2:45 p.m.
Hello,
I am trying to use virt-resize. It does not work. I set the debug environment variables
and ran libguestfs-test-tool. The following is its output. I am running RHEL 6.5 desktop
with kernel:
Linux hustedm-lnx4 2.6.32-431.5.1.el6.x86_64 #1 SMP Fri Jan 10 14:46:43 EST 2014 x86_64
x86_64 x86_64 GNU/Linux
Please let me know what I have missed.
Thanks,
Mark
bash-4.1$ libguestfs-test-tool
************************************************************
* IMPORTANT NOTICE
*
* When reporting bugs, include the COMPLETE, UNEDITED
* output below in your bug report.
*
************************************************************
libguestfs: trace: set_verbose true
libguestfs: trace: set_verbose = 0
libguestfs: trace: set_verbose true
libguestfs: trace: set_verbose = 0
LIBGUESTFS_DEBUG=1
LIBGUESTFS_TRACE=1
PATH=/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin
SELinux: Disabled
libguestfs: trace: add_drive "/tmp/libguestfs-test-tool-sda-SLEdMd"
"format:raw"
libguestfs: trace: add_drive = 0
libguestfs: trace: version
libguestfs: trace: version = <struct guestfs_version *>
library version: 1.20.11rhel=6,release=2.el6
libguestfs: trace: get_append
libguestfs: trace: get_append = "NULL"
guestfs_get_append: (null)
libguestfs: trace: get_attach_method
libguestfs: trace: get_attach_method = "appliance"
guestfs_get_attach_method: appliance
libguestfs: trace: get_autosync
libguestfs: trace: get_autosync = 1
guestfs_get_autosync: 1
libguestfs: trace: get_cachedir
libguestfs: trace: get_cachedir = "/var/tmp"
guestfs_get_cachedir: /var/tmp
libguestfs: trace: get_direct
libguestfs: trace: get_direct = 0
guestfs_get_direct: 0
libguestfs: trace: get_memsize
libguestfs: trace: get_memsize = 500
guestfs_get_memsize: 500
libguestfs: trace: get_network
libguestfs: trace: get_network = 0
guestfs_get_network: 0
libguestfs: trace: get_path
libguestfs: trace: get_path = "/usr/lib64/guestfs"
guestfs_get_path: /usr/lib64/guestfs
libguestfs: trace: get_pgroup
libguestfs: trace: get_pgroup = 0
guestfs_get_pgroup: 0
libguestfs: trace: get_qemu
libguestfs: trace: get_qemu = "/usr/libexec/qemu-kvm"
guestfs_get_qemu: /usr/libexec/qemu-kvm
libguestfs: trace: get_recovery_proc
libguestfs: trace: get_recovery_proc = 1
guestfs_get_recovery_proc: 1
libguestfs: trace: get_selinux
libguestfs: trace: get_selinux = 0
guestfs_get_selinux: 0
libguestfs: trace: get_smp
libguestfs: trace: get_smp = 1
guestfs_get_smp: 1
libguestfs: trace: get_tmpdir
libguestfs: trace: get_tmpdir = "/tmp"
guestfs_get_tmpdir: /tmp
libguestfs: trace: get_trace
libguestfs: trace: get_trace = 1
guestfs_get_trace: 1
libguestfs: trace: get_verbose
libguestfs: trace: get_verbose = 1
guestfs_get_verbose: 1
host_cpu: x86_64
Launching appliance, timeout set to 600 seconds.
libguestfs: trace: launch
libguestfs: trace: get_tmpdir
libguestfs: trace: get_tmpdir = "/tmp"
libguestfs: launch: attach-method=appliance
libguestfs: launch: tmpdir=/tmp/libguestfs98LK1f
libguestfs: launch: umask=0022
libguestfs: launch: euid=172990
libguestfs: command: run: febootstrap-supermin-helper
libguestfs: command: run: \ --verbose
libguestfs: command: run: \ -f checksum
libguestfs: command: run: \ /usr/lib64/guestfs/supermin.d
libguestfs: command: run: \ x86_64
supermin helper [00000ms] whitelist = (not specified), host_cpu = x86_64, kernel = (null),
initrd = (null), appliance = (null)
supermin helper [00000ms] inputs[0] = /usr/lib64/guestfs/supermin.d
checking modpath /lib/modules/2.6.32-358.0.1.el6.x86_64 is a directory
picked vmlinuz-2.6.32-358.0.1.el6.x86_64 because modpath
/lib/modules/2.6.32-358.0.1.el6.x86_64 exists
checking modpath /lib/modules/2.6.32-279.el6.x86_64 is a directory
picked vmlinuz-2.6.32-279.el6.x86_64 because modpath /lib/modules/2.6.32-279.el6.x86_64
exists
checking modpath /lib/modules/2.6.32-431.5.1.el6.x86_64 is a directory
picked vmlinuz-2.6.32-431.5.1.el6.x86_64 because modpath
/lib/modules/2.6.32-431.5.1.el6.x86_64 exists
supermin helper [00000ms] finished creating kernel
supermin helper [00000ms] visiting /usr/lib64/guestfs/supermin.d
supermin helper [00000ms] visiting /usr/lib64/guestfs/supermin.d/base.img
supermin helper [00000ms] visiting /usr/lib64/guestfs/supermin.d/daemon.img
supermin helper [00000ms] visiting /usr/lib64/guestfs/supermin.d/hostfiles
supermin helper [00019ms] visiting /usr/lib64/guestfs/supermin.d/init.img
supermin helper [00020ms] visiting /usr/lib64/guestfs/supermin.d/udev-rules.img
supermin helper [00020ms] adding kernel modules
supermin helper [00045ms] finished creating appliance
libguestfs: checksum of existing appliance:
7b8750ee421097e06adfcd48c6a7fbefc3ab131ff84819e41c15d770fef8702b
libguestfs: trace: get_cachedir
libguestfs: trace: get_cachedir = "/var/tmp"
libguestfs: [00047ms] begin testing qemu features
libguestfs: command: run: /usr/libexec/qemu-kvm
libguestfs: command: run: \ -nographic
libguestfs: command: run: \ -help
libguestfs: command: run: /usr/libexec/qemu-kvm
libguestfs: command: run: \ -nographic
libguestfs: command: run: \ -version
libguestfs: qemu version 0.12
libguestfs: command: run: /usr/libexec/qemu-kvm
libguestfs: command: run: \ -nographic
libguestfs: command: run: \ -machine accel=kvm:tcg
libguestfs: command: run: \ -device ?
libguestfs: [00074ms] finished testing qemu features
libguestfs: accept_from_daemon: 0xdd3cf0 g->state = 1
[00075ms] /usr/libexec/qemu-kvm \
-global virtio-blk-pci.scsi=off \
-nodefconfig \
-nodefaults \
-nographic \
-machine accel=kvm:tcg \
-cpu host,+kvmclock \
-m 500 \
-no-reboot \
-kernel /var/tmp/.guestfs-172990/kernel.9600 \
-initrd /var/tmp/.guestfs-172990/initrd.9600 \
-device virtio-scsi-pci,id=scsi \
-drive file=/tmp/libguestfs-test-tool-sda-SLEdMd,cache=none,format=raw,id=hd0,if=none
\
-device scsi-hd,drive=hd0 \
-drive
file=/var/tmp/.guestfs-172990/root.9600,snapshot=on,id=appliance,if=none,cache=unsafe \
-device scsi-hd,drive=appliance \
-device virtio-serial \
-serial stdio \
-device sga \
-chardev socket,path=/tmp/libguestfs98LK1f/guestfsd.sock,id=channel0 \
-device virtserialport,chardev=channel0,name=org.libguestfs.channel.0 \
-append 'panic=1 console=ttyS0 udevtimeout=600 no_timer_check acpi=off
printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1
TERM=xterm'
kvm_create_vm: Device or resource busy
failed to initialize KVM: Operation not permitted
Back to tcg accelerator.
Unknown cpu model: host
Unable to support requested x86 CPU definition
libguestfs: child_cleanup: 0xdd3cf0: child process died
libguestfs: sending SIGTERM to process 9610
libguestfs: error: /usr/libexec/qemu-kvm exited with error status 1, see debug messages
above
libguestfs: error: guestfs_launch failed, see earlier error messages
libguestfs: trace: launch = -1 (error)
libguestfs-test-tool: failed to launch appliance
libguestfs: trace: close
libguestfs: closing guestfs handle 0xdd3cf0 (state 0)
libguestfs: command: run: rm
libguestfs: command: run: \ -rf /tmp/libguestfs98LK1f
bash-4.1$
[http://www.cisco.com/web/europe/images/email/signature/logo05.jpg]
Mark Husted
ENGINEER.SOFTWARE ENGINEERING
Service Provider Video Technology Group
hustedm@cisco.com<mailto:hustedm@cisco.com>
Phone: +1 770 236 1242
Bldg 2.1.238
5030 Sugarloaf Parkway
Lawrenceville, GA 30044
United States
Cisco.com<http://www.cisco.com>
[Think before you print.]Think before you print.
This email may contain confidential and privileged material for the sole use of the
intended recipient. Any review, use, distribution or disclosure by others is strictly
prohibited. If you are not the intended recipient (or authorized to receive for the
recipient), please contact the sender by reply email and delete all copies of this
message.
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html
3:16 p.m.
On Thu, Aug 21, 2014 at 07:45:31PM +0000, Mark Husted (hustedm) wrote:
Hello,
I am trying to use virt-resize. It does not work. I set the debug
environment variables and ran libguestfs-test-tool. The following
is its output. I am running RHEL 6.5 desktop with kernel:
Linux hustedm-lnx4 2.6.32-431.5.1.el6.x86_64 #1 SMP Fri Jan 10
14:46:43 EST 2014 x86_64 x86_64 x86_64 GNU/Linux
Please let me know what I have missed.
[...]
kvm_create_vm: Device or resource busy
failed to initialize KVM: Operation not permitted
This is not good! Does KVM generally work on this machine? Do you
have VirtualBox or another hypervisor running at the same time?
If you were running a later version of libguestfs then I would
recommend setting:
export LIBGUESTFS_BACKEND_SETTINGS=force_tcg
Unfortunately that doesn't work on 1.20 (added in 1.26) and doing the
equivalent in RHEL 6 is rather involved.
If KVM is broken or there's another hypervisor running you could
also try making /dev/kvm unreadable (chmod 0 /dev/kvm <or> rm /dev/kvm).
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
3:20 p.m.
Hello Rich,
I am not sure if KVM ever ran. I put VirtualBox in it because I have never done
virtualization before and found some instructions for VB. That said, I might have naively
shut something off because I didn't know any better. No VB was not running at the
time. I thought of that and turned it off. Though, I bet the services are still up.
What is the standard kvm service? I could check to see if it is running properly. And we
could go from there.
Thanks for the quick response!
-Mark
Thanks,
Mark Husted
770-236-1242
-----Original Message-----
From: Richard W.M. Jones [mailto:rjones@redhat.com]
Sent: Thursday, August 21, 2014 4:17 PM
To: Mark Husted (hustedm)
Cc: libguestfs(a)redhat.com
Subject: Re: [Libguestfs] libguest-test-tool error report
On Thu, Aug 21, 2014 at 07:45:31PM +0000, Mark Husted (hustedm) wrote:
Hello,
I am trying to use virt-resize. It does not work. I set the debug
environment variables and ran libguestfs-test-tool. The following is
its output. I am running RHEL 6.5 desktop with kernel:
Linux hustedm-lnx4 2.6.32-431.5.1.el6.x86_64 #1 SMP Fri Jan 10
14:46:43 EST 2014 x86_64 x86_64 x86_64 GNU/Linux
Please let me know what I have missed.
[...]
kvm_create_vm: Device or resource busy failed to initialize KVM:
Operation not permitted
This is not good! Does KVM generally work on this machine? Do you have VirtualBox or
another hypervisor running at the same time?
If you were running a later version of libguestfs then I would recommend setting:
export LIBGUESTFS_BACKEND_SETTINGS=force_tcg
Unfortunately that doesn't work on 1.20 (added in 1.26) and doing the equivalent in
RHEL 6 is rather involved.
If KVM is broken or there's another hypervisor running you could also try making
/dev/kvm unreadable (chmod 0 /dev/kvm <or> rm /dev/kvm).
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my
programming and virtualization blog: http://rwmj.wordpress.com virt-p2v converts physical
machines to virtual machines. Boot with a live CD or over the network (PXE) and turn
machines into KVM guests.
http://libguestfs.org/virt-v2v
3:33 p.m.
On Thu, Aug 21, 2014 at 08:20:11PM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
I am not sure if KVM ever ran. I put VirtualBox in it because I
have never done virtualization before and found some instructions
for VB. That said, I might have naively shut something off because
I didn't know any better. No VB was not running at the time. I
thought of that and turned it off. Though, I bet the services are
still up.
What is the standard kvm service? I could check to see if it is
running properly. And we could go from there.
There's not really a "KVM service" as such. It is a part of the
kernel is only used when you start a KVM guest.
In any case as it looks like you have VirtualBox running, my advice
would be to delete the /dev/kvm file, and try running
libguestfs-test-tool and/or virt-resize again.
sudo rm /dev/kvm
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
8:50 p.m.
Hello Rich,
I figured out how to stop the VB services. I then deleted the /dev/kvm. Then I ran the
libguestfs-test-tool and it said 'OK'. Then I ran virt-resize and it was unhappy
that /dev/kvm no longer existed. I have attached the debug output for your review.
Thanks,
Mark
Thanks,
Mark Husted
770-236-1242
-----Original Message-----
From: Richard W.M. Jones [mailto:rjones@redhat.com]
Sent: Thursday, August 21, 2014 4:34 PM
To: Mark Husted (hustedm)
Cc: libguestfs(a)redhat.com
Subject: Re: [Libguestfs] libguest-test-tool error report
On Thu, Aug 21, 2014 at 08:20:11PM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
I am not sure if KVM ever ran. I put VirtualBox in it because I have
never done virtualization before and found some instructions for VB.
That said, I might have naively shut something off because I didn't
know any better. No VB was not running at the time. I thought of
that and turned it off. Though, I bet the services are still up.
What is the standard kvm service? I could check to see if it is
running properly. And we could go from there.
There's not really a "KVM service" as such. It is a part of the kernel is
only used when you start a KVM guest.
In any case as it looks like you have VirtualBox running, my advice would be to delete the
/dev/kvm file, and try running libguestfs-test-tool and/or virt-resize again.
sudo rm /dev/kvm
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my
programming and virtualization blog: http://rwmj.wordpress.com libguestfs lets you edit
virtual machines. Supports shell scripting, bindings from many languages.
http://libguestfs.org
2:43 a.m.
On Fri, Aug 22, 2014 at 01:50:49AM +0000, Mark Husted (hustedm) wrote:
qemu-kvm: -drive
file=centos6.4-x86_64-gold-master-5G.img,cache=none,id=hd1,if=none: 'hd1' uses a
qcow2 feature which is not supported by this qemu version: QCOW version 3
qemu-kvm: -drive file=centos6.4-x86_64-gold-master-5G.img,cache=none,id=hd1,if=none:
could not open disk image centos6.4-x86_64-gold-master-5G.img: Operation not supported
The problem is that the disk image uses qcow2 features which were
added in RHEL 7. RHEL 6 is simply unable to read or process this disk
image.
The only solution here is to update the host to RHEL 7 / CentOS 7.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
6:33 a.m.
Hello Rich,
Well, that stinks.
I really appreciate the quick responses. Thank you for your time and effort, too. I will
see what I can do to solve this problem some other way. Maybe I can virtualize my disk
image maker.
Thanks,
Mark
Thanks,
Mark Husted
770-236-1242
-----Original Message-----
From: Richard W.M. Jones [mailto:rjones@redhat.com]
Sent: Friday, August 22, 2014 3:43 AM
To: Mark Husted (hustedm)
Cc: libguestfs(a)redhat.com
Subject: Re: [Libguestfs] libguest-test-tool error report
On Fri, Aug 22, 2014 at 01:50:49AM +0000, Mark Husted (hustedm) wrote:
qemu-kvm: -drive
file=centos6.4-x86_64-gold-master-5G.img,cache=none,id=hd1,if=none:
'hd1' uses a qcow2 feature which is not supported by this qemu
version: QCOW version 3
qemu-kvm: -drive
file=centos6.4-x86_64-gold-master-5G.img,cache=none,id=hd1,if=none:
could not open disk image centos6.4-x86_64-gold-master-5G.img:
Operation not supported
The problem is that the disk image uses qcow2 features which were added in RHEL 7. RHEL 6
is simply unable to read or process this disk image.
The only solution here is to update the host to RHEL 7 / CentOS 7.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my
programming and virtualization blog: http://rwmj.wordpress.com virt-p2v converts physical
machines to virtual machines. Boot with a live CD or over the network (PXE) and turn
machines into KVM guests.
http://libguestfs.org/virt-v2v
7:30 a.m.
On Fri, Aug 22, 2014 at 11:33:20AM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
Well, that stinks.
I really appreciate the quick responses. Thank you for your time and effort, too. I
will see what I can do to solve this problem some other way. Maybe I can virtualize my
disk image maker.
I should have mentioned that it's possible to create the disk image in
a compatible mode. You have to use the `compat=0.10' option (see
qemu-img man page for where to put that). However once you've created
the disk image it is my understanding that you cannot `downgrade' it.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
8:03 a.m.
Hello Rich,
Well, I did give that a try. But it is back to being unable to access kvm (log attached).
It did make the qemu error go away.
Thanks,
Mark
Thanks,
Mark Husted
770-236-1242
-----Original Message-----
From: Richard W.M. Jones [mailto:rjones@redhat.com]
Sent: Friday, August 22, 2014 8:31 AM
To: Mark Husted (hustedm)
Cc: libguestfs(a)redhat.com
Subject: Re: [Libguestfs] libguest-test-tool error report
On Fri, Aug 22, 2014 at 11:33:20AM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
Well, that stinks.
I really appreciate the quick responses. Thank you for your time and effort, too. I
will see what I can do to solve this problem some other way. Maybe I can virtualize my
disk image maker.
I should have mentioned that it's possible to create the disk image in a compatible
mode. You have to use the `compat=0.10' option (see qemu-img man page for where to
put that). However once you've created the disk image it is my understanding that you
cannot `downgrade' it.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my
programming and virtualization blog: http://rwmj.wordpress.com virt-p2v converts physical
machines to virtual machines. Boot with a live CD or over the network (PXE) and turn
machines into KVM guests.
http://libguestfs.org/virt-v2v
8:06 a.m.
On Fri, Aug 22, 2014 at 01:03:39PM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
Well, I did give that a try. But it is back to being unable to access kvm (log
attached). It did make the qemu error go away.
kvm_create_vm: Device or resource busy
failed to initialize KVM: Operation not permitted
This is the same problem as before. KVM is broken. Remove the
/dev/kvm file to make it fall back to software emulation.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine. Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/
8:16 a.m.
Hello Rich,
Well, you were correct. I removed the /dev/kvm and it did a lot more. Sadly, I cannot
tell if it was successful. The output file is the same size as when I started, so I am
hesitant to declare success.
Let me know what you think.
Thanks,
Mark
Thanks,
Mark Husted
770-236-1242
-----Original Message-----
From: Richard W.M. Jones [mailto:rjones@redhat.com]
Sent: Friday, August 22, 2014 9:07 AM
To: Mark Husted (hustedm)
Cc: libguestfs(a)redhat.com
Subject: Re: [Libguestfs] libguest-test-tool error report
On Fri, Aug 22, 2014 at 01:03:39PM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
Well, I did give that a try. But it is back to being unable to access kvm (log
attached). It did make the qemu error go away.
kvm_create_vm: Device or resource busy failed to initialize KVM:
Operation not permitted
This is the same problem as before. KVM is broken. Remove the /dev/kvm file to make it
fall back to software emulation.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my
programming and virtualization blog: http://rwmj.wordpress.com virt-df lists disk usage of
guests without needing to install any software inside the virtual machine. Supports Linux
and Windows.
http://people.redhat.com/~rjones/virt-df/
8:33 a.m.
On Fri, Aug 22, 2014 at 01:16:24PM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
Well, you were correct. I removed the /dev/kvm and it did a lot
more. Sadly, I cannot tell if it was successful. The output file
is the same size as when I started, so I am hesitant to declare
success.
Let me know what you think.
It failed. Seems to be a problem with the partition table in the
source image. That could be caused by almost anything, including
incompatible qcow2 variants, general disk corruption, an actual bad
partition table, ...
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines. Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v
8:45 a.m.
Hello Rich,
Well, then I am going to abandon that image.
Again, thank you for your time and patience.
-Mark
Thanks,
Mark Husted
770-236-1242
-----Original Message-----
From: Richard W.M. Jones [mailto:rjones@redhat.com]
Sent: Friday, August 22, 2014 9:34 AM
To: Mark Husted (hustedm)
Cc: libguestfs(a)redhat.com
Subject: Re: [Libguestfs] libguest-test-tool error report
On Fri, Aug 22, 2014 at 01:16:24PM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
Well, you were correct. I removed the /dev/kvm and it did a lot more.
Sadly, I cannot tell if it was successful. The output file is the
same size as when I started, so I am hesitant to declare success.
Let me know what you think.
It failed. Seems to be a problem with the partition table in the source image. That
could be caused by almost anything, including incompatible qcow2 variants, general disk
corruption, an actual bad partition table, ...
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my
programming and virtualization blog: http://rwmj.wordpress.com virt-p2v converts physical
machines to virtual machines. Boot with a live CD or over the network (PXE) and turn
machines into KVM guests.
http://libguestfs.org/virt-v2v
9:41 p.m.
Hey Rich,
I added some more libvirt packages that seemed to be missing. Added the /dev/kvm node
back... and still no luck. I have attached the latest errors from running virt-resize.
I did notice that a call to 'qemu-kvm' is unhappy about the qcow2 format? It
looks like it can only do version 3? I am not sure that makes sense.
Also, my RHEL Desktop was recently upgraded from the 6.3 channel to the 6.5 channel.
Again, not sure if this matters.
Thanks,
Mark
Thanks,
Mark Husted
770-236-1242
-----Original Message-----
From: Richard W.M. Jones [mailto:rjones@redhat.com]
Sent: Thursday, August 21, 2014 4:34 PM
To: Mark Husted (hustedm)
Cc: libguestfs(a)redhat.com
Subject: Re: [Libguestfs] libguest-test-tool error report
On Thu, Aug 21, 2014 at 08:20:11PM +0000, Mark Husted (hustedm) wrote:
Hello Rich,
I am not sure if KVM ever ran. I put VirtualBox in it because I have
never done virtualization before and found some instructions for VB.
That said, I might have naively shut something off because I didn't
know any better. No VB was not running at the time. I thought of
that and turned it off. Though, I bet the services are still up.
What is the standard kvm service? I could check to see if it is
running properly. And we could go from there.
There's not really a "KVM service" as such. It is a part of the kernel is
only used when you start a KVM guest.
In any case as it looks like you have VirtualBox running, my advice would be to delete the
/dev/kvm file, and try running libguestfs-test-tool and/or virt-resize again.
sudo rm /dev/kvm
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my
programming and virtualization blog: http://rwmj.wordpress.com libguestfs lets you edit
virtual machines. Supports shell scripting, bindings from many languages.
http://libguestfs.org
3761
days inactive
3762
days old
13 comments
2 participants
participants (2)
-
Mark Husted (hustedm) -
Richard W.M. Jones