Add a new --operation parameter which, similarly to --enable, can be used to enable operations, but also to remove them, and to add/remove the default operations and all the available ones. --- sysprep/main.ml | 36 +++++++++++++++++++++++++++ sysprep/sysprep_operation.ml | 24 ++++++++++++++++++ sysprep/sysprep_operation.mli | 21 ++++++++++++++++ sysprep/virt-sysprep.pod | 57 +++++++++++++++++++++++++++++++++++++------ 4 files changed, 131 insertions(+), 7 deletions(-) diff --git a/sysprep/main.ml b/sysprep/main.ml index 689a394..49750a9 100644 --- a/sysprep/main.ml +++ b/sysprep/main.ml @@ -87,6 +87,40 @@ let debug_gc, operations, g, selinux_relabel, quiet, mount_opts = exit 1 ) Sysprep_operation.empty_set ops in operations := Some opset + and set_operations op_string = + let currentopset = + match !operations with + | Some x -> x + | None -> Sysprep_operation.empty_set + in + let ops = string_nsplit "," op_string in + let opset = List.fold_left ( + fun opset op_name -> + let op = + if string_prefix op_name "-" then + `Remove (String.sub op_name 1 (String.length op_name - 1)) + else + `Add op_name in + match op with + | `Add "" | `Remove "" -> + eprintf (f_"%s: --operations: empty operation name\n") + prog; + exit 1 + | `Add "defaults" -> Sysprep_operation.add_defaults_to_set opset + | `Remove "defaults" -> Sysprep_operation.remove_defaults_from_set opset + | `Add "all" -> Sysprep_operation.add_all_to_set opset + | `Remove "all" -> Sysprep_operation.remove_all_from_set opset + | `Add n | `Remove n -> + let f = match op with + | `Add n -> Sysprep_operation.add_to_set + | `Remove n -> Sysprep_operation.remove_from_set in + try f n opset with + | Not_found -> + eprintf (f_"%s: --operations: '%s' is not a known operation\n") + prog n; + exit 1 + ) currentopset ops in + operations := Some opset and force_selinux_relabel () = selinux_relabel := `Force and no_force_selinux_relabel () = @@ -114,6 +148,8 @@ let debug_gc, operations, g, selinux_relabel, quiet, mount_opts = "--list-operations", Arg.Unit list_operations, " " ^ s_"List supported operations"; "--long-options", Arg.Unit display_long_options, " " ^ s_"List long options"; "--mount-options", Arg.Set_string mount_opts, s_"opts" ^ " " ^ s_"Set mount options (eg /:noatime;/var:rw,noatime)"; + "--operation", Arg.String set_operations, " " ^ s_"Enable/disable specific operations"; + "--operations", Arg.String set_operations, " " ^ s_"Enable/disable specific operations"; "-q", Arg.Set quiet, " " ^ s_"Don't print log messages"; "--quiet", Arg.Set quiet, " " ^ s_"Don't print log messages"; "--selinux-relabel", Arg.Unit force_selinux_relabel, " " ^ s_"Force SELinux relabel"; diff --git a/sysprep/sysprep_operation.ml b/sysprep/sysprep_operation.ml index 1fb4f17..572a65f 100644 --- a/sysprep/sysprep_operation.ml +++ b/sysprep/sysprep_operation.ml @@ -68,10 +68,34 @@ type set = OperationSet.t let empty_set = OperationSet.empty +let opset_of_oplist li = + List.fold_left ( + fun acc elem -> + OperationSet.add elem acc + ) empty_set li + let add_to_set name set = let op = List.find (fun { name = n } -> name = n) !all_operations in OperationSet.add op set +let add_defaults_to_set set = + OperationSet.union set (opset_of_oplist !enabled_by_default_operations) + +let add_all_to_set set = + opset_of_oplist !all_operations + +let remove_from_set name set = + let name_filter = fun { name = n } -> name = n in + if List.exists name_filter !all_operations <> true then + raise Not_found; + OperationSet.diff set (OperationSet.filter name_filter set) + +let remove_defaults_from_set set = + OperationSet.diff set (opset_of_oplist !enabled_by_default_operations) + +let remove_all_from_set set = + empty_set + let register_operation op = all_operations := op :: !all_operations; if op.enabled_by_default then diff --git a/sysprep/sysprep_operation.mli b/sysprep/sysprep_operation.mli index 16eee64..61dde72 100644 --- a/sysprep/sysprep_operation.mli +++ b/sysprep/sysprep_operation.mli @@ -128,6 +128,27 @@ val add_to_set : string -> set -> set Note that this will raise [Not_found] if [name] is not a valid operation name. *) +val add_defaults_to_set : set -> set +(** [add_defaults_to_set set] adds to [set] all the operations enabled + by default. *) + +val add_all_to_set : set -> set +(** [add_all_to_set set] adds to [set] all the available operations. *) + +val remove_from_set : string -> set -> set +(** [remove_from_set name set] remove the operation named [name] from [set]. + + Note that this will raise [Not_found] if [name] is not + a valid operation name. *) + +val remove_defaults_from_set : set -> set +(** [remove_defaults_from_set set] removes from [set] all the operations + enabled by default. *) + +val remove_all_from_set : set -> set +(** [remove_all_from_set set] removes from [set] all the available + operations. *) + val perform_operations_on_filesystems : ?operations:set -> ?quiet:bool -> Guestfs.guestfs -> string -> flag list (** Perform all operations, or the subset listed in the [operations] set. *) diff --git a/sysprep/virt-sysprep.pod b/sysprep/virt-sysprep.pod index afabcc9..a042db4 100755 --- a/sysprep/virt-sysprep.pod +++ b/sysprep/virt-sysprep.pod @@ -107,6 +107,47 @@ version of virt-sysprep. See L</OPERATIONS> below for a list and an explanation of each operation. +=item B<--operation> operations + +=item B<--operations> operations + +Choose which sysprep operations to perform. Give a comma-separated +list of operations, for example: + + --operations ssh-hostkeys,udev-persistent-net + +would enable ONLY C<ssh-hostkeys> and C<udev-persistent-net> operations. + +I<--operations> allows you to enable and disable any operation, including +the default ones (which would be tried when specifying neither +I<--operations> nor I<--enable>) and all the available ones; prepending +a C<-> in front of an operation name removes it from the list of enabled +operations, while the meta-names C<defaults> and C<all> represent +respectively the operations enabled by default and all the available ones. +For example: + + --operations delete,defaults,-hostname + +would enable the C<delete> operation (regardless whether it is enabled by +default), all the default ones, and disable the C<hostname> operation. + +I<--operations> can be specified multiple times; the first time the set +of enabled operations is empty, while any further I<--operations> affects +the operations enabled so far. + +If the I<--operations> option is not given, then we default to trying most +sysprep operations (see I<--list-operations> to show which are +enabled). + +Regardless of the I<--operations> option, sysprep operations are skipped +for some guest types. + +Use I<--list-operations> to list operations supported by a particular +version of virt-sysprep. + +See L</OPERATIONS> below for a list and an explanation of each +operation. + =item B<--format> raw|qcow2|.. =item B<--format> auto @@ -209,24 +250,26 @@ __EXTRA_OPTIONS__ =head1 OPERATIONS -If the I<--enable> option is I<not> given, then most sysprep -operations are enabled. +If the I<--enable>/I<--operations> option is I<not> given, +then most sysprep operations are enabled. Use C<virt-sysprep --list-operations> to list all operations for your virt-sysprep binary. The ones which are enabled by default are marked -with a C<*> character. Regardless of the I<--enable> option, sysprep -operations are skipped for some guest types. +with a C<*> character. Regardless of the I<--enable>/I<--operations> +options, sysprep operations are skipped for some guest types. -Operations can be individually enabled using the I<--enable> option. +Operations can be individually enabled using the +I<--enable>/I<--operations> options. Use a comma-separated list, for example: - virt-sysprep --enable=ssh-hostkeys,udev-persistent-net [etc..] + virt-sysprep --operations=ssh-hostkeys,udev-persistent-net [etc..] Future versions of virt-sysprep may add more operations. If you are using virt-sysprep and want predictable behaviour, specify only the operations that you want to have enabled. -C<*> = enabled by default when no I<--enable> option is given. +C<*> = enabled by default when no I<--enable>/I<--operations> option +is given. __OPERATIONS__ -- 1.8.3.1