8:18 a.m.
Signed-off-by: Olaf Hering <olaf(a)aepfle.de>
---
Not compile-tested!
appliance/packagelist.in | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/appliance/packagelist.in b/appliance/packagelist.in
index 8a4a5ea..a00a7ad 100644
--- a/appliance/packagelist.in
+++ b/appliance/packagelist.in
@@ -126,11 +126,9 @@ dosfstools
file
findutils
gawk
-gdisk
grep
gzip
jfsutils
-kmod
less
libxml2
lsof
@@ -146,17 +144,14 @@ ocfs2-tools
*/
parted
procps
-procps-ng
psmisc
rsync
-scrub
sed
strace
syslinux
tar
udev
util-linux
-util-linux-ng
#ifndef UBUNTU
/* on Ubuntu contains a file in /lib64 which conflicts with libc6 that has
* /lib64 as a symbolic link
@@ -165,6 +160,14 @@ xfsprogs
#endif
zerofree
+#ifndef SUSE
+gdisk
+kmod
+procps-ng
+scrub
+util-linux-ng
+#endif
+
#ifdef VALGRIND_DAEMON
valgrind
#endif
8:28 a.m.
On Tue, Jun 11, 2013 at 03:18:23PM +0200, Olaf Hering wrote:
Signed-off-by: Olaf Hering <olaf(a)aepfle.de>
---
Not compile-tested!
appliance/packagelist.in | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/appliance/packagelist.in b/appliance/packagelist.in
index 8a4a5ea..a00a7ad 100644
--- a/appliance/packagelist.in
+++ b/appliance/packagelist.in
@@ -126,11 +126,9 @@ dosfstools
file
findutils
gawk
-gdisk
grep
gzip
jfsutils
-kmod
less
libxml2
lsof
@@ -146,17 +144,14 @@ ocfs2-tools
*/
parted
procps
-procps-ng
psmisc
rsync
-scrub
sed
strace
syslinux
tar
udev
util-linux
-util-linux-ng
#ifndef UBUNTU
/* on Ubuntu contains a file in /lib64 which conflicts with libc6 that has
* /lib64 as a symbolic link
@@ -165,6 +160,14 @@ xfsprogs
#endif
zerofree
+#ifndef SUSE
+gdisk
+kmod
+procps-ng
+scrub
+util-linux-ng
+#endif
+
#ifdef VALGRIND_DAEMON
valgrind
#endif
But supermin is supposed to ignore packages that don't exist in the
distro. This is a bug in supermin or the zypp plugin for supermin.
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine. Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/
9:07 a.m.
On Tue, Jun 11, Richard W.M. Jones wrote:
But supermin is supposed to ignore packages that don't exist in
the
distro. This is a bug in supermin or the zypp plugin for supermin.
It looks like zypper has no "ignore unknown packages/provides" flag.
zypper .. install $pkg is called with an unknown package then zypper
will just abort because it expects valid input.
Maybe there should be some code which iterates over "names" and lets
zypper check for every single pkg and drop the ones which it can not
resolve. Later the smaller "names" list can be passed to zypper.
Are other plugins more forgiving in this?
Olaf
9:24 a.m.
On Tue, Jun 11, Olaf Hering wrote:
On Tue, Jun 11, Richard W.M. Jones wrote:
> But supermin is supposed to ignore packages that don't exist in the
> distro. This is a bug in supermin or the zypp plugin for supermin.
Related to this, zypper --xml gives the chance to parse the output. But
doing it all in the shell is cumbersome. Right now there is no output if
something fails.
Whats the best way to do "xml sel -t -m
'stream/install-summary/to-install/solvable[@type='\''package'\'']'
-c
'string(@name)' -n" in ocaml itself? So zypper can write to a tmpfile
and the .ml file can parse the xml output and process it as needed.
There is no obvious way to extract the "pkg not found" other than:
<message type="error">No provider of 'gdisk'
found.</message>
Olaf
10 a.m.
On Tue, Jun 11, 2013 at 04:24:38PM +0200, Olaf Hering wrote:
On Tue, Jun 11, Olaf Hering wrote:
> On Tue, Jun 11, Richard W.M. Jones wrote:
>
> > But supermin is supposed to ignore packages that don't exist in the
> > distro. This is a bug in supermin or the zypp plugin for supermin.
Related to this, zypper --xml gives the chance to parse the output. But
doing it all in the shell is cumbersome. Right now there is no output if
something fails.
Whats the best way to do "xml sel -t -m
'stream/install-summary/to-install/solvable[@type='\''package'\'']'
-c
'string(@name)' -n" in ocaml itself?
Unfortunately there's no best (or even good) way. Two ways are:
- Use an external OCaml library. Ones I would recommend are:
XML Light (very simple), xmlm (not used it but active upstream), or
PXP (very comprehensive but also very masochistic).
- Run the external bash command above and try parsing the output
using regexps or something. Has the possible advantage of not needing
any extra OCaml deps.
Does zypper have a C API? Binding C APIs from OCaml is easy (or
at least much easier than dealing with XML).
So zypper can write to a tmpfile
and the .ml file can parse the xml output and process it as needed.
There is no obvious way to extract the "pkg not found" other than:
<message type="error">No provider of 'gdisk'
found.</message>
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
libguestfs lets you edit virtual machines. Supports shell scripting,
bindings from many languages. http://libguestfs.org
9:53 a.m.
On Tue, Jun 11, 2013 at 04:07:17PM +0200, Olaf Hering wrote:
On Tue, Jun 11, Richard W.M. Jones wrote:
> But supermin is supposed to ignore packages that don't exist in the
> distro. This is a bug in supermin or the zypp plugin for supermin.
It looks like zypper has no "ignore unknown packages/provides" flag.
zypper .. install $pkg is called with an unknown package then zypper
will just abort because it expects valid input.
Maybe there should be some code which iterates over "names" and lets
zypper check for every single pkg and drop the ones which it can not
resolve. Later the smaller "names" list can be passed to zypper.
Are other plugins more forgiving in this?
Yes. For example, the yum/RPM plugin does effectively this:
#!/usr/bin/python
import yum
import yum.misc
import sys
yb = yum.YumBase ()
yb.setCacheDir ()
patterns = ["bash", "notarealpackage"]
pkgs = yb.pkgSack.returnPackages (patterns=patterns, repoid=0)
for pkg in pkgs:
print pkg
... which prints (after ages, for yum is very slow):
bash-4.2.39-3.fc18.x86_64
bash-4.2.45-1.fc18.x86_64
This is a feature of supermin, because it lets you have package lists
that don't need to be heavily conditionalized based on the precise
version of a distro, especially when packages are often being renamed
(like util-linux -> util-linux-ng and back again).
Rich.
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
virt-top is 'top' for virtual machines. Tiny program with many
powerful monitoring features, net stats, disk stats, logging, etc.
http://people.redhat.com/~rjones/virt-top
4063
days inactive
4063
days old
5 comments
2 participants
participants (2)
-
Olaf Hering -
Richard W.M. Jones