How to build virt-v2v after the project was separated
Looks like virt-v2v cannot be built now, since it requires non-existing version of libguestfs-devel. Based on (no README or any instructions in virt-v2v) http://libguestfs.org/guestfs-building.1.html I tried this: git clean -dxf ./autogen.sh And it fails with: --- Checking for libraries used by virt-v2v --- checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBGUESTFS... no configure: error: Package requirements (libguestfs >= 1.41.5) were not met: Package dependency requirement 'libguestfs >= 1.41.5' could not be satisfied. Package 'libguestfs' has version '1.40.2', required version is '>= 1.41.5' $ rpm -qa | grep libguestfs libguestfs-xfs-1.40.2-4.fc30.x86_64 libguestfs-tools-c-1.40.2-4.fc30.x86_64 libguestfs-devel-1.40.2-4.fc30.x86_64 libguestfs-1.40.2-4.fc30.x86_64 Is it possible to build using libguestfs source? Nir
On Sun, Nov 17, 2019 at 06:07:48PM +0200, Nir Soffer wrote:
Looks like virt-v2v cannot be built now, since it requires non-existing version of libguestfs-devel.
Based on (no README or any instructions in virt-v2v) http://libguestfs.org/guestfs-building.1.html
I tried this:
git clean -dxf ./autogen.sh
And it fails with:
--- Checking for libraries used by virt-v2v --- checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBGUESTFS... no configure: error: Package requirements (libguestfs >= 1.41.5) were not met:
Package dependency requirement 'libguestfs >= 1.41.5' could not be satisfied. Package 'libguestfs' has version '1.40.2', required version is '>= 1.41.5'
You can actually use 1.40 just fine. There is a single test which requires 1.41 (I forget now which one), and we should probably change that test to make it conditional. Just modify m4/guestfs-libraries.m4: -PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.41.5]) +PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.40]) and rerun ‘autoreconf -i’. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-builder quickly builds VMs from scratch http://libguestfs.org/virt-builder.1.html
On Sun, Nov 17, 2019 at 7:03 PM Richard W.M. Jones <rjones@redhat.com> wrote:
On Sun, Nov 17, 2019 at 06:07:48PM +0200, Nir Soffer wrote:
Looks like virt-v2v cannot be built now, since it requires non-existing version of libguestfs-devel.
Based on (no README or any instructions in virt-v2v) http://libguestfs.org/guestfs-building.1.html
I tried this:
git clean -dxf ./autogen.sh
And it fails with:
--- Checking for libraries used by virt-v2v --- checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBGUESTFS... no configure: error: Package requirements (libguestfs >= 1.41.5) were not met:
Package dependency requirement 'libguestfs >= 1.41.5' could not be satisfied. Package 'libguestfs' has version '1.40.2', required version is '>= 1.41.5'
You can actually use 1.40 just fine. There is a single test which requires 1.41 (I forget now which one), and we should probably change that test to make it conditional. Just modify m4/guestfs-libraries.m4:
-PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.41.5]) +PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.40])
and rerun ‘autoreconf -i’.
Thanks, will try it.
On Sun, Nov 17, 2019 at 7:03 PM Richard W.M. Jones <rjones@redhat.com> wrote:
On Sun, Nov 17, 2019 at 06:07:48PM +0200, Nir Soffer wrote:
Looks like virt-v2v cannot be built now, since it requires non-existing version of libguestfs-devel.
Based on (no README or any instructions in virt-v2v) http://libguestfs.org/guestfs-building.1.html
I tried this:
git clean -dxf ./autogen.sh
And it fails with:
--- Checking for libraries used by virt-v2v --- checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LIBGUESTFS... no configure: error: Package requirements (libguestfs >= 1.41.5) were not met:
Package dependency requirement 'libguestfs >= 1.41.5' could not be satisfied. Package 'libguestfs' has version '1.40.2', required version is '>= 1.41.5'
You can actually use 1.40 just fine. There is a single test which requires 1.41 (I forget now which one), and we should probably change that test to make it conditional. Just modify m4/guestfs-libraries.m4:
-PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.41.5]) +PKG_CHECK_MODULES([LIBGUESTFS], [libguestfs >= 1.40])
and rerun ‘autoreconf -i’.
Tried again with new clean checkout, this change fixes the issue. The next issue is same as libguestfs: autoreconf: running: automake --add-missing --copy --no-force configure.ac:30: installing 'build-aux/missing' configure.ac:102: error: required file 'common/options/Makefile.in' not found configure.ac:102: error: required file 'common/mlaugeas/Makefile.in' not found configure.ac:102: error: required file 'common/mlcustomize/Makefile.in' not found ... parallel-tests: installing 'build-aux/test-driver' gnulib/lib/Makefile.am: installing 'build-aux/depcomp' autoreconf: automake failed with exit status: 1 autogen.sh ignores the error and continue, and finally failing with: config.status: error: cannot find input file: `Makefile.in' Looking in common we have: $ tree common common ├── mlgettext │ └── common_gettext.ml └── mlstdutils I tried you other suggests for git submodules: $ git submodule init Submodule 'common' (https://github.com/libguestfs/libguestfs-common) registered for path 'common' $ git submodule update fatal: destination path '/home/nsoffer/src/virt-v2v/common' already exists and is not an empty directory. fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into submodule path '/home/nsoffer/src/virt-v2v/common' failed Failed to clone 'common'. Retry scheduled fatal: destination path '/home/nsoffer/src/virt-v2v/common' already exists and is not an empty directory. fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into submodule path '/home/nsoffer/src/virt-v2v/common' failed Failed to clone 'common' a second time, aborting So I tried: rm -rf common/* $ git submodule update Cloning into '/home/nsoffer/src/virt-v2v/common'... Submodule path 'common': checked out '8c42f772614b44a8cb974afa904ec9f518431ab2' $ ./autogen.sh This seems to fix the issue, but make failed with: $ make -j8 There seems to be no Makefile in this directory. You must run ./configure before running 'make'. make: *** [GNUmakefile:108: abort-due-to-no-makefile] Error 1 $ ./configure Works, but now make fail with: $ make -j8 make all-recursive make[1]: Entering directory '/home/nsoffer/src/virt-v2v' Making all in common/mlstdutils make[2]: Entering directory '/home/nsoffer/src/virt-v2v/common/mlstdutils' OCAMLCMI guestfs_config.cmi OCAMLCMI stringMap.cmi CC libmlstdutils_a-dummy.o OCAMLCMI stringSet.cmi OCAMLCMI std_utils.cmi ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found make[2]: *** [Makefile:2547: stringMap.cmi] Error 2 make[2]: *** Waiting for unfinished jobs.... make[2]: *** [Makefile:2547: guestfs_config.cmi] Error 2 make[2]: *** [Makefile:2547: std_utils.cmi] Error 2 make[2]: *** [Makefile:2547: stringSet.cmi] Error 2 make[2]: Leaving directory '/home/nsoffer/src/virt-v2v/common/mlstdutils' make[1]: *** [Makefile:2066: all-recursive] Error 1 make[1]: Leaving directory '/home/nsoffer/src/virt-v2v' make: *** [Makefile:1986: all] Error 2 Sometihng missing in common?
On Mon, Nov 18, 2019 at 03:03:10AM +0200, Nir Soffer wrote:
$ git submodule update fatal: destination path '/home/nsoffer/src/virt-v2v/common' already exists and is not an empty directory. fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into submodule path '/home/nsoffer/src/virt-v2v/common' failed Failed to clone 'common'. Retry scheduled fatal: destination path '/home/nsoffer/src/virt-v2v/common' already exists and is not an empty directory. fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into submodule path '/home/nsoffer/src/virt-v2v/common' failed Failed to clone 'common' a second time, aborting
So I tried:
rm -rf common/*
Sounds like files from the old directory were still around after a git pull. Removing common/ was the right thing to do. ...
$ ./configure
Works, but now make fail with:
$ make -j8 make all-recursive make[1]: Entering directory '/home/nsoffer/src/virt-v2v' Making all in common/mlstdutils make[2]: Entering directory '/home/nsoffer/src/virt-v2v/common/mlstdutils' OCAMLCMI guestfs_config.cmi OCAMLCMI stringMap.cmi CC libmlstdutils_a-dummy.o OCAMLCMI stringSet.cmi OCAMLCMI std_utils.cmi ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found
This happens because the Fedora package ocaml-libguestfs-devel is not installed. ./configure should have spotting this was missing, so this is a bug in virt-v2v. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com libguestfs lets you edit virtual machines. Supports shell scripting, bindings from many languages. http://libguestfs.org
On Mon, Nov 18, 2019 at 11:40 AM Richard W.M. Jones <rjones@redhat.com> wrote:
On Mon, Nov 18, 2019 at 03:03:10AM +0200, Nir Soffer wrote:
$ git submodule update fatal: destination path '/home/nsoffer/src/virt-v2v/common' already exists and is not an empty directory. fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into submodule path '/home/nsoffer/src/virt-v2v/common' failed Failed to clone 'common'. Retry scheduled fatal: destination path '/home/nsoffer/src/virt-v2v/common' already exists and is not an empty directory. fatal: clone of 'https://github.com/libguestfs/libguestfs-common' into submodule path '/home/nsoffer/src/virt-v2v/common' failed Failed to clone 'common' a second time, aborting
So I tried:
rm -rf common/*
Sounds like files from the old directory were still around after a git pull. Removing common/ was the right thing to do.
I tried with new checkout: rm -rf virt-v2v git clone ... So this must be another issue.
...
$ ./configure
Works, but now make fail with:
$ make -j8 make all-recursive make[1]: Entering directory '/home/nsoffer/src/virt-v2v' Making all in common/mlstdutils make[2]: Entering directory '/home/nsoffer/src/virt-v2v/common/mlstdutils' OCAMLCMI guestfs_config.cmi OCAMLCMI stringMap.cmi CC libmlstdutils_a-dummy.o OCAMLCMI stringSet.cmi OCAMLCMI std_utils.cmi ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found ocamlfind: Package `guestfs' not found
This happens because the Fedora package ocaml-libguestfs-devel is not installed. ./configure should have spotting this was missing, so this is a bug in virt-v2v.
Rich.
-- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com libguestfs lets you edit virtual machines. Supports shell scripting, bindings from many languages. http://libguestfs.org
I've pushed a few commits which fix various aspects of the build and may improve things for you: commit d5ce9c91469d3d384aa32735453a1f8a20d4ec25 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 10:11:57 2019 +0000 tests: Add TESTS_ENVIRONMENT in a couple of makefiles. We were accidentally testing the installed virt-v2v rather than the locally built one. commit fffa7732c5d4899217c36985f1ef753d2469f1cd Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:46:49 2019 +0000 m4: Relax dependency on libguestfs versions. 1.41 was only required to run a single test, but in all other respects 1.40 works fine. Relax the dependency and fix the test instead. Thanks: Nir Soffer. commit 8cab32c0eb4b455d7f0700ef5966eed3a23b6327 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:45:05 2019 +0000 m4: Remove daemon checks and dependency on hivex. Now that we've split out virt-v2v, there's no daemon, and hivex is not required (since it is only used through the guestfs API). commit 48afc3b004e44feaf3844c5eeb96e2a1aadbeb03 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:44:12 2019 +0000 m4: Check that ocaml 'guestfs' module is available. It is required to compile virt-v2v after we split out libguestfs and virt-v2v. Thanks: Nir Soffer. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com libguestfs lets you edit virtual machines. Supports shell scripting, bindings from many languages. http://libguestfs.org
On Mon, Nov 18, 2019 at 12:15 PM Richard W.M. Jones <rjones@redhat.com> wrote:
I've pushed a few commits which fix various aspects of the build and may improve things for you:
With current master building virt-v2v succeeds, thanks! I think we still have an issue with new checkout, having to delete common/ and update the submodule.
commit d5ce9c91469d3d384aa32735453a1f8a20d4ec25 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 10:11:57 2019 +0000
tests: Add TESTS_ENVIRONMENT in a couple of makefiles.
We were accidentally testing the installed virt-v2v rather than the locally built one.
commit fffa7732c5d4899217c36985f1ef753d2469f1cd Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:46:49 2019 +0000
m4: Relax dependency on libguestfs versions.
1.41 was only required to run a single test, but in all other respects 1.40 works fine. Relax the dependency and fix the test instead.
Thanks: Nir Soffer.
commit 8cab32c0eb4b455d7f0700ef5966eed3a23b6327 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:45:05 2019 +0000
m4: Remove daemon checks and dependency on hivex.
Now that we've split out virt-v2v, there's no daemon, and hivex is not required (since it is only used through the guestfs API).
commit 48afc3b004e44feaf3844c5eeb96e2a1aadbeb03 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:44:12 2019 +0000
m4: Check that ocaml 'guestfs' module is available.
It is required to compile virt-v2v after we split out libguestfs and virt-v2v.
Thanks: Nir Soffer.
Rich.
-- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com libguestfs lets you edit virtual machines. Supports shell scripting, bindings from many languages. http://libguestfs.org
On Mon, Nov 18, 2019 at 7:11 PM Nir Soffer <nsoffer@redhat.com> wrote:
On Mon, Nov 18, 2019 at 12:15 PM Richard W.M. Jones <rjones@redhat.com> wrote:
I've pushed a few commits which fix various aspects of the build and may improve things for you:
With current master building virt-v2v succeeds, thanks!
I think we still have an issue with new checkout, having to delete common/ and update the submodule.
Tried this again with clean checkout. Complete instructions for building virt-v2v in the first time: git clone https://github.com/libguestfs/virt-v2v.git cd virt-v2v git submodule init git submodule update ./autogen.sh make rm po-docs/podfiles make -C po-docs update-po ./run virt-v2v --version virt-v2v 1.41.7 Looks like autogen.sh and bootstrap need update for common submodule, since they check and handle only gnulib status.
commit d5ce9c91469d3d384aa32735453a1f8a20d4ec25 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 10:11:57 2019 +0000
tests: Add TESTS_ENVIRONMENT in a couple of makefiles.
We were accidentally testing the installed virt-v2v rather than the locally built one.
commit fffa7732c5d4899217c36985f1ef753d2469f1cd Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:46:49 2019 +0000
m4: Relax dependency on libguestfs versions.
1.41 was only required to run a single test, but in all other respects 1.40 works fine. Relax the dependency and fix the test instead.
Thanks: Nir Soffer.
commit 8cab32c0eb4b455d7f0700ef5966eed3a23b6327 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:45:05 2019 +0000
m4: Remove daemon checks and dependency on hivex.
Now that we've split out virt-v2v, there's no daemon, and hivex is not required (since it is only used through the guestfs API).
commit 48afc3b004e44feaf3844c5eeb96e2a1aadbeb03 Author: Richard W.M. Jones <rjones@redhat.com> Date: Mon Nov 18 09:44:12 2019 +0000
m4: Check that ocaml 'guestfs' module is available.
It is required to compile virt-v2v after we split out libguestfs and virt-v2v.
Thanks: Nir Soffer.
Rich.
-- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com libguestfs lets you edit virtual machines. Supports shell scripting, bindings from many languages. http://libguestfs.org
participants (2)
-
Nir Soffer -
Richard W.M. Jones