[v2v PATCH] input-xen: sync PasswordAuthentication hint from input-vmware manual
Unlike in the VMWare input module, we don't have "remote_file_exists" "scp_from_remote_to_temporary" functions in the Xen input module; therefore, nothing inherently prevents "-ip" from satisfying all ssh password requests when using input-xen. However, the Xen server still needs to permit PasswordAuthentication; sync the appropriate note from the input-vmware manual to the input-xen manual. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1854275 Signed-off-by: Laszlo Ersek <lersek@redhat.com> --- docs/virt-v2v-input-xen.pod | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/docs/virt-v2v-input-xen.pod b/docs/virt-v2v-input-xen.pod index c4948e5e0c23..8080ebea7723 100644 --- a/docs/virt-v2v-input-xen.pod +++ b/docs/virt-v2v-input-xen.pod @@ -19,7 +19,9 @@ RHEL 5 Xen, or SLES and OpenSUSE Xen hosts. You can use SSH password authentication, by supplying the name of a file containing the password to the I<-ip> option (note this option -does I<not> take the password directly). +does I<not> take the password directly). You may need to adjust +F</etc/ssh/sshd_config> on the Xen server to set +C<PasswordAuthentication yes>. If you are not using password authentication, an alternative is to use ssh-agent, and add your ssh public key to -- 2.19.1.3.g30247aa5d201
On Sat, Apr 09, 2022 at 08:55:12AM +0200, Laszlo Ersek wrote:
Unlike in the VMWare input module, we don't have "remote_file_exists" "scp_from_remote_to_temporary" functions in the Xen input module; therefore, nothing inherently prevents "-ip" from satisfying all ssh password requests when using input-xen. However, the Xen server still needs to permit PasswordAuthentication; sync the appropriate note from the input-vmware manual to the input-xen manual.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1854275 Signed-off-by: Laszlo Ersek <lersek@redhat.com> --- docs/virt-v2v-input-xen.pod | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/docs/virt-v2v-input-xen.pod b/docs/virt-v2v-input-xen.pod index c4948e5e0c23..8080ebea7723 100644 --- a/docs/virt-v2v-input-xen.pod +++ b/docs/virt-v2v-input-xen.pod @@ -19,7 +19,9 @@ RHEL 5 Xen, or SLES and OpenSUSE Xen hosts.
You can use SSH password authentication, by supplying the name of a file containing the password to the I<-ip> option (note this option -does I<not> take the password directly). +does I<not> take the password directly). You may need to adjust +F</etc/ssh/sshd_config> on the Xen server to set +C<PasswordAuthentication yes>.
If you are not using password authentication, an alternative is to use ssh-agent, and add your ssh public key to
Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-p2v converts physical machines to virtual machines. Boot with a live CD or over the network (PXE) and turn machines into KVM guests. http://libguestfs.org/virt-v2v
On 04/09/22 10:17, Richard W.M. Jones wrote:
On Sat, Apr 09, 2022 at 08:55:12AM +0200, Laszlo Ersek wrote:
Unlike in the VMWare input module, we don't have "remote_file_exists" "scp_from_remote_to_temporary" functions in the Xen input module; therefore, nothing inherently prevents "-ip" from satisfying all ssh password requests when using input-xen. However, the Xen server still needs to permit PasswordAuthentication; sync the appropriate note from the input-vmware manual to the input-xen manual.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1854275 Signed-off-by: Laszlo Ersek <lersek@redhat.com> --- docs/virt-v2v-input-xen.pod | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/docs/virt-v2v-input-xen.pod b/docs/virt-v2v-input-xen.pod index c4948e5e0c23..8080ebea7723 100644 --- a/docs/virt-v2v-input-xen.pod +++ b/docs/virt-v2v-input-xen.pod @@ -19,7 +19,9 @@ RHEL 5 Xen, or SLES and OpenSUSE Xen hosts.
You can use SSH password authentication, by supplying the name of a file containing the password to the I<-ip> option (note this option -does I<not> take the password directly). +does I<not> take the password directly). You may need to adjust +F</etc/ssh/sshd_config> on the Xen server to set +C<PasswordAuthentication yes>.
If you are not using password authentication, an alternative is to use ssh-agent, and add your ssh public key to
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Commit 46298c651471: 1: 44232f58ba1d ! 1: 46298c651471 input-xen: sync PasswordAuthentication hint from input-vmware manual @@ -2,7 +2,7 @@ input-xen: sync PasswordAuthentication hint from input-vmware manual - Unlike in the VMWare input module, we don't have "remote_file_exists" + Unlike in the VMWare input module, we don't have "remote_file_exists" and "scp_from_remote_to_temporary" functions in the Xen input module; therefore, nothing inherently prevents "-ip" from satisfying all ssh password requests when using input-xen. However, the Xen server still @@ -11,6 +11,9 @@ Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1854275 Signed-off-by: Laszlo Ersek <lersek@redhat.com> + Message-Id: <20220409065512.7515-1-lersek@redhat.com> + Reviewed-by: Richard W.M. Jones <rjones@redhat.com> + [lersek@redhat.com: add missing "and" to commit message] diff --git a/docs/virt-v2v-input-xen.pod b/docs/virt-v2v-input-xen.pod --- a/docs/virt-v2v-input-xen.pod Thanks! Laszlo
participants (2)
-
Laszlo Ersek -
Richard W.M. Jones