300-setvalue-types.py | 80 ++++++
5 files changed, 386 insertions(+), 300 deletions(-)
create mode 100644 python/t/300-setvalue-types.py
--
2.0.4
6:28 a.m.
New subject: [PATCH 1/6] python: use errors more specific than RuntimeError
KeyError is documented as:
"Raised when a mapping (dictionary) key is not found in the set of
existing keys."
TypeError is documented as:
"Raised when an operation or function is applied to an object of
inappropriate type."
RuntimeError is documented as:
"Raised when an error is detected that doesn’t fall in any of the other
categories."
Let's be more specific with exceptions. The exception all inherit from
StandardError (and from Exception), but not from RuntimeError, so this
might need some code changes (if users would catch this specific error).
However, this behavior was not documented so it is perfectly fine to
change it.
---
generator/generator.ml | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/generator/generator.ml b/generator/generator.ml
index 0218b90..c65a3bd 100755
--- a/generator/generator.ml
+++ b/generator/generator.ml
@@ -2846,7 +2846,7 @@ get_value (PyObject *v, hive_set_value *ret)
obj = PyDict_GetItemString (v, \"key\");
if (!obj) {
- PyErr_SetString (PyExc_RuntimeError, \"no 'key' element in
dictionary\");
+ PyErr_SetString (PyExc_KeyError, \"no 'key' element in
dictionary\");
return -1;
}
#ifdef HAVE_PYSTRING_ASSTRING
@@ -2858,14 +2858,14 @@ get_value (PyObject *v, hive_set_value *ret)
obj = PyDict_GetItemString (v, \"t\");
if (!obj) {
- PyErr_SetString (PyExc_RuntimeError, \"no 't' element in
dictionary\");
+ PyErr_SetString (PyExc_KeyError, \"no 't' element in
dictionary\");
return -1;
}
ret->t = PyLong_AsLong (obj);
obj = PyDict_GetItemString (v, \"value\");
if (!obj) {
- PyErr_SetString (PyExc_RuntimeError, \"no 'value' element in
dictionary\");
+ PyErr_SetString (PyExc_KeyError, \"no 'value' element in
dictionary\");
return -1;
}
#ifdef HAVE_PYSTRING_ASSTRING
--
2.0.4
6:28 a.m.
New subject: [PATCH 2/6] python: use PyErr_NoMemory
If malloc fails, just throw a NoMemory exception rather than showing
"RuntimeError: Cannot allocate memory".
---
generator/generator.ml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/generator/generator.ml b/generator/generator.ml
index c65a3bd..1c35da9 100755
--- a/generator/generator.ml
+++ b/generator/generator.ml
@@ -2905,7 +2905,7 @@ get_values (PyObject *v, py_set_values *ret)
ret->nr_values = len;
ret->values = malloc (len * sizeof (hive_set_value));
if (!ret->values) {
- PyErr_SetString (PyExc_RuntimeError, strerror (errno));
+ PyErr_NoMemory ();
return -1;
}
--
2.0.4
6:28 a.m.
New subject: [PATCH 3/6] python: check some types for get_value
Recognise early that a value passed to node_get_value is not a dict
rather than spitting out "no 'key' element in dictionary".
Detect errors for invalid `t` elements instead of silently using `-1`.
---
generator/generator.ml | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/generator/generator.ml b/generator/generator.ml
index 1c35da9..44a4d47 100755
--- a/generator/generator.ml
+++ b/generator/generator.ml
@@ -2844,6 +2844,11 @@ get_value (PyObject *v, hive_set_value *ret)
PyObject *bytes;
#endif
+ if (!PyDict_Check (v)) {
+ PyErr_SetString (PyExc_TypeError, \"expected dictionary type for value\");
+ return -1;
+ }
+
obj = PyDict_GetItemString (v, \"key\");
if (!obj) {
PyErr_SetString (PyExc_KeyError, \"no 'key' element in
dictionary\");
@@ -2862,6 +2867,10 @@ get_value (PyObject *v, hive_set_value *ret)
return -1;
}
ret->t = PyLong_AsLong (obj);
+ if (PyErr_Occurred ()) {
+ PyErr_SetString (PyExc_TypeError, \"expected int type for 't'\");
+ return -1;
+ }
obj = PyDict_GetItemString (v, \"value\");
if (!obj) {
--
2.0.4
6:28 a.m.
New subject: [PATCH 4/6] python: fix crash by validating key and value
User-visible changes: no crashes if you try to pass a non-str type as
key/value in Python 3. Exceptions are thrown rather than silently
ignoring type violations (such as passing a Unicode string as value
in Python 2).
Until now, Python 2 keys and values were assumes to be bytes, in
Python 3 these were seen as Unicode strings instead. Remove the
compile-check for a deprecated Python 2 function (`PyString_AsString`)
and check for byte types instead.
For keys, accept both strings and bytes as the common case is to pass
a ASCII string name. (The `\u20ac` Unicode character (Euro-sign) is
apparently also valid as key name, verified with Python 3 and
Windows 7).
For values, be more conservative and reject all types except bytes. This
better matches the C API and removes the burden of character conversion
from the wrapper. Instead, callers should know the correct encoding
and terminate strings.
Modify tests to specify bytes instead of strings. (Otherwise Python 3
would break while Python 2 still passes.)
---
configure.ac | 4 ----
generator/generator.ml | 41 +++++++++++++++++++++++++----------------
python/t/200-write.py | 4 ++--
python/t/210-setvalue.py | 28 ++++++++++------------------
4 files changed, 37 insertions(+), 40 deletions(-)
diff --git a/configure.ac b/configure.ac
index f50daff..4566a32 100644
--- a/configure.ac
+++ b/configure.ac
@@ -345,10 +345,6 @@ AS_IF([test "x$enable_python" != "xno"],
[AC_DEFINE([HAVE_PYCAPSULE_NEW],1,
[Found PyCapsule_New in libpython])],
[],[$PYTHON_BLDLIBRARY])
- AC_CHECK_LIB([c],[PyString_AsString],
- [AC_DEFINE([HAVE_PYSTRING_ASSTRING],1,
- [Found PyString_AsString in libpython])],
- [],[$PYTHON_BLDLIBRARY])
LIBS="$old_LIBS"
fi
diff --git a/generator/generator.ml b/generator/generator.ml
index 44a4d47..3c7b5ab 100755
--- a/generator/generator.ml
+++ b/generator/generator.ml
@@ -2840,9 +2840,7 @@ static int
get_value (PyObject *v, hive_set_value *ret)
{
PyObject *obj;
-#ifndef HAVE_PYSTRING_ASSTRING
PyObject *bytes;
-#endif
if (!PyDict_Check (v)) {
PyErr_SetString (PyExc_TypeError, \"expected dictionary type for value\");
@@ -2854,12 +2852,20 @@ get_value (PyObject *v, hive_set_value *ret)
PyErr_SetString (PyExc_KeyError, \"no 'key' element in
dictionary\");
return -1;
}
-#ifdef HAVE_PYSTRING_ASSTRING
- ret->key = PyString_AsString (obj);
-#else
- bytes = PyUnicode_AsUTF8String (obj);
- ret->key = PyBytes_AS_STRING (bytes);
-#endif
+ if (PyUnicode_Check (obj)) {
+ /* TODO: use PyUnicode_DecodeASCII or PyUnicode_AsUTF16String instead? */
+ bytes = PyUnicode_AsUTF8String (obj);
+ if (bytes == NULL) {
+ PyErr_SetString (PyExc_ValueError, \"failed to decode 'key'\");
+ return -1;
+ }
+ ret->key = PyBytes_AS_STRING (bytes);
+ } else if (PyBytes_Check (obj)) {
+ ret->key = PyBytes_AS_STRING (obj);
+ } else {
+ PyErr_SetString (PyExc_TypeError, \"expected bytes type for
'key'\");
+ return -1;
+ }
obj = PyDict_GetItemString (v, \"t\");
if (!obj) {
@@ -2877,14 +2883,17 @@ get_value (PyObject *v, hive_set_value *ret)
PyErr_SetString (PyExc_KeyError, \"no 'value' element in
dictionary\");
return -1;
}
-#ifdef HAVE_PYSTRING_ASSTRING
- ret->value = PyString_AsString (obj);
- ret->len = PyString_Size (obj);
-#else
- bytes = PyUnicode_AsUTF8String (obj);
- ret->value = PyBytes_AS_STRING (bytes);
- ret->len = PyBytes_GET_SIZE (bytes);
-#endif
+ /* Support bytes only. As the registry can use multiple character sets, reject
+ * Unicode str types and let the caller handle conversion to nul-terminated
+ * UTF-16-LE, ASCII, etc. as necessary. This means that 'x' and b'x'
are valid
+ * in Python 2 (but not u'x') but that in Python 3, only b'x' is valid.
*/
+ if (PyBytes_Check (obj)) {
+ ret->len = PyBytes_GET_SIZE (obj);
+ ret->value = PyBytes_AS_STRING (obj);
+ } else {
+ PyErr_SetString (PyExc_TypeError, \"expected bytes type for
'value'\");
+ return -1;
+ }
return 0;
}
diff --git a/python/t/200-write.py b/python/t/200-write.py
index 0692f11..4759f82 100644
--- a/python/t/200-write.py
+++ b/python/t/200-write.py
@@ -37,7 +37,7 @@ b = h.node_get_child (root, "B")
assert b
values = [
- { "key": "Key1", "t": 3, "value":
"ABC" },
- { "key": "Key2", "t": 3, "value":
"DEF" }
+ { "key": "Key1", "t": 3, "value":
b"ABC" },
+ { "key": "Key2", "t": 3, "value":
b"DEF" }
]
h.node_set_values (b, values)
diff --git a/python/t/210-setvalue.py b/python/t/210-setvalue.py
index 8e7ed5c..495c55a 100644
--- a/python/t/210-setvalue.py
+++ b/python/t/210-setvalue.py
@@ -19,14 +19,6 @@ import sys
import os
import hivex
-if sys.version >= '3':
- import codecs
- def b(x):
- return codecs.encode(x)
-else:
- def b(x):
- return x
-
srcdir = os.environ["srcdir"]
if not srcdir:
srcdir = "."
@@ -44,23 +36,23 @@ B = h.node_get_child (root, "B")
assert B
values = [
- { "key": "Key1", "t": 3, "value":
"ABC" },
- { "key": "Key2", "t": 3, "value":
"DEF" }
+ { "key": "Key1", "t": 3, "value":
b"ABC" },
+ { "key": "Key2", "t": 3, "value":
b"DEF" }
]
h.node_set_values (B, values)
-value1 = { "key": "Key3", "t": 3, "value":
"GHI" }
+value1 = { "key": "Key3", "t": 3, "value":
b"GHI" }
h.node_set_value (B, value1)
-value1 = { "key": "Key1", "t": 3, "value":
"JKL" }
+value1 = { "key": "Key1", "t": 3, "value":
b"JKL" }
h.node_set_value (B, value1)
val = h.node_get_value (B, "Key1")
-t_data = h.value_value (val)
-assert t_data[0] == 3
-assert t_data[1] == b("JKL")
+val_t, val_value = h.value_value (val)
+assert val_t == 3
+assert val_value == b"JKL"
val = h.node_get_value (B, "Key3")
-t_data = h.value_value (val)
-assert t_data[0] == 3
-assert t_data[1] == b("GHI")
+val_t, val_value = h.value_value (val)
+assert val_t == 3
+assert val_value == b"GHI"
--
2.0.4
6:28 a.m.
New subject: [PATCH 5/6] python: add heavier tests for setvalue
Ensure that invalid types are not silently ignored (and test to avoid
segfaults).
---
python/t/300-setvalue-types.py | 80 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 python/t/300-setvalue-types.py
diff --git a/python/t/300-setvalue-types.py b/python/t/300-setvalue-types.py
new file mode 100644
index 0000000..7f9b2bc
--- /dev/null
+++ b/python/t/300-setvalue-types.py
@@ -0,0 +1,80 @@
+# Test various possible types for assignment to setvalue
+# Copyright (C) 2014 Peter Wu <peter(a)lekensteyn.nl>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+import hivex
+from hivex.hive_types import *
+import os
+
+srcdir = "."
+if "srcdir" in os.environ and os.environ["srcdir"]:
+ srcdir = os.environ["srcdir"]
+
+h = hivex.Hivex ("%s/../images/minimal" % srcdir,
+ write = True)
+
+def set_value (key = "test key", t = REG_BINARY, value = b"Val"):
+ global h
+ h.node_set_value (h.root (), {
+ "key": key,
+ "t": t,
+ "value": value
+ })
+
+def test_pass (key = "test key", t = REG_BINARY, value = b"Val"):
+ global h
+ set_value (key, t, value)
+ val = h.node_get_value (h.root (), key)
+ ret_type, ret_value = h.value_value (val)
+ assert t == ret_type, \
+ "expected type {0}, got {1}".format(t, ret_type)
+ assert value == ret_value, \
+ "expected value {0}, got {1}".format(value, ret_value)
+
+def test_exception (exception_type, **kwargs):
+ try:
+ set_value (**kwargs)
+ raise AssertionError("expected {0}".format(exception_type))
+ except exception_type:
+ pass
+
+
+# Good weather tests
+# Accept either bytes or unicode for ASCII string
+# TODO: fix node_get_value to handle UTF-16 string in bytes
+#test_pass (t = REG_BINARY, key = b"\x01\x02")
+test_pass (t = REG_SZ, key = u"ASCII key")
+# Try a byte with upper bit set
+test_pass (t = REG_DWORD, value = b"\xaa\xbb\xcc")
+
+
+# Bad weather tests
+# Invalid 'key' type
+test_exception (TypeError, key = 1)
+test_exception (TypeError, key = 1)
+# TODO: should non-ASCII strings be rejected?
+#test_exception (ValueError, key = u"Euro: \u20ac")
+
+# Invalid 't' type
+test_exception (TypeError, t = b"meh")
+
+# Invalid 'value' types
+test_exception (TypeError, t = REG_BINARY, value = 1)
+test_exception (TypeError, t = REG_DWORD, value = 1)
+test_exception (TypeError, t = REG_SZ, value = 1)
+test_exception (TypeError, t = REG_DWORD, value = None)
+# Unicode strings should be rejected, bytes only!
+test_exception (TypeError, t = REG_SZ, value = u"some text")
--
2.0.4
6:28 a.m.
New subject: [PATCH 6/6] generator: Fix mixed tabs/spaces
vim :set ts=8 :retab
---
generator/generator.ml | 512 ++++++++++++++++++++++++-------------------------
1 file changed, 256 insertions(+), 256 deletions(-)
diff --git a/generator/generator.ml b/generator/generator.ml
index 3c7b5ab..be783ae 100755
--- a/generator/generator.ml
+++ b/generator/generator.ml
@@ -1069,10 +1069,10 @@ here. Often it's not documented at all.
pr "\n";
if List.mem AUnusedFlags (snd style) then
- pr "The flags parameter is unused. Always pass 0.\n\n";
+ pr "The flags parameter is unused. Always pass 0.\n\n";
if List.mem ASetValues (snd style) then
- pr "C<values> is an array of (key, value) pairs. There
+ pr "C<values> is an array of (key, value) pairs. There
should be C<nr_values> elements in this array.
Any existing values stored at the node are discarded, and their
@@ -1080,7 +1080,7 @@ C<hive_value_h> handles become invalid. Thus you can remove
all
values stored at C<node> by passing C<nr_values = 0>.\n\n";
if List.mem ASetValue (snd style) then
- pr "C<value> is a single (key, value) pair.
+ pr "C<value> is a single (key, value) pair.
Existing C<hive_value_h> handles become invalid.\n\n";
@@ -1791,8 +1791,8 @@ static void raise_closed (const char *) Noreturn;
| ASetValues ->
pr " int nrvalues = Wosize_val (valuesv);\n";
pr " hive_set_value *values = HiveSetValues_val (valuesv);\n"
- | ASetValue ->
- pr " hive_set_value *val = HiveSetValue_val (valv);\n"
+ | ASetValue ->
+ pr " hive_set_value *val = HiveSetValue_val (valv);\n"
) (snd style);
pr "\n";
@@ -1864,9 +1864,9 @@ static void raise_closed (const char *) Noreturn;
| ASetValues ->
pr " free (values);\n";
pr "\n";
- | ASetValue ->
- pr " free (val);\n";
- pr "\n";
+ | ASetValue ->
+ pr " free (val);\n";
+ pr "\n";
) (snd style);
(* Check for errors. *)
@@ -1903,7 +1903,7 @@ static void raise_closed (const char *) Noreturn;
pr " free (r);\n"
| RStringList ->
pr " rv = caml_copy_string_array ((const char **) r);\n";
- pr " int i;\n";
+ pr " int i;\n";
pr " for (i = 0; r[i] != NULL; ++i) free (r[i]);\n";
pr " free (r);\n"
| RLenType -> pr " rv = copy_type_len (len, t);\n"
@@ -2220,45 +2220,45 @@ sub open {
* Therefore we don't generate prototypes for these two calls:
*)
if fst style <> RErrDispose && List.hd (snd style) = AHive then (
- let longdesc = replace_str longdesc "C<hivex_" "C<" in
- pr "=item %s\n\n " name;
- generate_perl_prototype name style;
- pr "\n\n";
- pr "%s\n\n" longdesc;
-
- (match fst style with
- | RErr
- | RErrDispose
- | RHive
- | RString
- | RStringList
- | RLenType
- | RLenValue
- | RLenTypeVal
- | RInt32
- | RInt64 -> ()
- | RSize ->
+ let longdesc = replace_str longdesc "C<hivex_" "C<" in
+ pr "=item %s\n\n " name;
+ generate_perl_prototype name style;
+ pr "\n\n";
+ pr "%s\n\n" longdesc;
+
+ (match fst style with
+ | RErr
+ | RErrDispose
+ | RHive
+ | RString
+ | RStringList
+ | RLenType
+ | RLenValue
+ | RLenTypeVal
+ | RInt32
+ | RInt64 -> ()
+ | RSize ->
pr "\
This returns a size.\n\n"
- | RNode ->
- pr "\
+ | RNode ->
+ pr "\
This returns a node handle.\n\n"
- | RNodeNotFound ->
- pr "\
+ | RNodeNotFound ->
+ pr "\
This returns a node handle, or C<undef> if the node was not found.\n\n"
- | RNodeList ->
- pr "\
+ | RNodeList ->
+ pr "\
This returns a list of node handles.\n\n"
- | RValue ->
- pr "\
+ | RValue ->
+ pr "\
This returns a value handle.\n\n"
- | RValueList ->
- pr "\
+ | RValueList ->
+ pr "\
This returns a list of value handles.\n\n"
- );
+ );
- if List.mem ASetValues (snd style) then
- pr "C<@values> is an array of (keys, value) pairs.
+ if List.mem ASetValues (snd style) then
+ pr "C<@values> is an array of (keys, value) pairs.
Each element should be a hashref containing C<key>, C<t> (type)
and C<data>.
@@ -2524,172 +2524,172 @@ DESTROY (h)
fun (name, style, _, longdesc) ->
(* The close and open calls are handled specially above. *)
if fst style <> RErrDispose && List.hd (snd style) = AHive then (
- (match fst style with
- | RErr -> pr "void\n"
- | RErrDispose -> failwith "perl bindings cannot handle a call which disposes of
the handle"
- | RHive -> failwith "perl bindings cannot handle a call which returns a
handle"
- | RSize
- | RNode
- | RNodeNotFound
- | RValue
- | RString -> pr "SV *\n"
- | RNodeList
- | RValueList
- | RStringList
- | RLenType
- | RLenValue
- | RLenTypeVal -> pr "void\n"
- | RInt32 -> pr "SV *\n"
- | RInt64 -> pr "SV *\n"
- );
-
- (* Call and arguments. *)
- let perl_params =
- filter_map (function
- | AUnusedFlags -> None
- | arg -> Some (name_of_argt arg)) (snd style) in
-
- let c_params =
- List.map (function
- | AUnusedFlags -> "0"
- | ASetValues -> "values.nr_values, values.values"
- | arg -> name_of_argt arg) (snd style) in
-
- pr "%s (%s)\n" name (String.concat ", " perl_params);
- iteri (
+ (match fst style with
+ | RErr -> pr "void\n"
+ | RErrDispose -> failwith "perl bindings cannot handle a call which
disposes of the handle"
+ | RHive -> failwith "perl bindings cannot handle a call which returns a
handle"
+ | RSize
+ | RNode
+ | RNodeNotFound
+ | RValue
+ | RString -> pr "SV *\n"
+ | RNodeList
+ | RValueList
+ | RStringList
+ | RLenType
+ | RLenValue
+ | RLenTypeVal -> pr "void\n"
+ | RInt32 -> pr "SV *\n"
+ | RInt64 -> pr "SV *\n"
+ );
+
+ (* Call and arguments. *)
+ let perl_params =
+ filter_map (function
+ | AUnusedFlags -> None
+ | arg -> Some (name_of_argt arg)) (snd style) in
+
+ let c_params =
+ List.map (function
+ | AUnusedFlags -> "0"
+ | ASetValues -> "values.nr_values, values.values"
+ | arg -> name_of_argt arg) (snd style) in
+
+ pr "%s (%s)\n" name (String.concat ", " perl_params);
+ iteri (
fun i ->
function
| AHive ->
- pr " hive_h *h;\n"
- | ANode n
- | AValue n ->
- pr " int %s;\n" n
- | AString n ->
- pr " char *%s;\n" n
+ pr " hive_h *h;\n"
+ | ANode n
+ | AValue n ->
+ pr " int %s;\n" n
+ | AString n ->
+ pr " char *%s;\n" n
| AStringNullable n ->
- (* http://www.perlmonks.org/?node_id=554277 *)
- pr " char *%s = SvOK(ST(%d)) ? SvPV_nolen(ST(%d)) : NULL;\n" n i i
- | AOpenFlags ->
- pr " int flags;\n"
- | AUnusedFlags -> ()
- | ASetValues ->
- pr " pl_set_values values = unpack_pl_set_values (ST(%d));\n" i
- | ASetValue ->
- pr " hive_set_value *val = unpack_set_value (ST(%d));\n" i
- ) (snd style);
-
- let free_args () =
- List.iter (
- function
- | ASetValues ->
- pr " free (values.values);\n"
- | ASetValue ->
- pr " free (val);\n"
- | AHive | ANode _ | AValue _ | AString _ | AStringNullable _
- | AOpenFlags | AUnusedFlags -> ()
- ) (snd style)
- in
-
- (* Code. *)
- (match fst style with
- | RErr ->
+ (* http://www.perlmonks.org/?node_id=554277 *)
+ pr " char *%s = SvOK(ST(%d)) ? SvPV_nolen(ST(%d)) :
NULL;\n" n i i
+ | AOpenFlags ->
+ pr " int flags;\n"
+ | AUnusedFlags -> ()
+ | ASetValues ->
+ pr " pl_set_values values = unpack_pl_set_values
(ST(%d));\n" i
+ | ASetValue ->
+ pr " hive_set_value *val = unpack_set_value (ST(%d));\n"
i
+ ) (snd style);
+
+ let free_args () =
+ List.iter (
+ function
+ | ASetValues ->
+ pr " free (values.values);\n"
+ | ASetValue ->
+ pr " free (val);\n"
+ | AHive | ANode _ | AValue _ | AString _ | AStringNullable _
+ | AOpenFlags | AUnusedFlags -> ()
+ ) (snd style)
+ in
+
+ (* Code. *)
+ (match fst style with
+ | RErr ->
pr "PREINIT:\n";
pr " int r;\n";
pr " PPCODE:\n";
pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == -1)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
+ name;
- | RErrDispose -> assert false
- | RHive -> assert false
+ | RErrDispose -> assert false
+ | RHive -> assert false
- | RSize
- | RNode
- | RValue ->
+ | RSize
+ | RNode
+ | RValue ->
pr "PREINIT:\n";
- pr " /* hive_node_h = hive_value_h = size_t so we cheat\n";
- pr " here to simplify the generator */\n";
+ pr " /* hive_node_h = hive_value_h = size_t so we cheat\n";
+ pr " here to simplify the generator */\n";
pr " size_t r;\n";
pr " CODE:\n";
pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == 0)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
+ name;
pr " RETVAL = newSViv (r);\n";
pr " OUTPUT:\n";
pr " RETVAL\n"
- | RNodeNotFound ->
+ | RNodeNotFound ->
pr "PREINIT:\n";
pr " hive_node_h r;\n";
pr " CODE:\n";
- pr " errno = 0;\n";
+ pr " errno = 0;\n";
pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == 0 && errno != 0)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
- pr " if (r == 0)\n";
+ name;
+ pr " if (r == 0)\n";
pr " RETVAL = &PL_sv_undef;\n";
- pr " else\n";
+ pr " else\n";
pr " RETVAL = newSViv (r);\n";
pr " OUTPUT:\n";
pr " RETVAL\n"
- | RString ->
+ | RString ->
pr "PREINIT:\n";
pr " char *r;\n";
pr " CODE:\n";
pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == NULL)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
+ name;
if f_len_exists name then
pr " RETVAL = newSVpvn_utf8 (r, hivex_%s_len (%s), 1);\n"
name (String.concat ", " c_params)
else
pr " RETVAL = newSVpv (r, 0);\n";
- pr " free (r);\n";
+ pr " free (r);\n";
pr " OUTPUT:\n";
pr " RETVAL\n"
- | RNodeList
- | RValueList ->
+ | RNodeList
+ | RValueList ->
pr "PREINIT:\n";
pr " size_t *r;\n";
pr " int i, n;\n";
pr " PPCODE:\n";
pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == NULL)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
+ name;
pr " for (n = 0; r[n] != 0; ++n) /**/;\n";
pr " EXTEND (SP, n);\n";
pr " for (i = 0; i < n; ++i)\n";
pr " PUSHs (sv_2mortal (newSViv (r[i])));\n";
pr " free (r);\n";
- | RStringList ->
+ | RStringList ->
pr "PREINIT:\n";
pr " char **r;\n";
pr " int i, n;\n";
pr " PPCODE:\n";
pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == NULL)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
+ name;
pr " for (n = 0; r[n] != NULL; ++n) /**/;\n";
pr " EXTEND (SP, n);\n";
pr " for (i = 0; i < n; ++i) {\n";
@@ -2698,86 +2698,86 @@ DESTROY (h)
pr " }\n";
pr " free (r);\n";
- | RLenType ->
- pr "PREINIT:\n";
- pr " int r;\n";
- pr " size_t len;\n";
- pr " hive_type type;\n";
- pr " PPCODE:\n";
+ | RLenType ->
+ pr "PREINIT:\n";
+ pr " int r;\n";
+ pr " size_t len;\n";
+ pr " hive_type type;\n";
+ pr " PPCODE:\n";
pr " r = hivex_%s (%s, &type, &len);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == -1)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
- pr " EXTEND (SP, 2);\n";
- pr " PUSHs (sv_2mortal (newSViv (type)));\n";
- pr " PUSHs (sv_2mortal (newSViv (len)));\n";
-
- | RLenValue ->
- pr "PREINIT:\n";
- pr " hive_value_h r;\n";
- pr " size_t len;\n";
- pr " PPCODE:\n";
+ name;
+ pr " EXTEND (SP, 2);\n";
+ pr " PUSHs (sv_2mortal (newSViv (type)));\n";
+ pr " PUSHs (sv_2mortal (newSViv (len)));\n";
+
+ | RLenValue ->
+ pr "PREINIT:\n";
+ pr " hive_value_h r;\n";
+ pr " size_t len;\n";
+ pr " PPCODE:\n";
pr " errno = 0;\n";
pr " r = hivex_%s (%s, &len);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == 0 && errno)\n";
pr " croak (\"%%s: \", \"%s\", strerror
(errno));\n"
- name;
- pr " EXTEND (SP, 2);\n";
- pr " PUSHs (sv_2mortal (newSViv (len)));\n";
- pr " PUSHs (sv_2mortal (newSViv (r)));\n";
-
- | RLenTypeVal ->
- pr "PREINIT:\n";
- pr " char *r;\n";
- pr " size_t len;\n";
- pr " hive_type type;\n";
- pr " PPCODE:\n";
+ name;
+ pr " EXTEND (SP, 2);\n";
+ pr " PUSHs (sv_2mortal (newSViv (len)));\n";
+ pr " PUSHs (sv_2mortal (newSViv (r)));\n";
+
+ | RLenTypeVal ->
+ pr "PREINIT:\n";
+ pr " char *r;\n";
+ pr " size_t len;\n";
+ pr " hive_type type;\n";
+ pr " PPCODE:\n";
pr " r = hivex_%s (%s, &type, &len);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == NULL)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
- pr " EXTEND (SP, 2);\n";
- pr " PUSHs (sv_2mortal (newSViv (type)));\n";
- pr " PUSHs (sv_2mortal (newSVpvn (r, len)));\n";
- pr " free (r);\n";
+ name;
+ pr " EXTEND (SP, 2);\n";
+ pr " PUSHs (sv_2mortal (newSViv (type)));\n";
+ pr " PUSHs (sv_2mortal (newSVpvn (r, len)));\n";
+ pr " free (r);\n";
- | RInt32 ->
+ | RInt32 ->
pr "PREINIT:\n";
pr " int32_t r;\n";
pr " CODE:\n";
- pr " errno = 0;\n";
+ pr " errno = 0;\n";
pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == -1 && errno != 0)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
+ name;
pr " RETVAL = newSViv (r);\n";
pr " OUTPUT:\n";
pr " RETVAL\n"
- | RInt64 ->
+ | RInt64 ->
pr "PREINIT:\n";
pr " int64_t r;\n";
pr " CODE:\n";
- pr " errno = 0;\n";
+ pr " errno = 0;\n";
pr " r = hivex_%s (%s);\n"
- name (String.concat ", " c_params);
- free_args ();
+ name (String.concat ", " c_params);
+ free_args ();
pr " if (r == -1 && errno != 0)\n";
pr " croak (\"%%s: %%s\", \"%s\", strerror
(errno));\n"
- name;
+ name;
pr " RETVAL = my_newSVll (r);\n";
pr " OUTPUT:\n";
pr " RETVAL\n"
- );
- pr "\n"
+ );
+ pr "\n"
)
) functions
@@ -3019,10 +3019,10 @@ put_val_type (char *val, size_t len, hive_type t)
pr " PyObject *py_r;\n";
let error_code =
- match fst style with
+ match fst style with
| RErr -> pr " int r;\n"; "-1"
- | RErrDispose -> pr " int r;\n"; "-1"
- | RHive -> pr " hive_h *r;\n"; "NULL"
+ | RErrDispose -> pr " int r;\n"; "-1"
+ | RHive -> pr " hive_h *r;\n"; "NULL"
| RSize -> pr " size_t r;\n"; "0"
| RNode -> pr " hive_node_h r;\n"; "0"
| RNodeNotFound ->
@@ -3060,11 +3060,11 @@ put_val_type (char *val, size_t len, hive_type t)
(* Call and arguments. *)
let c_params =
- List.map (function
- | AUnusedFlags -> "0"
- | ASetValues -> "values.nr_values, values.values"
+ List.map (function
+ | AUnusedFlags -> "0"
+ | ASetValues -> "values.nr_values, values.values"
| ASetValue -> "&val"
- | arg -> name_of_argt arg) (snd style) in
+ | arg -> name_of_argt arg) (snd style) in
let c_params =
match fst style with
| RLenType | RLenTypeVal -> c_params @ ["&t";
"&len"]
@@ -3074,23 +3074,23 @@ put_val_type (char *val, size_t len, hive_type t)
List.iter (
function
| AHive ->
- pr " hive_h *h;\n";
+ pr " hive_h *h;\n";
pr " PyObject *py_h;\n"
- | ANode n
- | AValue n ->
- pr " long %s;\n" n
- | AString n
+ | ANode n
+ | AValue n ->
+ pr " long %s;\n" n
+ | AString n
| AStringNullable n ->
- pr " char *%s;\n" n
- | AOpenFlags ->
- pr " int flags;\n"
- | AUnusedFlags -> ()
- | ASetValues ->
- pr " py_set_values values;\n";
- pr " PyObject *py_values;\n"
- | ASetValue ->
- pr " hive_set_value val;\n";
- pr " PyObject *py_val;\n"
+ pr " char *%s;\n" n
+ | AOpenFlags ->
+ pr " int flags;\n"
+ | AUnusedFlags -> ()
+ | ASetValues ->
+ pr " py_set_values values;\n";
+ pr " PyObject *py_values;\n"
+ | ASetValue ->
+ pr " hive_set_value val;\n";
+ pr " PyObject *py_val;\n"
) (snd style);
pr "\n";
@@ -3100,19 +3100,19 @@ put_val_type (char *val, size_t len, hive_type t)
List.iter (
function
| AHive ->
- pr "O"
- | ANode n
- | AValue n ->
- pr "l"
- | AString n ->
- pr "s"
+ pr "O"
+ | ANode n
+ | AValue n ->
+ pr "l"
+ | AString n ->
+ pr "s"
| AStringNullable n ->
- pr "z"
- | AOpenFlags ->
- pr "i"
- | AUnusedFlags -> ()
- | ASetValues
- | ASetValue ->
+ pr "z"
+ | AOpenFlags ->
+ pr "i"
+ | AUnusedFlags -> ()
+ | ASetValues
+ | ASetValue ->
pr "O"
) (snd style);
@@ -3121,19 +3121,19 @@ put_val_type (char *val, size_t len, hive_type t)
List.iter (
function
| AHive ->
- pr ", &py_h"
- | ANode n
- | AValue n ->
- pr ", &%s" n
- | AString n
+ pr ", &py_h"
+ | ANode n
+ | AValue n ->
+ pr ", &%s" n
+ | AString n
| AStringNullable n ->
- pr ", &%s" n
- | AOpenFlags ->
- pr ", &flags"
- | AUnusedFlags -> ()
- | ASetValues ->
+ pr ", &%s" n
+ | AOpenFlags ->
+ pr ", &flags"
+ | AUnusedFlags -> ()
+ | ASetValues ->
pr ", &py_values"
- | ASetValue ->
+ | ASetValue ->
pr ", &py_val"
) (snd style);
@@ -3145,16 +3145,16 @@ put_val_type (char *val, size_t len, hive_type t)
function
| AHive ->
pr " h = get_handle (py_h);\n"
- | ANode _
- | AValue _
- | AString _
+ | ANode _
+ | AValue _
+ | AString _
| AStringNullable _
- | AOpenFlags
- | AUnusedFlags -> ()
- | ASetValues ->
+ | AOpenFlags
+ | AUnusedFlags -> ()
+ | ASetValues ->
pr " if (get_values (py_values, &values) == -1)\n";
pr " return NULL;\n"
- | ASetValue ->
+ | ASetValue ->
pr " if (get_value (py_val, &val) == -1)\n";
pr " return NULL;\n"
) (snd style);
@@ -3165,12 +3165,12 @@ put_val_type (char *val, size_t len, hive_type t)
(* Free up arguments. *)
List.iter (
function
- | AHive | ANode _ | AValue _
+ | AHive | ANode _ | AValue _
| AString _ | AStringNullable _
- | AOpenFlags | AUnusedFlags -> ()
- | ASetValues ->
- pr " free (values.values);\n"
- | ASetValue -> ()
+ | AOpenFlags | AUnusedFlags -> ()
+ | ASetValues ->
+ pr " free (values.values);\n"
+ | ASetValue -> ()
) (snd style);
(* Check for errors from C library. *)
@@ -3359,13 +3359,13 @@ class Hivex(object):
fun arg ->
pr ", ";
match arg with
- | AHive -> assert false
+ | AHive -> assert false
| ANode n | AValue n
| AString n | AStringNullable n -> pr "%s" n
- | AOpenFlags
+ | AOpenFlags
| AUnusedFlags -> assert false
- | ASetValues -> pr "values"
- | ASetValue -> pr "val"
+ | ASetValues -> pr "values"
+ | ASetValue -> pr "val"
) args;
pr ")\n";
pr "\n"
@@ -3419,9 +3419,9 @@ and generate_ruby_c () =
#define RSTRING_PTR(r) (RSTRING((r))->ptr)
#endif
-static VALUE m_hivex; /* hivex module */
-static VALUE c_hivex; /* hive_h handle */
-static VALUE e_Error; /* used for all errors */
+static VALUE m_hivex; /* hivex module */
+static VALUE c_hivex; /* hive_h handle */
+static VALUE e_Error; /* used for all errors */
static void
ruby_hivex_free (void *hvp)
@@ -3576,10 +3576,10 @@ get_values (VALUE valuesv, size_t *nr_values)
pr "\n";
let error_code =
- match ret with
+ match ret with
| RErr -> pr " int r;\n"; "-1"
- | RErrDispose -> pr " int r;\n"; "-1"
- | RHive -> pr " hive_h *r;\n"; "NULL"
+ | RErrDispose -> pr " int r;\n"; "-1"
+ | RHive -> pr " hive_h *r;\n"; "NULL"
| RSize -> pr " size_t r;\n"; "0"
| RNode -> pr " hive_node_h r;\n"; "0"
| RNodeNotFound ->
--
2.0.4
5:22 a.m.
On Sat, Aug 16, 2014 at 01:28:44PM +0200, Peter Wu wrote:
Hi,
This patch series is based on a prior patch[1], splitting off changes as
requested and incorporating feedback from Richard Jones. It introduces type
validation to avoid segmentation faults (instead, it reports an exception) and
fixes handling of the bytes type in Python 3.
I have pushed the patches upstream.
Thanks for your contribution.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
3971
days inactive
3973
days old
7 comments
2 participants
participants (2)
-
Peter Wu -
Richard W.M. Jones