On Tue, Jul 30, 2019 at 04:37:59PM -0500, Eric Blake wrote:
Where qemu-img 4.0 used to say 'virtual size: 100M', the 4.1 release now says 'virtual size: 100 MiB'. Similarly, '5.0G' turned into '5 GiB'. But rather than worry about potential future changes to the human-readable output, we can just use --output=json (at which point we no longer even have to force qemu-img to the C locale). It might be slightly more robust to find our specific information using jq, but for now a grep of the output json is still reliable enough for our needs.
If the '\b' is a problem on BSD, we could use '([, ]|$)' instead. Or that's where jq would make it easier to parse off a given number without worrying about what comes after the number.
Signed-off-by: Eric Blake <eblake@redhat.com> ---
We could still use jq if desired, but it was easy enough to let these tests pass instead of skip when jq is not present.
Yes interesting that we can do this without using jq. It all looks fine, so ACK. Thanks, Rich.
tests/test-ip.sh | 10 ++++++---- tests/test-nbd-tls-psk.sh | 6 +++--- tests/test-nbd-tls.sh | 6 +++--- tests/test-tls-psk.sh | 7 +++---- tests/test-tls.sh | 7 +++---- tests/test-truncate3.sh | 4 ++-- 6 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/tests/test-ip.sh b/tests/test-ip.sh index 636d3d3f..5a00a2ec 100755 --- a/tests/test-ip.sh +++ b/tests/test-ip.sh @@ -57,15 +57,17 @@ kill -s 0 $pid # Check we can connect over the IPv4 loopback interface. ipv4_lo="$(ip -o -4 addr show scope host)" if test -n "$ipv4_lo"; then - qemu-img info --image-opts "file.driver=nbd,file.host=127.0.0.1,file.port=$port" > ipv4.out + qemu-img info --output=json \ + --image-opts "file.driver=nbd,file.host=127.0.0.1,file.port=$port" > ipv4.out cat ipv4.out - grep -sq "^virtual size: 100M" ipv4.out + grep -sq '"virtual-size": *104857600\b' ipv4.out fi
# Check we can connect over the IPv6 loopback interface. ipv6_lo="$(ip -o -6 addr show scope host)" if test -n "$ipv6_lo"; then - qemu-img info --image-opts "file.driver=nbd,file.host=::1,file.port=$port" > ipv6.out + qemu-img info --output=json \ + --image-opts "file.driver=nbd,file.host=::1,file.port=$port" > ipv6.out cat ipv6.out - grep -sq "^virtual size: 100M" ipv6.out + grep -sq '"virtual-size": *104857600\b' ipv6.out fi diff --git a/tests/test-nbd-tls-psk.sh b/tests/test-nbd-tls-psk.sh index d0bbc468..82822d11 100755 --- a/tests/test-nbd-tls-psk.sh +++ b/tests/test-nbd-tls-psk.sh @@ -73,9 +73,9 @@ LIBNBD_DEBUG=1 start_nbdkit -P "$pid2" -U "$sock2" --tls=off \ nbd tls=require tls-psk=keys.psk tls-username=qemu socket="$sock1"
# Run unencrypted client -LANG=C qemu-img info -f raw "nbd+unix:///?socket=$sock2" > nbd-tls-psk.out +qemu-img info --output=json -f raw "nbd+unix:///?socket=$sock2" > nbd-tls-psk.out
cat nbd-tls-psk.out
-grep -sq "^file format: raw" nbd-tls-psk.out -grep -sq "^virtual size: 100M" nbd-tls-psk.out +grep -sq '"format": *"raw"' nbd-tls-psk.out +grep -sq '"virtual-size": *104857600\b' nbd-tls-psk.out diff --git a/tests/test-nbd-tls.sh b/tests/test-nbd-tls.sh index af824d23..c4f4faca 100755 --- a/tests/test-nbd-tls.sh +++ b/tests/test-nbd-tls.sh @@ -74,9 +74,9 @@ LIBNBD_DEBUG=1 start_nbdkit -P "$pid2" -U "$sock2" --tls=off \ nbd tls=require tls-certificates="$pkidir" socket="$sock1"
# Run unencrypted client -LANG=C qemu-img info -f raw "nbd+unix:///?socket=$sock2" > nbd-tls.out +qemu-img info --output=json -f raw "nbd+unix:///?socket=$sock2" > nbd-tls.out
cat nbd-tls.out
-grep -sq "^file format: raw" nbd-tls.out -grep -sq "^virtual size: 100M" nbd-tls.out +grep -sq '"format": *"raw"' nbd-tls.out +grep -sq '"virtual-size": *104857600\b' nbd-tls.out diff --git a/tests/test-tls-psk.sh b/tests/test-tls-psk.sh index 393f5893..a4ecb604 100755 --- a/tests/test-tls-psk.sh +++ b/tests/test-tls-psk.sh @@ -72,12 +72,11 @@ start_nbdkit -P tls-psk.pid -p $port -n \ --tls=require --tls-psk=keys.psk example1
# Run qemu-img against the server. -LANG=C \ -qemu-img info \ +qemu-img info --output=json \ --object "tls-creds-psk,id=tls0,endpoint=client,dir=$PWD" \ --image-opts "file.driver=nbd,file.host=localhost,file.port=$port,file.tls-creds=tls0" > tls-psk.out
cat tls-psk.out
-grep -sq "^file format: raw" tls-psk.out -grep -sq "^virtual size: 100M" tls-psk.out +grep -sq '"format": *"raw"' tls-psk.out +grep -sq '"virtual-size": *104857600\b' tls-psk.out diff --git a/tests/test-tls.sh b/tests/test-tls.sh index 70d40aea..2718e552 100755 --- a/tests/test-tls.sh +++ b/tests/test-tls.sh @@ -65,12 +65,11 @@ start_nbdkit -P tls.pid -p $port -n --tls=require \ --tls-certificates="$pkidir" example1
# Run qemu-img against the server. -LANG=C \ -qemu-img info \ +qemu-img info --output=json \ --object "tls-creds-x509,id=tls0,endpoint=client,dir=$pkidir" \ --image-opts "file.driver=nbd,file.host=localhost,file.port=$port,file.tls-creds=tls0" > tls.out
cat tls.out
-grep -sq "^file format: raw" tls.out -grep -sq "^virtual size: 100M" tls.out +grep -sq '"format": *"raw"' tls.out +grep -sq '"virtual-size": *104857600\b' tls.out diff --git a/tests/test-truncate3.sh b/tests/test-truncate3.sh index 0a7fba8b..885d58f0 100755 --- a/tests/test-truncate3.sh +++ b/tests/test-truncate3.sh @@ -50,8 +50,8 @@ start_nbdkit -P truncate3.pid -U $sock \ pattern 5G \ round-up=512
-LANG=C qemu-img info nbd:unix:$sock > truncate3.out -if ! grep "virtual size: 5.0G" truncate3.out; then +qemu-img info --output=json nbd:unix:$sock > truncate3.out +if ! grep '"virtual-size": *5368709120' truncate3.out; then echo "$0: unexpected output from truncate3 regression test:" cat truncate3.out exit 1 -- 2.20.1
_______________________________________________ Libguestfs mailing list Libguestfs@redhat.com https://www.redhat.com/mailman/listinfo/libguestfs
-- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com Fedora Windows cross-compiler. Compile Windows programs, test, and build Windows installers. Over 100 libraries supported. http://fedoraproject.org/wiki/MinGW