Hello Richard,

Thanks a lot for your time and response. Please find the requested details attached.

RAID-0 is the software raid level which we have configured on the HP BL Gen8 server. (While creating 1 Logical drive out of 2 physical drives  )

Best,

Shree.

On Sun, Nov 1, 2015 at 12:49 PM, Richard W.M. Jones <rjones@redhat.com> wrote:

On Sun, Nov 01, 2015 at 09:23:28AM +0530, Tejas Gadaria wrote:
> Hi Richard,
>
> Thanks for your replay,
>
> We are using Fedora 21 with SAS drive and RAID 0 config on both Physical
> and conversion server.

We're going to need a bit more information about the hardware
in the physical server, like what 'RAID 0' means - hardware RAID?
What precise RAID controller hardware?

My other advice would be to log in to the virt-p2v shell (it's
on one of the other consoles, like Alt+Ctrl+F2) and run 'dmesg'
to see what hardware the virt-p2v kernel is seeing.  If possible,
copy 'dmesg' off and post that.

Note I don't care about the conversion server - it is unlikely
to be the problem.

Rich.

--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-builder quickly builds VMs from scratch
http://libguestfs.org/virt-builder.1.html