The autopoint generated make infrastructure doesn't handle perl. It's also unfathomably complicated. This patch replaces it with the much simpler infrastructure from the libintl-perl sample application. This also fixes the generation of virt-v2v.pot. --- .gitignore | 17 ---- README-NLS | 200 ++++++++++++++++++++++++++++++++++++++++ autogen.sh | 16 --- configure.ac | 7 +- po/Makefile | 97 ++++++++++++++++++++ po/PACKAGE | 14 +++ po/POTFILES.in | 12 ++- po/virt-v2v.pot | 272 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 8 files changed, 595 insertions(+), 40 deletions(-) create mode 100644 README-NLS delete mode 100644 po/LINGUAS create mode 100644 po/Makefile create mode 100644 po/PACKAGE create mode 100644 po/virt-v2v.pot delete mode 100644 po/virtv2v.pot diff --git a/.gitignore b/.gitignore index 68f552e..a870fc2 100644 --- a/.gitignore +++ b/.gitignore @@ -23,23 +23,6 @@ perl/Makefile-pl.old perl/Makefile.PL perl/pm_to_blib -po/*.gmo -po/Makevars.template -po/POTFILES -po/remove-potcdate.sed -po/stamp-it -po/stamp-po -po/LINGUAS -po/Makefile.in.in -po/Makevars -po/Rules-quot -po/boldquot.sed -po/en@boldquot.header -po/en@quot.header -po/insert-header.sin -po/quot.sed -po/remove-potcdate.sin - v2v/virt-v2v.1 v2v/virt-v2v.conf.5 v2v/virt-v2v.pl diff --git a/README-NLS b/README-NLS new file mode 100644 index 0000000..9f77651 --- /dev/null +++ b/README-NLS @@ -0,0 +1,200 @@ +Notes on National Language Support (NLS) +**************************************** + +This package is internationalized with libintl-perl, a free +internationalization library for Perl, you will need to install a copy of +libintl-perl in order to use the package. You can get libintl-perl from the +Comprehensive Perl Archive Network CPAN at http://www.cpan.org/. + +The following notes are meant to be a quick start guide for somewhat +experienced users and system administrators and many important details had to +be omitted for brevity. If you have any difficulties with the +internationalization features of this package, no matter if you are a +programmer, a translator, or an end user, feel free to ask at the mailing list +for libintl-perl. To do so, send an e-mail to the address +<libintl-perl AT imperia DOT net> (please replace "AT" with a "@", and "DOT" +with a dot "."). + +You can subscribe to this list at + + http://ml.imperia.org/mailman/listinfo/libintl-perl + +A searchable archive of earlier postings is located at + + http://ml.imperia.org/libintl-perl/ + +You may already find an answer to your question there. + +Feel free to include this document in your own Perl packages internationalized +with libintl-perl, no severe copyright restrictions apply. You should send +corrections or improvements to the author Guido Flohr <guido AT imperia DOT +net>, so that others can benefit from your changes. + +The End User's View +=================== + +The installation routine for this package will automatically take care that +your system has a sufficient version of libintl-perl installed. This is +basically sufficient for proper operation, but - especially if +internationalized software is new to you - you should read on carefully in +order to fully benefit from the internationalization (I18N) features of this +package. + +Perl Setup +---------- + +The I18N library libintl-perl will run with a wide range of Perl versions (at +least from Perl version 5.005_03 to Perl 5.8.0) but you will experience slight +difference in features and performance depending on the version of Perl you +use. + +With Perl versions prior to 5.7.3 you can use the package for all European +scripts (including those with Greek or Cyrillic scripts), and also for many +scripts used outside Europe, like Arabic, Hebrew, Georgian, Vietnamese or +Thai, more general all scripts using 8 bit charsets. Other scripts are only +available if the translations in this package are provided in Unicode and they +can only be output in Unicode. + +Beginning with Perl 5.7.3 the module Encode became part of the Perl core, and +it offers you a much wider range of possible scripts. If you plan to use some +of the lesser used scripts for Chinese, Japanese, and Korean, you should also +install the module Encode::HanExtra. + +Setting Your Language +--------------------- + +Most modern systems are already prepared and configured for +internationalization, and the user interface of the software you have +installed will already be configured for your preferred language. Packages +internationalized with libintl-perl will honor these configuration settings +and will also operate in your preferred language if the necessary translations +are available. + +The environment variable "LANGUAGE" has the highest precedence for +translations. The most common format for this environment variable is a +(lowercase) two-letter language code and an (uppercase) two-letter country +code separated by an underscore "_", for example: + + LANGUAGE=fr_BE + export LANGUAGE + +This will set your language preferences to French ("fr") for Belgium ("BE"). +Other examples are French for France ("fr_FR"), German for Austria ("de_AT"), +and so on. You can also omit the country part ("FR", "DE", "IT", "RU", ...) +in which case a default setting for the country will be assumed. + +If there are no translations available for your selected languages, the +original message (normally in English) will be displayed. + +You can also define a chain of languages to be tried separated by a colon: + + LANGUAGE=fr_BE:fr_FR:fr:it + +Read this as: "I want translations in French for Belgium. If they are not +available try French for France, then any French translation, and finally +Italian". Please note that this chain notation is only allowed for the +environment variable "LANGUAGE", it is not valid for any of the following +variables. + +If "LANGUAGE" is not set, the library checks the variable "LANG". It has the +same syntax as "LANGUAGE" but does not allow the preferences chain with the +colon syntax. After "LANG" the variable "LC_MESSAGES" (think "locale category +messages") is tried, and finally "LC_ALL". + +Note for Microsoft Windows users: The locale preferences you have configured +for your system cannot yet be evaluated by libintl-perl. This may change for +future versions of libintl-perl but for the moment you have to make do with +the instructions given above. In order to set environment variables, you have +to right-click on the icon "My Computer" on your desktop, select "Properties" +in the context menu, and then click the tab labelled "Environment variables". + +Setting the Output Charset +-------------------------- + +Even if you have managed to properly select your preferred language, you may +still have difficulties reading the program languages, because libintl-perl +was unable to determine the correct charset to use for messages. For example, +it may assume Unicode ("UTF-8") but you really need ISO-Latin-1 (also known as +"Latin-1" or "ISO-8859-1"). If this is the case, please set the environment +variable "OUTPUT_CHARSET" to the appropriate value, for example: + + OUTPUT_CHARSET=iso-8859-1 + export OUTPUT_CHARSET + +Charset names are case-insensitive, i. e. "LATIN-1" is the equivalent to +"Latin-1" or even "lAtIn-1". + +Note: The output charset "utf8" is NOT recognized. Please use the correct +abbreviation "utf-8" (with a hyphen) instead. + +The Translator's View +===================== + +If you want to contribute a new translation to this package, please contact +the author first. Somebody may have already started this translation, and +furthermore the package author will be able to give you detailled instructions +and help. + +Translating a Perl package is not much work and it does not require any +technical skills. If you are able to use the software itself, you will also +be able to contribute a translation for your language. But why should you do +that? You are able to read and understand this text and you will also be able +to understand the English messages that the software spits out by default. + +Computers are an integral part of today's society. Computers are used to +explore new sources of information, forbidding computers would be a modern +form of censorship. Computers may also improve social life, the internet +helps people to find contacts in their area and all over the world, even if +they would otherwise be deprived from that because of a handicap, lack of money +for traveling, or other reasons. In many societies, the ability to use and +handle a computer also has a strong impact on your perspectives in life, you +may not be able to find an adequate job because of your lack of computer +experience, or you may even lose your job because of that. + +Everybody should benefit from computers, regardless of cultural +background. Computers are expansive goods, and their price is already a high +barrier to cross. If computers speak in a foreign language, the learning +curve gets steeper and the barrier gets even higher. You can help the people +that share your native language by contributing a translation. The author of +this package has already prepared everything, the rest is up to you! + +The Programmer's View +===================== + +You have downloaded this package because you want to use it in your own +project(s). The fact that the package is internationalized with libintl-perl +does not affect its usability in any way. But you should keep in mind that +textual messages produced by the package may change according to the locale +settings at run-time. This can lead to errors. For example, if you parse +error messages produced by the package, you will most probably fail to detect +what you are looking for, if these error messages are suddenly presented in +another language or another output charset. + +It is probably needless to say that this is bad practice and an indicator for +a poorly written interface. Either you have missed the correct method for +determining the substance of the message in a locale-independent manner, or +the author of the package has mis-designed the package interface. In any +case, this is a technical problem that should be solved by technicians. You +should not put that burden on the shoulders of your users but rather solve the +problem in cooperation with the author of the module that causes it. + +If this is absolutely impossible, as a temporary workaround you can completely +switch off the native language support of the package by setting the +environment variable "LANGUAGE" to the special value "C": + + BEGIN { + $ENV{LANGUAGE} = $ENV{LANG} = "C"; + } + +The value "C" instructs libintl-perl to leave all messages untouched, and you +can use the package as if it was not internationalized at all. + +If the project you are working on is not yet internationalized, you should +consider to prepare it for internationalization now. Doing so is only little +work for yourself, but results in a large benefit for the users of your +software. The package "libintl-perl" ships with exhaustive documentation for +programmers and a sample package that you can use as a skeleton for your own +project(s). Internationalizing Perl software with libintl-perl is easy, the +package that this file is a part of, prooves that. + +Guido Flohr diff --git a/autogen.sh b/autogen.sh index 81bc944..f47dad5 100755 --- a/autogen.sh +++ b/autogen.sh @@ -21,22 +21,6 @@ set -e set -v -# Run autopoint, to get po/Makevars.template: -autopoint - -# Create gettext configuration. -echo "$0: Creating po/Makevars from po/Makevars.template ..." -rm -f po/Makevars -sed ' - /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/ - /^MSGID_BUGS_ADDRESS *=/s/=.*/= '"$MSGID_BUGS_ADDRESS"'/ - /^XGETTEXT_OPTIONS *=/{ - s/$/ \\/ - a\ - '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+} - } -' po/Makevars.template >po/Makevars - autoreconf -i CONFIGUREDIR=. diff --git a/configure.ac b/configure.ac index 6a6ad13..b8d49d4 100644 --- a/configure.ac +++ b/configure.ac @@ -52,10 +52,6 @@ AC_PATH_PROGS([MKISOFS],[mkisofs],[no], [$PATH$PATH_SEPARATOR/usr/sbin$PATH_SEPARATOR/sbin]) test "x$MKISOFS" = "xno" && AC_MSG_ERROR([mkisofs must be installed]) -dnl For i18n. -AM_GNU_GETTEXT([external]) -AM_GNU_GETTEXT_VERSION([0.14]) - dnl Check for Perl AC_CHECK_PROG([PERL],[perl],[perl],[no]) test "x$PERL" = "xno" && @@ -82,6 +78,5 @@ AC_CONFIG_FILES([Makefile snapshot/Makefile snapshot/virt-snapshot.pl v2v/Makefile - v2v/virt-v2v.pl - po/Makefile.in]) + v2v/virt-v2v.pl]) AC_OUTPUT diff --git a/po/LINGUAS b/po/LINGUAS deleted file mode 100644 index e69de29..0000000 diff --git a/po/Makefile b/po/Makefile new file mode 100644 index 0000000..6fb37b1 --- /dev/null +++ b/po/Makefile @@ -0,0 +1,97 @@ +# Makefile for various po files. + +srcdir = . +libdir = ../lib + +#CATALOGS = $(addsuffix .po, LINGUAS) +CATALOGS = $(LINGUAS) +MO_FILES = $(addsuffix .mo, $(LINGUAS)) + +MSGMERGE = msgmerge +MSGFMT = msgfmt +XGETTEXT = xgettext +CATOBJEXT = .po + +include PACKAGE + +TD = $(strip $(TEXTDOMAIN)) + +default: help + +all: $(TD).pot update-po update-mo install + +help: + @echo "Available targets:" + @echo " pot - remake master catalog" + @echo " update-po - merge po files" + @echo " update-mo - regenerate mo files" + @echo " install - install mo files" + @echo " all - all of the above" + +POTFILES = $(srcdir)/POTFILES.in \ + $(shell cat $(srcdir)/POTFILES.in) + +pot: $(TD).pot + +clean: + rm -f *~ *.bak *.mo + +# FIXME: The parameter --from-code is only needed if your sources contain +# any 8 bit data (even in comments). UTF-8 is only a guess here, but it +# will at least accept any 8 bit data. +# +# The parameter "--language=perl" is not strictly needed because the +# source language of all our files will be auto-detected by xgettext +# by their filename extension. You should even avoid this parameter +# if you want to extract strings from multiple source languages. +$(TD).pot: $(POTFILES) + $(XGETTEXT) --output=$(srcdir)/$(TD).pox --from-code=utf-8 \ + --add-comments=TRANSLATORS: --files-from=$(srcdir)/POTFILES.in \ + --copyright-holder="$(COPYRIGHT_HOLDER)" \ + --msgid-bugs-address="$(MSGID_BUGS_ADDRESS)" \ + --keyword --keyword='$$__' --keyword=__ --keyword=__x \ + --keyword=__n:1,2 --keyword=__nx:1,2 --keyword=__xn:1,2 \ + --keyword=__p:1c,2 --keyword=__np:1c,2,3 \ + --keyword=__npx:1c,2,3 --keyword=N__ --keyword=N__n:1,2 \ + --keyword=N__p:1c,2 --keyword=N__np:1c,2,3 --keyword=%__ \ + --language=perl && \ + rm -f $@ && mv $(TD).pox $@ + +install: $(MO_FILES) + cd $(srcdir); \ + targetdir='$(libdir)/LocaleData'; \ + languages='$(LINGUAS)'; \ + for lang in $$languages; do \ + mkdir -p "$$targetdir/$$lang/LC_MESSAGES" || exit 1; \ + dest="$$targetdir/$$lang/LC_MESSAGES/$(TD).mo"; \ + cat="$$lang.mo"; \ + echo "installing $$cat as $$dest"; \ + cp -f $$cat $$dest && chmod 644 $$dest || exit 1; \ + done + +update-mo: $(MO_FILES) + +update-po: + $(MAKE) $(TD).pot + cd $(srcdir); \ + catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \ + mv $$lang.po $$lang.old.po; \ + echo "$$lang:"; \ + if $(MSGMERGE) $$lang.old.po $(TD).pot -o $$lang.po; then \ + rm -f $$lang.old.po; \ + else \ + echo "msgmerge for $$cat failed!"; \ + rm -f $$lang.po; \ + mv $$lang.old.po $$lang.po; \ + fi; \ + done + +.SUFFIXES: +.SUFFIXES: .po .mo + +.po.mo: + $(MSGFMT) --check --statistics --verbose -o $@ $< + diff --git a/po/PACKAGE b/po/PACKAGE new file mode 100644 index 0000000..ae8deb2 --- /dev/null +++ b/po/PACKAGE @@ -0,0 +1,14 @@ +# Makefile snippet that holds all package-dependent information. + +# Add more languages here! Beware that this is a makefile snippet and +# you have to adhere to make syntax. +LINGUAS = + +# Textdomain for our package. +TEXTDOMAIN = virt-v2v + +# Initial copyright holder added to pot and po files. +COPYRIGHT_HOLDER = Red Hat Inc. + +# Where to send msgid bugs? +MSGID_BUGS_ADDRESS = libguestfs@redhat.com diff --git a/po/POTFILES.in b/po/POTFILES.in index 02402db..488e8f3 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -1 +1,11 @@ -v2v/virt-v2v.pl +../perl/lib/Sys/VirtV2V/GuestOS.pm +../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm +../perl/lib/Sys/VirtV2V/HVSource.pm +../perl/lib/Sys/VirtV2V/HVSource/Xen/Linux.pm +../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm +../perl/lib/Sys/VirtV2V/HVTarget.pm +../perl/lib/Sys/VirtV2V/MetadataReader/LibVirt.pm +../perl/lib/Sys/VirtV2V/MetadataReader/LibVirtXML.pm +../perl/lib/Sys/VirtV2V/MetadataReader.pm +../snapshot/virt-snapshot.pl +../v2v/virt-v2v.pl diff --git a/po/virt-v2v.pot b/po/virt-v2v.pot new file mode 100644 index 0000000..843d43d --- /dev/null +++ b/po/virt-v2v.pot @@ -0,0 +1,272 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR Red Hat Inc. +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: libguestfs@redhat.com\n" +"POT-Creation-Date: 2009-09-02 13:01+0100\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: ../perl/lib/Sys/VirtV2V/GuestOS.pm:160 +#, perl-brace-format +msgid "WARNING unable to access {path}." +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:120 +msgid "/etc/selinux/config does not exist" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:132 +msgid "Didn't find SELINUXTYPE n /etc/syslinux/config" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:141 +#, perl-brace-format +msgid "Unable to find an SELinux policy file matching {path}" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:162 +msgid "Unable to successfully load an SELinux policy" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:209 +msgid "Unable to find any valid modprobe configuration" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:393 +msgid "Unable to find a default kernel" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:437 +#, perl-brace-format +msgid "{filename} doesn't contain a valid kernel\n" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:491 +msgid "Unable to determine a kernel architecture" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:561 +#, perl-brace-format +msgid "Found dependency loop installing {label}: {path}" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:755 +#, perl-brace-format +msgid "No {object} given matching {label}\n" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:772 +msgid "file" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:790 +msgid "alias" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:808 +msgid "dependencies" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:876 +#, perl-brace-format +msgid "No mapping found for block device {device}" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:930 +#, perl-brace-format +msgid "Didn't find a grub entry for kernel version {version}" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/GuestOS/RedHat.pm:935 +#, perl-brace-format +msgid "WARNING: Kernel version {version} doesn't have an initrd entry in grub" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:128 +#, perl-brace-format +msgid "{name} configured with virtio drivers" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:130 +#, perl-brace-format +msgid "{name} configured without virtio drivers" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:228 +#, perl-brace-format +msgid "" +"WARNING: Don't know how to update {module}, which loads the {module} " +"module.\n" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:324 +msgid "" +"No bootable kernels installed, and no replacement specified in " +"configuration.\n" +"Unable to continue" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:452 +#, perl-brace-format +msgid "" +"WARNING: No replacement found for {xpath} in domain XML. The node was " +"removed." +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:503 +#, perl-brace-format +msgid "The connected hypervisor does not support a {arch} kvm guest" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:533 +#, perl-brace-format +msgid "The connected hypervisor does not support a machine type of {machine}." +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget/Linux.pm:551 +#, perl-brace-format +msgid "The connected hypervisor does not support feature {feature}" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/HVTarget.pm:67 +msgid "Unable to find a module to configure this guest" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/MetadataReader/LibVirt.pm:107 +#, perl-brace-format +msgid "{name} isn't a valid guest name" +msgstr "" + +#: ../perl/lib/Sys/VirtV2V/MetadataReader/LibVirtXML.pm:84 +#, perl-brace-format +msgid "WARNING unknown configuration directive {directive} in {name} section" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:185 +msgid "--commit and --rollback are mutually exclusive" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:194 +msgid "no guest argument given" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:199 +#, perl-brace-format +msgid "{input} is not a valid input format" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:239 +msgid "No resulting domain" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:251 +#, perl-brace-format +msgid "Unable to open {file}: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:261 ../snapshot/virt-snapshot.pl:293 +#, perl-brace-format +msgid "Error closing {file}: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:265 ../snapshot/virt-snapshot.pl:296 +#, perl-brace-format +msgid "Wrote output to {file}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:283 +#, perl-brace-format +msgid "Unable to create guest: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:285 +msgid "Consider using the --outputxml option" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:331 +#, perl-brace-format +msgid "Unable to create virt-snapshot storage pool: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:349 +#, perl-brace-format +msgid "Unable to start virt-snapshot storage pool: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:359 +msgid "virt-snapshot storage pool is temporarily unavailable" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:494 +#, perl-brace-format +msgid "Failed to commit snapshot '{path}' to backing store '{backingstore}'" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:522 +#, perl-brace-format +msgid "" +"A snapshot already exists for {guest}. You must commit it or roll it back " +"back before creating a new snapshot." +msgstr "" + +#: ../snapshot/virt-snapshot.pl:531 +#, perl-brace-format +msgid "Unable to write to {path}: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:537 +#, perl-brace-format +msgid "Error closing {path}: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:569 +#, perl-brace-format +msgid "Unable to create storage volume: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:602 +#, perl-brace-format +msgid "Refusing to rollback guest {name} without backed-up xml" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:613 +#, perl-brace-format +msgid "Failed to delete {file}: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:624 +#, perl-brace-format +msgid "Unable to delete backup xml file {file}: {error}" +msgstr "" + +#: ../snapshot/virt-snapshot.pl:686 +#, perl-brace-format +msgid "invalid source element: {element}" +msgstr "" + +#: ../v2v/virt-v2v.pl:147 +msgid "virt-v2v: no guest argument given" +msgstr "" + +#: ../v2v/virt-v2v.pl:164 +#, perl-brace-format +msgid "virt-v2v: {input} is not a valid metadata format" +msgstr "" + +#: ../v2v/virt-v2v.pl:259 +msgid "no root device found in this operating system image" +msgstr "" + +#: ../v2v/virt-v2v.pl:260 +msgid "multiboot operating systems are not supported by v2v" +msgstr "" diff --git a/po/virtv2v.pot b/po/virtv2v.pot deleted file mode 100644 index e69de29..0000000 -- 1.6.2.5