12:02 p.m.
These are a couple of patches in preparation for the Block Status
implementation. While the patches (especially the second one) are
very large they are really just elementary code motion.
Rich.
12:02 p.m.
New subject: [PATCH nbdkit 1/2] server: connections: Move struct connection to internal header file.
The connection struct has grown a large range of fields that are
stored per-connection but are not associated with the
server/connections.c code. The protocol code freely accesses these
fields (because it was in the same file) but for other fields accessed
in other parts of nbdkit there were awkward accessor functions.
In this commit the structure is simply moved as a whole to
server/internal.h, thus allowing other parts of nbdkit free access.
In future it may be worth splitting this structure.
---
server/internal.h | 51 +++++++++++++++++++----------
server/connections.c | 77 +-------------------------------------------
server/crypto.c | 16 ++++-----
server/locks.c | 4 +--
4 files changed, 45 insertions(+), 103 deletions(-)
diff --git a/server/internal.h b/server/internal.h
index 506882b..8427401 100644
--- a/server/internal.h
+++ b/server/internal.h
@@ -1,5 +1,5 @@
/* nbdkit
- * Copyright (C) 2013-2018 Red Hat Inc.
+ * Copyright (C) 2013-2019 Red Hat Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -147,6 +147,7 @@ extern void cleanup_unlock (pthread_mutex_t **ptr);
/* connections.c */
struct connection;
+
typedef int (*connection_recv_function) (struct connection *,
void *buf, size_t len)
__attribute__((__nonnull__ (1, 2)));
@@ -155,28 +156,44 @@ typedef int (*connection_send_function) (struct connection *,
__attribute__((__nonnull__ (1, 2)));
typedef void (*connection_close_function) (struct connection *)
__attribute__((__nonnull__ (1)));
+
+struct connection {
+ pthread_mutex_t request_lock;
+ pthread_mutex_t read_lock;
+ pthread_mutex_t write_lock;
+ pthread_mutex_t status_lock;
+ int status; /* 1 for more I/O with client, 0 for shutdown, -1 on error */
+ void *crypto_session;
+ int nworkers;
+
+ void **handles;
+ size_t nr_handles;
+
+ uint32_t cflags;
+ uint64_t exportsize;
+ uint16_t eflags;
+ bool readonly;
+ bool can_flush;
+ bool is_rotational;
+ bool can_trim;
+ bool can_zero;
+ bool can_fua;
+ bool can_multi_conn;
+ bool using_tls;
+ bool structured_replies;
+
+ int sockin, sockout;
+ connection_recv_function recv;
+ connection_send_function send;
+ connection_close_function close;
+};
+
extern int handle_single_connection (int sockin, int sockout);
extern int connection_set_handle (struct connection *conn,
size_t i, void *handle)
__attribute__((__nonnull__ (1 /* not 3 */)));
extern void *connection_get_handle (struct connection *conn, size_t i)
__attribute__((__nonnull__ (1)));
-extern pthread_mutex_t *connection_get_request_lock (struct connection *conn)
- __attribute__((__nonnull__ (1)));
-extern void connection_set_crypto_session (struct connection *conn,
- void *session)
- __attribute__((__nonnull__ (1 /* not 2 */)));
-extern void *connection_get_crypto_session (struct connection *conn)
- __attribute__((__nonnull__ (1)));
-extern void connection_set_recv (struct connection *,
- connection_recv_function)
- __attribute__((__nonnull__ (1, 2)));
-extern void connection_set_send (struct connection *,
- connection_send_function)
- __attribute__((__nonnull__ (1, 2)));
-extern void connection_set_close (struct connection *,
- connection_close_function)
- __attribute__((__nonnull__ (1, 2)));
/* crypto.c */
#define root_tls_certificates_dir sysconfdir "/pki/" PACKAGE_NAME
diff --git a/server/connections.c b/server/connections.c
index 7864602..7be282f 100644
--- a/server/connections.c
+++ b/server/connections.c
@@ -1,5 +1,5 @@
/* nbdkit
- * Copyright (C) 2013-2018 Red Hat Inc.
+ * Copyright (C) 2013-2019 Red Hat Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -62,38 +62,6 @@
/* Default number of parallel requests. */
#define DEFAULT_PARALLEL_REQUESTS 16
-/* Connection structure. */
-struct connection {
- pthread_mutex_t request_lock;
- pthread_mutex_t read_lock;
- pthread_mutex_t write_lock;
- pthread_mutex_t status_lock;
- int status; /* 1 for more I/O with client, 0 for shutdown, -1 on error */
- void *crypto_session;
- int nworkers;
-
- void **handles;
- size_t nr_handles;
-
- uint32_t cflags;
- uint64_t exportsize;
- uint16_t eflags;
- bool readonly;
- bool can_flush;
- bool is_rotational;
- bool can_trim;
- bool can_zero;
- bool can_fua;
- bool can_multi_conn;
- bool using_tls;
- bool structured_replies;
-
- int sockin, sockout;
- connection_recv_function recv;
- connection_send_function send;
- connection_close_function close;
-};
-
static struct connection *new_connection (int sockin, int sockout,
int nworkers);
static void free_connection (struct connection *conn);
@@ -105,9 +73,6 @@ static int raw_recv (struct connection *, void *buf, size_t len);
static int raw_send (struct connection *, const void *buf, size_t len);
static void raw_close (struct connection *);
-/* Accessors for public fields in the connection structure.
- * Everything else is private to this file.
- */
int
connection_set_handle (struct connection *conn, size_t i, void *handle)
{
@@ -141,46 +106,6 @@ connection_get_handle (struct connection *conn, size_t i)
return NULL;
}
-pthread_mutex_t *
-connection_get_request_lock (struct connection *conn)
-{
- return &conn->request_lock;
-}
-
-void
-connection_set_crypto_session (struct connection *conn, void *session)
-{
- conn->crypto_session = session;
-}
-
-void *
-connection_get_crypto_session (struct connection *conn)
-{
- return conn->crypto_session;
-}
-
-/* The code in crypto.c uses these three functions to replace the
- * recv, send and close callbacks when a connection is upgraded to
- * TLS.
- */
-void
-connection_set_recv (struct connection *conn, connection_recv_function recv)
-{
- conn->recv = recv;
-}
-
-void
-connection_set_send (struct connection *conn, connection_send_function send)
-{
- conn->send = send;
-}
-
-void
-connection_set_close (struct connection *conn, connection_close_function close)
-{
- conn->close = close;
-}
-
static int
get_status (struct connection *conn)
{
diff --git a/server/crypto.c b/server/crypto.c
index 4638a69..625b290 100644
--- a/server/crypto.c
+++ b/server/crypto.c
@@ -315,7 +315,7 @@ crypto_free (void)
static int
crypto_recv (struct connection *conn, void *vbuf, size_t len)
{
- gnutls_session_t *session = connection_get_crypto_session (conn);
+ gnutls_session_t *session = conn->crypto_session;
char *buf = vbuf;
ssize_t r;
bool first_read = true;
@@ -352,7 +352,7 @@ crypto_recv (struct connection *conn, void *vbuf, size_t len)
static int
crypto_send (struct connection *conn, const void *vbuf, size_t len)
{
- gnutls_session_t *session = connection_get_crypto_session (conn);
+ gnutls_session_t *session = conn->crypto_session;
const char *buf = vbuf;
ssize_t r;
@@ -378,7 +378,7 @@ crypto_send (struct connection *conn, const void *vbuf, size_t len)
static void
crypto_close (struct connection *conn)
{
- gnutls_session_t *session = connection_get_crypto_session (conn);
+ gnutls_session_t *session = conn->crypto_session;
int sockin, sockout;
assert (session != NULL);
@@ -394,7 +394,7 @@ crypto_close (struct connection *conn)
gnutls_deinit (*session);
free (session);
- connection_set_crypto_session (conn, NULL);
+ conn->crypto_session = NULL;
}
/* Upgrade an existing connection to TLS. Also this should do access
@@ -501,10 +501,10 @@ crypto_negotiate_tls (struct connection *conn, int sockin, int
sockout)
/* Set up the connection recv/send/close functions so they call
* GnuTLS wrappers instead.
*/
- connection_set_crypto_session (conn, session);
- connection_set_recv (conn, crypto_recv);
- connection_set_send (conn, crypto_send);
- connection_set_close (conn, crypto_close);
+ conn->crypto_session = session;
+ conn->recv = crypto_recv;
+ conn->send = crypto_send;
+ conn->close = crypto_close;
return 0;
error:
diff --git a/server/locks.c b/server/locks.c
index 1724b5a..347c13a 100644
--- a/server/locks.c
+++ b/server/locks.c
@@ -74,7 +74,7 @@ lock_request (struct connection *conn)
pthread_mutex_lock (&all_requests_lock);
if (thread_model <= NBDKIT_THREAD_MODEL_SERIALIZE_REQUESTS)
- pthread_mutex_lock (connection_get_request_lock (conn));
+ pthread_mutex_lock (&conn->request_lock);
pthread_rwlock_rdlock (&unload_prevention_lock);
}
@@ -85,7 +85,7 @@ unlock_request (struct connection *conn)
pthread_rwlock_unlock (&unload_prevention_lock);
if (thread_model <= NBDKIT_THREAD_MODEL_SERIALIZE_REQUESTS)
- pthread_mutex_unlock (connection_get_request_lock (conn));
+ pthread_mutex_unlock (&conn->request_lock);
if (thread_model <= NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS)
pthread_mutex_unlock (&all_requests_lock);
--
2.20.1
12:02 p.m.
New subject: [PATCH nbdkit 2/2] server: Split out NBD protocol code from connections code.
The code handling the NBD protocol was located in the same file as the
code handling connections, for not really any reason except historical.
This is quite a large code movement which splits out the protocol code
into four new files:
server/protocol-handshake.c initial handshake
server/protocol-handshake-newstyle.c " " (newstyle)
server/protocol-handshake-oldstyle.c " " (oldstyle)
server/protocol.c requests and replies
This also renames functions more logically and gets rid of functions
named with leading underscores.
---
server/internal.h | 22 +
server/connections.c | 1203 +-------------------------
server/protocol-handshake-newstyle.c | 609 +++++++++++++
server/protocol-handshake-oldstyle.c | 94 ++
server/protocol-handshake.c | 130 +++
server/protocol.c | 515 +++++++++++
server/Makefile.am | 4 +
7 files changed, 1389 insertions(+), 1188 deletions(-)
diff --git a/server/internal.h b/server/internal.h
index 8427401..d40a82d 100644
--- a/server/internal.h
+++ b/server/internal.h
@@ -194,6 +194,28 @@ extern int connection_set_handle (struct connection *conn,
__attribute__((__nonnull__ (1 /* not 3 */)));
extern void *connection_get_handle (struct connection *conn, size_t i)
__attribute__((__nonnull__ (1)));
+extern int connection_get_status (struct connection *conn)
+ __attribute__((__nonnull__ (1)));
+extern int connection_set_status (struct connection *conn, int value)
+ __attribute__((__nonnull__ (1)));
+
+/* protocol-handshake.c */
+extern int protocol_handshake (struct connection *conn)
+ __attribute__((__nonnull__ (1)));
+extern int protocol_compute_eflags (struct connection *conn, uint16_t *flags)
+ __attribute__((__nonnull__ (1, 2)));
+
+/* protocol-handshake-oldstyle.c */
+extern int protocol_handshake_oldstyle (struct connection *conn)
+ __attribute__((__nonnull__ (1)));
+
+/* protocol-handshake-newstyle.c */
+extern int protocol_handshake_newstyle (struct connection *conn)
+ __attribute__((__nonnull__ (1)));
+
+/* protocol.c */
+extern int protocol_recv_request_send_reply (struct connection *conn)
+ __attribute__((__nonnull__ (1)));
/* crypto.c */
#define root_tls_certificates_dir sysconfdir "/pki/" PACKAGE_NAME
diff --git a/server/connections.c b/server/connections.c
index 7be282f..4ded28d 100644
--- a/server/connections.c
+++ b/server/connections.c
@@ -39,25 +39,8 @@
#include <inttypes.h>
#include <string.h>
#include <unistd.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <stddef.h>
-#include <assert.h>
-
-#include <pthread.h>
#include "internal.h"
-#include "byte-swapping.h"
-#include "protocol.h"
-
-/* Maximum read or write request that we will handle. */
-#define MAX_REQUEST_SIZE (64 * 1024 * 1024)
-
-/* Maximum number of client options we allow before giving up. */
-#define MAX_NR_OPTIONS 32
-
-/* Maximum length of any option data (bytes). */
-#define MAX_OPTION_LENGTH 4096
/* Default number of parallel requests. */
#define DEFAULT_PARALLEL_REQUESTS 16
@@ -65,8 +48,6 @@
static struct connection *new_connection (int sockin, int sockout,
int nworkers);
static void free_connection (struct connection *conn);
-static int negotiate_handshake (struct connection *conn);
-static int recv_request_send_reply (struct connection *conn);
/* Don't call these raw socket functions directly. Use conn->recv etc. */
static int raw_recv (struct connection *, void *buf, size_t len);
@@ -106,8 +87,8 @@ connection_get_handle (struct connection *conn, size_t i)
return NULL;
}
-static int
-get_status (struct connection *conn)
+int
+connection_get_status (struct connection *conn)
{
int r;
@@ -120,9 +101,10 @@ get_status (struct connection *conn)
}
/* Update the status if the new value is lower than the existing value.
- * For convenience, return the incoming value. */
-static int
-set_status (struct connection *conn, int value)
+ * For convenience, return the incoming value.
+ */
+int
+connection_set_status (struct connection *conn, int value)
{
if (conn->nworkers)
pthread_mutex_lock (&conn->status_lock);
@@ -150,8 +132,8 @@ connection_worker (void *data)
threadlocal_set_name (name);
free (worker);
- while (!quit && get_status (conn) > 0)
- recv_request_send_reply (conn);
+ while (!quit && connection_get_status (conn) > 0)
+ protocol_recv_request_send_reply (conn);
debug ("exiting worker thread %s", threadlocal_get_name ());
free (name);
return NULL;
@@ -199,14 +181,14 @@ _handle_single_connection (int sockin, int sockout)
goto done;
/* Handshake. */
- if (negotiate_handshake (conn) == -1)
+ if (protocol_handshake (conn) == -1)
goto done;
if (!nworkers) {
/* No need for a separate thread. */
debug ("handshake complete, processing requests serially");
- while (!quit && get_status (conn) > 0)
- recv_request_send_reply (conn);
+ while (!quit && connection_get_status (conn) > 0)
+ protocol_recv_request_send_reply (conn);
}
else {
/* Create thread pool to process requests. */
@@ -224,12 +206,12 @@ _handle_single_connection (int sockin, int sockout)
if (!worker) {
perror ("malloc");
- set_status (conn, -1);
+ connection_set_status (conn, -1);
goto wait;
}
if (asprintf (&worker->name, "%s.%d", plugin_name, nworkers) <
0) {
perror ("asprintf");
- set_status (conn, -1);
+ connection_set_status (conn, -1);
free (worker);
goto wait;
}
@@ -239,7 +221,7 @@ _handle_single_connection (int sockin, int sockout)
if (err) {
errno = err;
perror ("pthread_create");
- set_status (conn, -1);
+ connection_set_status (conn, -1);
free (worker);
goto wait;
}
@@ -261,7 +243,7 @@ _handle_single_connection (int sockin, int sockout)
if (r == -1)
goto done;
- ret = get_status (conn);
+ ret = connection_get_status (conn);
done:
free_connection (conn);
return ret;
@@ -335,1161 +317,6 @@ free_connection (struct connection *conn)
free (conn);
}
-static int
-compute_eflags (struct connection *conn, uint16_t *flags)
-{
- uint16_t eflags = NBD_FLAG_HAS_FLAGS;
- int fl;
-
- fl = backend->can_write (backend, conn);
- if (fl == -1)
- return -1;
- if (readonly || !fl) {
- eflags |= NBD_FLAG_READ_ONLY;
- conn->readonly = true;
- }
- if (!conn->readonly) {
- fl = backend->can_zero (backend, conn);
- if (fl == -1)
- return -1;
- if (fl) {
- eflags |= NBD_FLAG_SEND_WRITE_ZEROES;
- conn->can_zero = true;
- }
-
- fl = backend->can_trim (backend, conn);
- if (fl == -1)
- return -1;
- if (fl) {
- eflags |= NBD_FLAG_SEND_TRIM;
- conn->can_trim = true;
- }
-
- fl = backend->can_fua (backend, conn);
- if (fl == -1)
- return -1;
- if (fl) {
- eflags |= NBD_FLAG_SEND_FUA;
- conn->can_fua = true;
- }
- }
-
- fl = backend->can_flush (backend, conn);
- if (fl == -1)
- return -1;
- if (fl) {
- eflags |= NBD_FLAG_SEND_FLUSH;
- conn->can_flush = true;
- }
-
- fl = backend->is_rotational (backend, conn);
- if (fl == -1)
- return -1;
- if (fl) {
- eflags |= NBD_FLAG_ROTATIONAL;
- conn->is_rotational = true;
- }
-
- fl = backend->can_multi_conn (backend, conn);
- if (fl == -1)
- return -1;
- if (fl) {
- eflags |= NBD_FLAG_CAN_MULTI_CONN;
- conn->can_multi_conn = true;
- }
-
- *flags = eflags;
- return 0;
-}
-
-static int
-_negotiate_handshake_oldstyle (struct connection *conn)
-{
- struct old_handshake handshake;
- int64_t r;
- uint64_t exportsize;
- uint16_t gflags, eflags;
-
- /* In --tls=require / FORCEDTLS mode, old style handshakes are
- * rejected because they cannot support TLS.
- */
- if (tls == 2) {
- nbdkit_error ("non-TLS client tried to connect in --tls=require mode");
- return -1;
- }
-
- r = backend->get_size (backend, conn);
- if (r == -1)
- return -1;
- if (r < 0) {
- nbdkit_error (".get_size function returned invalid value "
- "(%" PRIi64 ")", r);
- return -1;
- }
- exportsize = (uint64_t) r;
- conn->exportsize = exportsize;
-
- gflags = 0;
- if (compute_eflags (conn, &eflags) < 0)
- return -1;
-
- debug ("oldstyle negotiation: flags: global 0x%x export 0x%x",
- gflags, eflags);
-
- memset (&handshake, 0, sizeof handshake);
- memcpy (handshake.nbdmagic, "NBDMAGIC", 8);
- handshake.version = htobe64 (OLD_VERSION);
- handshake.exportsize = htobe64 (exportsize);
- handshake.gflags = htobe16 (gflags);
- handshake.eflags = htobe16 (eflags);
-
- if (conn->send (conn, &handshake, sizeof handshake) == -1) {
- nbdkit_error ("write: %m");
- return -1;
- }
-
- return 0;
-}
-
-/* Receive newstyle options. */
-
-static int
-send_newstyle_option_reply (struct connection *conn,
- uint32_t option, uint32_t reply)
-{
- struct fixed_new_option_reply fixed_new_option_reply;
-
- fixed_new_option_reply.magic = htobe64 (NBD_REP_MAGIC);
- fixed_new_option_reply.option = htobe32 (option);
- fixed_new_option_reply.reply = htobe32 (reply);
- fixed_new_option_reply.replylen = htobe32 (0);
-
- if (conn->send (conn,
- &fixed_new_option_reply,
- sizeof fixed_new_option_reply) == -1) {
- nbdkit_error ("write: %m");
- return -1;
- }
-
- return 0;
-}
-
-static int
-send_newstyle_option_reply_exportname (struct connection *conn,
- uint32_t option, uint32_t reply,
- const char *exportname)
-{
- struct fixed_new_option_reply fixed_new_option_reply;
- size_t name_len = strlen (exportname);
- uint32_t len;
-
- fixed_new_option_reply.magic = htobe64 (NBD_REP_MAGIC);
- fixed_new_option_reply.option = htobe32 (option);
- fixed_new_option_reply.reply = htobe32 (reply);
- fixed_new_option_reply.replylen = htobe32 (name_len + sizeof (len));
-
- if (conn->send (conn,
- &fixed_new_option_reply,
- sizeof fixed_new_option_reply) == -1) {
- nbdkit_error ("write: %m");
- return -1;
- }
-
- len = htobe32 (name_len);
- if (conn->send (conn, &len, sizeof len) == -1) {
- nbdkit_error ("write: %m");
- return -1;
- }
- if (conn->send (conn, exportname, name_len) == -1) {
- nbdkit_error ("write: %m");
- return -1;
- }
-
- return 0;
-}
-
-static int
-send_newstyle_option_reply_info_export (struct connection *conn,
- uint32_t option, uint32_t reply,
- uint16_t info)
-{
- struct fixed_new_option_reply fixed_new_option_reply;
- struct fixed_new_option_reply_info_export export;
-
- fixed_new_option_reply.magic = htobe64 (NBD_REP_MAGIC);
- fixed_new_option_reply.option = htobe32 (option);
- fixed_new_option_reply.reply = htobe32 (reply);
- fixed_new_option_reply.replylen = htobe32 (sizeof export);
- export.info = htobe16 (info);
- export.exportsize = htobe64 (conn->exportsize);
- export.eflags = htobe16 (conn->eflags);
-
- if (conn->send (conn,
- &fixed_new_option_reply,
- sizeof fixed_new_option_reply) == -1 ||
- conn->send (conn, &export, sizeof export) == -1) {
- nbdkit_error ("write: %m");
- return -1;
- }
-
- return 0;
-}
-
-/* Sub-function during _negotiate_handshake_newstyle, to uniformly handle
- * a client hanging up on a message boundary.
- */
-static int __attribute__ ((format (printf, 4, 5)))
-conn_recv_full (struct connection *conn, void *buf, size_t len,
- const char *fmt, ...)
-{
- int r = conn->recv (conn, buf, len);
- va_list args;
-
- if (r == -1) {
- va_start (args, fmt);
- nbdkit_verror (fmt, args);
- va_end (args);
- return -1;
- }
- if (r == 0) {
- /* During negotiation, client EOF on message boundary is less
- * severe than failure in the middle of the buffer. */
- debug ("client closed input socket, closing connection");
- return -1;
- }
- return r;
-}
-
-/* Sub-function of _negotiate_handshake_newstyle_options below. It
- * must be called on all non-error paths out of the options for-loop
- * in that function.
- */
-static int
-finish_newstyle_options (struct connection *conn)
-{
- int64_t r;
-
- r = backend->get_size (backend, conn);
- if (r == -1)
- return -1;
- if (r < 0) {
- nbdkit_error (".get_size function returned invalid value "
- "(%" PRIi64 ")", r);
- return -1;
- }
- conn->exportsize = (uint64_t) r;
-
- if (compute_eflags (conn, &conn->eflags) < 0)
- return -1;
-
- debug ("newstyle negotiation: flags: export 0x%x", conn->eflags);
- return 0;
-}
-
-static int
-_negotiate_handshake_newstyle_options (struct connection *conn)
-{
- struct new_option new_option;
- size_t nr_options;
- uint64_t version;
- uint32_t option;
- uint32_t optlen;
- char data[MAX_OPTION_LENGTH+1];
- struct new_handshake_finish handshake_finish;
- const char *optname;
-
- for (nr_options = 0; nr_options < MAX_NR_OPTIONS; ++nr_options) {
- if (conn_recv_full (conn, &new_option, sizeof new_option,
- "reading option: conn->recv: %m") == -1)
- return -1;
-
- version = be64toh (new_option.version);
- if (version != NEW_VERSION) {
- nbdkit_error ("unknown option version %" PRIx64
- ", expecting %" PRIx64,
- version, NEW_VERSION);
- return -1;
- }
-
- /* There is a maximum option length we will accept, regardless
- * of the option type.
- */
- optlen = be32toh (new_option.optlen);
- if (optlen > MAX_OPTION_LENGTH) {
- nbdkit_error ("client option data too long (%" PRIu32 ")",
optlen);
- return -1;
- }
-
- option = be32toh (new_option.option);
-
- /* In --tls=require / FORCEDTLS mode the only options allowed
- * before TLS negotiation are NBD_OPT_ABORT and NBD_OPT_STARTTLS.
- */
- if (tls == 2 && !conn->using_tls &&
- !(option == NBD_OPT_ABORT || option == NBD_OPT_STARTTLS)) {
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_TLS_REQD))
- return -1;
- continue;
- }
-
- switch (option) {
- case NBD_OPT_EXPORT_NAME:
- if (conn_recv_full (conn, data, optlen,
- "read: %s: %m", name_of_nbd_opt (option)) == -1)
- return -1;
- /* Apart from printing it, ignore the export name. */
- data[optlen] = '\0';
- debug ("newstyle negotiation: %s: "
- "client requested export '%s' (ignored)",
- name_of_nbd_opt (option), data);
-
- /* We have to finish the handshake by sending handshake_finish. */
- if (finish_newstyle_options (conn) == -1)
- return -1;
-
- memset (&handshake_finish, 0, sizeof handshake_finish);
- handshake_finish.exportsize = htobe64 (conn->exportsize);
- handshake_finish.eflags = htobe16 (conn->eflags);
-
- if (conn->send (conn,
- &handshake_finish,
- (conn->cflags & NBD_FLAG_NO_ZEROES)
- ? offsetof (struct new_handshake_finish, zeroes)
- : sizeof handshake_finish) == -1) {
- nbdkit_error ("write: %m");
- return -1;
- }
- break;
-
- case NBD_OPT_ABORT:
- if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
- return -1;
- debug ("client sent %s to abort the connection",
- name_of_nbd_opt (option));
- return -1;
-
- case NBD_OPT_LIST:
- if (optlen != 0) {
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
- == -1)
- return -1;
- if (conn_recv_full (conn, data, optlen,
- "read: %s: %m", name_of_nbd_opt (option)) == -1)
- return -1;
- continue;
- }
-
- /* Send back the exportname. */
- debug ("newstyle negotiation: %s: advertising export '%s'",
- name_of_nbd_opt (option), exportname);
- if (send_newstyle_option_reply_exportname (conn, option, NBD_REP_SERVER,
- exportname) == -1)
- return -1;
-
- if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
- return -1;
- break;
-
- case NBD_OPT_STARTTLS:
- if (optlen != 0) {
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
- == -1)
- return -1;
- if (conn_recv_full (conn, data, optlen,
- "read: %s: %m", name_of_nbd_opt (option)) == -1)
- return -1;
- continue;
- }
-
- if (tls == 0) { /* --tls=off (NOTLS mode). */
-#ifdef HAVE_GNUTLS
-#define NO_TLS_REPLY NBD_REP_ERR_POLICY
-#else
-#define NO_TLS_REPLY NBD_REP_ERR_UNSUP
-#endif
- if (send_newstyle_option_reply (conn, option, NO_TLS_REPLY) == -1)
- return -1;
- }
- else /* --tls=on or --tls=require */ {
- /* We can't upgrade to TLS twice on the same connection. */
- if (conn->using_tls) {
- if (send_newstyle_option_reply (conn, option,
- NBD_REP_ERR_INVALID) == -1)
- return -1;
- continue;
- }
-
- /* We have to send the (unencrypted) reply before starting
- * the handshake.
- */
- if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
- return -1;
-
- /* Upgrade the connection to TLS. Also performs access control. */
- if (crypto_negotiate_tls (conn, conn->sockin, conn->sockout) == -1)
- return -1;
- conn->using_tls = true;
- debug ("using TLS on this connection");
- }
- break;
-
- case NBD_OPT_INFO:
- case NBD_OPT_GO:
- optname = name_of_nbd_opt (option);
- if (conn_recv_full (conn, data, optlen,
- "read: %s: %m", optname) == -1)
- return -1;
-
- if (optlen < 6) { /* 32 bit export length + 16 bit nr info */
- debug ("newstyle negotiation: %s option length < 6", optname);
-
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
- == -1)
- return -1;
- continue;
- }
-
- {
- uint32_t exportnamelen;
- uint16_t nrinfos;
- uint16_t info;
- size_t i;
- CLEANUP_FREE char *requested_exportname = NULL;
-
- /* Validate the name length and number of INFO requests. */
- memcpy (&exportnamelen, &data[0], 4);
- exportnamelen = be32toh (exportnamelen);
- if (exportnamelen > optlen-6 /* NB optlen >= 6, see above */) {
- debug ("newstyle negotiation: %s: export name too long", optname);
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
- == -1)
- return -1;
- continue;
- }
- memcpy (&nrinfos, &data[exportnamelen+4], 2);
- nrinfos = be16toh (nrinfos);
- if (optlen != 4 + exportnamelen + 2 + 2*nrinfos) {
- debug ("newstyle negotiation: %s: "
- "number of information requests incorrect", optname);
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
- == -1)
- return -1;
- continue;
- }
-
- /* As with NBD_OPT_EXPORT_NAME we print the export name and then
- * ignore it.
- */
- requested_exportname = malloc (exportnamelen+1);
- if (requested_exportname == NULL) {
- nbdkit_error ("malloc: %m");
- return -1;
- }
- memcpy (requested_exportname, &data[4], exportnamelen);
- requested_exportname[exportnamelen] = '\0';
- debug ("newstyle negotiation: %s: "
- "client requested export '%s' (ignored)",
- optname, requested_exportname);
-
- /* The spec is confusing, but it is required that we send back
- * NBD_INFO_EXPORT, even if the client did not request it!
- * qemu client in particular does not request this, but will
- * fail if we don't send it.
- */
- if (finish_newstyle_options (conn) == -1)
- return -1;
-
- if (send_newstyle_option_reply_info_export (conn, option,
- NBD_REP_INFO,
- NBD_INFO_EXPORT) == -1)
- return -1;
-
- /* For now we ignore all other info requests (but we must
- * ignore NBD_INFO_EXPORT if it was requested, because we
- * replied already above). Therefore this loop doesn't do
- * much at the moment.
- */
- for (i = 0; i < nrinfos; ++i) {
- memcpy (&info, &data[4 + exportnamelen + 2 + i*2], 2);
- info = be16toh (info);
- switch (info) {
- case NBD_INFO_EXPORT: /* ignore - reply sent above */ break;
- default:
- debug ("newstyle negotiation: %s: "
- "ignoring NBD_INFO_* request %u (%s)",
- optname, (unsigned) info, name_of_nbd_info (info));
- break;
- }
- }
- }
-
- /* Unlike NBD_OPT_EXPORT_NAME, NBD_OPT_GO sends back an ACK
- * or ERROR packet.
- */
- if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
- return -1;
-
- break;
-
- case NBD_OPT_STRUCTURED_REPLY:
- if (optlen != 0) {
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
- == -1)
- return -1;
- if (conn_recv_full (conn, data, optlen,
- "read: %s: %m", name_of_nbd_opt (option)) == -1)
- return -1;
- continue;
- }
-
- debug ("newstyle negotiation: %s: client requested structured replies",
- name_of_nbd_opt (option));
-
- if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
- return -1;
-
- conn->structured_replies = true;
- break;
-
- case NBD_OPT_LIST_META_CONTEXT:
- case NBD_OPT_SET_META_CONTEXT:
- {
- uint32_t opt_index;
- uint32_t exportnamelen;
- uint32_t nr_queries;
- uint32_t querylen;
- const char *what;
-
- optname = name_of_nbd_opt (option);
- if (conn_recv_full (conn, data, optlen, "read: %s: %m", optname) ==
-1)
- return -1;
-
- if (!conn->structured_replies) {
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
- == -1)
- return -1;
- continue;
- }
-
- /* Minimum length of the option payload is:
- * 32 bit export name length followed by empty export name
- * + 32 bit number of queries followed by no queries
- * = 8 bytes.
- */
- what = "optlen < 8";
- if (optlen < 8) {
- opt_meta_invalid_option_len:
- debug ("newstyle negotiation: %s: invalid option length: %s",
- optname, what);
-
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
- == -1)
- return -1;
- continue;
- }
-
- /* Discard the export name. */
- memcpy (&exportnamelen, &data[0], 4);
- exportnamelen = be32toh (exportnamelen);
- opt_index = 4 + exportnamelen;
-
- /* Read the number of queries. */
- what = "reading number of queries";
- if (opt_index+4 > optlen)
- goto opt_meta_invalid_option_len;
- memcpy (&nr_queries, &data[opt_index], 4);
- nr_queries = be32toh (nr_queries);
- opt_index += 4;
-
- /* for LIST: nr_queries == 0 means return all meta contexts
- * for SET: nr_queries == 0 means reset all contexts
- */
- if (nr_queries == 0) {
- /* Nothing is supported now. */
- if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
- return -1;
- }
- else {
- /* Read and answer each query. */
- while (nr_queries > 0) {
- what = "reading query string length";
- if (opt_index+4 > optlen)
- goto opt_meta_invalid_option_len;
- memcpy (&querylen, &data[opt_index], 4);
- querylen = be32toh (querylen);
- opt_index += 4;
- what = "reading query string";
- if (opt_index + querylen > optlen)
- goto opt_meta_invalid_option_len;
-
- debug ("newstyle negotiation: %s: %s %.*s",
- optname,
- option == NBD_OPT_LIST_META_CONTEXT ? "query" :
"set",
- (int) querylen, &data[opt_index]);
-
- /* Ignore query - nothing is supported. */
-
- opt_index += querylen;
- nr_queries--;
- }
- if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
- return -1;
- }
- }
- break;
-
- default:
- /* Unknown option. */
- if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_UNSUP) == -1)
- return -1;
- if (conn_recv_full (conn, data, optlen,
- "reading unknown option data: conn->recv: %m") ==
-1)
- return -1;
- }
-
- /* Note, since it's not very clear from the protocol doc, that the
- * client must send NBD_OPT_EXPORT_NAME or NBD_OPT_GO last, and
- * that ends option negotiation.
- */
- if (option == NBD_OPT_EXPORT_NAME || option == NBD_OPT_GO)
- break;
- }
-
- if (nr_options >= MAX_NR_OPTIONS) {
- nbdkit_error ("client exceeded maximum number of options (%d)",
- MAX_NR_OPTIONS);
- return -1;
- }
-
- /* In --tls=require / FORCEDTLS mode, we must have upgraded to TLS
- * by the time we finish option negotiation. If not, give up.
- */
- if (tls == 2 && !conn->using_tls) {
- nbdkit_error ("non-TLS client tried to connect in --tls=require mode");
- return -1;
- }
-
- return 0;
-}
-
-static int
-_negotiate_handshake_newstyle (struct connection *conn)
-{
- struct new_handshake handshake;
- uint16_t gflags;
-
- gflags = NBD_FLAG_FIXED_NEWSTYLE | NBD_FLAG_NO_ZEROES;
-
- debug ("newstyle negotiation: flags: global 0x%x", gflags);
-
- memcpy (handshake.nbdmagic, "NBDMAGIC", 8);
- handshake.version = htobe64 (NEW_VERSION);
- handshake.gflags = htobe16 (gflags);
-
- if (conn->send (conn, &handshake, sizeof handshake) == -1) {
- nbdkit_error ("write: %m");
- return -1;
- }
-
- /* Client now sends us its 32 bit flags word ... */
- if (conn_recv_full (conn, &conn->cflags, sizeof conn->cflags,
- "reading initial client flags: conn->recv: %m") ==
-1)
- return -1;
- conn->cflags = be32toh (conn->cflags);
- /* ... which we check for accuracy. */
- debug ("newstyle negotiation: client flags: 0x%x", conn->cflags);
- if (conn->cflags & ~gflags) {
- nbdkit_error ("client requested unknown flags 0x%x", conn->cflags);
- return -1;
- }
-
- /* Receive newstyle options. */
- if (_negotiate_handshake_newstyle_options (conn) == -1)
- return -1;
-
- return 0;
-}
-
-static int
-negotiate_handshake (struct connection *conn)
-{
- int r;
-
- lock_request (conn);
- if (!newstyle)
- r = _negotiate_handshake_oldstyle (conn);
- else
- r = _negotiate_handshake_newstyle (conn);
- unlock_request (conn);
-
- return r;
-}
-
-static bool
-valid_range (struct connection *conn, uint64_t offset, uint32_t count)
-{
- uint64_t exportsize = conn->exportsize;
-
- return count > 0 && offset <= exportsize && offset + count <=
exportsize;
-}
-
-static bool
-validate_request (struct connection *conn,
- uint16_t cmd, uint16_t flags, uint64_t offset, uint32_t count,
- uint32_t *error)
-{
- /* Readonly connection? */
- if (conn->readonly &&
- (cmd == NBD_CMD_WRITE || cmd == NBD_CMD_TRIM ||
- cmd == NBD_CMD_WRITE_ZEROES)) {
- nbdkit_error ("invalid request: %s: write request on readonly connection",
- name_of_nbd_cmd (cmd));
- *error = EROFS;
- return false;
- }
-
- /* Validate cmd, offset, count. */
- switch (cmd) {
- case NBD_CMD_READ:
- case NBD_CMD_WRITE:
- case NBD_CMD_TRIM:
- case NBD_CMD_WRITE_ZEROES:
- if (!valid_range (conn, offset, count)) {
- /* XXX Allow writes to extend the disk? */
- nbdkit_error ("invalid request: %s: offset and count are out of range: "
- "offset=%" PRIu64 " count=%" PRIu32,
- name_of_nbd_cmd (cmd), offset, count);
- *error = (cmd == NBD_CMD_WRITE ||
- cmd == NBD_CMD_WRITE_ZEROES) ? ENOSPC : EINVAL;
- return false;
- }
- break;
-
- case NBD_CMD_FLUSH:
- if (offset != 0 || count != 0) {
- nbdkit_error ("invalid request: %s: expecting offset and count = 0",
- name_of_nbd_cmd (cmd));
- *error = EINVAL;
- return false;
- }
- break;
-
- default:
- nbdkit_error ("invalid request: unknown command (%" PRIu32 ")
ignored",
- cmd);
- *error = EINVAL;
- return false;
- }
-
- /* Validate flags */
- if (flags & ~(NBD_CMD_FLAG_FUA | NBD_CMD_FLAG_NO_HOLE)) {
- nbdkit_error ("invalid request: unknown flag (0x%x)", flags);
- *error = EINVAL;
- return false;
- }
- if ((flags & NBD_CMD_FLAG_NO_HOLE) &&
- cmd != NBD_CMD_WRITE_ZEROES) {
- nbdkit_error ("invalid request: NO_HOLE flag needs WRITE_ZEROES request");
- *error = EINVAL;
- return false;
- }
- if (!conn->can_fua && (flags & NBD_CMD_FLAG_FUA)) {
- nbdkit_error ("invalid request: FUA flag not supported");
- *error = EINVAL;
- return false;
- }
-
- /* Refuse over-large read and write requests. */
- if ((cmd == NBD_CMD_WRITE || cmd == NBD_CMD_READ) &&
- count > MAX_REQUEST_SIZE) {
- nbdkit_error ("invalid request: %s: data request is too large (%" PRIu32
- " > %d)",
- name_of_nbd_cmd (cmd), count, MAX_REQUEST_SIZE);
- *error = ENOMEM;
- return false;
- }
-
- /* Flush allowed? */
- if (!conn->can_flush && cmd == NBD_CMD_FLUSH) {
- nbdkit_error ("invalid request: %s: flush operation not supported",
- name_of_nbd_cmd (cmd));
- *error = EINVAL;
- return false;
- }
-
- /* Trim allowed? */
- if (!conn->can_trim && cmd == NBD_CMD_TRIM) {
- nbdkit_error ("invalid request: %s: trim operation not supported",
- name_of_nbd_cmd (cmd));
- *error = EINVAL;
- return false;
- }
-
- /* Zero allowed? */
- if (!conn->can_zero && cmd == NBD_CMD_WRITE_ZEROES) {
- nbdkit_error ("invalid request: %s: write zeroes operation not supported",
- name_of_nbd_cmd (cmd));
- *error = EINVAL;
- return false;
- }
-
- return true; /* Command validates. */
-}
-
-/* This is called with the request lock held to actually execute the
- * request (by calling the plugin). Note that the request fields have
- * been validated already in 'validate_request' so we don't have to
- * check them again. 'buf' is either the data to be written or the
- * data to be returned, and points to a buffer of size 'count' bytes.
- *
- * In all cases, the return value is the system errno value that will
- * later be converted to the nbd error to send back to the client (0
- * for success).
- */
-static uint32_t
-handle_request (struct connection *conn,
- uint16_t cmd, uint16_t flags, uint64_t offset, uint32_t count,
- void *buf)
-{
- uint32_t f = 0;
- bool fua = conn->can_fua && (flags & NBD_CMD_FLAG_FUA);
- int err = 0;
-
- /* Clear the error, so that we know if the plugin calls
- * nbdkit_set_error() or relied on errno. */
- threadlocal_set_error (0);
-
- switch (cmd) {
- case NBD_CMD_READ:
- if (backend->pread (backend, conn, buf, count, offset, 0, &err) == -1)
- return err;
- break;
-
- case NBD_CMD_WRITE:
- if (fua)
- f |= NBDKIT_FLAG_FUA;
- if (backend->pwrite (backend, conn, buf, count, offset, f, &err) == -1)
- return err;
- break;
-
- case NBD_CMD_FLUSH:
- if (backend->flush (backend, conn, 0, &err) == -1)
- return err;
- break;
-
- case NBD_CMD_TRIM:
- if (fua)
- f |= NBDKIT_FLAG_FUA;
- if (backend->trim (backend, conn, count, offset, f, &err) == -1)
- return err;
- break;
-
- case NBD_CMD_WRITE_ZEROES:
- if (!(flags & NBD_CMD_FLAG_NO_HOLE))
- f |= NBDKIT_FLAG_MAY_TRIM;
- if (fua)
- f |= NBDKIT_FLAG_FUA;
- if (backend->zero (backend, conn, count, offset, f, &err) == -1)
- return err;
- break;
-
- default:
- abort ();
- }
-
- return 0;
-}
-
-static int
-skip_over_write_buffer (int sock, size_t count)
-{
- char buf[BUFSIZ];
- ssize_t r;
-
- if (count > MAX_REQUEST_SIZE * 2) {
- nbdkit_error ("write request too large to skip");
- return -1;
- }
-
- while (count > 0) {
- r = read (sock, buf, count > BUFSIZ ? BUFSIZ : count);
- if (r == -1) {
- nbdkit_error ("skipping write buffer: %m");
- return -1;
- }
- if (r == 0) {
- nbdkit_error ("unexpected early EOF");
- errno = EBADMSG;
- return -1;
- }
- count -= r;
- }
- return 0;
-}
-
-/* Convert a system errno to an NBD_E* error code. */
-static int
-nbd_errno (int error)
-{
- switch (error) {
- case 0:
- return NBD_SUCCESS;
- case EROFS:
- case EPERM:
- return NBD_EPERM;
- case EIO:
- return NBD_EIO;
- case ENOMEM:
- return NBD_ENOMEM;
-#ifdef EDQUOT
- case EDQUOT:
-#endif
- case EFBIG:
- case ENOSPC:
- return NBD_ENOSPC;
-#ifdef ESHUTDOWN
- case ESHUTDOWN:
- return NBD_ESHUTDOWN;
-#endif
- case EINVAL:
- default:
- return NBD_EINVAL;
- }
-}
-
-static int
-send_simple_reply (struct connection *conn,
- uint64_t handle, uint16_t cmd,
- const char *buf, uint32_t count,
- uint32_t error)
-{
- ACQUIRE_LOCK_FOR_CURRENT_SCOPE (&conn->write_lock);
- struct simple_reply reply;
- int r;
-
- reply.magic = htobe32 (NBD_SIMPLE_REPLY_MAGIC);
- reply.handle = handle;
- reply.error = htobe32 (nbd_errno (error));
-
- r = conn->send (conn, &reply, sizeof reply);
- if (r == -1) {
- nbdkit_error ("write reply: %s: %m", name_of_nbd_cmd (cmd));
- return set_status (conn, -1);
- }
-
- /* Send the read data buffer. */
- if (cmd == NBD_CMD_READ && !error) {
- r = conn->send (conn, buf, count);
- if (r == -1) {
- nbdkit_error ("write data: %s: %m", name_of_nbd_cmd (cmd));
- return set_status (conn, -1);
- }
- }
-
- return 1; /* command processed ok */
-}
-
-static int
-send_structured_reply_read (struct connection *conn,
- uint64_t handle, uint16_t cmd,
- const char *buf, uint32_t count, uint64_t offset)
-{
- /* Once we are really using structured replies and sending data back
- * in chunks, we'll be able to grab the write lock for each chunk,
- * allowing other threads to interleave replies. As we're not doing
- * that yet we acquire the lock for the whole function.
- */
- ACQUIRE_LOCK_FOR_CURRENT_SCOPE (&conn->write_lock);
- struct structured_reply reply;
- struct structured_reply_offset_data offset_data;
- int r;
-
- assert (cmd == NBD_CMD_READ);
-
- reply.magic = htobe32 (NBD_STRUCTURED_REPLY_MAGIC);
- reply.handle = handle;
- reply.flags = htobe16 (NBD_REPLY_FLAG_DONE);
- reply.type = htobe16 (NBD_REPLY_TYPE_OFFSET_DATA);
- reply.length = htobe32 (count + sizeof offset_data);
-
- r = conn->send (conn, &reply, sizeof reply);
- if (r == -1) {
- nbdkit_error ("write reply: %s: %m", name_of_nbd_cmd (cmd));
- return set_status (conn, -1);
- }
-
- /* Send the offset + read data buffer. */
- offset_data.offset = htobe64 (offset);
- r = conn->send (conn, &offset_data, sizeof offset_data);
- if (r == -1) {
- nbdkit_error ("write data: %s: %m", name_of_nbd_cmd (cmd));
- return set_status (conn, -1);
- }
-
- r = conn->send (conn, buf, count);
- if (r == -1) {
- nbdkit_error ("write data: %s: %m", name_of_nbd_cmd (cmd));
- return set_status (conn, -1);
- }
-
- return 1; /* command processed ok */
-}
-
-static int
-send_structured_reply_error (struct connection *conn,
- uint64_t handle, uint16_t cmd, uint32_t error)
-{
- ACQUIRE_LOCK_FOR_CURRENT_SCOPE (&conn->write_lock);
- struct structured_reply reply;
- struct structured_reply_error error_data;
- int r;
-
- reply.magic = htobe32 (NBD_STRUCTURED_REPLY_MAGIC);
- reply.handle = handle;
- reply.flags = htobe16 (NBD_REPLY_FLAG_DONE);
- reply.type = htobe16 (NBD_REPLY_TYPE_ERROR);
- reply.length = htobe32 (0 /* no human readable error */ + sizeof error_data);
-
- r = conn->send (conn, &reply, sizeof reply);
- if (r == -1) {
- nbdkit_error ("write error reply: %m");
- return set_status (conn, -1);
- }
-
- /* Send the error. */
- error_data.error = htobe32 (error);
- error_data.len = htobe16 (0);
- r = conn->send (conn, &error_data, sizeof error_data);
- if (r == -1) {
- nbdkit_error ("write data: %s: %m", name_of_nbd_cmd (cmd));
- return set_status (conn, -1);
- }
- /* No human readable error message at the moment. */
-
- return 1; /* command processed ok */
-}
-
-static int
-recv_request_send_reply (struct connection *conn)
-{
- int r;
- struct request request;
- uint16_t cmd, flags;
- uint32_t magic, count, error = 0;
- uint64_t offset;
- CLEANUP_FREE char *buf = NULL;
-
- /* Read the request packet. */
- {
- ACQUIRE_LOCK_FOR_CURRENT_SCOPE (&conn->read_lock);
- r = get_status (conn);
- if (r <= 0)
- return r;
- r = conn->recv (conn, &request, sizeof request);
- if (r == -1) {
- nbdkit_error ("read request: %m");
- return set_status (conn, -1);
- }
- if (r == 0) {
- debug ("client closed input socket, closing connection");
- return set_status (conn, 0); /* disconnect */
- }
-
- magic = be32toh (request.magic);
- if (magic != NBD_REQUEST_MAGIC) {
- nbdkit_error ("invalid request: 'magic' field is incorrect
(0x%x)",
- magic);
- return set_status (conn, -1);
- }
-
- flags = be16toh (request.flags);
- cmd = be16toh (request.type);
-
- offset = be64toh (request.offset);
- count = be32toh (request.count);
-
- if (cmd == NBD_CMD_DISC) {
- debug ("client sent %s, closing connection", name_of_nbd_cmd (cmd));
- return set_status (conn, 0); /* disconnect */
- }
-
- /* Validate the request. */
- if (!validate_request (conn, cmd, flags, offset, count, &error)) {
- if (cmd == NBD_CMD_WRITE &&
- skip_over_write_buffer (conn->sockin, count) < 0)
- return set_status (conn, -1);
- goto send_reply;
- }
-
- /* Allocate the data buffer used for either read or write requests. */
- if (cmd == NBD_CMD_READ || cmd == NBD_CMD_WRITE) {
- buf = malloc (count);
- if (buf == NULL) {
- perror ("malloc");
- error = ENOMEM;
- if (cmd == NBD_CMD_WRITE &&
- skip_over_write_buffer (conn->sockin, count) < 0)
- return set_status (conn, -1);
- goto send_reply;
- }
- }
-
- /* Receive the write data buffer. */
- if (cmd == NBD_CMD_WRITE) {
- r = conn->recv (conn, buf, count);
- if (r == 0) {
- errno = EBADMSG;
- r = -1;
- }
- if (r == -1) {
- nbdkit_error ("read data: %s: %m", name_of_nbd_cmd (cmd));
- return set_status (conn, -1);
- }
- }
- }
-
- /* Perform the request. Only this part happens inside the request lock. */
- if (quit || !get_status (conn)) {
- error = ESHUTDOWN;
- }
- else {
- lock_request (conn);
- error = handle_request (conn, cmd, flags, offset, count, buf);
- assert ((int) error >= 0);
- unlock_request (conn);
- }
-
- /* Send the reply packet. */
- send_reply:
- if (get_status (conn) < 0)
- return -1;
-
- if (error != 0) {
- /* Since we're about to send only the limited NBD_E* errno to the
- * client, don't lose the information about what really happened
- * on the server side. Make sure there is a way for the operator
- * to retrieve the real error.
- */
- debug ("sending error reply: %s", strerror (error));
- }
-
- /* Currently we prefer to send simple replies for everything except
- * where we have to (ie. NBD_CMD_READ when structured_replies have
- * been negotiated). However this prevents us from sending
- * human-readable error messages to the client, so we should
- * reconsider this in future.
- */
- if (conn->structured_replies && cmd == NBD_CMD_READ) {
- if (!error)
- return send_structured_reply_read (conn, request.handle, cmd,
- buf, count, offset);
- else
- return send_structured_reply_error (conn, request.handle, cmd, error);
- }
- else
- return send_simple_reply (conn, request.handle, cmd, buf, count, error);
-}
-
/* Write buffer to conn->sockout and either succeed completely
* (returns 0) or fail (returns -1).
*/
diff --git a/server/protocol-handshake-newstyle.c b/server/protocol-handshake-newstyle.c
new file mode 100644
index 0000000..db01f7b
--- /dev/null
+++ b/server/protocol-handshake-newstyle.c
@@ -0,0 +1,609 @@
+/* nbdkit
+ * Copyright (C) 2013-2019 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "internal.h"
+#include "byte-swapping.h"
+#include "protocol.h"
+
+/* Maximum number of client options we allow before giving up. */
+#define MAX_NR_OPTIONS 32
+
+/* Maximum length of any option data (bytes). */
+#define MAX_OPTION_LENGTH 4096
+
+/* Receive newstyle options. */
+static int
+send_newstyle_option_reply (struct connection *conn,
+ uint32_t option, uint32_t reply)
+{
+ struct fixed_new_option_reply fixed_new_option_reply;
+
+ fixed_new_option_reply.magic = htobe64 (NBD_REP_MAGIC);
+ fixed_new_option_reply.option = htobe32 (option);
+ fixed_new_option_reply.reply = htobe32 (reply);
+ fixed_new_option_reply.replylen = htobe32 (0);
+
+ if (conn->send (conn,
+ &fixed_new_option_reply,
+ sizeof fixed_new_option_reply) == -1) {
+ nbdkit_error ("write: %m");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+send_newstyle_option_reply_exportname (struct connection *conn,
+ uint32_t option, uint32_t reply,
+ const char *exportname)
+{
+ struct fixed_new_option_reply fixed_new_option_reply;
+ size_t name_len = strlen (exportname);
+ uint32_t len;
+
+ fixed_new_option_reply.magic = htobe64 (NBD_REP_MAGIC);
+ fixed_new_option_reply.option = htobe32 (option);
+ fixed_new_option_reply.reply = htobe32 (reply);
+ fixed_new_option_reply.replylen = htobe32 (name_len + sizeof (len));
+
+ if (conn->send (conn,
+ &fixed_new_option_reply,
+ sizeof fixed_new_option_reply) == -1) {
+ nbdkit_error ("write: %m");
+ return -1;
+ }
+
+ len = htobe32 (name_len);
+ if (conn->send (conn, &len, sizeof len) == -1) {
+ nbdkit_error ("write: %m");
+ return -1;
+ }
+ if (conn->send (conn, exportname, name_len) == -1) {
+ nbdkit_error ("write: %m");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+send_newstyle_option_reply_info_export (struct connection *conn,
+ uint32_t option, uint32_t reply,
+ uint16_t info)
+{
+ struct fixed_new_option_reply fixed_new_option_reply;
+ struct fixed_new_option_reply_info_export export;
+
+ fixed_new_option_reply.magic = htobe64 (NBD_REP_MAGIC);
+ fixed_new_option_reply.option = htobe32 (option);
+ fixed_new_option_reply.reply = htobe32 (reply);
+ fixed_new_option_reply.replylen = htobe32 (sizeof export);
+ export.info = htobe16 (info);
+ export.exportsize = htobe64 (conn->exportsize);
+ export.eflags = htobe16 (conn->eflags);
+
+ if (conn->send (conn,
+ &fixed_new_option_reply,
+ sizeof fixed_new_option_reply) == -1 ||
+ conn->send (conn, &export, sizeof export) == -1) {
+ nbdkit_error ("write: %m");
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Sub-function during negotiate_handshake_newstyle, to uniformly handle
+ * a client hanging up on a message boundary.
+ */
+static int __attribute__ ((format (printf, 4, 5)))
+conn_recv_full (struct connection *conn, void *buf, size_t len,
+ const char *fmt, ...)
+{
+ int r = conn->recv (conn, buf, len);
+ va_list args;
+
+ if (r == -1) {
+ va_start (args, fmt);
+ nbdkit_verror (fmt, args);
+ va_end (args);
+ return -1;
+ }
+ if (r == 0) {
+ /* During negotiation, client EOF on message boundary is less
+ * severe than failure in the middle of the buffer. */
+ debug ("client closed input socket, closing connection");
+ return -1;
+ }
+ return r;
+}
+
+/* Sub-function of negotiate_handshake_newstyle_options below. It
+ * must be called on all non-error paths out of the options for-loop
+ * in that function.
+ */
+static int
+finish_newstyle_options (struct connection *conn)
+{
+ int64_t r;
+
+ r = backend->get_size (backend, conn);
+ if (r == -1)
+ return -1;
+ if (r < 0) {
+ nbdkit_error (".get_size function returned invalid value "
+ "(%" PRIi64 ")", r);
+ return -1;
+ }
+ conn->exportsize = (uint64_t) r;
+
+ if (protocol_compute_eflags (conn, &conn->eflags) < 0)
+ return -1;
+
+ debug ("newstyle negotiation: flags: export 0x%x", conn->eflags);
+ return 0;
+}
+
+static int
+negotiate_handshake_newstyle_options (struct connection *conn)
+{
+ struct new_option new_option;
+ size_t nr_options;
+ uint64_t version;
+ uint32_t option;
+ uint32_t optlen;
+ char data[MAX_OPTION_LENGTH+1];
+ struct new_handshake_finish handshake_finish;
+ const char *optname;
+
+ for (nr_options = 0; nr_options < MAX_NR_OPTIONS; ++nr_options) {
+ if (conn_recv_full (conn, &new_option, sizeof new_option,
+ "reading option: conn->recv: %m") == -1)
+ return -1;
+
+ version = be64toh (new_option.version);
+ if (version != NEW_VERSION) {
+ nbdkit_error ("unknown option version %" PRIx64
+ ", expecting %" PRIx64,
+ version, NEW_VERSION);
+ return -1;
+ }
+
+ /* There is a maximum option length we will accept, regardless
+ * of the option type.
+ */
+ optlen = be32toh (new_option.optlen);
+ if (optlen > MAX_OPTION_LENGTH) {
+ nbdkit_error ("client option data too long (%" PRIu32 ")",
optlen);
+ return -1;
+ }
+
+ option = be32toh (new_option.option);
+
+ /* In --tls=require / FORCEDTLS mode the only options allowed
+ * before TLS negotiation are NBD_OPT_ABORT and NBD_OPT_STARTTLS.
+ */
+ if (tls == 2 && !conn->using_tls &&
+ !(option == NBD_OPT_ABORT || option == NBD_OPT_STARTTLS)) {
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_TLS_REQD))
+ return -1;
+ continue;
+ }
+
+ switch (option) {
+ case NBD_OPT_EXPORT_NAME:
+ if (conn_recv_full (conn, data, optlen,
+ "read: %s: %m", name_of_nbd_opt (option)) == -1)
+ return -1;
+ /* Apart from printing it, ignore the export name. */
+ data[optlen] = '\0';
+ debug ("newstyle negotiation: %s: "
+ "client requested export '%s' (ignored)",
+ name_of_nbd_opt (option), data);
+
+ /* We have to finish the handshake by sending handshake_finish. */
+ if (finish_newstyle_options (conn) == -1)
+ return -1;
+
+ memset (&handshake_finish, 0, sizeof handshake_finish);
+ handshake_finish.exportsize = htobe64 (conn->exportsize);
+ handshake_finish.eflags = htobe16 (conn->eflags);
+
+ if (conn->send (conn,
+ &handshake_finish,
+ (conn->cflags & NBD_FLAG_NO_ZEROES)
+ ? offsetof (struct new_handshake_finish, zeroes)
+ : sizeof handshake_finish) == -1) {
+ nbdkit_error ("write: %m");
+ return -1;
+ }
+ break;
+
+ case NBD_OPT_ABORT:
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
+ return -1;
+ debug ("client sent %s to abort the connection",
+ name_of_nbd_opt (option));
+ return -1;
+
+ case NBD_OPT_LIST:
+ if (optlen != 0) {
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
+ == -1)
+ return -1;
+ if (conn_recv_full (conn, data, optlen,
+ "read: %s: %m", name_of_nbd_opt (option)) == -1)
+ return -1;
+ continue;
+ }
+
+ /* Send back the exportname. */
+ debug ("newstyle negotiation: %s: advertising export '%s'",
+ name_of_nbd_opt (option), exportname);
+ if (send_newstyle_option_reply_exportname (conn, option, NBD_REP_SERVER,
+ exportname) == -1)
+ return -1;
+
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
+ return -1;
+ break;
+
+ case NBD_OPT_STARTTLS:
+ if (optlen != 0) {
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
+ == -1)
+ return -1;
+ if (conn_recv_full (conn, data, optlen,
+ "read: %s: %m", name_of_nbd_opt (option)) == -1)
+ return -1;
+ continue;
+ }
+
+ if (tls == 0) { /* --tls=off (NOTLS mode). */
+#ifdef HAVE_GNUTLS
+#define NO_TLS_REPLY NBD_REP_ERR_POLICY
+#else
+#define NO_TLS_REPLY NBD_REP_ERR_UNSUP
+#endif
+ if (send_newstyle_option_reply (conn, option, NO_TLS_REPLY) == -1)
+ return -1;
+ }
+ else /* --tls=on or --tls=require */ {
+ /* We can't upgrade to TLS twice on the same connection. */
+ if (conn->using_tls) {
+ if (send_newstyle_option_reply (conn, option,
+ NBD_REP_ERR_INVALID) == -1)
+ return -1;
+ continue;
+ }
+
+ /* We have to send the (unencrypted) reply before starting
+ * the handshake.
+ */
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
+ return -1;
+
+ /* Upgrade the connection to TLS. Also performs access control. */
+ if (crypto_negotiate_tls (conn, conn->sockin, conn->sockout) == -1)
+ return -1;
+ conn->using_tls = true;
+ debug ("using TLS on this connection");
+ }
+ break;
+
+ case NBD_OPT_INFO:
+ case NBD_OPT_GO:
+ optname = name_of_nbd_opt (option);
+ if (conn_recv_full (conn, data, optlen,
+ "read: %s: %m", optname) == -1)
+ return -1;
+
+ if (optlen < 6) { /* 32 bit export length + 16 bit nr info */
+ debug ("newstyle negotiation: %s option length < 6", optname);
+
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
+ == -1)
+ return -1;
+ continue;
+ }
+
+ {
+ uint32_t exportnamelen;
+ uint16_t nrinfos;
+ uint16_t info;
+ size_t i;
+ CLEANUP_FREE char *requested_exportname = NULL;
+
+ /* Validate the name length and number of INFO requests. */
+ memcpy (&exportnamelen, &data[0], 4);
+ exportnamelen = be32toh (exportnamelen);
+ if (exportnamelen > optlen-6 /* NB optlen >= 6, see above */) {
+ debug ("newstyle negotiation: %s: export name too long", optname);
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
+ == -1)
+ return -1;
+ continue;
+ }
+ memcpy (&nrinfos, &data[exportnamelen+4], 2);
+ nrinfos = be16toh (nrinfos);
+ if (optlen != 4 + exportnamelen + 2 + 2*nrinfos) {
+ debug ("newstyle negotiation: %s: "
+ "number of information requests incorrect", optname);
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
+ == -1)
+ return -1;
+ continue;
+ }
+
+ /* As with NBD_OPT_EXPORT_NAME we print the export name and then
+ * ignore it.
+ */
+ requested_exportname = malloc (exportnamelen+1);
+ if (requested_exportname == NULL) {
+ nbdkit_error ("malloc: %m");
+ return -1;
+ }
+ memcpy (requested_exportname, &data[4], exportnamelen);
+ requested_exportname[exportnamelen] = '\0';
+ debug ("newstyle negotiation: %s: "
+ "client requested export '%s' (ignored)",
+ optname, requested_exportname);
+
+ /* The spec is confusing, but it is required that we send back
+ * NBD_INFO_EXPORT, even if the client did not request it!
+ * qemu client in particular does not request this, but will
+ * fail if we don't send it.
+ */
+ if (finish_newstyle_options (conn) == -1)
+ return -1;
+
+ if (send_newstyle_option_reply_info_export (conn, option,
+ NBD_REP_INFO,
+ NBD_INFO_EXPORT) == -1)
+ return -1;
+
+ /* For now we ignore all other info requests (but we must
+ * ignore NBD_INFO_EXPORT if it was requested, because we
+ * replied already above). Therefore this loop doesn't do
+ * much at the moment.
+ */
+ for (i = 0; i < nrinfos; ++i) {
+ memcpy (&info, &data[4 + exportnamelen + 2 + i*2], 2);
+ info = be16toh (info);
+ switch (info) {
+ case NBD_INFO_EXPORT: /* ignore - reply sent above */ break;
+ default:
+ debug ("newstyle negotiation: %s: "
+ "ignoring NBD_INFO_* request %u (%s)",
+ optname, (unsigned) info, name_of_nbd_info (info));
+ break;
+ }
+ }
+ }
+
+ /* Unlike NBD_OPT_EXPORT_NAME, NBD_OPT_GO sends back an ACK
+ * or ERROR packet.
+ */
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
+ return -1;
+
+ break;
+
+ case NBD_OPT_STRUCTURED_REPLY:
+ if (optlen != 0) {
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
+ == -1)
+ return -1;
+ if (conn_recv_full (conn, data, optlen,
+ "read: %s: %m", name_of_nbd_opt (option)) == -1)
+ return -1;
+ continue;
+ }
+
+ debug ("newstyle negotiation: %s: client requested structured replies",
+ name_of_nbd_opt (option));
+
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
+ return -1;
+
+ conn->structured_replies = true;
+ break;
+
+ case NBD_OPT_LIST_META_CONTEXT:
+ case NBD_OPT_SET_META_CONTEXT:
+ {
+ uint32_t opt_index;
+ uint32_t exportnamelen;
+ uint32_t nr_queries;
+ uint32_t querylen;
+ const char *what;
+
+ optname = name_of_nbd_opt (option);
+ if (conn_recv_full (conn, data, optlen, "read: %s: %m", optname) ==
-1)
+ return -1;
+
+ if (!conn->structured_replies) {
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
+ == -1)
+ return -1;
+ continue;
+ }
+
+ /* Minimum length of the option payload is:
+ * 32 bit export name length followed by empty export name
+ * + 32 bit number of queries followed by no queries
+ * = 8 bytes.
+ */
+ what = "optlen < 8";
+ if (optlen < 8) {
+ opt_meta_invalid_option_len:
+ debug ("newstyle negotiation: %s: invalid option length: %s",
+ optname, what);
+
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_INVALID)
+ == -1)
+ return -1;
+ continue;
+ }
+
+ /* Discard the export name. */
+ memcpy (&exportnamelen, &data[0], 4);
+ exportnamelen = be32toh (exportnamelen);
+ opt_index = 4 + exportnamelen;
+
+ /* Read the number of queries. */
+ what = "reading number of queries";
+ if (opt_index+4 > optlen)
+ goto opt_meta_invalid_option_len;
+ memcpy (&nr_queries, &data[opt_index], 4);
+ nr_queries = be32toh (nr_queries);
+ opt_index += 4;
+
+ /* for LIST: nr_queries == 0 means return all meta contexts
+ * for SET: nr_queries == 0 means reset all contexts
+ */
+ if (nr_queries == 0) {
+ /* Nothing is supported now. */
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
+ return -1;
+ }
+ else {
+ /* Read and answer each query. */
+ while (nr_queries > 0) {
+ what = "reading query string length";
+ if (opt_index+4 > optlen)
+ goto opt_meta_invalid_option_len;
+ memcpy (&querylen, &data[opt_index], 4);
+ querylen = be32toh (querylen);
+ opt_index += 4;
+ what = "reading query string";
+ if (opt_index + querylen > optlen)
+ goto opt_meta_invalid_option_len;
+
+ debug ("newstyle negotiation: %s: %s %.*s",
+ optname,
+ option == NBD_OPT_LIST_META_CONTEXT ? "query" :
"set",
+ (int) querylen, &data[opt_index]);
+
+ /* Ignore query - nothing is supported. */
+
+ opt_index += querylen;
+ nr_queries--;
+ }
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ACK) == -1)
+ return -1;
+ }
+ }
+ break;
+
+ default:
+ /* Unknown option. */
+ if (send_newstyle_option_reply (conn, option, NBD_REP_ERR_UNSUP) == -1)
+ return -1;
+ if (conn_recv_full (conn, data, optlen,
+ "reading unknown option data: conn->recv: %m") ==
-1)
+ return -1;
+ }
+
+ /* Note, since it's not very clear from the protocol doc, that the
+ * client must send NBD_OPT_EXPORT_NAME or NBD_OPT_GO last, and
+ * that ends option negotiation.
+ */
+ if (option == NBD_OPT_EXPORT_NAME || option == NBD_OPT_GO)
+ break;
+ }
+
+ if (nr_options >= MAX_NR_OPTIONS) {
+ nbdkit_error ("client exceeded maximum number of options (%d)",
+ MAX_NR_OPTIONS);
+ return -1;
+ }
+
+ /* In --tls=require / FORCEDTLS mode, we must have upgraded to TLS
+ * by the time we finish option negotiation. If not, give up.
+ */
+ if (tls == 2 && !conn->using_tls) {
+ nbdkit_error ("non-TLS client tried to connect in --tls=require mode");
+ return -1;
+ }
+
+ return 0;
+}
+
+int
+protocol_handshake_newstyle (struct connection *conn)
+{
+ struct new_handshake handshake;
+ uint16_t gflags;
+
+ gflags = NBD_FLAG_FIXED_NEWSTYLE | NBD_FLAG_NO_ZEROES;
+
+ debug ("newstyle negotiation: flags: global 0x%x", gflags);
+
+ memcpy (handshake.nbdmagic, "NBDMAGIC", 8);
+ handshake.version = htobe64 (NEW_VERSION);
+ handshake.gflags = htobe16 (gflags);
+
+ if (conn->send (conn, &handshake, sizeof handshake) == -1) {
+ nbdkit_error ("write: %m");
+ return -1;
+ }
+
+ /* Client now sends us its 32 bit flags word ... */
+ if (conn_recv_full (conn, &conn->cflags, sizeof conn->cflags,
+ "reading initial client flags: conn->recv: %m") ==
-1)
+ return -1;
+ conn->cflags = be32toh (conn->cflags);
+ /* ... which we check for accuracy. */
+ debug ("newstyle negotiation: client flags: 0x%x", conn->cflags);
+ if (conn->cflags & ~gflags) {
+ nbdkit_error ("client requested unknown flags 0x%x", conn->cflags);
+ return -1;
+ }
+
+ /* Receive newstyle options. */
+ if (negotiate_handshake_newstyle_options (conn) == -1)
+ return -1;
+
+ return 0;
+}
diff --git a/server/protocol-handshake-oldstyle.c b/server/protocol-handshake-oldstyle.c
new file mode 100644
index 0000000..c5dd256
--- /dev/null
+++ b/server/protocol-handshake-oldstyle.c
@@ -0,0 +1,94 @@
+/* nbdkit
+ * Copyright (C) 2013-2019 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "internal.h"
+#include "byte-swapping.h"
+#include "protocol.h"
+
+int
+protocol_handshake_oldstyle (struct connection *conn)
+{
+ struct old_handshake handshake;
+ int64_t r;
+ uint64_t exportsize;
+ uint16_t gflags, eflags;
+
+ /* In --tls=require / FORCEDTLS mode, old style handshakes are
+ * rejected because they cannot support TLS.
+ */
+ if (tls == 2) {
+ nbdkit_error ("non-TLS client tried to connect in --tls=require mode");
+ return -1;
+ }
+
+ r = backend->get_size (backend, conn);
+ if (r == -1)
+ return -1;
+ if (r < 0) {
+ nbdkit_error (".get_size function returned invalid value "
+ "(%" PRIi64 ")", r);
+ return -1;
+ }
+ exportsize = (uint64_t) r;
+ conn->exportsize = exportsize;
+
+ gflags = 0;
+ if (protocol_compute_eflags (conn, &eflags) < 0)
+ return -1;
+
+ debug ("oldstyle negotiation: flags: global 0x%x export 0x%x",
+ gflags, eflags);
+
+ memset (&handshake, 0, sizeof handshake);
+ memcpy (handshake.nbdmagic, "NBDMAGIC", 8);
+ handshake.version = htobe64 (OLD_VERSION);
+ handshake.exportsize = htobe64 (exportsize);
+ handshake.gflags = htobe16 (gflags);
+ handshake.eflags = htobe16 (eflags);
+
+ if (conn->send (conn, &handshake, sizeof handshake) == -1) {
+ nbdkit_error ("write: %m");
+ return -1;
+ }
+
+ return 0;
+}
diff --git a/server/protocol-handshake.c b/server/protocol-handshake.c
new file mode 100644
index 0000000..79a5999
--- /dev/null
+++ b/server/protocol-handshake.c
@@ -0,0 +1,130 @@
+/* nbdkit
+ * Copyright (C) 2013-2019 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "internal.h"
+#include "byte-swapping.h"
+#include "protocol.h"
+
+/* eflags calculation is the same between oldstyle and newstyle
+ * protocols.
+ */
+int
+protocol_compute_eflags (struct connection *conn, uint16_t *flags)
+{
+ uint16_t eflags = NBD_FLAG_HAS_FLAGS;
+ int fl;
+
+ fl = backend->can_write (backend, conn);
+ if (fl == -1)
+ return -1;
+ if (readonly || !fl) {
+ eflags |= NBD_FLAG_READ_ONLY;
+ conn->readonly = true;
+ }
+ if (!conn->readonly) {
+ fl = backend->can_zero (backend, conn);
+ if (fl == -1)
+ return -1;
+ if (fl) {
+ eflags |= NBD_FLAG_SEND_WRITE_ZEROES;
+ conn->can_zero = true;
+ }
+
+ fl = backend->can_trim (backend, conn);
+ if (fl == -1)
+ return -1;
+ if (fl) {
+ eflags |= NBD_FLAG_SEND_TRIM;
+ conn->can_trim = true;
+ }
+
+ fl = backend->can_fua (backend, conn);
+ if (fl == -1)
+ return -1;
+ if (fl) {
+ eflags |= NBD_FLAG_SEND_FUA;
+ conn->can_fua = true;
+ }
+ }
+
+ fl = backend->can_flush (backend, conn);
+ if (fl == -1)
+ return -1;
+ if (fl) {
+ eflags |= NBD_FLAG_SEND_FLUSH;
+ conn->can_flush = true;
+ }
+
+ fl = backend->is_rotational (backend, conn);
+ if (fl == -1)
+ return -1;
+ if (fl) {
+ eflags |= NBD_FLAG_ROTATIONAL;
+ conn->is_rotational = true;
+ }
+
+ fl = backend->can_multi_conn (backend, conn);
+ if (fl == -1)
+ return -1;
+ if (fl) {
+ eflags |= NBD_FLAG_CAN_MULTI_CONN;
+ conn->can_multi_conn = true;
+ }
+
+ *flags = eflags;
+ return 0;
+}
+
+int
+protocol_handshake (struct connection *conn)
+{
+ int r;
+
+ lock_request (conn);
+ if (!newstyle)
+ r = protocol_handshake_oldstyle (conn);
+ else
+ r = protocol_handshake_newstyle (conn);
+ unlock_request (conn);
+
+ return r;
+}
diff --git a/server/protocol.c b/server/protocol.c
new file mode 100644
index 0000000..f117d42
--- /dev/null
+++ b/server/protocol.c
@@ -0,0 +1,515 @@
+/* nbdkit
+ * Copyright (C) 2013-2019 Red Hat Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Red Hat nor the names of its contributors may be
+ * used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <config.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <assert.h>
+
+#include "internal.h"
+#include "byte-swapping.h"
+#include "protocol.h"
+
+/* Maximum read or write request that we will handle. */
+#define MAX_REQUEST_SIZE (64 * 1024 * 1024)
+
+static bool
+valid_range (struct connection *conn, uint64_t offset, uint32_t count)
+{
+ uint64_t exportsize = conn->exportsize;
+
+ return count > 0 && offset <= exportsize && offset + count <=
exportsize;
+}
+
+static bool
+validate_request (struct connection *conn,
+ uint16_t cmd, uint16_t flags, uint64_t offset, uint32_t count,
+ uint32_t *error)
+{
+ /* Readonly connection? */
+ if (conn->readonly &&
+ (cmd == NBD_CMD_WRITE || cmd == NBD_CMD_TRIM ||
+ cmd == NBD_CMD_WRITE_ZEROES)) {
+ nbdkit_error ("invalid request: %s: write request on readonly connection",
+ name_of_nbd_cmd (cmd));
+ *error = EROFS;
+ return false;
+ }
+
+ /* Validate cmd, offset, count. */
+ switch (cmd) {
+ case NBD_CMD_READ:
+ case NBD_CMD_WRITE:
+ case NBD_CMD_TRIM:
+ case NBD_CMD_WRITE_ZEROES:
+ if (!valid_range (conn, offset, count)) {
+ /* XXX Allow writes to extend the disk? */
+ nbdkit_error ("invalid request: %s: offset and count are out of range: "
+ "offset=%" PRIu64 " count=%" PRIu32,
+ name_of_nbd_cmd (cmd), offset, count);
+ *error = (cmd == NBD_CMD_WRITE ||
+ cmd == NBD_CMD_WRITE_ZEROES) ? ENOSPC : EINVAL;
+ return false;
+ }
+ break;
+
+ case NBD_CMD_FLUSH:
+ if (offset != 0 || count != 0) {
+ nbdkit_error ("invalid request: %s: expecting offset and count = 0",
+ name_of_nbd_cmd (cmd));
+ *error = EINVAL;
+ return false;
+ }
+ break;
+
+ default:
+ nbdkit_error ("invalid request: unknown command (%" PRIu32 ")
ignored",
+ cmd);
+ *error = EINVAL;
+ return false;
+ }
+
+ /* Validate flags */
+ if (flags & ~(NBD_CMD_FLAG_FUA | NBD_CMD_FLAG_NO_HOLE)) {
+ nbdkit_error ("invalid request: unknown flag (0x%x)", flags);
+ *error = EINVAL;
+ return false;
+ }
+ if ((flags & NBD_CMD_FLAG_NO_HOLE) &&
+ cmd != NBD_CMD_WRITE_ZEROES) {
+ nbdkit_error ("invalid request: NO_HOLE flag needs WRITE_ZEROES request");
+ *error = EINVAL;
+ return false;
+ }
+ if (!conn->can_fua && (flags & NBD_CMD_FLAG_FUA)) {
+ nbdkit_error ("invalid request: FUA flag not supported");
+ *error = EINVAL;
+ return false;
+ }
+
+ /* Refuse over-large read and write requests. */
+ if ((cmd == NBD_CMD_WRITE || cmd == NBD_CMD_READ) &&
+ count > MAX_REQUEST_SIZE) {
+ nbdkit_error ("invalid request: %s: data request is too large (%" PRIu32
+ " > %d)",
+ name_of_nbd_cmd (cmd), count, MAX_REQUEST_SIZE);
+ *error = ENOMEM;
+ return false;
+ }
+
+ /* Flush allowed? */
+ if (!conn->can_flush && cmd == NBD_CMD_FLUSH) {
+ nbdkit_error ("invalid request: %s: flush operation not supported",
+ name_of_nbd_cmd (cmd));
+ *error = EINVAL;
+ return false;
+ }
+
+ /* Trim allowed? */
+ if (!conn->can_trim && cmd == NBD_CMD_TRIM) {
+ nbdkit_error ("invalid request: %s: trim operation not supported",
+ name_of_nbd_cmd (cmd));
+ *error = EINVAL;
+ return false;
+ }
+
+ /* Zero allowed? */
+ if (!conn->can_zero && cmd == NBD_CMD_WRITE_ZEROES) {
+ nbdkit_error ("invalid request: %s: write zeroes operation not supported",
+ name_of_nbd_cmd (cmd));
+ *error = EINVAL;
+ return false;
+ }
+
+ return true; /* Command validates. */
+}
+
+/* This is called with the request lock held to actually execute the
+ * request (by calling the plugin). Note that the request fields have
+ * been validated already in 'validate_request' so we don't have to
+ * check them again. 'buf' is either the data to be written or the
+ * data to be returned, and points to a buffer of size 'count' bytes.
+ *
+ * In all cases, the return value is the system errno value that will
+ * later be converted to the nbd error to send back to the client (0
+ * for success).
+ */
+static uint32_t
+handle_request (struct connection *conn,
+ uint16_t cmd, uint16_t flags, uint64_t offset, uint32_t count,
+ void *buf)
+{
+ uint32_t f = 0;
+ bool fua = conn->can_fua && (flags & NBD_CMD_FLAG_FUA);
+ int err = 0;
+
+ /* Clear the error, so that we know if the plugin calls
+ * nbdkit_set_error() or relied on errno. */
+ threadlocal_set_error (0);
+
+ switch (cmd) {
+ case NBD_CMD_READ:
+ if (backend->pread (backend, conn, buf, count, offset, 0, &err) == -1)
+ return err;
+ break;
+
+ case NBD_CMD_WRITE:
+ if (fua)
+ f |= NBDKIT_FLAG_FUA;
+ if (backend->pwrite (backend, conn, buf, count, offset, f, &err) == -1)
+ return err;
+ break;
+
+ case NBD_CMD_FLUSH:
+ if (backend->flush (backend, conn, 0, &err) == -1)
+ return err;
+ break;
+
+ case NBD_CMD_TRIM:
+ if (fua)
+ f |= NBDKIT_FLAG_FUA;
+ if (backend->trim (backend, conn, count, offset, f, &err) == -1)
+ return err;
+ break;
+
+ case NBD_CMD_WRITE_ZEROES:
+ if (!(flags & NBD_CMD_FLAG_NO_HOLE))
+ f |= NBDKIT_FLAG_MAY_TRIM;
+ if (fua)
+ f |= NBDKIT_FLAG_FUA;
+ if (backend->zero (backend, conn, count, offset, f, &err) == -1)
+ return err;
+ break;
+
+ default:
+ abort ();
+ }
+
+ return 0;
+}
+
+static int
+skip_over_write_buffer (int sock, size_t count)
+{
+ char buf[BUFSIZ];
+ ssize_t r;
+
+ if (count > MAX_REQUEST_SIZE * 2) {
+ nbdkit_error ("write request too large to skip");
+ return -1;
+ }
+
+ while (count > 0) {
+ r = read (sock, buf, count > BUFSIZ ? BUFSIZ : count);
+ if (r == -1) {
+ nbdkit_error ("skipping write buffer: %m");
+ return -1;
+ }
+ if (r == 0) {
+ nbdkit_error ("unexpected early EOF");
+ errno = EBADMSG;
+ return -1;
+ }
+ count -= r;
+ }
+ return 0;
+}
+
+/* Convert a system errno to an NBD_E* error code. */
+static int
+nbd_errno (int error)
+{
+ switch (error) {
+ case 0:
+ return NBD_SUCCESS;
+ case EROFS:
+ case EPERM:
+ return NBD_EPERM;
+ case EIO:
+ return NBD_EIO;
+ case ENOMEM:
+ return NBD_ENOMEM;
+#ifdef EDQUOT
+ case EDQUOT:
+#endif
+ case EFBIG:
+ case ENOSPC:
+ return NBD_ENOSPC;
+#ifdef ESHUTDOWN
+ case ESHUTDOWN:
+ return NBD_ESHUTDOWN;
+#endif
+ case EINVAL:
+ default:
+ return NBD_EINVAL;
+ }
+}
+
+static int
+send_simple_reply (struct connection *conn,
+ uint64_t handle, uint16_t cmd,
+ const char *buf, uint32_t count,
+ uint32_t error)
+{
+ ACQUIRE_LOCK_FOR_CURRENT_SCOPE (&conn->write_lock);
+ struct simple_reply reply;
+ int r;
+
+ reply.magic = htobe32 (NBD_SIMPLE_REPLY_MAGIC);
+ reply.handle = handle;
+ reply.error = htobe32 (nbd_errno (error));
+
+ r = conn->send (conn, &reply, sizeof reply);
+ if (r == -1) {
+ nbdkit_error ("write reply: %s: %m", name_of_nbd_cmd (cmd));
+ return connection_set_status (conn, -1);
+ }
+
+ /* Send the read data buffer. */
+ if (cmd == NBD_CMD_READ && !error) {
+ r = conn->send (conn, buf, count);
+ if (r == -1) {
+ nbdkit_error ("write data: %s: %m", name_of_nbd_cmd (cmd));
+ return connection_set_status (conn, -1);
+ }
+ }
+
+ return 1; /* command processed ok */
+}
+
+static int
+send_structured_reply_read (struct connection *conn,
+ uint64_t handle, uint16_t cmd,
+ const char *buf, uint32_t count, uint64_t offset)
+{
+ /* Once we are really using structured replies and sending data back
+ * in chunks, we'll be able to grab the write lock for each chunk,
+ * allowing other threads to interleave replies. As we're not doing
+ * that yet we acquire the lock for the whole function.
+ */
+ ACQUIRE_LOCK_FOR_CURRENT_SCOPE (&conn->write_lock);
+ struct structured_reply reply;
+ struct structured_reply_offset_data offset_data;
+ int r;
+
+ assert (cmd == NBD_CMD_READ);
+
+ reply.magic = htobe32 (NBD_STRUCTURED_REPLY_MAGIC);
+ reply.handle = handle;
+ reply.flags = htobe16 (NBD_REPLY_FLAG_DONE);
+ reply.type = htobe16 (NBD_REPLY_TYPE_OFFSET_DATA);
+ reply.length = htobe32 (count + sizeof offset_data);
+
+ r = conn->send (conn, &reply, sizeof reply);
+ if (r == -1) {
+ nbdkit_error ("write reply: %s: %m", name_of_nbd_cmd (cmd));
+ return connection_set_status (conn, -1);
+ }
+
+ /* Send the offset + read data buffer. */
+ offset_data.offset = htobe64 (offset);
+ r = conn->send (conn, &offset_data, sizeof offset_data);
+ if (r == -1) {
+ nbdkit_error ("write data: %s: %m", name_of_nbd_cmd (cmd));
+ return connection_set_status (conn, -1);
+ }
+
+ r = conn->send (conn, buf, count);
+ if (r == -1) {
+ nbdkit_error ("write data: %s: %m", name_of_nbd_cmd (cmd));
+ return connection_set_status (conn, -1);
+ }
+
+ return 1; /* command processed ok */
+}
+
+static int
+send_structured_reply_error (struct connection *conn,
+ uint64_t handle, uint16_t cmd, uint32_t error)
+{
+ ACQUIRE_LOCK_FOR_CURRENT_SCOPE (&conn->write_lock);
+ struct structured_reply reply;
+ struct structured_reply_error error_data;
+ int r;
+
+ reply.magic = htobe32 (NBD_STRUCTURED_REPLY_MAGIC);
+ reply.handle = handle;
+ reply.flags = htobe16 (NBD_REPLY_FLAG_DONE);
+ reply.type = htobe16 (NBD_REPLY_TYPE_ERROR);
+ reply.length = htobe32 (0 /* no human readable error */ + sizeof error_data);
+
+ r = conn->send (conn, &reply, sizeof reply);
+ if (r == -1) {
+ nbdkit_error ("write error reply: %m");
+ return connection_set_status (conn, -1);
+ }
+
+ /* Send the error. */
+ error_data.error = htobe32 (error);
+ error_data.len = htobe16 (0);
+ r = conn->send (conn, &error_data, sizeof error_data);
+ if (r == -1) {
+ nbdkit_error ("write data: %s: %m", name_of_nbd_cmd (cmd));
+ return connection_set_status (conn, -1);
+ }
+ /* No human readable error message at the moment. */
+
+ return 1; /* command processed ok */
+}
+
+int
+protocol_recv_request_send_reply (struct connection *conn)
+{
+ int r;
+ struct request request;
+ uint16_t cmd, flags;
+ uint32_t magic, count, error = 0;
+ uint64_t offset;
+ CLEANUP_FREE char *buf = NULL;
+
+ /* Read the request packet. */
+ {
+ ACQUIRE_LOCK_FOR_CURRENT_SCOPE (&conn->read_lock);
+ r = connection_get_status (conn);
+ if (r <= 0)
+ return r;
+ r = conn->recv (conn, &request, sizeof request);
+ if (r == -1) {
+ nbdkit_error ("read request: %m");
+ return connection_set_status (conn, -1);
+ }
+ if (r == 0) {
+ debug ("client closed input socket, closing connection");
+ return connection_set_status (conn, 0); /* disconnect */
+ }
+
+ magic = be32toh (request.magic);
+ if (magic != NBD_REQUEST_MAGIC) {
+ nbdkit_error ("invalid request: 'magic' field is incorrect
(0x%x)",
+ magic);
+ return connection_set_status (conn, -1);
+ }
+
+ flags = be16toh (request.flags);
+ cmd = be16toh (request.type);
+
+ offset = be64toh (request.offset);
+ count = be32toh (request.count);
+
+ if (cmd == NBD_CMD_DISC) {
+ debug ("client sent %s, closing connection", name_of_nbd_cmd (cmd));
+ return connection_set_status (conn, 0); /* disconnect */
+ }
+
+ /* Validate the request. */
+ if (!validate_request (conn, cmd, flags, offset, count, &error)) {
+ if (cmd == NBD_CMD_WRITE &&
+ skip_over_write_buffer (conn->sockin, count) < 0)
+ return connection_set_status (conn, -1);
+ goto send_reply;
+ }
+
+ /* Allocate the data buffer used for either read or write requests. */
+ if (cmd == NBD_CMD_READ || cmd == NBD_CMD_WRITE) {
+ buf = malloc (count);
+ if (buf == NULL) {
+ perror ("malloc");
+ error = ENOMEM;
+ if (cmd == NBD_CMD_WRITE &&
+ skip_over_write_buffer (conn->sockin, count) < 0)
+ return connection_set_status (conn, -1);
+ goto send_reply;
+ }
+ }
+
+ /* Receive the write data buffer. */
+ if (cmd == NBD_CMD_WRITE) {
+ r = conn->recv (conn, buf, count);
+ if (r == 0) {
+ errno = EBADMSG;
+ r = -1;
+ }
+ if (r == -1) {
+ nbdkit_error ("read data: %s: %m", name_of_nbd_cmd (cmd));
+ return connection_set_status (conn, -1);
+ }
+ }
+ }
+
+ /* Perform the request. Only this part happens inside the request lock. */
+ if (quit || !connection_get_status (conn)) {
+ error = ESHUTDOWN;
+ }
+ else {
+ lock_request (conn);
+ error = handle_request (conn, cmd, flags, offset, count, buf);
+ assert ((int) error >= 0);
+ unlock_request (conn);
+ }
+
+ /* Send the reply packet. */
+ send_reply:
+ if (connection_get_status (conn) < 0)
+ return -1;
+
+ if (error != 0) {
+ /* Since we're about to send only the limited NBD_E* errno to the
+ * client, don't lose the information about what really happened
+ * on the server side. Make sure there is a way for the operator
+ * to retrieve the real error.
+ */
+ debug ("sending error reply: %s", strerror (error));
+ }
+
+ /* Currently we prefer to send simple replies for everything except
+ * where we have to (ie. NBD_CMD_READ when structured_replies have
+ * been negotiated). However this prevents us from sending
+ * human-readable error messages to the client, so we should
+ * reconsider this in future.
+ */
+ if (conn->structured_replies && cmd == NBD_CMD_READ) {
+ if (!error)
+ return send_structured_reply_read (conn, request.handle, cmd,
+ buf, count, offset);
+ else
+ return send_structured_reply_error (conn, request.handle, cmd, error);
+ }
+ else
+ return send_simple_reply (conn, request.handle, cmd, buf, count, error);
+}
diff --git a/server/Makefile.am b/server/Makefile.am
index b198afb..5eb575e 100644
--- a/server/Makefile.am
+++ b/server/Makefile.am
@@ -52,6 +52,10 @@ nbdkit_SOURCES = \
main.c \
options.h \
plugins.c \
+ protocol.c \
+ protocol-handshake.c \
+ protocol-handshake-oldstyle.c \
+ protocol-handshake-newstyle.c \
protocol.h \
protostrings.c \
quit.c \
--
2.20.1
12:34 p.m.
New subject: [PATCH nbdkit 2/2] server: Split out NBD protocol code from connections code.
On 3/18/19 12:02 PM, Richard W.M. Jones wrote:
The code handling the NBD protocol was located in the same file as
the
code handling connections, for not really any reason except historical.
This is quite a large code movement which splits out the protocol code
into four new files:
server/protocol-handshake.c initial handshake
server/protocol-handshake-newstyle.c " " (newstyle)
server/protocol-handshake-oldstyle.c " " (oldstyle)
server/protocol.c requests and replies
This also renames functions more logically and gets rid of functions
named with leading underscores.
And it reminds me that I still need to make time to write patches to
move server/protocol* into util, so that the nbd plugin can make use of
it with a proper -l to a convenience library rather than its current
hack that abuses out-of-directory files and causes automake to warn:
plugins/nbd/Makefile.am:39: warning: source file
'$(top_srcdir)/server/protostrings.c' is in a subdirectory,
At any rate, this series makes sense and looks good to go. As you said,
it's big, but mechanical.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
2112
days inactive
2112
days old
3 comments
2 participants
participants (2)
-
Eric Blake -
Richard W.M. Jones